# DO NOT USE NOTEPAD TO EDIT CONFIG FILES! USE NOTEPAD++ INSTEAD!
# Uncomment a line when you want to change its default value (Remove # at the beginning)
# Please ensure to leave a space after the colon if a value is needed ("example-setting" "example-setting-with: value")
# At least one account with "username", "password" as well as "location" and "gmaps-key" are required
# When your configuration is done, rename this file by removing the ".example" extension
# A different config-files can be included directly in processes by "--config-file" or "-cf" and path


# Required settings
###################

gmaps-key:  # Your Google Maps API key
auth-service: # ptc (default) or google
#username:                      # Usernames, one per account. (default=[])
#password:                      # Passwords, either single one for all accounts or one per account. (default=[])
hash-key: # 18/1/18 Key for hash server (default=None)


# Common settings
#################

#host:                          # Address to listen on (default='127.0.0.1')
port:  80                        # Port to listen on (default=5000)
accountcsv: 04thA.csv                     # Load accounts instead from a CSV file containing "auth-service,username,password" lines.
#speed-scan                     # Use speed-scan as the search scheduler.
location:                    # Location, can be an address or coordinates.
step-limit:  100                  # Steps (default=10)
#scan-delay:                    # Time delay between requests in scan threads. (default=12)
#no-gyms                        # Disables gym scanning (default=False)
#no-pokemon                     # Disables pokemon scanning. (default=False)
#no-pokestops                   # Disables pokestop scanning. (default=False)
#no-raids                       # Disables raid scanning (default=False)
print-status:  WV-Accounts                 # Enable ENTER to switch between log view and a status view.
                                # Optionally add ": status" to start in status view and ": logs" to start in log view. (default=False)
status-page-password:         # Enables and protects the /status page to view status of all workers. (default=None)
captcha-solving                # Enables captcha solving. (default=False)


# Database settings
###################

db-host:      # required for mysql
db-name: # required for mysql
db-user: # required for mysql
db-pass: # required for mysql
db-port: # default 3306
db-threads: 30                  # Number of db threads; increase if the db queue falls behind. (default=1)


# Scan method (speed-scan preferable, (default is hex-scan)
#############

#beehive                        # Use beehive configuration for multiple accounts, one account per hex.
                                # Make sure to keep -st under 5, and -w under the total amount of accounts available.
#spawnpoint-scanning            # Use spawnpoint scanning (instead of hex grid).
                                # Scans in a circle based on step_limit when on DB.
                                # A spawnpoint-file can be added optinal as value for "spawnpoint-scanning".
#dump-spawnpoints               # Dump the spawnpoints from the db to json (only for use with -ss).


# Geofence settings
###################

#geofence-file:                 # Geofence file to define outer borders of the scan area.
#geofence-excluded-file:        # File to define forbidden areas inside scan area. Regarded this as inverted geofence. Can be combined with geofence-file.


# Search settings
#################

#china                          # Coordinates transformer for China.
#no-jitter                      # Don't apply random -9m to +9m jitter to location.
#altitude:                      # Default altitude in meters. Retrieve this value regarding your scan location from the web. (default=507)
#altitude-variance:             # Variance for --altitude in meters (default=1)
#use-altitude-cache             # Query the Elevation API for each step, rather than only once, and store results in the database.
                                # Make sure your Google Elevation API is enabled
#workers-per-hive:              # Only referenced when using --beehive. Sets number of workers per hive. (default=1)
#workers:                       # Number of search worker threads to start. (default=#accounts)
#spawn-delay:                   # Number of seconds after spawn time to wait before scanning to be sure the Pokemon is there. (default=10)
kph: 32                           # Set a maximum speed in km/hour for scanner movement. (default=35)
#bad-scan-retry:                # Number of bad scans before giving up on a step. (default=2, 0 to disable)
#skip-empty                     # Enables skipping of empty cells in normal scans - requires previously populated database. (not to be used with -ss)
#min-seconds-left:              # Time that must be left on a spawn before considering it too late and skipping it. (default=0)
gym-info                       # Enables detailed gym info collection. (default=False)
pokestop-spinning              # Spin Pokestops with "50%" Chance (default=False)
account-max-spins 60              # Maximum number of Pokestop spins per hour (default=80)
#on-demand_timeout:             # Pause searching while web UI is inactive for this timeout (in seconds). (default=0)


# Account rotation
##################

login-delay: 2                   # Time delay between each login attempt. (default=6)
#login-retries:                 # Number of times to retry the login before refreshing a thread. (default=3)
#account-search-interval:       # Seconds for accounts to search before switching to a new account. (default=0)
#account-rest-interval:        # Seconds for accounts to rest when they fail or are switched out. (default=7200)
#max-failures:                  # Maximum number of failures to parse locations before an account will go into a sleep for
                                # account-rest-interval seconds. (default 5, 0 to disable)
#max-empty:                     # Maximum number of empty scans before an account will go into a sleep for
                                # account-rest-interval seconds. Reasonable to use with proxies. (default=0)


# Pokemon IV (Only use one of the filters below)
############

encounter: true               # Set to true to start encounters to pull more info, like IVs or movesets. (default false)
encounter-delay: 3            # delay in seconds before starting an encounter. Must not be zero. (default 1)
high-lvl-accounts:lv30-wv.csv    # File containing a list high level accounts, in the format "auth_service,username,password"
enc-whitelist-file:ivmon.txt  # File containing a list of Pokemon IDs to encounter for IV/CPs. Requires L30 or higher accounts in --high-lvl-accounts.
hlvl-kph: 15                     # Set a maximum speed in km/hour for high level account scanning. (default=25)


# Webserver settings
####################

#no-server                      # No-Server Mode. Starts the searcher but not the Webserver.
#only-server                    # Server-Only Mode. Starts only the Webserver without the searcher.
#locale:                        # Pokemon translation
#search-control                 # Enables search control.
#no-fixed-location              # Disables the fixed map location and shows the search bar for use in shared maps.
#cors                           # Enable CORS on web server.
#ssl-certificate:               # Path to ssl certificate
#ssl-privatekey:                # Path to ssl private key
#encrypt-lib:                   # Path to encrypt lib to be used instead of the shipped ones.
#display-in-console             # Display Found Pokemon in Console.
#disable-blacklist              # Disable the global anti-scraper IP blacklist.


# Proxy settings
################

#proxy:                         # Proxy URL e.g. socks5://127.0.0.1:9050 or a list of proxies
                                # e.g. [socks5://127.0.0.1:9050,socks5://127.0.0.1:9050]
#proxy-skip-check               # Disable checking of proxies before start.
#proxy-test-timeout:            # Timeout before proceeding with next proxy while checking if the proxy works. (default=5)
#proxy-test-retries:            # Number of times to retry sending proxy test requests on failure. (default=0)
#proxy-test-backoff-factor:     # Factor (in seconds) by which the delay until next retry will increase. (default=0.25)
#proxy-test-concurrency:        # Async requests pool size. (default=0 for automatic optimal sizing)
#proxy-display:                 # Used with -ps, full = display complete proxy address. Index = displays just the index for that proxy. (default='index')
#proxy-file:                    # Load proxy list from text file (one proxy per line), overrides #proxy.
#proxy-refresh:                 # Period of proxy file reloading, in seconds. Works only with proxy-file. (default=0, 0 to disable)
#proxy-rotation:                # Enable proxy rotation with account changing for search threads (none/round/random). (default='none')


# Webhook settings
##################

webhook: [  ] # Webhook URL e.g. http://127.0.0.1:12345 or a list for multiple webhooks [http://127.0.0.1:1345,http://127.0.0.1:12346]
                                # [http://127.0.0.1:1345,http://127.0.0.1:12346] (default=None)
wh-types:[pokemon, gym, raid, egg, tth, gym-info, pokestop, lure]                    # List of events to be sent: pokemon, gym, raid, egg, tth, gym-info, pokestop, lure. (default= nothing)
#wh-threads:                    # Number of webhook threads; increase if the webhook queue falls behind. (default=1)
#wh-retries:                    # Number of times to retry sending webhook data on failure (default=5)
#wh-timeout:                    # Timeout (in seconds) for webhook requests (default=2).
#wh-concurrency:                # Async requests pool size. (default=25)
#wh-backoff-factor:             # Factor (in seconds) by which the delay until next retry will increase. (default=0.25).
#wh-lfu-size:                   # Webhook LFU cache max size (default=1000).
#wh-frame-interval:             # Time to wait for wh message grouping (msecs) (default=500)



# Status and logs
#################

#stats-log-timer                # In log view, list per hr stats every X seconds
status-name: WolverAccount                  # Enables writing status updates to the database - if you use multiple processes, each needs a unique value. (default=None)


# Captcha Solving
#################

#captcha-key:                   # 2Captcha API key.
#captcha-dsk:                   # PokemonGo captcha data-sitekey. Don't change this if not explicitly needed due to recent changes.
                                # (default="6LeeTScTAAAAADqvhqVMhPpr_vB9D364Ia-1dSgK")
manual-captcha-domain: http://midlandstracker.zapto.org      # Enables the option to manual solve Captcha.
                                # Enter domain where captcha tokens will be sent. (default="http://127.0.0.1:5000")
manual-captcha-refresh: 60        # Time available before captcha page refreshes. (default=30)
manual-captcha-timeout: 30       # Maximum time captchas will wait for manual captcha solving.
                                # On timeout, if enabled, 2Captcha will be used to solve captcha. (default=0)


# Misc
######

#verbosity						          # Show debug messages from RocketMap and PGoApi. Values are 1,2,3 (default=0)
#no-file-logs					          # Disables logging to files except for access.log. (default=False)
#log-path						            # Defines the path logs are saved at. (default=logs/)
#no-version-check               # Disable API version check. (default=False)
#version-check-interval:        # Interval to check API version in seconds (Default: in range [60, 300]).
#mock:                          # Mock mode - point to a fpgo endpoint instead of using the real PogoApi,
                                # ec: http://127.0.0.1:9090 (default='')