#include <REG51F380.H>

;-------------------------------------------------------------------------------------------------------------------;
;CONSTANT DEFINES FOR CHAR_NUM AND CHAR_STATE
;-------------------------------------------------------------------------------------------------------------------;
CHAR_0	        EQU 0C0H				;DEFINE CHARS FOR 8BITSEG
CHAR_1	        EQU 0F9H
CHAR_2	        EQU 0A4H
CHAR_3	        EQU 0B0H
CHAR_4	        EQU 099H
CHAR_5	        EQU 092H
CHAR_6	        EQU 082H
CHAR_7	        EQU 0F8H
CHAR_8	        EQU 080H
CHAR_9	        EQU 090H
CHAR_A	        EQU 088H
CHAR_B	        EQU 083H
CHAR_C	        EQU 0C6H
CHAR_D	        EQU 0A1H
CHAR_E	        EQU 086H
CHAR_F	        EQU 08EH
;-------------------------------------------------------------
AND_OP EQU 88H
OR_OP EQU 0C0H
NOT_OP EQU 0ABH
XOR_OP EQU 89H
ADD_OP EQU 8CH
SUB_OP EQU 0EAH
ROTL_OP EQU	0C7H
ROTR_OP EQU 0CEH

S_READY EQU 0
S_SELECT EQU 1
S_OP2 EQU 2
S_PROCESS EQU 3

OP_1 DATA 30H
OP_2 DATA 31H
OPER DATA 32H
STATE DATA 33H
N_STATE DATA 34H

KSET EQU P0.6
KLOAD EQU P0.7
	
CSEG AT 400H
	OP_TABLE: 		;OPERADORES
		DB AND_OP, OR_OP, NOT_OP, XOR_OP, ADD_OP, SUB_OP, ROTL_OP, ROTR_OP
CSEG AT 500H		;caracteres segmento 8bits
	DIGITS_TABLE:
		DB CHAR_0, CHAR_1, CHAR_2, CHAR_3, CHAR_4, CHAR_5, CHAR_6, CHAR_7, CHAR_8, CHAR_9, CHAR_A, CHAR_B, CHAR_C, CHAR_D, CHAR_E, CHAR_F	;0-F
				
CSEG AT 0H
	JMP RESET

RESET:
	ACALL Init_Device
	SETB KSET				;ATIVAR BOTOES
	SETB KLOAD
	MOV R3, #0H
	MOV A, #0H
	MOV OP_1, #0H
	MOV OP_2, #0H
	MOV STATE, #S_READY
	MOV N_STATE, #S_READY
;-----------------------------------------------------
STATE_MACHINE:
	MOV STATE, N_STATE
	MOV A, STATE
	RL A
	MOV DPTR, #JMP_TABLE
	JMP @A+DPTR
JMP_TABLE:
	AJMP READY
	AJMP SELECT
;	AJMP OP2
;	AJMP PROCESS
;-----------------------------------------------------STATE READY
READY:
	MOV DPTR, #DIGITS_TABLE
	MOV P2, #0AFH
	ACALL START
DISPLAYBCD:
	MOV A, R3
	MOVC A, @A+DPTR
	MOV P2, A
BUTTONS:
	JNB KLOAD, OPER1
	JB KSET, BUTTONS
INCREMENT:
	JNB KSET, $
	INC R3
	CJNE R3, #16, DISPLAYBCD
	MOV R3, #0H
	JMP DISPLAYBCD
START:
	JB KSET, START
	JNB KSET, $
	RET
OPER1:
	MOV OP_1, R3
	MOV P1, OP_1
	MOV N_STATE, #S_SELECT
	JMP STATE_MACHINE
;---------------------------------------------STATE SELECT
SELECT:
	MOV DPTR, #OP_TABLE
	MOV R3, #0H
SELECT_2:
	MOV A, R3
	MOVC A, @A+DPTR
	MOV P2, A
BUTT_OPER:
	JNB KLOAD, $
	JB KSET, BUTT_OPER
INC_OPER:
	JNB KSET, $
	INC R3
	CJNE R3, #8, SELECT_2
	JMP SELECT
	
	


;------------------------------------------------------------------------
PCA_Init:
    MOV  PCA0MD,    #000h
    RET
Port_IO_Init: 
    MOV  XBR1,      #040h
    RET
Init_Device:
    lcall PCA_Init
    lcall Port_IO_Init
    ret
;------------------------------------------------------------------------
	
END