ahci0: <ATI IXP700 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
(aprobe0:ahcich0:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe1:ahcich1:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe1:ahcich1:0:15:0): CAM status: Command timeout
(aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017
(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked
ahcich1: Timeout on slot 0 port 0
ahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017
(aprobe1:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe1:ahcich1:0:0:0): CAM status: Command timeout
(aprobe1:ahcich1:0:0:0): Error 5, Retry was blocked
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017
(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retry was blocked
ahcich1: Timeout on slot 0 port 0
ahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00046017
(aprobe1:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe1:ahcich1:0:0:0): CAM status: Command timeout
(aprobe1:ahcich1:0:0:0): Error 5, Retry was blocked