Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- == START OF INFORMATION SECTION ===
- Device Model: CT500MX500SSD1
- Serial Number:
- LU WWN Device Id: 5 00a075 1e1d2c336
- Firmware Version: M3CR022
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jun 19 20:37:17 2019 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 30) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x0031) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1106
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 173 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 21
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 19
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 43
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0022 064 049 000 Old_age Always - 36 (Min/Max 0/51)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
- 202 Unknown_SSD_Attribute 0x0030 099 099 001 Old_age Offline - 1
- 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
- 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4047647926
- 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 71955418
- 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 152845362
- SMART Error Log Version: 1
- Warning: ATA error count 0 inconsistent with error log pointer 2
- ATA Error Count: 0
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error -1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 00 ec 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
- ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
- ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
- ec 00 00 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE
- c8 00 00 00 00 00 00 00 00:00:00.000 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 1106 -
- # 2 Extended offline Completed without error 00% 1086 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement