esphome:
  name: network-monitor
  friendly_name: network-monitor
  min_version: 2024.11.0
  name_add_mac_suffix: false

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: <encryption key>

# Allow Over-The-Air updates
ota:
- platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
sensor:
  - platform: homeassistant
    id: network_intake_temp
    entity_id: sensor.network_monitor_network_intake_temp
    internal: true
  - platform: homeassistant
    id: network_middle_temp
    entity_id: sensor.network_monitor_network_middle_temp
    internal: true
  - platform: homeassistant
    id: network_top_temp
    entity_id: sensor.network_monitor_network_top_temp
    internal: true
  - platform: homeassistant
    id: network_pdu_power
    entity_id: sensor.pdu_switch_0_power
    internal: true
  - platform: dht
    pin: GPIO21
    model: DHT22
    temperature:
      name: "Network Intake Temp"
    humidity:
      name: "Network Intake Humidity"
    update_interval: 10s
  - platform: dht
    pin: GPIO18
    model: DHT22
    temperature:
      name: "Network Middle Temp"
    humidity:
      name: "Network Middle Humidity"
    update_interval: 10s
  - platform: dht
    pin: GPIO19
    model: DHT22
    temperature:
      name: "Network Top Temp"
    humidity:
      name: "Network Top Humidity"
    update_interval: 10s

font:
  - file: "arial.ttf"
    id: arial_lg
    size: 54
  - file: "arial.ttf"
    id: arial_med
    size: 40
  - file: "arial.ttf"
    id: arial_sm
    size: 14

i2c:
  - id: bus_a
    sda: GPIO27
    scl: GPIO26
    frequency: 800kHz
  - id: bus_b
    sda: GPIO33
    scl: GPIO32
    frequency: 800kHz

display:
  - platform: ssd1306_i2c
    i2c_id: bus_a
    model: "SSD1306 128x64"
    address: 0x3C
    lambda: |-
      it.printf(0, 0, id(arial_med), "%.0f", id(network_intake_temp).state); 
      it.printf(it.get_width(), 0, id(arial_med), TextAlign::TOP_RIGHT, "%3.0f", id(network_middle_temp).state);   
      it.print(0, 47, id(arial_sm), "Intake    °F");
      it.print(78, 47, id(arial_sm), "  Middle");
  - platform: ssd1306_i2c
    i2c_id: bus_b
    model: "SSD1306 128x64"
    address: 0x3C
    lambda: |-
      it.printf(0, 0, id(arial_med), "%.0f", id(network_top_temp).state); 
      it.print(0, 47, id(arial_sm), "Top °F ");
      it.print(78, 47, id(arial_sm), "PDU W");
      it.printf(it.get_width(), 0, id(arial_med), TextAlign::TOP_RIGHT, "%3.0f", id(network_pdu_power).state);