Hit any key to stop autoboot:  0
sun7i#
sun7i# bootm 0x48000000
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.4.61-cb2tc+
   Created:      2013-09-13   9:03:35 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4009984 Bytes = 3.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
Using machid 0x10bb from environment

Starting kernel ...

it : 0xc0705000 - 0xc0738c80   ( 208 kB)
      .data : 0xc073a000 - 0xc079df68   ( 400 kB)
       .bss : 0xc079df8c - 0xc08dbca8   (1272 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:192
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x404e3e88 - 0x404e3ee0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3830.57 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
WRN:L287(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
WRN:L426(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
WRN:L480(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.240:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
msgmni has been set to 1289
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
sunxi disp driver loaded (/dev/disp api 1.0)
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[uart]: used uart info.: 0x01
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
[NAND] nand driver version: 0x2 0x9
Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
Dev Sunxi softw311 nand magic does not match for MBR 2:
Dev Sunxi softw311 nand magic does not match for MBR 3:
Dev Sunxi softw311 nand magic does not match for MBR 4:
Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
Dev Sunxi softw411 nand: part 1, start 32768, size 65536
Dev Sunxi softw411 nand: part 2, start 98304, size 32768
Dev Sunxi softw411 nand: part 3, start 131072, size 32768
Dev Sunxi softw411 nand: part 4, start 163840, size 4194304
Dev Sunxi softw411 nand: part 5, start 4358144, size 3620864
 nand: nand1 nand2 nand3 nand4 nand5
[NAND]nand driver, ok.
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
sunxi_emac Using mii phy on PortA
sunxi_emac Using MAC from FEX: 00:99:00:99:00:99
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
ata1: SATA link down (SStatus 0 SControl 300)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
===========================hv_keypad_init=====================
========HV Inital ===================
tkey_fetch_sysconfig_para: tkey_unused.
hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0
sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
config i2c gpio with gpio_config api
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[AXP]axp driver uning configuration failed(323)
[AXP]power_start = 0
i2c i2c-0: Invalid probe address 0x00
I2C: i2c-0: AW16XX I2C adapter
i2c i2c-1: Invalid probe address 0x00
I2C: i2c-1: AW16XX I2C adapter
i2c i2c-2: Invalid probe address 0x00
I2C: i2c-2: AW16XX I2C adapter
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
axp20_ldo3: 700 <--> 3500 mV at 2800 mV
axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
axp20_buck2: 700 <--> 2275 mV at 1400 mV
axp20_buck3: 700 <--> 3500 mV at 1250 mV
axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 Probe: base:0xf00da000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
[mmc-msg] sdc3 set round clock 400000, src 24000000
[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc3 Probe: base:0xf00dc000 irq:67 sg_cpu:ffddf000(4fc01000) ret 0.
[mmc_pm]: failed to fetch sdio card configuration!
sunxi_leds driver init
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF:	voltage = 1450mv 	frequency = 1008MHz
[cpu_freq] INF:	voltage = 1400mv 	frequency =  912MHz
[cpu_freq] INF:	voltage = 1300mv 	frequency =  864MHz
[cpu_freq] INF:	voltage = 1200mv 	frequency =  720MHz
[cpu_freq] INF:	voltage = 1100mv 	frequency =  528MHz
[cpu_freq] INF:	voltage = 1050mv 	frequency =  312MHz
[cpu_freq] INF:	voltage = 1050mv 	frequency =  144MHz
[cpu_freq] INF:	voltage = 1000mv 	frequency =    0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 384MHz
registered taskstats version 1
I2C: i2c-3: HDMI I2C adapter
ParseEDID
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
Using above mode as preferred EDID mode
PCLK=68250000 X 1280 1328 1360 1440 Y 768 771 778 790 fr 59 PN
Unimplemented SVD code 22
Unimplemented SVD code 17
Unimplemented SVD code 21
Unimplemented SVD code 16
Unimplemented SVD code 4
Unimplemented SVD code 2
Unimplemented SVD code 6
Unimplemented SVD code 33
Unimplemented SVD code 34
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 108100000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 72650000 pclk
disp_clk: Could not find a matching pll-freq for 83650000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
Parse_VideoData_Block: VIC 31 (native) support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 19 support
Parse_VideoData_Block: VIC 18 support
Parse_VideoData_Block: VIC 22 support
Parse_VideoData_Block: VIC 17 support
Parse_VideoData_Block: VIC 21 support
Parse_VideoData_Block: VIC 16 support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 7 support
Parse_VideoData_Block: VIC 2 support
Parse_VideoData_Block: VIC 6 support
Parse_VideoData_Block: VIC 1 support
Parse_VideoData_Block: VIC 32 support
Parse_VideoData_Block: VIC 33 support
Parse_VideoData_Block: VIC 34 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=84750000 X 1360 1432 1568 1776 Y 768 771 776 798 fr 59 PP
PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
Console: switching to colour frame buffer device 160x45
[mmc-msg] mmc 0 detect change, present 1
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
axp20_ldo4: incomplete constraints, leaving on
axp20_ldo3: incomplete constraints, leaving on
axp20_ldo2: incomplete constraints, leaving on
axp20_ldo1: incomplete constraints, leaving on
console [netcon0] enabled
netconsole: network logging started
sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
ALSA device list:
  #0: sunxi-CODEC  Audio Codec
  #1: sunxi-sndhdmi
Waiting for root device /dev/mmcblk0p2...
[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 power on
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-err] smc 0 err, cmd 52,  RTO
[mmc-err] smc 0 err, cmd 52,  RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-err] smc 0 err, cmd 5,  RTO
[mmc-err] smc 0 err, cmd 5,  RTO
[mmc-err] smc 0 err, cmd 5,  RTO
[mmc-err] smc 0 err, cmd 5,  RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set round clock 42857143, src 600000000
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 NCard 3.73 GiB
 mmcblk0: p1 p2
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 204K
systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP; other)

Welcome to Linux!

systemd[1]: No hostname configured.
systemd[1]: Set hostname to <localhost>.
         Expecting device dev-ttyS0.device...
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Starting Collect Read-Ahead Data...
[  OK  ] Listening on udev Kernel Socket.
systemd-readahead[68]: Failed to create fanotify object: Function not implemented
[  OK  ] Listening on udev Control Socket.
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[  OK  ] Reached target Swap.
         Expecting device dev-disk-by\x2duuid-6E09\x2dF5ED.device...
[  OK  ] Listening on Journal Socket.
         Mounting POSIX Message Queue File System...
         Starting udev Kernel Device Manager...
         Starting udev Coldplug all Devices...
         Starting Journal Service...
[  OK  ] Started Journal Service.
systemd-udevd[71]: starting version 187
[  OK  ] Started udev Kernel Device Manager.
systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
systemd-journald[74]: Fixed max_use=45.4M max_size=5.6M min_size=64.0K keep_free=22.7M
systemd-journald[74]: Reserving 10346 entries in hash table.
[  OK  ] Started Collect Read-Ahead Data.
systemd-journald[74]: Vacuuming...
[  OK  ] Mounted POSIX Message Queue File System.
         Starting Remount Root and Kernel File Systems...
         Starting Load Kernel Modules...
         Starting Setup Virtual Console...
         Starting Apply Kernel Variables...
[  OK  ] Started udev Coldplug all Devices.
[FAILED] Failed to start Load Kernel Modules.
         See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Apply Kernel Variables.
         Mounting Configuration File System...
         Mounting FUSE Control File System...
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Found device /dev/disk/by-uuid/6E09-F5ED.
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /boot...
         Mounting Temporary Directory...
         Starting Load Random Seed...
[  OK  ] Mounted Temporary Directory.
[  OK  ] Mounted /boot.
[  OK  ] Reached target Local File Systems.
         Starting Recreate Volatile Files and Directories...
         Starting Trigger Flushing of Journal to Persistent Storage...
[  OK  ] Started Load Random Seed.
[FAILED] Failed to start Recreate Volatile Files and Directories.
         See 'systemctl status systemd-tmpfiles-setup.service' for details.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Login Service...
         Starting D-Bus System Message Bus...
         Starting Telephony service...
         Starting Connection service...
         Starting Bluetooth service...
[  OK  ] Started D-Bus System Message Bus.
systemd-journald[74]: Received SIGUSR1
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
         Starting Serial Getty on ttyS0...
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Login Service.
[  OK  ] Started Connection service.
[  OK  ] Started Bluetooth service.
[  OK  ] Started Telephony service.
[  OK  ] Reached target Network.
[  OK  ] Reached target Multi-User.
[  OK  ] Reached target Graphical Interface.
sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Mer release 0.2011 (Mer)
Kernel 3.4.61-cb2tc+ on an armv7l

localhost login: