SENDING:M501
echo:V23 stored settings retrieved (396 bytes)
echo:Steps per unit:
echo:  M92 X80.26 Y80.00 Z400.00 E100.00
echo:Maximum feedrates (mm/s):
echo:  M203 X300.00 Y300.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X2500 Y2500 Z200 E10000
echo:Accelerations: P=printing, R=retract and T=travel
echo:  M204 P1300.00 R2500.00 T2500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X5.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X5.00 Y0.00 Z0.00
Mesh bed leveling:
echo:  M420 S1 X3 Y3
echo:  M421 X10.00 Y10.00 Z4.10
echo:  M421 X150.00 Y10.00 Z4.15
echo:  M421 X290.00 Y10.00 Z4.25
echo:  M421 X10.00 Y150.00 Z4.00
echo:  M421 X150.00 Y150.00 Z4.13
echo:  M421 X290.00 Y150.00 Z4.20
echo:  M421 X10.00 Y290.00 Z4.00
echo:  M421 X150.00 Y290.00 Z4.18
echo:  M421 X290.00 Y290.00 Z4.30
echo:Material heatup parameters:
echo:  M145 S0 H180 B70 F0
echo:  M145 S1 H240 B110 F0
echo:PID settings:
echo:  M301 P24.80 I1.67 D92.03 C100.00 L20
echo:Filament settings: Disabled
echo:  M200 D3.00
echo:  M200 D0