Public Pastes
daily pastebin goal
1%
SHARE
TWEET

Untitled

a guest Jan 1st, 2015 142 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@lemaker:/home/bananapi# dmesg
  2. [    0.000000] Booting Linux on physical CPU 0
  3. [    0.000000] Initializing cgroup subsys cpuset
  4. [    0.000000] Initializing cgroup subsys cpu
  5. [    0.000000] Linux version 3.4.90 (bananapi@lemaker) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP PREEMPT Tue Aug 5 14:11:40 CST 2014
  6. [    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  7. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [    0.000000] Machine: sun7i
  9. [    0.000000] Memory Reserved:
  10. [    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
  11. [    0.000000]  VE   : 0x44000000 - 0x48ffffff  (  80 MB)
  12. [    0.000000]  G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
  13. [    0.000000]  LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
  14. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  15. [    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  16. [    0.000000] On node 0 totalpages: 262144
  17. [    0.000000] free_area_init_node: node 0, pgdat c08ff780, node_mem_map d0000000
  18. [    0.000000]   DMA zone: 512 pages used for memmap
  19. [    0.000000]   DMA zone: 0 pages reserved
  20. [    0.000000]   DMA zone: 65024 pages, LIFO batch:15
  21. [    0.000000]   Normal zone: 1008 pages used for memmap
  22. [    0.000000]   Normal zone: 128016 pages, LIFO batch:31
  23. [    0.000000]   HighMem zone: 528 pages used for memmap
  24. [    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
  25. [    0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
  26. [    0.000000] pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096
  27. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
  29. [    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  30. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  31. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  32. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  33. [    0.000000] allocated 2097152 bytes of page_cgroup
  34. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  35. [    0.000000] Memory: 1024MB = 1024MB total
  36. [    0.000000] Memory: 895208k/895208k available, 153368k reserved, 270336K highmem
  37. [    0.000000] Virtual kernel memory layout:
  38. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  39. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  40. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  41. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  42. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  43. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  44. [    0.000000]       .text : 0xc0008000 - 0xc085c2b0   (8529 kB)
  45. [    0.000000]       .init : 0xc085d000 - 0xc0895dc0   ( 228 kB)
  46. [    0.000000]       .data : 0xc0896000 - 0xc0906de8   ( 452 kB)
  47. [    0.000000]        .bss : 0xc0906e0c - 0xc0ad6718   (1855 kB)
  48. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  49. [    0.000000] Preemptible hierarchical RCU implementation.
  50. [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
  51. [    0.000000]  Additional per-CPU info printed with stalls.
  52. [    0.000000] NR_IRQS:192
  53. [    0.000000] Architected local timer running at 24.00MHz.
  54. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  55. [    0.000000] start_kernel(): bug: interrupts were enabled early
  56. [    0.000000] Console: colour dummy device 80x30
  57. [    0.000000] console [tty0] enabled
  58. [    0.013710] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
  59. [    0.075993] pid_max: default: 32768 minimum: 301
  60. [    0.079669] Mount-cache hash table entries: 512
  61. [    0.083894] Initializing cgroup subsys cpuacct
  62. [    0.087233] Initializing cgroup subsys memory
  63. [    0.090667] Initializing cgroup subsys devices
  64. [    0.094114] Initializing cgroup subsys freezer
  65. [    0.097349] Initializing cgroup subsys blkio
  66. [    0.101032] Initializing cgroup subsys perf_event
  67. [    0.104619] CPU: Testing write buffer coherency: ok
  68. [    0.109804] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  69. [    0.116924] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  70. [    0.122476] Setting up static identity map for 0x405c3458 - 0x405c34b0
  71. [    0.238776] CPU1: Booted secondary processor
  72. [    0.297363] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  73. [    0.299360] Brought up 2 CPUs
  74. [    0.304700] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  75. [    0.307942] devtmpfs: initialized
  76. [    0.313249] dummy:
  77. [    0.316935] NET: Registered protocol family 16
  78. [    0.323148] DMA: preallocated 256 KiB pool for atomic coherent allocations
  79. [    0.330797] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  80. [    0.335683] hw-breakpoint: maximum watchpoint size is 8 bytes.
  81. [    0.338849] [ccu-inf] aw clock manager init
  82. [    0.341128] [ccu-inf] aw_ccu_init
  83. [    0.345092] [ccu-inf] script config pll3 to 297MHz
  84. [    0.348855] [ccu-inf] script config pll4 to 300MHz
  85. [    0.352612] [ccu-inf] script config pll6 to 600MHz
  86. [    0.356386] [ccu-inf] script config pll7 to 297MHz
  87. [    0.360143] [ccu-inf] script config pll8 to 336MHz
  88. [    0.362905] Init eGon pin module V2.0
  89. [    0.372090] bio: create slab <bio-0> at 0
  90. [    0.375535] sunxi_gpio driver init ver 1.3
  91. [    0.381832] gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
  92. [    0.384988] SCSI subsystem initialized
  93. [    0.387854] libata version 3.00 loaded.
  94. [    0.392490] usbcore: registered new interface driver usbfs
  95. [    0.396868] usbcore: registered new interface driver hub
  96. [    0.401070] usbcore: registered new device driver usb
  97. [    0.404243] Linux media interface: v0.10
  98. [    0.407889] Linux video capture interface: v2.00
  99. [    0.413647] Advanced Linux Sound Architecture Driver Version 1.0.25.
  100. [    0.418936] Switching to clocksource arch_sys_counter
  101. [    0.421042] FS-Cache: Loaded
  102. [    0.423218] CacheFiles: Loaded
  103. [    0.434356] cfg80211: Calling CRDA to update world regulatory domain
  104. [    0.443565] WRN:L287(/home/bananapi/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
  105. [    0.455416] WRN:L426(/home/bananapi/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
  106. [    0.467605] WRN:L480(/home/bananapi/bananapi/bananapi-bsp/linux-bananapi/drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
  107. [    0.473842] NET: Registered protocol family 2
  108. [    0.480200] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  109. [    0.487120] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  110. [    0.494538] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  111. [    0.501117] TCP: Hash tables configured (established 131072 bind 65536)
  112. [    0.503335] TCP: reno registered
  113. [    0.508220] UDP hash table entries: 512 (order: 2, 16384 bytes)
  114. [    0.513565] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  115. [    0.517206] NET: Registered protocol family 1
  116. [    0.522511] RPC: Registered named UNIX socket transport module.
  117. [    0.526237] RPC: Registered udp transport module.
  118. [    0.529906] RPC: Registered tcp transport module.
  119. [    0.535333] RPC: Registered tcp NFSv4.1 backchannel transport module.
  120. [    0.540793] audit: initializing netlink socket (disabled)
  121. [    0.544561] type=2000 audit(0.530:1): initialized
  122. [    0.548711] highmem bounce pool size: 64 pages
  123. [    0.559956] VFS: Disk quotas dquot_6.5.2
  124. [    0.565565] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  125. [    0.572474] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  126. [    0.577166] NFS: Registering the id_resolver key type
  127. [    0.581654] NTFS driver 2.1.30 [Flags: R/W].
  128. [    0.585171] fuse init (API version 7.18)
  129. [    0.588601] msgmni has been set to 1220
  130. [    0.599164] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  131. [    0.602498] alg: No test for stdrng (krng)
  132. [    0.609165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  133. [    0.612170] io scheduler noop registered
  134. [    0.616274] io scheduler deadline registered (default)
  135. [    0.619109] io scheduler cfq registered
  136. [    0.623914] sunxi disp driver loaded (/dev/disp api 1.0)
  137. [    0.629525] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
  138. [    0.637482] [uart]: used uart info.: 0x8d
  139. [    0.642202] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  140. [    0.668476] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  141. [    1.292186] console [ttyS0] enabled
  142. [    1.300544] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  143. [    1.332380] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  144. [    1.344209] [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  145. [    1.376044] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  146. [    1.387856] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
  147. [    1.419680] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
  148. [    1.429214] G2D: drv_g2d_init
  149. [    1.433949] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  150. [    1.442940] G2D: head:c9000000,tail:ca000000
  151. [    1.450548] G2D: Module initialized.major:250
  152. [    1.463531] brd: module loaded
  153. [    1.472268] loop: module loaded
  154. [    1.479242] gpio count < =0 ,gpio_count is: 0
  155. [    1.489571] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  156. [    1.500817] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  157. [    1.513578] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  158. [    1.528486] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  159. [    1.539245] scsi0 : sw_ahci_platform
  160. [    1.550037] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  161. [    1.561895] Fixed MDIO Bus: probed
  162. [    1.569965] eth%d: device MAC address 02:0f:07:01:a2:d8
  163. [    1.578190] gmac_para gpio count is 18
  164. [    1.583401] [gmac]: sun6i_gmac platform driver registration completed
  165. [    1.586696] PPP generic driver version 2.4.2
  166. [    1.594905] PPP BSD Compression module registered
  167. [    1.603641] PPP Deflate Compression module registered
  168. [    1.612091] NET: Registered protocol family 24
  169. [    1.622304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  170. [    1.634055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  171. [    1.642649] [sw-ehci1]: open clock
  172. [    1.665271] [sw-ehci1]: Set USB Power ON
  173. [    1.671708] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [    1.685428] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  175. [    1.696867] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  176. [    1.723374] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  177. [    1.731393] ehci_irq: port change detect
  178. [    1.737272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  179. [    1.750254] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  180. [    1.763920] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  181. [    1.775766] usb usb1: Manufacturer: Linux 3.4.90 ehci_hcd
  182. [    1.784308] usb usb1: SerialNumber: sw-ehci
  183. [    1.791680] hub 1-0:1.0: USB hub found
  184. [    1.798356] hub 1-0:1.0: 1 port detected
  185. [    1.804830] [sw-ohci1]: open clock
  186. [    1.830922] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  187. [    1.844276] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  188. [    1.855658] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  189. [    1.903383] ata1: SATA link down (SStatus 0 SControl 300)
  190. [    1.928820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  191. [    1.941810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  192. [    1.955129] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  193. [    1.966626] usb usb2: Manufacturer: Linux 3.4.90 ohci_hcd
  194. [    1.975170] usb usb2: SerialNumber: sw-ohci
  195. [    1.982539] hub 2-0:1.0: USB hub found
  196. [    1.989182] hub 2-0:1.0: 1 port detected
  197. [    1.995659] [sw-ehci2]: open clock
  198. [    2.001718] ehci_irq: port change detect
  199. [    2.020989] [sw-ehci2]: Set USB Power ON
  200. [    2.027435] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  201. [    2.041190] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  202. [    2.052637] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  203. [    2.061704] The port change to OHCI now!
  204. [    2.083377] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  205. [    2.091401] ehci_irq: port change detect
  206. [    2.097140] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  207. [    2.110086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  208. [    2.123726] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  209. [    2.135543] usb usb3: Manufacturer: Linux 3.4.90 ehci_hcd
  210. [    2.144062] usb usb3: SerialNumber: sw-ehci
  211. [    2.151415] hub 3-0:1.0: USB hub found
  212. [    2.158092] hub 3-0:1.0: 1 port detected
  213. [    2.164573] [sw-ohci2]: open clock
  214. [    2.190668] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  215. [    2.204032] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  216. [    2.215404] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  217. [    2.288817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  218. [    2.301802] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  219. [    2.315123] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  220. [    2.326617] usb usb4: Manufacturer: Linux 3.4.90 ohci_hcd
  221. [    2.335162] usb usb4: SerialNumber: sw-ohci
  222. [    2.342542] hub 4-0:1.0: USB hub found
  223. [    2.349186] hub 4-0:1.0: 1 port detected
  224. [    2.358262] mousedev: PS/2 mouse device common for all mice
  225. [    2.368950] input: sunxi-ir as /devices/virtual/input/input0
  226. [    2.376127] IR Initial OK
  227. [    2.381709] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  228. [    2.387018] usb 2-1: new low-speed USB device number 2 using sw-ohci
  229. [    2.401987] i2c /dev entries driver
  230. [    2.409246] config i2c gpio with gpio_config api
  231. [    2.414853] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  232. [    2.426006] axp_mfd 0-0034: AXP internal temperature monitoring enabled
  233. [    2.437783] [AXP]axp driver uning configuration failed(342)
  234. [    2.439708] [AXP]power_start = 0
  235. [    2.442796] I2C: i2c-0: AW16XX I2C adapter
  236. [    2.450277] config i2c gpio with gpio_config api
  237. [    2.453648] I2C: i2c-1: AW16XX I2C adapter
  238. [    2.461121] config i2c gpio with gpio_config api
  239. [    2.464483] I2C: i2c-2: AW16XX I2C adapter
  240. [    2.471955] config i2c gpio with gpio_config api
  241. [    2.475288] I2C: i2c-3: AW16XX I2C adapter
  242. [    2.481199] [ace_drv] start!!!
  243. [    2.483559] [ace_drv] init end!!!
  244. [    2.485224] [pa_drv] start!!!
  245. [    2.487422] [pa_drv] init end!!!
  246. [    2.491523] Driver for 1-wire Dallas network protocol.
  247. [    2.500892] invalid gpio pin in fex configuration : -1
  248. [    2.508433] axp20_ldo1: 1300 mV
  249. [    2.516855] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  250. [    2.527219] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  251. [    2.537340] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  252. [    2.547744] axp20_buck2: 700 <--> 2275 mV at 1450 mV
  253. [    2.557997] axp20_buck3: 700 <--> 3500 mV at 1300 mV
  254. [    2.567958] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  255. [    2.582756] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  256. [    2.602725] usb 2-1: New USB device found, idVendor=1113, idProduct=3163
  257. [    2.613860] axp20_ldo2: Failed to create debugfs directory
  258. [    2.622912] device-mapper: uevent: version 1.0.3
  259. [    2.633740] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  260. [    2.641127] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  261. [    2.659711] cpuidle: using governor ladder
  262. [    2.666670] cpuidle: using governor menu
  263. [    2.672847] [mmc-msg] sw_mci_init
  264. [    2.681795] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  265. [    2.693352] [mmc-msg] sdc0 set round clock 400000, src 24000000
  266. [    2.707247] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  267. [    2.723405] [mmc-msg] sdc0 Probe: base:0xf0154000 irq:64 sg_cpu:f0156000(4fc00000) ret 0.
  268. [    2.736092] [mmc_pm]: failed to fetch sdio card configuration!
  269. [    2.739449] usb 2-1: Product: MEDION MD 86996
  270. [    2.741804] sunxi_leds driver init
  271. [    2.753273] Registered led device: green:ph24:led1
  272. [    2.758320] ledtrig-cpu: registered to indicate activity on CPUs
  273. [    2.779637] input: MEDION MD 86996 as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input2
  274. [    2.799042] generic-usb 0003:1113:3163.0001: input,hidraw0: USB HID v1.00 Keyboard [MEDION MD 86996] on usb-sw-ohci-1/input0
  275. [    2.827216] input: MEDION MD 86996 as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.1/input/input3
  276. [    2.847262] generic-usb 0003:1113:3163.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MEDION MD 86996] on usb-sw-ohci-1/input1
  277. [    2.863636] usbcore: registered new interface driver usbhid
  278. [    2.872023] usbhid: USB HID core driver
  279. [    2.878483] ashmem: initialized
  280. [    2.887109] usb 3-1: new high-speed USB device number 2 using sw-ehci
  281. [    2.890593] logger: created 256K log 'log_main'
  282. [    2.905202] logger: created 256K log 'log_events'
  283. [    2.913471] logger: created 256K log 'log_radio'
  284. [    2.921721] logger: created 256K log 'log_system'
  285. [    2.929549] IPv4 over IPv4 tunneling driver
  286. [    2.935818] TCP: bic registered
  287. [    2.941210] TCP: cubic registered
  288. [    2.947038] TCP: westwood registered
  289. [    2.953208] TCP: highspeed registered
  290. [    2.959123] TCP: hybla registered
  291. [    2.964605] TCP: htcp registered
  292. [    2.970079] TCP: vegas registered
  293. [    2.975561] TCP: veno registered
  294. [    2.981296] TCP: scalable registered
  295. [    2.986865] TCP: lp registered
  296. [    2.992080] TCP: yeah registered
  297. [    2.997821] TCP: illinois registered
  298. [    3.004596] Initializing XFRM netlink socket
  299. [    3.012255] NET: Registered protocol family 10
  300. [    3.020090] NET: Registered protocol family 17
  301. [    3.027917] NET: Registered protocol family 15
  302. [    3.036954] [mmc_pm]: No sdio card, please check your config !!
  303. [    3.040647] Registering the dns_resolver key type
  304. [    3.047413] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  305. [    3.063694] Registering SWP/SWPB emulation handler
  306. [    3.073095] axp20_buck2: Failed to create debugfs directory
  307. [    3.084854] [cpu_freq] INF:-------------------V-F Table-------------------
  308. [    3.096790] [cpu_freq] INF:  voltage = 1450mv        frequency = 1008MHz
  309. [    3.107946] [cpu_freq] INF:  voltage = 1425mv        frequency =  912MHz
  310. [    3.119094] [cpu_freq] INF:  voltage = 1350mv        frequency =  864MHz
  311. [    3.130240] [cpu_freq] INF:  voltage = 1250mv        frequency =  720MHz
  312. [    3.141390] [cpu_freq] INF:  voltage = 1150mv        frequency =  528MHz
  313. [    3.152535] [cpu_freq] INF:  voltage = 1100mv        frequency =  312MHz
  314. [    3.163680] [cpu_freq] INF:  voltage = 1050mv        frequency =  144MHz
  315. [    3.174854] [cpu_freq] INF:  voltage = 1000mv        frequency =    0MHz
  316. [    3.186786] [cpu_freq] INF:-----------------------------------------------
  317. [    3.203408] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
  318. [    3.217996] registered taskstats version 1
  319. [    3.226681] I2C: i2c-4: HDMI I2C adapter
  320. [    3.243700] usb 3-1: New USB device found, idVendor=177f, idProduct=0323
  321. [    3.256529] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  322. [    3.266824] usb 3-1: Product: 802.11 n WLAN
  323. [    3.273900] usb 3-1: Manufacturer: Sweex
  324. [    3.280523] usb 3-1: SerialNumber: 1.0
  325. [    3.281751] ParseEDID
  326. [    3.295980] EDID version: 1.3
  327. [    3.305220] PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
  328. [    3.316381] Using above mode as preferred EDID mode
  329. [    3.337854] Unimplemented SVD code 2
  330. [    3.344067] Unimplemented SVD code 22
  331. [    3.350343] Unimplemented SVD code 31
  332. [    3.356632] Unimplemented SVD code 21
  333. [    3.362916] Unimplemented SVD code 17
  334. [    3.369104] Unimplemented SVD code 6
  335. [    3.378543] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  336. [    3.391343] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  337. [    3.404140] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  338. [    3.416850] disp_clk: Could not find a matching pll-freq for 25150000 pclk
  339. [    3.429560] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  340. [    3.442357] disp_clk: Could not find a matching pll-freq for 193250000 pclk
  341. [    3.455156] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  342. [    3.467868] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  343. [    3.479198] Parse_VideoData_Block: VIC 16 (native) support
  344. [    3.488264] Parse_VideoData_Block: VIC 5 support
  345. [    3.496459] Parse_VideoData_Block: VIC 4 support
  346. [    3.504654] Parse_VideoData_Block: VIC 3 support
  347. [    3.512849] Parse_VideoData_Block: VIC 2 support
  348. [    3.521033] Parse_VideoData_Block: VIC 7 support
  349. [    3.529314] Parse_VideoData_Block: VIC 22 support
  350. [    3.537602] Parse_VideoData_Block: VIC 1 support
  351. [    3.545886] Parse_VideoData_Block: VIC 31 support
  352. [    3.554254] Parse_VideoData_Block: VIC 18 support
  353. [    3.562611] Parse_VideoData_Block: VIC 19 support
  354. [    3.570978] Parse_VideoData_Block: VIC 20 support
  355. [    3.579345] Parse_VideoData_Block: VIC 32 support
  356. [    3.587712] Parse_VideoData_Block: VIC 21 support
  357. [    3.596080] Parse_VideoData_Block: VIC 17 support
  358. [    3.604361] Parse_VideoData_Block: VIC 6 support
  359. [    3.612546] Parse_AudioData_Block: max channel=2
  360. [    3.621086] Parse_AudioData_Block: SampleRate code=7
  361. [    3.634974] [mmc-msg] mmc 0 detect change, present 1
  362. [    3.643609] Parse_AudioData_Block: WordLen code=7
  363. [    3.651793] Find HDMI Vendor Specific DataBlock
  364. [    3.662594] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  365. [    3.675742] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  366. [    3.688453] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  367. [    3.700818] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  368. [    3.712804] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  369. [    3.722094] waited 0 ms for EDID info
  370. [    3.732301] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  371. [    4.146944] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  372. [    4.158377] [mmc-msg] sdc0 power on
  373. [    4.187363] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  374. [    4.201666] [mmc-msg] sdc0 set round clock 400000, src 24000000
  375. [    4.284661] [mmc-err] smc 0 err, cmd 52,  RTO
  376. [    4.293166] [mmc-err] smc 0 err, cmd 52,  RTO
  377. [    4.305876] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  378. [    4.326014] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  379. [    4.340787] [mmc-err] smc 0 err, cmd 5,  RTO
  380. [    4.349119] [mmc-err] smc 0 err, cmd 5,  RTO
  381. [    4.357448] [mmc-err] smc 0 err, cmd 5,  RTO
  382. [    4.365772] [mmc-err] smc 0 err, cmd 5,  RTO
  383. [    4.379037] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  384. [    4.396789] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  385. [    4.416919] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  386. [    4.470006] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  387. [    4.487934] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  388. [    4.502595] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  389. [    4.572296] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  390. [    4.586349] mmc0: new high speed SDHC card at address 59b4
  391. [    4.595746] mmcblk0: mmc0:59b4 SD    30.1 GiB
  392. [    4.603367]  mmcblk0: p1 p2
  393. [    5.007480] Console: switching to colour frame buffer device 240x75
  394. [    5.012080] ParseEDID
  395. [    5.033007] EDID version: 1.3
  396. [    5.039280] PCLK=154000000 X 1920 1968 2000 2080 Y 1200 1203 1209 1235 fr 59 PN
  397. [    5.070951] axp20_buck3: incomplete constraints, leaving on
  398. [    5.081453] axp20_buck2: incomplete constraints, leaving on
  399. [    5.083986] Unimplemented SVD code 2
  400. [    5.086627] Unimplemented SVD code 22
  401. [    5.089246] Unimplemented SVD code 31
  402. [    5.091885] Unimplemented SVD code 21
  403. [    5.094507] Unimplemented SVD code 17
  404. [    5.097052] Unimplemented SVD code 6
  405. [    5.101488] axp20_ldo4: incomplete constraints, leaving on
  406. [    5.107313] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  407. [    5.113251] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  408. [    5.119098] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  409. [    5.124950] disp_clk: Could not find a matching pll-freq for 25150000 pclk
  410. [    5.130782] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  411. [    5.136725] disp_clk: Could not find a matching pll-freq for 193250000 pclk
  412. [    5.141162] axp20_ldo3: incomplete constraints, leaving on
  413. [    5.146986] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  414. [    5.151562] axp20_ldo2: incomplete constraints, leaving on
  415. [    5.156250] axp20_ldo1: incomplete constraints, leaving on
  416. [    5.162074] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  417. [    5.168666] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  418. [    5.175359] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  419. [    5.339930] Parse_VideoData_Block: VIC 16 (native) support
  420. [    5.348979] Parse_VideoData_Block: VIC 5 support
  421. [    5.357146] Parse_VideoData_Block: VIC 4 support
  422. [    5.365321] Parse_VideoData_Block: VIC 3 support
  423. [    5.373498] Parse_VideoData_Block: VIC 2 support
  424. [    5.381672] Parse_VideoData_Block: VIC 7 support
  425. [    5.389937] Parse_VideoData_Block: VIC 22 support
  426. [    5.398197] Parse_VideoData_Block: VIC 1 support
  427. [    5.406449] Parse_VideoData_Block: VIC 31 support
  428. [    5.414798] Parse_VideoData_Block: VIC 18 support
  429. [    5.423155] Parse_VideoData_Block: VIC 19 support
  430. [    5.431504] Parse_VideoData_Block: VIC 20 support
  431. [    5.439853] Parse_VideoData_Block: VIC 32 support
  432. [    5.448201] Parse_VideoData_Block: VIC 21 support
  433. [    5.456539] Parse_VideoData_Block: VIC 17 support
  434. [    5.470090] Parse_VideoData_Block: VIC 6 support
  435. [    5.473673] Parse_AudioData_Block: max channel=2
  436. [    5.482200] Parse_AudioData_Block: SampleRate code=7
  437. [    5.485880] Parse_AudioData_Block: WordLen code=7
  438. [    5.493972] Find HDMI Vendor Specific DataBlock
  439. [    5.500254] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  440. [    5.511046] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  441. [    5.516889] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  442. [    5.527069] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  443. [    5.590969] console [netcon0] enabled
  444. [    5.604719] netconsole: network logging started
  445. [    5.620027] otg_wakelock_init: No USB transceiver found
  446. [    5.639291] sunxi-rtc sunxi-rtc: setting system clock to 2015-01-01 21:00:12 UTC (1420146012)
  447. [    5.656502] ALSA device list:
  448. [    5.669118]   #0: sunxi-CODEC  Audio Codec
  449. [    5.681928]   #1: sunxi-sndhdmi
  450. [    5.697761] md: Waiting for all devices to be available before autodetect
  451. [    5.716101] md: If you don't use raid, use raid=noautodetect
  452. [    5.732517] md: Autodetecting RAID arrays.
  453. [    5.746834] md: Scanned 0 and added 0 devices.
  454. [    5.759776] md: autorun ...
  455. [    5.771518] md: ... autorun DONE.
  456. [    5.804943] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  457. [    5.824796] VFS: Mounted root (ext4 filesystem) on device 179:2.
  458. [    5.841590] devtmpfs: mounted
  459. [    5.854091] Freeing init memory: 224K
  460. [    6.485083] init: plymouth-upstart-bridge main process (60) terminated with status 1
  461. [    6.505369] init: plymouth-upstart-bridge main process ended, respawning
  462. [    6.572467] init: plymouth-upstart-bridge main process (70) terminated with status 1
  463. [    6.592854] init: plymouth-upstart-bridge main process ended, respawning
  464. [    6.632158] init: plymouth-upstart-bridge main process (73) terminated with status 1
  465. [    6.652393] init: plymouth-upstart-bridge main process ended, respawning
  466. [    6.719984] init: plymouth-upstart-bridge main process (75) terminated with status 1
  467. [    6.744160] init: plymouth-upstart-bridge main process ended, respawning
  468. [    6.765705] init: ureadahead main process (63) terminated with status 5
  469. [    8.542678] systemd-udevd[217]: starting version 204
  470. [    9.050824] UMP<2>: Inserting UMP device driver. Compiled: Aug  5 2014, time: 14:01:32
  471. [    9.078662] UMP<2>: Using OS memory backend, allocation limit: 134217728
  472. [    9.083924] UMP: UMP device driver  loaded
  473. [    9.134940] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
  474. [    9.160380] mali: use config clk_div 1
  475. [    9.166293] mali: clk_div 1
  476. [    9.166882] Mali: mali clock set completed, clock is  312000000 Hz
  477. [    9.216802] mali: use config clk_div 1
  478. [    9.219633] mali: clk_div 1
  479. [    9.220260] Mali: mali clock set completed, clock is  312000000 Hz
  480. [    9.233817] Mali: Mali device driver loaded
  481. [    9.299516] [drm] Initialized drm 1.1.0 20060810
  482. [    9.317106] Mali DRM initialize, driver name: mali_drm, version 2.1
  483. [    9.327323] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  484. [    9.361048] Mali DRM initialize, driver name: mali_drm, version 2.1
  485. [    9.368704] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  486. [   10.185691] Bluetooth: Core ver 2.16
  487. [   10.194329] NET: Registered protocol family 31
  488. [   10.208659] Bluetooth: HCI device and connection manager initialized
  489. [   10.243050] Bluetooth: HCI socket layer initialized
  490. [   10.256104] Bluetooth: L2CAP socket layer initialized
  491. [   10.266466] Bluetooth: SCO socket layer initialized
  492. [   10.341062] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  493. [   10.354543] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  494. [   10.358725] Bluetooth: BNEP filters: protocol multicast
  495. [   10.531114] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  496. [   10.654746] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  497. [   10.929607] Bluetooth: RFCOMM TTY layer initialized
  498. [   10.933846] Bluetooth: RFCOMM socket layer initialized
  499. [   10.936652] Bluetooth: RFCOMM ver 1.11
  500. [   11.371915] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  501. [   15.720353] GMAC gpio_power_hd:gpio_direction_output
  502. [   16.118091] eth0: device MAC address 02:0f:07:01:a2:d8
  503. [   16.173124] sunxi_gmac: probed
  504. [   16.178538] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
  505. [   16.183352] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
  506. [   17.112215] disp clks: lcd 154000000 pre_scale 1 hdmi 154000000 pll 231000000 2x 1
  507. [   17.790467] init: plymouth-upstart-bridge main process ended, respawning
  508. [   22.212803] PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
  509. [   27.182903] eth0: no IPv6 routers present
  510. [  141.052083] init: plymouth-stop pre-start process (1503) terminated with status 1
  511. root@lemaker:/home/bananapi#
RAW Paste Data
Top