Ledger Nano X - The secure hardware wallet
SHARE
TWEET

dmesg output

ccross59 Jun 21st, 2012 42 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 3.0.0-21-generic-pae (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #35-Ubuntu SMP Fri May 25 18:17:24 UTC 2012 (Ubuntu 3.0.0-21.35-generic-pae 3.0.32)
  4. [    0.000000] KERNEL supported cpus:
  5. [    0.000000]   Intel GenuineIntel
  6. [    0.000000]   AMD AuthenticAMD
  7. [    0.000000]   NSC Geode by NSC
  8. [    0.000000]   Cyrix CyrixInstead
  9. [    0.000000]   Centaur CentaurHauls
  10. [    0.000000]   Transmeta GenuineTMx86
  11. [    0.000000]   Transmeta TransmetaCPU
  12. [    0.000000]   UMC UMC UMC UMC
  13. [    0.000000] BIOS-provided physical RAM map:
  14. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
  15. [    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  17. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000ace3f000 (usable)
  18. [    0.000000]  BIOS-e820: 00000000ace3f000 - 00000000acebf000 (reserved)
  19. [    0.000000]  BIOS-e820: 00000000acebf000 - 00000000acfbf000 (ACPI NVS)
  20. [    0.000000]  BIOS-e820: 00000000acfbf000 - 00000000acfff000 (ACPI data)
  21. [    0.000000]  BIOS-e820: 00000000acfff000 - 00000000ad000000 (usable)
  22. [    0.000000]  BIOS-e820: 00000000ad000000 - 00000000afa00000 (reserved)
  23. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  24. [    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
  25. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  26. [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
  27. [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
  28. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  29. [    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
  30. [    0.000000]  BIOS-e820: 0000000100000000 - 00000001cfe00000 (usable)
  31. [    0.000000] NX (Execute Disable) protection: active
  32. [    0.000000] DMI 2.7 present.
  33. [    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/1658, BIOS F.13 04/25/2011
  34. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  35. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  36. [    0.000000] last_pfn = 0x1cfe00 max_arch_pfn = 0x1000000
  37. [    0.000000] MTRR default type: uncachable
  38. [    0.000000] MTRR fixed ranges enabled:
  39. [    0.000000]   00000-9FFFF write-back
  40. [    0.000000]   A0000-BFFFF uncachable
  41. [    0.000000]   C0000-FFFFF write-protect
  42. [    0.000000] MTRR variable ranges enabled:
  43. [    0.000000]   0 base 000000000 mask F80000000 write-back
  44. [    0.000000]   1 base 080000000 mask FC0000000 write-back
  45. [    0.000000]   2 base 0AD000000 mask FFF000000 uncachable
  46. [    0.000000]   3 base 0AE000000 mask FFE000000 uncachable
  47. [    0.000000]   4 base 0B0000000 mask FF0000000 uncachable
  48. [    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
  49. [    0.000000]   6 base 100000000 mask F80000000 write-back
  50. [    0.000000]   7 base 180000000 mask FC0000000 write-back
  51. [    0.000000]   8 base 1C0000000 mask FF0000000 write-back
  52. [    0.000000]   9 base 1CFE00000 mask FFFE00000 uncachable
  53. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  54. [    0.000000] found SMP MP-table at [c00fe1b0] fe1b0
  55. [    0.000000] initial memory mapped : 0 - 02000000
  56. [    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
  57. [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
  58. [    0.000000]  0000000000 - 0000200000 page 4k
  59. [    0.000000]  0000200000 - 0037a00000 page 2M
  60. [    0.000000]  0037a00000 - 0037bfe000 page 4k
  61. [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
  62. [    0.000000] RAMDISK: 365f0000 - 372f0000
  63. [    0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
  64. [    0.000000] ACPI: XSDT acffe120 0008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
  65. [    0.000000] ACPI: FACP acffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
  66. [    0.000000] ACPI: DSDT acfec000 0C553 (v01 HP     INSYDE   00000000 MSFT 01000013)
  67. [    0.000000] ACPI: FACS acf6c000 00040
  68. [    0.000000] ACPI: ASF! acffd000 000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
  69. [    0.000000] ACPI: HPET acffb000 00038 (v01 HP     INSYDE   00000001 MSFT 01000013)
  70. [    0.000000] ACPI: APIC acffa000 0008C (v02 HP     INSYDE   00000001 MSFT 01000013)
  71. [    0.000000] ACPI: MCFG acff9000 0003C (v01 HP     INSYDE   00000001 MSFT 01000013)
  72. [    0.000000] ACPI: SLIC acfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
  73. [    0.000000] ACPI: SSDT acfea000 0051F (v01 HP     INSYDE   00001000 MSFT 01000013)
  74. [    0.000000] ACPI: BOOT acfe8000 00028 (v01 HP     INSYDE   00000001 MSFT 01000013)
  75. [    0.000000] ACPI: ASPT acfe5000 00034 (v07 HP     INSYDE   00000001 MSFT 01000013)
  76. [    0.000000] ACPI: SSDT acfe4000 0090C (v01 HP     INSYDE   00003000 INTL 20100806)
  77. [    0.000000] ACPI: SSDT acfe3000 00996 (v01 HP     INSYDE   00003000 INTL 20100806)
  78. [    0.000000] ACPI: SSDT acfe2000 002DA (v01 HP     INSYDE   00003000 INTL 20100806)
  79. [    0.000000] ACPI: SSDT acfe1000 0035D (v01 HP     INSYDE   00003000 INTL 20100806)
  80. [    0.000000] ACPI: Local APIC address 0xfee00000
  81. [    0.000000] 6530MB HIGHMEM available.
  82. [    0.000000] 891MB LOWMEM available.
  83. [    0.000000]   mapped low ram: 0 - 37bfe000
  84. [    0.000000]   low ram: 0 - 37bfe000
  85. [    0.000000] Zone PFN ranges:
  86. [    0.000000]   DMA      0x00000010 -> 0x00001000
  87. [    0.000000]   Normal   0x00001000 -> 0x00037bfe
  88. [    0.000000]   HighMem  0x00037bfe -> 0x001cfe00
  89. [    0.000000] Movable zone start PFN for each node
  90. [    0.000000] early_node_map[4] active PFN ranges
  91. [    0.000000]     0: 0x00000010 -> 0x0000009d
  92. [    0.000000]     0: 0x00000100 -> 0x000ace3f
  93. [    0.000000]     0: 0x000acfff -> 0x000ad000
  94. [    0.000000]     0: 0x00100000 -> 0x001cfe00
  95. [    0.000000] On node 0 totalpages: 1559501
  96. [    0.000000] free_area_init_node: node 0, pgdat c17f8500, node_mem_map f2bf0200
  97. [    0.000000]   DMA zone: 32 pages used for memmap
  98. [    0.000000]   DMA zone: 0 pages reserved
  99. [    0.000000]   DMA zone: 3949 pages, LIFO batch:0
  100. [    0.000000]   Normal zone: 1752 pages used for memmap
  101. [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
  102. [    0.000000]   HighMem zone: 13061 pages used for memmap
  103. [    0.000000]   HighMem zone: 1318205 pages, LIFO batch:31
  104. [    0.000000] Using APIC driver default
  105. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  106. [    0.000000] ACPI: Local APIC address 0xfee00000
  107. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  108. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  109. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  110. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  111. [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
  112. [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
  113. [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
  114. [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
  115. [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
  116. [    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
  117. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  118. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  119. [    0.000000] ACPI: IRQ0 used by override.
  120. [    0.000000] ACPI: IRQ2 used by override.
  121. [    0.000000] ACPI: IRQ9 used by override.
  122. [    0.000000] Using ACPI (MADT) for SMP configuration information
  123. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  124. [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
  125. [    0.000000] nr_irqs_gsi: 40
  126. [    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
  127. [    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
  128. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  129. [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  130. [    0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
  131. [    0.000000] Booting paravirtualized kernel on bare hardware
  132. [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  133. [    0.000000] PERCPU: Embedded 13 pages/cpu @f7b83000 s29952 r0 d23296 u53248
  134. [    0.000000] pcpu-alloc: s29952 r0 d23296 u53248 alloc=13*4096
  135. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  136. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1544656
  137. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-21-generic-pae root=UUID=e052bc9f-649e-4a20-8e2f-108670f0e286 ro quiet splash vt.handoff=7
  138. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  139. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  140. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  141. [    0.000000] Initializing CPU#0
  142. [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
  143. [    0.000000] allocated 30400256 bytes of page_cgroup
  144. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  145. [    0.000000] Initializing HighMem for node 0 (00037bfe:001cfe00)
  146. [    0.000000] Memory: 6124420k/7600128k available (5534k kernel code, 113584k reserved, 2671k data, 724k init, 5325064k highmem)
  147. [    0.000000] virtual kernel memory layout:
  148. [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
  149. [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
  150. [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
  151. [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
  152. [    0.000000]       .init : 0xc1804000 - 0xc18b9000   ( 724 kB)
  153. [    0.000000]       .data : 0xc15678a4 - 0xc1803880   (2671 kB)
  154. [    0.000000]       .text : 0xc1000000 - 0xc15678a4   (5534 kB)
  155. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  156. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  157. [    0.000000] Hierarchical RCU implementation.
  158. [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
  159. [    0.000000] NR_IRQS:2304 nr_irqs:744 16
  160. [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
  161. [    0.000000] Extended CMOS year: 2000
  162. [    0.000000] vt handoff: transparent VT on vt#7
  163. [    0.000000] Console: colour dummy device 80x25
  164. [    0.000000] console [tty0] enabled
  165. [    0.000000] hpet clockevent registered
  166. [    0.000000] Fast TSC calibration using PIT
  167. [    0.004000] Detected 2095.381 MHz processor.
  168. [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.76 BogoMIPS (lpj=8381524)
  169. [    0.000006] pid_max: default: 32768 minimum: 301
  170. [    0.000027] Security Framework initialized
  171. [    0.000039] AppArmor: AppArmor initialized
  172. [    0.000041] Yama: becoming mindful.
  173. [    0.000086] Mount-cache hash table entries: 512
  174. [    0.000194] Initializing cgroup subsys cpuacct
  175. [    0.000200] Initializing cgroup subsys memory
  176. [    0.000207] Initializing cgroup subsys devices
  177. [    0.000209] Initializing cgroup subsys freezer
  178. [    0.000211] Initializing cgroup subsys net_cls
  179. [    0.000213] Initializing cgroup subsys blkio
  180. [    0.000218] Initializing cgroup subsys perf_event
  181. [    0.000245] CPU: Physical Processor ID: 0
  182. [    0.000247] CPU: Processor Core ID: 0
  183. [    0.000251] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  184. [    0.000252] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  185. [    0.000256] mce: CPU supports 7 MCE banks
  186. [    0.000265] CPU0: Thermal monitoring handled by SMI
  187. [    0.000271] using mwait in idle threads.
  188. [    0.002609] ACPI: Core revision 20110413
  189. [    0.023357] ftrace: allocating 25705 entries in 51 pages
  190. [    0.033790] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  191. [    0.034215] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  192. [    0.073843] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
  193. [    0.180096] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
  194. [    0.180102] ... version:                3
  195. [    0.180104] ... bit width:              48
  196. [    0.180105] ... generic registers:      4
  197. [    0.180106] ... value mask:             0000ffffffffffff
  198. [    0.180108] ... max period:             000000007fffffff
  199. [    0.180109] ... fixed-purpose events:   3
  200. [    0.180111] ... event mask:             000000070000000f
  201. [    0.180469] CPU 1 irqstacks, hard=f74d6000 soft=f74e0000
  202. [    0.180471] Booting Node   0, Processors  #1
  203. [    0.180473] smpboot cpu 1: start_ip = 99000
  204. [    0.190759] Initializing CPU#1
  205. [    0.267987] CPU1: Thermal monitoring handled by SMI
  206. [    0.288144] CPU 2 irqstacks, hard=f74ea000 soft=f74ec000
  207. [    0.288146]  #2
  208. [    0.288147] smpboot cpu 2: start_ip = 99000
  209. [    0.298416] Initializing CPU#2
  210. [    0.375823] CPU2: Thermal monitoring handled by SMI
  211. [    0.395983] CPU 3 irqstacks, hard=f7516000 soft=f7518000
  212. [    0.395985]  #3
  213. [    0.395986] smpboot cpu 3: start_ip = 99000
  214. [    0.406254] Initializing CPU#3
  215. [    0.483660] CPU3: Thermal monitoring handled by SMI
  216. [    0.503758] Brought up 4 CPUs
  217. [    0.503761] Total of 4 processors activated (16762.11 BogoMIPS).
  218. [    0.506597] devtmpfs: initialized
  219. [    0.506731] PM: Registering ACPI NVS region at acebf000 (1048576 bytes)
  220. [    0.508571] print_constraints: dummy:
  221. [    0.508599] Time:  7:37:55  Date: 06/21/12
  222. [    0.508634] NET: Registered protocol family 16
  223. [    0.508727] Trying to unpack rootfs image as initramfs...
  224. [    0.508735] EISA bus registered
  225. [    0.508751] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  226. [    0.508753] ACPI: bus type pci registered
  227. [    0.508815] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  228. [    0.508819] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  229. [    0.508821] PCI: Using MMCONFIG for extended config space
  230. [    0.508822] PCI: Using configuration type 1 for base access
  231. [    0.509636] bio: create slab <bio-0> at 0
  232. [    0.511698] ACPI: EC: Look up EC in DSDT
  233. [    0.513597] ACPI: Executed 1 blocks of module-level executable AML code
  234. [    0.547735] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  235. [    0.548154] ACPI: SSDT ace70798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
  236. [    0.548667] ACPI: Dynamic OEM Table Load:
  237. [    0.548669] ACPI: SSDT   (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100806)
  238. [    0.579928] ACPI: SSDT ace71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
  239. [    0.580480] ACPI: Dynamic OEM Table Load:
  240. [    0.580483] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100806)
  241. [    0.611719] ACPI: SSDT ace6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
  242. [    0.612228] ACPI: Dynamic OEM Table Load:
  243. [    0.612230] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100806)
  244. [    0.646675] ACPI: Interpreter enabled
  245. [    0.646684] ACPI: (supports S0 S3 S4 S5)
  246. [    0.646709] ACPI: Using IOAPIC for interrupt routing
  247. [    0.655317] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  248. [    0.655726] ACPI: ACPI Dock Station Driver: 1 docks/bays found
  249. [    0.655729] HEST: Table not found.
  250. [    0.655734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  251. [    0.656072] \_SB_.PCI0:_OSC invalid UUID
  252. [    0.656073] _OSC request data:1 8 1f
  253. [    0.656078] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  254. [    0.656651] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
  255. [    0.656654] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
  256. [    0.656656] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  257. [    0.656660] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
  258. [    0.656672] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
  259. [    0.656715] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
  260. [    0.656753] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  261. [    0.656756] pci 0000:00:01.0: PME# disabled
  262. [    0.656778] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
  263. [    0.656790] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
  264. [    0.656798] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
  265. [    0.656803] pci 0000:00:02.0: reg 20: [io  0x6000-0x603f]
  266. [    0.656866] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
  267. [    0.656892] pci 0000:00:16.0: reg 10: [mem 0xc8504000-0xc850400f 64bit]
  268. [    0.656975] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  269. [    0.656980] pci 0000:00:16.0: PME# disabled
  270. [    0.657019] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
  271. [    0.657359] pci 0000:00:1a.0: reg 10: [mem 0xc850a000-0xc850a3ff]
  272. [    0.659286] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  273. [    0.659291] pci 0000:00:1a.0: PME# disabled
  274. [    0.659318] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
  275. [    0.659336] pci 0000:00:1b.0: reg 10: [mem 0xc8500000-0xc8503fff 64bit]
  276. [    0.659417] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  277. [    0.659422] pci 0000:00:1b.0: PME# disabled
  278. [    0.659444] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
  279. [    0.659535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  280. [    0.659540] pci 0000:00:1c.0: PME# disabled
  281. [    0.659565] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
  282. [    0.659653] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  283. [    0.659658] pci 0000:00:1c.1: PME# disabled
  284. [    0.659683] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
  285. [    0.659771] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  286. [    0.659775] pci 0000:00:1c.2: PME# disabled
  287. [    0.659800] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
  288. [    0.659888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  289. [    0.659892] pci 0000:00:1c.3: PME# disabled
  290. [    0.659929] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
  291. [    0.660257] pci 0000:00:1d.0: reg 10: [mem 0xc8509000-0xc85093ff]
  292. [    0.662175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  293. [    0.662180] pci 0000:00:1d.0: PME# disabled
  294. [    0.662207] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
  295. [    0.662344] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
  296. [    0.662366] pci 0000:00:1f.2: reg 10: [io  0x6098-0x609f]
  297. [    0.662375] pci 0000:00:1f.2: reg 14: [io  0x60bc-0x60bf]
  298. [    0.662384] pci 0000:00:1f.2: reg 18: [io  0x6090-0x6097]
  299. [    0.662394] pci 0000:00:1f.2: reg 1c: [io  0x60b8-0x60bb]
  300. [    0.662403] pci 0000:00:1f.2: reg 20: [io  0x6060-0x607f]
  301. [    0.662412] pci 0000:00:1f.2: reg 24: [mem 0xc8508000-0xc85087ff]
  302. [    0.662463] pci 0000:00:1f.2: PME# supported from D3hot
  303. [    0.662468] pci 0000:00:1f.2: PME# disabled
  304. [    0.662487] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
  305. [    0.662505] pci 0000:00:1f.3: reg 10: [mem 0xc8506000-0xc85060ff 64bit]
  306. [    0.662528] pci 0000:00:1f.3: reg 20: [io  0x6040-0x605f]
  307. [    0.662586] pci 0000:00:01.0: PCI bridge to [bus 01-06]
  308. [    0.662589] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
  309. [    0.662592] pci 0000:00:01.0:   bridge window [mem 0xc7500000-0xc84fffff]
  310. [    0.662597] pci 0000:00:01.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
  311. [    0.662667] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
  312. [    0.662689] pci 0000:07:00.0: reg 10: [io  0x4000-0x40ff]
  313. [    0.662726] pci 0000:07:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
  314. [    0.662749] pci 0000:07:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
  315. [    0.662847] pci 0000:07:00.0: supports D1 D2
  316. [    0.662849] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  317. [    0.662855] pci 0000:07:00.0: PME# disabled
  318. [    0.667385] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
  319. [    0.667390] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
  320. [    0.667395] pci 0000:00:1c.0:   bridge window [mem 0xc6500000-0xc74fffff]
  321. [    0.667402] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
  322. [    0.667652] pci 0000:0d:00.0: [8086:0084] type 0 class 0x000280
  323. [    0.667837] pci 0000:0d:00.0: reg 10: [mem 0xc5500000-0xc5501fff 64bit]
  324. [    0.668606] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
  325. [    0.668641] pci 0000:0d:00.0: PME# disabled
  326. [    0.675426] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
  327. [    0.675432] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
  328. [    0.675437] pci 0000:00:1c.1:   bridge window [mem 0xc5500000-0xc64fffff]
  329. [    0.675444] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
  330. [    0.675520] pci 0000:13:00.0: [10ec:5209] type 0 class 0x00ff00
  331. [    0.675545] pci 0000:13:00.0: reg 10: [mem 0xc4500000-0xc4500fff]
  332. [    0.675632] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
  333. [    0.675707] pci 0000:13:00.0: supports D1 D2
  334. [    0.675709] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
  335. [    0.675716] pci 0000:13:00.0: PME# disabled
  336. [    0.683362] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
  337. [    0.683368] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
  338. [    0.683373] pci 0000:00:1c.2:   bridge window [mem 0xc4500000-0xc54fffff]
  339. [    0.683380] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
  340. [    0.683530] pci 0000:19:00.0: [1033:0194] type 0 class 0x000c03
  341. [    0.683588] pci 0000:19:00.0: reg 10: [mem 0xc4400000-0xc4401fff 64bit]
  342. [    0.683881] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
  343. [    0.683892] pci 0000:19:00.0: PME# disabled
  344. [    0.691404] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
  345. [    0.691410] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
  346. [    0.691415] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc44fffff]
  347. [    0.691423] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  348. [    0.691450] pci_bus 0000:00: on NUMA node 0
  349. [    0.691455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  350. [    0.691681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  351. [    0.691722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  352. [    0.691763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  353. [    0.691802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
  354. [    0.691859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
  355. [    0.691949] \_SB_.PCI0:_OSC invalid UUID
  356. [    0.691951] _OSC request data:1 1f 1f
  357. [    0.691955]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  358. [    0.691989] \_SB_.PCI0:_OSC invalid UUID
  359. [    0.691991] _OSC request data:1 0 1d
  360. [    0.691994]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
  361. [    0.691996] ACPI _OSC control for PCIe not granted, disabling ASPM
  362. [    0.695890] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
  363. [    0.695942] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
  364. [    0.695991] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
  365. [    0.696039] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  366. [    0.696087] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  367. [    0.696136] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
  368. [    0.696183] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  369. [    0.696231] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  370. [    0.696322] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  371. [    0.696331] vgaarb: loaded
  372. [    0.696332] vgaarb: bridge control possible 0000:00:02.0
  373. [    0.696507] SCSI subsystem initialized
  374. [    0.696558] libata version 3.00 loaded.
  375. [    0.696595] usbcore: registered new interface driver usbfs
  376. [    0.696605] usbcore: registered new interface driver hub
  377. [    0.696632] usbcore: registered new device driver usb
  378. [    0.696713] PCI: Using ACPI for IRQ routing
  379. [    0.705199] PCI: pci_cache_line_size set to 64 bytes
  380. [    0.705386] reserve RAM buffer: 000000000009d800 - 000000000009ffff
  381. [    0.705389] reserve RAM buffer: 00000000ace3f000 - 00000000afffffff
  382. [    0.705392] reserve RAM buffer: 00000000ad000000 - 00000000afffffff
  383. [    0.705394] reserve RAM buffer: 00000001cfe00000 - 00000001cfffffff
  384. [    0.705482] NetLabel: Initializing
  385. [    0.705484] NetLabel:  domain hash size = 128
  386. [    0.705485] NetLabel:  protocols = UNLABELED CIPSOv4
  387. [    0.705494] NetLabel:  unlabeled traffic allowed by default
  388. [    0.705534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  389. [    0.705540] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  390. [    0.708559] Switching to clocksource hpet
  391. [    0.711309] Switched to NOHz mode on CPU #0
  392. [    0.711452] Switched to NOHz mode on CPU #1
  393. [    0.711459] Switched to NOHz mode on CPU #2
  394. [    0.711461] Switched to NOHz mode on CPU #3
  395. [    0.714626] AppArmor: AppArmor Filesystem Enabled
  396. [    0.714647] pnp: PnP ACPI init
  397. [    0.714660] ACPI: bus type pnp registered
  398. [    0.714982] pnp 00:00: [bus 00-fe]
  399. [    0.714985] pnp 00:00: [io  0x0000-0x0cf7 window]
  400. [    0.714987] pnp 00:00: [io  0x0cf8-0x0cff]
  401. [    0.714989] pnp 00:00: [io  0x0d00-0xffff window]
  402. [    0.714991] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  403. [    0.714993] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
  404. [    0.714995] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
  405. [    0.714997] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
  406. [    0.714999] pnp 00:00: [mem 0x000cc000-0x000cffff window]
  407. [    0.715001] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
  408. [    0.715003] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
  409. [    0.715005] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
  410. [    0.715007] pnp 00:00: [mem 0x000dc000-0x000dffff window]
  411. [    0.715009] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
  412. [    0.715011] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
  413. [    0.715013] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
  414. [    0.715015] pnp 00:00: [mem 0x000ec000-0x000effff window]
  415. [    0.715017] pnp 00:00: [mem 0x000f0000-0x000fffff window]
  416. [    0.715020] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
  417. [    0.715083] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  418. [    0.715107] pnp 00:01: [io  0x0000-0x001f]
  419. [    0.715108] pnp 00:01: [io  0x0081-0x0091]
  420. [    0.715110] pnp 00:01: [io  0x0093-0x009f]
  421. [    0.715112] pnp 00:01: [io  0x00c0-0x00df]
  422. [    0.715114] pnp 00:01: [dma 4]
  423. [    0.715135] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  424. [    0.715143] pnp 00:02: [mem 0xff000000-0xffffffff]
  425. [    0.715163] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  426. [    0.715234] pnp 00:03: [mem 0xfed00000-0xfed003ff]
  427. [    0.715256] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  428. [    0.715267] pnp 00:04: [io  0x00f0]
  429. [    0.715276] pnp 00:04: [irq 13]
  430. [    0.715299] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  431. [    0.715310] pnp 00:05: [io  0x002e-0x002f]
  432. [    0.715312] pnp 00:05: [io  0x004e-0x004f]
  433. [    0.715313] pnp 00:05: [io  0x0061]
  434. [    0.715315] pnp 00:05: [io  0x0063]
  435. [    0.715317] pnp 00:05: [io  0x0065]
  436. [    0.715318] pnp 00:05: [io  0x0067]
  437. [    0.715320] pnp 00:05: [io  0x0070]
  438. [    0.715321] pnp 00:05: [io  0x0080]
  439. [    0.715323] pnp 00:05: [io  0x0092]
  440. [    0.715325] pnp 00:05: [io  0x00b2-0x00b3]
  441. [    0.715327] pnp 00:05: [io  0x0680-0x069f]
  442. [    0.715328] pnp 00:05: [io  0x1000-0x100f]
  443. [    0.715330] pnp 00:05: [io  0x1010-0x1013]
  444. [    0.715332] pnp 00:05: [io  0xffff]
  445. [    0.715334] pnp 00:05: [io  0x0400-0x0453]
  446. [    0.715335] pnp 00:05: [io  0x0458-0x047f]
  447. [    0.715337] pnp 00:05: [io  0x0500-0x057f]
  448. [    0.715339] pnp 00:05: [io  0x164e-0x164f]
  449. [    0.715385] system 00:05: [io  0x0680-0x069f] has been reserved
  450. [    0.715387] system 00:05: [io  0x1000-0x100f] has been reserved
  451. [    0.715390] system 00:05: [io  0x1010-0x1013] has been reserved
  452. [    0.715392] system 00:05: [io  0xffff] has been reserved
  453. [    0.715394] system 00:05: [io  0x0400-0x0453] has been reserved
  454. [    0.715397] system 00:05: [io  0x0458-0x047f] has been reserved
  455. [    0.715399] system 00:05: [io  0x0500-0x057f] has been reserved
  456. [    0.715401] system 00:05: [io  0x164e-0x164f] has been reserved
  457. [    0.715404] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  458. [    0.715412] pnp 00:06: [io  0x0070-0x0077]
  459. [    0.715418] pnp 00:06: [irq 8]
  460. [    0.715439] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  461. [    0.715459] pnp 00:07: [io  0x0454-0x0457]
  462. [    0.715493] system 00:07: [io  0x0454-0x0457] has been reserved
  463. [    0.715496] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  464. [    0.715526] pnp 00:08: [io  0x0060]
  465. [    0.715528] pnp 00:08: [io  0x0064]
  466. [    0.715533] pnp 00:08: [irq 1]
  467. [    0.715557] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
  468. [    0.715589] pnp 00:09: [irq 12]
  469. [    0.715613] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
  470. [    0.715716] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
  471. [    0.715718] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
  472. [    0.715720] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
  473. [    0.715722] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
  474. [    0.715724] pnp 00:0a: [mem 0xe0000000-0xefffffff]
  475. [    0.715726] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
  476. [    0.715728] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
  477. [    0.715729] pnp 00:0a: [mem 0xff000000-0xffffffff]
  478. [    0.715731] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
  479. [    0.715733] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
  480. [    0.715776] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
  481. [    0.715778] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
  482. [    0.715781] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
  483. [    0.715783] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
  484. [    0.715786] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  485. [    0.715788] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
  486. [    0.715790] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
  487. [    0.715793] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
  488. [    0.715796] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
  489. [    0.715798] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
  490. [    0.715801] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  491. [    0.716756] pnp 00:0b: [irq 23]
  492. [    0.716801] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
  493. [    0.716821] pnp 00:0c: [mem 0x20000000-0x201fffff]
  494. [    0.716823] pnp 00:0c: [mem 0x40000000-0x401fffff]
  495. [    0.716882] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
  496. [    0.716884] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
  497. [    0.716887] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
  498. [    0.716905] pnp: PnP ACPI: found 13 devices
  499. [    0.716907] ACPI: ACPI bus type pnp unregistered
  500. [    0.716910] PnPBIOS: Disabled by ACPI PNP
  501. [    0.752584] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
  502. [    0.752589] PCI: max bus depth: 1 pci_try_num: 2
  503. [    0.752632] pci 0000:00:01.0: PCI bridge to [bus 01-06]
  504. [    0.752635] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
  505. [    0.752638] pci 0000:00:01.0:   bridge window [mem 0xc7500000-0xc84fffff]
  506. [    0.752642] pci 0000:00:01.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
  507. [    0.752646] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
  508. [    0.752650] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
  509. [    0.752655] pci 0000:00:1c.0:   bridge window [mem 0xc6500000-0xc74fffff]
  510. [    0.752660] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
  511. [    0.752668] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
  512. [    0.752671] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
  513. [    0.752677] pci 0000:00:1c.1:   bridge window [mem 0xc5500000-0xc64fffff]
  514. [    0.752682] pci 0000:00:1c.1:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
  515. [    0.752692] pci 0000:13:00.0: BAR 6: assigned [mem 0xc3400000-0xc340ffff pref]
  516. [    0.752695] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
  517. [    0.752698] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
  518. [    0.752705] pci 0000:00:1c.2:   bridge window [mem 0xc4500000-0xc54fffff]
  519. [    0.752710] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
  520. [    0.752717] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
  521. [    0.752719] pci 0000:00:1c.3:   bridge window [io  disabled]
  522. [    0.752725] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc44fffff]
  523. [    0.752729] pci 0000:00:1c.3:   bridge window [mem pref disabled]
  524. [    0.752750] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  525. [    0.752753] pci 0000:00:01.0: setting latency timer to 64
  526. [    0.752764] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  527. [    0.752769] pci 0000:00:1c.0: setting latency timer to 64
  528. [    0.752777] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  529. [    0.752781] pci 0000:00:1c.1: setting latency timer to 64
  530. [    0.752792] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  531. [    0.752797] pci 0000:00:1c.2: setting latency timer to 64
  532. [    0.752808] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  533. [    0.752812] pci 0000:00:1c.3: setting latency timer to 64
  534. [    0.752817] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  535. [    0.752819] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  536. [    0.752822] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  537. [    0.752824] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
  538. [    0.752826] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
  539. [    0.752828] pci_bus 0000:01: resource 1 [mem 0xc7500000-0xc84fffff]
  540. [    0.752830] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
  541. [    0.752833] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
  542. [    0.752835] pci_bus 0000:07: resource 1 [mem 0xc6500000-0xc74fffff]
  543. [    0.752837] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
  544. [    0.752839] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
  545. [    0.752841] pci_bus 0000:0d: resource 1 [mem 0xc5500000-0xc64fffff]
  546. [    0.752843] pci_bus 0000:0d: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
  547. [    0.752846] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
  548. [    0.752848] pci_bus 0000:13: resource 1 [mem 0xc4500000-0xc54fffff]
  549. [    0.752850] pci_bus 0000:13: resource 2 [mem 0xc3400000-0xc43fffff 64bit pref]
  550. [    0.752852] pci_bus 0000:19: resource 1 [mem 0xc4400000-0xc44fffff]
  551. [    0.752884] NET: Registered protocol family 2
  552. [    0.752939] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  553. [    0.753085] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  554. [    0.753319] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  555. [    0.753419] TCP: Hash tables configured (established 131072 bind 65536)
  556. [    0.753422] TCP reno registered
  557. [    0.753424] UDP hash table entries: 512 (order: 2, 16384 bytes)
  558. [    0.753429] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  559. [    0.753504] NET: Registered protocol family 1
  560. [    0.753518] pci 0000:00:02.0: Boot video device
  561. [    0.753531] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  562. [    0.768568] pci 0000:00:1a.0: PCI INT A disabled
  563. [    0.768603] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  564. [    0.784542] pci 0000:00:1d.0: PCI INT A disabled
  565. [    0.784651] pci 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  566. [    0.797127] pci 0000:19:00.0: PCI INT A disabled
  567. [    0.797133] PCI: CLS 64 bytes, default 64
  568. [    0.797139] Simple Boot Flag at 0x44 set to 0x1
  569. [    0.797564] audit: initializing netlink socket (disabled)
  570. [    0.797576] type=2000 audit(1340264275.632:1): initialized
  571. [    0.802827] Freeing initrd memory: 13312k freed
  572. [    0.824960] highmem bounce pool size: 64 pages
  573. [    0.824966] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  574. [    0.833806] VFS: Disk quotas dquot_6.5.2
  575. [    0.833867] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  576. [    0.834441] fuse init (API version 7.16)
  577. [    0.834520] msgmni has been set to 1587
  578. [    0.834885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  579. [    0.834915] io scheduler noop registered
  580. [    0.834916] io scheduler deadline registered
  581. [    0.834929] io scheduler cfq registered (default)
  582. [    0.835015] pcieport 0000:00:01.0: setting latency timer to 64
  583. [    0.835044] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  584. [    0.835283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  585. [    0.835303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  586. [    0.835355] intel_idle: MWAIT substates: 0x21120
  587. [    0.835356] intel_idle: v0.4 model 0x2A
  588. [    0.835358] intel_idle: lapic_timer_reliable_states 0xffffffff
  589. [    0.836231] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  590. [    0.837222] ACPI: AC Adapter [AC] (on-line)
  591. [    0.837311] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0
  592. [    0.840566] ACPI: Lid Switch [LID]
  593. [    0.840618] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  594. [    0.840623] ACPI: Power Button [PWRB]
  595. [    0.840659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  596. [    0.840662] ACPI: Power Button [PWRF]
  597. [    0.840687] ACPI: acpi_idle yielding to intel_idle
  598. [    0.855117] thermal LNXTHERM:00: registered as thermal_zone0
  599. [    0.855124] ACPI: Thermal Zone [THRM] (42 C)
  600. [    0.855166] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  601. [    0.855179] ERST: Table is not found!
  602. [    0.855242] isapnp: Scanning for PnP cards...
  603. [    0.855247] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  604. [    0.887113] ACPI: Battery Slot [BAT0] (battery present)
  605. [    1.208712] isapnp: No Plug & Play device found
  606. [    1.256196] Linux agpgart interface v0.103
  607. [    1.256290] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
  608. [    1.256345] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  609. [    1.257317] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
  610. [    1.257424] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
  611. [    1.258477] brd: module loaded
  612. [    1.258970] loop: module loaded
  613. [    1.259379] Fixed MDIO Bus: probed
  614. [    1.259399] PPP generic driver version 2.4.2
  615. [    1.259429] tun: Universal TUN/TAP device driver, 1.6
  616. [    1.259431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  617. [    1.259498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  618. [    1.259514] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  619. [    1.259533] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  620. [    1.259537] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  621. [    1.259564] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  622. [    1.259589] ehci_hcd 0000:00:1a.0: debug port 2
  623. [    1.263464] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  624. [    1.263482] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc850a000
  625. [    1.275802] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  626. [    1.275967] hub 1-0:1.0: USB hub found
  627. [    1.275971] hub 1-0:1.0: 2 ports detected
  628. [    1.276024] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  629. [    1.276036] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  630. [    1.276040] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  631. [    1.276069] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  632. [    1.276090] ehci_hcd 0000:00:1d.0: debug port 2
  633. [    1.279979] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  634. [    1.279992] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc8509000
  635. [    1.295771] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  636. [    1.295929] hub 2-0:1.0: USB hub found
  637. [    1.295933] hub 2-0:1.0: 2 ports detected
  638. [    1.295980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  639. [    1.295991] uhci_hcd: USB Universal Host Controller Interface driver
  640. [    1.296055] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  641. [    1.303113] serio: i8042 KBD port at 0x60,0x64 irq 1
  642. [    1.303119] serio: i8042 AUX port at 0x60,0x64 irq 12
  643. [    1.303212] mousedev: PS/2 mouse device common for all mice
  644. [    1.303335] rtc_cmos 00:06: RTC can wake from S4
  645. [    1.303425] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  646. [    1.303454] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  647. [    1.303518] device-mapper: uevent: version 1.0.3
  648. [    1.303580] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  649. [    1.303604] EISA: Probing bus 0 at eisa.0
  650. [    1.303606] EISA: Cannot allocate resource for mainboard
  651. [    1.303608] Cannot allocate resource for EISA slot 1
  652. [    1.303610] Cannot allocate resource for EISA slot 2
  653. [    1.303611] Cannot allocate resource for EISA slot 3
  654. [    1.303613] Cannot allocate resource for EISA slot 4
  655. [    1.303614] Cannot allocate resource for EISA slot 5
  656. [    1.303616] Cannot allocate resource for EISA slot 6
  657. [    1.303618] Cannot allocate resource for EISA slot 7
  658. [    1.303630] Cannot allocate resource for EISA slot 8
  659. [    1.303631] EISA: Detected 0 cards.
  660. [    1.303640] cpufreq-nforce2: No nForce2 chipset.
  661. [    1.303760] cpuidle: using governor ladder
  662. [    1.303944] cpuidle: using governor menu
  663. [    1.303946] EFI Variables Facility v0.08 2004-May-17
  664. [    1.304147] TCP cubic registered
  665. [    1.304273] NET: Registered protocol family 10
  666. [    1.304707] NET: Registered protocol family 17
  667. [    1.304719] Registering the dns_resolver key type
  668. [    1.304736] Using IPI No-Shortcut mode
  669. [    1.304799] PM: Hibernation image not present or could not be loaded.
  670. [    1.304809] registered taskstats version 1
  671. [    1.310152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  672. [    1.314596]   Magic number: 0:898:622
  673. [    1.314675] rtc_cmos 00:06: setting system clock to 2012-06-21 07:37:56 UTC (1340264276)
  674. [    1.315432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  675. [    1.315433] EDD information not available.
  676. [    1.315590] Freeing unused kernel memory: 724k freed
  677. [    1.315813] Write protecting the kernel text: 5536k
  678. [    1.316196] Write protecting the kernel read-only data: 2244k
  679. [    1.316197] NX-protecting the kernel data: 4704k
  680. [    1.331955] udevd[88]: starting version 173
  681. [    1.357713] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  682. [    1.357740] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  683. [    1.357798] r8169 0000:07:00.0: setting latency timer to 64
  684. [    1.357808] r8169 0000:07:00.0: (unregistered net_device): unknown MAC, using family default
  685. [    1.357911] r8169 0000:07:00.0: irq 41 for MSI/MSI-X
  686. [    1.358690] r8169 0000:07:00.0: eth0: RTL8168b/8111b at 0xf843c000, 2c:27:d7:b1:ea:67, XID 0c900800 IRQ 41
  687. [    1.378163] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  688. [    1.378197] xhci_hcd 0000:19:00.0: setting latency timer to 64
  689. [    1.378204] xhci_hcd 0000:19:00.0: xHCI Host Controller
  690. [    1.378266] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
  691. [    1.378484] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc4400000
  692. [    1.378612] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
  693. [    1.378622] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
  694. [    1.378632] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
  695. [    1.378641] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
  696. [    1.378650] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
  697. [    1.378892] xHCI xhci_add_endpoint called for root hub
  698. [    1.378895] xHCI xhci_check_bandwidth called for root hub
  699. [    1.378932] hub 3-0:1.0: USB hub found
  700. [    1.378943] hub 3-0:1.0: 2 ports detected
  701. [    1.379022] xhci_hcd 0000:19:00.0: xHCI Host Controller
  702. [    1.379078] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
  703. [    1.379457] ahci 0000:00:1f.2: version 3.0
  704. [    1.379475] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  705. [    1.379567] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
  706. [    1.382011] xHCI xhci_add_endpoint called for root hub
  707. [    1.382013] xHCI xhci_check_bandwidth called for root hub
  708. [    1.382038] hub 4-0:1.0: USB hub found
  709. [    1.382048] hub 4-0:1.0: 2 ports detected
  710. [    1.395720] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
  711. [    1.395727] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  712. [    1.395736] ahci 0000:00:1f.2: setting latency timer to 64
  713. [    1.408480] scsi0 : ahci
  714. [    1.408627] scsi1 : ahci
  715. [    1.408739] scsi2 : ahci
  716. [    1.408850] scsi3 : ahci
  717. [    1.408963] scsi4 : ahci
  718. [    1.409061] scsi5 : ahci
  719. [    1.409179] ata1: SATA max UDMA/133 abar m2048@0xc8508000 port 0xc8508100 irq 47
  720. [    1.409181] ata2: DUMMY
  721. [    1.409182] ata3: DUMMY
  722. [    1.409184] ata4: DUMMY
  723. [    1.409185] ata5: DUMMY
  724. [    1.409188] ata6: SATA max UDMA/133 abar m2048@0xc8508000 port 0xc8508380 irq 47
  725. [    1.587434] usb 1-1: new high speed USB device number 2 using ehci_hcd
  726. [    1.719893] hub 1-1:1.0: USB hub found
  727. [    1.719979] hub 1-1:1.0: 6 ports detected
  728. [    1.727209] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  729. [    1.727260] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  730. [    1.727926] ata1.00: ATA-8: TOSHIBA MK5076GSX, GS001C, max UDMA/100
  731. [    1.727936] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  732. [    1.728827] ata1.00: configured for UDMA/100
  733. [    1.728974] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5076GS GS00 PQ: 0 ANSI: 5
  734. [    1.729163] sd 0:0:0:0: Attached scsi generic sg0 type 0
  735. [    1.729254] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  736. [    1.729308] sd 0:0:0:0: [sda] Write Protect is off
  737. [    1.729311] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  738. [    1.729327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  739. [    1.738886] ata6.00: ATAPI: hp       CDDVDW TS-L633J, HH00, max UDMA/100
  740. [    1.753809] ata6.00: configured for UDMA/100
  741. [    1.761670] scsi 5:0:0:0: CD-ROM            hp       CDDVDW TS-L633J  HH00 PQ: 0 ANSI: 5
  742. [    1.771166] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  743. [    1.771184] cdrom: Uniform CD-ROM driver Revision: 3.20
  744. [    1.771365] sr 5:0:0:0: Attached scsi CD-ROM sr0
  745. [    1.771539] sr 5:0:0:0: Attached scsi generic sg1 type 5
  746. [    1.795094] Refined TSC clocksource calibration: 2095.240 MHz.
  747. [    1.795108] Switching to clocksource tsc
  748. [    1.831068] usb 2-1: new high speed USB device number 2 using ehci_hcd
  749. [    1.831845]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
  750. [    1.832310] sd 0:0:0:0: [sda] Attached SCSI disk
  751. [    1.963524] hub 2-1:1.0: USB hub found
  752. [    1.963607] hub 2-1:1.0: 6 ports detected
  753. [    2.034763] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
  754. [    2.238469] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
  755. [    2.354371] input: Microsoft Microsoft Wireless Optical MouseĀ® 1.00 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
  756. [    2.354500] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical MouseĀ® 1.00] on usb-0000:00:1d.0-1.1/input0
  757. [    2.354519] usbcore: registered new interface driver usbhid
  758. [    2.354522] usbhid: USB HID core driver
  759. [    2.538340] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  760. [   23.484761] udevd[316]: starting version 173
  761. [   23.492733] lp: driver loaded but no devices found
  762. [   23.530526] hp_accel: laptop model unknown, using default axes configuration
  763. [   23.540110] Adding 6237180k swap on /dev/sda6.  Priority:-1 extents:1 across:6237180k
  764. [   23.544927] [drm] Initialized drm 1.1.0 20060810
  765. [   23.557193] mei: module is from the staging directory, the quality is unknown, you have been warned.
  766. [   23.558255] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  767. [   23.558264] mei 0000:00:16.0: setting latency timer to 64
  768. [   23.566791] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  769. [   23.566798] i915 0000:00:02.0: setting latency timer to 64
  770. [   23.570743] lis3lv02d: 8 bits 3DC sensor found
  771. [   23.581871] cfg80211: Calling CRDA to update world regulatory domain
  772. [   23.589881] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
  773. [   23.589886] [drm] MTRR allocation failed.  Graphics performance may suffer.
  774. [   23.590789] i915 0000:00:02.0: irq 48 for MSI/MSI-X
  775. [   23.590795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  776. [   23.590798] [drm] Driver supports precise vblank timestamp query.
  777. [   23.590845] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  778. [   23.609089] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  779. [   23.609094] iwlagn: Copyright(c) 2003-2011 Intel Corporation
  780. [   23.609196] iwlagn 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  781. [   23.609251] iwlagn 0000:0d:00.0: setting latency timer to 64
  782. [   23.609336] iwlagn 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
  783. [   23.623204] type=1400 audit(1340289498.840:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
  784. [   23.624791] type=1400 audit(1340289498.840:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
  785. [   23.625198] type=1400 audit(1340289498.840:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
  786. [   23.631775] iwlagn 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6
  787. [   23.631780] iwlagn 0000:0d:00.0: Device SKU: 0X9
  788. [   23.631782] iwlagn 0000:0d:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
  789. [   23.635956] iwlagn 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
  790. [   23.636395] iwlagn 0000:0d:00.0: irq 49 for MSI/MSI-X
  791. [   23.665240] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
  792. [   23.666359] Initializing Realtek PCIE storage driver...
  793. [   23.666398] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  794. [   23.667786] Resource length: 0x1000
  795. [   23.667804] Original address: 0xc4500000, remapped address: 0xf8466000
  796. [   23.667809] pci->irq = 18
  797. [   23.667812] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
  798. [   23.667843] rts_pstor 0000:13:00.0: setting latency timer to 64
  799. [   23.667849] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
  800. [   23.776261] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
  801. [   23.807584] cfg80211: World regulatory domain updated:
  802. [   23.807588] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  803. [   23.807592] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  804. [   23.807598] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  805. [   23.807601] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  806. [   23.807604] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  807. [   23.807607] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  808. [   23.863255] fbcon: inteldrmfb (fb0) is primary device
  809. [   23.863351] Console: switching to colour frame buffer device 170x48
  810. [   23.863389] fb0: inteldrmfb frame buffer device
  811. [   23.863392] drm: registered panic notifier
  812. [   23.870604] rts_pstor: waiting for device to settle before scanning
  813. [   23.898291] iwlagn 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138
  814. [   23.898423] Registered led device: phy0-led
  815. [   23.898454] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  816. [   23.901387] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  817. [   23.990879] acpi device:34: registered as cooling_device4
  818. [   23.991129] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
  819. [   23.991191] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  820. [   23.991246] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  821. [   23.991343] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  822. [   23.991426] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
  823. [   23.991469] HDA Intel 0000:00:1b.0: setting latency timer to 64
  824. [   24.109949] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
  825. [   24.110096] Registered led device: hp::hddprotect
  826. [   24.110114] hp_accel: driver loaded
  827. [   24.110290] wmi: Mapper loaded
  828. [   24.115664] input: HP WMI hotkeys as /devices/virtual/input/input7
  829. [   24.453077] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
  830. [   24.504877] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
  831. [   24.557339] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
  832. [   24.557516] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  833. [   24.557716] input: HDA Intel PCH Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  834. [   24.557885] input: HDA Intel PCH HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  835. [   24.640842] type=1400 audit(1340289499.856:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=934 comm="apparmor_parser"
  836. [   24.641170] type=1400 audit(1340289499.860:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=933 comm="apparmor_parser"
  837. [   24.641460] type=1400 audit(1340289499.860:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=934 comm="apparmor_parser"
  838. [   24.641789] type=1400 audit(1340289499.860:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=934 comm="apparmor_parser"
  839. [   24.644107] type=1400 audit(1340289499.860:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=932 comm="apparmor_parser"
  840. [   24.648408] type=1400 audit(1340289499.864:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=938 comm="apparmor_parser"
  841. [   24.648928] type=1400 audit(1340289499.864:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=938 comm="apparmor_parser"
  842. [   24.657637] r8169 0000:07:00.0: eth0: link down
  843. [   24.657873] ADDRCONF(NETDEV_UP): eth0: link is not ready
  844. [   24.787929] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  845. [   24.868988] init: failsafe main process (838) killed by TERM signal
  846. [   24.870416] init: apport pre-start process (979) terminated with status 1
  847. [   24.876595] rts_pstor: device scan complete
  848. [   24.877937] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
  849. [   24.877982] Bad LUN (0:1)
  850. [   24.893703] init: apport post-stop process (1020) terminated with status 1
  851. [   24.897481] Bad target number (1:0)
  852. [   24.903629] init: gdm main process (1018) killed by TERM signal
  853. [   24.928669] Bad target number (2:0)
  854. [   24.956663] Bad target number (3:0)
  855. [   24.981034] ppdev: user-space parallel port driver
  856. [   24.985325] Bad target number (4:0)
  857. [   25.004538] Bad target number (5:0)
  858. [   25.032476] Bad target number (6:0)
  859. [   25.052981] Bad target number (7:0)
  860. [   25.073090] sd 6:0:0:0: Attached scsi generic sg2 type 0
  861. [   25.078970] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  862. [   27.099012] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  863. [   27.101456] wlan0: authenticated
  864. [   27.107809] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  865. [   27.112255] wlan0: RX AssocResp from c4:3d:c7:97:66:10 (capab=0x31 status=0 aid=2)
  866. [   27.112260] wlan0: associated
  867. [   27.121070] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  868. [   32.135481] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
  869. [   33.339769] vboxdrv: Found 4 processor cores.
  870. [   33.339863] vboxdrv: fAsync=0 offMin=0x1c8 offMax=0x1b9d
  871. [   33.339923] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  872. [   33.339926] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
  873. [   33.355976] vboxpci: IOMMU not found (not registered)
  874. [   33.423107] Bluetooth: Core ver 2.16
  875. [   33.423131] NET: Registered protocol family 31
  876. [   33.423134] Bluetooth: HCI device and connection manager initialized
  877. [   33.423136] Bluetooth: HCI socket layer initialized
  878. [   33.423138] Bluetooth: L2CAP socket layer initialized
  879. [   33.423323] Bluetooth: SCO socket layer initialized
  880. [   33.425216] Bluetooth: RFCOMM TTY layer initialized
  881. [   33.425222] Bluetooth: RFCOMM socket layer initialized
  882. [   33.425225] Bluetooth: RFCOMM ver 1.11
  883. [   33.428707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  884. [   33.428712] Bluetooth: BNEP filters: protocol multicast
  885. [   33.773854] init: plymouth-stop pre-start process (1821) terminated with status 1
  886. [   45.300735] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  887. [   49.005849] iwlagn 0000:0d:00.0: iwlagn_tx_agg_start on ra = c4:3d:c7:97:66:10 tid = 0
  888. [14346.732164] cfg80211: All devices are disconnected, going to restore regulatory settings
  889. [14346.732180] cfg80211: Restoring regulatory settings
  890. [14346.732192] cfg80211: Calling CRDA to update world regulatory domain
  891. [14346.740134] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  892. [14346.740144] cfg80211: World regulatory domain updated:
  893. [14346.740149] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  894. [14346.740157] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  895. [14346.740163] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  896. [14346.740169] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  897. [14346.740175] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  898. [14346.740181] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  899. [14347.286377] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  900. [14347.288882] wlan0: authenticated
  901. [14347.289561] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  902. [14347.296852] wlan0: RX ReassocResp from c4:3d:c7:97:66:10 (capab=0x31 status=0 aid=2)
  903. [14347.296857] wlan0: associated
  904. [14408.212715] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  905. [14412.186622] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 6
  906. [14417.108211] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 4
  907. [14422.252498] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 2
  908. [14425.893957] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 6
  909. [14433.406649] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  910. [14439.915817] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 1
  911. [14453.543303] iwlagn 0000:0d:00.0: iwlagn_tx_agg_start on ra = c4:3d:c7:97:66:10 tid = 0
  912. [18540.572186] cfg80211: All devices are disconnected, going to restore regulatory settings
  913. [18540.572203] cfg80211: Restoring regulatory settings
  914. [18540.572214] cfg80211: Calling CRDA to update world regulatory domain
  915. [18540.580629] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  916. [18540.580639] cfg80211: World regulatory domain updated:
  917. [18540.580643] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  918. [18540.580651] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  919. [18540.580657] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  920. [18540.580664] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  921. [18540.580669] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  922. [18540.580675] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  923. [18541.140599] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  924. [18541.143028] wlan0: authenticated
  925. [18541.145961] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  926. [18541.149900] wlan0: RX ReassocResp from c4:3d:c7:97:66:10 (capab=0x31 status=0 aid=2)
  927. [18541.149904] wlan0: associated
  928. [18622.218763] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  929. [18646.807937] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  930. [18653.883633] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 1
  931. [18668.358108] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  932. [18686.146649] iwlagn 0000:0d:00.0: iwlagn_tx_agg_start on ra = c4:3d:c7:97:66:10 tid = 0
  933. [22853.935052] cfg80211: All devices are disconnected, going to restore regulatory settings
  934. [22853.935068] cfg80211: Restoring regulatory settings
  935. [22853.935078] cfg80211: Calling CRDA to update world regulatory domain
  936. [22853.943620] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  937. [22853.943631] cfg80211: World regulatory domain updated:
  938. [22853.943635] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  939. [22853.943643] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  940. [22853.943649] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  941. [22853.943655] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  942. [22853.943661] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  943. [22853.943667] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  944. [22854.525036] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  945. [22854.527452] wlan0: authenticated
  946. [22854.533081] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  947. [22854.539617] wlan0: RX ReassocResp from c4:3d:c7:97:66:10 (capab=0x431 status=0 aid=2)
  948. [22854.539630] wlan0: associated
  949. [22934.335253] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  950. [23000.964739] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  951. [23041.339973] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 1
  952. [23070.557559] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  953. [23093.615973] cfg80211: All devices are disconnected, going to restore regulatory settings
  954. [23093.615988] cfg80211: Restoring regulatory settings
  955. [23093.615998] cfg80211: Calling CRDA to update world regulatory domain
  956. [23093.624101] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  957. [23093.624112] cfg80211: World regulatory domain updated:
  958. [23093.624116] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  959. [23093.624124] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  960. [23093.624130] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  961. [23093.624136] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  962. [23093.624142] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  963. [23093.624148] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  964. [23094.234143] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  965. [23094.236428] wlan0: authenticated
  966. [23094.236735] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  967. [23094.241525] wlan0: RX ReassocResp from c4:3d:c7:97:66:10 (capab=0x431 status=0 aid=2)
  968. [23094.241530] wlan0: associated
  969. [23274.234007] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 0
  970. [23306.476538] iwlagn 0000:0d:00.0: Aggregation not enabled for tid 0 because load = 1
  971. [23341.524480] iwlagn 0000:0d:00.0: iwlagn_tx_agg_start on ra = c4:3d:c7:97:66:10 tid = 0
  972. [26688.324226] cfg80211: All devices are disconnected, going to restore regulatory settings
  973. [26688.324242] cfg80211: Restoring regulatory settings
  974. [26688.324278] cfg80211: Calling CRDA to update world regulatory domain
  975. [26688.329726] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  976. [26688.329736] cfg80211: World regulatory domain updated:
  977. [26688.329740] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  978. [26688.329748] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  979. [26688.329754] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  980. [26688.329760] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  981. [26688.329766] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  982. [26688.329772] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  983. [26688.868159] wlan0: authenticate with c4:3d:c7:97:66:10 (try 1)
  984. [26688.870578] wlan0: authenticated
  985. [26688.871167] wlan0: associate with c4:3d:c7:97:66:10 (try 1)
  986. [26688.879873] wlan0: RX ReassocResp from c4:3d:c7:97:66:10 (capab=0x31 status=0 aid=2)
  987. [26688.879877] wlan0: associated
  988. [26693.682878] iwlagn 0000:0d:00.0: iwlagn_tx_agg_start on ra = c4:3d:c7:97:66:10 tid = 0
  989. [29040.497738] wlan0: deauthenticating from c4:3d:c7:97:66:10 by local choice (reason=3)
  990. [29040.660745] cfg80211: All devices are disconnected, going to restore regulatory settings
  991. [29040.660758] cfg80211: Restoring regulatory settings
  992. [29040.660770] cfg80211: Calling CRDA to update world regulatory domain
  993. [29040.669607] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  994. [29040.669617] cfg80211: World regulatory domain updated:
  995. [29040.669622] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  996. [29040.669630] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  997. [29040.669637] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  998. [29040.669643] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  999. [29040.669649] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1000. [29040.669654] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1001. [29042.281114] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
  1002. [29043.523980] iwlagn 0000:0d:00.0: PCI INT A disabled
  1003. [29044.297689] PM: Syncing filesystems ... done.
  1004. [29044.364261] PM: Preparing system for mem sleep
  1005. [29044.629622] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1006. [29044.645561] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1007. [29044.661523] PM: Entering mem sleep
  1008. [29044.661618] Suspending console(s) (use no_console_suspend to debug)
  1009. [29044.662114] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1010. [29044.662233] sd 0:0:0:0: [sda] Stopping disk
  1011. [29044.711376] Ready to suspend
  1012. [29044.725436] ehci_hcd 0000:00:1a.0: PCI INT A disabled
  1013. [29044.725440] ehci_hcd 0000:00:1d.0: PCI INT A disabled
  1014. [29044.917349] HDA Intel 0000:00:1b.0: PCI INT A disabled
  1015. [29044.933056] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 221.678 msecs
  1016. [29045.247804] PM: suspend of drv:hp_accel dev:HPQ0004:00 complete after 537.295 msecs
  1017. [29045.284302] PM: suspend of drv:sd dev:0:0:0:0 complete after 623.114 msecs
  1018. [29045.284413] PM: suspend of drv:scsi dev:target0:0:0 complete after 623.175 msecs
  1019. [29045.284427] PM: suspend of drv:scsi dev:host0 complete after 623.092 msecs
  1020. [29045.304519] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 593.711 msecs
  1021. [29045.708001] rts_pstor 0000:13:00.0: PCI INT A disabled
  1022. [29045.723905] PM: suspend of drv:rts_pstor dev:0000:13:00.0 complete after 1014.037 msecs
  1023. [29045.723942] PM: suspend of drv:pcieport dev:0000:00:1c.2 complete after 1013.751 msecs
  1024. [29045.723984] PM: suspend of drv: dev:pci0000:00 complete after 1013.631 msecs
  1025. [29045.723998] PM: suspend of devices complete after 1063.744 msecs
  1026. [29045.724001] PM: suspend devices took 1.064 seconds
  1027. [29045.740339] r8169 0000:07:00.0: PME# enabled
  1028. [29045.759845] r8169 0000:07:00.0: wake-up capability enabled by ACPI
  1029. [29045.823807] PM: late suspend of devices complete after 99.933 msecs
  1030. [29045.824062] ACPI: Preparing to enter system sleep state S3
  1031. [29045.836038] PM: Saving platform NVS memory
  1032. [29045.837207] Disabling non-boot CPUs ...
  1033. [29045.939553] CPU 1 is now offline
  1034. [29046.043395] CPU 2 is now offline
  1035. [29046.147233] CPU 3 is now offline
  1036. [29046.147591] Extended CMOS year: 2000
  1037. [29046.147927] ACPI: Low-level resume complete
  1038. [29046.147969] PM: Restoring platform NVS memory
  1039. [29046.148362] CPU0: Thermal monitoring handled by SMI
  1040. [29046.148420] Extended CMOS year: 2000
  1041. [29046.148458] Enabling non-boot CPUs ...
  1042. [29046.148527] Booting Node 0 Processor 1 APIC 0x1
  1043. [29046.148529] smpboot cpu 1: start_ip = 99000
  1044. [29046.158761] Initializing CPU#1
  1045. [29046.235914] CPU1: Thermal monitoring handled by SMI
  1046. [29046.256464] CPU1 is up
  1047. [29046.256558] Booting Node 0 Processor 2 APIC 0x2
  1048. [29046.256560] smpboot cpu 2: start_ip = 99000
  1049. [29046.259859] Switched to NOHz mode on CPU #1
  1050. [29046.266829] Initializing CPU#2
  1051. [29046.343752] CPU2: Thermal monitoring handled by SMI
  1052. [29046.364390] CPU2 is up
  1053. [29046.364475] Booting Node 0 Processor 3 APIC 0x3
  1054. [29046.364478] smpboot cpu 3: start_ip = 99000
  1055. [29046.367698] Switched to NOHz mode on CPU #2
  1056. [29046.374746] Initializing CPU#3
  1057. [29046.451592] CPU3: Thermal monitoring handled by SMI
  1058. [29046.472411] CPU3 is up
  1059. [29046.475435] ACPI: Waking up from system sleep state S3
  1060. [29046.475542] Switched to NOHz mode on CPU #3
  1061. [29046.531674] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  1062. [29046.531701] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
  1063. [29046.531775] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
  1064. [29046.531819] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
  1065. [29046.531857] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040)
  1066. [29046.531907] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
  1067. [29046.531958] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
  1068. [29046.532005] pcieport 0000:00:1c.3: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
  1069. [29046.532064] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
  1070. [29046.532141] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
  1071. [29046.532245] r8169 0000:07:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  1072. [29046.532333] pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
  1073. [29046.532381] pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
  1074. [29046.532451] rts_pstor 0000:13:00.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
  1075. [29046.532462] rts_pstor 0000:13:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
  1076. [29046.532571] xhci_hcd 0000:19:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
  1077. [29046.532622] xhci_hcd 0000:19:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100402)
  1078. [29046.532767] PM: early resume of devices complete after 1.157 msecs
  1079. [29046.532845] i915 0000:00:02.0: setting latency timer to 64
  1080. [29046.532900] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1081. [29046.532909] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  1082. [29046.532944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  1083. [29046.532948] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  1084. [29046.532952] HDA Intel 0000:00:1b.0: setting latency timer to 64
  1085. [29046.532957] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  1086. [29046.532980] ahci 0000:00:1f.2: setting latency timer to 64
  1087. [29046.533018] Ready to resume
  1088. [29046.533025] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
  1089. [29046.533031] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  1090. [29046.533038] rts_pstor 0000:13:00.0: setting latency timer to 64
  1091. [29046.533043] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
  1092. [29046.533089] xhci_hcd 0000:19:00.0: setting latency timer to 64
  1093. [29046.533614] sd 0:0:0:0: [sda] Starting disk
  1094. [29046.536263] r8169 0000:07:00.0: wake-up capability disabled by ACPI
  1095. [29046.536271] r8169 0000:07:00.0: PME# disabled
  1096. [29046.661845] PM: resume of drv: dev:ep_00 complete after 128.115 msecs
  1097. [29046.661852] PM: resume of drv:usbhid dev:2-1.1:1.0 complete after 128.158 msecs
  1098. [29046.661865] PM: resume of drv: dev:ep_81 complete after 128.153 msecs
  1099. [29046.711327] PM: resume of drv:hub dev:1-1:1.0 complete after 178.066 msecs
  1100. [29046.711333] PM: resume of drv: dev:ep_00 complete after 178.004 msecs
  1101. [29046.711340] PM: resume of drv: dev:ep_81 complete after 178.046 msecs
  1102. [29046.735395] PM: resume of drv:rts_pstor dev:0000:13:00.0 complete after 202.675 msecs
  1103. [29046.735409] PM: resume of drv:scsi dev:host6 complete after 201.772 msecs
  1104. [29046.735420] PM: resume of drv:scsi dev:target6:0:0 complete after 201.749 msecs
  1105. [29046.735426] PM: resume of drv:scsi_host dev:host6 complete after 201.772 msecs
  1106. [29046.735433] PM: resume of drv:sd dev:6:0:0:0 complete after 201.745 msecs
  1107. [29046.735442] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 201.738 msecs
  1108. [29046.783291] usb 1-1.1: reset full speed USB device number 3 using ehci_hcd
  1109. [29046.837678] PM: resume of drv:i915 dev:0000:00:02.0 complete after 305.292 msecs
  1110. [29046.851038] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1111. [29046.876647] PM: resume of drv: dev:ep_00 complete after 343.308 msecs
  1112. [29046.876653] PM: resume of drv:usb dev:1-1.1:1.0 complete after 343.402 msecs
  1113. [29046.876671] PM: resume of drv: dev:ep_83 complete after 343.352 msecs
  1114. [29046.876674] PM: resume of drv: dev:ep_82 complete after 343.369 msecs
  1115. [29046.876682] PM: resume of drv: dev:ep_01 complete after 343.414 msecs
  1116. [29046.876684] PM: resume of drv: dev:ep_81 complete after 343.398 msecs
  1117. [29046.884992] ata6.00: configured for UDMA/100
  1118. [29047.386244] PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 824.822 msecs
  1119. [29047.390832] Extended CMOS year: 2000
  1120. [29048.145072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1121. [29048.149851] ata1.00: configured for UDMA/100
  1122. [29048.191595] PM: resume of drv:sd dev:0:0:0:0 complete after 1660.445 msecs
  1123. [29048.191636] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 801.951 msecs
  1124. [29048.191694] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1660.510 msecs
  1125. [29048.203780] PM: resume of devices complete after 1673.451 msecs
  1126. [29048.203850] PM: resume devices took 1.672 seconds
  1127. [29048.203870] PM: Finishing wakeup.
  1128. [29048.203872] Restarting tasks ... done.
  1129. [29048.237089] video LNXVIDEO:00: Restoring backlight state
  1130. [29048.292997] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
  1131. [29048.451741] cfg80211: Calling CRDA to update world regulatory domain
  1132. [29048.457866] cfg80211: World regulatory domain updated:
  1133. [29048.457872] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1134. [29048.457876] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1135. [29048.457879] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1136. [29048.457883] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1137. [29048.457886] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1138. [29048.457890] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1139. [29048.463070] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  1140. [29048.463075] iwlagn: Copyright(c) 2003-2011 Intel Corporation
  1141. [29048.463141] iwlagn 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  1142. [29048.463157] iwlagn 0000:0d:00.0: setting latency timer to 64
  1143. [29048.463193] iwlagn 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
  1144. [29048.484909] iwlagn 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6
  1145. [29048.484914] iwlagn 0000:0d:00.0: Device SKU: 0X9
  1146. [29048.484918] iwlagn 0000:0d:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
  1147. [29048.486212] iwlagn 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
  1148. [29048.486749] iwlagn 0000:0d:00.0: irq 50 for MSI/MSI-X
  1149. [29048.491578] iwlagn 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138
  1150. [29048.492059] Registered led device: phy0-led
  1151. [29048.492099] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  1152. [29048.492283] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  1153. [29049.278635] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
  1154. [29049.343975] r8169 0000:07:00.0: eth0: link down
  1155. [29049.344379] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1156. [29049.474037] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1157. [29051.998834] wlan0: direct probe to c4:3d:c7:97:66:10 (try 1/3)
  1158. [29052.195064] wlan0: direct probe to c4:3d:c7:97:66:10 (try 2/3)
  1159. [29052.394789] wlan0: direct probe to c4:3d:c7:97:66:10 (try 3/3)
  1160. [29052.594448] wlan0: direct probe to c4:3d:c7:97:66:10 timed out
  1161. [29054.603501] iwlagn 0000:0d:00.0: fail to flush all tx fifo queues
  1162. [29060.273344] wlan0: direct probe to c4:3d:c7:97:66:10 (try 1/3)
  1163. [29060.470795] wlan0: direct probe to c4:3d:c7:97:66:10 (try 2/3)
  1164. [29060.670435] wlan0: direct probe to c4:3d:c7:97:66:10 (try 3/3)
  1165. [29060.870128] wlan0: direct probe to c4:3d:c7:97:66:10 timed out
  1166. [29062.915124] iwlagn 0000:0d:00.0: fail to flush all tx fifo queues
  1167. [29079.843141] wlan0: direct probe to c4:3d:c7:97:66:10 (try 1/3)
  1168. [29080.041584] wlan0: direct probe to c4:3d:c7:97:66:10 (try 2/3)
  1169. [29080.241304] wlan0: direct probe to c4:3d:c7:97:66:10 (try 3/3)
  1170. [29080.440990] wlan0: direct probe to c4:3d:c7:97:66:10 timed out
  1171. [29082.446020] iwlagn 0000:0d:00.0: fail to flush all tx fifo queues
  1172. [29093.803871] wlan0: direct probe to c4:3d:c7:97:66:10 (try 1/3)
  1173. [29094.000808] wlan0: direct probe to c4:3d:c7:97:66:10 (try 2/3)
  1174. [29094.200523] wlan0: direct probe to c4:3d:c7:97:66:10 (try 3/3)
  1175. [29094.400247] wlan0: direct probe to c4:3d:c7:97:66:10 timed out
  1176. [29096.405216] iwlagn 0000:0d:00.0: fail to flush all tx fifo queues
  1177. [29102.022047] wlan0: direct probe to c4:3d:c7:97:66:10 (try 1/3)
  1178. [29102.220574] wlan0: direct probe to c4:3d:c7:97:66:10 (try 2/3)
  1179. [29102.420289] wlan0: direct probe to c4:3d:c7:97:66:10 (try 3/3)
  1180. [29102.619986] wlan0: direct probe to c4:3d:c7:97:66:10 timed out
  1181. [29104.624994] iwlagn 0000:0d:00.0: fail to flush all tx fifo queues
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top