Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- result
- ccminer-1.7.6-r10-neoscrypt
- GPU #0: ASUS GTX 750 Ti, 124.50 kH/s
- ccminer.exe -a neoscrypt -o stratum+tcp://neoscrypt.eu.nicehash.com:3341 -u 14vZ4DHDzhttzKyNAmLzpRq6VLmCGb16vX
- --intensity=8.0 (useful)
- -i --intensity=N[,N] GPU intensity 8.0-25.0 (default: auto)
- Decimals are allowed for fine tuning
- --eco Use Eco mode
- Auto tuning for low energy (Lyra2REv2 only)
- --max-temp=N Only mine if gpu temp is less than specified value
- -t, --threads=N number of miner threads (default: number of nVidia GPUs)
- .
- ccminer-x64-2.2.4-cuda9
- GPU #0: ASUS GTX 750 Ti, 136.38 kH/s
- ccminer-x64.exe -a neoscrypt -o stratum+tcp://neoscrypt.eu.nicehash.com:3341 -u 14vZ4DHDzhttzKyNAmLzpRq6VLmCGb16vX
- nsgminer-win64-0.9.4
- --gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)
- --gpu-platform <arg> Select OpenCL platform ID to use for GPU mining (default: -1)
- --gpu-threads|-g <arg> Number of threads per GPU (1 - 10) (default: 1)
- .
- D:\桌面\t\nsgminer-win64-0.9.4\nsgminer-win64-0.9.4>nsgminer.exe -h
- nsgminer 0.9.4
- Built with the GPU mining support.
- Usage: nsgminer.exe [-DdGEgIKklpxPQqsTouvwOchnV]
- Options for both config file and command line:
- --neoscrypt Use the NeoScrypt algorithm for mining
- --api-allow <arg> Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
- --api-description <arg> Description placed in the API status header, default: miner version
- --api-groups <arg> API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use
- --api-listen Enable API, default: disabled
- --api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
- --api-port <arg> Port number of miner API (default: 4028)
- --auto-fan Automatically adjust all GPU fan speeds to maintain a target temperature
- --auto-gpu Automatically adjust all GPU engine clock speeds to maintain a target temperature
- --balance Change multipool strategy from failover to even share balance
- --benchmark Run the miner in benchmark mode - produces no shares
- --coinbase-addr <arg> Set coinbase payout address for solo mining
- --coinbase-sig <arg> Set coinbase signature when possible
- --compact Use compact display without per device statistics
- --debug|-D Enable debug output
- --debuglog Enable debug logging
- --device|-d <arg> Select device to use, (Use repeat -d for multiple devices, default: all)
- --disable-gpu|-G Disable GPU mining even if suitable devices exist
- --disable-rejecting Automatically disable pools that continually reject shares
- --expiry|-E <arg> Upper bound on how many seconds after getting work we consider a share from it stale (w/o longpoll active) (default: 120)
- --expiry-lp <arg> Upper bound on how many seconds after getting work we consider a share from it stale (with longpoll active) (default: 3600)
- --failover-only Don't leak work to backup pools when primary pool is lagging
- --gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)
- --gpu-platform <arg> Select OpenCL platform ID to use for GPU mining (default: -1)
- --gpu-threads|-g <arg> Number of threads per GPU (1 - 10) (default: 1)
- --gpu-map <arg> Map OpenCL to ADL or NVML device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
- --gpu-engine <arg> GPU engine (over)clock range in MHz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
- --gpu-fan <arg> GPU fan percentage range - one value, range and/or comma separated list (e.g. 0-85,85,65)
- --gpu-memclock <arg> Set the GPU memory (over)clock in MHz - one value for all or separate by commas for per card
- --gpu-memdiff <arg> Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode
- --gpu-powertune <arg> Set the GPU powertune percentage - one value for all or separate by commas for per card
- --gpu-reorder Attempt to reorder GPU devices according to PCI Bus ID
- --gpu-vddc <arg> Set the GPU voltage in Volts - one value for all or separate by commas for per card
- --intensity|-I <arg> Intensity of GPU scanning (d or fixed number within range; default: d to maintain desktop interactivity)
- --kernel-path|-K <arg> Specify a path to where bitstream and kernel files are (default: "/usr/local/bin")
- --kernel|-k <arg> Specify an OpenCL kernel to use, one value or comma separated
- neoscrypt generic NeoScrypt kernel
- neoscrypt_vliw NeoScrypt AMD VLIW kernel
- neoscrypt_vliwp NeoScrypt AMD VLIW kernel (parallel)
- --load-balance Change multipool strategy from failover to efficiency based balance
- --log|-l <arg> Interval in seconds between log output (default: 5)
- --log-show-date Show date on every log line in addition to time
- --net-delay Impose small delays in networking to not overload slow routers
- --no-adl Disable the AMD Display Library used for monitoring and setting GPU parameters
- --no-nvml Disable the NVIDIA Managment Library used for monitoring GPU parameters
- --no-gbt Disable getblocktemplate support
- --no-getwork Disable getwork support
- --no-longpoll Disable X-Long-Polling support
- --no-restart Do not attempt to restart devices that hang
- --no-stratum Disable Stratum detection
- --no-submit-stale Don't submit shares if they are detected as stale
- --pass|-p <arg> Password for a JSON-RPC server
- --per-device-stats Force verbose mode and output per-device statistics
- --pool-priority <arg> Priority for just the previous-defined pool
- --pool-proxy|-x <arg> Proxy URI to use for connecting to just the previous-defined pool
- --protocol-dump|-P Verbose dump of protocol-level activities
- --queue|-Q <arg> Minimum number of work items to have queued (0+) (default: 1)
- --quiet|-q Disable logging output, display status and errors
- --real-quiet Disable all output
- --remove-disabled Remove disabled devices entirely, as if they didn't exist
- --retries <arg> Number of times to retry failed submissions before giving up (-1 means never) (default: -1)
- --rotate <arg> Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
- --round-robin Change multipool strategy from failover to round robin on failure
- --scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: 60)
- --sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time)
- --sched-stop <arg> Set a time of day in HH:MM to stop mining (will quit without a start time)
- --sharelog <arg> Append share log to file
- --shares <arg> Quit after mining N shares (default: unlimited)
- --skip-security-checks <arg> Skip security checks sometimes to save bandwidth; only check 1/<arg>th of the time (default: never skip)
- --socks-proxy <arg> Set socks4 proxy (host:port)
- --submit-threads Minimum number of concurrent share submissions (default: 64)
- --temp-cutoff <arg> Maximum temperature devices will be allowed to reach before being disabled, one value or comma separated list
- --temp-hysteresis <arg> Set how much the temperature can fluctuate outside limits when automanaging speeds (default: 3)
- --temp-overheat <arg> Overheat temperature when automatically managing fan and GPU speeds, one value or comma separated list (default: 85)
- --temp-target <arg> Target temperature when automatically managing fan and clock speeds, one value or comma separated list
- --text-only|-T Disable ncurses formatted screen output
- --url|-o <arg> URL for a JSON-RPC server
- --user|-u <arg> Username for a JSON-RPC server
- --vectors|-v <arg> Override detected optimal vector (1, 2 or 4) - one value or comma separated list
- --verbose Log verbose output to stderr as well as status output
- --worksize|-w <arg> Override detected optimal worksize - one value or comma separated list
- --userpass|-O <arg> Username:Password pair for a JSON-RPC server
- --worktime Display extra work time debug information
- Options for command line only:
- --config|-c <arg> Load a JSON-format configuration file
- See example.conf for an example configuration.
- --help|-h Print this message
- --ndevs|-n Display number of detected GPUs, OpenCL platform information, and exit
- --version|-V Display version and exit
- D:\桌面\t\nsgminer-win64-0.9.4\nsgminer-win64-0.9.4>
- D:\桌面\t\sgminer-5-1-0-yescrypt\sgminer-5-1-0-yescrypt>sgminer.exe -h
- sgminer 5.1.0
- Usage: sgminer.exe [-kDdEgIXKlLLpPQqUsTouvwOchnV]
- Options for both config file and command line:
- --algorithm|--kernel|-k <arg> Set mining algorithm and most common defaults, default: scrypt
- --api-allow <arg> Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
- --api-description <arg> Description placed in the API status header, default: sgminer version
- --api-groups <arg> API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use
- --api-listen Enable API, default: disabled
- --api-mcast Enable API Multicast listener, default: disabled
- --api-mcast-addr <arg> API Multicast listen address
- --api-mcast-code <arg> Code expected in the API Multicast message, don't use '-'
- --api-mcast-des <arg> Description appended to the API Multicast reply, default: ''
- --api-mcast-port <arg> API Multicast listen port (default: 4028)
- --api-network Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
- --api-port <arg> Port number of miner API (default: 4028)
- --auto-fan Automatically adjust all GPU fan speeds to maintain a target temperature
- --auto-gpu Automatically adjust all GPU engine clock speeds to maintain a target temperature
- --balance Change multipool strategy from failover to even share balance
- --blake-compact Set SPH_COMPACT_BLAKE64 for Xn derived algorithms (Can give better hashrate for some GPUs)
- --compact Use compact display without per device statistics
- --debug|-D Enable debug output
- --debug-log Enable debug logging when stderr is redirected to file
- --default-profile <arg> Set Default Profile
- --description <arg> Pool description
- --device|-d <arg> Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
- --disable-rejecting Automatically disable pools that continually reject shares
- --expiry|-E <arg> Upper bound on how many seconds after getting work we consider a share from it stale (default: 28)
- --event-on <arg> Select event type to perform task on
- --event-runcmd <arg> Command to perform on event
- --event-reboot <arg> Reboot the system on event
- --event-reboot-delay <arg> Delay in seconds to wait before rebooting
- --event-quit <arg> Quit sgminer on event
- --event-quit-message <arg> Quit message when quitting sgminer on event
- --failover-only Don't leak work to backup pools when primary pool is lagging
- --failover-switch-delay <arg> Delay in seconds before switching back to a failed pool (default: 60)
- --fix-protocol Do not redirect to a different getwork protocol (eg. stratum)
- --gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)
- --gpu-platform <arg> Select OpenCL platform ID to use for GPU mining (default: -1)
- --gpu-threads|-g <arg> Number of threads per GPU - one value or comma separated list (e.g. 1,2,1)
- --gpu-engine <arg> GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
- --gpu-fan <arg> GPU fan percentage range - one value, range and/or comma separated list (e.g. 0-85,85,65)
- --gpu-map <arg> Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)
- --gpu-memclock <arg> Set the GPU memory (over)clock in Mhz - one value for all or separate by commas for per card
- --gpu-memdiff <arg> Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode
- --gpu-powertune <arg> Set the GPU powertune percentage - one value for all or separate by commas for per card
- --gpu-reorder Attempt to reorder GPU devices according to PCI Bus ID
- --gpu-vddc <arg> Set the GPU voltage in Volts - one value for all or separate by commas for per card
- --hamsi-expand-big <arg> Set SPH_HAMSI_EXPAND_BIG for X13 derived algorithms (1 or 4 are common) (default: 4)
- --hamsi-short Set SPH_HAMSI_SHORT for X13 derived algorithms (Can give better hashrate for some GPUs)
- --keccak-unroll <arg> Set SPH_KECCAK_UNROLL for Xn derived algorithms (Default: 0) (default: 0)
- --kernelfile <arg> Set the algorithm kernel source file (without file extension).
- --lookup-gap <arg> Set GPU lookup gap for scrypt mining, comma separated
- --luffa-parallel Set SPH_LUFFA_PARALLEL for Xn derived algorithms (Can give better hashrate for some GPUs)
- --incognito Do not display user name in status window
- --more-notices Shows work restart and new block notices, hidden by default
- --intensity|-I <arg> Intensity of GPU scanning (d or 4 -> 31,default: d to maintain desktop interactivity), overridden by --xintensity or --rawintensity.
- --xintensity|-X <arg> Shader based intensity of GPU scanning (1 to 9999), overridden --xintensity|-X and --rawintensity.
- --rawintensity <arg> Raw intensity of GPU scanning (1 to 2147483647), overrides --intensity|-I and --xintensity|-X.
- --kernel-path|-K <arg> Specify a path to where kernel files are (default: "/usr/local/bin")
- --load-balance Change multipool strategy from failover to quota based balance
- --log|-l <arg> Interval in seconds between log output (default: 5)
- --log-file|-L <arg> Log stderr to file
- --log-show-date|-L Show date on every log line
- --lowmem Minimise caching of shares for low memory applications
- --name|--pool-name <arg> Name of pool
- --net-delay Impose small delays in networking to not overload slow routers
- --nfactor <arg> Override default scrypt N-factor parameter.
- --no-adl Disable the ATI display library used for monitoring and setting GPU parameters
- --no-client-reconnect Disable 'client.reconnect' stratum functionality
- --no-restart Do not attempt to restart GPUs that hang
- --no-submit-stale Don't submit shares if they are detected as stale
- --no-extranonce|--pool-no-extranonce Disable 'extranonce' stratum subscribe for pool
- --pass|--pool-pass|-p <arg> Password for bitcoin JSON-RPC server
- --per-device-stats Force verbose mode and output per-device statistics
- --pool-algorithm|--pool-kernel <arg> Set algorithm for pool
- --pool-backup Mark this pool as a backup for simple connect strategy
- --pool-device <arg> Select devices to use with pool, one value, range and/or comma separated (e.g. 0-2,4) default: all
- --pool-kernelfile <arg> Set the pool's algorithm kernel source file (without file extension).
- --pool-lookup-gap <arg> Set Pool GPU lookup gap for scrypt mining, comma separated
- --pool-gpu-engine <arg> Pool GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
- --pool-gpu-fan <arg> GPU fan for pool
- --pool-gpu-memclock <arg> Set the Pool GPU memory (over)clock in Mhz - one value for all or separate by commas for per card
- --pool-gpu-powertune <arg> Set the Pool GPU powertune percentage - one value for all or separate by commas for per card
- --pool-gpu-threads <arg> Number of threads per GPU for pool
- --pool-gpu-vddc <arg> Set the Pool GPU voltage in Volts - one value for all or separate by commas for per card
- --pool-intensity <arg> Intensity of GPU scanning (pool-specific)
- --pool-nfactor <arg> Set N-factor for pool
- --pool-profile <arg> Profile to use with the pool
- --pool-rawintensity <arg> Raw intensity of GPU scanning (pool-specific)
- --pool-shaders <arg> Pool GPU shaders per card for tuning scrypt, comma separated
- --pool-thread-concurrency <arg> Set thread concurrency for pool
- --pool-worksize <arg> Override detected optimal worksize for pool - one value or comma separated list
- --pool-xintensity <arg> Shader based intensity of GPU scanning (pool-specific)
- --priority|--pool-priority <arg> Pool priority
- --profile-algorithm|--profile-kernel <arg> Set algorithm for profile
- --profile-device <arg> Select devices to use with profile, one value, range and/or comma separated (e.g. 0-2,4) default: all
- --profile-kernelfile <arg> Set the profile's algorithm kernel source file (without file extension).
- --profile-lookup-gap <arg> Set Profile GPU lookup gap for scrypt mining, comma separated
- --profile-gpu-engine <arg> Profile GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
- --profile-gpu-fan <arg> GPU fan for profile
- --profile-gpu-memclock <arg> Set the Profile GPU memory (over)clock in Mhz - one value for all or separate by commas for per card
- --profile-gpu-powertune <arg> Set the Profile GPU powertune percentage - one value for all or separate by commas for per card
- --profile-gpu-threads <arg> Number of threads per GPU for profile
- --profile-gpu-vddc <arg> Set the Profile GPU voltage in Volts - one value for all or separate by commas for per card
- --profile-intensity <arg> Intensity of GPU scanning (profile-specific)
- --profile-name <arg> Profile Name
- --profile-nfactor <arg> Set N-factor for profile
- --profile-rawintensity <arg> Raw intensity of GPU scanning (profile-specific)
- --profile-shaders <arg> Profile GPU shaders per card for tuning scrypt, comma separated
- --profile-thread-concurrency <arg> Set thread concurrency for profile
- --profile-worksize <arg> Override detected optimal worksize for profile - one value or comma separated list
- --profile-xintensity <arg> Shader based intensity of GPU scanning (profile-specific)
- --protocol-dump|-P Verbose dump of protocol-level activities
- --queue|-Q <arg> Minimum number of work items to have queued (0+) (default: 1)
- --quiet|-q Disable logging output, display status and errors
- --quota|--pool-quota|-U <arg> quota;URL combination for server with load-balance strategy quotas
- --real-quiet Disable all output
- --remove-disabled Remove disabled devices entirely, as if they didn't exist
- --rotate <arg> Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
- --round-robin Change multipool strategy from failover to round robin on failure
- --scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: 7)
- --sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time)
- --sched-stop <arg> Set a time of day in HH:MM to stop mining (will quit without a start time)
- --shaders <arg> GPU shaders per card for tuning scrypt, comma separated
- --sharelog <arg> Append share log to file
- --shares <arg> Quit after mining N shares (default: unlimited)
- --socks-proxy <arg> Set socks4 proxy (host:port)
- --show-coindiff Show coin difficulty rather than hash value of a share
- --state|--pool-state <arg> Specify pool state at startup (default: enabled)
- --switcher-mode <arg> Algorithm/gpu settings switcher mode.
- --tcp-keepalive <arg> TCP keepalive packet idle time (default: 30)
- --temp-cutoff <arg> Temperature which a device will be automatically disabled at, one value or comma separated list (default: 95)
- --temp-hysteresis <arg> Set how much the temperature can fluctuate outside limits when automanaging speeds (default: 3)
- --temp-overheat <arg> Temperature which a device will be throttled at while automanaging fan and/or GPU, one value or comma separated list (default: 85)
- --temp-target <arg> Temperature which a device should stay at while automanaging fan and/or GPU, one value or comma separated list (default: 75)
- --text-only|-T Disable ncurses formatted screen output
- --thread-concurrency <arg> Set GPU thread concurrency for scrypt mining, comma separated
- --url|--pool-url|-o <arg> URL for bitcoin JSON-RPC server
- --user|--pool-user|-u <arg> Username for bitcoin JSON-RPC server
- --verbose|-v Log verbose output to stderr as well as status output
- --watchpool-refresh <arg> Interval in seconds to refresh pool status (default: 30)
- --worksize|-w <arg> Override detected optimal worksize - one value or comma separated list
- --userpass|--pool-userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server
- --worktime Display extra work time debug information
- --difficulty-multiplier <arg> (deprecated) Difficulty multiplier for jobs received from stratum pools
- Options for command line only:
- --config|-c <arg> Load a JSON-format configuration file
- See example.conf for an example configuration.
- --default-config <arg> Specify the filename of the default config file
- Loaded at start and used when saving without a name.
- --remote-config-retry <arg> Number of times to retry downloading remote config file. Default: 3 (default: 3)
- --remote-config-wait <arg> Time in seconds to wait between download retries of remote config files. Default: 10secs (default: 10)
- --remote-config-usecache Use cached copy of the remote config file when download fails. Default: No
- --help|-h Print this message
- --ndevs|-n Display number of detected GPUs, OpenCL platform information, and exit
- --version|-V Display version and exit
- D:\桌面\t\sgminer-5-1-0-yescrypt\sgminer-5-1-0-yescrypt>
- D:\桌面\t\ccminer-1.7.6-r10-neoscrypt\ccminer-1.7.6-r10-neoscrypt>ccminer.exe --
- help
- *** ccminer 1.7.6 for nVidia GPUs by tpruvot@github ***
- Built with VC++ 2013 and nVidia CUDA SDK 8.0
- Originally based on Christian Buchner and Christian H. project
- Include some of the work of djm34, sp, tsiv and klausT.
- BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
- Usage: ccminer [OPTIONS]
- Options:
- -a, --algo=ALGO specify the hash algorithm to use
- blake Blake 256 (SFR)
- blake2s Blake2-S 256 (NEVA)
- blakecoin Fast Blake 256 (8 rounds)
- bmw BMW 256
- c11/flax X11 variant
- decred Decred Blake256
- deep Deepcoin
- dmd-gr Diamond-Groestl
- fresh Freshcoin (shavite 80)
- fugue256 Fuguecoin
- groestl Groestlcoin
- heavy Heavycoin
- jackpot Jackpot
- keccak Keccak-256 (Maxcoin)
- luffa Joincoin
- lyra2 Lyra2RE(Crypto)
- lyra2v2 Lyra2REv2(VertCoin)
- mjollnir Mjollnircoin
- myr-gr Myriad-Groestl
- neoscrypt FeatherCoin, Phoenix, UFO...
- nist5 NIST5 (TalkCoin)
- penta Pentablake hash (5x Blake 512)
- quark Quark
- qubit Qubit
- sib Sibcoin (X11+Streebog)
- scrypt Scrypt
- scrypt-jane Scrypt-jane Chacha
- skein Skein SHA2 (Skeincoin)
- skein2 Double Skein (Woodcoin)
- s3 S3 (1Coin)
- x11 X11 (DarkCoin)
- x13 X13 (MaruCoin)
- x14 X14
- x15 X15
- x17 X17
- vanilla Blake256-8 (VNL)
- whirlcoin Old Whirlcoin (Whirlpool algo)
- whirlpool Whirlpool algo
- zr5 ZR5 (ZiftrCoin)
- -d, --devices Comma separated list of CUDA devices to use.
- Device IDs start counting from 0! Alternatively takes
- string names of your cards like gtx780ti or gt640#2
- (matching 2nd gt640 in the PC)
- -i --intensity=N[,N] GPU intensity 8.0-25.0 (default: auto)
- Decimals are allowed for fine tuning
- --eco Use Eco mode
- Auto tuning for low energy (Lyra2REv2 only)
- --cuda-schedule Set device threads scheduling mode (default: auto)
- -f, --diff-factor Divide difficulty by this factor (default 1.0)
- -m, --diff-multiplier Multiply difficulty by this value (default 1.0)
- --vote=VOTE vote (for decred and HeavyCoin)
- --trust-pool trust the max block reward vote (maxvote) sent by the po
- ol
- -o, --url=URL URL of mining server
- -O, --userpass=U:P username:password pair for mining server
- -u, --user=USERNAME username for mining server
- -p, --pass=PASSWORD password for mining server
- --cert=FILE certificate for mining server using SSL
- -x, --proxy=[PROTOCOL://]HOST[:PORT] connect through a proxy
- -t, --threads=N number of miner threads (default: number of nVidia GPUs)
- -r, --retries=N number of times to retry if a network call fails
- (default: retry indefinitely)
- -R, --retry-pause=N time to pause between retries, in seconds (default: 30)
- --shares-limit maximum shares [s] to mine before exiting the program.
- --time-limit maximum time [s] to mine before exiting the program.
- -T, --timeout=N network timeout, in seconds (default: 300)
- -s, --scantime=N upper bound on time spent scanning current work when
- long polling is unavailable, in seconds (default: 10)
- -n, --ndevs list cuda devices
- -N, --statsavg number of samples used to compute hashrate (default: 30)
- --coinbase-addr=ADDR payout address for solo mining
- --no-getwork disable getwork support
- --no-gbt disable getblocktemplate support (height check in solo)
- --no-longpoll disable X-Long-Polling support
- --no-stratum disable X-Stratum support
- --no-extranonce disable extranonce subscribe on stratum
- -q, --quiet disable per-thread hashmeter output
- --no-color disable colored output
- -D, --debug enable debug output
- -P, --protocol-dump verbose dump of protocol-level activities
- --cpu-affinity set process affinity to cpu core(s), mask 0x3 for cores
- 0 and 1
- --cpu-priority set process priority (default: 3) 0 idle, 2 normal to 5
- highest
- -b, --api-bind=port IP:port for the miner API (default: 127.0.0.1:4068), 0 d
- isabled
- --api-remote Allow remote control, like pool switching
- --max-temp=N Only mine if gpu temp is less than specified value
- --max-rate=N[KMG] Only mine if net hashrate is less than specified value
- --max-diff=N Only mine if net difficulty is less than specified value
- Can be tuned with --resume-diff=N to set a resume value
- --show-diff display submitted block and net difficulty
- -B, --background run the miner in the background
- --benchmark run in offline benchmark mode
- --cputest debug hashes from cpu algorithms
- -c, --config=FILE load a JSON-format configuration file
- -V, --version display version information and exit
- -h, --help display this help text and exit
- D:\桌面\t\ccminer-1.7.6-r10-neoscrypt\ccminer-1.7.6-r10-neoscrypt>
- D:\桌面\t\ccminer-x64-2.2.4-cuda9>cls
- D:\桌面\t\ccminer-x64-2.2.4-cuda9>ccminer-x64.exe --help
- *** ccminer 2.2.4 for nVidia GPUs by tpruvot@github ***
- Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits
- Originally based on Christian Buchner and Christian H. project
- Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.
- BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
- Usage: ccminer [OPTIONS]
- Options:
- -a, --algo=ALGO specify the hash algorithm to use
- bastion Hefty bastion
- bitcore Timetravel-10
- blake Blake 256 (SFR)
- blake2s Blake2-S 256 (NEVA)
- blakecoin Fast Blake 256 (8 rounds)
- bmw BMW 256
- cryptolight AEON cryptonight (MEM/2)
- cryptonight XMR cryptonight
- c11/flax X11 variant
- decred Decred Blake256
- deep Deepcoin
- equihash Zcash Equihash
- dmd-gr Diamond-Groestl
- fresh Freshcoin (shavite 80)
- fugue256 Fuguecoin
- groestl Groestlcoin
- hmq1725 Doubloons / Espers
- jackpot JHA v8
- keccak Deprecated Keccak-256
- keccakc Keccak-256 (CreativeCoin)
- lbry LBRY Credits (Sha/Ripemd)
- luffa Joincoin
- lyra2 CryptoCoin
- lyra2v2 VertCoin
- lyra2z ZeroCoin (3rd impl)
- myr-gr Myriad-Groestl
- neoscrypt FeatherCoin, Phoenix, UFO...
- nist5 NIST5 (TalkCoin)
- penta Pentablake hash (5x Blake 512)
- phi BHCoin
- polytimos Politimos
- quark Quark
- qubit Qubit
- sha256d SHA256d (bitcoin)
- sha256t SHA256 x3
- sia SIA (Blake2B)
- sib Sibcoin (X11+Streebog)
- scrypt Scrypt
- scrypt-jane Scrypt-jane Chacha
- skein Skein SHA2 (Skeincoin)
- skein2 Double Skein (Woodcoin)
- skunk Skein Cube Fugue Streebog
- s3 S3 (1Coin)
- timetravel Machinecoin permuted x8
- tribus Denarius
- vanilla Blake256-8 (VNL)
- veltor Thorsriddle streebog
- whirlcoin Old Whirlcoin (Whirlpool algo)
- whirlpool Whirlpool algo
- x11evo Permuted x11 (Revolver)
- x11 X11 (DarkCoin)
- x13 X13 (MaruCoin)
- x14 X14
- x15 X15
- x17 X17
- wildkeccak Boolberry
- zr5 ZR5 (ZiftrCoin)
- -d, --devices Comma separated list of CUDA devices to use.
- Device IDs start counting from 0! Alternatively takes
- string names of your cards like gtx780ti or gt640#2
- (matching 2nd gt640 in the PC)
- -i --intensity=N[,N] GPU intensity 8.0-25.0 (default: auto)
- Decimals are allowed for fine tuning
- --cuda-schedule Set device threads scheduling mode (default: auto)
- -f, --diff-factor Divide difficulty by this factor (default 1.0)
- -m, --diff-multiplier Multiply difficulty by this value (default 1.0)
- -o, --url=URL URL of mining server
- -O, --userpass=U:P username:password pair for mining server
- -u, --user=USERNAME username for mining server
- -p, --pass=PASSWORD password for mining server
- --cert=FILE certificate for mining server using SSL
- -x, --proxy=[PROTOCOL://]HOST[:PORT] connect through a proxy
- -t, --threads=N number of miner threads (default: number of nVidia GPUs)
- -r, --retries=N number of times to retry if a network call fails
- (default: retry indefinitely)
- -R, --retry-pause=N time to pause between retries, in seconds (default: 30)
- --shares-limit maximum shares [s] to mine before exiting the program.
- --time-limit maximum time [s] to mine before exiting the program.
- -T, --timeout=N network timeout, in seconds (default: 300)
- -s, --scantime=N upper bound on time spent scanning current work when
- long polling is unavailable, in seconds (default: 10)
- --submit-stale ignore stale jobs checks, may create more rejected share
- s
- -n, --ndevs list cuda devices
- -N, --statsavg number of samples used to compute hashrate (default: 30)
- --no-gbt disable getblocktemplate support (height check in solo)
- --no-longpoll disable X-Long-Polling support
- --no-stratum disable X-Stratum support
- --no-extranonce disable extranonce subscribe on stratum
- -q, --quiet disable per-thread hashmeter output
- --no-color disable colored output
- -D, --debug enable debug output
- -P, --protocol-dump verbose dump of protocol-level activities
- --cpu-affinity set process affinity to cpu core(s), mask 0x3 for cores
- 0 and 1
- --cpu-priority set process priority (default: 3) 0 idle, 2 normal to 5
- highest
- -b, --api-bind=port IP:port for the miner API (default: 127.0.0.1:4068), 0 d
- isabled
- --api-remote Allow remote control, like pool switching, imply --api-a
- llow=0/0
- --api-allow=... IP/mask of the allowed api client(s), 0/0 for all
- --max-temp=N Only mine if gpu temp is less than specified value
- --max-rate=N[KMG] Only mine if net hashrate is less than specified value
- --max-diff=N Only mine if net difficulty is less than specified value
- Can be tuned with --resume-diff=N to set a resume value
- --max-log-rate Interval to reduce per gpu hashrate logs (default: 3)
- --mem-clock=3505 Set the gpu memory boost clock
- --mem-clock=+500 Set the gpu memory offset
- --gpu-clock=1150 Set the gpu engine boost clock
- --plimit=100 Set the gpu power limit in percentage
- --tlimit=80 Set the gpu thermal limit in degrees
- --led=100 Set the logo led level (0=disable, 0xFF00FF for RVB)
- --hide-diff hide submitted block and net difficulty (old mode)
- -B, --background run the miner in the background
- --benchmark run in offline benchmark mode
- --cputest debug hashes from cpu algorithms
- -c, --config=FILE load a JSON-format configuration file
- -V, --version display version information and exit
- -h, --help display this help text and exit
- D:\桌面\t\ccminer-x64-2.2.4-cuda9>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement