Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- >>>sh de
- dkb0.0.0.110.0 DKB0 FUJITSU MAP3147NC 0108
- dqa0.0.0.16.0 DQA0 HL-DT-ST DVDRAM GSA-4160 A302
- dva0.0.0.0.0 DVA0
- ewa0.0.0.11.0 EWA0 00-00-F0-51-1A-6F
- pka0.7.0.10.0 PKA0 SCSI Bus ID 7
- pkb0.7.0.110.0 PKB0 SCSI Bus ID 7
- >>>b dqa0 -fl i
- (boot dqa0.0.0.16.0 -flags i)
- failed to open dqa0.0.0.16.0
- >>>b dqa0 -fl i
- (boot dqa0.0.0.16.0 -flags i)
- sense key = 0b (4e|00) from dqa0.0.0.16.0
- failed to open dqa0.0.0.16.0
- >>>b dqa0 -fl i
- (boot dqa0.0.0.16.0 -flags i)
- block 0 of dqa0.0.0.16.0 is a valid BSD boot block
- reading 158 blocks from dqa0.0.0.16.0
- bootstrap code read in
- base = 200000, image_start = 0, image_bytes = 13c00
- initializing HWRPB at 2000
- initializing page table at 3ff66000
- initializing machine state
- setting affinity to the primary CPU
- jumping to bootstrap code
- Enable Int 81
- aboot: Linux/Alpha SRM bootloader version 1.0_pre20040408
- aboot: switching to OSF/1 PALcode version 1.62
- aboot: booting from device 'IDE 0 16 0 0 0 0 0'
- aboot: no disklabel found.
- Welcome to aboot 1.0_pre20040408
- Commands:
- h, ? Display this message
- q Halt the system and return to SRM
- p 1-8 Look in partition <num> for configuration/kernel
- l List preconfigured kernels
- d <dir> List directory <dir> in current filesystem
- b <file> <args> Boot kernel in <file> (- for raw boot)
- i <file> Use <file> as initial ramdisk
- with arguments <args>
- 0-9 Boot preconfiguration 0-9 (list with 'l')
- aboot> l
- iso: Max size:40519 Log zone size:2048
- iso: First datazone:28 Root inode number 57344
- # Option 0, for generic systems, boots /boot/gentoo with the graphics console.
- # Option 1, the same, but with legacy start address (see below)
- # Option 2, the same as 0, but serial console on the first port (ttyS0)
- # Option 3, the same as 1, but serial console on the first port (ttyS0)
- #
- # Some older alphas, the ones that don't support SRM, need a special kernel,
- # with a legacy start address. If your machine does not boot with the generic
- # kernels of option 0 and 2, you may want to try option 1 or 3.
- #
- # If you want to add/change parameters, boot from the CD with -flags x
- # and enter "b", a space and the kernel name and command line you want to use
- # In aboot "menu mode" you can use several keys to look at partitions and
- # preconfigured command lines.
- #
- # For more information, consult the Gentoo alpha installation handbook.
- 0:/boot/gentoo initrd=/boot/gentoo.igz root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
- 1:/boot/gentoolegacy initrd=/boot/gentoolegacy.igz root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
- 2:/boot/gentoo initrd=/boot/gentoo.igz root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
- 3:/boot/gentoolegacy initrd=/boot/gentoolegacy.igz root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
- aboot> 2
- aboot: loading uncompressed /boot/gentoo...
- aboot: loading compressed /boot/gentoo...
- aboot: PHDR 0 vaddr 0xfffffc0001010000 offset 0x2000 size 0xd941e0
- aboot: bss at 0xfffffc0001da41e0, size 0x4365d0
- aboot: zero-filling 4416976 bytes at 0xfffffc0001da41e0
- aboot: loading initrd (4418427 bytes/4314 blocks) at 0xfffffc00ff9ac000
- aboot: starting kernel /boot/gentoo with arguments root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
- Linux version 2.6.36-gentoo-r5 (root@monolith) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.3, pie-0.4.5) ) #1 SMP Sat Feb 5 15:41:48 UTC 2011
- Booting GENERIC on Nautilus using machine vector Nautilus from SRM
- Major Options: SMP VERBOSE_MCHECK MAGIC_SYSRQ
- Command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
- memcluster 0, usage 1, start 0, end 256
- memcluster 1, usage 0, start 256, end 130994
- memcluster 2, usage 1, start 130994, end 131072
- memcluster 3, usage 0, start 131072, end 524282
- memcluster 4, usage 1, start 524282, end 524288
- freeing pages 256:2048
- freeing pages 4336:130994
- freeing pages 131072:524282
- reserving pages 4336:4344
- Initial ramdisk at: 0xfffffc00ff9ac000 (4418427 bytes)
- 8192K Bcache detected; load hit latency 18 cycles, load miss latency 165 cycles
- Iron stat_cmd 22100006
- Iron ECC c00
- initrd moved to fffffc0000200000
- irongate_init_arch: temporarily reserving region c0000000-ffff3fff for PCI
- SMP: 1 CPUs probed -- cpu_present_map = 1
- PERCPU: Embedded 5 pages/cpu @fffffc0003e02000 s11392 r8192 d21376 u65536
- pcpu-alloc: s11392 r8192 d21376 u65536 alloc=8*8192
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520698
- Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs console=ttyS0 cdroot
- PID hash table entries: 4096 (order: 2, 32768 bytes)
- Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes)
- Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes)
- Memory: 3085464k/4194256k available (5450k kernel code, 1106120k reserved, 6480k data, 440k init)
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:32784
- Using epoch = 2000
- HWRPB cycle frequency bogus. Estimated 796413737 Hz
- Console: colour VGA+ 80x25
- console [ttyS0] enabled
- initrd overwritten (0x00000100 < 0x000010f0) - disabling it.
- Calibrating delay loop... 1586.36 BogoMIPS (lpj=774144)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- SMP mode deactivated.
- Brought up 1 CPUs
- SMP: Total of 1 processors activated (1591.61 BogoMIPS).
- NET: Registered protocol family 16
- EISA bus registered
- pci 0000:00:11.0: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
- pci 0000:00:11.0: quirk: [io 0x5000-0x501f] claimed by ali7101 SMB
- pci: enabling save/restore of SRM state
- nautilus_init_pci: 819200k freed
- pci 0000:00:01.0: BAR 9: assigned [mem 0xf4000000-0xffffffff pref]
- pci 0000:00:01.0: BAR 8: assigned [mem 0xf2000000-0xf20fffff]
- pci 0000:00:0b.0: BAR 6: assigned [mem 0xf2100000-0xf213ffff pref]
- pci 0000:00:09.0: BAR 0: assigned [mem 0xf2140000-0xf215ffff]
- pci 0000:00:09.0: BAR 0: set to [mem 0xf2140000-0xf215ffff] (PCI address [0xf2140000-0xf215ffff]
- pci 0000:00:0a.0: BAR 6: assigned [mem 0xf2160000-0xf217ffff pref]
- pci 0000:00:0a.1: BAR 6: assigned [mem 0xf2180000-0xf219ffff pref]
- pci 0000:00:09.0: BAR 1: assigned [mem 0xf21a0000-0xf21affff]
- pci 0000:00:09.0: BAR 1: set to [mem 0xf21a0000-0xf21affff] (PCI address [0xf21a0000-0xf21affff]
- pci 0000:00:09.0: BAR 6: assigned [mem 0xf21b0000-0xf21bffff pref]
- pci 0000:00:01.0: BAR 7: assigned [io 0x8000-0x8fff]
- pci 0000:00:03.0: BAR 0: assigned [mem 0xf21c0000-0xf21c0fff]
- pci 0000:00:03.0: BAR 0: set to [mem 0xf21c0000-0xf21c0fff] (PCI address [0xf21c0000-0xf21c0fff]
- pci 0000:00:06.0: BAR 1: assigned [mem 0xf21c1000-0xf21c1fff]
- pci 0000:00:06.0: BAR 1: set to [mem 0xf21c1000-0xf21c1fff] (PCI address [0xf21c1000-0xf21c1fff]
- pci 0000:00:0a.0: BAR 1: assigned [mem 0xf21c2000-0xf21c2fff 64bit]
- pci 0000:00:0a.0: BAR 1: set to [mem 0xf21c2000-0xf21c2fff 64bit] (PCI address [0xf21c2000-0xf21c2fff]
- pci 0000:00:0a.1: BAR 1: assigned [mem 0xf21c3000-0xf21c3fff 64bit]
- pci 0000:00:0a.1: BAR 1: set to [mem 0xf21c3000-0xf21c3fff 64bit] (PCI address [0xf21c3000-0xf21c3fff]
- pci 0000:00:14.0: BAR 0: assigned [mem 0xf21c4000-0xf21c4fff]
- pci 0000:00:14.0: BAR 0: set to [mem 0xf21c4000-0xf21c4fff] (PCI address [0xf21c4000-0xf21c4fff]
- pci 0000:00:0b.0: BAR 1: assigned [mem 0xf21c5000-0xf21c53ff]
- pci 0000:00:0b.0: BAR 1: set to [mem 0xf21c5000-0xf21c53ff] (PCI address [0xf21c5000-0xf21c53ff]
- pci 0000:00:03.0: BAR 1: assigned [io 0x9000-0x90ff]
- pci 0000:00:03.0: BAR 1: set to [io 0x9000-0x90ff] (PCI address [0x9000-0x90ff]
- pci 0000:00:06.0: BAR 0: assigned [io 0x9400-0x94ff]
- pci 0000:00:06.0: BAR 0: set to [io 0x9400-0x94ff] (PCI address [0x9400-0x94ff]
- pci 0000:00:0a.0: BAR 0: assigned [io 0x9800-0x98ff]
- pci 0000:00:0a.0: BAR 0: set to [io 0x9800-0x98ff] (PCI address [0x9800-0x98ff]
- pci 0000:00:0a.1: BAR 0: assigned [io 0x9c00-0x9cff]
- pci 0000:00:0a.1: BAR 0: set to [io 0x9c00-0x9cff] (PCI address [0x9c00-0x9cff]
- pci 0000:00:0b.0: BAR 0: assigned [io 0xa000-0xa07f]
- pci 0000:00:0b.0: BAR 0: set to [io 0xa000-0xa07f] (PCI address [0xa000-0xa07f]
- pci 0000:00:10.0: BAR 4: assigned [io 0xa080-0xa08f]
- pci 0000:00:10.0: BAR 4: set to [io 0xa080-0xa08f] (PCI address [0xa080-0xa08f]
- pci 0000:01:05.0: BAR 0: assigned [mem 0xf8000000-0xffffffff pref]
- pci 0000:01:05.0: BAR 0: set to [mem 0xf8000000-0xffffffff pref] (PCI address [0xf8000000-0xffffffff]
- pci 0000:01:05.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
- pci 0000:01:05.0: BAR 2: assigned [mem 0xf2000000-0xf200ffff]
- pci 0000:01:05.0: BAR 2: set to [mem 0xf2000000-0xf200ffff] (PCI address [0xf2000000-0xf200ffff]
- pci 0000:01:05.0: BAR 1: assigned [io 0x8000-0x80ff]
- pci 0000:01:05.0: BAR 1: set to [io 0x8000-0x80ff] (PCI address [0x8000-0x80ff]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
- pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf20fffff]
- pci 0000:00:01.0: bridge window [mem 0xf4000000-0xffffffff pref]
- bio: create slab <bio-0> at 0
- vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- NET: Registered protocol family 2
- IP route cache hash table entries: 131072 (order: 7, 1048576 bytes)
- TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
- TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
- TCP: Hash tables configured (established 524288 bind 65536)
- TCP reno registered
- UDP hash table entries: 2048 (order: 3, 65536 bytes)
- UDP-Lite hash table entries: 2048 (order: 3, 65536 bytes)
- NET: Registered protocol family 1
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- pci 0000:00:07.0: Activating ISA DMA hang workarounds
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- msgmni has been set to 7626
- io scheduler noop registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- rtc: SRM (post-2000) epoch (2000) detected
- Real Time Clock Driver v1.12b
- radeonfb: Found Intel x86 BIOS ROM Image
- radeonfb: Retrieved PLL infos from BIOS
- radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=270.00 Mhz, System=230.00 MHz
- radeonfb: PLL min 12000 max 40000
- i2c i2c-1: unable to read EDID block.
- i2c i2c-1: unable to read EDID block.
- i2c i2c-1: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- i2c i2c-2: unable to read EDID block.
- i2c i2c-2: unable to read EDID block.
- i2c i2c-2: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- i2c i2c-3: unable to read EDID block.
- radeonfb: Monitor 1 type CRT found
- radeonfb: Monitor 2 type no found
- Console: switching to colour frame buffer device 80x30
- radeonfb (0000:01:05.0): ATI Radeon 5157 "QW"
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- Floppy drive(s): fd0 is 2.88M
- FDC 0 is a post-1991 82077
- loop: module loaded
- Compaq SMART2 Driver (v 2.6.0)
- HP CISS Driver (v 3.6.26)
- Loading iSCSI transport class v2.0-870.
- qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
- scsi0 : pata_ali
- scsi1 : pata_ali
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa080 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa088 irq 15
- Linux Tulip driver version 1.1.15 (Feb 27, 2007)
- tulip0: EEPROM default media type Autosense
- tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block
- tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block
- tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block
- tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block
- net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf21c5000, 00:00:f0:51:1a:6f, IRQ 11
- Fusion MPT base driver 3.04.17
- Copyright (c) 1999-2008 LSI Corporation
- Fusion MPT SPI Host driver 3.04.17
- ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A302, max UDMA/66
- ata1.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
- ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
- Fusion MPT FC Host driver 3.04.17
- Fusion MPT SAS Host driver 3.04.17
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd 0000:00:14.0: OHCI Host Controller
- ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- ohci_hcd 0000:00:14.0: irq 9, io mem 0xf21c4000
- ata1.00: configured for UDMA/66
- scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A302 PQ: 0 ANSI: 5
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- uhci_hcd: USB Universal Host Controller Interface driver
- r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
- sr 0:0:0:0: Attached scsi generic sg0 type 5
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- EISA: Probing bus 0 at eisa.0
- TCP cubic registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Registering the dns_resolver key type
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- atkbd serio1: keyboard reset failed on isa0060/serio1
- VFS: Cannot open root device "ram0" or unknown-block(0,0)
- Please append a correct "root=" boot option; here are the available partitions:
- 0b00 1048575 sr0 driver: sr
- Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement