KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x3fee0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CEFFF write-protect CF000-EFFFF uncachable F0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 37ddb000 - 37fef758 Allocated new RAMDISK: 00100000 - 00314758 Move RAMDISK from 0000000037ddb000 - 0000000037fef757 to 00100000 - 00314757 ACPI: RSDP 000f6920 00014 (v00 GBT ) ACPI: RSDT 3fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 3fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 3fee3180 040DF (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS 3fee0000 00040 ACPI: HPET 3fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 3fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 3fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: SSDT 3fee74c0 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) ACPI: SSDT 3fee7950 00275 (v01 PmRef CpuPm 00003000 INTL 20040311) ACPI: Local APIC address 0xfee00000 134MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 0001441924] TEXT DATA BSS ==> [0001000000 - 0001441924] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0001442000 - 00014480f6] BRK ==> [0001442000 - 00014480f6] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000100000 - 0000314758] NEW RAMDISK ==> [0000100000 - 0000314758] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f4f50] f4f50 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fee0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fee0 On node 0 totalpages: 261759 free_area_init_node: node 0, pgdat c13aba80, node_mem_map c144a000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 270 pages used for memmap HighMem zone: 34260 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:80100000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 11 pages/cpu @c2000000 s23448 r0 d21608 u1048576 pcpu-alloc: s23448 r0 d21608 u1048576 alloc=1*4194304 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259713 Kernel command line: root=/dev/sdb2 video=uvesafb:ywrap,1024x768-32@60,mtrr:3,splash=silent,theme:tty1 CONSOLE=/dev/tty1 udev quiet resume=/dev/sdb1 elevator=cfq doscsi PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003fee0) Memory: 1030636k/1047424k available (2701k kernel code, 15736k reserved, 1073k data, 356k init, 138120k highmem) virtual kernel memory layout: fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc13b0000 - 0xc1409000 ( 356 kB) .data : 0xc12a3625 - 0xc13afb48 (1073 kB) .text : 0xc1000000 - 0xc12a3625 (2701 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2533.290 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.58 BogoMIPS (lpj=2533290) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10132.47 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 PCI: MCFG area at c0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4200000-0xe4203fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1d.2: reg 20 io port: [0xe100-0xe11f] pci 0000:00:1d.3: reg 20 io port: [0xe200-0xe21f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4204000-0xe42043ff] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe1000000-0xe1ffffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe2ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] pci 0000:03:00.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xe4010000-0xe4010fff] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xe4000000-0xe400ffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.1: bridge 32bit mmio: [0xe3000000-0xe3ffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff] pci 0000:04:00.0: reg 10 32bit mmio: [0xe4100000-0xe41000ff] pci 0000:04:00.0: reg 14 io port: [0xd000-0xd007] pci 0000:04:00.0: reg 18 io port: [0xd100-0xd1ff] pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe41fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:0a: ioport range 0x400-0x4bf could not be reserved system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved system 00:0c: iomem range 0xcf000-0xcffff has been reserved system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved system 00:0c: iomem range 0xfc000-0xfffff could not be reserved system 00:0c: iomem range 0x3fee0000-0x3fefffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0x3fedffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xe0000000-0xe2ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xb000-0xbfff pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0xc000-0xcfff pci 0000:00:1c.1: MEM window: 0xe3000000-0xe3ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xe4100000-0xe41fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe2ffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xe3000000-0xe3ffffff] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xe4100000-0xe41fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 2129k freed highmem bounce pool size: 64 pages aufs 2-32 msgmni has been set to 1748 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 lp: driver loaded but no devices found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 uvesafb: unrecognized option splash=silent uvesafb: unrecognized option theme:tty1 uvesafb: NVIDIA Corporation, G72 Board - p381n0 , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: protected mode interface info at c000:d640 uvesafb: pmi: set display start = c00cd676, set palette = c00cd6e0 uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da uvesafb: VBIOS/hardware supports DDC2 transfers uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=6144 Console: switching to colour frame buffer device 128x48 fbcondecor: console 0 using theme 'tty1' fbcondecor: switched decor state to 'on' on console 0 uvesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 24576k, total 131072k fb0: VESA VGA frame buffer device Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PPP generic driver version 2.4.2 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe4204000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 356k freed usb 1-5: new high speed USB device using ehci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 ata1.00: HPA detected: current 312579695, native 312581808 ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 ata1.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66 ata2.01: HPA detected: current 156299375, native 156301488 ata2.01: ATA-6: ST380011A, 8.01, max UDMA/100 ata2.01: 156299375 sectors, multi 16: LBA48 ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/100 scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 scsi 2:0:1:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5 sd 2:0:1:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 < sdb1 sdb2 sdb3 sdb4 < sdb5 > sd 2:0:1:0: [sdb] Attached SCSI disk sda5 > sd 1:0:0:0: [sda] Attached SCSI disk REISERFS (device sdb2): found reiserfs format "3.6" with standard journal REISERFS (device sdb2): using ordered data mode REISERFS (device sdb2): journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sdb2): checking transaction log (sdb2) scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 sd 0:0:0:0: [sdc] 62483464 512-byte logical blocks: (31.9 GB/29.7 GiB) sd 0:0:0:0: [sdc] Write Protect is off sd 0:0:0:0: [sdc] Mode Sense: 16 24 09 51 sd 0:0:0:0: [sdc] Assuming drive cache: write through usb-storage: device scan complete sd 0:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 0:0:0:0: [sdc] Assuming drive cache: write through sd 0:0:0:0: [sdc] Attached SCSI removable disk REISERFS (device sdb2): replayed 796 transactions in 5 seconds REISERFS (device sdb2): Using r5 hash to sort names udev: starting version 146 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 3fee78c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) processor LNXCPU:01: registered as cooling_device1 input: PC Speaker as /devices/platform/pcspkr/input/input3 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 5-1: new low speed USB device using uhci_hcd and address 2 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 27 for MSI/MSI-X eth0: RTL8168c/8111c at 0xf9da6000, 00:1d:7d:7e:46:4f, XID 1c4000c0 IRQ 27 usb 5-1: configuration #1 chosen from 1 choice input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4 generic-usb 0003:0566:3002.0001: input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.3-1/input0 input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input5 generic-usb 0003:0566:3002.0002: input: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.3-1/input1 usb 5-2: new low speed USB device using uhci_hcd and address 3 intel_rng: FWH not detected usb 5-2: configuration #1 chosen from 1 choice Floppy drive(s): fd0 is 1.44M input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input6 generic-usb 0003:045E:00CB.0003: input: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.3-2/input0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 FDC 0 is a post-1991 82077 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue Dec 8 18:51:41 PST 2009 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=0 offMin=0x1db offMax=0xc65 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000). REISERFS (device sdb2): Removing [55574 290640 0x0 SD]..done REISERFS (device sdb2): Removing [55574 270827 0x0 SD]..done REISERFS (device sdb2): Removing [55574 270818 0x0 SD]..done REISERFS (device sdb2): Removing [55574 267720 0x0 SD]..done REISERFS (device sdb2): Removing [55574 267719 0x0 SD]..done REISERFS (device sdb2): Removing [55574 267671 0x0 SD]..done REISERFS (device sdb2): Removing [55574 267656 0x0 SD]..done REISERFS (device sdb2): Removing [55574 266877 0x0 SD]..done REISERFS (device sdb2): Removing [55574 266868 0x0 SD]..done REISERFS (device sdb2): Removing [55574 266122 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265289 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265278 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265267 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265262 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265260 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265258 0x0 SD]..done REISERFS (device sdb2): Removing [55574 265255 0x0 SD]..done REISERFS (device sdb2): Removing [55574 264485 0x0 SD]..done REISERFS (device sdb2): Removing [55574 264470 0x0 SD]..done REISERFS (device sdb2): Removing [55574 264468 0x0 SD]..done REISERFS (device sdb2): Removing [55574 264456 0x0 SD]..done REISERFS (device sdb2): Removing [10447 263686 0x0 SD]..done REISERFS (device sdb2): Removing [55574 251330 0x0 SD]..done REISERFS (device sdb2): Removing [55574 63555 0x0 SD]..done REISERFS (device sdb2): Removing [336152 63525 0x0 SD]..done REISERFS (device sdb2): Removing [336152 63524 0x0 SD]..done REISERFS (device sdb2): There were 26 uncompleted unlinks/truncates. Completed REISERFS (device sdb5): found reiserfs format "3.6" with standard journal REISERFS (device sdb5): using ordered data mode REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sdb5): checking transaction log (sdb5) fbcondecor: console 0 using theme 'tty1' fbcondecor: switched decor state to 'on' on console 0 REISERFS (device sdb5): replayed 659 transactions in 6 seconds REISERFS (device sdb5): Using r5 hash to sort names r8169: eth0: link up r8169: eth0: link up Adding 1060248k swap on /dev/sdb1. Priority:-1 extents:1 across:1060248k fbcondecor: console 1 using theme 'tty2' fbcondecor: switched decor state to 'on' on console 1 fbcondecor: console 2 using theme 'tty3' fbcondecor: switched decor state to 'on' on console 2 fbcondecor: console 3 using theme 'tty4' fbcondecor: switched decor state to 'on' on console 3 fbcondecor: console 4 using theme 'tty5' fbcondecor: switched decor state to 'on' on console 4 fbcondecor: console 5 using theme 'tty6' fbcondecor: switched decor state to 'on' on console 5 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present fuse init (API version 7.13) FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-5: USB disconnect, address 2 usb 1-5: new high speed USB device using ehci_hcd and address 5 usb 1-5: string descriptor 0 malformed (err = -61), defaulting to 0x0409 usb 1-5: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi: unknown device type 31 scsi 3:0:0:0: No Device PQ: 7 ANSI: 7 usb-storage: device scan complete usb 1-5: USB disconnect, address 5 usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: string descriptor 0 malformed (err = -61), defaulting to 0x0409 usb 1-5: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi: unknown device type 31 scsi 4:0:0:0: No Device PQ: 7 ANSI: 7 usb-storage: device scan complete