Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.12.5-gentoo (root@kombajn) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #3 SMP Sat Dec 14 18:54:58 CET 2013
- [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.12.5-c02-gentoo root=/dev/sda5 ro nomodeset init=/usr/lib/systemd/systemd video=vesafb:mtrr:3,ywrap vga=795
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Acer Aspire V3-772/VA70_HW, BIOS V1.12 09/19/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-combining
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
- [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
- [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
- [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
- [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
- [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
- [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
- [ 0.000000] 8 base 045F600000 mask 7FFFE00000 uncachable
- [ 0.000000] 9 base 045F800000 mask 7FFF800000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
- [ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
- [ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
- [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
- [ 0.000000] BRK [0x02104000, 0x02104fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
- [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
- [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
- [ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x94caffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0x94bfffff] page 2M
- [ 0.000000] [mem 0x94c00000-0x94caffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x960b0000-0x9a6befff]
- [ 0.000000] [mem 0x960b0000-0x961fffff] page 4k
- [ 0.000000] [mem 0x96200000-0x9a5fffff] page 2M
- [ 0.000000] [mem 0x9a600000-0x9a6befff] page 4k
- [ 0.000000] BRK [0x02105000, 0x02105fff] PGTABLE
- [ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
- [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
- [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
- [ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 ACRSYS ACRPRDCT 00000001 01000013)
- [ 0.000000] ACPI: FACP 000000009aff5000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DSDT 000000009afde000 13FE7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.000000] ACPI: FACS 000000009afaf000 00040
- [ 0.000000] ACPI: ECDT 000000009affd000 000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: UEFI 000000009affc000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: FPDT 000000009affa000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009aff8000 00538 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009aff7000 00ABA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: ASF! 000000009aff6000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: HPET 000000009aff4000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: APIC 000000009aff3000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: MCFG 000000009aff2000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afdc000 013A4 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afdb000 00172 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: BOOT 000000009afda000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: ASPT 000000009afd9000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DBGP 000000009afd8000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afd4000 03352 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 000000009afd0000 0362A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45f5fffff]
- [ 0.000000] NODE_DATA [mem 0x45f5f9000-0x45f5fcfff]
- [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0x94caffff]
- [ 0.000000] node 0: [mem 0x960b0000-0x9a6befff]
- [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
- [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
- [ 0.000000] On node 0 totalpages: 4163676
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 9739 pages used for memmap
- [ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
- [ 0.000000] Normal zone: 55256 pages used for memmap
- [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
- [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88045f200000 s79808 r8192 d22592 u262144
- [ 0.000000] pcpu-alloc: s79808 r8192 d22592 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098596
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.12.5-c02-gentoo root=/dev/sda5 ro nomodeset init=/usr/lib/systemd/systemd video=vesafb:mtrr:3,ywrap vga=795
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 16307940K/16654704K available (8199K kernel code, 866K rwdata, 2920K rodata, 1168K init, 996K bss, 346764K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 2195.011 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.02 BogoMIPS (lpj=2195011)
- [ 0.000007] pid_max: default: 32768 minimum: 301
- [ 0.000028] Security Framework initialized
- [ 0.000946] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.003719] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.004908] Mount-cache hash table entries: 256
- [ 0.005055] Initializing cgroup subsys freezer
- [ 0.005077] CPU: Physical Processor ID: 0
- [ 0.005079] CPU: Processor Core ID: 0
- [ 0.005083] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.006038] mce: CPU supports 9 MCE banks
- [ 0.006053] CPU0: Thermal monitoring enabled (TM1)
- [ 0.006066] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
- tlb_flushall_shift: 6
- [ 0.006197] Freeing SMP alternatives memory: 32K (ffffffff81ffe000 - ffffffff82006000)
- [ 0.006201] ACPI: Core revision 20130725
- [ 0.016593] ACPI: All ACPI Tables successfully acquired
- [ 0.017939] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.027957] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (fam: 06, model: 3c, stepping: 03)
- [ 0.027965] TSC deadline timer enabled
- [ 0.027972] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
- [ 0.027981] ... version: 3
- [ 0.027983] ... bit width: 48
- [ 0.027984] ... generic registers: 4
- [ 0.027986] ... value mask: 0000ffffffffffff
- [ 0.027988] ... max period: 0000ffffffffffff
- [ 0.027990] ... fixed-purpose events: 3
- [ 0.027992] ... event mask: 000000070000000f
- [ 0.028168] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
- [ 0.128030] Brought up 8 CPUs
- [ 0.128036] smpboot: Total of 8 processors activated (35120.17 BogoMIPS)
- [ 0.135137] devtmpfs: initialized
- [ 0.135304] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
- [ 0.135494] NET: Registered protocol family 16
- [ 0.135581] cpuidle: using governor ladder
- [ 0.135583] cpuidle: using governor menu
- [ 0.135616] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.135619] ACPI: bus type PCI registered
- [ 0.135656] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.135660] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.156975] PCI: Using configuration type 1 for base access
- [ 0.158140] bio: create slab <bio-0> at 0
- [ 0.158260] ACPI: Added _OSI(Module Device)
- [ 0.158262] ACPI: Added _OSI(Processor Device)
- [ 0.158264] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.158266] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.160345] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.162447] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.172088] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.173379] ACPI: SSDT 000000009ae58c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
- [ 0.173903] ACPI: Dynamic OEM Table Load:
- [ 0.173906] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
- [ 0.178296] ACPI: SSDT 000000009ae58618 005AA (v01 PmRef ApIst 00003000 INTL 20120518)
- [ 0.178889] ACPI: Dynamic OEM Table Load:
- [ 0.178892] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120518)
- [ 0.183176] ACPI: SSDT 000000009ae57d98 00119 (v01 PmRef ApCst 00003000 INTL 20120518)
- [ 0.183698] ACPI: Dynamic OEM Table Load:
- [ 0.183701] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120518)
- [ 0.189320] ACPI: Interpreter enabled
- [ 0.189328] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
- [ 0.189336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
- [ 0.189357] ACPI: (supports S0 S3 S4 S5)
- [ 0.189359] ACPI: Using IOAPIC for interrupt routing
- [ 0.189384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.189560] ACPI: No dock devices found.
- [ 0.202696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.202912] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.203263] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
- [ 0.203697] PCI host bridge to bus 0000:00
- [ 0.203701] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.203703] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.203706] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.203709] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.203712] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
- [ 0.203721] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
- [ 0.203872] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.203906] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.204023] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.204059] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
- [ 0.204070] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
- [ 0.204077] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.204082] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
- [ 0.204227] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 0.204235] pci 0000:00:03.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
- [ 0.204395] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.204413] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
- [ 0.204471] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.204575] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.204604] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.204623] pci 0000:00:16.0: reg 0x10: [mem 0xd3618000-0xd361800f 64bit]
- [ 0.204684] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.204820] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.204840] pci 0000:00:1a.0: reg 0x10: [mem 0xd361d000-0xd361d3ff]
- [ 0.204924] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.205040] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.205070] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.205083] pci 0000:00:1b.0: reg 0x10: [mem 0xd3614000-0xd3617fff 64bit]
- [ 0.205145] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.205254] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.205280] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.205343] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.205449] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.205474] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- [ 0.205537] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.205643] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.205667] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
- [ 0.205729] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.205836] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.205868] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.205888] pci 0000:00:1d.0: reg 0x10: [mem 0xd361c000-0xd361c3ff]
- [ 0.205973] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.206088] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.206116] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
- [ 0.206338] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
- [ 0.206354] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
- [ 0.206361] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
- [ 0.206368] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
- [ 0.206375] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
- [ 0.206382] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
- [ 0.206389] pci 0000:00:1f.2: reg 0x24: [mem 0xd361b000-0xd361b7ff]
- [ 0.206425] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.206547] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.206561] pci 0000:00:1f.3: reg 0x10: [mem 0xd3619000-0xd36190ff 64bit]
- [ 0.206580] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
- [ 0.206744] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
- [ 0.206752] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
- [ 0.206760] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 0.206769] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
- [ 0.206774] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
- [ 0.206780] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
- [ 0.206818] pci 0000:01:00.0: System wakeup disabled by ACPI
- [ 0.208181] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.208185] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.208187] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
- [ 0.208190] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.208251] pci 0000:07:00.0: [10ec:5209] type 00 class 0xff0000
- [ 0.208267] pci 0000:07:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
- [ 0.208389] pci 0000:07:00.0: supports D1 D2
- [ 0.208391] pci 0000:07:00.0: PME# supported from D1 D2 D3hot
- [ 0.208415] pci 0000:07:00.0: System wakeup disabled by ACPI
- [ 0.210190] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 0.210194] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.210197] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
- [ 0.210202] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.210261] pci 0000:0d:00.0: [168c:0034] type 00 class 0x028000
- [ 0.210283] pci 0000:0d:00.0: reg 0x10: [mem 0xd3500000-0xd357ffff 64bit]
- [ 0.210335] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
- [ 0.210388] pci 0000:0d:00.0: supports D1 D2
- [ 0.210390] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.210412] pci 0000:0d:00.0: System wakeup disabled by ACPI
- [ 0.212192] pci 0000:00:1c.2: PCI bridge to [bus 0d]
- [ 0.212198] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
- [ 0.212296] pci 0000:0e:00.0: [14e4:1692] type 00 class 0x020000
- [ 0.212319] pci 0000:0e:00.0: reg 0x10: [mem 0xd3400000-0xd340ffff 64bit]
- [ 0.212443] pci 0000:0e:00.0: PME# supported from D3hot D3cold
- [ 0.212469] pci 0000:0e:00.0: System wakeup disabled by ACPI
- [ 0.214228] pci 0000:00:1c.3: PCI bridge to [bus 0e]
- [ 0.214234] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
- [ 0.214261] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- [ 0.214978] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.215024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.215067] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.215109] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.215150] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.215197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.215240] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.215282] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.215705] ACPI: Enabled 4 GPEs in block 00 to 3F
- [ 0.215712] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.215775] Found 1 acpi root devices
- [ 0.215819] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
- [ 0.215866] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.215871] vgaarb: loaded
- [ 0.215873] vgaarb: bridge control possible 0000:00:02.0
- [ 0.215919] SCSI subsystem initialized
- [ 0.215953] libata version 3.00 loaded.
- [ 0.215969] ACPI: bus type USB registered
- [ 0.215981] usbcore: registered new interface driver usbfs
- [ 0.215990] usbcore: registered new interface driver hub
- [ 0.216006] usbcore: registered new device driver usb
- [ 0.216021] pps_core: LinuxPPS API ver. 1 registered
- [ 0.216023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.216028] PTP clock support registered
- [ 0.216432] wmi: Mapper loaded
- [ 0.216443] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.216445] PCI: Using ACPI for IRQ routing
- [ 0.222159] PCI: pci_cache_line_size set to 64 bytes
- [ 0.222201] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
- [ 0.222202] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
- [ 0.222204] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
- [ 0.222207] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
- [ 0.222208] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
- [ 0.222273] Bluetooth: Core ver 2.16
- [ 0.222279] NET: Registered protocol family 31
- [ 0.222281] Bluetooth: HCI device and connection manager initialized
- [ 0.222283] Bluetooth: HCI socket layer initialized
- [ 0.222286] Bluetooth: L2CAP socket layer initialized
- [ 0.222290] Bluetooth: SCO socket layer initialized
- [ 0.222341] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.222446] NetLabel: Initializing
- [ 0.222450] NetLabel: domain hash size = 128
- [ 0.222452] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.222471] NetLabel: unlabeled traffic allowed by default
- [ 0.222539] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.222546] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.224575] Switched to clocksource hpet
- [ 0.228733] pnp: PnP ACPI init
- [ 0.228740] ACPI: bus type PNP registered
- [ 0.228765] pnp 00:00: [dma 4]
- [ 0.228778] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.228794] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.228892] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.228928] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.228956] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.228959] system 00:04: [io 0xffff] has been reserved
- [ 0.228962] system 00:04: [io 0xffff] has been reserved
- [ 0.228965] system 00:04: [io 0xffff] has been reserved
- [ 0.228968] system 00:04: [io 0x1800-0x18fe] could not be reserved
- [ 0.228970] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.228974] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.229007] system 00:05: [io 0x0800-0x087f] has been reserved
- [ 0.229010] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.229028] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.229062] system 00:07: [io 0x1854-0x1857] has been reserved
- [ 0.229065] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.229099] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.229121] pnp 00:09: Plug and Play ACPI device, IDs SYN1b66 SYN1b00 SYN0002 PNP0f13 (active)
- [ 0.229235] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.229239] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.229242] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.229245] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.229248] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.229251] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.229254] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.229257] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.229260] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.229263] system 00:0a: [mem 0x9fa20000-0x9fa20fff] has been reserved
- [ 0.229265] system 00:0a: [mem 0x9fa10000-0x9fa1ffff] has been reserved
- [ 0.229269] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.229714] pnp: PnP ACPI: found 11 devices
- [ 0.229716] ACPI: bus type PNP unregistered
- [ 0.234256] pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.234284] pci 0000:00:1c.2: BAR 9: assigned [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234288] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
- [ 0.234292] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.234295] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
- [ 0.234299] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
- [ 0.234303] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.234308] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 0.234312] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.234317] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd1ffffff]
- [ 0.234322] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.234329] pci 0000:0d:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
- [ 0.234332] pci 0000:00:1c.2: PCI bridge to [bus 0d]
- [ 0.234337] pci 0000:00:1c.2: bridge window [mem 0xd3500000-0xd35fffff]
- [ 0.234342] pci 0000:00:1c.2: bridge window [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234349] pci 0000:00:1c.3: PCI bridge to [bus 0e]
- [ 0.234354] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
- [ 0.234363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.234364] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.234366] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.234367] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
- [ 0.234369] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
- [ 0.234370] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
- [ 0.234371] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
- [ 0.234373] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
- [ 0.234374] pci_bus 0000:07: resource 1 [mem 0xd1000000-0xd1ffffff]
- [ 0.234376] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
- [ 0.234377] pci_bus 0000:0d: resource 1 [mem 0xd3500000-0xd35fffff]
- [ 0.234379] pci_bus 0000:0d: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
- [ 0.234380] pci_bus 0000:0e: resource 1 [mem 0xd3400000-0xd34fffff]
- [ 0.234406] NET: Registered protocol family 2
- [ 0.234634] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- [ 0.234927] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.235040] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.235056] TCP: reno registered
- [ 0.235075] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.235124] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.235201] NET: Registered protocol family 1
- [ 0.235273] RPC: Registered named UNIX socket transport module.
- [ 0.235276] RPC: Registered udp transport module.
- [ 0.235278] RPC: Registered tcp transport module.
- [ 0.235280] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.235287] pci 0000:00:02.0: Boot video device
- [ 0.236605] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
- [ 0.236608] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
- [ 0.236752] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.247807] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.258721] PCI: CLS 64 bytes, default 64
- [ 0.258828] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.258833] software IO TLB [mem 0x966bf000-0x9a6bf000] (64MB) mapped at [ffff8800966bf000-ffff88009a6befff]
- [ 0.259031] Simple Boot Flag at 0x44 set to 0x1
- [ 0.259480] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259488] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259495] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259502] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259508] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259516] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259525] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259534] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
- [ 0.259556] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.259560] Scanning for low memory corruption every 60 seconds
- [ 0.260253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.261128] VFS: Disk quotas dquot_6.5.2
- [ 0.261160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.261559] NFS: Registering the id_resolver key type
- [ 0.261566] Key type id_resolver registered
- [ 0.261568] Key type id_legacy registered
- [ 0.261685] fuse init (API version 7.22)
- [ 0.261739] msgmni has been set to 31851
- [ 0.261847] cryptomgr_test (58) used greatest stack depth: 7144 bytes left
- [ 0.261871] cryptomgr_test (59) used greatest stack depth: 6896 bytes left
- [ 0.262128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.262132] io scheduler noop registered
- [ 0.262151] io scheduler cfq registered (default)
- [ 0.262268] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.262384] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.262506] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
- [ 0.262629] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
- [ 0.262694] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
- [ 0.262698] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262701] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
- [ 0.262714] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 0.262717] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262721] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 0.262733] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
- [ 0.262736] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262740] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
- [ 0.262752] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 0.262755] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
- [ 0.262760] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
- [ 0.262763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.262788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.263139] Non-volatile memory driver v1.3
- [ 0.263142] Linux agpgart interface v0.103
- [ 0.263168] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 0.263170] vesafb: scrolling: redraw
- [ 0.263172] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.263178] mtrr: no more MTRRs available
- [ 0.263628] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c80000, using 5120k, total 5120k
- [ 0.266888] Console: switching to colour frame buffer device 160x64
- [ 0.270013] fb0: VESA VGA frame buffer device
- [ 0.270037] intel_idle: MWAIT substates: 0x42120
- [ 0.270038] intel_idle: v0.4 model 0x3C
- [ 0.270039] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.274677] ACPI: AC Adapter [AC0] (on-line)
- [ 0.274768] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0
- [ 0.274808] ACPI: Power Button [PWRB]
- [ 0.274845] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input1
- [ 0.274883] ACPI: Sleep Button [SLPB]
- [ 0.274926] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
- [ 0.275677] ACPI: Lid Switch [LID]
- [ 0.275717] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.275749] ACPI: Power Button [PWRF]
- [ 0.275829] ACPI: Requesting acpi_cpufreq
- [ 0.275920] kworker/u16:0 (71) used greatest stack depth: 5816 bytes left
- [ 0.276681] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.276708] ACPI: Thermal Zone [THRM] (52 C)
- [ 0.276750] [drm] Initialized drm 1.1.0 20060810
- [ 0.277265] loop: module loaded
- [ 0.277322] ahci 0000:00:1f.2: version 3.0
- [ 0.277419] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
- [ 0.277465] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x34 impl SATA mode
- [ 0.277500] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 0.277534] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.280941] scsi0 : ahci
- [ 0.281003] scsi1 : ahci
- [ 0.281070] scsi2 : ahci
- [ 0.281137] scsi3 : ahci
- [ 0.281203] scsi4 : ahci
- [ 0.281268] scsi5 : ahci
- [ 0.281301] ata1: DUMMY
- [ 0.281312] ata2: DUMMY
- [ 0.281325] ata3: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b200 irq 44
- [ 0.281356] ata4: DUMMY
- [ 0.281368] ata5: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b300 irq 44
- [ 0.281399] ata6: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b380 irq 44
- [ 0.281511] tg3.c:v3.133 (Jul 29, 2013)
- [ 0.281958] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.290293] libphy: tg3 mdio bus: probed
- [ 0.295066] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 54:be:f7:76:77:ed
- [ 0.296120] tg3 0000:0e:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=e00:01)
- [ 0.297186] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 0.298246] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 0.299350] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 0.300404] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 0.301476] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.302542] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.312923] ath: EEPROM regdomain: 0x6c
- [ 0.312924] ath: EEPROM indicates we should expect a direct regpair map
- [ 0.312927] ath: Country alpha2 being used: 00
- [ 0.312927] ath: Regpair used: 0x6c
- [ 0.313396] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 0.313491] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90012200000, irq=18
- [ 0.314629] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.315708] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.315710] ehci-pci: EHCI PCI platform driver
- [ 0.316868] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 0.316874] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.317973] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.319052] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.320110] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.320113] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.320126] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.324019] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.324021] ehci-pci 0000:00:1a.0: supports USB remote wakeup
- [ 0.324032] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd361d000
- [ 0.325084] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.330736] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.331844] usb usb1: default language 0x0409
- [ 0.331854] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.331856] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.332906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.333958] usb usb1: Product: EHCI Host Controller
- [ 0.335003] usb usb1: Manufacturer: Linux 3.12.5-gentoo ehci_hcd
- [ 0.336050] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.337228] usb usb1: usb_probe_device
- [ 0.337232] usb usb1: configuration #1 chosen from 1 choice
- [ 0.337242] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.337258] hub 1-0:1.0: usb_probe_interface
- [ 0.337260] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.337262] hub 1-0:1.0: USB hub found
- [ 0.338309] hub 1-0:1.0: 2 ports detected
- [ 0.339333] hub 1-0:1.0: standalone hub
- [ 0.339335] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.339336] hub 1-0:1.0: individual port over-current protection
- [ 0.339337] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.339342] hub 1-0:1.0: local power source is good
- [ 0.339400] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.339401] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.339552] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 0.339557] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.340672] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.341712] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.342723] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.342726] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.342741] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.346625] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.346626] ehci-pci 0000:00:1d.0: supports USB remote wakeup
- [ 0.346641] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd361c000
- [ 0.347653] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.352760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.353812] usb usb2: default language 0x0409
- [ 0.353822] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.353824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.354811] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.355785] usb usb2: Product: EHCI Host Controller
- [ 0.356741] usb usb2: Manufacturer: Linux 3.12.5-gentoo ehci_hcd
- [ 0.357687] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.358740] usb usb2: usb_probe_device
- [ 0.358744] usb usb2: configuration #1 chosen from 1 choice
- [ 0.358755] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.358770] hub 2-0:1.0: usb_probe_interface
- [ 0.358771] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.358774] hub 2-0:1.0: USB hub found
- [ 0.359698] hub 2-0:1.0: 2 ports detected
- [ 0.360604] hub 2-0:1.0: standalone hub
- [ 0.360606] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.360607] hub 2-0:1.0: individual port over-current protection
- [ 0.360608] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.360614] hub 2-0:1.0: local power source is good
- [ 0.360675] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.360676] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.360728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.361650] ohci_hcd: block sizes: ed 80 td 96
- [ 0.361654] ohci-pci: OHCI PCI platform driver
- [ 0.362577] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.363520] usbcore: registered new interface driver usblp
- [ 0.364452] usbcore: registered new interface driver usb-storage
- [ 0.365387] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.368619] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.370781] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.371700] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.372629] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.373550] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.374472] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.375478] mousedev: PS/2 mouse device common for all mice
- [ 0.376813] rtc_cmos 00:06: RTC can wake from S4
- [ 0.377889] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 0.378866] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.379943] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
- [ 0.380963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.382101] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
- [ 0.383152] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.384278] usbcore: registered new interface driver usbhid
- [ 0.385311] usbhid: USB HID core driver
- [ 0.386338] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 0.387375] acer_wmi: Function bitmap for Communication Button: 0x801
- [ 0.388521] acer_wmi: Brightness must be controlled by acpi video driver
- [ 0.389633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.397557] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
- [ 0.398639] input: Acer WMI hotkeys as /devices/virtual/input/input6
- [ 0.400046] input: Acer BMA150 accelerometer as /devices/virtual/input/input7
- [ 0.409359] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.412982] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.414580] hda-i915: get_power symbol get fail
- [ 0.415613] hda-intel Error request power-well from i915
- [ 0.415641] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 0.428192] Netfilter messages via NETLINK v0.30.
- [ 0.429225] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.430307] ctnetlink v0.93: registering with nfnetlink.
- [ 0.431823] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.432943] TCP: cubic registered
- [ 0.433965] Initializing XFRM netlink socket
- [ 0.435064] NET: Registered protocol family 10
- [ 0.436230] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.437791] sit: IPv6 over IPv4 tunneling driver
- [ 0.438811] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.438821] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 0.438897] NET: Registered protocol family 17
- [ 0.439927] Key type dns_resolver registered
- [ 0.441152] registered taskstats version 1
- [ 0.442596] console [netcon0] enabled
- [ 0.443612] netconsole: network logging started
- [ 0.446044] PM: Hibernation image not present or could not be loaded.
- [ 0.446046] ALSA device list:
- [ 0.447056] #1: HDA Intel PCH at 0xd3614000 irq 45
- [ 0.459859] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.459867] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.538999] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.539061] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.586000] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.587060] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.588109] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.589720] ata6.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
- [ 0.590127] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.590130] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.591468] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.593127] ata5.00: ATA-8: PLEXTOR PX-128M5M, 1.03, max UDMA/133
- [ 0.594859] ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 0.596721] ata3.00: ATAPI: HL-DT-ST DVDRAM GT90N, 1.00, max UDMA/133
- [ 0.598724] ata6.00: configured for UDMA/133
- [ 0.600583] ata5.00: configured for UDMA/133
- [ 0.603885] ata3.00: configured for UDMA/133
- [ 0.609200] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.610235] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.613197] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT90N 1.00 PQ: 0 ANSI: 5
- [ 0.620816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.621879] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.623077] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 0.623163] sr 2:0:0:0: Attached scsi generic sg0 type 5
- [ 0.624411] scsi 4:0:0:0: Direct-Access ATA PLEXTOR PX-128M5 1.03 PQ: 0 ANSI: 5
- [ 0.625572] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 0.625599] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 0.625733] scsi 5:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
- [ 0.625822] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 0.625824] sd 5:0:0:0: [sdb] 4096-byte physical blocks
- [ 0.625841] sd 5:0:0:0: Attached scsi generic sg2 type 0
- [ 0.625843] sd 5:0:0:0: [sdb] Write Protect is off
- [ 0.625844] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.625853] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.634340] sd 4:0:0:0: [sda] Write Protect is off
- [ 0.635417] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.635430] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.637398] sda: sda1 sda2 < sda5 sda6 sda7 >
- [ 0.638756] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 0.641094] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.643080] sdb: sdb1 < sdb5 >
- [ 0.644288] sd 5:0:0:0: [sdb] Attached SCSI disk
- [ 0.693356] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.693362] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.756600] usb 1-1: udev 2, busnum 1, minor = 1
- [ 0.756604] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
- [ 0.757682] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.758800] usb 1-1: usb_probe_device
- [ 0.758803] usb 1-1: configuration #1 chosen from 1 choice
- [ 0.758977] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 0.759004] hub 1-1:1.0: usb_probe_interface
- [ 0.759006] hub 1-1:1.0: usb_probe_interface - got id
- [ 0.759009] hub 1-1:1.0: USB hub found
- [ 0.760229] hub 1-1:1.0: 6 ports detected
- [ 0.761264] hub 1-1:1.0: standalone hub
- [ 0.761265] hub 1-1:1.0: individual port power switching
- [ 0.761266] hub 1-1:1.0: individual port over-current protection
- [ 0.761268] hub 1-1:1.0: Single TT
- [ 0.761269] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.761271] hub 1-1:1.0: power on to power good time: 0ms
- [ 0.761603] hub 1-1:1.0: local power source is good
- [ 0.761841] hub 1-1:1.0: enabling power on all ports
- [ 0.762613] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.762626] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.809448] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.810501] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.813476] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.813482] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.862457] hub 1-1:1.0: port 1: status 0101 change 0001
- [ 0.864271] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 0.916581] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.916587] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.962382] usb 1-1: link qh256-0001/ffff88044c613380 start 1 [1/0 us]
- [ 0.979825] usb 2-1: udev 2, busnum 2, minor = 129
- [ 0.979829] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
- [ 0.980875] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.981973] usb 2-1: usb_probe_device
- [ 0.981976] usb 2-1: configuration #1 chosen from 1 choice
- [ 0.982069] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 0.982089] hub 2-1:1.0: usb_probe_interface
- [ 0.982091] hub 2-1:1.0: usb_probe_interface - got id
- [ 0.982094] hub 2-1:1.0: USB hub found
- [ 0.983189] hub 2-1:1.0: 8 ports detected
- [ 0.984202] hub 2-1:1.0: standalone hub
- [ 0.984204] hub 2-1:1.0: individual port power switching
- [ 0.984205] hub 2-1:1.0: individual port over-current protection
- [ 0.984206] hub 2-1:1.0: Single TT
- [ 0.984208] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.984209] hub 2-1:1.0: power on to power good time: 0ms
- [ 0.984442] hub 2-1:1.0: local power source is good
- [ 0.984746] hub 2-1:1.0: enabling power on all ports
- [ 0.985841] hub 1-1:1.0: state 7 ports 6 chg 0002 evt 0000
- [ 0.985935] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 0.996589] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.009624] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.010672] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.058653] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
- [ 1.086284] hub 2-1:1.0: port 6: status 0101 change 0001
- [ 1.182280] usb 1-1.1: skipped 1 descriptor after configuration
- [ 1.182284] usb 1-1.1: skipped 6 descriptors after interface
- [ 1.182286] usb 1-1.1: skipped 1 descriptor after endpoint
- [ 1.182288] usb 1-1.1: skipped 17 descriptors after interface
- [ 1.183653] usb 1-1.1: default language 0x0409
- [ 1.186583] usb 2-1: link qh256-0001/ffff88044c613500 start 1 [1/0 us]
- [ 1.191789] usb 1-1.1: udev 3, busnum 1, minor = 2
- [ 1.191794] usb 1-1.1: New USB device found, idVendor=1bcf, idProduct=2c55
- [ 1.192859] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.193908] usb 1-1.1: Product: HD WebCam
- [ 1.194947] usb 1-1.1: Manufacturer: NC.21411.01N33605E86LM0002
- [ 1.196068] usb 1-1.1: usb_probe_device
- [ 1.196071] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 1.196147] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 1.218818] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.219903] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.262680] tsc: Refined TSC clocksource calibration: 2194.917 MHz
- [ 1.265778] usb 1-1.1: adding 1-1.1:1.1 (config #1, interface 1)
- [ 1.265817] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 1.265987] hub 2-1:1.0: state 7 ports 8 chg 0040 evt 0000
- [ 1.266112] hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
- [ 1.276872] hub 2-1:1.0: port 6 not reset yet, waiting 10ms
- [ 1.338932] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
- [ 1.350944] hub 2-1:1.0: port 6 not reset yet, waiting 10ms
- [ 1.419081] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.420210] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.426520] usb 2-1.6: string descriptor 0 read error: -22
- [ 1.427665] usb 2-1.6: udev 3, busnum 2, minor = 130
- [ 1.427667] usb 2-1.6: New USB device found, idVendor=0489, idProduct=e04e
- [ 1.428791] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.430001] usb 2-1.6: usb_probe_device
- [ 1.430004] usb 2-1.6: configuration #1 chosen from 1 choice
- [ 1.430257] usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0)
- [ 1.430293] usb 2-1.6: adding 2-1.6:1.1 (config #1, interface 1)
- [ 1.430330] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0040
- [ 2.067972] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00423/0x840300/0x126c00, board id: 2134, fw id: 1447239
- [ 2.115547] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
- [ 2.119965] md: Waiting for all devices to be available before autodetect
- [ 2.121217] md: If you don't use raid, use raid=noautodetect
- [ 2.122555] md: Autodetecting RAID arrays.
- [ 2.123749] md: Scanned 0 and added 0 devices.
- [ 2.124931] md: autorun ...
- [ 2.126101] md: ... autorun DONE.
- [ 2.129997] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities
- [ 2.131300] EXT4-fs (sda5): couldn't mount as ext2 due to feature incompatibilities
- [ 2.134758] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.136828] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
- [ 2.138925] Freeing unused kernel memory: 1168K (ffffffff81eda000 - ffffffff81ffe000)
- [ 2.140112] Write protecting the kernel read-only data: 14336k
- [ 2.144977] Freeing unused kernel memory: 2028K (ffff880001805000 - ffff880001a00000)
- [ 2.148136] Freeing unused kernel memory: 1176K (ffff880001cda000 - ffff880001e00000)
- [ 2.187380] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL -XZ)
- [ 2.192722] systemd[1]: Set hostname to <kombajn>.
- [ 2.197473] systemd-getty-g (106) used greatest stack depth: 4872 bytes left
- [ 2.199863] systemd-fstab-g (105) used greatest stack depth: 4616 bytes left
- [ 2.217247] gentoo-local-ge (111) used greatest stack depth: 3992 bytes left
- [ 2.243494] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 2.244722] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.245916] systemd[1]: Starting mnt-icybox.automount.
- [ 2.249127] systemd[1]: Set up automount mnt-icybox.automount.
- [ 2.250312] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 2.252730] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 2.253920] systemd[1]: Starting Delayed Shutdown Socket.
- [ 2.256345] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 2.257548] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 2.258768] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 2.259965] systemd[1]: Starting Paths.
- [ 2.262363] systemd[1]: Reached target Paths.
- [ 2.263559] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 2.264822] Switched to clocksource tsc
- [ 2.267316] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 2.268553] systemd[1]: Starting Journal Socket.
- [ 2.271051] systemd[1]: Listening on Journal Socket.
- [ 2.272665] systemd[1]: Starting Apply Kernel Variables...
- [ 2.277459] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 2.280332] systemd[1]: Starting Journal Service...
- [ 2.284516] systemd[1]: Started Journal Service.
- [ 2.288629] systemd-journald[121]: Vacuuming done, freed 0 bytes
- [ 2.345313] EXT4-fs (sda5): re-mounted. Opts: (null)
- [ 2.354405] systemd-udevd[160]: starting version 208
- [ 2.405175] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
- [ 2.406541] DRM: Fill_in_dev failed.
- [ 2.431038] systemd-udevd[167]: renamed network interface wlan0 to wlp13s0
- [ 2.444922] systemd-udevd[174]: renamed network interface eth0 to enp14s0
- [ 2.499540] Adding 4215804k swap on /dev/sda6. Priority:-1 extents:1 across:4215804k SS
- [ 2.522656] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.541213] systemd-journald[121]: Received request to flush runtime journal from PID 1
- [ 2.721687] bbswitch: version 0.7
- [ 2.723400] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
- [ 2.724603] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
- [ 2.725820] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
- [ 2.727256] bbswitch: detected an Optimus _DSM function
- [ 2.729092] pci 0000:01:00.0: enabling device (0006 -> 0007)
- [ 2.730978] bbswitch: disabling discrete graphics
- [ 2.732862] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
- [ 2.904150] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 6.643181] tg3 0000:0e:00.0: irq 46 for MSI/MSI-X
- [ 6.664273] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
- [ 7.317855] tg3 0000:0e:00.0 enp14s0: Link is down
- [ 8.013089] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
- [ 12.529010] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 12.551347] tg3 0000:0e:00.0: irq 46 for MSI/MSI-X
- [ 12.573174] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
- [ 12.640882] IPv6: ADDRCONF(NETDEV_UP): wlp13s0: link is not ready
- [ 18.365071] wlp13s0: authenticate with 00:4f:74:30:8c:ce
- [ 18.379561] wlp13s0: send auth to 00:4f:74:30:8c:ce (try 1/3)
- [ 18.381531] wlp13s0: authenticated
- [ 18.381550] ath9k 0000:0d:00.0 wlp13s0: disabling HT as WMM/QoS is not supported by the AP
- [ 18.381552] ath9k 0000:0d:00.0 wlp13s0: disabling VHT as WMM/QoS is not supported by the AP
- [ 18.381793] wlp13s0: associate with 00:4f:74:30:8c:ce (try 1/3)
- [ 18.384362] wlp13s0: RX AssocResp from 00:4f:74:30:8c:ce (capab=0x411 status=0 aid=1)
- [ 18.384553] wlp13s0: associated
- [ 18.384563] IPv6: ADDRCONF(NETDEV_CHANGE): wlp13s0: link becomes ready
- [ 172.706951] mtrr: no MTRR for c0000000,3ff0000 found
- [ 194.013637] [drm] Module unloaded
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement