PLA_profile

PK       ! äi¿š–  –     custom_esun_copper_fast[general]
version = 4
name = esun_copper_fast
definition = fdmprinter

[metadata]
setting_version = 15
type = quality_changes
quality_type = draft

[values]
acceleration_enabled = True
adaptive_layer_height_enabled = True
adaptive_layer_height_threshold = 0.65
adaptive_layer_height_variation = 0.05
adaptive_layer_height_variation_step = 0.02
adhesion_type = skirt
bridge_settings_enabled = False
bridge_wall_min_length = 3
carve_multiple_volumes = True
jerk_enabled = True
layer_height = 0.65
layer_height_0 = 0.65
relative_extrusion = True
retraction_combing = infill
speed_slowdown_layers = 1
support_enable = False
travel_retract_before_outer_wall = False

PK       !
‡=-´  ´  %   custom_extruder_1_#2_esun_copper_fast[general]
version = 4
name = esun_copper_fast
definition = fdmprinter

[metadata]
position = 0
type = quality_changes
quality_type = draft
intent_category = default
setting_version = 15

[values]
acceleration_infill = 900
acceleration_print = 1100
acceleration_roofing = 1100
acceleration_travel = 2000
acceleration_wall_0 = 1200
alternate_extra_perimeter = False
brim_line_count = 4
coasting_enable = True
coasting_min_volume = 2
coasting_volume = 1.034
cool_fan_speed = 45.0
cool_fan_speed_0 = 15
cool_fan_speed_max = 100.0
cool_lift_head = True
cool_min_layer_time = 10
cool_min_speed = 20
fill_perimeter_gaps = nowhere
gradual_infill_step_height = 5
hole_xy_offset = 0.3
infill_angles = [0 ]
infill_before_walls = False
infill_enable_travel_optimization = True
infill_line_distance = 6
infill_line_width = 1
infill_material_flow = 102
infill_overlap = 8
infill_overlap_mm = =0.5 * (infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0
infill_pattern = gyroid
infill_sparse_density = 28
infill_support_enabled = False
infill_wipe_dist = 0
jerk_infill = 40
jerk_print = 40
jerk_travel = 0
jerk_travel_layer_0 = 0
jerk_wall_0 = 40
jerk_wall_x = 40
line_width = 1
material_final_print_temperature = 210
material_flow = 102
material_initial_print_temperature = 208
material_linear_advance_factor = 0.4
material_print_temperature = 210
meshfix_maximum_deviation = 0.05
meshfix_maximum_resolution = 0.3
meshfix_maximum_travel_resolution = 1.0
min_infill_area = 1
optimize_wall_printing_order = False
outer_inset_first = False
retract_at_layer_change = False
retraction_amount = 4.0
retraction_combing_max_distance = 80
retraction_count_max = 10
retraction_enable = False
retraction_extra_prime_amount = 1.2
retraction_extrusion_window = 100.0
retraction_hop_enabled = True
retraction_min_travel = 80
retraction_speed = 30
roofing_layer_count = 1
roofing_material_flow = 95
roofing_pattern = concentric
skin_line_width = 0.92
skin_material_flow = 95
skin_outline_count = 0
skin_overlap = 8
skin_overlap_mm = 0.1
skirt_brim_material_flow = 100
skirt_brim_minimal_length = 50
skirt_brim_speed = 50.0
skirt_gap = 0.15
skirt_line_count = 3
small_feature_max_length = =small_hole_max_size * math.pi
small_feature_speed_factor = 50
small_feature_speed_factor_0 = 50
small_hole_max_size = 15
speed_equalize_flow_enabled = True
speed_equalize_flow_max = 110
speed_infill = 100
speed_print = 110
speed_print_layer_0 = 60.0
speed_roofing = 40.0
speed_topbottom = 70.0
speed_travel = 110
speed_travel_layer_0 = 110
speed_wall = 45.0
speed_wall_0 = 35.0
speed_wall_x = 60.0
speed_z_hop = 60
support_angle = 69
support_conical_angle = 40
support_conical_enabled = True
support_fan_enable = True
support_infill_rate = 15
support_line_distance = 6
support_tower_diameter = 5.0
support_tower_maximum_supported_diameter = 5.0
support_z_distance = 0.2
top_bottom_pattern = lines
top_bottom_pattern_0 = lines
top_bottom_thickness = 1
top_layers = 3
top_skin_expand_distance = 4
travel_avoid_distance = 1
travel_avoid_other_parts = True
travel_avoid_supports = True
travel_compensate_overlapping_walls_0_enabled = True
travel_compensate_overlapping_walls_enabled = False
travel_compensate_overlapping_walls_x_enabled = True
wall_0_inset = 0.05
wall_0_material_flow = 100
wall_0_wipe_dist = 1
wall_line_count = 2
wall_line_width_0 = 1
wall_min_flow = 20
wall_x_material_flow = 90
wipe_move_distance = 2
wipe_repeat_count = 1
wipe_retraction_amount = 2.0
z_seam_corner = z_seam_corner_inner
z_seam_position = backright
z_seam_relative = True
z_seam_type = back
z_seam_x = =(0 if (z_seam_position == 'frontleft' or z_seam_position == 'left' or z_seam_position == 'backleft') else machine_width / 2 if (z_seam_position == 'front' or z_seam_position == 'back') else machine_width) - (machine_width / 2 if z_seam_relative or machine_center_is_zero else 0)
z_seam_y = =(0 if (z_seam_position == 'frontleft' or z_seam_position == 'front' or z_seam_position == 'frontright') else machine_depth / 2 if (z_seam_position == 'left' or z_seam_position == 'right') else machine_depth) - (machine_depth / 2 if z_seam_relative or machine_center_is_zero else 0)
zig_zaggify_infill = True

PK
        ! äi¿š–  –                   custom_esun_copper_fastPK
        !
‡=-´  ´  %             Ë  custom_extruder_1_#2_esun_copper_fastPK      ˜   Â