Advertisement
Guest User

Untitled

a guest
Oct 21st, 2015
179
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.47 KB | None | 0 0
  1. [ 0.000000] Linux version 3.18.21 (bdb@builder) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47165) ) #2 Sat Oct 17 21:07:07 CEST 2015
  2. [ 0.000000] MyLoader: sysp=8d0734c9, boardp=6e1d1b6c, parts=d7a9fd94
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Zone ranges:
  10. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
  15. [ 0.000000] On node 0 totalpages: 8192
  16. [ 0.000000] free_area_init_node: node 0, pgdat 803802b0, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 64 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  20. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  21. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  25. [ 0.000000] Kernel command line: board=TL-WR841N-v9 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  26. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 28324K/32768K available (2614K kernel code, 133K rwdata, 548K rodata, 216K init, 194K bss, 4444K reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.000000] Clocks: CPU:650.000MHz, DDR:391.088MHz, AHB:216.666MHz, Ref:25.000MHz
  35. [ 0.000000] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  36. [ 0.060000] pid_max: default: 32768 minimum: 301
  37. [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  38. [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.080000] NET: Registered protocol family 16
  40. [ 0.080000] MIPS: machine is TP-LINK TL-WR841N/ND v9
  41. [ 0.540000] Switched to clocksource MIPS
  42. [ 0.540000] NET: Registered protocol family 2
  43. [ 0.550000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.550000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.560000] TCP: Hash tables configured (established 1024 bind 1024)
  46. [ 0.560000] TCP: reno registered
  47. [ 0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  48. [ 0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.580000] NET: Registered protocol family 1
  50. [ 0.580000] PCI: CLS 0 bytes, default 32
  51. [ 0.580000] futex hash table entries: 256 (order: -1, 3072 bytes)
  52. [ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  53. [ 0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  54. [ 0.610000] msgmni has been set to 55
  55. [ 0.620000] io scheduler noop registered
  56. [ 0.620000] io scheduler deadline registered (default)
  57. [ 0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  58. [ 0.630000] console [ttyS0] disabled
  59. [ 0.660000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  60. [ 0.670000] console [ttyS0] enabled
  61. [ 0.670000] bootconsole [early0] disabled
  62. [ 0.680000] m25p80 spi0.0: found w25q32, expected m25p80
  63. [ 0.690000] m25p80 spi0.0: w25q32 (4096 Kbytes)
  64. [ 0.690000] 5 tp-link partitions found on MTD device spi0.0
  65. [ 0.700000] Creating 5 MTD partitions on "spi0.0":
  66. [ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
  67. [ 0.710000] 0x000000020000-0x000000142ca0 : "kernel"
  68. [ 0.720000] 0x000000142ca0-0x0000003f0000 : "rootfs"
  69. [ 0.720000] mtd: device 2 (rootfs) set to be root filesystem
  70. [ 0.730000] 1 squashfs-split partitions found on MTD device rootfs
  71. [ 0.740000] 0x000000380000-0x0000003f0000 : "rootfs_data"
  72. [ 0.740000] 0x0000003f0000-0x000000400000 : "art"
  73. [ 0.750000] 0x000000020000-0x0000003f0000 : "firmware"
  74. [ 0.790000] libphy: ag71xx_mdio: probed
  75. [ 1.380000] ag71xx-mdio.1: Found an AR934X built-in switch
  76. [ 1.420000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  77. [ 2.020000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
  78. [ 2.030000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  79. [ 2.040000] TCP: cubic registered
  80. [ 2.040000] NET: Registered protocol family 17
  81. [ 2.040000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  82. [ 2.060000] Bridge firewalling registered
  83. [ 2.060000] 8021q: 802.1Q VLAN Support v1.8
  84. [ 2.080000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  85. [ 2.080000] Freeing unused kernel memory: 216K (8039a000 - 803d0000)
  86. [ 3.210000] init: Console is alive
  87. [ 3.220000] init: - watchdog -
  88. [ 5.230000] init: - preinit -
  89. [ 5.890000] random: procd urandom read with 9 bits of entropy available
  90. [ 9.060000] jffs2: notice: (352) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  91. [ 9.080000] mount_root: switching to jffs2 overlay
  92. [ 9.270000] procd: - early -
  93. [ 9.280000] procd: - watchdog -
  94. [ 9.960000] procd: - ubus -
  95. [ 10.970000] procd: - init -
  96. [ 11.900000] NET: Registered protocol family 10
  97. [ 11.910000] tun: Universal TUN/TAP device driver, 1.6
  98. [ 11.920000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  99. [ 11.930000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  100. [ 11.950000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded
  101. [ 11.970000] u32 classifier
  102. [ 11.970000] input device check on
  103. [ 11.980000] Actions configured
  104. [ 11.980000] Mirror/redirect action on
  105. [ 12.000000] netem: version 1.3
  106. [ 12.040000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  107. [ 12.040000] Backport generated by backports.git backports-20150129-0-gdd4a670
  108. [ 12.120000] Ebtables v2.0 registered
  109. [ 12.120000] ip_tables: (C) 2000-2006 Netfilter Core Team
  110. [ 12.150000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
  111. [ 12.230000] xt_time: kernel timezone is -0000
  112. [ 12.260000] cfg80211: Calling CRDA to update world regulatory domain
  113. [ 12.290000] cfg80211: World regulatory domain updated:
  114. [ 12.290000] cfg80211: DFS Master region: unset
  115. [ 12.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  116. [ 12.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  117. [ 12.310000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  118. [ 12.320000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  119. [ 12.330000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  120. [ 12.340000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  121. [ 12.350000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  122. [ 12.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  123. [ 12.370000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  124. [ 12.490000] ath: EEPROM regdomain: 0x0
  125. [ 12.490000] ath: EEPROM indicates default country code should be used
  126. [ 12.490000] ath: doing EEPROM country->regdmn map search
  127. [ 12.490000] ath: country maps to regdmn code: 0x3a
  128. [ 12.490000] ath: Country alpha2 being used: US
  129. [ 12.490000] ath: Regpair used: 0x3a
  130. [ 12.500000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  131. [ 12.510000] ieee80211 phy0: Atheros AR9531 Rev:0 mem=0xb8100000, irq=47
  132. [ 12.520000] cfg80211: Calling CRDA for country: US
  133. [ 12.520000] cfg80211: Regulatory domain changed to country: US
  134. [ 12.530000] cfg80211: DFS Master region: FCC
  135. [ 12.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  136. [ 12.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  137. [ 12.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  138. [ 12.560000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  139. [ 12.570000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  140. [ 12.580000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  141. [ 23.980000] device eth0 entered promiscuous mode
  142. [ 23.990000] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
  143. [ 24.040000] device eth1 entered promiscuous mode
  144. [ 24.050000] br-wan: port 1(eth1) entered forwarding state
  145. [ 24.060000] br-wan: port 1(eth1) entered forwarding state
  146. [ 24.120000] device br-client entered promiscuous mode
  147. [ 24.130000] IPv6: ADDRCONF(NETDEV_UP): local-node: link is not ready
  148. [ 25.260000] br-wan: port 1(eth1) entered disabled state
  149. [ 25.550000] cfg80211: Calling CRDA for country: DE
  150. [ 25.550000] cfg80211: Regulatory domain changed to country: DE
  151. [ 25.560000] cfg80211: DFS Master region: ETSI
  152. [ 25.560000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  153. [ 25.570000] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  154. [ 25.580000] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  155. [ 25.590000] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  156. [ 25.600000] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
  157. [ 25.610000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  158. [ 26.380000] eth1: link up (100Mbps/Full duplex)
  159. [ 26.380000] br-wan: port 1(eth1) entered forwarding state
  160. [ 26.390000] br-wan: port 1(eth1) entered forwarding state
  161. [ 26.660000] batman_adv: bat0: Adding interface: mesh-vpn
  162. [ 26.660000] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1280) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1528 would solve the problem.
  163. [ 26.690000] batman_adv: bat0: Interface activated: mesh-vpn
  164. [ 26.730000] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled
  165. [ 26.740000] device bat0 entered promiscuous mode
  166. [ 26.740000] br-client: port 2(bat0) entered forwarding state
  167. [ 26.750000] br-client: port 2(bat0) entered forwarding state
  168. [ 26.760000] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
  169. [ 26.820000] IPv6: ADDRCONF(NETDEV_CHANGE): local-node: link becomes ready
  170. [ 27.950000] batman_adv: bat0: Changing gw mode from: off to: client
  171. [ 27.950000] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15
  172. [ 28.020000] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
  173. [ 28.390000] br-wan: port 1(eth1) entered forwarding state
  174. [ 28.750000] br-client: port 2(bat0) entered forwarding state
  175. [ 28.970000] IPv6: ADDRCONF(NETDEV_UP): client0: link is not ready
  176. [ 29.010000] device client0 entered promiscuous mode
  177. [ 29.010000] br-client: port 3(client0) entered forwarding state
  178. [ 29.020000] br-client: port 3(client0) entered forwarding state
  179. [ 29.160000] IPv6: ADDRCONF(NETDEV_CHANGE): client0: link becomes ready
  180. [ 29.450000] IPv6: ADDRCONF(NETDEV_UP): ibss0: link is not ready
  181. [ 29.490000] ibss0: Created IBSS using preconfigured BSSID f8:d1:11:87:52:2e
  182. [ 29.500000] ibss0: Creating new IBSS network, BSSID f8:d1:11:87:52:2e
  183. [ 29.510000] IPv6: ADDRCONF(NETDEV_CHANGE): ibss0: link becomes ready
  184. [ 29.910000] batman_adv: bat0: Adding interface: ibss0
  185. [ 29.910000] batman_adv: bat0: Interface activated: ibss0
  186. [ 31.020000] br-client: port 3(client0) entered forwarding state
  187. [ 34.330000] random: nonblocking pool is initialized
  188. [ 65.760000] icmp6_send: no reply to icmp error
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement