Guest User

Untitled

a guest
Jun 5th, 2018
120
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8. xloader chipid is: 0x36600110, start at 465ms.
  9. Build Date: Dec 6 2017, 15:31:59
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. Hikey960[5301] no need avs_init.
  18. ddr ft:0xf20332a3,mode:1 target:4
  19. UceLdOk
  20. ch 0 gt_errfail, STATUS:0x00000060
  21. ch 0 gdst_errfail, STATUS:0x00000040
  22. ch 1 gt_errfail, STATUS:0x00000060
  23. ch 1 gdst_errfail, STATUS:0x00000040
  24. ch 2 gt_errfail, STATUS:0x00000060
  25. ch 2 gdst_errfail, STATUS:0x00000040
  26. ch 3 gt_errfail, STATUS:0x00000060
  27. ch 3 gdst_errfail, STATUS:0x00000040
  28. timeout
  29. timeout
  30. timeout
  31. timeout
  32. density: 0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000
  33. ddr info 0x00000306
  34. 400M
  35. 685M
  36. 1067M
  37. C3R,V0x0000002c e:66
  38. C3R,V0x0000002d e:66
  39. C0R,V0x0000002d e:66
  40. C2R,V0x0000002d e:66
  41. C3R,V0x0000002e e:66
  42. C0R,V0x0000002e e:66
  43. C1R,V0x0000002e e:66
  44. C2R,V0x0000002e e:66
  45. C3R,V0x0000002f e:66
  46. C0R,V0x0000002f e:65
  47. C1R,V0x0000002f e:66
  48. C2R,V0x0000002f e:66
  49. C3R,V0x00000030 e:66
  50. C0R,V0x00000030 e:65
  51. C1R,V0x00000030 e:66
  52. C2R,V0x00000030 e:65
  53. C3R,V0x00000031 e:65
  54. 1244M
  55. 1866M
  56. C0R,V0x00000016 e:66
  57. C0R,V0x00000017 e:66
  58. C1R,V0x00000017 e:113
  59. C2R,V0x00000017 e:66
  60. C3R,V0x00000017 e:66
  61. iomcu_subsys_init
  62. boot_c0 PROFILE 4
  63. slave0 irq0:0x00000004
  64. slave1 irq0:0x00000004
  65. main: ******** Fastboot for Kirin *****************
  66. main: ******** Build Date: Jun 2 2017, 17:34:24 **
  67. main: ******** Fastboot start at 1825 ms **********
  68.  
  69. main: print soc_id computed in xloader phase, is below:
  70. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  71. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  72. led_alwayson: can't get dtb operators
  73. bbox: bbox_register_module_ops success.
  74. bfm: : >>>>>enter bfm_init
  75. bfm: : [disable_boot_fail_system] boot_fail_system state is 0
  76. clock: PLL Stat
  77. clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
  78. clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
  79. clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
  80. clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
  81. clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
  82. clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
  83. clock: clock init OK
  84. ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
  85. ufs: ufs current gear: 0x00000003
  86. ufs: ufs mphy reg 0x4A = 0x00000000
  87. ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
  88. ufs: UFS device manufacturerid = 0x000001ce
  89. ufs: UFS device: S******
  90. bfm: : >>>>>enter set_boot_stage
  91. bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
  92. bfm: : <<<<<exit set_boot_stage.
  93. storage: emmc_ops invalid
  94. storage: storage type is UFS
  95. bfm: : bfm system is disabled!
  96. storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
  97. bfm: : >>>>>enter set_boot_stage
  98. bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
  99. bfm: : <<<<<exit set_boot_stage.
  100. bfm: : >>>>>enter set_boot_stage
  101. bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
  102. bfm: : <<<<<exit set_boot_stage.
  103. ddr: current logic version is lpddr4 verison !!!
  104. ddr: ddr size is 3072MB
  105. bbox: register modid [0x81fff200]
  106. bbox: register exception succeed.
  107. bbox: register modid [0x81fff202]
  108. bbox: register exception succeed.
  109. bbox: register modid [0x81fff20b]
  110. bbox: register exception succeed.
  111. watchdog: Enable watchdog start
  112. boardid: [BDID]boardid: 5301
  113. gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
  114. load_kernel: register_update_dt_ops for usb!
  115. usb: [USBERR]random_serial: fastboot serial: 2323640321000000
  116. secureboot: Enter secboot_init: set pll efuse flag!
  117. secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
  118. bbox: register exception succeed.
  119. secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
  120. dtimage: Invalid dtb image header
  121. dtimage: dtb_init init fail
  122. load_kernel: register_update_dt_ops for led!
  123. reboot_reason: scsysstat_value is 0x00000000
  124. pmu: get_fdt_addr: can't get fdt operators
  125. pmu: pmu_get_fdt_addr failed
  126. pmu: pmu_mntn_record_dts_parse failed!
  127. bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
  128. reboot_reason: reboot_reason is AP_S_COLDBOOT
  129. reboot_reason: clear_reset_source in!
  130. reboot_reason: tmp =0x0effcc70
  131. power: get_chargerIC_type: can't get dtb operators
  132. power: get_coul_type: can't get dtb operators
  133. power: get coul_type failed!
  134. power: hi6421v500 register coulometer ops fail!
  135. no_module: [hi6523_get_config_info]: can't get dtb operators
  136. no_module: [hi6523_start_charging_by_init_params]: can't get dtb operators
  137. max77813: get_buckboost_type: can't get dtb operators
  138. max77813: get dts buckboost type fail!
  139. cpu_buck: pmu type3 not registered
  140. cpu_buck: Bad cpu buck info:1
  141. bbox: failed to get dtimage operators
  142. mntn: tele_mntn_stat_point_init: can not bbox_ops !
  143. mntn: tele_mntn_m3_wdt_config: get dtb_ops failed!
  144. mntn: mntn init
  145. mntndump: [MNTN]:failed to get dtimage operators
  146. mntndump: mntn_dump_init failed
  147. mntndump: get_mntn_dump_addr:mid[2] is not init
  148. mntn: kernel dump is not available
  149. mntn: reboot_type is 0
  150. mntn:
  151. no need to dump_mem...
  152. mntn: enter [registe_pstore_ramoops_dump]
  153. mntndump: get_mntn_dump_addr:mid[5] is not init
  154. mntn: no mdump_pstore info
  155. mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
  156. uart_cfg: [MNTN]:failed to get dtimage operators
  157. uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
  158. uart_cfg: module_idx 2, uart_no 6
  159. uart_cfg: odule_idx 11, uart_no 15
  160. uart_cfg: module_idx 2, uart_no 6
  161. uart_cfg: 15
  162. uart_cfg: [get_uart_board_type]: can't get dtb operators
  163. uart_cfg: boardid: 5301 use uart port: 6
  164. pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
  165. ddr: current logic version is lpddr4 verison !!!
  166. display: [display]get_detect_type: failed to get dtimage operators!
  167. display: lcd:no lcd detect_type
  168. no_module: [LOGO] get_logo_buffer_from_dtsi: failed to get dtimage operators
  169. no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
  170. display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
  171. display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
  172. bfm: : >>>>>enter set_boot_stage
  173. bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
  174. bfm: : <<<<<exit set_boot_stage.
  175. display: [display]get_dts_value: failed to get dtimage operators!
  176. display: [display]get_dts_value: failed to get dtimage operators!
  177. display: get lm36923_support failed!
  178. Audio_codec: [audio]:failed to get dtimage operators
  179. load_teeos: failed to get dtimage operators, change fb dts failed
  180. load_teeos: failed to get dtimage operators, change fb dts failed
  181. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  182. mem_cfg: load_nomap_mem_config: get_operators fail, 00000000 1ae974d0 1ae6e820
  183. bfm: : >>>>>enter set_boot_stage
  184. bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
  185. bfm: : <<<<<exit set_boot_stage.
  186. preboot: load dtimage error, enter fastboot mode!
  187. bfm: : bfm_to_mntn_modid: size is 8
  188. bfm: : >>>>>enter boot_fail_err
  189. bfm: : boot_fail_err: bootErrNo is 0x02010004, mntnModID is 0x81fff207, mntnRBReason is 0x0000007b,1
  190. bbox: register modid [0x81fff207]
  191. bbox: register exception succeed.
  192. bbox: -------show exception info begin
  193. bbox: modid: [0x81fff207]
  194. bbox: reboot_pri: [0x00000002]
  195. bbox: dump_mod_mask: [0x0000000000000003]
  196. bbox: reset_mod_mask: [0x0000000000000003]
  197. bbox: from_module: [0x0000000000000001]
  198. bbox: reentrant: [0x0f00da01]
  199. bbox: exce_type: [0x0000007b]
  200. bbox: reserve_u64: [0x0000000000000000]
  201. bbox: reserve_p: [0x00000000]
  202. bbox: -------show exception info end
  203. bbox: dump module [0000000000000001] start!
  204. bbox: modid is 0x81fff207, etype is 0x0000007b, mod_group_id is 0x0000000000000001
  205. bbox: modid:[0x81fff207], coreid:[0x0000000000000001]
  206. bbox: bbox_dump_done current mask:[0x0000000000000001]
  207. bbox: dump module [0000000000000001] end!
  208. bbox: Skip module [0x0000000000000001]
  209. bbox: bbox_notify_module_dump done. return mask=[0x0000000000000001]
  210. bbox: current mask:[0x0000000000000001]
  211. bbox: all dump done
  212. bbox: save_log_to_dfx():462:storage_read fail[-1]
  213. bbox: p_module_ops->s_mod_group_id is [0x0000000000000001]
  214. bbox: reset module [0x0000000000000001] start!
  215. bbox: modid is 0x81fff207, etype is 0x0000007b, mod_group_id is 0x0000000000000001
  216. bbox: reset module [0x0000000000000001] end!
  217. bfm: : <<<<<exit boot_fail_err.
  218. watchdog: Disable watchdog start
  219. bfm: : [disable_boot_fail_system] boot_fail_system state is 0
  220. rescue: ^^^^^^^^^[rescue_init] ok !
  221. usbloader: bootmode is 4
RAW Paste Data