API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 31st, 2018
213
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.24 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.4--LSDK-10.2-00082-4 (Mar 22 2016 - 18:52:52)
  2.  
  3. board953x - Honey Bee 2.0DRAM:
  4. sri
  5. Honey Bee 2.0
  6. ath_ddr_initial_config(195): (16bit) ddr2 init
  7. tap = 0x00000003
  8. Tap (low, high) = (0x6, 0x33)
  9. Tap values = (0x1c, 0x1c, 0x1c, 0x1c)
  10. 64 MB
  11. Flash Manuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x17
  12. flash size 8MB, sector count = 128
  13. Flash: 8 MB
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Setting 0x181162c0 to 0x4387a100
  20. Hit Ctrl+B to stop autoboot: 0
  21. Loading .text @ 0x80060000 (1420788 bytes)
  22. ## Starting application at 0x80060000 ...
  23.  
  24.  
  25. OpenWrt kernel loader for AR7XXX/AR9XXX
  26. Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  27. Decompressing kernel... done!
  28. Starting kernel at 80060000...
  29.  
  30. [ 0.000000] Linux version 4.9.58 (lipton@i3) (gcc version 5.5.0 (LEDE GCC 5.5.0 r5349-e3c55db) ) #0 Tue Nov 14 21:36:46 2017
  31. [ 0.000000] bootconsole [early0] enabled
  32. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  33. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  34. [ 0.000000] Determined physical RAM map:
  35. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  36. [ 0.000000] Initrd not found or empty - disabling initrd
  37. [ 0.000000] OF: fdt:No valid device tree found, continuing without
  38. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  39. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  40. [ 0.000000] Zone ranges:
  41. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  42. [ 0.000000] Movable zone start for each node
  43. [ 0.000000] Early memory node ranges
  44. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  45. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  46. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  47. [ 0.000000] Kernel command line: board=EAP115 mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) console=ttyS0,115200 rootfstype=squashfs noinitrd
  48. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  49. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  50. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  51. [ 0.000000] Writing ErrCtl register=00000000
  52. [ 0.000000] Readback ErrCtl register=00000000
  53. [ 0.000000] Memory: 59768K/65536K available (3245K kernel code, 171K rwdata, 820K rodata, 300K init, 213K bss, 5768K reserved, 0K cma-reserved)
  54. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  55. [ 0.000000] NR_IRQS:51
  56. [ 0.000000] Clocks: CPU:650.000MHz, DDR:393.212MHz, AHB:216.666MHz, Ref:25.000MHz
  57. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  58. [ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  59. [ 0.008270] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  60. [ 0.071122] pid_max: default: 32768 minimum: 301
  61. [ 0.076112] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.083093] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.093662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  64. [ 0.104077] futex hash table entries: 256 (order: -1, 3072 bytes)
  65. [ 0.111219] NET: Registered protocol family 16
  66. [ 0.117742] MIPS: machine is TP-LINK EAP115
  67. [ 0.373854] clocksource: Switched to clocksource MIPS
  68. [ 0.380515] NET: Registered protocol family 2
  69. [ 0.386073] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  70. [ 0.393447] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  71. [ 0.400235] TCP: Hash tables configured (established 1024 bind 1024)
  72. [ 0.407078] UDP hash table entries: 256 (order: 0, 4096 bytes)
  73. [ 0.413258] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  74. [ 0.420227] NET: Registered protocol family 1
  75. [ 0.429786] Crashlog allocated RAM at address 0x3f00000
  76. [ 0.436584] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  77. [ 0.450720] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  78. [ 0.456923] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  79. [ 0.477379] io scheduler noop registered
  80. [ 0.481523] io scheduler deadline registered (default)
  81. [ 0.487488] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  82. [ 0.494752] console [ttyS0] disabled
  83. [ 0.518688] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  84. [ 0.527799] console [ttyS0] enabled
  85. [ 0.527799] console [ttyS0] enabled
  86. [ 0.535356] bootconsole [early0] disabled
  87. [ 0.535356] bootconsole [early0] disabled
  88. [ 0.548411] m25p80 spi0.0: found gd25q64, expected m25p80
  89. [ 0.556588] m25p80 spi0.0: gd25q64 (8192 Kbytes)
  90. [ 0.561414] 8 cmdlinepart partitions found on MTD device spi0.0
  91. [ 0.567577] Creating 8 MTD partitions on "spi0.0":
  92. [ 0.572535] 0x000000000000-0x000000020000 : "u-boot"
  93. [ 0.579442] 0x000000020000-0x000000030000 : "pation-table"
  94. [ 0.587121] 0x000000030000-0x000000040000 : "product-info"
  95. [ 0.594725] 0x000000040000-0x0000001c0000 : "kernel"
  96. [ 0.601665] 0x0000001c0000-0x0000007c0000 : "rootfs"
  97. [ 0.608745] mtd: device 4 (rootfs) set to be root filesystem
  98. [ 0.614745] 1 squashfs-split partitions found on MTD device rootfs
  99. [ 0.621136] 0x0000003f0000-0x0000007c0000 : "rootfs_data"
  100. [ 0.628649] 0x0000007c0000-0x0000007f0000 : "config"
  101. [ 0.635760] 0x0000007f0000-0x000000800000 : "ART"
  102. [ 0.642485] 0x000000040000-0x0000007c0000 : "firmware"
  103. [ 0.650969] libphy: Fixed MDIO Bus: probed
  104. [ 0.670045] libphy: ag71xx_mdio: probed
  105. [ 1.305462] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=00000000, driver=Generic PHY]
  106. [ 1.315725] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  107. [ 1.323794] NET: Registered protocol family 10
  108. [ 1.332576] NET: Registered protocol family 17
  109. [ 1.337447] 8021q: 802.1Q VLAN Support v1.8
  110. [ 1.348186] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  111. [ 1.358008] Freeing unused kernel memory: 300K
  112. [ 1.362605] This architecture does not have kernel memory protection.
  113. [ 2.052687] init: Console is alive
  114. [ 2.056602] init: - watchdog -
  115. [ 2.463865] random: fast init done
  116. [ 2.943782] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  117. [ 3.002872] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  118. [ 3.021181] init: - preinit -
  119. [ 3.560952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  120. Press the [f] key and hit [enter] to enter failsafe mode
  121. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  122. [ 6.828499] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  123. [ 6.846218] mount_root: switching to jffs2 overlay
  124. [ 6.881837] urandom-seed: Seeding with /etc/urandom.seed
  125. [ 7.003925] procd: - early -
  126. [ 7.007883] procd: - watchdog -
  127. [ 7.617838] procd: - watchdog -
  128. [ 7.621394] procd: - ubus -
  129. [ 7.797863] procd: - init -
  130. Please press Enter to activate this console.
  131. [ 8.097813] kmodloader: loading kernel modules from /etc/modules.d/*
  132. [ 8.109844] ip6_tables: (C) 2000-2006 Netfilter Core Team
  133. [ 8.128351] Loading modules backported from Linux version wt-2017-10-06-0-ga7a22fbbd1f0
  134. [ 8.136715] Backport generated by backports.git v4.14-rc2-1-6-gedfb595c
  135. [ 8.147215] ip_tables: (C) 2000-2006 Netfilter Core Team
  136. [ 8.162314] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  137. [ 8.233228] xt_time: kernel timezone is -0000
  138. [ 8.306354] PPP generic driver version 2.4.2
  139. [ 8.313707] NET: Registered protocol family 24
  140. [ 8.392407] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
  141. [ 8.479319] kmodloader: done loading kernel modules from /etc/modules.d/*
  142. [ 15.885197] br-lan: port 1(eth0) entered blocking state
  143. [ 15.890616] br-lan: port 1(eth0) entered disabled state
  144. [ 15.896552] device eth0 entered promiscuous mode
  145. [ 15.911129] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  146. 127.453903] random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!