Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@pcmlich ~# smartctl /dev/sdb
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.8-300.fc28.x86_64] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- ATA device successfully opened
- Use 'smartctl -a' (or '-x') to print SMART (and more) information
- [root@pcmlich ~# smartctl -x /dev/sdb
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.8-300.fc28.x86_64] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital RE3 Serial ATA
- Device Model: WDC WD5002ABYS-01B1B0
- Serial Number: WD-WCASY1160438
- LU WWN Device Id: 5 0014ee 257037498
- Firmware Version: 02.03B02
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.5, 3.0 Gb/s
- Local Time is: Mon May 21 15:00:28 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM level is: 254 (maximum performance), recommended: 128
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (10560) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 124) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 159 159 021 - 5008
- 4 Start_Stop_Count -O--CK 100 100 000 - 121
- 5 Reallocated_Sector_Ct PO--CK 197 197 140 - 24
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 036 036 000 - 46829
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 118
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 67
- 193 Load_Cycle_Count -O--CK 200 200 000 - 119
- 194 Temperature_Celsius -O---K 101 096 000 - 46
- 196 Reallocated_Event_Count -O--CK 196 196 000 - 4
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 35 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 35 [10] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 01 00 01 c3 00 d1 a1 40 00 Error: IDNF at LBA = 0x1c300d1a1 = 7566578081
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 01 00 00 00 00 01 d1 c3 a1 40 08 20d+20:20:49.749 WRITE FPDMA QUEUED
- 61 02 60 00 00 00 00 38 b6 7c df 40 08 20d+20:20:49.747 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 38 66 7e e7 40 08 20d+20:20:49.747 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 36 94 e3 d7 40 08 20d+20:20:49.747 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 35 3c 3a 97 40 08 20d+20:20:49.747 WRITE FPDMA QUEUED
- Error 34 [9] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 ff ff 00 16 86 00 21 97 40 00 Error: WP at LBA = 0x1686002197 = 96737436055
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 20 00 10 00 00 1d 1c 9f 5f 40 08 20d+20:20:40.627 WRITE FPDMA QUEUED
- 61 00 20 00 10 00 00 1d 1c 9f 3f 40 08 20d+20:20:40.527 WRITE FPDMA QUEUED
- 60 00 60 00 08 00 00 16 21 86 a7 40 08 20d+20:20:39.605 READ FPDMA QUEUED
- 60 00 08 00 00 00 00 16 21 86 97 40 08 20d+20:20:39.605 READ FPDMA QUEUED
- 61 00 08 00 00 00 00 36 94 f2 a7 40 08 20d+20:20:38.810 WRITE FPDMA QUEUED
- Error 33 [8] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 ff ff 00 01 c3 00 d1 a1 40 00 Error: IDNF at LBA = 0x1c300d1a1 = 7566578081
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 01 00 00 00 00 01 d1 c3 a1 40 08 20d+20:19:39.941 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 2f 4d ca 47 40 08 20d+20:19:39.941 WRITE FPDMA QUEUED
- 61 00 01 00 00 00 00 2f 4d b5 00 40 08 20d+20:19:39.940 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 2e 01 6b 17 40 08 20d+20:19:39.940 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 29 d8 cd 0f 40 08 20d+20:19:39.940 WRITE FPDMA QUEUED
- Error 32 [7] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 01 c3 00 d1 a1 40 00 Error: IDNF at LBA = 0x1c300d1a1 = 7566578081
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 01 00 00 00 00 01 d1 c3 a1 40 08 20d+20:19:32.335 WRITE FPDMA QUEUED
- 61 00 10 00 00 00 00 26 34 eb 27 40 08 20d+20:19:32.334 WRITE FPDMA QUEUED
- 61 02 20 00 00 00 00 26 81 df 6f 40 08 20d+20:19:32.333 WRITE FPDMA QUEUED
- 61 00 20 00 08 00 00 1d 1c 74 df 40 08 20d+20:19:32.333 WRITE FPDMA QUEUED
- 61 00 10 00 00 00 00 26 81 df 5f 40 08 20d+20:19:32.333 WRITE FPDMA QUEUED
- Error 31 [6] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 ff fd 00 29 d5 00 d8 1f 40 00 Error: WP at LBA = 0x29d500d81f = 179667261471
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 20 00 00 00 00 1d 1c b5 9f 40 08 20d+20:16:35.660 WRITE FPDMA QUEUED
- 60 00 20 00 30 00 00 29 d8 d4 1f 40 08 20d+20:16:31.090 READ FPDMA QUEUED
- 60 00 40 00 28 00 00 29 d8 d4 3f 40 08 20d+20:16:31.090 READ FPDMA QUEUED
- 60 00 40 00 20 00 00 29 d8 d5 1f 40 08 20d+20:16:31.090 READ FPDMA QUEUED
- 61 00 10 00 18 00 00 00 00 16 ef 40 08 20d+20:16:31.090 WRITE FPDMA QUEUED
- Error 30 [5] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 ff ff 00 29 d4 00 d8 1f 40 00 Error: WP at LBA = 0x29d400d81f = 179650484255
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 10 00 18 00 00 00 00 16 ef 40 08 20d+20:16:30.580 WRITE FPDMA QUEUED
- 61 00 20 00 18 00 00 1d 1c b5 7f 40 08 20d+20:16:24.077 WRITE FPDMA QUEUED
- 60 00 40 00 10 00 00 29 d8 d5 1f 40 08 20d+20:16:24.073 READ FPDMA QUEUED
- 60 00 40 00 08 00 00 29 d8 d4 3f 40 08 20d+20:16:24.051 READ FPDMA QUEUED
- 60 00 20 00 00 00 00 29 d8 d4 1f 40 08 20d+20:16:24.051 READ FPDMA QUEUED
- Error 29 [4] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 01 00 01 c3 00 d1 a0 40 00 Error: IDNF at LBA = 0x1c300d1a0 = 7566578080
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 02 00 00 00 00 01 d1 c3 a0 40 08 20d+20:16:14.576 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 00 00 56 d7 40 08 20d+20:16:14.575 WRITE FPDMA QUEUED
- 61 00 01 00 00 00 00 38 66 7e e0 40 08 20d+20:16:14.575 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 35 3c 3a 97 40 08 20d+20:16:14.575 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 34 c3 4b df 40 08 20d+20:16:14.575 WRITE FPDMA QUEUED
- Error 28 [3] occurred at disk power-on lifetime: 10049 hours (418 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 ff fe 00 29 d0 00 d8 47 40 00 Error: WP at LBA = 0x29d000d847 = 179583375431
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 20 00 10 00 00 1d 1c 96 9f 40 08 20d+20:15:35.303 WRITE FPDMA QUEUED
- 60 00 08 00 08 00 00 29 d8 d0 47 40 08 20d+20:15:35.303 READ FPDMA QUEUED
- 61 00 08 00 00 00 00 1d 1c 21 47 40 08 20d+20:15:35.303 WRITE FPDMA QUEUED
- 61 00 20 00 00 00 00 1d 1c 96 7f 40 08 20d+20:15:34.523 WRITE FPDMA QUEUED
- 61 02 20 00 00 00 00 2f 96 db 3f 40 08 20d+20:15:34.513 WRITE FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 16555 -
- # 2 Short offline Completed without error 00% 16531 -
- # 3 Short offline Completed without error 00% 16507 -
- # 4 Extended offline Completed without error 00% 16463 -
- # 5 Short offline Completed without error 00% 16460 -
- # 6 Short offline Completed without error 00% 16436 -
- # 7 Short offline Completed without error 00% 16413 -
- # 8 Short offline Completed without error 00% 16389 -
- # 9 Short offline Completed without error 00% 16365 -
- #10 Short offline Completed without error 00% 16341 -
- #11 Short offline Completed without error 00% 16317 -
- #12 Extended offline Completed without error 00% 16296 -
- #13 Short offline Completed without error 00% 16293 -
- #14 Short offline Completed without error 00% 16269 -
- #15 Short offline Completed without error 00% 16245 -
- #16 Short offline Completed without error 00% 16222 -
- #17 Short offline Completed without error 00% 16198 -
- #18 Short offline Completed without error 00% 16174 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 46 Celsius
- Power Cycle Min/Max Temperature: 34/47 Celsius
- Lifetime Min/Max Temperature: 46/51 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (204)
- Index Estimated Time Temperature Celsius
- 205 2018-05-21 07:03 45 **************************
- ... ..( 16 skipped). .. **************************
- 222 2018-05-21 07:20 45 **************************
- 223 2018-05-21 07:21 46 ***************************
- ... ..( 11 skipped). .. ***************************
- 235 2018-05-21 07:33 46 ***************************
- 236 2018-05-21 07:34 47 ****************************
- ... ..( 2 skipped). .. ****************************
- 239 2018-05-21 07:37 47 ****************************
- 240 2018-05-21 07:38 46 ***************************
- ... ..( 18 skipped). .. ***************************
- 259 2018-05-21 07:57 46 ***************************
- 260 2018-05-21 07:58 41 **********************
- ... ..( 74 skipped). .. **********************
- 335 2018-05-21 09:13 41 **********************
- 336 2018-05-21 09:14 42 ***********************
- ... ..( 49 skipped). .. ***********************
- 386 2018-05-21 10:04 42 ***********************
- 387 2018-05-21 10:05 43 ************************
- ... ..( 53 skipped). .. ************************
- 441 2018-05-21 10:59 43 ************************
- 442 2018-05-21 11:00 44 *************************
- ... ..( 82 skipped). .. *************************
- 47 2018-05-21 12:23 44 *************************
- 48 2018-05-21 12:24 45 **************************
- ... ..(155 skipped). .. **************************
- 204 2018-05-21 15:00 45 **************************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 18 R_ERR response for data FIS
- 0x0003 2 18 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
- 0x8000 4 19001591 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement