Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 1
- 2 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 3
- 4 ### Activated Armbian ramlog partition with zstd compression
- 5
- 6 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 7
- 8 ### Activated Armbian ramlog partition with zstd compression
- 9
- 10 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 11
- 12 ### Activated Armbian ramlog partition with zstd compression
- 13
- 14 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 15
- 16 ### Activated Armbian ramlog partition with zstd compression
- 17
- 18 Tue 09 Mar 2021 08:17:14 AM UTC | pcDuino3 | 21.02.3 | armhf | armv7l | 5.10.21-sunxi
- 19
- 20 ### dmesg:
- 21
- 22 [ 0.000000] Booting Linux on physical CPU 0x0
- 23 [ 0.000000] Linux version 5.10.21-sunxi (root@hirsute) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.02.3 SMP Mon Mar 8 00:28:04 UTC 2021
- 24 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d
- 25 [ 0.000000] CPU: div instructions available: patching division code
- 26 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- 27 [ 0.000000] OF: fdt: Machine model: LinkSprite pcDuino3
- 28 [ 0.000000] Memory policy: Data cache writealloc
- 29 [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB
- 30 [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool
- 31 [ 0.000000] Zone ranges:
- 32 [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
- 33 [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff]
- 34 [ 0.000000] Movable zone start for each node
- 35 [ 0.000000] Early memory node ranges
- 36 [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- 37 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
- 38 [ 0.000000] On node 0 totalpages: 262144
- 39 [ 0.000000] Normal zone: 1728 pages used for memmap
- 40 [ 0.000000] Normal zone: 0 pages reserved
- 41 [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
- 42 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
- 43 [ 0.000000] psci: probing for conduit method from DT.
- 44 [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- 45 [ 0.000000] percpu: Embedded 20 pages/cpu s50764 r8192 d22964 u81920
- 46 [ 0.000000] pcpu-alloc: s50764 r8192 d22964 u81920 alloc=20*4096
- 47 [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- 48 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
- 49 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=ed8d89fc-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
- 50 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- 51 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- 52 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- 53 [ 0.000000] Memory: 912356K/1048576K available (9216K kernel code, 1458K rwdata, 3220K rodata, 1024K init, 331K bss, 37916K reserved, 98304K cma-reserved, 262144K highmem)
- 54 [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x1d/0x29c with crng_init=0
- 55 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- 56 [ 0.000000] ftrace: allocating 41988 entries in 83 pages
- /usr/bin/armbianmonitor: line 862: [: -gt: unary operator expected
- 57 [ 0.000000] ftrace: allocated 83 pages with 4 groups
- 58 [ 0.000000] rcu: Hierarchical RCU implementation.
- 59 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
- 60 [ 0.000000] Rude variant of Tasks RCU enabled.
- 61 [ 0.000000] Tracing variant of Tasks RCU enabled.
- 62 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- 63 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- 64 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- 65 [ 0.000000] GIC: Using split EOI/Deactivate mode
- 66 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- 67 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- 68 [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- 69 [ 0.000019] Switching to timer-based delay loop, resolution 41ns
- 70 [ 0.000541] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- 71 [ 0.000876] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
- 72 [ 0.001217] Console: colour dummy device 80x30
- 73 [ 0.001289] printk: console [tty1] enabled
- 74 [ 0.001352] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- 75 [ 0.001373] pid_max: default: 32768 minimum: 301
- 76 [ 0.001625] LSM: Security Framework initializing
- 77 [ 0.001695] Yama: becoming mindful.
- 78 [ 0.001906] AppArmor: AppArmor initialized
- 79 [ 0.002006] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- 80 [ 0.002023] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- 81 [ 0.003202] CPU: Testing write buffer coherency: ok
- 82 [ 0.003665] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- 83 [ 0.004642] Setting up static identity map for 0x40100000 - 0x40100054
- 84 [ 0.004797] rcu: Hierarchical SRCU implementation.
- 85 [ 0.006152] smp: Bringing up secondary CPUs ...
- 86 [ 0.017096] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- 87 [ 0.017277] smp: Brought up 1 node, 2 CPUs
- 88 [ 0.017293] SMP: Total of 2 processors activated (96.00 BogoMIPS).
- 89 [ 0.017299] CPU: All CPU(s) started in HYP mode.
- 90 [ 0.017304] CPU: Virtualization extensions available.
- 91 [ 0.018224] allocated 1048576 bytes of page_ext
- 92 [ 0.018928] devtmpfs: initialized
- 93 [ 0.028938] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- 94 [ 0.029336] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- 95 [ 0.029380] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- 96 [ 0.032198] pinctrl core: initialized pinctrl subsystem
- 97 [ 0.033636] NET: Registered protocol family 16
- 98 [ 0.035511] DMA: preallocated 256 KiB pool for atomic coherent allocations
- 99 [ 0.036258] audit: initializing netlink subsys (disabled)
- 100 [ 0.036629] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
- 101 [ 0.037326] thermal_sys: Registered thermal governor 'fair_share'
- 102 [ 0.037337] thermal_sys: Registered thermal governor 'bang_bang'
- 103 [ 0.037344] thermal_sys: Registered thermal governor 'step_wise'
- 104 [ 0.037657] cpuidle: using governor ladder
- 105 [ 0.037686] cpuidle: using governor menu
- 106 [ 0.038260] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- 107 [ 0.038268] hw-breakpoint: maximum watchpoint size is 8 bytes.
- 108 [ 0.066496] cryptd: max_cpu_qlen set to 1000
- 109 [ 0.137568] raid6: neonx8 gen() 704 MB/s
- 110 [ 0.205694] raid6: neonx8 xor() 521 MB/s
- 111 [ 0.273833] raid6: neonx4 gen() 751 MB/s
- 112 [ 0.341963] raid6: neonx4 xor() 571 MB/s
- 113 [ 0.410116] raid6: neonx2 gen() 827 MB/s
- 114 [ 0.478222] raid6: neonx2 xor() 590 MB/s
- 115 [ 0.546370] raid6: neonx1 gen() 737 MB/s
- 116 [ 0.614488] raid6: neonx1 xor() 511 MB/s
- 117 [ 0.682690] raid6: int32x8 gen() 274 MB/s
- 118 [ 0.750787] raid6: int32x8 xor() 162 MB/s
- 119 [ 0.818908] raid6: int32x4 gen() 320 MB/s
- 120 [ 0.887069] raid6: int32x4 xor() 186 MB/s
- 121 [ 0.955158] raid6: int32x2 gen() 361 MB/s
- 122 [ 1.023345] raid6: int32x2 xor() 193 MB/s
- 123 [ 1.091445] raid6: int32x1 gen() 363 MB/s
- 124 [ 1.159568] raid6: int32x1 xor() 173 MB/s
- 125 [ 1.159574] raid6: using algorithm neonx2 gen() 827 MB/s
- 126 [ 1.159579] raid6: .... xor() 590 MB/s, rmw enabled
- 127 [ 1.159586] raid6: using neon recovery algorithm
- 128 [ 1.161384] iommu: Default domain type: Translated
- 129 [ 1.161793] SCSI subsystem initialized
- 130 [ 1.162157] libata version 3.00 loaded.
- 131 [ 1.162427] usbcore: registered new interface driver usbfs
- 132 [ 1.162490] usbcore: registered new interface driver hub
- 133 [ 1.162540] usbcore: registered new device driver usb
- 134 [ 1.162658] mc: Linux media interface: v0.10
- 135 [ 1.162697] videodev: Linux video capture interface: v2.00
- 136 [ 1.162850] pps_core: LinuxPPS API ver. 1 registered
- 137 [ 1.162858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- 138 [ 1.162887] PTP clock support registered
- 139 [ 1.163416] Advanced Linux Sound Architecture Driver Initialized.
- 140 [ 1.164288] NetLabel: Initializing
- 141 [ 1.164301] NetLabel: domain hash size = 128
- 142 [ 1.164306] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- 143 [ 1.164402] NetLabel: unlabeled traffic allowed by default
- 144 [ 1.165246] clocksource: Switched to clocksource arch_sys_counter
- 145 [ 1.289887] VFS: Disk quotas dquot_6.6.0
- 146 [ 1.290008] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- 147 [ 1.290715] AppArmor: AppArmor Filesystem Enabled
- 148 [ 1.300218] NET: Registered protocol family 2
- 149 [ 1.301198] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- 150 [ 1.301395] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- 151 [ 1.301509] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- 152 [ 1.301635] TCP: Hash tables configured (established 8192 bind 8192)
- 153 [ 1.301818] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- 154 [ 1.301896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- 155 [ 1.302225] NET: Registered protocol family 1
- 156 [ 1.303019] Trying to unpack rootfs image as initramfs...
- 157 [ 2.145079] Freeing initrd memory: 11256K
- 158 [ 2.145916] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- 159 [ 2.146282] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- 160 [ 2.147712] Initialise system trusted keyrings
- 161 [ 2.147779] Key type blacklist registered
- 162 [ 2.148118] workingset: timestamp_bits=14 max_order=18 bucket_order=4
- 163 [ 2.154093] zbud: loaded
- 164 [ 2.155756] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- 165 [ 2.157027] fuse: init (API version 7.32)
- 166 [ 2.160267] integrity: Platform Keyring initialized
- 167 [ 2.276371] xor: measuring software checksum speed
- 168 [ 2.284804] arm4regs : 1177 MB/sec
- 169 [ 2.296894] 8regs : 814 MB/sec
- 170 [ 2.309679] 32regs : 770 MB/sec
- 171 [ 2.317924] neon : 1195 MB/sec
- 172 [ 2.317931] xor: using function: neon (1195 MB/sec)
- 173 [ 2.317949] Key type asymmetric registered
- 174 [ 2.317957] Asymmetric key parser 'x509' registered
- 175 [ 2.318149] bounce: pool size: 64 pages
- 176 [ 2.318241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- 177 [ 2.318518] io scheduler mq-deadline registered
- 178 [ 2.318529] io scheduler kyber registered
- 179 [ 2.318840] io scheduler bfq registered
- 180 [ 2.323956] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- 181 [ 2.335386] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- 182 [ 2.338414] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
- 183 [ 2.339160] printk: console [ttyS0] disabled
- 184 [ 2.339270] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 55, base_baud = 1500000) is a 16550A
- 185 [ 2.339547] printk: console [ttyS0] enabled
- 186 [ 2.348442] brd: module loaded
- 187 [ 2.357199] loop: module loaded
- 188 [ 2.358291] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
- 189 [ 2.358519] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
- 190 [ 2.360128] libphy: Fixed MDIO Bus: probed
- 191 [ 2.360790] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- 192 [ 2.361026] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
- 193 [ 2.361038] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
- 194 [ 2.361154] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
- 195 [ 2.361167] sun7i-dwmac 1c50000.ethernet: no reset control found
- 196 [ 2.361198] sun7i-dwmac 1c50000.ethernet: no regulator found
- 197 [ 2.361692] sun7i-dwmac 1c50000.ethernet: Version ID not available
- 198 [ 2.361711] sun7i-dwmac 1c50000.ethernet: DWMAC1000
- 199 [ 2.361722] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
- 200 [ 2.361732] sun7i-dwmac 1c50000.ethernet: Normal descriptors
- 201 [ 2.361740] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
- 202 [ 2.362378] libphy: stmmac: probed
- 203 [ 2.374513] realtek: module verification failed: signature and/or required key missing - tainting kernel
- 204 [ 2.383796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- 205 [ 2.383837] ehci-platform: EHCI generic platform driver
- 206 [ 2.384334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- 207 [ 2.384363] ohci-platform: OHCI generic platform driver
- 208 [ 2.385194] usbcore: registered new interface driver usb-storage
- 209 [ 2.386382] sunxi-rtc 1c20d00.rtc: registered as rtc0
- 210 [ 2.386440] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T01:26:52 UTC (5212)
- 211 [ 2.386599] i2c /dev entries driver
- 212 [ 2.387803] axp20x-i2c 0-0034: AXP20x variant AXP209 found
- 213 [ 2.394908] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
- 214 [ 2.404025] vdd-rtc: supplied by regulator-dummy
- 215 [ 2.405194] avcc: supplied by regulator-dummy
- 216 [ 2.406027] ldo3: supplied by regulator-dummy
- 217 [ 2.406307] ldo4: supplied by regulator-dummy
- 218 [ 2.407375] ldo5: supplied by regulator-dummy
- 219 [ 2.408117] vdd-cpu: supplied by regulator-dummy
- 220 [ 2.408824] vdd-int-pll: supplied by regulator-dummy
- 221 [ 2.412057] random: fast init done
- 222 [ 2.412369] axp20x-i2c 0-0034: Backup (RTC) battery charging is disabled
- 223 [ 2.412513] axp20x-i2c 0-0034: AXP20X driver loaded
- 224 [ 2.414523] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- 225 [ 2.415760] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- 226 [ 2.415870] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
- 227 [ 2.416968] ledtrig-cpu: registered to indicate activity on CPUs
- 228 [ 2.417351] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- 229 [ 2.417456] sun4i-ss 1c15000.crypto-engine: Die ID 0
- 230 [ 2.419733] hid: raw HID events driver (C) Jiri Kosina
- 231 [ 2.419916] usbcore: registered new interface driver usbhid
- 232 [ 2.419924] usbhid: USB HID core driver
- 233 [ 2.422762] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
- 234 [ 2.426820] Initializing XFRM netlink socket
- 235 [ 2.427446] NET: Registered protocol family 10
- 236 [ 2.441812] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
- 237 [ 2.472463] Segment Routing with IPv6
- 238 [ 2.472618] NET: Registered protocol family 17
- 239 [ 2.472662] NET: Registered protocol family 15
- 240 [ 2.472763] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- 241 [ 2.472965] 8021q: 802.1Q VLAN Support v1.8
- 242 [ 2.473042] Key type dns_resolver registered
- 243 [ 2.473620] Registering SWP/SWPB emulation handler
- 244 [ 2.474054] registered taskstats version 1
- 245 [ 2.474068] Loading compiled-in X.509 certificates
- 246 [ 2.481822] Loaded X.509 cert 'Build time autogenerated kernel key: b55cc50c0b5861053e31ca5c6be0f880e49735e6'
- 247 [ 2.485124] zswap: loaded using pool zstd/z3fold
- 248 [ 2.486247] Key type ._fscrypt registered
- 249 [ 2.486261] Key type .fscrypt registered
- 250 [ 2.486267] Key type fscrypt-provisioning registered
- 251 [ 2.491136] mmc0: host does not support reading read-only switch, assuming write-enable
- 252 [ 2.492424] Btrfs loaded, crc32c=crc32c-generic
- 253 [ 2.494812] mmc0: new high speed SDHC card at address aaaa
- 254 [ 2.496768] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
- 255 [ 2.501199] mmcblk0: p1
- 256 [ 2.506437] Key type encrypted registered
- 257 [ 2.506468] AppArmor: AppArmor sha1 policy hashing enabled
- 258 [ 2.525339] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
- 259 [ 2.525563] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
- 260 [ 2.581285] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- 261 [ 2.581302] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
- 262 [ 2.581367] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- 263 [ 2.581384] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
- 264 [ 2.582635] scsi host0: ahci-sunxi
- 265 [ 2.583089] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 43
- 266 [ 2.584062] ehci-platform 1c14000.usb: EHCI Host Controller
- 267 [ 2.584101] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
- 268 [ 2.584563] ehci-platform 1c14000.usb: irq 40, io mem 0x01c14000
- 269 [ 2.597280] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- 270 [ 2.597671] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 271 [ 2.597684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 272 [ 2.597693] usb usb1: Product: EHCI Host Controller
- 273 [ 2.597701] usb usb1: Manufacturer: Linux 5.10.21-sunxi ehci_hcd
- 274 [ 2.597709] usb usb1: SerialNumber: 1c14000.usb
- 275 [ 2.598438] hub 1-0:1.0: USB hub found
- 276 [ 2.598499] hub 1-0:1.0: 1 port detected
- 277 [ 2.599775] ehci-platform 1c1c000.usb: EHCI Host Controller
- 278 [ 2.599811] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- 279 [ 2.600189] ehci-platform 1c1c000.usb: irq 44, io mem 0x01c1c000
- 280 [ 2.613273] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- 281 [ 2.613640] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 282 [ 2.613654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 283 [ 2.613663] usb usb2: Product: EHCI Host Controller
- 284 [ 2.613671] usb usb2: Manufacturer: Linux 5.10.21-sunxi ehci_hcd
- 285 [ 2.613679] usb usb2: SerialNumber: 1c1c000.usb
- 286 [ 2.614349] hub 2-0:1.0: USB hub found
- 287 [ 2.614405] hub 2-0:1.0: 1 port detected
- 288 [ 2.615689] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- 289 [ 2.615725] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
- 290 [ 2.616101] ohci-platform 1c14400.usb: irq 41, io mem 0x01c14400
- 291 [ 2.677518] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
- 292 [ 2.677534] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 293 [ 2.677543] usb usb3: Product: Generic Platform OHCI controller
- 294 [ 2.677550] usb usb3: Manufacturer: Linux 5.10.21-sunxi ohci_hcd
- 295 [ 2.677558] usb usb3: SerialNumber: 1c14400.usb
- 296 [ 2.678264] hub 3-0:1.0: USB hub found
- 297 [ 2.678322] hub 3-0:1.0: 1 port detected
- 298 [ 2.679643] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- 299 [ 2.679680] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
- 300 [ 2.680034] ohci-platform 1c1c400.usb: irq 45, io mem 0x01c1c400
- 301 [ 2.741463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
- 302 [ 2.741478] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 303 [ 2.741488] usb usb4: Product: Generic Platform OHCI controller
- 304 [ 2.741495] usb usb4: Manufacturer: Linux 5.10.21-sunxi ohci_hcd
- 305 [ 2.741503] usb usb4: SerialNumber: 1c1c400.usb
- 306 [ 2.742231] hub 4-0:1.0: USB hub found
- 307 [ 2.742286] hub 4-0:1.0: 1 port detected
- 308 [ 2.743431] of_cfs_init
- 309 [ 2.743595] of_cfs_init: OK
- 310 [ 2.743805] ALSA device list:
- 311 [ 2.743818] #0: sun4i-codec
- 312 [ 2.899692] ata1: SATA link down (SStatus 0 SControl 300)
- 313 [ 2.904129] Freeing unused kernel memory: 1024K
- 314 [ 2.904405] Run /init as init process
- 315 [ 2.904416] with arguments:
- 316 [ 2.904422] /init
- 317 [ 2.904428] with environment:
- 318 [ 2.904433] HOME=/
- 319 [ 2.904439] TERM=linux
- 320 [ 2.904445] ubootpart=ed8d89fc-01
- 321 [ 2.904451] ubootsource=mmc
- 322 [ 2.904456] sunxi_ve_mem_reserve=0
- 323 [ 2.904461] sunxi_g2d_mem_reserve=0
- 324 [ 2.904467] sunxi_fb_mem_reserve=16
- 325 [ 2.904472] cgroup_enable=memory
- 326 [ 2.933370] usb 1-1: new high-speed USB device number 2 using ehci-platform
- 327 [ 2.949358] usb 2-1: new high-speed USB device number 2 using ehci-platform
- 328 [ 3.094394] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
- 329 [ 3.094417] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- 330 [ 3.094426] usb 1-1: Product: 802.11n NIC
- 331 [ 3.094435] usb 1-1: Manufacturer: Realtek
- 332 [ 3.094444] usb 1-1: SerialNumber: 8C18D9730032
- 333 [ 3.106644] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- 334 [ 3.106665] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- 335 [ 3.106674] usb 2-1: Product: USB 2.0 Hub
- 336 [ 3.109496] hub 2-1:1.0: USB hub found
- 337 [ 3.113378] hub 2-1:1.0: 4 ports detected
- 338 [ 3.501389] usb 2-1.1: new full-speed USB device number 3 using ehci-platform
- 339 [ 3.615231] input: gpio-keys as /devices/platform/gpio-keys/input/input1
- 340 [ 3.731913] usb 2-1.1: New USB device found, idVendor=3938, idProduct=1032, bcdDevice= 1.08
- 341 [ 3.731934] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 342 [ 3.731943] usb 2-1.1: Product: 2.4G RF Keyboard & Mouse
- 343 [ 3.731951] usb 2-1.1: Manufacturer: MOSART Semi.
- 344 [ 3.736285] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:3938:1032.0001/input/input2
- 345 [ 3.793708] hid-generic 0003:3938:1032.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input0
- 346 [ 3.800151] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input3
- 347 [ 3.800440] input: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input4
- 348 [ 3.859321] input: MOSART Semi. 2.4G RF Keyboard & Mouse System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input5
- 349 [ 3.859594] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input7
- 350 [ 3.860255] hid-generic 0003:3938:1032.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input1
- 351 [ 3.915053] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator
- 352 [ 3.916512] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- 353 [ 3.916553] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
- 354 [ 3.916674] phy id_det change to device
- 355 [ 3.926966] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 356 [ 3.926987] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 357 [ 3.926997] usb usb5: Product: MUSB HDRC host driver
- 358 [ 3.927005] usb usb5: Manufacturer: Linux 5.10.21-sunxi musb-hcd
- 359 [ 3.927014] usb usb5: SerialNumber: musb-hdrc.1.auto
- 360 [ 3.927992] hub 5-0:1.0: USB hub found
- 361 [ 3.929402] hub 5-0:1.0: 1 port detected
- 362 [ 4.053474] sun5i-a13-gpadc-iio: Failed to locate of_node [id: 0]
- 363 [ 4.057344] usb 2-1.2: new low-speed USB device number 4 using ehci-platform
- 364 [ 4.159073] axp20x-gpio axp20x-gpio: DMA mask not set
- 365 [ 4.170764] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
- 366 [ 4.274129] usb 2-1.2: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11
- 367 [ 4.274152] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 368 [ 4.274161] usb 2-1.2: Product: 2.4G RX
- 369 [ 4.274169] usb 2-1.2: Manufacturer: DaKai
- 370 [ 4.280353] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:0E8F:00A8.0003/input/input8
- 371 [ 4.337651] hid-generic 0003:0E8F:00A8.0003: input,hidraw2: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input0
- 372 [ 4.347808] input: DaKai 2.4G RX Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input9
- 373 [ 4.347987] input: DaKai 2.4G RX System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input10
- 374 [ 4.405612] input: DaKai 2.4G RX Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input11
- 375 [ 4.405802] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input12
- 376 [ 4.406292] hid-generic 0003:0E8F:00A8.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input1
- 377 [ 5.150247] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- 378 [ 5.890838] systemd[1]: System time before build time, advancing clock.
- 379 [ 5.924800] systemd[1]: Inserted module 'autofs4'
- 380 [ 6.005106] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- 381 [ 6.006044] systemd[1]: Detected architecture arm.
- 382 [ 6.043369] systemd[1]: Set hostname to <pcduino3>.
- 383 [ 6.625516] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
- 384 [ 7.090671] random: systemd: uninitialized urandom read (16 bytes read)
- 385 [ 7.097064] systemd[1]: Created slice system-modprobe.slice.
- 386 [ 7.098093] random: systemd: uninitialized urandom read (16 bytes read)
- 387 [ 7.100358] systemd[1]: Created slice system-serial\x2dgetty.slice.
- 388 [ 7.100950] random: systemd: uninitialized urandom read (16 bytes read)
- 389 [ 7.102932] systemd[1]: Created slice User and Session Slice.
- 390 [ 7.103565] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 391 [ 7.104195] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- 392 [ 7.106311] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- 393 [ 7.107124] systemd[1]: Reached target Local Encrypted Volumes.
- 394 [ 7.107971] systemd[1]: Reached target Remote File Systems.
- 395 [ 7.108418] systemd[1]: Reached target Slices.
- 396 [ 7.108885] systemd[1]: Reached target Swap.
- 397 [ 7.109537] systemd[1]: Reached target System Time Set.
- 398 [ 7.110951] systemd[1]: Listening on Syslog Socket.
- 399 [ 7.112385] systemd[1]: Listening on fsck to fsckd communication Socket.
- 400 [ 7.113536] systemd[1]: Listening on initctl Compatibility Named Pipe.
- 401 [ 7.115669] systemd[1]: Listening on Journal Audit Socket.
- 402 [ 7.117059] systemd[1]: Listening on Journal Socket (/dev/log).
- 403 [ 7.118759] systemd[1]: Listening on Journal Socket.
- 404 [ 7.120371] systemd[1]: Listening on udev Control Socket.
- 405 [ 7.121664] systemd[1]: Listening on udev Kernel Socket.
- 406 [ 7.123042] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 407 [ 7.131071] systemd[1]: Mounting POSIX Message Queue File System...
- 408 [ 7.141410] systemd[1]: Mounting Kernel Debug File System...
- 409 [ 7.152790] systemd[1]: Mounting Kernel Trace File System...
- 410 [ 7.169029] systemd[1]: Starting Restore / save the current clock...
- 411 [ 7.184004] systemd[1]: Starting Set the console keyboard layout...
- 412 [ 7.195145] systemd[1]: Starting Create list of static device nodes for the current kernel...
- 413 [ 7.196204] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
- 414 [ 7.219468] systemd[1]: Started Nameserver information manager.
- 415 [ 7.222667] systemd[1]: Reached target Network (Pre).
- 416 [ 7.234018] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 417 [ 7.234489] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- 418 [ 7.252202] systemd[1]: Starting Load Kernel Modules...
- 419 [ 7.262848] systemd[1]: Starting Remount Root and Kernel File Systems...
- 420 [ 7.289583] systemd[1]: Starting udev Coldplug all Devices...
- 421 [ 7.324958] systemd[1]: Mounted POSIX Message Queue File System.
- 422 [ 7.342890] systemd[1]: Mounted Kernel Debug File System.
- 423 [ 7.344962] systemd[1]: Mounted Kernel Trace File System.
- 424 [ 7.355336] systemd[1]: Finished Restore / save the current clock.
- 425 [ 7.373560] systemd[1]: Finished Create list of static device nodes for the current kernel.
- 426 [ 7.406012] systemd[1]: Finished Load Kernel Modules.
- 427 [ 7.418700] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
- 428 [ 7.435063] systemd[1]: Mounting FUSE Control File System...
- 429 [ 7.450328] systemd[1]: Mounting Kernel Configuration File System...
- 430 [ 7.475116] systemd[1]: Starting Apply Kernel Variables...
- 431 [ 7.499398] systemd[1]: Finished Remount Root and Kernel File Systems.
- 432 [ 7.511894] systemd[1]: Mounted FUSE Control File System.
- 433 [ 7.522293] systemd[1]: Mounted Kernel Configuration File System.
- 434 [ 7.535001] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 435 [ 7.535392] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 436 [ 7.547410] systemd[1]: Starting Load/Save Random Seed...
- 437 [ 7.565041] systemd[1]: Starting Create System Users...
- 438 [ 7.707440] systemd[1]: Finished Apply Kernel Variables.
- 439 [ 7.719193] systemd[1]: Finished Create System Users.
- 440 [ 7.731229] systemd[1]: Starting Create Static Device Nodes in /dev...
- 441 [ 7.868212] systemd[1]: Finished Create Static Device Nodes in /dev.
- 442 [ 7.887718] systemd[1]: Starting udev Kernel Device Manager...
- 443 [ 8.107834] systemd[1]: Finished Set the console keyboard layout.
- 444 [ 8.109732] systemd[1]: Reached target Local File Systems (Pre).
- 445 [ 8.126173] systemd[1]: Mounting /tmp...
- 446 [ 8.171291] systemd[1]: Mounted /tmp.
- 447 [ 8.174103] systemd[1]: Reached target Local File Systems.
- 448 [ 8.190197] systemd[1]: Starting Armbian ZRAM config...
- 449 [ 8.216134] systemd[1]: Starting Set console font and keymap...
- 450 [ 8.222326] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
- 451 [ 8.223152] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 452 [ 8.224864] systemd[1]: Started udev Kernel Device Manager.
- 453 [ 8.267276] systemd[1]: Finished udev Coldplug all Devices.
- 454 [ 8.307412] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
- 455 [ 8.358608] systemd[1]: Finished Set console font and keymap.
- 456 [ 8.414358] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
- 457 [ 8.428789] systemd[1]: Starting Raise network interfaces...
- 458 [ 8.910236] zram: Added device: zram0
- 459 [ 8.914138] zram: Added device: zram1
- 460 [ 8.916053] zram: Added device: zram2
- 461 [ 9.371305] zram0: detected capacity change from 0 to 523747328
- 462 [ 9.741396] random: crng init done
- 463 [ 9.741418] random: 7 urandom warning(s) missed due to ratelimiting
- 464 [ 9.760208] systemd[1]: Finished Load/Save Random Seed.
- 465 [ 9.761988] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 466 [ 9.971627] Adding 511468k swap on /dev/zram0. Priority:5 extents:1 across:511468k SSFS
- 467 [ 10.222722] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
- 468 [ 10.243618] cedrus 1c0e000.video-codec: Device registered as /dev/video0
- 469 [ 10.686162] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- 470 [ 10.699591] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- 471 [ 10.826817] zram1: detected capacity change from 0 to 52428800
- 472 [ 11.186154] systemd[1]: Finished Armbian ZRAM config.
- 473 [ 11.227534] systemd[1]: Starting Armbian memory supported logging...
- 474 [ 11.332942] Registered IR keymap rc-empty
- 475 [ 11.333128] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
- 476 [ 11.339613] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
- 477 [ 11.339894] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input13
- 478 [ 11.358052] sunxi-ir 1c21800.ir: initialized sunXi IR driver
- 479 [ 11.562628] bFWReady == _FALSE call reset 8051...
- 480 [ 11.618423] usbcore: registered new interface driver 8188eu
- 481 [ 11.827253] systemd[1]: Found device /dev/ttyS0.
- 482 [ 11.885506] systemd[1]: Finished Raise network interfaces.
- 483 [ 11.890581] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 484 [ 11.905644] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 485 [ 11.906489] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 486 [ 11.906721] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 487 [ 11.906982] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 488 [ 11.907259] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 489 [ 11.907454] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 490 [ 12.063609] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
- 491 [ 12.063686] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
- 492 [ 12.063761] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
- 493 [ 12.063819] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
- 494 [ 12.070505] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
- 495 [ 12.070602] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
- 496 [ 12.089711] lima 1c40000.gpu: bus rate = 300000000
- 497 [ 12.089732] lima 1c40000.gpu: mod rate = 384000000
- 498 [ 12.090629] [drm] Initialized lima 1.2.0 20200215 for 1c40000.gpu on minor 0
- 499 [ 12.796855] axp20x-adc axp20x-adc: DMA mask not set
- 500 [ 12.883567] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 501 [ 12.884747] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 502 [ 12.885652] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 503 [ 12.885947] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 504 [ 12.886327] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 505 [ 12.886691] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 506 [ 12.886959] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 507 [ 13.339725] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- 508 [ 13.398447] systemd[1]: Starting Load/Save RF Kill Switch Status...
- 509 [ 13.471484] 8188eu 1-1:1.0 wlx8c18d9730032: renamed from wlan0
- 510 [ 13.535361] systemd[1]: Started Load/Save RF Kill Switch Status.
- 511 [ 17.367459] systemd[1]: Finished Armbian memory supported logging.
- 512 [ 17.381414] systemd[1]: Starting Journal Service...
- 513 [ 17.749676] systemd[1]: Started Journal Service.
- 514 [ 17.808563] systemd-journald[514]: Received client request to flush runtime journal.
- 515
- 516 ### armbian-release:
- 517
- 518 # PLEASE DO NOT EDIT THIS FILE
- 519 BOARD=pcduino3
- 520 BOARD_NAME="pcDuino3"
- 521 BOARDFAMILY=sun7i
- 522 BUILD_REPOSITORY_URL=git@github.com:armbian/build.git
- 523 BUILD_REPOSITORY_COMMIT=e846ef656-dirty
- 524 DISTRIBUTION_CODENAME=focal
- 525 DISTRIBUTION_STATUS=supported
- 526 VERSION=21.02.3
- 527 LINUXFAMILY=sunxi
- 528 BRANCH=current
- 529 ARCH=arm
- 530 IMAGE_TYPE=stable
- 531 BOARD_TYPE=csc
- 532 INITRD_ARCH=arm
- 533 KERNEL_IMAGE_TYPE=Image
- 534
- 535 ### boot environment:
- 536
- 537 -----BEGIN OPENSSH PRIVATE KEY-----
- 538 b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAABlwAAAAdzc2gtcn
- 539 NhAAAAAwEAAQAAAYEAwaPSLnXY+hKD36KOC3ntCyztDMwRjvRhBgcjOLXAEnchWiudGpTp
- 540 2JDLhTBdR6/04rWZ5BDZSAZp9
- 541 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
- 542
- 543 ### lsusb:
- 544
- 545 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 546 Bus 002 Device 004: ID 0e8f:00a8 GreenAsia Inc.
- 547 Bus 002 Device 003: ID 3938:1032 USB 2.0 Hub
- 548 Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
- 549 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 550 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 551 Bus 001 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
- 552 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 553 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 554
- 555 ### lscpu:
- 556
- 557 Architecture: armv7l
- 558 Byte Order: Little Endian
- 559 CPU(s): 2
- 560 On-line CPU(s) list: 0,1
- 561 Thread(s) per core: 1
- 562 Core(s) per socket: 2
- 563 Socket(s): 1
- 564 Vendor ID: ARM
- 565 Model: 4
- 566 Model name: Cortex-A7
- 567 Stepping: r0p4
- 568 CPU max MHz: 960.0000
- 569 CPU min MHz: 144.0000
- 570 BogoMIPS: 50.52
- 571 Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 572
- 573 ### cpuinfo:
- 574
- 575 processor : 0
- 576 model name : ARMv7 Processor rev 4 (v7l)
- 577 BogoMIPS : 50.52
- 578 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 579 CPU implementer : 0x41
- 580 CPU architecture: 7
- 581 CPU variant : 0x0
- 582 CPU part : 0xc07
- 583 CPU revision : 4
- 584
- 585 processor : 1
- 586 model name : ARMv7 Processor rev 4 (v7l)
- 587 BogoMIPS : 50.52
- 588 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 589 CPU implementer : 0x41
- 590 CPU architecture: 7
- 591 CPU variant : 0x0
- 592 CPU part : 0xc07
- 593 CPU revision : 4
- 594
- 595 Hardware : Allwinner sun7i (A20) Family
- 596 Revision : 0000
- 597 Serial : 165166450742d519
- 598
- 599 ### meminfo:
- 600
- 601 MemTotal: 1022940 kB
- 602 MemFree: 931364 kB
- 603 MemAvailable: 953580 kB
- 604 Buffers: 9368 kB
- 605 Cached: 29348 kB
- 606 SwapCached: 0 kB
- 607 Active: 22700 kB
- 608 Inactive: 22992 kB
- 609 Active(anon): 372 kB
- 610 Inactive(anon): 8508 kB
- 611 Active(file): 22328 kB
- 612 Inactive(file): 14484 kB
- 613 Unevictable: 0 kB
- 614 Mlocked: 0 kB
- 615 HighTotal: 262144 kB
- 616 HighFree: 213448 kB
- 617 LowTotal: 760796 kB
- 618 LowFree: 717916 kB
- 619 SwapTotal: 511468 kB
- 620 SwapFree: 511468 kB
- 621 Dirty: 724 kB
- 622 Writeback: 0 kB
- 623 AnonPages: 6904 kB
- 624 Mapped: 8236 kB
- 625 Shmem: 1976 kB
- 626 KReclaimable: 9296 kB
- 627 Slab: 25116 kB
- 628 SReclaimable: 9296 kB
- 629 SUnreclaim: 15820 kB
- 630 KernelStack: 640 kB
- 631 PageTables: 260 kB
- 632 NFS_Unstable: 0 kB
- 633 Bounce: 0 kB
- 634 WritebackTmp: 0 kB
- 635 CommitLimit: 1022936 kB
- 636 Committed_AS: 12424 kB
- 637 VmallocTotal: 245760 kB
- 638 VmallocUsed: 11408 kB
- 639 VmallocChunk: 0 kB
- 640 Percpu: 312 kB
- 641 CmaTotal: 98304 kB
- 642 CmaFree: 96888 kB
- 643
- 644 ### virtual memory:
- 645
- 646 vm.admin_reserve_kbytes = 8192
- 647 vm.block_dump = 0
- 648 vm.compaction_proactiveness = 20
- 649 vm.compact_unevictable_allowed = 1
- 650 vm.dirty_background_bytes = 0
- 651 vm.dirty_background_ratio = 10
- 652 vm.dirty_bytes = 0
- 653 vm.dirty_expire_centisecs = 3000
- 654 vm.dirty_ratio = 20
- 655 vm.dirtytime_expire_seconds = 43200
- 656 vm.dirty_writeback_centisecs = 500
- 657 vm.extfrag_threshold = 500
- 658 vm.highmem_is_dirtyable = 0
- 659 vm.laptop_mode = 0
- 660 vm.legacy_va_layout = 0
- 661 vm.lowmem_reserve_ratio = 32 0 0
- 662 vm.max_map_count = 65530
- 663 vm.min_free_kbytes = 3460
- 664 vm.mmap_min_addr = 32768
- 665 vm.mmap_rnd_bits = 8
- 666 vm.oom_dump_tasks = 1
- 667 vm.oom_kill_allocating_task = 0
- 668 vm.overcommit_kbytes = 0
- 669 vm.overcommit_memory = 0
- 670 vm.overcommit_ratio = 50
- 671 vm.page-cluster = 0
- 672 vm.page_lock_unfairness = 5
- 673 vm.panic_on_oom = 0
- 674 vm.percpu_pagelist_fraction = 0
- 675 vm.stat_interval = 1
- 676 vm.swappiness = 100
- 677 vm.user_reserve_kbytes = 31450
- 678 vm.vfs_cache_pressure = 100
- 679 vm.watermark_boost_factor = 15000
- 680 vm.watermark_scale_factor = 10
- 681
- 682 ### ip addr:
- 683
- 684 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
- 685 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- 686 inet XXX.XXX.0.1/8 scope host lo
- 687 valid_lft forever preferred_lft forever
- 688 inet6 ::1/128 scope host
- 689 valid_lft forever preferred_lft forever
- 690 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
- 691 link/ether 02:45:07:42:d5:19 brd ff:ff:ff:ff:ff:ff
- 692 3: wlx8c18d9730032: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
- 693 link/ether 8c:18:d9:73:00:32 brd ff:ff:ff:ff:ff:ff
- 694
- 695 ### partitions:
- 696
- 697 major minor #blocks name
- 698
- 699 179 0 7761920 mmcblk0
- 700 179 1 7602576 mmcblk0p1
- 701 254 0 511472 zram0
- 702 254 1 51200 zram1
- 703
- 704 ### df:
- 705
- 706 udev 446M 0 446M 0% /dev
- 707 tmpfs 100M 2.0M 98M 2% /run
- 708 /dev/mmcblk0p1 7.1G 1011M 6.0G 15% /
- 709 tmpfs 500M 0 500M 0% /dev/shm
- 710 tmpfs 5.0M 4.0K 5.0M 1% /run/lock
- 711 tmpfs 500M 0 500M 0% /sys/fs/cgroup
- 712 tmpfs 500M 0 500M 0% /tmp
- 713 /dev/zram1 49M 740K 45M 2% /var/log
- 714
- 715 ### lsblk:
- 716
- 717 NAME FSTYPE SIZE MOUNTPOINT UUID
- 718 mmcblk0 7.4G
- 719 └─mmcblk0p1 ext4 7.3G / 091febf7-a8e0-4243-8264-8902b803f507
- 720 zram1 50M /var/log
- 721
- 722 ### zramctl:
- 723
- 724 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
- 725 /dev/zram1 zstd 50M 68K 698B 52K 2 /var/log
- 726 /dev/zram0 lzo-rle 499.5M 4K 73B 4K 2 [SWAP]
- 727
- 728 ### mtab:
- 729
- 730 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
- 731 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
- 732 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
- 733
- 734 ### mmc0:aaaa info:
- 735
- 736 manfid: 0x000003
- 737 cid: 035344534c303847800133154900f413
- 738 fwrev: 0x0
- 739 rca: 0xaaaa
- 740 csd: 400e00325b5900003b377f800a4040af
- 741 ocr: 0x00200000
- 742 type: SD
- 743 date: 04/2015
- 744 hwrev: 0x8
- 745 dsr: 0x404
- 746 serial: 0x01331549
- 747 erase_size: 512
- 748 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SL08G MODALIAS=mmc:block
- 749 ssr: 00000000030000000400900014050a00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
- 750 scr: 0235800100000000
- 751 oemid: 0x5344
- 752 preferred_erase_size: 4194304
- 753 name: SL08G
- 754
- 755 ### Boot system health:
- 756
- 757 Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St.
- 758 08:17:22: 960MHz 1.67 81% 43% 36% 0% 1% 0% 38.4°C 37.5°C 5.42V 0/6
- 759 08:17:23: 960MHz 1.67 99% 45% 45% 0% 6% 1% 38.2°C 37.4°C 5.42V 0/6
- 760 08:17:26: 960MHz 1.67 88% 27% 56% 1% 0% 2% 38.4°C 37.2°C 5.42V 0/6
- 761 08:17:27: 960MHz 2.26 91% 28% 61% 1% 0% 0% 38.4°C 37.1°C 5.45V 0/6
- 762 08:17:28: 960MHz 2.26 66% 15% 49% 1% 0% 0% 38.5°C 36.9°C 5.40V 0/6
- 763
- 764 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 765
- 766 ### Activated Armbian ramlog partition with zstd compression
- 767
- 768 ### Activated 1 lzo-rle zram swap devices with 499 MB each
- 769
- 770 ### Activated Armbian ramlog partition with zstd compression
- 771
- 772 Tue 09 Mar 2021 08:18:35 AM UTC | pcDuino3 | 21.02.3 | armhf | armv7l | 5.10.21-sunxi
- 773
- 774 ### dmesg:
- 775
- 776 [ 0.000000] Booting Linux on physical CPU 0x0
- 777 [ 0.000000] Linux version 5.10.21-sunxi (root@hirsute) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.02.3 SMP Mon Mar 8 00:28:04 UTC 2021
- 778 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d
- 779 [ 0.000000] CPU: div instructions available: patching division code
- 780 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- 781 [ 0.000000] OF: fdt: Machine model: LinkSprite pcDuino3
- 782 [ 0.000000] Memory policy: Data cache writealloc
- 783 [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB
- 784 [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool
- 785 [ 0.000000] Zone ranges:
- 786 [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
- 787 [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff]
- 788 [ 0.000000] Movable zone start for each node
- 789 [ 0.000000] Early memory node ranges
- 790 [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- 791 [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
- 792 [ 0.000000] On node 0 totalpages: 262144
- 793 [ 0.000000] Normal zone: 1728 pages used for memmap
- 794 [ 0.000000] Normal zone: 0 pages reserved
- 795 [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
- 796 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
- 797 [ 0.000000] psci: probing for conduit method from DT.
- 798 [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- 799 [ 0.000000] percpu: Embedded 20 pages/cpu s50764 r8192 d22964 u81920
- 800 [ 0.000000] pcpu-alloc: s50764 r8192 d22964 u81920 alloc=20*4096
- 801 [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- 802 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
- 803 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=ed8d89fc-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
- 804 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- 805 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- 806 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- 807 [ 0.000000] Memory: 912356K/1048576K available (9216K kernel code, 1458K rwdata, 3220K rodata, 1024K init, 331K bss, 37916K reserved, 98304K cma-reserved, 262144K highmem)
- 808 [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x1d/0x29c with crng_init=0
- 809 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- 810 [ 0.000000] ftrace: allocating 41988 entries in 83 pages
- 811 [ 0.000000] ftrace: allocated 83 pages with 4 groups
- 812 [ 0.000000] rcu: Hierarchical RCU implementation.
- 813 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
- 814 [ 0.000000] Rude variant of Tasks RCU enabled.
- 815 [ 0.000000] Tracing variant of Tasks RCU enabled.
- 816 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- 817 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- 818 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- 819 [ 0.000000] GIC: Using split EOI/Deactivate mode
- 820 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- 821 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- 822 [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- 823 [ 0.000020] Switching to timer-based delay loop, resolution 41ns
- 824 [ 0.000546] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- 825 [ 0.000882] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
- 826 [ 0.001226] Console: colour dummy device 80x30
- 827 [ 0.001300] printk: console [tty1] enabled
- 828 [ 0.001364] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- 829 [ 0.001384] pid_max: default: 32768 minimum: 301
- 830 [ 0.001634] LSM: Security Framework initializing
- 831 [ 0.001704] Yama: becoming mindful.
- 832 [ 0.001916] AppArmor: AppArmor initialized
- 833 [ 0.002019] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- 834 [ 0.002036] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- 835 [ 0.003201] CPU: Testing write buffer coherency: ok
- 836 [ 0.003659] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- 837 [ 0.004636] Setting up static identity map for 0x40100000 - 0x40100054
- 838 [ 0.004791] rcu: Hierarchical SRCU implementation.
- 839 [ 0.006140] smp: Bringing up secondary CPUs ...
- 840 [ 0.017092] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- 841 [ 0.017271] smp: Brought up 1 node, 2 CPUs
- 842 [ 0.017287] SMP: Total of 2 processors activated (96.00 BogoMIPS).
- 843 [ 0.017294] CPU: All CPU(s) started in HYP mode.
- 844 [ 0.017298] CPU: Virtualization extensions available.
- 845 [ 0.018230] allocated 1048576 bytes of page_ext
- 846 [ 0.018943] devtmpfs: initialized
- 847 [ 0.029053] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- 848 [ 0.029360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- 849 [ 0.029402] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- 850 [ 0.032233] pinctrl core: initialized pinctrl subsystem
- 851 [ 0.033674] NET: Registered protocol family 16
- 852 [ 0.035651] DMA: preallocated 256 KiB pool for atomic coherent allocations
- 853 [ 0.036381] audit: initializing netlink subsys (disabled)
- 854 [ 0.036758] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
- 855 [ 0.037472] thermal_sys: Registered thermal governor 'fair_share'
- 856 [ 0.037482] thermal_sys: Registered thermal governor 'bang_bang'
- 857 [ 0.037490] thermal_sys: Registered thermal governor 'step_wise'
- 858 [ 0.037785] cpuidle: using governor ladder
- 859 [ 0.037815] cpuidle: using governor menu
- 860 [ 0.038392] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- 861 [ 0.038400] hw-breakpoint: maximum watchpoint size is 8 bytes.
- 862 [ 0.066721] cryptd: max_cpu_qlen set to 1000
- 863 [ 0.137596] raid6: neonx8 gen() 703 MB/s
- 864 [ 0.205702] raid6: neonx8 xor() 521 MB/s
- 865 [ 0.273830] raid6: neonx4 gen() 751 MB/s
- 866 [ 0.341970] raid6: neonx4 xor() 571 MB/s
- 867 [ 0.410123] raid6: neonx2 gen() 827 MB/s
- 868 [ 0.478223] raid6: neonx2 xor() 590 MB/s
- 869 [ 0.546385] raid6: neonx1 gen() 737 MB/s
- 870 [ 0.614510] raid6: neonx1 xor() 511 MB/s
- 871 [ 0.682698] raid6: int32x8 gen() 274 MB/s
- 872 [ 0.750793] raid6: int32x8 xor() 162 MB/s
- 873 [ 0.818906] raid6: int32x4 gen() 320 MB/s
- 874 [ 0.887080] raid6: int32x4 xor() 186 MB/s
- 875 [ 0.955170] raid6: int32x2 gen() 361 MB/s
- 876 [ 1.023295] raid6: int32x2 xor() 192 MB/s
- 877 [ 1.091437] raid6: int32x1 gen() 363 MB/s
- 878 [ 1.159578] raid6: int32x1 xor() 173 MB/s
- 879 [ 1.159585] raid6: using algorithm neonx2 gen() 827 MB/s
- 880 [ 1.159590] raid6: .... xor() 590 MB/s, rmw enabled
- 881 [ 1.159597] raid6: using neon recovery algorithm
- 882 [ 1.161376] iommu: Default domain type: Translated
- 883 [ 1.161827] SCSI subsystem initialized
- 884 [ 1.162173] libata version 3.00 loaded.
- 885 [ 1.162460] usbcore: registered new interface driver usbfs
- 886 [ 1.162513] usbcore: registered new interface driver hub
- 887 [ 1.162564] usbcore: registered new device driver usb
- 888 [ 1.162678] mc: Linux media interface: v0.10
- 889 [ 1.162729] videodev: Linux video capture interface: v2.00
- 890 [ 1.162882] pps_core: LinuxPPS API ver. 1 registered
- 891 [ 1.162892] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- 892 [ 1.162913] PTP clock support registered
- 893 [ 1.163447] Advanced Linux Sound Architecture Driver Initialized.
- 894 [ 1.164377] NetLabel: Initializing
- 895 [ 1.164391] NetLabel: domain hash size = 128
- 896 [ 1.164397] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- 897 [ 1.164496] NetLabel: unlabeled traffic allowed by default
- 898 [ 1.165348] clocksource: Switched to clocksource arch_sys_counter
- 899 [ 1.289647] VFS: Disk quotas dquot_6.6.0
- 900 [ 1.289760] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- 901 [ 1.290458] AppArmor: AppArmor Filesystem Enabled
- 902 [ 1.299940] NET: Registered protocol family 2
- 903 [ 1.300897] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- 904 [ 1.300983] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- 905 [ 1.301097] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- 906 [ 1.301223] TCP: Hash tables configured (established 8192 bind 8192)
- 907 [ 1.301496] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- 908 [ 1.301580] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- 909 [ 1.301932] NET: Registered protocol family 1
- 910 [ 1.302651] Trying to unpack rootfs image as initramfs...
- 911 [ 2.146374] Freeing initrd memory: 11256K
- 912 [ 2.147155] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- 913 [ 2.147524] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- 914 [ 2.148959] Initialise system trusted keyrings
- 915 [ 2.149025] Key type blacklist registered
- 916 [ 2.149431] workingset: timestamp_bits=14 max_order=18 bucket_order=4
- 917 [ 2.155334] zbud: loaded
- 918 [ 2.156984] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- 919 [ 2.158251] fuse: init (API version 7.32)
- 920 [ 2.161308] integrity: Platform Keyring initialized
- 921 [ 2.281595] xor: measuring software checksum speed
- 922 [ 2.290031] arm4regs : 1175 MB/sec
- 923 [ 2.302122] 8regs : 814 MB/sec
- 924 [ 2.314898] 32regs : 770 MB/sec
- 925 [ 2.323143] neon : 1197 MB/sec
- 926 [ 2.323151] xor: using function: neon (1197 MB/sec)
- 927 [ 2.323167] Key type asymmetric registered
- 928 [ 2.323176] Asymmetric key parser 'x509' registered
- 929 [ 2.323372] bounce: pool size: 64 pages
- 930 [ 2.323461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- 931 [ 2.323757] io scheduler mq-deadline registered
- 932 [ 2.323769] io scheduler kyber registered
- 933 [ 2.324089] io scheduler bfq registered
- 934 [ 2.329311] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- 935 [ 2.340665] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- 936 [ 2.343733] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
- 937 [ 2.344452] printk: console [ttyS0] disabled
- 938 [ 2.344559] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 55, base_baud = 1500000) is a 16550A
- 939 [ 2.344835] printk: console [ttyS0] enabled
- 940 [ 2.353850] brd: module loaded
- 941 [ 2.362567] loop: module loaded
- 942 [ 2.363549] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
- 943 [ 2.363778] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
- 944 [ 2.365542] libphy: Fixed MDIO Bus: probed
- 945 [ 2.366269] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- 946 [ 2.366470] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
- 947 [ 2.366483] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
- 948 [ 2.366602] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
- 949 [ 2.366615] sun7i-dwmac 1c50000.ethernet: no reset control found
- 950 [ 2.366647] sun7i-dwmac 1c50000.ethernet: no regulator found
- 951 [ 2.367009] sun7i-dwmac 1c50000.ethernet: Version ID not available
- 952 [ 2.367027] sun7i-dwmac 1c50000.ethernet: DWMAC1000
- 953 [ 2.367038] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
- 954 [ 2.367048] sun7i-dwmac 1c50000.ethernet: Normal descriptors
- 955 [ 2.367056] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
- 956 [ 2.367699] libphy: stmmac: probed
- 957 [ 2.379825] realtek: module verification failed: signature and/or required key missing - tainting kernel
- 958 [ 2.390519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- 959 [ 2.390563] ehci-platform: EHCI generic platform driver
- 960 [ 2.391057] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- 961 [ 2.391085] ohci-platform: OHCI generic platform driver
- 962 [ 2.391913] usbcore: registered new interface driver usb-storage
- 963 [ 2.392988] sunxi-rtc 1c20d00.rtc: registered as rtc0
- 964 [ 2.393047] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T01:29:52 UTC (5392)
- 965 [ 2.393214] i2c /dev entries driver
- 966 [ 2.394551] axp20x-i2c 0-0034: AXP20x variant AXP209 found
- 967 [ 2.401727] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
- 968 [ 2.410777] vdd-rtc: supplied by regulator-dummy
- 969 [ 2.411962] avcc: supplied by regulator-dummy
- 970 [ 2.412677] ldo3: supplied by regulator-dummy
- 971 [ 2.412968] ldo4: supplied by regulator-dummy
- 972 [ 2.414068] ldo5: supplied by regulator-dummy
- 973 [ 2.414809] vdd-cpu: supplied by regulator-dummy
- 974 [ 2.415554] vdd-int-pll: supplied by regulator-dummy
- 975 [ 2.418761] random: fast init done
- 976 [ 2.419072] axp20x-i2c 0-0034: Backup (RTC) battery charging is disabled
- 977 [ 2.419220] axp20x-i2c 0-0034: AXP20X driver loaded
- 978 [ 2.421239] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- 979 [ 2.422509] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- 980 [ 2.422650] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
- 981 [ 2.423793] ledtrig-cpu: registered to indicate activity on CPUs
- 982 [ 2.424097] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- 983 [ 2.424187] sun4i-ss 1c15000.crypto-engine: Die ID 0
- 984 [ 2.426582] hid: raw HID events driver (C) Jiri Kosina
- 985 [ 2.426801] usbcore: registered new interface driver usbhid
- 986 [ 2.426809] usbhid: USB HID core driver
- 987 [ 2.429606] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
- 988 [ 2.433625] Initializing XFRM netlink socket
- 989 [ 2.434280] NET: Registered protocol family 10
- 990 [ 2.449876] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
- 991 [ 2.480022] Segment Routing with IPv6
- 992 [ 2.480176] NET: Registered protocol family 17
- 993 [ 2.480221] NET: Registered protocol family 15
- 994 [ 2.480319] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- 995 [ 2.480514] 8021q: 802.1Q VLAN Support v1.8
- 996 [ 2.480599] Key type dns_resolver registered
- 997 [ 2.481104] Registering SWP/SWPB emulation handler
- 998 [ 2.481571] registered taskstats version 1
- 999 [ 2.481589] Loading compiled-in X.509 certificates
- 1000 [ 2.489242] Loaded X.509 cert 'Build time autogenerated kernel key: b55cc50c0b5861053e31ca5c6be0f880e49735e6'
- 1001 [ 2.492199] zswap: loaded using pool zstd/z3fold
- 1002 [ 2.493233] Key type ._fscrypt registered
- 1003 [ 2.493248] Key type .fscrypt registered
- 1004 [ 2.493254] Key type fscrypt-provisioning registered
- 1005 [ 2.499734] Btrfs loaded, crc32c=crc32c-generic
- 1006 [ 2.502984] mmc0: host does not support reading read-only switch, assuming write-enable
- 1007 [ 2.506626] mmc0: new high speed SDHC card at address aaaa
- 1008 [ 2.508508] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
- 1009 [ 2.512359] mmcblk0: p1
- 1010 [ 2.514152] Key type encrypted registered
- 1011 [ 2.514182] AppArmor: AppArmor sha1 policy hashing enabled
- 1012 [ 2.533080] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
- 1013 [ 2.533462] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
- 1014 [ 2.589387] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- 1015 [ 2.589403] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
- 1016 [ 2.589469] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- 1017 [ 2.589486] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
- 1018 [ 2.590718] scsi host0: ahci-sunxi
- 1019 [ 2.591161] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 43
- 1020 [ 2.592139] ehci-platform 1c14000.usb: EHCI Host Controller
- 1021 [ 2.592178] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
- 1022 [ 2.592684] ehci-platform 1c14000.usb: irq 40, io mem 0x01c14000
- 1023 [ 2.605377] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- 1024 [ 2.605728] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 1025 [ 2.605741] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1026 [ 2.605750] usb usb1: Product: EHCI Host Controller
- 1027 [ 2.605758] usb usb1: Manufacturer: Linux 5.10.21-sunxi ehci_hcd
- 1028 [ 2.605766] usb usb1: SerialNumber: 1c14000.usb
- 1029 [ 2.606527] hub 1-0:1.0: USB hub found
- 1030 [ 2.606582] hub 1-0:1.0: 1 port detected
- 1031 [ 2.607885] ehci-platform 1c1c000.usb: EHCI Host Controller
- 1032 [ 2.607935] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- 1033 [ 2.608322] ehci-platform 1c1c000.usb: irq 44, io mem 0x01c1c000
- 1034 [ 2.621381] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- 1035 [ 2.621753] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 1036 [ 2.621766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1037 [ 2.621775] usb usb2: Product: EHCI Host Controller
- 1038 [ 2.621783] usb usb2: Manufacturer: Linux 5.10.21-sunxi ehci_hcd
- 1039 [ 2.621791] usb usb2: SerialNumber: 1c1c000.usb
- 1040 [ 2.622503] hub 2-0:1.0: USB hub found
- 1041 [ 2.622579] hub 2-0:1.0: 1 port detected
- 1042 [ 2.623858] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- 1043 [ 2.623894] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
- 1044 [ 2.624254] ohci-platform 1c14400.usb: irq 41, io mem 0x01c14400
- 1045 [ 2.685595] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
- 1046 [ 2.685610] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1047 [ 2.685619] usb usb3: Product: Generic Platform OHCI controller
- 1048 [ 2.685627] usb usb3: Manufacturer: Linux 5.10.21-sunxi ohci_hcd
- 1049 [ 2.685635] usb usb3: SerialNumber: 1c14400.usb
- 1050 [ 2.686364] hub 3-0:1.0: USB hub found
- 1051 [ 2.686424] hub 3-0:1.0: 1 port detected
- 1052 [ 2.687688] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- 1053 [ 2.687723] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
- 1054 [ 2.688078] ohci-platform 1c1c400.usb: irq 45, io mem 0x01c1c400
- 1055 [ 2.749599] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
- 1056 [ 2.749614] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1057 [ 2.749623] usb usb4: Product: Generic Platform OHCI controller
- 1058 [ 2.749631] usb usb4: Manufacturer: Linux 5.10.21-sunxi ohci_hcd
- 1059 [ 2.749638] usb usb4: SerialNumber: 1c1c400.usb
- 1060 [ 2.750375] hub 4-0:1.0: USB hub found
- 1061 [ 2.750433] hub 4-0:1.0: 1 port detected
- 1062 [ 2.751531] of_cfs_init
- 1063 [ 2.751697] of_cfs_init: OK
- 1064 [ 2.751908] ALSA device list:
- 1065 [ 2.751921] #0: sun4i-codec
- 1066 [ 2.907796] ata1: SATA link down (SStatus 0 SControl 300)
- 1067 [ 2.912220] Freeing unused kernel memory: 1024K
- 1068 [ 2.912496] Run /init as init process
- 1069 [ 2.912507] with arguments:
- 1070 [ 2.912514] /init
- 1071 [ 2.912519] with environment:
- 1072 [ 2.912525] HOME=/
- 1073 [ 2.912531] TERM=linux
- 1074 [ 2.912536] ubootpart=ed8d89fc-01
- 1075 [ 2.912542] ubootsource=mmc
- 1076 [ 2.912548] sunxi_ve_mem_reserve=0
- 1077 [ 2.912553] sunxi_g2d_mem_reserve=0
- 1078 [ 2.912558] sunxi_fb_mem_reserve=16
- 1079 [ 2.912564] cgroup_enable=memory
- 1080 [ 2.941483] usb 1-1: new high-speed USB device number 2 using ehci-platform
- 1081 [ 2.957468] usb 2-1: new high-speed USB device number 2 using ehci-platform
- 1082 [ 3.102515] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
- 1083 [ 3.102537] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- 1084 [ 3.102547] usb 1-1: Product: 802.11n NIC
- 1085 [ 3.102554] usb 1-1: Manufacturer: Realtek
- 1086 [ 3.102562] usb 1-1: SerialNumber: 8C18D9730032
- 1087 [ 3.114650] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- 1088 [ 3.114671] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- 1089 [ 3.114681] usb 2-1: Product: USB 2.0 Hub
- 1090 [ 3.117517] hub 2-1:1.0: USB hub found
- 1091 [ 3.118799] hub 2-1:1.0: 4 ports detected
- 1092 [ 3.525439] usb 2-1.1: new full-speed USB device number 3 using ehci-platform
- 1093 [ 3.638198] input: gpio-keys as /devices/platform/gpio-keys/input/input1
- 1094 [ 3.756528] usb 2-1.1: New USB device found, idVendor=3938, idProduct=1032, bcdDevice= 1.08
- 1095 [ 3.756551] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 1096 [ 3.756559] usb 2-1.1: Product: 2.4G RF Keyboard & Mouse
- 1097 [ 3.756567] usb 2-1.1: Manufacturer: MOSART Semi.
- 1098 [ 3.764907] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:3938:1032.0001/input/input2
- 1099 [ 3.822134] hid-generic 0003:3938:1032.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input0
- 1100 [ 3.829203] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input3
- 1101 [ 3.829696] input: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input4
- 1102 [ 3.879245] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator
- 1103 [ 3.880753] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- 1104 [ 3.880791] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
- 1105 [ 3.880908] phy id_det change to device
- 1106 [ 3.889787] input: MOSART Semi. 2.4G RF Keyboard & Mouse System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input5
- 1107 [ 3.890037] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input7
- 1108 [ 3.890765] hid-generic 0003:3938:1032.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input1
- 1109 [ 3.891996] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 1110 [ 3.892017] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1111 [ 3.892027] usb usb5: Product: MUSB HDRC host driver
- 1112 [ 3.892035] usb usb5: Manufacturer: Linux 5.10.21-sunxi musb-hcd
- 1113 [ 3.892043] usb usb5: SerialNumber: musb-hdrc.1.auto
- 1114 [ 3.894897] hub 5-0:1.0: USB hub found
- 1115 [ 3.894982] hub 5-0:1.0: 1 port detected
- 1116 [ 4.074895] sun5i-a13-gpadc-iio: Failed to locate of_node [id: 0]
- 1117 [ 4.089763] usb 2-1.2: new low-speed USB device number 4 using ehci-platform
- 1118 [ 4.100353] axp20x-gpio axp20x-gpio: DMA mask not set
- 1119 [ 4.102001] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
- 1120 [ 4.337819] usb 2-1.2: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11
- 1121 [ 4.337844] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 1122 [ 4.337853] usb 2-1.2: Product: 2.4G RX
- 1123 [ 4.337861] usb 2-1.2: Manufacturer: DaKai
- 1124 [ 4.346551] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:0E8F:00A8.0003/input/input8
- 1125 [ 4.405753] hid-generic 0003:0E8F:00A8.0003: input,hidraw2: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input0
- 1126 [ 4.416079] input: DaKai 2.4G RX Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input9
- 1127 [ 4.416302] input: DaKai 2.4G RX System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input10
- 1128 [ 4.473710] input: DaKai 2.4G RX Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input11
- 1129 [ 4.473888] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input12
- 1130 [ 4.474409] hid-generic 0003:0E8F:00A8.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input1
- 1131 [ 5.000178] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- 1132 [ 5.742460] systemd[1]: System time before build time, advancing clock.
- 1133 [ 5.776448] systemd[1]: Inserted module 'autofs4'
- 1134 [ 5.853548] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- 1135 [ 5.854345] systemd[1]: Detected architecture arm.
- 1136 [ 5.899043] systemd[1]: Set hostname to <pcduino3>.
- 1137 [ 6.490842] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
- 1138 [ 6.956751] random: systemd: uninitialized urandom read (16 bytes read)
- 1139 [ 6.963512] systemd[1]: Created slice system-modprobe.slice.
- 1140 [ 6.964354] random: systemd: uninitialized urandom read (16 bytes read)
- 1141 [ 6.966644] systemd[1]: Created slice system-serial\x2dgetty.slice.
- 1142 [ 6.967255] random: systemd: uninitialized urandom read (16 bytes read)
- 1143 [ 6.969091] systemd[1]: Created slice User and Session Slice.
- 1144 [ 6.969775] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1145 [ 6.970409] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- 1146 [ 6.972401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- 1147 [ 6.973176] systemd[1]: Reached target Local Encrypted Volumes.
- 1148 [ 6.974113] systemd[1]: Reached target Remote File Systems.
- 1149 [ 6.974577] systemd[1]: Reached target Slices.
- 1150 [ 6.975062] systemd[1]: Reached target Swap.
- 1151 [ 6.975504] systemd[1]: Reached target System Time Set.
- 1152 [ 6.976857] systemd[1]: Listening on Syslog Socket.
- 1153 [ 6.978386] systemd[1]: Listening on fsck to fsckd communication Socket.
- 1154 [ 6.979414] systemd[1]: Listening on initctl Compatibility Named Pipe.
- 1155 [ 6.981540] systemd[1]: Listening on Journal Audit Socket.
- 1156 [ 6.982949] systemd[1]: Listening on Journal Socket (/dev/log).
- 1157 [ 6.984488] systemd[1]: Listening on Journal Socket.
- 1158 [ 6.986229] systemd[1]: Listening on udev Control Socket.
- 1159 [ 6.987468] systemd[1]: Listening on udev Kernel Socket.
- 1160 [ 6.988823] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1161 [ 6.996828] systemd[1]: Mounting POSIX Message Queue File System...
- 1162 [ 7.007640] systemd[1]: Mounting Kernel Debug File System...
- 1163 [ 7.018627] systemd[1]: Mounting Kernel Trace File System...
- 1164 [ 7.033164] systemd[1]: Starting Restore / save the current clock...
- 1165 [ 7.051216] systemd[1]: Starting Set the console keyboard layout...
- 1166 [ 7.067126] systemd[1]: Starting Create list of static device nodes for the current kernel...
- 1167 [ 7.068256] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
- 1168 [ 7.083774] systemd[1]: Started Nameserver information manager.
- 1169 [ 7.085876] systemd[1]: Reached target Network (Pre).
- 1170 [ 7.090392] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1171 [ 7.090932] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- 1172 [ 7.119759] systemd[1]: Starting Load Kernel Modules...
- 1173 [ 7.138934] systemd[1]: Starting Remount Root and Kernel File Systems...
- 1174 [ 7.175223] systemd[1]: Starting udev Coldplug all Devices...
- 1175 [ 7.210630] systemd[1]: Mounted POSIX Message Queue File System.
- 1176 [ 7.212777] systemd[1]: Mounted Kernel Debug File System.
- 1177 [ 7.224467] systemd[1]: Mounted Kernel Trace File System.
- 1178 [ 7.241739] systemd[1]: Finished Restore / save the current clock.
- 1179 [ 7.252647] systemd[1]: Finished Create list of static device nodes for the current kernel.
- 1180 [ 7.287584] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
- 1181 [ 7.288263] systemd[1]: Finished Load Kernel Modules.
- 1182 [ 7.305993] systemd[1]: Finished Remount Root and Kernel File Systems.
- 1183 [ 7.318098] systemd[1]: Mounting FUSE Control File System...
- 1184 [ 7.335956] systemd[1]: Mounting Kernel Configuration File System...
- 1185 [ 7.339617] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1186 [ 7.340277] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1187 [ 7.363740] systemd[1]: Starting Load/Save Random Seed...
- 1188 [ 7.385217] systemd[1]: Starting Apply Kernel Variables...
- 1189 [ 7.402708] systemd[1]: Starting Create System Users...
- 1190 [ 7.425233] systemd[1]: Mounted FUSE Control File System.
- 1191 [ 7.438098] systemd[1]: Mounted Kernel Configuration File System.
- 1192 [ 7.552369] systemd[1]: Finished Create System Users.
- 1193 [ 7.570991] systemd[1]: Starting Create Static Device Nodes in /dev...
- 1194 [ 7.596959] systemd[1]: Finished Apply Kernel Variables.
- 1195 [ 7.729659] systemd[1]: Finished Create Static Device Nodes in /dev.
- 1196 [ 7.741253] systemd[1]: Starting udev Kernel Device Manager...
- 1197 [ 7.911628] systemd[1]: Finished Set the console keyboard layout.
- 1198 [ 7.913528] systemd[1]: Reached target Local File Systems (Pre).
- 1199 [ 7.928325] systemd[1]: Mounting /tmp...
- 1200 [ 7.964299] systemd[1]: Mounted /tmp.
- 1201 [ 7.966147] systemd[1]: Reached target Local File Systems.
- 1202 [ 7.975808] systemd[1]: Starting Armbian ZRAM config...
- 1203 [ 7.992094] systemd[1]: Starting Set console font and keymap...
- 1204 [ 7.996429] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
- 1205 [ 7.998074] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1206 [ 8.004841] systemd[1]: Started udev Kernel Device Manager.
- 1207 [ 8.137258] systemd[1]: Finished Set console font and keymap.
- 1208 [ 8.467749] systemd[1]: Finished udev Coldplug all Devices.
- 1209 [ 8.488769] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
- 1210 [ 8.558984] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
- 1211 [ 8.572164] systemd[1]: Starting Raise network interfaces...
- 1212 [ 8.886325] zram: Added device: zram0
- 1213 [ 8.890248] zram: Added device: zram1
- 1214 [ 8.894523] zram: Added device: zram2
- 1215 [ 9.364082] zram0: detected capacity change from 0 to 523747328
- 1216 [ 9.801492] random: crng init done
- 1217 [ 9.801516] random: 7 urandom warning(s) missed due to ratelimiting
- 1218 [ 9.828666] systemd[1]: Finished Load/Save Random Seed.
- 1219 [ 9.830509] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1220 [ 9.989514] Adding 511468k swap on /dev/zram0. Priority:5 extents:1 across:511468k SSFS
- 1221 [ 10.120087] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
- 1222 [ 10.156137] cedrus 1c0e000.video-codec: Device registered as /dev/video0
- 1223 [ 10.858228] zram1: detected capacity change from 0 to 52428800
- 1224 [ 11.016321] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- 1225 [ 11.043689] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- 1226 [ 11.216321] systemd[1]: Finished Raise network interfaces.
- 1227 [ 11.286929] systemd[1]: Finished Armbian ZRAM config.
- 1228 [ 11.307759] Registered IR keymap rc-empty
- 1229 [ 11.307934] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
- 1230 [ 11.317618] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
- 1231 [ 11.317907] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input13
- 1232 [ 11.321558] sunxi-ir 1c21800.ir: initialized sunXi IR driver
- 1233 [ 11.331067] systemd[1]: Starting Armbian memory supported logging...
- 1234 [ 11.601650] bFWReady == _FALSE call reset 8051...
- 1235 [ 11.646123] usbcore: registered new interface driver 8188eu
- 1236 [ 11.824794] systemd[1]: Found device /dev/ttyS0.
- 1237 [ 11.837948] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1238 [ 11.839177] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1239 [ 11.846289] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1240 [ 11.846569] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1241 [ 11.846857] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1242 [ 11.847139] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1243 [ 11.847324] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1244 [ 12.029876] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
- 1245 [ 12.029956] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
- 1246 [ 12.030037] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
- 1247 [ 12.030095] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
- 1248 [ 12.053713] lima 1c40000.gpu: bus rate = 300000000
- 1249 [ 12.053734] lima 1c40000.gpu: mod rate = 384000000
- 1250 [ 12.054415] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
- 1251 [ 12.054487] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
- 1252 [ 12.057542] [drm] Initialized lima 1.2.0 20200215 for 1c40000.gpu on minor 0
- 1253 [ 12.482331] axp20x-adc axp20x-adc: DMA mask not set
- 1254 [ 12.813601] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1255 [ 12.814746] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1256 [ 12.815443] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1257 [ 12.815706] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1258 [ 12.816039] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1259 [ 12.816381] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1260 [ 12.816621] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1261 [ 13.239720] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- 1262 [ 13.304586] systemd[1]: Starting Load/Save RF Kill Switch Status...
- 1263 [ 13.387587] 8188eu 1-1:1.0 wlx8c18d9730032: renamed from wlan0
- 1264 [ 13.433166] systemd[1]: Started Load/Save RF Kill Switch Status.
- 1265 [ 17.420924] systemd[1]: Finished Armbian memory supported logging.
- 1266 [ 17.435463] systemd[1]: Starting Journal Service...
- 1267 [ 17.823810] systemd[1]: Started Journal Service.
- 1268 [ 17.898645] systemd-journald[514]: Received client request to flush runtime journal.
- 1269
- 1270 ### armbian-release:
- 1271
- 1272 # PLEASE DO NOT EDIT THIS FILE
- 1273 BOARD=pcduino3
- 1274 BOARD_NAME="pcDuino3"
- 1275 BOARDFAMILY=sun7i
- 1276 BUILD_REPOSITORY_URL=git@github.com:armbian/build.git
- 1277 BUILD_REPOSITORY_COMMIT=e846ef656-dirty
- 1278 DISTRIBUTION_CODENAME=focal
- 1279 DISTRIBUTION_STATUS=supported
- 1280 VERSION=21.02.3
- 1281 LINUXFAMILY=sunxi
- 1282 BRANCH=current
- 1283 ARCH=arm
- 1284 IMAGE_TYPE=stable
- 1285 BOARD_TYPE=csc
- 1286 INITRD_ARCH=arm
- 1287 KERNEL_IMAGE_TYPE=Image
- 1288
- 1289 ### boot environment:
- 1290
- 1291 -----BEGIN OPENSSH PRIVATE KEY-----
- 1292 b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAABlwAAAAdzc2gtcn
- 1293 NhAAAAAwEAAQAAAYEAwaPSLnXY+hKD36KOC3ntCyztDMwRjvRhBgcjOLXAEnchWiudGpTp
- 1294 2JDLhTBdR6/04rWZ5BDZSAZp9
- 1295 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
- 1296
- 1297 ### lsusb:
- 1298
- 1299 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 1300 Bus 002 Device 004: ID 0e8f:00a8 GreenAsia Inc.
- 1301 Bus 002 Device 003: ID 3938:1032 USB 2.0 Hub
- 1302 Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
- 1303 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1304 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 1305 Bus 001 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
- 1306 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1307 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1308
- 1309 ### lscpu:
- 1310
- 1311 Architecture: armv7l
- 1312 Byte Order: Little Endian
- 1313 CPU(s): 2
- 1314 On-line CPU(s) list: 0,1
- 1315 Thread(s) per core: 1
- 1316 Core(s) per socket: 2
- 1317 Socket(s): 1
- 1318 Vendor ID: ARM
- 1319 Model: 4
- 1320 Model name: Cortex-A7
- 1321 Stepping: r0p4
- 1322 CPU max MHz: 960.0000
- 1323 CPU min MHz: 144.0000
- 1324 BogoMIPS: 50.52
- 1325 Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 1326
- 1327 ### cpuinfo:
- 1328
- 1329 processor : 0
- 1330 model name : ARMv7 Processor rev 4 (v7l)
- 1331 BogoMIPS : 50.52
- 1332 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 1333 CPU implementer : 0x41
- 1334 CPU architecture: 7
- 1335 CPU variant : 0x0
- 1336 CPU part : 0xc07
- 1337 CPU revision : 4
- 1338
- 1339 processor : 1
- 1340 model name : ARMv7 Processor rev 4 (v7l)
- 1341 BogoMIPS : 50.52
- 1342 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
- 1343 CPU implementer : 0x41
- 1344 CPU architecture: 7
- 1345 CPU variant : 0x0
- 1346 CPU part : 0xc07
- 1347 CPU revision : 4
- 1348
- 1349 Hardware : Allwinner sun7i (A20) Family
- 1350 Revision : 0000
- 1351 Serial : 165166450742d519
- 1352
- 1353 ### meminfo:
- 1354
- 1355 MemTotal: 1022940 kB
- 1356 MemFree: 931368 kB
- 1357 MemAvailable: 953544 kB
- 1358 Buffers: 9228 kB
- 1359 Cached: 29504 kB
- 1360 SwapCached: 0 kB
- 1361 Active: 22292 kB
- 1362 Inactive: 23616 kB
- 1363 Active(anon): 368 kB
- 1364 Inactive(anon): 8804 kB
- 1365 Active(file): 21924 kB
- 1366 Inactive(file): 14812 kB
- 1367 Unevictable: 0 kB
- 1368 Mlocked: 0 kB
- 1369 HighTotal: 262144 kB
- 1370 HighFree: 213184 kB
- 1371 LowTotal: 760796 kB
- 1372 LowFree: 718184 kB
- 1373 SwapTotal: 511468 kB
- 1374 SwapFree: 511468 kB
- 1375 Dirty: 988 kB
- 1376 Writeback: 0 kB
- 1377 AnonPages: 7204 kB
- 1378 Mapped: 8200 kB
- 1379 Shmem: 2000 kB
- 1380 KReclaimable: 9364 kB
- 1381 Slab: 25024 kB
- 1382 SReclaimable: 9364 kB
- 1383 SUnreclaim: 15660 kB
- 1384 KernelStack: 648 kB
- 1385 PageTables: 284 kB
- 1386 NFS_Unstable: 0 kB
- 1387 Bounce: 0 kB
- 1388 WritebackTmp: 0 kB
- 1389 CommitLimit: 1022936 kB
- 1390 Committed_AS: 12672 kB
- 1391 VmallocTotal: 245760 kB
- 1392 VmallocUsed: 11452 kB
- 1393 VmallocChunk: 0 kB
- 1394 Percpu: 312 kB
- 1395 CmaTotal: 98304 kB
- 1396 CmaFree: 96888 kB
- 1397
- 1398 ### virtual memory:
- 1399
- 1400 vm.admin_reserve_kbytes = 8192
- 1401 vm.block_dump = 0
- 1402 vm.compaction_proactiveness = 20
- 1403 vm.compact_unevictable_allowed = 1
- 1404 vm.dirty_background_bytes = 0
- 1405 vm.dirty_background_ratio = 10
- 1406 vm.dirty_bytes = 0
- 1407 vm.dirty_expire_centisecs = 3000
- 1408 vm.dirty_ratio = 20
- 1409 vm.dirtytime_expire_seconds = 43200
- 1410 vm.dirty_writeback_centisecs = 500
- 1411 vm.extfrag_threshold = 500
- 1412 vm.highmem_is_dirtyable = 0
- 1413 vm.laptop_mode = 0
- 1414 vm.legacy_va_layout = 0
- 1415 vm.lowmem_reserve_ratio = 32 0 0
- 1416 vm.max_map_count = 65530
- 1417 vm.min_free_kbytes = 3460
- 1418 vm.mmap_min_addr = 32768
- 1419 vm.mmap_rnd_bits = 8
- 1420 vm.oom_dump_tasks = 1
- 1421 vm.oom_kill_allocating_task = 0
- 1422 vm.overcommit_kbytes = 0
- 1423 vm.overcommit_memory = 0
- 1424 vm.overcommit_ratio = 50
- 1425 vm.page-cluster = 0
- 1426 vm.page_lock_unfairness = 5
- 1427 vm.panic_on_oom = 0
- 1428 vm.percpu_pagelist_fraction = 0
- 1429 vm.stat_interval = 1
- 1430 vm.swappiness = 100
- 1431 vm.user_reserve_kbytes = 31447
- 1432 vm.vfs_cache_pressure = 100
- 1433 vm.watermark_boost_factor = 15000
- 1434 vm.watermark_scale_factor = 10
- 1435
- 1436 ### ip addr:
- 1437
- 1438 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
- 1439 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- 1440 inet XXX.XXX.0.1/8 scope host lo
- 1441 valid_lft forever preferred_lft forever
- 1442 inet6 ::1/128 scope host
- 1443 valid_lft forever preferred_lft forever
- 1444 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
- 1445 link/ether 02:45:07:42:d5:19 brd ff:ff:ff:ff:ff:ff
- 1446 3: wlx8c18d9730032: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
- 1447 link/ether 8c:18:d9:73:00:32 brd ff:ff:ff:ff:ff:ff
- 1448
- 1449 ### partitions:
- 1450
- 1451 major minor #blocks name
- 1452
- 1453 179 0 7761920 mmcblk0
- 1454 179 1 7602576 mmcblk0p1
- 1455 254 0 511472 zram0
- 1456 254 1 51200 zram1
- 1457
- 1458 ### df:
- 1459
- 1460 udev 446M 0 446M 0% /dev
- 1461 tmpfs 100M 2.0M 98M 2% /run
- 1462 /dev/mmcblk0p1 7.1G 1012M 6.0G 15% /
- 1463 tmpfs 500M 0 500M 0% /dev/shm
- 1464 tmpfs 5.0M 4.0K 5.0M 1% /run/lock
- 1465 tmpfs 500M 0 500M 0% /sys/fs/cgroup
- 1466 tmpfs 500M 0 500M 0% /tmp
- 1467 /dev/zram1 49M 968K 44M 3% /var/log
- 1468
- 1469 ### lsblk:
- 1470
- 1471 NAME FSTYPE SIZE MOUNTPOINT UUID
- 1472 mmcblk0 7.4G
- 1473 └─mmcblk0p1 ext4 7.3G / 091febf7-a8e0-4243-8264-8902b803f507
- 1474 zram1 50M /var/log
- 1475
- 1476 ### zramctl:
- 1477
- 1478 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
- 1479 /dev/zram1 zstd 50M 68K 698B 52K 2 /var/log
- 1480 /dev/zram0 lzo-rle 499.5M 4K 73B 4K 2 [SWAP]
- 1481
- 1482 ### mtab:
- 1483
- 1484 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
- 1485 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
- 1486 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
- 1487
- 1488 ### mmc0:aaaa info:
- 1489
- 1490 manfid: 0x000003
- 1491 cid: 035344534c303847800133154900f413
- 1492 fwrev: 0x0
- 1493 rca: 0xaaaa
- 1494 csd: 400e00325b5900003b377f800a4040af
- 1495 ocr: 0x00200000
- 1496 type: SD
- 1497 date: 04/2015
- 1498 hwrev: 0x8
- 1499 dsr: 0x404
- 1500 serial: 0x01331549
- 1501 erase_size: 512
- 1502 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SL08G MODALIAS=mmc:block
- 1503 ssr: 00000000030000000400900014050a00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
- 1504 scr: 0235800100000000
- 1505 oemid: 0x5344
- 1506 preferred_erase_size: 4194304
- 1507 name: SL08G
- 1508
- 1509 ### Boot system health:
- 1510
- 1511 Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St.
- 1512 08:18:43: 960MHz 1.61 81% 42% 37% 0% 1% 0% 39.5°C 38.2°C 5.41V 0/6
- 1513 08:18:44: 960MHz 1.61 96% 49% 34% 2% 10% 0% 39.3°C 38.4°C 5.42V 0/6
- 1514 08:18:46: 960MHz 1.61 90% 38% 49% 1% 0% 0% 39.3°C 38.0°C 5.44V 0/6
- 1515 08:18:47: 960MHz 1.88 96% 30% 64% 1% 0% 0% 39.6°C 38.2°C 5.45V 0/6
- 1516 08:18:49: 960MHz 1.88 86% 23% 60% 2% 0% 0% 39.2°C 37.8°C 5.43V 0/6
- 1517
- 1518 ### lsusb:
- 1519
- 1520 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 1521 Bus 002 Device 004: ID 0e8f:00a8 GreenAsia Inc.
- 1522 Bus 002 Device 003: ID 3938:1032 USB 2.0 Hub
- 1523 Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
- 1524 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1525 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- 1526 Bus 001 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter
- 1527 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1528 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- 1529
- 1530 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
- 1531 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
- 1532 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
- 1533 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
- 1534 |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
- 1535 |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
- 1536 |__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
- 1537 |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
- 1538 |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
- 1539 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
- 1540 |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=8188eu, 480M
- 1541
- 1542 ### Installed packages:
- 1543
- 1544 ii armbian-config 21.02.3 all Armbian configuration utility
- 1545 ii armbian-firmware 21.02.3 all Linux firmware
- 1546 ii armbian-zsh 21.02.3 all Armbian improved ZShell
- 1547 ii hostapd 3:2.9-102~armbian20.05.2+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
- 1548 ii htop 3.1.0-0~armbian20.08.2+1 armhf interactive processes viewer
- 1549 ii linux-base 4.5ubuntu3.1 all Linux image base package
- 1550 ii linux-dtb-current-sunxi 21.02.3 armhf Linux DTB, version 5.10.21-sunxi
- 1551 ii linux-focal-root-current-pcduino3 21.02.3 armhf Armbian tweaks for focal on pcduino3 (current branch)
- 1552 ii linux-image-current-sunxi 21.02.3 armhf Linux kernel, version 5.10.21-sunxi
- 1553 ii linux-libc-dev:armhf 5.4.0-66.74 armhf Linux Kernel Headers for development
- 1554 ii linux-u-boot-pcduino3-current 21.02.3 armhf Uboot loader 2020.10
- 1555
- 1556 ### Loaded modules:
- 1557
- 1558 Module Size Used by
- 1559 axp20x_adc 16384 0
- 1560 lima 45056 0
- 1561 gpu_sched 28672 1 lima
- 1562 sun4i_gpadc_iio 16384 0
- 1563 industrialio 53248 2 sun4i_gpadc_iio,axp20x_adc
- 1564 8188eu 1015808 0
- 1565 joydev 24576 0
- 1566 input_leds 16384 0
- 1567 sun4i_ts 16384 0
- 1568 sunxi_cir 20480 0
- 1569 cfg80211 491520 1 8188eu
- 1570 rfkill 20480 3 cfg80211
- 1571 sunxi_cedrus 32768 0
- 1572 v4l2_mem2mem 20480 1 sunxi_cedrus
- 1573 videobuf2_dma_contig 20480 1 sunxi_cedrus
- 1574 videobuf2_memops 20480 1 videobuf2_dma_contig
- 1575 videobuf2_v4l2 20480 2 sunxi_cedrus,v4l2_mem2mem
- 1576 videobuf2_common 40960 3 sunxi_cedrus,v4l2_mem2mem,videobuf2_v4l2
- 1577 evdev 20480 7
- 1578 uio_pdrv_genirq 20480 0
- 1579 uio 16384 1 uio_pdrv_genirq
- 1580 cpufreq_dt 20480 0
- 1581 zram 24576 2
- 1582 sch_fq_codel 20480 5
- 1583 ip_tables 24576 0
- 1584 x_tables 24576 1 ip_tables
- 1585 autofs4 36864 2
- 1586 pinctrl_axp209 16384 0
- 1587 sun4i_gpadc 16384 0
- 1588 sunxi 16384 0
- 1589 phy_generic 20480 2 sunxi
- 1590 gpio_keys 20480 0
- 1591 realtek 20480 0
- 1592
- 1593 ### Current system health:
- 1594
- 1595 Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St.
- 1596 08:33:29: 960MHz 0.43 10% 6% 3% 0% 0% 0% 36.9°C 36.0°C 5.44V 0/6
- 1597 08:33:30: 960MHz 0.43 17% 14% 0% 2% 0% 0% 36.7°C 36.0°C 5.43V 0/6
- 1598 08:33:32: 960MHz 0.43 13% 11% 0% 1% 0% 0% 36.9°C 36.1°C 5.45V 0/6
- 1599 08:33:33: 960MHz 0.47 24% 22% 0% 1% 0% 0% 36.5°C 36.0°C 5.45V 0/6
- 1600 08:33:34: 960MHz 0.47 12% 10% 0% 1% 0% 0% 36.6°C 36.0°C 5.42V 0/6
- 1601 08:33:37: 960MHz 0.84 10% 6% 3% 0% 0% 0% 37.7°C 37.6°C 5.44V 0/6
- 1602 08:33:39: 960MHz 0.84 77% 8% 68% 0% 0% 0% 37.1°C 36.5°C 5.44V 0/6
- 1603 08:33:41: 960MHz 0.84 14% 12% 0% 2% 0% 0% 37.1°C 36.0°C 5.41V 0/6
- 1604 08:33:42: 960MHz 0.85 11% 11% 0% 0% 0% 0% 36.9°C 36.1°C 5.43V 0/6
- 1605 08:33:44: 960MHz 0.85 11% 9% 0% 2% 0% 0% 36.8°C 36.1°C 5.45V 0/6
- 1606
- 1607 ### resolv.conf
- 1608
- 1609 -rw-rw-r-- 1 root root 19 Mar 9 08:15 /etc/resolv.conf
- 1610 nameserver XXX.XXX.0.1
- 1611
- 1612 ### Current sysinfo:
- 1613
- 1614 Linux 5.10.21-sunxi (pcduino3) 03/09/2021 _armv7l_ (2 CPU)
- 1615
- 1616 avg-cpu: %user %nice %system %iowait %steal %idle
- 1617 4.11 0.09 6.58 0.09 0.00 89.13
- 1618
- 1619 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd
- 1620 ram0 0.00 0.00 0.00 0.00 0 0 0
- 1621 ram1 0.00 0.00 0.00 0.00 0 0 0
- 1622 ram2 0.00 0.00 0.00 0.00 0 0 0
- 1623 ram3 0.00 0.00 0.00 0.00 0 0 0
- 1624 mmcblk0 3.70 191.36 73.00 0.00 177841 67840 0
- 1625 mmcblk0p1 3.59 189.11 73.00 0.00 175745 67840 0
- 1626 zram0 0.61 2.44 0.00 0.00 2272 4 0
- 1627 zram1 0.25 0.53 1.59 0.00 488 1480 0
- 1628 zram2 0.00 0.00 0.00 0.00 0 0 0
- 1629
- 1630 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu--------
- 1631 r b swpd free buff cache si so bi bo in cs us sy id wa st
- 1632 0 0 0 735228 10040 208184 0 0 96 37 136 127 4 7 89 0 0
- 1633
- 1634 total used free shared buff/cache available
- 1635 Mem: 998Mi 67Mi 717Mi 3.0Mi 213Mi 904Mi
- 1636 Swap: 499Mi 0B 499Mi
- 1637
- 1638 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
- 1639 /dev/zram1 zstd 50M 1.2M 264.1K 644K 2 /var/log
- 1640 /dev/zram0 lzo-rle 499.5M 4K 73B 4K 2 [SWAP]
- 1641
- 1642 08:33:46 up 15 min, 1 user, load average: 0.85, 0.37, 0.23
- 1643
- 1644 [ 3.102554] usb 1-1: Manufacturer: Realtek
- 1645 [ 3.102562] usb 1-1: SerialNumber: 8C18D9730032
- 1646 [ 3.114650] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- 1647 [ 3.114671] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- 1648 [ 3.114681] usb 2-1: Product: USB 2.0 Hub
- 1649 [ 3.117517] hub 2-1:1.0: USB hub found
- 1650 [ 3.118799] hub 2-1:1.0: 4 ports detected
- 1651 [ 3.525439] usb 2-1.1: new full-speed USB device number 3 using ehci-platform
- 1652 [ 3.638198] input: gpio-keys as /devices/platform/gpio-keys/input/input1
- 1653 [ 3.756528] usb 2-1.1: New USB device found, idVendor=3938, idProduct=1032, bcdDevice= 1.08
- 1654 [ 3.756551] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 1655 [ 3.756559] usb 2-1.1: Product: 2.4G RF Keyboard & Mouse
- 1656 [ 3.756567] usb 2-1.1: Manufacturer: MOSART Semi.
- 1657 [ 3.764907] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:3938:1032.0001/input/input2
- 1658 [ 3.822134] hid-generic 0003:3938:1032.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input0
- 1659 [ 3.829203] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input3
- 1660 [ 3.829696] input: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input4
- 1661 [ 3.879245] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator
- 1662 [ 3.880753] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- 1663 [ 3.880791] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
- 1664 [ 3.880908] phy id_det change to device
- 1665 [ 3.889787] input: MOSART Semi. 2.4G RF Keyboard & Mouse System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input5
- 1666 [ 3.890037] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:3938:1032.0002/input/input7
- 1667 [ 3.890765] hid-generic 0003:3938:1032.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-1c1c000.usb-1.1/input1
- 1668 [ 3.891996] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- 1669 [ 3.892017] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- 1670 [ 3.892027] usb usb5: Product: MUSB HDRC host driver
- 1671 [ 3.892035] usb usb5: Manufacturer: Linux 5.10.21-sunxi musb-hcd
- 1672 [ 3.892043] usb usb5: SerialNumber: musb-hdrc.1.auto
- 1673 [ 3.894897] hub 5-0:1.0: USB hub found
- 1674 [ 3.894982] hub 5-0:1.0: 1 port detected
- 1675 [ 4.074895] sun5i-a13-gpadc-iio: Failed to locate of_node [id: 0]
- 1676 [ 4.089763] usb 2-1.2: new low-speed USB device number 4 using ehci-platform
- 1677 [ 4.100353] axp20x-gpio axp20x-gpio: DMA mask not set
- 1678 [ 4.102001] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
- 1679 [ 4.337819] usb 2-1.2: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11
- 1680 [ 4.337844] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- 1681 [ 4.337853] usb 2-1.2: Product: 2.4G RX
- 1682 [ 4.337861] usb 2-1.2: Manufacturer: DaKai
- 1683 [ 4.346551] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:0E8F:00A8.0003/input/input8
- 1684 [ 4.405753] hid-generic 0003:0E8F:00A8.0003: input,hidraw2: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input0
- 1685 [ 4.416079] input: DaKai 2.4G RX Mouse as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input9
- 1686 [ 4.416302] input: DaKai 2.4G RX System Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input10
- 1687 [ 4.473710] input: DaKai 2.4G RX Consumer Control as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input11
- 1688 [ 4.473888] input: DaKai 2.4G RX as /devices/platform/soc/1c1c000.usb/usb2/2-1/2-1.2/2-1.2:1.1/0003:0E8F:00A8.0004/input/input12
- 1689 [ 4.474409] hid-generic 0003:0E8F:00A8.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-1c1c000.usb-1.2/input1
- 1690 [ 5.000178] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- 1691 [ 5.742460] systemd[1]: System time before build time, advancing clock.
- 1692 [ 5.776448] systemd[1]: Inserted module 'autofs4'
- 1693 [ 5.853548] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- 1694 [ 5.854345] systemd[1]: Detected architecture arm.
- 1695 [ 5.899043] systemd[1]: Set hostname to <pcduino3>.
- 1696 [ 6.490842] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
- 1697 [ 6.956751] random: systemd: uninitialized urandom read (16 bytes read)
- 1698 [ 6.963512] systemd[1]: Created slice system-modprobe.slice.
- 1699 [ 6.964354] random: systemd: uninitialized urandom read (16 bytes read)
- 1700 [ 6.966644] systemd[1]: Created slice system-serial-getty.slice.
- 1701 [ 6.967255] random: systemd: uninitialized urandom read (16 bytes read)
- 1702 [ 6.969091] systemd[1]: Created slice User and Session Slice.
- 1703 [ 6.969775] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1704 [ 6.970409] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- 1705 [ 6.972401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- 1706 [ 6.973176] systemd[1]: Reached target Local Encrypted Volumes.
- 1707 [ 6.974113] systemd[1]: Reached target Remote File Systems.
- 1708 [ 6.974577] systemd[1]: Reached target Slices.
- 1709 [ 6.975062] systemd[1]: Reached target Swap.
- 1710 [ 6.975504] systemd[1]: Reached target System Time Set.
- 1711 [ 6.976857] systemd[1]: Listening on Syslog Socket.
- 1712 [ 6.978386] systemd[1]: Listening on fsck to fsckd communication Socket.
- 1713 [ 6.979414] systemd[1]: Listening on initctl Compatibility Named Pipe.
- 1714 [ 6.981540] systemd[1]: Listening on Journal Audit Socket.
- 1715 [ 6.982949] systemd[1]: Listening on Journal Socket (/dev/log).
- 1716 [ 6.984488] systemd[1]: Listening on Journal Socket.
- 1717 [ 6.986229] systemd[1]: Listening on udev Control Socket.
- 1718 [ 6.987468] systemd[1]: Listening on udev Kernel Socket.
- 1719 [ 6.988823] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1720 [ 6.996828] systemd[1]: Mounting POSIX Message Queue File System...
- 1721 [ 7.007640] systemd[1]: Mounting Kernel Debug File System...
- 1722 [ 7.018627] systemd[1]: Mounting Kernel Trace File System...
- 1723 [ 7.033164] systemd[1]: Starting Restore / save the current clock...
- 1724 [ 7.051216] systemd[1]: Starting Set the console keyboard layout...
- 1725 [ 7.067126] systemd[1]: Starting Create list of static device nodes for the current kernel...
- 1726 [ 7.068256] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
- 1727 [ 7.083774] systemd[1]: Started Nameserver information manager.
- 1728 [ 7.085876] systemd[1]: Reached target Network (Pre).
- 1729 [ 7.090392] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1730 [ 7.090932] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- 1731 [ 7.119759] systemd[1]: Starting Load Kernel Modules...
- 1732 [ 7.138934] systemd[1]: Starting Remount Root and Kernel File Systems...
- 1733 [ 7.175223] systemd[1]: Starting udev Coldplug all Devices...
- 1734 [ 7.210630] systemd[1]: Mounted POSIX Message Queue File System.
- 1735 [ 7.212777] systemd[1]: Mounted Kernel Debug File System.
- 1736 [ 7.224467] systemd[1]: Mounted Kernel Trace File System.
- 1737 [ 7.241739] systemd[1]: Finished Restore / save the current clock.
- 1738 [ 7.252647] systemd[1]: Finished Create list of static device nodes for the current kernel.
- 1739 [ 7.287584] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
- 1740 [ 7.288263] systemd[1]: Finished Load Kernel Modules.
- 1741 [ 7.305993] systemd[1]: Finished Remount Root and Kernel File Systems.
- 1742 [ 7.318098] systemd[1]: Mounting FUSE Control File System...
- 1743 [ 7.335956] systemd[1]: Mounting Kernel Configuration File System...
- 1744 [ 7.339617] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1745 [ 7.340277] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1746 [ 7.363740] systemd[1]: Starting Load/Save Random Seed...
- 1747 [ 7.385217] systemd[1]: Starting Apply Kernel Variables...
- 1748 [ 7.402708] systemd[1]: Starting Create System Users...
- 1749 [ 7.425233] systemd[1]: Mounted FUSE Control File System.
- 1750 [ 7.438098] systemd[1]: Mounted Kernel Configuration File System.
- 1751 [ 7.552369] systemd[1]: Finished Create System Users.
- 1752 [ 7.570991] systemd[1]: Starting Create Static Device Nodes in /dev...
- 1753 [ 7.596959] systemd[1]: Finished Apply Kernel Variables.
- 1754 [ 7.729659] systemd[1]: Finished Create Static Device Nodes in /dev.
- 1755 [ 7.741253] systemd[1]: Starting udev Kernel Device Manager...
- 1756 [ 7.911628] systemd[1]: Finished Set the console keyboard layout.
- 1757 [ 7.913528] systemd[1]: Reached target Local File Systems (Pre).
- 1758 [ 7.928325] systemd[1]: Mounting /tmp...
- 1759 [ 7.964299] systemd[1]: Mounted /tmp.
- 1760 [ 7.966147] systemd[1]: Reached target Local File Systems.
- 1761 [ 7.975808] systemd[1]: Starting Armbian ZRAM config...
- 1762 [ 7.992094] systemd[1]: Starting Set console font and keymap...
- 1763 [ 7.996429] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
- 1764 [ 7.998074] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1765 [ 8.004841] systemd[1]: Started udev Kernel Device Manager.
- 1766 [ 8.137258] systemd[1]: Finished Set console font and keymap.
- 1767 [ 8.467749] systemd[1]: Finished udev Coldplug all Devices.
- 1768 [ 8.488769] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
- 1769 [ 8.558984] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
- 1770 [ 8.572164] systemd[1]: Starting Raise network interfaces...
- 1771 [ 8.886325] zram: Added device: zram0
- 1772 [ 8.890248] zram: Added device: zram1
- 1773 [ 8.894523] zram: Added device: zram2
- 1774 [ 9.364082] zram0: detected capacity change from 0 to 523747328
- 1775 [ 9.801492] random: crng init done
- 1776 [ 9.801516] random: 7 urandom warning(s) missed due to ratelimiting
- 1777 [ 9.828666] systemd[1]: Finished Load/Save Random Seed.
- 1778 [ 9.830509] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1779 [ 9.989514] Adding 511468k swap on /dev/zram0. Priority:5 extents:1 across:511468k SSFS
- 1780 [ 10.120087] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
- 1781 [ 10.156137] cedrus 1c0e000.video-codec: Device registered as /dev/video0
- 1782 [ 10.858228] zram1: detected capacity change from 0 to 52428800
- 1783 [ 11.016321] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- 1784 [ 11.043689] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- 1785 [ 11.216321] systemd[1]: Finished Raise network interfaces.
- 1786 [ 11.286929] systemd[1]: Finished Armbian ZRAM config.
- 1787 [ 11.307759] Registered IR keymap rc-empty
- 1788 [ 11.307934] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
- 1789 [ 11.317618] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
- 1790 [ 11.317907] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input13
- 1791 [ 11.321558] sunxi-ir 1c21800.ir: initialized sunXi IR driver
- 1792 [ 11.331067] systemd[1]: Starting Armbian memory supported logging...
- 1793 [ 11.601650] bFWReady == _FALSE call reset 8051...
- 1794 [ 11.646123] usbcore: registered new interface driver 8188eu
- 1795 [ 11.824794] systemd[1]: Found device /dev/ttyS0.
- 1796 [ 11.837948] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1797 [ 11.839177] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1798 [ 11.846289] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1799 [ 11.846569] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1800 [ 11.846857] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1801 [ 11.847139] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1802 [ 11.847324] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1803 [ 12.029876] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
- 1804 [ 12.029956] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
- 1805 [ 12.030037] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
- 1806 [ 12.030095] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
- 1807 [ 12.053713] lima 1c40000.gpu: bus rate = 300000000
- 1808 [ 12.053734] lima 1c40000.gpu: mod rate = 384000000
- 1809 [ 12.054415] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
- 1810 [ 12.054487] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
- 1811 [ 12.057542] [drm] Initialized lima 1.2.0 20200215 for 1c40000.gpu on minor 0
- 1812 [ 12.482331] axp20x-adc axp20x-adc: DMA mask not set
- 1813 [ 12.813601] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- 1814 [ 12.814746] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- 1815 [ 12.815443] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- 1816 [ 12.815706] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- 1817 [ 12.816039] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- 1818 [ 12.816381] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- 1819 [ 12.816621] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- 1820 [ 13.239720] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- 1821 [ 13.304586] systemd[1]: Starting Load/Save RF Kill Switch Status...
- 1822 [ 13.387587] 8188eu 1-1:1.0 wlx8c18d9730032: renamed from wlan0
- 1823 [ 13.433166] systemd[1]: Started Load/Save RF Kill Switch Status.
- 1824 [ 17.420924] systemd[1]: Finished Armbian memory supported logging.
- 1825 [ 17.435463] systemd[1]: Starting Journal Service...
- 1826 [ 17.823810] systemd[1]: Started Journal Service.
- 1827 [ 17.898645] systemd-journald[514]: Received client request to flush runtime journal.
- 1828 [ 27.288244] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1829 [ 27.493507] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1830 [ 27.499864] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1831 [ 27.508932] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1832 [ 28.534073] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1833 [ 28.747515] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1834 [ 28.753733] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1835 [ 28.762654] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1836 [ 29.048163] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1837 [ 29.257439] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1838 [ 29.263619] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1839 [ 29.272475] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1840 [ 29.601253] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1841 [ 29.811493] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1842 [ 29.817710] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1843 [ 29.826658] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1844 [ 29.982706] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1845 [ 30.241516] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1846 [ 30.247751] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1847 [ 30.256740] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1848 [ 33.769489] vcc3v0: disabling
- 1849 [ 33.769513] vcc5v0: disabling
- 1850 [ 331.043763] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1851 [ 331.249444] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1852 [ 331.255622] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1853 [ 331.264485] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1854 [ 331.317713] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1855 [ 331.528610] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1856 [ 331.534838] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1857 [ 331.543738] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1858 [ 331.616146] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1859 [ 331.821792] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1860 [ 331.827972] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1861 [ 331.836832] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1862 [ 331.885697] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1863 [ 332.093421] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1864 [ 332.099593] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1865 [ 332.108441] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1866 [ 632.040631] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1867 [ 632.041597] alloc_contig_range: [4a04e, 4a050) PFNs busy
- 1868 [ 632.244513] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1869 [ 632.250689] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1870 [ 632.259551] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1871 [ 632.320804] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1872 [ 632.321569] alloc_contig_range: [4a04e, 4a050) PFNs busy
- 1873 [ 632.527910] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1874 [ 632.534088] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1875 [ 632.542937] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1876 [ 632.606335] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1877 [ 632.607025] alloc_contig_range: [4a04e, 4a050) PFNs busy
- 1878 [ 632.810084] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1879 [ 632.816260] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1880 [ 632.825113] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1881 [ 632.884965] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1882 [ 632.888053] alloc_contig_range: [4a04e, 4a050) PFNs busy
- 1883 [ 633.095081] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1884 [ 633.101377] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1885 [ 633.110276] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1886 [ 664.743276] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1887 [ 664.953725] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1888 [ 664.959893] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1889 [ 664.968751] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1890 [ 671.172043] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
- 1891 [ 671.381870] sun7i-dwmac 1c50000.ethernet: Failed to reset the dma
- 1892 [ 671.388087] sun7i-dwmac 1c50000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
- 1893 [ 671.396980] sun7i-dwmac 1c50000.ethernet eth0: stmmac_open: Hw setup failed
- 1894
- 1895
- 1896 vm.admin_reserve_kbytes = 8192
- 1897 vm.block_dump = 0
- 1898 vm.compaction_proactiveness = 20
- 1899 vm.compact_unevictable_allowed = 1
- 1900 vm.dirty_background_bytes = 0
- 1901 vm.dirty_background_ratio = 10
- 1902 vm.dirty_bytes = 0
- 1903 vm.dirty_expire_centisecs = 3000
- 1904 vm.dirty_ratio = 20
- 1905 vm.dirtytime_expire_seconds = 43200
- 1906 vm.dirty_writeback_centisecs = 500
- 1907 vm.extfrag_threshold = 500
- 1908 vm.highmem_is_dirtyable = 0
- 1909 vm.laptop_mode = 0
- 1910 vm.legacy_va_layout = 0
- 1911 vm.lowmem_reserve_ratio = 32 0 0
- 1912 vm.max_map_count = 65530
- 1913 vm.min_free_kbytes = 3460
- 1914 vm.mmap_min_addr = 32768
- 1915 vm.mmap_rnd_bits = 8
- 1916 vm.oom_dump_tasks = 1
- 1917 vm.oom_kill_allocating_task = 0
- 1918 vm.overcommit_kbytes = 0
- 1919 vm.overcommit_memory = 0
- 1920 vm.overcommit_ratio = 50
- 1921 vm.page-cluster = 0
- 1922 vm.page_lock_unfairness = 5
- 1923 vm.panic_on_oom = 0
- 1924 vm.percpu_pagelist_fraction = 0
- 1925 vm.stat_interval = 1
- 1926 vm.swappiness = 100
- 1927 vm.user_reserve_kbytes = 31447
- 1928 vm.vfs_cache_pressure = 100
- 1929 vm.watermark_boost_factor = 15000
- 1930 vm.watermark_scale_factor = 10
- 1931
- 1932 ### interrupts:
- 1933 CPU0 CPU1
- 1934 26: 0 0 GICv2 29 Level arch_timer
- 1935 27: 57085 25594 GICv2 30 Level arch_timer
- 1936 30: 0 0 GICv2 54 Level timer@1c20c00
- 1937 31: 0 0 GICv2 113 Level sun5i_timer0
- 1938 32: 0 0 GICv2 152 Level arm-pmu
- 1939 33: 0 0 GICv2 153 Level arm-pmu
- 1940 34: 0 0 GICv2 59 Level 1c02000.dma-controller
- 1941 37: 0 0 GICv2 85 Level 1c0e000.video-codec
- 1942 38: 32897 0 GICv2 64 Level sunxi-mmc
- 1943 39: 0 0 GICv2 70 Level musb-hdrc.1.auto
- 1944 40: 46616 0 GICv2 71 Level ehci_hcd:usb1
- 1945 41: 0 0 GICv2 96 Level ohci_hcd:usb3
- 1946 43: 0 0 GICv2 88 Level ahci-sunxi[1c18000.sata]
- 1947 44: 120 0 GICv2 72 Level ehci_hcd:usb2
- 1948 45: 0 0 GICv2 97 Level ohci_hcd:usb4
- 1949 48: 0 0 GICv2 56 Level 1c20d00.rtc
- 1950 52: 0 0 GICv2 37 Level sunxi-ir
- 1951 54: 842 0 GICv2 61 Level sun4i_gpadc_irq_chip
- 1952 55: 26092 0 GICv2 33 Level ttyS0
- 1953 56: 5280 0 GICv2 39 Level mv64xxx_i2c
- 1954 57: 0 0 GICv2 101 Level gp
- 1955 58: 0 0 GICv2 102 Level gpmmu
- 1956 59: 0 0 GICv2 103 Level pp0
- 1957 60: 0 0 GICv2 104 Level ppmmu0
- 1958 61: 0 0 GICv2 106 Level pp1
- 1959 62: 0 0 GICv2 107 Level ppmmu1
- 1960 71: 0 0 sunxi_pio_edge 1 Edge 1c0f000.mmc cd
- 1961 74: 1 0 sunxi_pio_edge 4 Edge usb0-id-det
- 1962 87: 1 0 sunxi_pio_edge 17 Edge Key Back
- 1963 88: 1 0 sunxi_pio_edge 18 Edge Key Home
- 1964 89: 1 0 sunxi_pio_edge 19 Edge Key Menu
- 1965 102: 0 0 sunxi-nmi 0 Level axp20x_irq_chip
- 1966 136: 0 0 axp20x_irq_chip 33 Edge axp20x-pek-dbr
- 1967 137: 0 0 axp20x_irq_chip 34 Edge axp20x-pek-dbf
- 1968 142: 842 0 sun4i_gpadc_irq_chip 2 Edge temp_data
- 1969 143: 0 0 sun4i_gpadc_irq_chip 1 Edge fifo_data
- 1970 IPI0: 0 0 CPU wakeup interrupts
- 1971 IPI1: 0 0 Timer broadcast interrupts
- 1972 IPI2: 5519 47476 Rescheduling interrupts
- 1973 IPI3: 616 1686 Function call interrupts
- 1974 IPI4: 0 0 CPU stop interrupts
- 1975 IPI5: 1151 1444 IRQ work interrupts
- 1976 IPI6: 0 0 completion interrupts
- 1977 Err: 0
- Please upload the whole output above to an online pasteboard service
- and provide the URL in the forum where you have been asked for this.
Add Comment
Please, Sign In to add comment