Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- AT91Bootstrap 3.8.6 (mar may 22 21:05:50 WEST 2018)
- SD/MMC: Image: Read file zImage to 0x22000000
- SD: Card Capacity: Standard
- SD: Specification Version 1.10
- SD/MMC: dt blob: Read file at91-ariag25.dtb to 0x21000000
- SD: Card Capacity: Standard
- SD: Specification Version 1.10
- Booting zImage ......
- Using device tree in place at 0x21000000
- Starting linux kernel ..., machid: 0xffffffff
- Booting Linux on physical CPU 0x0
- Linux version 4.7.4 (tiwis@tiwis-VirtualBox) (gcc version 6.4.0 (Buildroot 2017.11) ) #2 Wed May 23 07:09:15 WEST 2018
- CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
- CPU: VIVT data cache, VIVT instruction cache
- Machine model: Acme Systems Aria G25
- Memory policy: Data cache writeback
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 122048K/131072K available (5385K kernel code, 180K rwdata, 1788K rodata, 224K init, 131K bss, 9024K reserved, 0K cma-reserved)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
- lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc0709838 (7175 kB)
- .init : 0xc070a000 - 0xc0742000 ( 224 kB)
- .data : 0xc0742000 - 0xc076f140 ( 181 kB)
- .bss : 0xc076f140 - 0xc079008c ( 132 kB)
- NR_IRQS:16 nr_irqs:16 16
- clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 7167226906 ns
- sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093750ns
- Console: colour dummy device 80x30
- Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0x20008400 - 0x2000847c
- devtmpfs: initialized
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- AT91: Detected SoC family: at91sam9x5
- AT91: Detected SoC: at91sam9g25, revision 1
- No ATAGs?
- gpio-at91 fffff400.gpio: at address c8858400
- gpio-at91 fffff600.gpio: at address c885a600
- gpio-at91 fffff800.gpio: at address c885c800
- gpio-at91 fffffa00.gpio: at address c885ea00
- pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver
- clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 114675631333 ns
- at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
- at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- at91_i2c f8010000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
- at91_i2c f8010000.i2c: AT91 i2c bus driver (hw version: 0x402).
- at91_i2c f8014000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
- at91_i2c f8014000.i2c: AT91 i2c bus driver (hw version: 0x402).
- Linux video capture interface: v2.00
- Advanced Linux Sound Architecture Driver Initialized.
- Bluetooth: Core ver 2.21
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- nfc: nfc_init: NFC Core ver 0.1
- NET: Registered protocol family 39
- clocksource: Switched to clocksource tcb_clksrc
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- futex hash table entries: 256 (order: -1, 3072 bytes)
- workingset: timestamp_bits=29 max_order=15 bucket_order=0
- io scheduler noop registered (default)
- fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
- console [ttyS0] enabled
- f801c000.serial: ttyS1 at MMIO 0xf801c000 (irq = 23, base_baud = 8333333) is a ATMEL_SERIAL
- f8020000.serial: ttyS2 at MMIO 0xf8020000 (irq = 24, base_baud = 8333333) is a ATMEL_SERIAL
- f8024000.serial: ttyS3 at MMIO 0xf8024000 (irq = 25, base_baud = 8333333) is a ATMEL_SERIAL
- f8028000.serial: ttyS4 at MMIO 0xf8028000 (irq = 30, base_baud = 8333333) is a ATMEL_SERIAL
- [drm] Initialized drm 1.1.0 20060810
- brd: module loaded
- loop: module loaded
- atmel_spi f0000000.spi: version: 0x212
- atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers
- atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 29)
- spidev spi32766.0: buggy DT: spidev listed directly in DT
- ------------[ cut here ]------------
- WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:719 spidev_probe+0x5c/0x190
- Modules linked in:
- CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.4 #2
- Hardware name: Atmel AT91SAM9
- [<c000efc8>] (unwind_backtrace) from [<c000ce74>] (show_stack+0x10/0x14)
- [<c000ce74>] (show_stack) from [<c0016be8>] (__warn+0xd8/0xf4)
- [<c0016be8>] (__warn) from [<c0016ca8>] (warn_slowpath_null+0x1c/0x24)
- [<c0016ca8>] (warn_slowpath_null) from [<c02a83cc>] (spidev_probe+0x5c/0x190)
- [<c02a83cc>] (spidev_probe) from [<c02a5348>] (spi_drv_probe+0x8c/0xa4)
- [<c02a5348>] (spi_drv_probe) from [<c0253620>] (driver_probe_device+0x1bc/0x294)
- [<c0253620>] (driver_probe_device) from [<c0251f1c>] (bus_for_each_drv+0x88/0x90)
- [<c0251f1c>] (bus_for_each_drv) from [<c02533d8>] (__device_attach+0x94/0xfc)
- [<c02533d8>] (__device_attach) from [<c0252a9c>] (bus_probe_device+0x24/0x78)
- [<c0252a9c>] (bus_probe_device) from [<c025127c>] (device_add+0x400/0x4e0)
- [<c025127c>] (device_add) from [<c02a5fe4>] (spi_add_device+0xe4/0x124)
- [<c02a5fe4>] (spi_add_device) from [<c02a63e8>] (of_register_spi_device+0x274/0x2d0)
- [<c02a63e8>] (of_register_spi_device) from [<c02a6958>] (spi_register_master+0x3a0/0x420)
- [<c02a6958>] (spi_register_master) from [<c02a6a0c>] (devm_spi_register_master+0x34/0x68)
- [<c02a6a0c>] (devm_spi_register_master) from [<c02aabd0>] (atmel_spi_probe+0x584/0x64c)
- [<c02aabd0>] (atmel_spi_probe) from [<c0254d58>] (platform_drv_probe+0x54/0x9c)
- [<c0254d58>] (platform_drv_probe) from [<c0253620>] (driver_probe_device+0x1bc/0x294)
- [<c0253620>] (driver_probe_device) from [<c0253770>] (__driver_attach+0x78/0xa4)
- [<c0253770>] (__driver_attach) from [<c0251e70>] (bus_for_each_dev+0x80/0x90)
- [<c0251e70>] (bus_for_each_dev) from [<c0252d38>] (bus_add_driver+0x164/0x1d4)
- [<c0252d38>] (bus_add_driver) from [<c0253f48>] (driver_register+0xa0/0xe0)
- [<c0253f48>] (driver_register) from [<c0009778>] (do_one_initcall+0x140/0x168)
- [<c0009778>] (do_one_initcall) from [<c070ad9c>] (kernel_init_freeable+0x170/0x1b0)
- [<c070ad9c>] (kernel_init_freeable) from [<c051ce60>] (kernel_init+0x8/0xe8)
- [<c051ce60>] (kernel_init) from [<c000a310>] (ret_from_fork+0x14/0x24)
- ---[ end trace 328108aa49f35002 ]---
- spidev spi32766.1: buggy DT: spidev listed directly in DT
- ------------[ cut here ]------------
- WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:719 spidev_probe+0x5c/0x190
- Modules linked in:
- CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.7.4 #2
- Hardware name: Atmel AT91SAM9
- [<c000efc8>] (unwind_backtrace) from [<c000ce74>] (show_stack+0x10/0x14)
- [<c000ce74>] (show_stack) from [<c0016be8>] (__warn+0xd8/0xf4)
- [<c0016be8>] (__warn) from [<c0016ca8>] (warn_slowpath_null+0x1c/0x24)
- [<c0016ca8>] (warn_slowpath_null) from [<c02a83cc>] (spidev_probe+0x5c/0x190)
- [<c02a83cc>] (spidev_probe) from [<c02a5348>] (spi_drv_probe+0x8c/0xa4)
- [<c02a5348>] (spi_drv_probe) from [<c0253620>] (driver_probe_device+0x1bc/0x294)
- [<c0253620>] (driver_probe_device) from [<c0251f1c>] (bus_for_each_drv+0x88/0x90)
- [<c0251f1c>] (bus_for_each_drv) from [<c02533d8>] (__device_attach+0x94/0xfc)
- [<c02533d8>] (__device_attach) from [<c0252a9c>] (bus_probe_device+0x24/0x78)
- [<c0252a9c>] (bus_probe_device) from [<c025127c>] (device_add+0x400/0x4e0)
- [<c025127c>] (device_add) from [<c02a5fe4>] (spi_add_device+0xe4/0x124)
- [<c02a5fe4>] (spi_add_device) from [<c02a63e8>] (of_register_spi_device+0x274/0x2d0)
- [<c02a63e8>] (of_register_spi_device) from [<c02a6958>] (spi_register_master+0x3a0/0x420)
- [<c02a6958>] (spi_register_master) from [<c02a6a0c>] (devm_spi_register_master+0x34/0x68)
- [<c02a6a0c>] (devm_spi_register_master) from [<c02aabd0>] (atmel_spi_probe+0x584/0x64c)
- [<c02aabd0>] (atmel_spi_probe) from [<c0254d58>] (platform_drv_probe+0x54/0x9c)
- [<c0254d58>] (platform_drv_probe) from [<c0253620>] (driver_probe_device+0x1bc/0x294)
- [<c0253620>] (driver_probe_device) from [<c0253770>] (__driver_attach+0x78/0xa4)
- [<c0253770>] (__driver_attach) from [<c0251e70>] (bus_for_each_dev+0x80/0x90)
- [<c0251e70>] (bus_for_each_dev) from [<c0252d38>] (bus_add_driver+0x164/0x1d4)
- [<c0252d38>] (bus_add_driver) from [<c0253f48>] (driver_register+0xa0/0xe0)
- [<c0253f48>] (driver_register) from [<c0009778>] (do_one_initcall+0x140/0x168)
- [<c0009778>] (do_one_initcall) from [<c070ad9c>] (kernel_init_freeable+0x170/0x1b0)
- [<c070ad9c>] (kernel_init_freeable) from [<c051ce60>] (kernel_init+0x8/0xe8)
- [<c051ce60>] (kernel_init) from [<c000a310>] (ret_from_fork+0x14/0x24)
- ---[ end trace 328108aa49f35003 ]---
- macb f802c000.ethernet: invalid hw address, using random
- libphy: MACB_mii_bus: probed
- SMSC LAN8710/LAN8720 f802c000.etherne:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=f802c000.etherne:00,
- irq=-1)
- macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 31 (ee:83:fe:52:ad:5b)
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-atmel: EHCI Atmel driver
- atmel-ehci 700000.ehci: EHCI Host Controller
- atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
- atmel-ehci 700000.ehci: irq 32, io mem 0x00700000
- atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 4.7.4 ehci_hcd
- usb usb1: SerialNumber: 700000.ehci
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 3 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci-atmel: OHCI Atmel driver
- usbcore: registered new interface driver cdc_acm
- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- usbcore: registered new interface driver usb-storage
- usbcore: registered new interface driver usbserial
- usbcore: registered new interface driver usbserial_generic
- usbserial: USB Serial support registered for generic
- usbcore: registered new interface driver ftdi_sio
- usbserial: USB Serial support registered for FTDI USB Serial Device
- usbcore: registered new interface driver pl2303
- usbserial: USB Serial support registered for pl2303
- udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers
- mousedev: PS/2 mouse device common for all mice
- rtc rtc0: alarm rollover not handled
- rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
- at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
- at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
- i2c /dev entries driver
- AT91: Starting after wakeup
- atmel_mci f0008000.mmc: version: 0x504
- atmel_mci f0008000.mmc: using dma0chan4 for DMA transfers
- atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- iio iio:device0: Resolution used: 10 bits
- iio iio:device0: ADC Touch screen is disabled.
- wm8731 0-004f: Assuming static MCLK
- 0-004f supply AVDD not found, using dummy regulator
- 0-004f supply HPVDD not found, using dummy regulator
- 0-004f supply DCVDD not found, using dummy regulator
- 0-004f supply DBVDD not found, using dummy regulator
- ssc: ssc0 platform device is missing
- Unable to parent ASoC SSC DAI on SSC: -19
- sam9x5-snd-wm8731 ahb:sound: ASoC: Failed to set SSC -19 for audio: 0
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- mmc0: host does not support reading read-only switch, assuming write-enable
- mmc0: new high speed SD card at address 0001
- mmcblk0: mmc0:0001 122 MiB
- mmcblk0: p1 p2
- mmcblk0: p2 size 1048576 extends beyond EOD, truncated
- at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01 00:00:03 UTC (1167609603)
- ALSA device list:
- #0: Loopback 1
- EXT4-fs (mmcblk0p2): Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF
- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- devtmpfs: mounted
- Freeing unused kernel memory: 224K (c070a000 - c0742000)
- This architecture does not have kernel memory protection.
- usb 1-1: new high-speed USB device number 2 using atmel-ehci
- EXT4-fs (mmcblk0p2): Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF
- EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
- usb 1-1: New USB device found, idVendor=148f, idProduct=5370
- usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-1: Product: 802.11 n WLAN
- usb 1-1: Manufacturer: Ralink
- usb 1-1: SerialNumber: 1.0
- Starting logging: OK
- Starting thd: Error opening '/dev/input/event*': No such file or directory
- OK
- read-only file system detected...done
- Starting system message bus: random: dbus-uuidgen: uninitialized urandom read (12 bytes read, 15 bits of entropy available)
- random: dbus-uuidgen: uninitialized urandom read (8 bytes read, 15 bits of entropy available)
- random: dbus-daemon: uninitialized urandom read (12 bytes read, 16 bits of entropy available)
- random: dbus-daemon: uninitialized urandom read (12 bytes read, 17 bits of entropy available)
- done
- Starting network: Waiting for interface wlan0 to appear............... timeout!
- run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1
- FAIL
- Starting dhcpcd...
- script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: WEXITSTATUS 127
- script_runreason: /lib/dhcpcd/dhcpcd-run-hooks: WEXITSTATUS 127
- no interfaces have a carrierIPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- forked to background, child pid 711
- No persistent location to store SSH host keys. New keys will be
- generated at each boot. Are you sure this is what you want to do?
- Starting dropbear sshd: random: dropbear: uninitialized urandom read (32 bytes read, 57 bits of entropy available)
- OK
- random: ssh-keygen: uninitialized urandom read (32 bytes read, 59 bits of entropy available)
- ssh-keygen: generating new host keys: RSA Could not save your public key in /etc/ssh/ssh_host_rsa_key.aswIp7jmxa: Read-only file system
- ssh-keygen: generating new host keys: DSA Could not save your public key in /etc/ssh/ssh_host_dsa_key.3nPji13S8B: Read-only file system
- ssh-keygen: generating new host keys: ECDSA Could not save your public key in /etc/ssh/ssh_host_ecdsa_key.Oof1w0Wk8J: Read-only file system
- ssh-keygen: generating new host keys: ED25519 Could not save your public key in /etc/ssh/ssh_host_ed25519_key.U1GBpQFCY8: Read-only file system
- Starting sshd: random: sshd: uninitialized urandom read (32 bytes read, 69 bits of entropy available)
- Could not load host key: /etc/ssh/ssh_host_rsa_key
- Could not load host key: /etc/ssh/ssh_host_dsa_key
- Could not load host key: /etc/ssh/ssh_host_ecdsa_key
- Could not load host key: /etc/ssh/ssh_host_ed25519_key
- sshd: no hostkeys available -- exiting.
- OK
- Starting shairport-sync: OK
- Welcome to BlueWi System
- BlueWi login: random: nonblocking pool is initialized
- iwconfig
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement