API tools faq
paste
Advertisement
Guest User

5.11 Bootlog

a guest
Nov 1st, 2021
42
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.32 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 5.10.75 (user@arinc9) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r17586-91e07e52b6) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Oct 26 18:17:48 2021
  3. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt: Machine model: Asus RT-AC88U
  6. [ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '115200n8')
  7. [ 0.000000] printk: bootconsole [ns16550] enabled
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  12. [ 0.000000] HighMem [mem 0x0000000008000000-0x000000009fffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] node 0: [mem 0x0000000088000000-0x000000009fffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff]
  18. [ 0.000000] On node 0 totalpages: 131072
  19. [ 0.000000] Normal zone: 288 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] HighMem zone: 98304 pages, LIFO batch:31
  23. [ 0.000000] percpu: Embedded 14 pages/cpu s27212 r8192 d21940 u57344
  24. [ 0.000000] pcpu-alloc: s27212 r8192 d21940 u57344 alloc=14*4096
  25. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  26. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784
  27. [ 0.000000] Kernel command line: earlycon
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  30. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  31. [ 0.000000] Memory: 510336K/524288K available (5611K kernel code, 559K rwdata, 1352K rodata, 1024K init, 286K bss, 13952K reserved, 0K cma-reserved, 393216K highmem)
  32. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  33. [ 0.000000] rcu: Hierarchical RCU implementation.
  34. [ 0.000000] Tracing variant of Tasks RCU enabled.
  35. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  36. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  37. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
  38. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  39. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  40. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  41. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  42. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  43. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  44. [ 0.000000] random: get_random_bytes called from start_kernel+0x360/0x510 with crng_init=0
  45. [ 0.000007] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
  46. [ 0.016402] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
  47. [ 0.027543] Switching to timer-based delay loop, resolution 1ns
  48. [ 0.033670] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
  49. [ 0.044393] pid_max: default: 32768 minimum: 301
  50. [ 0.049130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  51. [ 0.056532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  52. [ 0.064887] CPU: Testing write buffer coherency: ok
  53. [ 0.069850] CPU0: Spectre v2: using BPIALL workaround
  54. [ 0.075113] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  55. [ 0.081225] Setting up static identity map for 0x100000 - 0x10003c
  56. [ 0.087592] rcu: Hierarchical SRCU implementation.
  57. [ 0.092529] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  58. [ 0.100402] smp: Bringing up secondary CPUs ...
  59. [ 0.105529] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  60. [ 0.105536] CPU1: Spectre v2: using BPIALL workaround
  61. [ 0.116440] smp: Brought up 1 node, 2 CPUs
  62. [ 0.120542] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
  63. [ 0.126973] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
  64. [ 0.135455] CPU: This may indicate a broken bootloader or firmware.
  65. [ 0.143685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  66. [ 0.153670] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  67. [ 0.160670] pinctrl core: initialized pinctrl subsystem
  68. [ 0.166323] NET: Registered protocol family 16
  69. [ 0.171322] DMA: preallocated 256 KiB pool for atomic coherent allocations
  70. [ 0.178873] thermal_sys: Registered thermal governor 'step_wise'
  71. [ 0.198982] clocksource: Switched to clocksource arm_global_timer
  72. [ 0.212006] NET: Registered protocol family 2
  73. [ 0.216593] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  74. [ 0.224207] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  75. [ 0.232691] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  76. [ 0.240417] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  77. [ 0.247541] TCP: Hash tables configured (established 1024 bind 1024)
  78. [ 0.254031] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  79. [ 0.260623] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  80. [ 0.267770] NET: Registered protocol family 1
  81. [ 0.272185] PCI: CLS 0 bytes, default 64
  82. [ 0.277559] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  83. [ 0.286103] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  84. [ 0.292028] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  85. [ 0.303048] bounce: pool size: 64 pages
  86. [ 0.307810] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  87. [ 0.314989] printk: console [ttyS0] disabled
  88. [ 0.319415] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud = 7812500) is a 16550
  89. [ 0.328263] printk: console [ttyS0] enabled
  90. [ 0.336682] printk: bootconsole [ns16550] disabled
  91. [ 0.347234] bcm2835-rng 18004000.rng: hwrng registered
  92. [ 1.027466] random: fast init done
  93. [ 1.030941] random: crng init done
  94. [ 1.035893] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
  95. [ 1.042304] nand: ESMT NAND 128MiB 3,3V 8-bit
  96. [ 1.046676] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  97. [ 1.054315] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
  98. [ 1.065225] Scanning device for bad blocks
  99. [ 1.976593] 3 fixed-partitions partitions found on MTD device brcmnand.0
  100. [ 1.983325] Creating 3 MTD partitions on "brcmnand.0":
  101. [ 1.988476] 0x000000000000-0x000000080000 : "boot"
  102. [ 1.993876] 0x000000080000-0x000000200000 : "nvram"
  103. [ 1.999306] 0x000000200000-0x000008000000 : "firmware"
  104. [ 2.006030] 2 trx partitions found on MTD device firmware
  105. [ 2.011468] Creating 2 MTD partitions on "firmware":
  106. [ 2.016451] 0x00000000001c-0x000000400000 : "linux"
  107. [ 2.021346] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
  108. [ 2.031062] 0x000000400000-0x000007e00000 : "ubi"
  109. [ 2.037801] bcm_iproc 18029200.spi: using bspi-mspi mode
  110. [ 2.044645] libphy: Fixed MDIO Bus: probed
  111. [ 2.049226] libphy: iProc MDIO bus: probed
  112. [ 2.053351] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
  113. [ 2.060750] libphy: mdio_mux: probed
  114. [ 2.065045] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
  115. [ 2.072914] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  116. [ 2.079061] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
  117. [ 2.088024] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  118. [ 2.098622] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  119. [ 2.098632] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
  120. [ 2.109369] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  121. [ 2.109377] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
  122. [ 2.119369] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  123. [ 2.129768] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  124. [ 2.140183] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  125. [ 2.150593] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  126. [ 2.160945] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  127. [ 2.171484] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  128. [ 2.182030] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  129. [ 2.192586] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  130. [ 2.192594] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
  131. [ 2.204624] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
  132. [ 2.215006] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
  133. [ 2.225388] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  134. [ 2.225395] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  135. [ 2.235601] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  136. [ 2.235609] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
  137. [ 2.245641] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  138. [ 2.245649] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  139. [ 2.256984] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  140. [ 2.256992] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  141. [ 2.269729] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  142. [ 2.269737] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
  143. [ 2.279793] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  144. [ 2.291389] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  145. [ 2.291397] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  146. [ 2.302851] bcma-host-soc 18000000.axi: bus0: Flash type not supported
  147. [ 2.320506] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
  148. [ 2.320752] bgmac_bcma bcma0:3: Found PHY addr: 0
  149. [ 2.325487] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
  150. [ 2.332064] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
  151. [ 2.338352] bgmac_bcma bcma0:3: Using random MAC: aa:13:ce:d1:d6:9d
  152. [ 2.345381] b53-srab-switch b53-srab-switch: invalid resource
  153. [ 2.351212] b53-srab-switch: probe of b53-srab-switch failed with error -22
  154. [ 2.358802] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
  155. [ 2.364481] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
  156. [ 2.372345] bgmac_bcma bcma0:5: Found PHY addr: 0
  157. [ 2.377077] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
  158. [ 2.384959] bgmac_bcma bcma0:6: Unsupported core_unit 3
  159. [ 2.390294] bgmac_bcma: probe of bcma0:6 failed with error -524
  160. [ 2.396335] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
  161. [ 2.403877] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
  162. [ 2.413483] OF: /axi@18000000/pcie@12000: Missing device_type
  163. [ 2.419255] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
  164. [ 2.538975] pcie_iproc_bcma bcma0:7: link: UP
  165. [ 2.543445] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
  166. [ 2.549762] pci_bus 0000:00: root bus resource [bus 00-ff]
  167. [ 2.555262] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  168. [ 2.562189] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
  169. [ 2.568217] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  170. [ 2.577902] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  171. [ 2.587594] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  172. [ 2.597362] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  173. [ 2.607136] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  174. [ 2.616935] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  175. [ 2.623048] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
  176. [ 2.633537] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  177. [ 2.643323] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  178. [ 2.653006] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
  179. [ 2.662695] PCI: bus0: Fast back to back transfers disabled
  180. [ 2.668283] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  181. [ 2.676316] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  182. [ 2.686217] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
  183. [ 2.692284] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  184. [ 2.699103] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  185. [ 2.705917] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  186. [ 2.713244] pci 0000:01:00.0: supports D1 D2
  187. [ 2.718220] PCI: bus1: Fast back to back transfers disabled
  188. [ 2.723846] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  189. [ 2.730503] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
  190. [ 2.737307] pci 0000:00:00.0: BAR 9: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
  191. [ 2.745081] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
  192. [ 2.752429] pci 0000:01:00.0: BAR 4: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
  193. [ 2.760204] pci 0000:01:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
  194. [ 2.767533] pci 0000:00:00.0: PCI bridge to [bus 01]
  195. [ 2.772512] pci 0000:00:00.0: bridge window [mem 0x08000000-0x08bfffff]
  196. [ 2.779320] pci 0000:00:00.0: bridge window [mem 0x08c00000-0x08cfffff 64bit pref]
  197. [ 2.787270] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
  198. [ 2.794809] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
  199. [ 2.804412] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
  200. [ 2.928973] pcie_iproc_bcma bcma0:8: link: UP
  201. [ 2.933442] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
  202. [ 2.939751] pci_bus 0001:00: root bus resource [bus 00-ff]
  203. [ 2.945253] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
  204. [ 2.952179] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
  205. [ 2.958236] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
  206. [ 2.965061] PCI: bus0: Fast back to back transfers disabled
  207. [ 2.970675] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  208. [ 2.978830] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
  209. [ 2.984894] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  210. [ 2.991721] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  211. [ 2.998528] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  212. [ 3.005862] pci 0001:01:00.0: supports D1 D2
  213. [ 3.010844] PCI: bus1: Fast back to back transfers disabled
  214. [ 3.016440] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  215. [ 3.023104] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
  216. [ 3.029918] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
  217. [ 3.037683] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
  218. [ 3.045026] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
  219. [ 3.052802] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
  220. [ 3.060141] pci 0001:00:00.0: PCI bridge to [bus 01]
  221. [ 3.065116] pci 0001:00:00.0: bridge window [mem 0x20000000-0x20bfffff]
  222. [ 3.071927] pci 0001:00:00.0: bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
  223. [ 3.079875] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
  224. [ 3.087390] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
  225. [ 3.097007] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
  226. [ 3.218972] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
  227. [ 3.225172] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
  228. [ 3.231958] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  229. [ 3.241025] bcma-host-soc 18000000.axi: bus0: Bus registered
  230. [ 3.247523] NET: Registered protocol family 10
  231. [ 3.252909] Segment Routing with IPv6
  232. [ 3.256632] NET: Registered protocol family 17
  233. [ 3.261352] 8021q: 802.1Q VLAN Support v1.8
  234. [ 3.265598] Registering SWP/SWPB emulation handler
  235. [ 3.273170] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
  236. [ 3.402306] libphy: dsa slave smi: probed
  237. [ 3.406892] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
  238. [ 3.419403] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
  239. [ 3.431861] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
  240. [ 3.444343] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
  241. [ 3.456746] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
  242. [ 3.469441] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
  243. [ 3.480301] DSA: tree 0 setup
  244. [ 3.483559] UBI: auto-attach mtd4
  245. [ 3.486901] ubi0: attaching mtd4
  246. [ 4.118688] ubi0: scanning is finished
  247. [ 4.131122] ubi0: attached mtd4 (name "ubi", size 122 MiB)
  248. [ 4.136641] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  249. [ 4.143559] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  250. [ 4.150370] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  251. [ 4.157344] ubi0: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
  252. [ 4.163365] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  253. [ 4.170607] ubi0: max/mean erase counter: 15/8, WL threshold: 4096, image sequence number: 2046302211
  254. [ 4.179849] ubi0: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB handling: 20
  255. [ 4.189136] ubi0: background thread "ubi_bgt0d" started, PID 435
  256. [ 4.195973] block ubiblock0_0: created from ubi0:0(rootfs)
  257. [ 4.201513] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  258. [ 4.212215] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  259. [ 4.220174] Freeing unused kernel memory: 1024K
  260. [ 4.259112] Run /sbin/init as init process
  261. [ 4.263219] with arguments:
  262. [ 4.263221] /sbin/init
  263. [ 4.263223] with environment:
  264. [ 4.263226] HOME=/
  265. [ 4.263228] TERM=linux
  266. [ 4.468813] init: Console is alive
  267. [ 4.472501] init: - watchdog -
  268. [ 4.717487] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  269. [ 4.783753] usbcore: registered new interface driver usbfs
  270. [ 4.789359] usbcore: registered new interface driver hub
  271. [ 4.794752] usbcore: registered new device driver usb
  272. [ 4.803803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  273. [ 4.811237] ehci-fsl: Freescale EHCI Host controller driver
  274. [ 4.817688] ehci-platform: EHCI generic platform driver
  275. [ 4.825561] ehci-platform 18021000.usb: EHCI Host Controller
  276. [ 4.831265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  277. [ 4.832069] ohci-platform: OHCI generic platform driver
  278. [ 4.837559] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
  279. [ 4.843005] ohci-platform 18022000.usb: Generic Platform OHCI controller
  280. [ 4.850829] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
  281. [ 4.857424] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
  282. [ 4.871492] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
  283. [ 4.889080] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
  284. [ 4.895771] hub 1-0:1.0: USB hub found
  285. [ 4.899614] hub 1-0:1.0: 2 ports detected
  286. [ 4.943540] hub 2-0:1.0: USB hub found
  287. [ 4.947353] hub 2-0:1.0: 2 ports detected
  288. [ 4.978821] xhci-hcd 18023000.usb: xHCI Host Controller
  289. [ 4.984110] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
  290. [ 4.991759] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000020000010010
  291. [ 5.000963] xhci-hcd 18023000.usb: irq 46, io mem 0x18023000
  292. [ 5.006762] xhci-hcd 18023000.usb: xHCI Host Controller
  293. [ 5.012029] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
  294. [ 5.019458] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
  295. [ 5.027799] hub 3-0:1.0: USB hub found
  296. [ 5.031645] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
  297. [ 5.039038] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  298. [ 5.047547] hub 4-0:1.0: USB hub found
  299. [ 5.051388] hub 4-0:1.0: 1 port detected
  300. [ 5.057925] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  301. [ 5.066972] init: - preinit -
  302. [ 6.164141] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
  303. [ 6.172771] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
  304. [ 6.180240] 8021q: adding VLAN 0 to HW filter on device lan1
  305. [ 6.239056] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  306. [ 10.391085] UBIFS (ubi0:1): Mounting in unauthenticated mode
  307. [ 10.396879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 593
  308. [ 10.498556] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  309. [ 10.506452] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  310. [ 10.516403] UBIFS (ubi0:1): FS size: 115421184 bytes (110 MiB, 909 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
  311. [ 10.527041] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  312. [ 10.533676] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID CF00D20B-1DF6-4150-A09D-E8A1026D7307, small LPT model
  313. [ 10.546211] mount_root: overlay filesystem has not been fully initialized yet
  314. [ 10.553834] mount_root: switching to ubifs overlay
  315. [ 10.817932] urandom-seed: Seed file not found (/etc/urandom.seed)
  316. [ 11.002572] procd: - early -
  317. [ 11.005578] procd: - watchdog -
  318. [ 11.532594] procd: - watchdog -
  319. [ 11.535984] procd: - ubus -
  320. [ 11.593291] procd: - init -
  321. [ 11.994131] kmodloader: loading kernel modules from /etc/modules.d/*
  322. [ 12.011481] urngd: v1.0.2 started.
  323. [ 12.068569] Loading modules backported from Linux version v5.11.22-0-gef8aed2fffe0
  324. [ 12.076204] Backport generated by backports.git v5.11.22-1-0-g49432781
  325. [ 12.099981] xt_time: kernel timezone is -0000
  326. [ 12.121095] PPP generic driver version 2.4.2
  327. [ 12.126852] NET: Registered protocol family 24
  328. [ 12.142834] usbcore: registered new interface driver brcmfmac
  329. [ 12.148738] pci_generic_config_write32: 50 callbacks suppressed
  330. [ 12.148750] pci_bus 0000:01: 1-byte config write to 0000:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
  331. [ 12.164527] pci 0000:00:00.0: enabling device (0140 -> 0142)
  332. [ 12.170268] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  333. [ 12.172563] kmodloader: done loading kernel modules from /etc/modules.d/*
  334. [ 12.179994] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  335. [ 12.180006] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
  336. [ 12.202663] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  337. [ 12.212374] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  338. [ 12.339342] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
  339. [ 12.575770] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
  340. [ 12.586950] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
  341. [ 12.901935] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
  342. [ 12.910783] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  343. [ 12.922096] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
  344. [ 12.945123] pci_bus 0001:01: 1-byte config write to 0001:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
  345. [ 12.954982] pci 0001:00:00.0: enabling device (0140 -> 0142)
  346. [ 12.960704] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  347. [ 12.970402] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  348. [ 12.980090] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
  349. [ 12.986203] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  350. [ 12.995898] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  351. [ 13.119369] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
  352. [ 13.131763] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
  353. [ 13.142945] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
  354. [ 13.465512] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
  355. [ 13.474344] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  356. [ 13.485653] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
  357. [ 17.859431] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
  358. [ 17.861197] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
  359. [ 17.876947] 8021q: adding VLAN 0 to HW filter on device lan1
  360. [ 17.949179] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  361. [ 17.956284] br0: port 1(lan1) entered blocking state
  362. [ 17.961429] br0: port 1(lan1) entered disabled state
  363. [ 17.966901] device lan1 entered promiscuous mode
  364. [ 17.971591] device eth1 entered promiscuous mode
  365. [ 18.257125] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
  366. [ 18.266610] 8021q: adding VLAN 0 to HW filter on device lan2
  367. [ 18.329385] br0: port 2(lan2) entered blocking state
  368. [ 18.334369] br0: port 2(lan2) entered disabled state
  369. [ 18.339839] device lan2 entered promiscuous mode
  370. [ 18.611302] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
  371. [ 18.620258] 8021q: adding VLAN 0 to HW filter on device lan3
  372. [ 18.679429] br0: port 3(lan3) entered blocking state
  373. [ 18.684416] br0: port 3(lan3) entered disabled state
  374. [ 18.689954] device lan3 entered promiscuous mode
  375. [ 18.961577] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
  376. [ 18.970425] 8021q: adding VLAN 0 to HW filter on device lan4
  377. [ 19.029313] br0: port 4(lan4) entered blocking state
  378. [ 19.034300] br0: port 4(lan4) entered disabled state
  379. [ 19.039756] device lan4 entered promiscuous mode
  380. [ 19.377270] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
  381. [ 19.386272] 8021q: adding VLAN 0 to HW filter on device wan
  382. [ 19.393282] b53-srab-switch 18007000.ethernet-switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
  383. [ 19.449452] br0: port 5(wan) entered blocking state
  384. [ 19.454380] br0: port 5(wan) entered disabled state
  385. [ 19.459830] device wan entered promiscuous mode
  386. [ 19.549666] br0: port 5(wan) entered blocking state
  387. [ 19.554566] br0: port 5(wan) entered forwarding state
  388. [ 19.709294] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  389. [ 19.829265] IPv6: ADDRCONF(NETDEV_CHANGE): br0.9: link becomes ready
  390.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!