Advertisement
Guest User

OEM Bootlog TP-Link Archer C50v6

a guest
Jul 31st, 2021
131
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.62 KB | None
  1. [05010C09][05010C0C]
  2. DDR Calibration DQS reg = 00008A89
  3.  
  4.  
  5. U-Boot 1.1.3 (Jul 16 2020 - 10:58:47)
  6.  
  7. Board: Ralink APSoC DRAM: 64 MB
  8. relocate_code Pointer at: 83fac000
  9. gpiomode1 54154404.
  10. gpiomode2 05540555.
  11. flash manufacture id: ef, device id 40 17
  12. find flash: W25Q64BV
  13. ============================================
  14. Ralink UBoot Version: 4.3.0.0
  15. --------------------------------------------
  16. ASIC 7628_MP (Port5<->None)
  17. DRAM component: 512 Mbits DDR, width 16
  18. DRAM bus: 16 bit
  19. Total memory: 64 MBytes
  20. Flash component: SPI Flash
  21. Date:Jul 16 2020 Time:10:58:47
  22. ============================================
  23. icache: sets:512, ways:4, linesz:32 ,total:65536
  24. dcache: sets:256, ways:4, linesz:32 ,total:32768
  25.  
  26. ##### The CPU freq = 580 MHZ ####
  27. estimate memory size =64 Mbytes
  28. RESET MT7628 PHY!!!!!!gpiomode2 00000555.
  29.  
  30. continue to starting system. 0
  31.  
  32.  
  33. U-Boot 1.1.3 (Jan 11 2021 - 10:01:24)
  34.  
  35. Board: Ralink APSoC DRAM: 64 MB
  36. relocate_code Pointer at: 83fb8000
  37. gpiomode1 54154404.
  38. gpiomode2 00000555.
  39. flash manufacture id: ef, device id 40 17
  40. find flash: W25Q64BV
  41. ============================================
  42. Ralink UBoot Version: 4.3.0.0
  43. --------------------------------------------
  44. ASIC 7628_MP (Port5<->None)
  45. DRAM component: 512 Mbits DDR, width 16
  46. DRAM bus: 16 bit
  47. Total memory: 64 MBytes
  48. Flash component: SPI Flash
  49. Date:Jan 11 2021 Time:10:01:24
  50. ============================================
  51. icache: sets:512, ways:4, linesz:32 ,total:65536
  52. dcache: sets:256, ways:4, linesz:32 ,total:32768
  53.  
  54. ##### The CPU freq = 580 MHZ ####
  55. estimate memory size =64 Mbytes
  56. RESET MT7628 PHY!!!!!!
  57. continue to starting system. 0
  58. disable switch phyport...
  59.  
  60. 3: System Boot system code via Flash.(0xbc050000)
  61. do_bootm:argc=2, addr=0xbc050000
  62. ## Booting image at bc050000 ...
  63. Uncompressing Kernel Image ... OK
  64. No initrd
  65. ## Transferring control to Linux (at address 8000c150) ...
  66. ## Giving linux memsize in MB, 64
  67.  
  68. Starting kernel ...
  69.  
  70.  
  71. LINUX started...
  72.  
  73. THIS IS ASIC
  74. Linux version 2.6.36 (jenkins@mobile-System) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 Mon Jan 11 10:06:31 CST 2021
  75.  
  76. The CPU feqenuce set to 575 MHz
  77.  
  78. MIPS CPU sleep mode enabled.
  79. CPU revision is: 00019655 (MIPS 24Kc)
  80. Software DMA cache coherency
  81. Determined physical RAM map:
  82. memory: 04000000 @ 00000000 (usable)
  83. Initrd not found or empty - disabling initrd
  84. Zone PFN ranges:
  85. Normal 0x00000000 -> 0x00004000
  86. Movable zone start PFN for each node
  87. early_node_map[1] active PFN ranges
  88. 0: 0x00000000 -> 0x00004000
  89. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  90. Kernel command line: console=ttyS1,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init
  91. PID hash table entries: 256 (order: -2, 1024 bytes)
  92. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  93. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  94. Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes.
  95. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  96. Writing ErrCtl register=0002e00d
  97. Readback ErrCtl register=0002e00d
  98. Memory: 61268k/65536k available (2524k kernel code, 4268k reserved, 675k data, 164k init, 0k highmem)
  99. NR_IRQS:128
  100. console [ttyS1] enabled
  101. Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
  102. pid_max: default: 4096 minimum: 301
  103. Mount-cache hash table entries: 512
  104. NET: Registered protocol family 16
  105. RALINK_GPIOMODE = 54154404
  106. RALINK_GPIOMODE = 54144404
  107. ***** Xtal 40MHz *****
  108. start PCIe register access
  109. RALINK_RSTCTRL = 2400000
  110. RALINK_CLKCFG1 = fdbfffc0
  111.  
  112. *************** MT7628 PCIe RC mode *************
  113. PCIE0 enabled
  114. Port 0 N_FTS = 1b105000
  115. init_rt2880pci done
  116. bio: create slab <bio-0> at 0
  117. vgaarb: loaded
  118. pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
  119. pci 0000:00:00.0: BAR 9: assigned [mem 0x20000000-0x201fffff pref]
  120. pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
  121. pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
  122. pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
  123. pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff 64bit pref] (PCI address [0x20000000-0x200fffff]
  124. pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref]
  125. pci 0000:01:00.0: BAR 2: set to [mem 0x20100000-0x20103fff 64bit pref] (PCI address [0x20100000-0x20103fff]
  126. pci 0000:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref]
  127. pci 0000:01:00.0: BAR 4: set to [mem 0x20104000-0x20104fff 64bit pref] (PCI address [0x20104000-0x20104fff]
  128. pci 0000:00:00.0: PCI bridge to [bus 01-01]
  129. pci 0000:00:00.0: bridge window [io disabled]
  130. pci 0000:00:00.0: bridge window [mem disabled]
  131. pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff pref]
  132. BAR0 at slot 0 = 0
  133. bus=0x0, slot = 0x0
  134. res[0]->start = 0
  135. res[0]->end = 0
  136. res[1]->start = 20200000
  137. res[1]->end = 2020ffff
  138. res[2]->start = 0
  139. res[2]->end = 0
  140. res[3]->start = 0
  141. res[3]->end = 0
  142. res[4]->start = 0
  143. res[4]->end = 0
  144. res[5]->start = 0
  145. res[5]->end = 0
  146. bus=0x1, slot = 0x0
  147. res[0]->start = 20000000
  148. res[0]->end = 200fffff
  149. res[1]->start = 0
  150. res[1]->end = 0
  151. res[2]->start = 20100000
  152. res[2]->end = 20103fff
  153. res[3]->start = 0
  154. res[3]->end = 0
  155. res[4]->start = 20104000
  156. res[4]->end = 20104fff
  157. res[5]->start = 0
  158. res[5]->end = 0
  159. Switching to clocksource Ralink Systick timer
  160. NET: Registered protocol family 2
  161. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  162. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  163. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  164. TCP: Hash tables configured (established 2048 bind 2048)
  165. TCP reno registered
  166. NET: Registered protocol family 1
  167. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  168. fuse init (API version 7.15)
  169. msgmni has been set to 119
  170. io scheduler noop registered
  171. io scheduler deadline registered (default)
  172. Ralink gpio driver initialized
  173. i2cdrv_major = 218
  174. Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
  175. serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A
  176. serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
  177. brd: module loaded
  178. flash manufacture id: ef, device id 40 17
  179. W25Q64BV(ef 40170000) (8192 Kbytes)
  180. mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
  181. Creating 7 MTD partitions on "raspi":
  182. 0x000000030000-0x000000050000 : "boot"
  183. 0x000000050000-0x000000190000 : "kernel"
  184. 0x000000190000-0x0000007c0000 : "rootfs"
  185. mtd: partition "rootfs" set to be root filesystem
  186. 0x0000007c0000-0x0000007d0000 : "config"
  187. 0x0000007d0000-0x0000007e0000 : "romfile"
  188. 0x0000007e0000-0x0000007f0000 : "rom"
  189. 0x0000007f0000-0x000000800000 : "radio"
  190. Register flash device:flash0
  191. PPP generic driver version 2.4.2
  192. PPP MPPE Compression module registered
  193. NET: Registered protocol family 24
  194. Mirror/redirect action on
  195. u32 classifier
  196. Actions configured
  197. Netfilter messages via NETLINK v0.30.
  198. nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  199. ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
  200. TCP cubic registered
  201. NET: Registered protocol family 10
  202. ip6_tables: (C) 2000-2006 Netfilter Core Team
  203. IPv6 over IPv4 tunneling driver
  204. NET: Registered protocol family 17
  205. Ebtables v2.0 registered
  206. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  207. All bugs added by David S. Miller <davem@redhat.com>
  208. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  209. Freeing unused kernel memory: 164k freed
  210. starting pid 688, tty '': '/etc/init.d/rcS'
  211. rdm_major = 253
  212. spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
  213. Read MAC from flash( 7df100) ffffff90-ffffff9a-4a-ffffff87-72-ffffffa4
  214. GMAC1_MAC_ADRH -- : 0x0000909a
  215. GMAC1_MAC_ADRL -- : 0x4a8772a4
  216. Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500!
  217. NAPI enable, Tx Ring = 256, Rx Ring = 256
  218. spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
  219. Read MAC from flash( 7df100) ffffff90-ffffff9a-4a-ffffff87-72-ffffffa4
  220. GMAC1_MAC_ADRH -- : 0x0000909a
  221. GMAC1_MAC_ADRL -- : 0x4a8772a4
  222. PROC INIT OK!
  223. add domain:tplinkwifi.net
  224. add domain:tplinkap.net
  225. add domain:tplinkrepeater.net
  226. add domain:tplinklogin.net
  227. tp_domain init ok
  228. L2TP core driver, V2.0
  229. PPPoL2TP kernel driver, V2.0
  230. Set: phy[0].reg[0] = 3900
  231. Set: phy[1].reg[0] = 3900
  232. Set: phy[2].reg[0] = 3900
  233. Set: phy[3].reg[0] = 3900
  234. Set: phy[4].reg[0] = 3900
  235. Set: phy[0].reg[0] = 3300
  236. Set: phy[1].reg[0] = 3300
  237. Set: phy[2].reg[0] = 3300
  238. Set: phy[3].reg[0] = 3300
  239. Set: phy[4].reg[0] = 3300
  240. resetMiiPortV over.
  241. Set: phy[0].reg[4] = 01e1
  242. Set: phy[0].reg[0] = 3300
  243. Set: phy[1].reg[4] = 01e1
  244. Set: phy[1].reg[0] = 3300
  245. Set: phy[2].reg[4] = 01e1
  246. Set: phy[2].reg[0] = 3300
  247. Set: phy[3].reg[4] = 01e1
  248. Set: phy[3].reg[0] = 3300
  249. Set: phy[4].reg[4] = 01e1
  250. Set: phy[4].reg[0] = 3300
  251. turn off flow control over.
  252. starting pid 751, tty '/dev/ttyS1': '/bin/sh'
  253. ~ # [ util_execSystem ] 141: ipt_init cmd is "/var/tmp/dconf/rc.router"
  254.  
  255. [ dm_readFile ] 2061: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
  256. spiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000
  257. spiflash_ioctl_read, Read from 0x007c0000 length 0xa160, ret 0, retlen 0xa160
  258. spiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
  259. [ util_execSystem ] 141: cos_init cmd is "cp -pR /etc/web/EU/* /var/tmp/pc/web/"
  260.  
  261. ===>Enter Routerspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
  262. mode
  263. [ oal_sys_readMaspiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4
  264. cFlash ] 1958: spiflash_ioctl_read, Read from 0x007df300 length 0x4, ret 0, retlen 0x4
  265. 7df100 set flasspiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
  266. h mac : 90:9A:4Aspiflash_ioctl_read, Read from 0x007df500 length 0x29, ret 0, retlen 0x29
  267. :87:72:A4.
  268. spiflash_ioctl_read, Read from 0x007df600 length 0x21, ret 0, retlen 0x21
  269. spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
  270. spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
  271. spiflash_ioctl_read, Read from 0x00050000 length 0x1d0, ret 0, retlen 0x1d0
  272. spiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
  273. spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
  274. [ oal_sys_readMacFlash ] 1958: 7df100 set flash mac : 90:9A:4A:87:72:A4.
  275. [ util_execSystem ] 141: oal_sys_setLanguage cmd is "rm -fr /var/tmp/web ; ln -s /web/locale/en_US /var/tmp/web"
  276.  
  277. sh: ln: not found
  278. sendto: No such file or directory
  279. pid 750 send 2001 error
  280. [ util_execSystem ] 141: oal_startDynDns cmd is "dyndns /var/tmp/dconf/dyndns.conf"
  281.  
  282. Get SNTP new config
  283. [ util_execSystem ] 141: oal_startNoipDns cmd is "noipdns /var/tmp/dconf/noipdns.conf"
  284.  
  285. [ util_execSystem ] 141: oal_startCmxDns cmd is "cmxdns /var/tmp/dconf/cmxdns.conf"
  286.  
  287. ioctl: No such device
  288. [ util_execSystem ] 141: oal_br_addBridge cmd is "brctl addbr br0;brctl setfd br0 0;brctl stp br0 off"
  289.  
  290. [ util_execSystem ] 141: oal_ipt_addLanRules cmd is "iptables -t filter -A INPUT -i br+ -j ACCEPT
  291. "
  292.  
  293. [ util_execSystem ] 141: oal_intf_setIntf cmd is "ifconfig br0 192.168.0.1 netmask 255.255.255.0 up"
  294.  
  295. [ util_execSystem ] 141: oal_util_setProcLanAddr cmd is "echo "br0 16820416," > /proc/net/conntract_LocalAddrRaeth v3.1 ("
  296.  
  297. [ util_execNAPI
  298. System ] 141: o,SkbRecycleal_intf_enableIn)
  299. tf cmd is "ifcon
  300. phy_tx_ring = 0x030e5000, tx_ring = 0xa30e5000
  301. fig eth0 up"
  302.  
  303.  
  304. phy_rx_ring0 = 0x030e6000, rx_ring0 = 0xa30e6000
  305. [fe_sw_init:5357]rt305x_esw_init.
  306. disable switch phyport...
  307. GMAC1_MAC_ADRH -- : 0x0000909a
  308. GMAC1_MAC_ADRL -- : 0x4a8772a4
  309. RT305x_ESW: Link Status Changed
  310. [ rsl_getUnusedVlan ] 1099: GET UNUSED VLAN TAG 1 : [3]
  311. [ rsl_getUnusedVlan ] 1099: GET UNUSED VLAN TAG 2 : [4]
  312. [ rsl_getUnusedVlan ] 1099: GET UNUSED VLAN TAG 3 : [5]
  313. [ rsl_getUnusedVlan ] 1099: GET UNUSED VLAN TAG 4 : [6]
  314. [ util_execSystem ] 141: oal_addVlanTagIntf cmd is "vconfig add eth0 3"
  315.  
  316. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.3 up"
  317.  
  318. set if eth0.3 to *not wan dev
  319. [ util_execSystem ] 141: oal_addVlanTagIntf cmd is "vconfig add eth0 4"
  320.  
  321. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.4 up"
  322.  
  323. set if eth0.4 to *not wan dev
  324. [ util_execSystem ] 141: oal_addVlanTagIntf cmd is "vconfig add eth0 5"
  325.  
  326. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.5 up"
  327.  
  328. set if eth0.5 to *not wan dev
  329. [ util_execSystem ] 141: oal_addVlanTagIntf cmd is "vconfig add eth0 6"
  330.  
  331. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.6 up"
  332.  
  333. set if eth0.6 to *not wan dev
  334. [ util_edevice eth0.3 entered promiscuous mode
  335. xecSystem ] 141:device eth0 entered promiscuous mode
  336. oal_addVlanTagbr0: port 1(eth0.3) entering forwarding state
  337. Intf cmd is "vcobr0: port 1(eth0.3) entering forwarding state
  338. nfig add eth0 2"
  339.  
  340. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfdevice eth0.4 entered promiscuous mode
  341. ig eth0.2 up"
  342. br0: port 2(eth0.4) entering forwarding state
  343.  
  344. set if eth0.2 tbr0: port 2(eth0.4) entering forwarding state
  345. o wan dev
  346. [ vlan_addLanPortsIntoBridge ] 606: add lan Port 255 from br0
  347. [ utidevice eth0.5 entered promiscuous mode
  348. l_execSystem ] 1br0: port 3(eth0.5) entering forwarding state
  349. 41: oal_br_addIbr0: port 3(eth0.5) entering forwarding state
  350. ntfIntoBridge cmd is "brctl addif br0 eth0.3"
  351.  
  352. [ util_execSystem ] 141: oal_bdevice eth0.6 entered promiscuous mode
  353. r_addIntfIntoBribr0: port 4(eth0.6) entering forwarding state
  354. dge cmd is "brctbr0: port 4(eth0.6) entering forwarding state
  355. l addif br0 eth0.4"
  356.  
  357. [ util_execSystem ] 141: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.5"
  358.  
  359. [ util_execSystem ] 141: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.6"
  360.  
  361. [ util_execSystem ] 141: rsl_initIPv6CfgObj cmd is "echo 0 > /proc/sys/net/ipv6/conf/all/disable_ipv6"
  362.  
  363. [ util_execSystem ] 141: oal_eth_setIGMPSnoopParam cmd is "for i in /sys/devices/virtual/net/*/bridge/multicast_snooping;do echo 1 > $i ; done"
  364.  
  365. spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
  366. [ util_execSystem ] 141: oal_wlan_ra_setCountryRegion cmd is "cp /etc/SingleSKU_CE.dat /var/Wireless/RT2860AP/SingleSKU.dat"
  367.  
  368. [ util_execSystem ] 141: oal_wlan_ra_setCountryRegion cmd is "iwpriv ra0 set CountryRegion=1"
  369.  
  370. ra0 no privatspiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
  371. e ioctls.
  372.  
  373. [ util_execSystem ] 141: oal_wlan_ra_updateSkuByIsoName cmd is "if [ -e /etc/SingleSKU_DE.dat ]; then cp /etc/SingleSKU_DE.dat /var/Wireless/RT2860AP/SingleSKU.dat; fi"
  374.  
  375. [ util_execSystem ] 141: oal_wlan_ra_loadDriver cmd is "insmod /lib/modules/kmdir/kernel/drivers/net/wireless/mt_wifi_ap/mt_wifi.ko"
  376.  
  377. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "ifconfig ra0 up"
  378.  
  379. [RTMPReadParametersHook:297]wifi read profile faild.
  380. efuse_probe: efuse = 10000012
  381. exec!
  382. spiflash_ioctl_read, Read from 0x007f0000 length 0x400, ret 0, retlen 0x400
  383. eeFlashId = 0x7628!
  384. tssi_1_target_pwr_g_band = 34
  385. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "echo 1 > /proc/tplink/led_wlan_24G"
  386.  
  387. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "iwpriv ra0 set ed_chk=0"
  388.  
  389. [ util_execSystem ] 141: oal_wlan_ra_setStaNum cmd is "iwpriv ra0 set MaxStaNum=32"
  390.  
  391. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "iwpriv ra0 set tpc_duty=100-80-80-80"
  392.  
  393. [ oal_wlan_ra_initWlan ] 2494: cmd: iwpriv ra0 set tpc_duty=100-80-80-80
  394. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "iwpridevice ra0 entered promiscuous mode
  395. v ra0 set tpc=h_br0: port 5(ra0) entering forwarding state
  396. en-1_h_th-110_l_br0: port 5(ra0) entering forwarding state
  397. en-1_l_th-103_chkt-30"
  398.  
  399. [ oal_wlan_ra_initWlan ] 2497: cmd: iwpriv ra0 set tpdevice apcli0 entered promiscuous mode
  400. c=h_en-1_h_th-110_l_en-1_l_th-103_chkt-30
  401. [ util_execSystem ] 141: oal_br_addIdevice ra1 entered promiscuous mode
  402. ntfIntoBridge cmd is "brctl addif br0 ra0"
  403.  
  404. [ util_execSystem ] 141: oal_br_addIntfIntoBridgespiflash_ioctl_read, Read from 0x007f0000 length 0x2, ret 0, retlen 0x2
  405. cmd is "brctl addif br0 apcli0"
  406.  
  407. [ util_execSystem ] 141: oal_br_addIntfIntoBridge cmd is "brctl addif br0 ra1"
  408.  
  409. [ util_execSystem ] 141: oal_wlan_ra_initEnd cmd is "wlNetlinkTool &"
  410.  
  411. [ util_execSystem ] 141: oal_wlan_ra_initEnd cmd is "killall -q wscd"
  412.  
  413. [ util_execSystem ] 141: oal_wlan_ra_initEnd cmd is "wscd -i ra0 -m 1 -w /var/tmp/wsc_upnp/ &"
  414.  
  415. [ util_execSystem ] 141: rsl_initLanWlanObj cmd is "echo 0 > /proc/tplink/wl_mode"
  416.  
  417. WLAN-Start wlNetlinkTool
  418. Waiting for Wireless Events from interspiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
  419. faces...
  420. swWlanChkAhbErr: netlink to do
  421. [ util_execSystem ] 141: oal_wlan_ra_setCountryRegion cmd is "cp /etc/SingleSKU_5G_CE.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat"
  422.  
  423. [ util_execSystem ] 141: oal_wlan_ra_setCountryRegion cmd is "iwpriv rai0 set CountryRegionABand=6"
  424.  
  425. rai0 no privatespiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
  426. ioctls.
  427.  
  428. [ util_execSystem ] 141: oal_wlan_ra_updateSkuByIsoName cmd is "if [ -e /etc/SingleSKU_5G_DE.dat ]; then cp /etc/SingleSKU_5G_DE.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat; fi"
  429.  
  430. wscd: SSDP UDP PORT = 1900
  431. [ util_execSystem ] 141: oal_wlan_ra_loadDriver cmd is "insmod /lib/modules/kmdir/kernel/drivers/net/wireless/MT7613_ap/MT7613_ap.ko"
  432.  
  433. register mt_drv
  434.  
  435.  
  436. === pAd = c1382000, size = 3724064 ===
  437.  
  438. <-- RTMPAllocAdapterBlock, Status=0
  439. pAd->PciHif.CSRBaseAddress =0xc1280000, csr_addr=0xc1280000!
  440. RTMPInitPCIeDevice():device_id=0x7663
  441. mt_pci_chip_cfg(): HWVer=0x8b10, FWVer=0x8a01, pAd->ChipID=0x7663
  442. mt7663_init()-->
  443. <--mt7663_init()
  444. <-- RTMPAllocTxRxRingMemory, Status=0
  445. get_wdev_by_idx: invalid idx(0)
  446. get_wdev_by_idx: invalid idx(0)
  447. get_wdev_by_idx: invalid idx(0)
  448. get_wdev_by_idx: invalid idx(0)
  449. get_wdev_by_idx: invalid idx(0)
  450. get_wdev_by_idx: invalid idx(0)
  451. get_wdev_by_idx: invalid idx(0)
  452. [ oal_wlan_ra_loadDriver ] 2117: insmod MT7613 ap.
  453.  
  454.  
  455. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "rai0: ===> main_virtual_if_open
  456. ifconfig rai0 upget_wdev_by_idx: invalid idx(0)
  457. "
  458.  
  459. get_wdev_by_idx: invalid idx(0)
  460. get_wdev_by_idx: invalid idx(0)
  461. get_wdev_by_idx: invalid idx(0)
  462. load l1profile succeed!
  463. get_wdev_by_idx: invalid idx(0)
  464. get_wdev_by_idx: invalid idx(0)
  465. driver_own()::Try to Clear FW Own...
  466. driver_own()::Success to clear FW Own
  467. RtmpOSFileOpen(): Error 2 opening /etc/Wireless/iNIC/iNIC_ap_2G.dat
  468. Open file "/etc/Wireless/iNIC/iNIC_ap_2G.dat" failed!
  469. E2pAccessMode=2
  470. SSID[0]=TP-Link_72A4_5G, EdcaIdx=0
  471. SSID[1]=TP-Link_Guest_72A4_5G, EdcaIdx=0
  472. cfg_mode=14
  473. cfg_mode=14
  474. cfg_mode=14
  475. wmode_band_equal(): Band Equal!
  476. MT7613->wifi call wnm read paramters file
  477. [TxPower] BAND0: 100
  478. [SKUenable] BAND0: 1
  479. [PERCENTAGEenable] BAND0: 0
  480. [BFBACKOFFenable] BAND0: 0
  481. profile: FragThreshold[0]=2346
  482. APEdca0
  483. APEdca1
  484. APEdca2
  485. APEdca3
  486. APSDCapable[0]=0
  487. APSDCapable[1]=0
  488. APSDCapable[2]=0
  489. APSDCapable[3]=0
  490. APSDCapable[4]=0
  491. APSDCapable[5]=0
  492. APSDCapable[6]=0
  493. APSDCapable[7]=0
  494. APSDCapable[8]=0
  495. APSDCapable[9]=0
  496. APSDCapable[10]=0
  497. APSDCapable[11]=0
  498. APSDCapable[12]=0
  499. APSDCapable[13]=0
  500. APSDCapable[14]=0
  501. APSDCapable[15]=0
  502. default ApCliAPSDCapable[0]=0
  503. read_itxbf: ITxBfEn = 1
  504. read_itxbf: BSSID[0]
  505. read_itxbf: MBSS[0] ITxBfEn = 1
  506. read_itxbf: ITxBfEn = 1
  507. read_itxbf: BSSID[1]
  508. read_itxbf: MBSS[1] ITxBfEn = 1
  509. read_itxbf: ITxBfEn = 1
  510. read_itxbf: MBSS[2] ITxBfEn = 1
  511. read_itxbf: ITxBfEn = 1
  512. read_itxbf: MBSS[3] ITxBfEn = 1
  513. read_itxbf: Common.ITxBfEn = 1
  514. read_etxbf: ETxBfEnCond = 1
  515. read_etxbf: BSSID[0]
  516. read_etxbf: MBSS[0] ETxBfEnCond = 1
  517. read_etxbf: ETxBfEnCond = 1
  518. read_etxbf: BSSID[1]
  519. read_etxbf: MBSS[1] ETxBfEnCond = 1
  520. read_etxbf: ETxBfEnCond = 1
  521. read_etxbf: MBSS[2] ETxBfEnCond = 1
  522. read_etxbf: ETxBfEnCond = 1
  523. read_etxbf: MBSS[3] ETxBfEnCond = 1
  524. AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
  525. AndesSendCmdMsg: Command type = ed, Extension command type = 48
  526. HT: WDEV[0] Ext Channel = BELOW
  527. WtcSetMaxStaNum: MaxStaNum:106, BssidNum:2, WdsNum:0, ApcliNum:1, MaxNumChipRept:24, MSTANum:1, MaxUcastEntryNum:132, MinMcastWcid:132
  528. Top Init Done!
  529. Use dev_alloc_skb
  530. RX[0] DESC a18b3000 size = 2048
  531. RX[1] DESC a18b4000 size = 2048
  532. cut_through_init(): ct sw token number = 2047
  533. cut_through_token_list_init(): TokenList inited done!id_head/tail=0/2048
  534. cut_through_token_list_init(): 8194af88,8194af88
  535. cut_through_token_list_init(): TokenList inited done!id_head/tail=0/2048
  536. cut_through_token_list_init(): 8194af90,8194af90
  537. Hif Init Done!
  538. ctl->txq = c170d940
  539. ctl->rxq = c170d948
  540. ctl->ackq = c170d950
  541. ctl->kickq = c170d958
  542. ctl->tx_doneq = c170d960
  543. ctl->rx_doneq = c170d968
  544. mt7663_fw_prepare():using E2 ROM patch
  545. mt7663_fw_prepare():using E2 firmware
  546. Parsing patch header
  547. Built date: 2008041306023eb
  548.  
  549. Platform: 7663
  550. HW/SW version: 0x6d702d31
  551. Patch version: 0x3830328a
  552. Target address: 0xdc000, length: 204112
  553. patch is not ready && get semaphore success
  554. Start address = 0xdc000, DL length = 204112, Data mode = 0x80000000
  555. EventGenericEventHandler: CMD Success
  556. MtCmdAddressLenReq:(ret = 0)
  557. MtCmdPatchFinishReq
  558. EventGenericEventHandler: CMD Success
  559. release patch semaphore
  560. Parsing CPU 0 fw tailer
  561. Chip ID: 0x08
  562. Eco version: 0x01
  563. Region number: 0x03
  564. Format version: 0x02
  565. Format flag: 0x01
  566. Ram version: 7663mp1827
  567. Built date: 20200804130753
  568. Common crc: 0xcbf73620
  569. Parsing tailer region 0
  570. Decomp crc: 0x0
  571. Decomp size: 0x0
  572. Decomp block size: 0x0
  573. Target address: 0x112c00
  574. Download size: 277856
  575. Feature set: 0x27
  576. Parsing tailer region 1
  577. Decomp crc: 0x0
  578. Decomp size: 0x0
  579. Decomp block size: 0x0
  580. Target address: 0x2018400
  581. Download size: 70848
  582. Feature set: 0x07
  583. Parsing tailer region 2
  584. Decomp crc: 0x0
  585. Decomp size: 0x0
  586. Decomp block size: 0x0
  587. Target address: 0x40100000
  588. Download size: 14720
  589. Feature set: 0x07
  590. Release info: header tag = 0, total length = 0
  591. Start address = 0x112c00, DL length = 277856, Data mode = 0x8000000f
  592. EventGenericEventHandler: CMD Success
  593. MtCmdAddressLenReq:(ret = 0)
  594. Start address = 0x2018400, DL length = 70848, Data mode = 0x8000000f
  595. EventGenericEventHandler: CMD Success
  596. MtCmdAddressLenReq:(ret = 0)
  597. Start address = 0x40100000, DL length = 14720, Data mode = 0x8000000f
  598. EventGenericEventHandler: CMD Success
  599. MtCmdAddressLenReq:(ret = 0)
  600. MtCmdFwStartReq: override = 0x1, address = 0x112c00
  601. EventGenericEventHandler: CMD Success
  602. MCU Init Done!
  603. efuse_probe: efuse = 511161
  604. RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
  605. RtmpEepromGetDefault::e2p_dafault=1
  606. RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
  607. NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x7F8000]
  608.  
  609. #### read 5G cal from flash !! ####
  610. spiflash_ioctl_read, Read from 0x007f0000 length 0x10000, ret 0, retlen 0x10000
  611. validFlashEepromID(): eeFlashId=7663, pAd->ChipID=7663
  612. Country Region from e2p = 0
  613. mt7663_antenna_default_reset() todo
  614. RTMPReadTxPwrPerRate(444): Don't Support this now!
  615. RcRadioInit(): DbdcMode=0, ConcurrentBand=1
  616. RcRadioInit(): pRadioCtrl=829a0d18,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
  617. AntCfgInit(2929): Not support for HIF_MT yet!
  618. MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
  619. MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
  620. EEPROM Init Done!
  621. mt_mac_init()-->
  622. mt_mac_pse_init(2958): Don't Support this now!
  623. mt7663_init_mac_cr()-->
  624. mt7663_init_mac_cr(): TMAC_TRCR0=0x82783c92
  625. MtAsicSetMacMaxLen(1073): Not support for HIF_MT yet!
  626. <--mt_mac_init()
  627. CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
  628. CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
  629. CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
  630. MAC Init Done!
  631. MT7663BBPInit():BBP Initialization.....
  632. Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
  633. Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
  634. MT7663BBPInit() todo
  635. PHY Init Done!
  636. RtmpOSFileOpen(): Error 2 opening /etc/Wireless/iNIC/iNIC_ap_2G.dat
  637. Open file "/etc/Wireless/iNIC/iNIC_ap_2G.dat" failed!
  638. E2pAccessMode=2
  639. SSID[0]=TP-Link_72A4_5G, EdcaIdx=0
  640. SSID[1]=TP-Link_Guest_72A4_5G, EdcaIdx=0
  641. cfg_mode=14
  642. cfg_mode=14
  643. cfg_mode=14
  644. wmode_band_equal(): Band Equal!
  645. MT7613->wifi call wnm read paramters file
  646. [TxPower] BAND0: 100
  647. [SKUenable] BAND0: 1
  648. [PERCENTAGEenable] BAND0: 0
  649. [BFBACKOFFenable] BAND0: 0
  650. profile: FragThreshold[0]=2346
  651. APEdca0
  652. APEdca1
  653. APEdca2
  654. APEdca3
  655. APSDCapable[0]=0
  656. APSDCapable[1]=0
  657. APSDCapable[2]=0
  658. APSDCapable[3]=0
  659. APSDCapable[4]=0
  660. APSDCapable[5]=0
  661. APSDCapable[6]=0
  662. APSDCapable[7]=0
  663. APSDCapable[8]=0
  664. APSDCapable[9]=0
  665. APSDCapable[10]=0
  666. APSDCapable[11]=0
  667. APSDCapable[12]=0
  668. APSDCapable[13]=0
  669. APSDCapable[14]=0
  670. APSDCapable[15]=0
  671. default ApCliAPSDCapable[0]=0
  672. read_itxbf: ITxBfEn = 1
  673. read_itxbf: BSSID[0]
  674. read_itxbf: MBSS[0] ITxBfEn = 1
  675. read_itxbf: ITxBfEn = 1
  676. read_itxbf: BSSID[1]
  677. read_itxbf: MBSS[1] ITxBfEn = 1
  678. read_itxbf: ITxBfEn = 1
  679. read_itxbf: MBSS[2] ITxBfEn = 1
  680. read_itxbf: ITxBfEn = 1
  681. read_itxbf: MBSS[3] ITxBfEn = 1
  682. read_itxbf: Common.ITxBfEn = 1
  683. read_etxbf: ETxBfEnCond = 1
  684. read_etxbf: BSSID[0]
  685. read_etxbf: MBSS[0] ETxBfEnCond = 1
  686. read_etxbf: ETxBfEnCond = 1
  687. read_etxbf: BSSID[1]
  688. read_etxbf: MBSS[1] ETxBfEnCond = 1
  689. read_etxbf: ETxBfEnCond = 1
  690. read_etxbf: MBSS[2] ETxBfEnCond = 1
  691. read_etxbf: ETxBfEnCond = 1
  692. read_etxbf: MBSS[3] ETxBfEnCond = 1
  693. HT: WDEV[0] Ext Channel = BELOW
  694. tx_pwr_comp_init():NotSupportYet!
  695. MtCmdSetMacTxRx:(ret = 0)
  696. asic_bss_beacon_init(): NotSupportedFunc for this arch(HIF_MT)!
  697. MtAsicSetChBusyStat(646): Not support for HIF_MT yet!
  698. AsicDisableSync(): NotSupportedFunc for this arch(HIF_MT)!
  699. MtAsicSetRalinkBurstMode(2219): Not support for HIF_MT yet!
  700. MtAsicSetPiggyBack(590): Not support for HIF_MT yet!
  701. WifiFwdSet::disabled=0
  702. AsicSetPreTbtt(): NotSupportedFunc for this arch(HIF_MT)!
  703. Main bssid = 00:00:00:00:00:00
  704. AsicSetRxFilter(): NotSupportedFunc for this arch(HIF_MT)!
  705. MtCmdSetMacTxRx:(ret = 0)
  706. AsicSetRxFilter(): NotSupportedFunc for this arch(HIF_MT)!
  707. MtCmdSetMacTxRx:(ret = 0)
  708. INIT REDUCE TCP ACK, rai0
  709. <==== mt_wifi_init, Status=0
  710. TxBfModuleEnCtrl:It's not DBDC mode
  711. MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
  712. MSTA_Init (1) ---> ApCli
  713. Register MSTA IF (apclii0) , pAd->MSTANum = 1
  714. Caller: SetCommonHT+0xf4/0x160 [MT7613_ap]
  715.  
  716. phy_mode=49, ch=0, wdev_type=2
  717. ht_cap: ht_cap->HtCapInfo,
  718. ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=0,rx_stbc=0,amsdu_size=0
  719. ht_cap: ht_cap->HtCapParm,
  720. mdpu_density=0, ampdu_factor=3
  721. WtcSetMaxStaNum: MaxStaNum:106, BssidNum:2, WdsNum:0, ApcliNum:1, MaxNumChipRept:24, MSTANum:1, MaxUcastEntryNum:132, MinMcastWcid:132
  722. cp_support_is_enabled: set Driver CP_SUPPORT to Mode 2.
  723. RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
  724. wifi_sys_open(), wdev idx = 0
  725. wdev_attr_update(): wdevId0 = 90:9a:4a:87:72:a3
  726. [RcGetHdevByPhyMode]-- channel 0 fix for rdev fetching
  727. [BuildChannelList] BandIdx = 0, PhyMode = 49, ChListNum = 4:
  728. [RadarStateCheck] RD_NORMAL_MODE
  729. phy_freq_adjust : no prim_ch value for adjust!
  730. Caller: wlan_operate_init+0x150/0x164 [MT7613_ap]
  731.  
  732. phy_mode=49, ch=0, wdev_type=1
  733. ht_cap: ht_cap->HtCapInfo,
  734. ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=0,rx_stbc=0,amsdu_size=0
  735. ht_cap: ht_cap->HtCapParm,
  736. mdpu_density=5, ampdu_factor=3
  737. AP inf up for ra_0(func_idx) OmacIdx=0
  738. AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
  739. ApAutoChannelAtBootUp----------------->
  740. ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1
  741. AsicSetRxFilter(): NotSupportedFunc for this arch(HIF_MT)!
  742. MtCmdSetMacTxRx:(ret = 0)
  743. [AutoChSelBuildChannelListFor5G] ChListNum5G = 4
  744. AsicSwitchChannel(): 5G Channel:36, then must be Channel_Band:1 !!
  745. AsicSwitchChannel(): 5G Channel:40, then must be Channel_Band:1 !!
  746. AsicSwitchChannel(): 5G Channel:44, then must be Channel_Band:1 !!
  747. AsicSwitchChannel(): 5G Channel:48, then must be Channel_Band:1 !!
  748. ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 36, IsAband = 1
  749. AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 49, Channel = 36
  750. AsicSwitchChannel(): 5G Channel:42, then must be Channel_Band:1 !!
  751. ApAutoChannelAtBootUp<-----------------
  752. [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  753. Caller: SetCommonHT+0xf4/0x160 [MT7613_ap]
  754.  
  755. phy_mode=49, ch=36, wdev_type=1
  756. ht_cap: ht_cap->HtCapInfo,
  757. ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=0,rx_stbc=0,amsdu_size=0
  758. ht_cap: ht_cap->HtCapParm,
  759. mdpu_density=5, ampdu_factor=3
  760. wifi_sys_linkup(), wdev idx = 0
  761. wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:135 for WDEV_TYPE:1
  762. LinkToOmacIdx = 0, LinkToWdevType = 1
  763. bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
  764. UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
  765. MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0
  766. MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0
  767. MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0
  768. AsicSetTxStream(): NotSupportedFunc for this arch(HIF_MT)!
  769. AsicSetRxStream(): NotSupportedFunc for this arch(HIF_MT)!
  770. apidx 0 for WscUUIDInit
  771. Generate UUID for apidx(0)
  772. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "echo 1 > /proc/tplink/led_wlan_5G"
  773.  
  774. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "iwpriv rai0 set ed_chk=0"
  775.  
  776. [ util_execSystem ] 141: oal_wlan_ra_setStaNum cmd is "iwpriv rai0 set MaxStaNum=32"
  777.  
  778. [ util_execSystem ] 141: oal_wlan_ra_initWlan cmd is "iwpriv rai0 setset_thermal_protection_admin_ctrl_duty_proc: ucBand:0, u4Lv0Duty:100, u4Lv1Duty:80, u4Lv2Duty:40, u4Lv3Duty:20
  779. tpc_duty=100:080:040:020"
  780.  
  781. [ oal_wlan_ra_initWlan ] 2502: cmd: iwpriv rai0 set tpc_duty=100:080:040:020
  782. [ uset_thermal_protection_criteria_proc: fgHighEn: 1, fgLowEn: 1, fgRFOffEn: 0, cHighTempTh: 115, cLowTempTh: 108, cRFOffTh: 125
  783. til_execSystem ]set_thermal_protection_criteria_proc: u4RechkTimer: 30, ucType: Duty Cycle
  784. 141: oal_wlan_MtCmdThermalProtect: ucBand:0, HighEn:1, HighTempTh:115, LowEn:1, LowTempTh:108, RechkTimer:30
  785. ra_initWlan cmd MtCmdThermalProtect: RFOffEn: 0, RFOffTh: 125, ucType: 1
  786. is "iwpriv rai0 set tpc=1:1:0:115:108:125:0030:1"
  787.  
  788. [ oal_wlan_ra_initWlan ] 2505: cmd: iwprivdevice rai0 entered promiscuous mode
  789. rai0 set tpc=1:br0: port 8(rai0) entering forwarding state
  790. 1:0:115:108:125:br0: port 8(rai0) entering forwarding state
  791. 0030:1
  792. [ util_execSystem ] 141: oal_br_addIntfIntoBridge cmd is "brctl addif br0 rai0"
  793.  
  794. [ utdevice apclii0 entered promiscuous mode
  795. il_execSystem ] 141: oal_br_addIntfIntoBridge cmd is "brctl addif br0 apclii0"
  796.  
  797. [ util_execSydevice rai1 entered promiscuous mode
  798. stem ] 141: oaldevice rai1 left promiscuous mode
  799. _br_addIntfIntoBridge cmd is "brctl addif br0 raspiflash_ioctl_read, Read from 0x007f8000 length 0x2, ret 0, retlen 0x2
  800. i1"
  801.  
  802. brctl: bridge br0: Invalid argument
  803. wlNetlinkTool is already there.
  804. [ util_execSystem ] 141: oal_wlan_ra_initEnd cmd is "killall -q wscd_5G"
  805.  
  806. [ util_execSystem ] 141: oal_wlan_ra_initEnd cmd is "wscd_5G -i rai0 -m 1 -w /var/tmp/wsc_upnp_5G/ &"
  807.  
  808. [ util_execSystem ] 141: rsl_initLanWlanObj cmd is "echo 0 > /proc/tplink/wl_mode"
  809.  
  810. wscd: SSDP UDP PORT = 1900
  811. [ util_execSystem ] 141: oal_ipt_setWanPort cmd is "iptables -t filter -A INPUT -p tcp --dport 80 -j ACCEPT"
  812.  
  813. sendto: No such file or directory
  814. pid 750 send 2030 error
  815. sendto: No such file or directory
  816. pid 750 send 2004 error
  817. [ util_execSystem ] 141: oal_startDhcps cmd is "dhcpd /var/tmp/dconf/udhcpd.conf"
  818.  
  819. [ util_execSystem ] 141: oal_lan6_startDhcp6s cmd is "dhcp6s -c /var/tmp/dconf/dhcp6s_br0.conf -P /var/run/dhcp6s_br0.pid br0 &"
  820.  
  821. iptables: Bad rule (does a matching rule exist in that chain?).
  822. [ util_execSystem ] 141: oal_lan6_startRadvd cmd is "radvd -C /var/tmp/dconf/radvd_br0.conf -p /var/run/radvd_br0.pid &"
  823.  
  824. [ util_execSystem ] 141: oal_lan6_setIntfAddr cmd is "ifconfig br0 add 2003:fb:8f05:1df5:929a:4aff:fe87:72a4/64"
  825.  
  826. [ rsl_initEwanObj ] 298: Initialize EWAN, enable(1)!
  827. [ rsl_setEwanObj ] 208: Get Ethernet's stack!
  828. [ rsl_setEwanObj ] 262: enable ethernet interface now!
  829. [ oal_ewan_enable ] 469: pEwan->ifName(eth0.2)
  830. [ util_execSystem ] 141: oal_br_delIntfFromBridge cmd is "brctl delif br0 eth0.2"
  831.  
  832. brctl: bridge br0: Invalid argument
  833. [ rsl_setEwanObj ] 268: EWAN.ifname(eth0.2)!
  834. [ wan_conn_wanIpConn_getConnectionInfo ] 906: GET MAC(90:9A:4A:87:72:A5) successfully!
  835. [ util_execSystem ] 141: oal_intf_setIfMac cmd is "ifconfig eth0.2 down"
  836.  
  837. [ util_execSystem ] 141: oal_intf_setIfMac cmd is "ifconfig eth0.2 hw ether 90:9A:4A:87:72:A5 up"
  838.  
  839. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.2 up"
  840.  
  841. [ wan_conn_wanIpConn_getConnectionInfo ] 906: GET MAC(90:9A:4A:87:72:A5) successfully!
  842. [ util_execSystem ] 141: oal_intf_enableIntf cmd is "ifconfig eth0.2 up"
  843.  
  844. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 2 > /proc/sys/net/ipv6/conf/eth0.2/accept_ra"
  845.  
  846. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 0 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  847.  
  848. radvd starting
  849. [ util_execSystem ] 141: addressTypeToInt cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/sendrs "
  850.  
  851. [ util_execSystem ] 141: oal_wan6_enableSlaac cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  852.  
  853. [ rsl_initWanPppConnObj ] 398: into rsl_initWanPppConnObj!
  854. [ rsl_initWanPppConnObj ] 515: rsl_initWanPppConnObj successed!
  855. [ rsl_initWanPppConnObj ] 398: into rsl_initWanPppConnObj!
  856. [ rsl_initWanPppConnObj ] 515: rsl_initWanPppConnObj successed!
  857. [ rsl_initAppObj ] 1065: ==> start dhcp client
  858.  
  859. [ util_execSystem ] 141: oal_rip_updateConfig cmd is "rm -f /var/tmp/dconf/zebra.conf"
  860.  
  861. [ util_execSystem ] 141: oal_rip_updateConfig cmd is "rm -f /var/tmp/dconf/ripd.conf"
  862.  
  863. [ util_execSystem ] 141: removeAllRIPIpTableRule cmd is "iptables -L INPUT -v --line-numbers > /var/iptable"
  864.  
  865. [ getPidFromPidFile ] 112: Cann't open file: /var/run/zebra.pid.
  866. [ util_execSystem ] 141: controlRipProcess cmd is "zebra -d -f /var/tmp/dconf/zebra.conf"
  867.  
  868. [ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid.
  869. [ util_execSystem ] 141: oal_ipt_fwDdos cmd is "iptables -D FORWARD -j FIREWALL_DDOS
  870. "
  871.  
  872. iptables: No chain/target/match by that name.
  873. [ util_execSystem ] 141: oal_ipt_forbidLanPing cmd is "iptables -t filter -D INPUT -i br+ -p icmp --icmp-type echo-request -j DROP
  874. iptables -t filter -D FORWARD -i br+ -p icmp --icmp-type echo-request -j DROP
  875. "
  876.  
  877. iptables: Bad rule (does a matching rule exist in that chain?).
  878. iptables: Bad rule (does a matching rule exist in that chain?).
  879. [ util_execSystem ] 141: oal_ddos_delPingRule cmd is "iptables -t filter -D INPUT ! -i br+ -p icmp --icmp-type echo-request -j ACCEPT
  880. "
  881.  
  882. iptables: Bad rule (does a matching rule exist in that chain?).
  883. [ util_execSystem ] 141: oal_ipt_setDDoSRules cmd is "iptables -F FIREWALL_DDOS"
  884.  
  885. [ util_execSystem ] 141: ddos_clearAll cmd is "rm -f /var/tmp/dosHost"
  886.  
  887. sh: diagTool: not found
  888. [ util_execSystem ] 141: oal_initFirewallObj cmd is "ebtables -N FIREWALL"
  889.  
  890. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -F"
  891.  
  892. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -X"
  893.  
  894. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -P INPUT ACCEPT"
  895.  
  896. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -P FORWARD DROP"
  897.  
  898. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -P OUTPUT ACCEPT"
  899.  
  900. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -N FIREWALL"
  901.  
  902. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -N FWRULE"
  903.  
  904. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -N SETMSS"
  905.  
  906. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i lo -p ALL -j ACCEPT -m comment --comment "loop back""
  907.  
  908. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
  909.  
  910. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p tcp --dport 23 -j ACCEPT"
  911.  
  912. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p tcp --dport 23 -j DROP"
  913.  
  914. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p tcp --dport 22 -j ACCEPT"
  915.  
  916. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p tcp --dport 22 -j DROP"
  917.  
  918. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p icmpv6 --icmpv6-type echo-request -j ACCEPT"
  919.  
  920. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p icmpv6 --icmpv6-type echo-request -j DROP"
  921.  
  922. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -i br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
  923.  
  924. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -o br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
  925.  
  926. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -j FIREWALL"
  927.  
  928. [ util_execSystem ] 141: oal_initIp6FirewallObj cmd is "ip6tables -I FORWARD 1 -j SETMSS"
  929.  
  930. [ util_execSystem ] 141: oal_fw6_setFwEnabeld cmd is "ip6tables -D FIREWALL -j ACCEPT"
  931.  
  932. ip6tables: Bad rule (does a matching rule exist in that chain?).
  933. [ util_execSystem ] 141: oal_fw6_setFwEnabeld cmd is "ip6tables -F FIREWALL"
  934.  
  935. [ util_execSystem ] 141: oal_fw6_setFwEnabeld cmd is "ip6tables -A FIREWALL -j ACCEPT"
  936.  
  937. [ rsl_initWanL2tpConnObj ] 245: L2TP Connection(ewan_l2tp) is not enable.
  938.  
  939. [ rsl_initWanL2tpConnObj ] 245: L2TP Connection() is not enable.
  940.  
  941. [ rsl_initWanPptpConnObj ] 239: PPTP Connection(ewan_pptp) is not enable.
  942.  
  943. [ rsl_initWanPptpConnObj ] 239: PPTP Connection() is not enable.
  944.  
  945. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_ftp.ko"
  946.  
  947. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_ftp.ko"
  948.  
  949. [ util_execSystem ] 141: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 500 -j DROP"
  950.  
  951. iptables: Bad rule (does a matching rule exist in that chain?).
  952. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko"
  953.  
  954. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko"
  955.  
  956. [ util_execSystem ] 141: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p tcp --dport 1723 -j DROP"
  957.  
  958. iptables: Bad rule (does a matching rule exist in that chain?).
  959. [ util_execSystem ] 141: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 1701 -j DROP"
  960.  
  961. iptables: Bad rule (does a matching rule exist in that chain?).
  962. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko"
  963.  
  964. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_tftp.ko"
  965.  
  966. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko"
  967.  
  968. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko"
  969.  
  970. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko"
  971.  
  972. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_sip.ko"
  973.  
  974. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_rtsp.ko"
  975.  
  976. [ util_execSystem ] 141: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_rtsp.ko"
  977.  
  978. nf_nat_rtsp v0.6.21 loading
  979. [ util_execSystem ] 141: oal_openIpv6PassThrough cmd is "rmmod /lib/modules/ipv6_pass_through.ko"
  980.  
  981. rmmod: can't unload 'ipv6_pass_through': unknown symbol in module, or unknown parameter
  982. enable switch phyport...
  983. Set: phy[0].reg[0] = 3900
  984. Set: phy[1].reg[0] = 3900
  985. Set: phy[2].reg[0] = 3900
  986. Set: phy[3].reg[0] = 3900
  987. [cmd_dutInit():1094] init shm
  988. [tddp_taskEntry():151] tddp task start
  989. Set: phy[4].reg[0] = 3900
  990. Set: phy[0].reg[0] = 3300
  991. Set: phy[1].reg[0] = 3300
  992. Set: phy[2].reg[0] = 3300
  993. Set: phy[3].reg[0] = 3300
  994. Set: phy[4].reg[0] = 3300
  995. resetMiiPortV over.
  996. Set: phy[0].reg[4] = 01e1
  997. Set: phy[0].reg[0] = 3300
  998. Set: phy[1].reg[4] = 01e1
  999. Set: phy[1].reg[0] = 3300
  1000. Set: phy[2].reg[4] = 01e1
  1001. Set: phy[2].reg[0] = 3300
  1002. Set: phy[3].reg[4] = 01e1
  1003. Set: phy[3].reg[0] = 3300
  1004. Set: phy[4].reg[4] = 01e1
  1005. Set: phy[4].reg[0] = 3300
  1006. turn off flow control over.
  1007. start ntp_request
  1008. [ oal_sys_getOldTZInfo ] 592: Open TZ file error!
  1009. [ util_execSystem ] 141: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
  1010.  
  1011. [ util_execSystem ] 141: prepareDropbear cmd is "dropbearkey -t rsa -f /var/tmp/dropbear/dropbear_rsa_host_key"
  1012.  
  1013. Will output 1024 bit rsa secret key to '/var/tmp/dropbear/dropbear_rsa_host_key'
  1014. Generating key, this may take a while...
  1015. [ util_execSystem ] 141: prepareDropbear cmd is "dropbearkey -t dss -f /var/tmp/dropbear/dropbear_dss_host_key"
  1016.  
  1017. Will output 1024 bit dss secret key to '/var/tmp/dropbear/dropbear_dss_host_key'
  1018. Generating key, this may take a while...
  1019. [ util_execSystem ] 141: prepareDropbear cmd is "dropbear -p 22 -r /var/tmp/dropbear/dropbear_rsa_host_key -d /var/tmp/dropbear/dropbear_dss_host_key -A /var/tmp/dropbear/dropbearpwd"
  1020.  
  1021. [ rsl_setWanIpConnObj ] 663: Into wan_conn_wanIpConn_handleSetOpt!
  1022. [ util_execSystem ] 141: oal_igmp_setForceVersion cmd is "echo 0 > /proc/sys/net/ipv4/conf/eth0.2/force_igmp_version"
  1023.  
  1024. igmpd# file: src/igmp_ifinfo.c;line: 308; error = Cannot assign requested address
  1025. igmpd# Err: ioctl - SIOCGIFADDR
  1026. [ util_execSystem ] 141: oal_igmp_setForceVersion cmd is "for i in /sys/devices/virtual/net/*/bridge/igmp_query_version; do echo 3 > $i; done"
  1027.  
  1028. [ wan_conn_wanIpConn_handleSetOpt ] 542: Restart ipv6 connnection(ewan_ipoev6_d)!
  1029. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 2 > /proc/sys/net/ipv6/conf/eth0.2/accept_ra"
  1030.  
  1031. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 0 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  1032.  
  1033. [ util_execSystem ] 141: addressTypeToInt cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/sendrs "
  1034.  
  1035. [ util_execSystem ] 141: oal_wan6_enableSlaac cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  1036.  
  1037. [ util_execSystem ] 141: addressTypeToInt cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/sendrs "
  1038.  
  1039. [ ntp_start ] 504: ntp connect failed, return.
  1040.  
  1041. [ util_execSystem ] 141: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
  1042.  
  1043. [ util_execSystem ] 141: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
  1044.  
  1045. Get SNTP start config
  1046. start ntp_request
  1047. [ util_execSystem ] 141: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
  1048.  
  1049. [ rsl_setWanIpConnObj ] 663: Into wan_conn_wanIpConn_handleSetOpt!
  1050. [ util_execSystem ] 141: oal_igmp_setForceVersion cmd is "echo 0 > /proc/sys/net/ipv4/conf/eth0.2/force_igmp_version"
  1051.  
  1052. igmpd# file: src/igmp_ifinfo.c;line: 308; error = Cannot assign requested address
  1053. igmpd# Err: ioctl - SIOCGIFADDR
  1054. [ util_execSystem ] 141: oal_igmp_setForceVersion cmd is "for i in /sys/devices/virtual/net/*/bridge/igmp_query_version; do echo 3 > $i; done"
  1055.  
  1056. [ wan_conn_wanIpConn_handleSetOpt ] 542: Restart ipv6 connnection(ewan_ipoev6_d)!
  1057. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 2 > /proc/sys/net/ipv6/conf/eth0.2/accept_ra"
  1058.  
  1059. [ util_execSystem ] 141: oal_wan6_enableAcceptRa cmd is "echo 0 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  1060.  
  1061. [ util_execSystem ] 141: addressTypeToInt cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/sendrs "
  1062.  
  1063. [ util_execSystem ] 141: oal_wan6_enableSlaac cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/autoconf"
  1064.  
  1065. [ util_execSystem ] 141: addressTypeToInt cmd is "echo 1 > /proc/sys/net/ipv6/conf/eth0.2/sendrs "
  1066.  
Advertisement
RAW Paste Data Copied
Advertisement