[2019-11-18 02:26:50] [Output] : ⭐ Maximilian Bertone gets the car onto the elevator, pressing the "UP" button on the control.
[2019-11-18 02:27:04] [Output] : ⭐ Maximilian Bertone walks over to his toolbox, dragging him alongside him to the car.
[2019-11-18 02:27:27] [Output] : ⭐ Maximilian Bertone grabs a medium ratchet, an extension and a 13mm socket to go with it.
[2019-11-18 02:28:14] [Output] : ⭐ Maximilian Bertone goes to the section where the headers connect to the front pipes.
[2019-11-18 02:28:34] [Output] : ⭐ Maximilian Bertone uses the ratchet in order to loosen up the 4 13mm nuts that hold the front pipes to
[2019-11-18 02:29:03] [Output] : ⭐ The manifolds.      ((Maximilian Bertone))
[2019-11-18 02:29:38] [Output] : ⭐ Maximilian Bertone then takes them out by hand, leaving the front pipes being held to the headers
[2019-11-18 02:29:42] [Output] : ⭐ Just by the gasket.,      ((Maximilian Bertone))
[2019-11-18 02:31:11] [Output] : ⭐ Maximilian Bertone then walks over to the middle of the car, examining the two brace bars.
[2019-11-18 02:31:38] [Output] : ⭐ Maximilian Bertone sees that the bols holding them are 13mm, sighing.
[2019-11-18 02:32:01] [Output] : ⭐ Maximilian Bertone uses the ratchet, extension and 13mm socket in order to loosen up the 4 13mm bolts
[2019-11-18 02:32:16] [Output] : ⭐ Holding the first brace bar, then taking them off by hand.      ((Maximilian Bertone))
[2019-11-18 02:32:37] [Output] : ⭐ Maximilian Bertone would hold the bar as he'd take out the last bolt, as he'd later just drop it onto the groun
[2019-11-18 02:32:49] [Output] : ⭐ Maximilian Bertone moves on to the other brace bar, sitting behind the one he has just taken off.
[2019-11-18 02:33:20] [Output] : ⭐ Maximilian Bertone uses the ratchet in order to loosen up the 4 bolts, then takes the others out by hand.
[2019-11-18 02:33:36] [Output] : ⭐ Maximilian Bertone simply lets the brace bar fall onto the floor by itself.
[2019-11-18 03:38:54] [Output] : ⭐ Maximilian Bertone walks over to the rear muffler of the car.
[2019-11-18 03:39:13] [Output] : ⭐ Maximilian Bertone uses the ratchet and 13mm socket to remove two nuts holding the exhaust hanger
[2019-11-18 03:39:21] [Output] : ⭐ To the car's body.      ((Maximilian Bertone))
[2019-11-18 03:40:04] [Output] : ⭐ Maximilian Bertone would move to the midpipes, using the same ratchet with a 13mm socket to 
[2019-11-18 03:40:39] [Output] : ⭐ Loosen up the two nuts that hold the exhaust midpipes to the body via the hanger.      ((Maximilian Bertone))
[2019-11-18 03:41:49] [Output] : ⭐ Maximilian Bertone then goes to the front pipes, they would be containing the cats.
[2019-11-18 03:42:06] [Output] : ⭐ Maximilian Bertone removes the O2 sensors from them by hand, then removes the bolts holding the
[2019-11-18 03:42:33] [Output] : ⭐ Maximilian Bertone pulls out the O2 sensors by hand, then uses the ratchet in order to loosen up the nuts
[2019-11-18 03:42:53] [Output] : ⭐ Holding the hanger, but not before placing a hang onto the exhaust, holding it up properly.      ((Maximilian Bertone))
[2019-11-18 03:43:05] [Output] : ⭐ Maximilian Bertone slowly lets the heavy exhaust down, right under the car.
[2019-11-18 03:43:22] [Output] : ⭐ Maximilian Bertone goes over to the storage, grabbing a very long crate, comming back to the car with it.
[2019-11-18 03:45:10] [Output] : ⭐ Maximilian Bertone rips the crate open, taking out the new exhaust.
[2019-11-18 03:46:00] [Output] : ⭐ Maximilian Bertone goes right under the car, putting the new exhaust in it's place, checking if it fits.
[2019-11-18 03:46:08] [Output] : ⭐ Maximilian Bertone then lets the new exhaust down as he sees that it fits.
[2019-11-18 03:46:20] [Output] : ⭐ Maximilian Bertone grabs the set of hangers, nuts and bolts from the crate.
[2019-11-18 03:46:40] [Output] : ⭐ Maximilian Bertone fits the hangers onto the exhaust, then secures them in their place with the bolts and nuts 
[2019-11-18 03:46:42] [Output] : ⭐ That came with the kit.      ((Maximilian Bertone))
[2019-11-18 03:47:44] [Output] : ⭐ Maximilian Bertone lifts up the exhaust to it's designed position, holding it while swearing.
[2019-11-18 03:48:04] [Output] : ⭐ Maximilian Bertone gets the front pipe hanger in it's place, then puts the two lug nuts on by hand.
[2019-11-18 03:48:27] [Output] : ⭐ Maximilian Bertone tightens them up with his ratchet, thenlets go of the exhaust, swearing again
[2019-11-18 03:49:03] [Output] : ⭐ Maximilian Bertone connects the front pipes to the exhaust manifold, then presses it forcefully so the
[2019-11-18 03:49:06] [Output] : ⭐ Gasket would seal.      ((Maximilian Bertone))
[2019-11-18 03:49:25] [Output] : ⭐ Maximilian Bertone puts on the four nuts connecting the front exhaust pipes to the manifold by hand.
[2019-11-18 03:49:37] [Output] : ⭐ Maximilian Bertone then uses the ratchet and the 13mm socket in order to tighten them down properly.
[2019-11-18 03:50:00] [Output] : ⭐ Maximilian Bertone moves again to the front pipes.
[2019-11-18 03:50:33] [Output] : ⭐ Maximilian Bertone makes sure that he has tightened the hanger properly.
[2019-11-18 03:50:46] [Output] : ⭐ Maximilian Bertone then goes to the mid pipe, putting the nuts into the hanger, then tightening them down with
[2019-11-18 03:50:48] [Output] : ⭐ The rathet.      ((Maximilian Bertone))
[2019-11-18 03:51:13] [Output] : ⭐ Maximilian Bertone goes on to the muffler, putting the 2 nuts onto the hanger, then tightening them down proper
[2019-11-18 03:51:17] [Output] : ⭐ Properly by using his ratchet.      ((Maximilian Bertone))
[2019-11-18 03:51:43] [Output] : ⭐ Maximilian Bertone puts the first brace back in it's place, then puts the four bolts on.
[2019-11-18 03:51:56] [Output] : ⭐ Maximilian Bertone starts tightening them down with his ratchet, removing his hand from the brace.
[2019-11-18 03:52:07] [Output] : ⭐ Maximilian Bertone tightens them down properly, then bends down, picking up the second brace.
[2019-11-18 03:52:25] [Output] : ⭐ Maximilian Bertone puts it onto it's spot, then puts a bolt on by hand, tightening it down, so it holds the
[2019-11-18 03:52:27] [Output] : ⭐ Brace in place.      ((Maximilian Bertone))
[2019-11-18 03:52:37] [Output] : ⭐ Maximilian Bertone then puts the others on, then tightens them down using his ratchet.
[2019-11-18 03:52:50] [Output] : ⭐ Maximilian Bertone checks if the exhaust has any mounting problems, then gets the car down.