1080poutputheight=1043
1080poutputwidth=1853
1080poutputx=33
1080poutputy=18
baudrate=115200
bootargs=init=/init console=ttyS0,115200n8 no_console_suspend storage=1 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,1080p,full hdmimode=1080p cvbsmode=576cvbs=
bootcmd=run start_autoscript; run storeboot
bootdelay=1
bootfile=boot.img
bootfromnand=0
bootm_low=0x00000000
bootm_size=0x80000000
bootpath=u-boot.bin
bootsize=100000
bootstart=0
bootup_offset=0x13084090
bootup_size=0x322c8
chipname=8726m8
console=ttyS0,115200n8
cvbsmode=576cvbs
digitaudiooutput=PCM
display_bpp=16
display_color_bg=0
display_color_fg=0xffff
display_color_format_index=16
display_height=1080
display_layer=osd2
display_width=1920
ethact=Meson_Ethernet
ethaddr=00:15:18:01:81:31
fb_addr=0x7900000
fb_height=1080
fb_width=1920
firstboot=1
gatewayip=10.18.9.1
get_dt=checkhw
has.accelerometer=false
hdmimode=1080p
hostname=arm_m8
initargs=init=/init console=ttyS0,115200n8 no_console_suspend  storage=1
initrd_high=60000000
ipaddr=10.18.9.97
loadaddr=0x12000000
loadaddr_logo=0x13000000
mmcargs=setenv bootargs console=${console} boardname=m8_board
netmask=255.255.255.0
normalsize=400000
normalstart=1000000
outputmode=1080p
p0path=uImage
p0size=400000
p0start=1000000
p1path=android.rootfs
p1size=8000000
p1start=1400000
partnum=2
preboot=if itest ${upgrade_step} == 3; then run prepare; run storeargs; run update; fi; if itest ${upgrade_step} == 1; then  defenv; setenv upgrade_step 2; e
preloaddtb=imgread dtb boot ${loadaddr}
prepare=logo size ${outputmode}; video open; video clear; video dev open ${outputmode};imgread pic logo bootup ${loadaddr_logo}; bmp display ${bootup_offset;
reboot_mode=charging
recovery=echo enter recovery;if mmcinfo; then if fatload mmc 0 ${loadaddr} recovery.img; then bootm;fi;fi; if usb start 0; then if fatload usb 0 ${loadaddr};
sdc_burning=sdc_burn ${sdcburncfg}
sdcburncfg=aml_sdc_burn.ini
serverip=10.18.9.113
start_autoscript=if usb start; then run start_usb_autoscript; fi; 
start_usb_autoscript=if fatload usb 0 11000000 s805_autoscript; then autoscr 11000000; fi;\
if fatload usb 1 11000000 s805_autoscript; then autoscr 11000000; fi; \
if fatload usb 2 11000000 s805_autoscript; then autoscr 11000000; fi; \
if fatload usb 3 11000000 s805_autoscript; then autoscr 11000000; fi;
stderr=serial
stdin=serial
stdout=serial
store=1
storeargs=setenv bootargs ${initargs} vdaccfg=${vdac_config} logo=osd1,loaded,${fb_addr},${outputmode},full hdmimode=${hdmimode} cvbsmode=${cvbsmode} androi}
storeboot=echo Booting...; if unifykey get usid; then  setenv bootargs ${bootargs} androidboot.serialno=${usid};fi;imgread kernel boot ${loadaddr};bootm;runy
switch_bootmode=if test ${reboot_mode} = factory_reset; then run recovery;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} i
testaddr=0x12400000
update=run usb_burning; if mmcinfo; then if fatexist mmc 0 ${sdcburncfg}; then run sdc_burning; else if fatload mmc 0 ${loadaddr} aml_autoscript; then autos;
update_ir=if irdetect; then run update; fi
update_key=saradc open 0; if saradc get_in_range 0 0x50; then msleep 50; if saradc get_in_range 0 0x50; then echo update by key...; run update; fi;fi
upgrade_step=0
usb_burning=update 1000
vdac_config=0xa000
video_dev=tvout
wipe_data=success

Environment size: 4003/65532 bytes