################################# 
# Pi MusicBox / Mopidy Settings # 
################################# 
# 
# Edit the settings of your MusicBox and the Mopidy music server here
# This is a file read by both the MusicBox startup-scripts and Mopidy.
# For more info on the settings of Mopidy: http://docs.mopidy.com/en/latest/config/
# or the particular extenion's GitHub page 
#
# Every line starting with a # is a comment, it does not do anything until you remove the #

# --------------------
# | Network Settings |
# --------------------
[network]
# Settings for your WiFi network, if you use a (supported) wifi-dongle
# Only supports WPA security, no WEP or access points without security (dive into the command line for that!)
wifi_network = SavkaNET
wifi_password = 6183199959

# Set the name of the MusicBox. 
# In this way you can identify and access different devices on the same network e.g. across different rooms.
# A MusicBox device named kitchen would be accessible from a web browser at http://kitchen.local/, from an MPD 
# client at kitchen.local and advertised as kitchen on AirTunes.
# The name is restricted to a maximum of 9 alphanumeric characters (no spaces, dots, etc).
# You can even have different devices with different Spotify accounts when needed.
name = MusicBox

# Mount Windows Network Drive on boot (via samba/cifs)
# The address is exactly how Samba mount works: //servername/mountpoint/directory
# e.g. //192.168.1.5/musicmount or //server.local/shared/music
# if the mount needs a username/password, also set it (leave empty for guest-access)
# Don't forget to let Mopidy/MusicBox scan the contents at first boot (see below) 
mount_address = 
mount_user = 
mount_password = 

# Here you can change the default workgroup of the Windows network.
# This will set the workgroup to the name you want
workgroup = WORKGROUP

# Enable this to allow remote login via SSH on MusicBox
enable_ssh = false

# By default, MusicBox waits for the network to come up, since there is not much to do without a network.
# If you want to skip this, e.g. for testing purposes, uncomment this line
wait_for_network = true

# -----------
# | Spotify |
# -----------
# https://github.com/mopidy/mopidy-spotify
[spotify]
# Supply your PREMIUM account credentials to enable Spotify
enabled = false
username = 
password = 
# The bitrate, the quality of the music played by Spotify, can be set to 96, 160 (default) or 320
bitrate = 320
cache_dir = ""

# -----------
# | Last.fm |
# -----------
# https://github.com/mopidy/mopidy-scrobbler
# Supply your credentials to scrobble tracks to Last.fm
[scrobbler]
enabled = false
username = 
password = 

# --------------
# | SoundCloud |
# --------------
# https://github.com/mopidy/mopidy-soundcloud
# Supply your auth_token obtained from http://www.mopidy.com/authenticate
[soundcloud]
enabled = false
auth_token = 

# ----------------
# | Google Music |
# ----------------
# https://github.com/hechtus/mopidy-gmusic
# Supply your credentials to enable Google Music
# NOTE: If enabled this may slow down the start of MusicBox. Please be patient
[gmusic]
enabled = false
all_access = true
username  = 
password = 
deviceid = 

# -----------
# | YouTube |
# -----------
# https://github.com/dz0ny/mopidy-youtube
# Play music from Youtube
[youtube]
enabled = true

# ----------
# | Dirble |
# ----------
# https://github.com/mopidy/mopidy-dirble
# Play radio stations from Dirble
[dirble]
enabled = true
api_key = 473279e3fa0e7010cbbbb40ecc31890d46e57a2e
countries = US, NL, DE, NO, SE

# ------------
# | Subsonic |
# ------------
# https://github.com/rattboi/mopidy-subsonic
# Stream music from your Subsonic Music Streamer
[subsonic]
enabled = false
hostname = 
port = 
username = 
password = 
ssl = 

# ----------------
# | TuneIn Radio |
# ----------------
# https://github.com/kingosticks/mopidy-tunein
# Play radio stations from TuneIn
[tunein]
enabled = true

# ------------------------
# | The Internet Archive |
# ------------------------
# http://mopidy-internetarchive.readthedocs.org/en/latest/config.html
# Listen to sounds and music from the Internet Archive
[internetarchive]
enabled = false

# -----------
# | Soma FM |
# -----------
# https://github.com/AlexandrePTJ/mopidy-somafm
# Play radio stations from Soma FM
[somafm]
enabled = false
encoding = mp3
quality = fast

# -----------
# | Podcast |
# -----------
# https://github.com/tkem/mopidy-podcast
# Play podcasts from different sources
[podcast]
# Note: You cannot add settings for [podcast-itunes] or [podcast-gpodder]
# because it breaks the startup script (won't read dashes in section names
enabled = true
feeds = 

# ---------------
# | AudioAddict |
# ---------------
# https://github.com/nilicule/mopidy-audioaddict
# Play music from all the AudioAddict network of sites (login optional)
[audioaddict]
enabled = false


# ---------------------
# | MusicBox Settings |
# ---------------------
[musicbox]
# To secure your device, change the default password to something else.
# For security, the value in this file will be automatically cleaned out when the password is set in MusicBox
root_password = 

# Automatically resize the filesystem and use all available space on your SD card. 
# Use at your own risk, you could lose data on your card.  
# (If so, you can put the original MusicBox image on it again and start over) 
resize_once = false

# Scan on startup for new music files on the SD card or the network shares (could take a while!).
# Local files work ok for moderate size collections. Large music database sizes could cause problems.
# IMPORTANT: if you enable scan_always this will scan on every boot.
# If your music doesn't change or you only stream music set scan_once instead. 
#scan_once = true
scan_always = true

# MusicBox can automatically start playing a stream/song after startup.
# It will wait a number of seconds before trying to do so for the system to first become ready. 
# The wait required varies per device, network and configuration so if it doesn't work then increase the time.
# e.g. autoplay = http://nprdmp.ic.llnwd.net/stream/nprdmp_live01_mp3 or local:track:MusicBox/Music%20File.mp3 (on the SD Card)
autoplay = 
autoplaywait = 60

# -------------
# | Streaming |
# -------------
# Set these options to enable streaming to Pi MusicBox
# AirTunes (using Shairport-sync):
enable_shairport = 

# DLNA/uPnP/OpenHome (using upmpdcli):
enable_upnp = 

# ------------------
# | Audio Settings |
# ------------------
# Because of limitations with some USB-DACs, MusicBox downsamples USB sound to 44k by default. Set to false to disable.
downsample_usb = true

# Set default audio output. This overrides the automatic detection (which sets to usb audio if an usb audio device
# is found, else to hdmi (if hdmi is connected at boot), and otherwise just to the analog out).
# i2s cards (e.g. HifiBerry etc) are not detected automatically and must be explicitly set here.
# Options: analog, hdmi, usb, hifiberry_dac, hifiberry_digi, hifiberry_dacplus, hifiberry_amp, iqaudio_dac
output = 

[audio]
# Set the startup volume of MusicBox
# Values: from 0 to 100
mixer_volume = 85

# --------------------------------------------------------------------------
# | OTHER Settings                                                         |
# | You probably don't want to edit the settings below this line. Really.  |
# | Unless you know what you're doing, or you want to change the webclient |
# --------------------------------------------------------------------------
# This sets the gstreamer buffer. It's a bit tricky...
# If you have problems with stuttering sound, try other values here, like:
# or
#output = alsasink buffer-time=300000 latency-time=20000
#output = alsasink buffer-time=200000 latency-time=10000
output = alsasink

mixer = software

# Optionally, you can use alsamixer. This enables you to use hardware mixers of usb/audiocards.
# Set the previous setting to:
#mixer = alsamixer
# And set the card and contol below. E.g. 
#card = 1 
#control = Master 
# Run the command 'amixer scontrols' from the commandline to list available controls on your system
# See https://github.com/mopidy/mopidy-alsamixer
[alsamixer]
card = 
control = 

[stream]
enabled = true

[http]
enabled = true
hostname = 0.0.0.0
port = 6680
#Disable zeroconf
zeroconf = ""

# -------------
# | Webclient |
# -------------
# Here you can change the default webclient
# options: /opt/webclient /opt/moped
static_dir = /opt/webclient

[musicbox_webclient]
enabled = true
musicbox = true

[websettings]
enabled = true
musicbox = true
config_file = /boot/config/settings.ini

[mpd]
hostname = 0.0.0.0

[logging]
config_file = /etc/mopidy/logging.conf
debug_file = /var/log/mopidy/mopidy-debug.log

[local]
enabled = true
media_dir = /music
playlists_dir = /var/lib/mopidy/playlists
data_dir = /var/lib/mopidy/localdata
#This sets the method of indexing local files
#You can set it to json or whoosh. Whoosh might be better with large collections, JSON is a bit more mature.
# TODO: You cannot add settings for [local-sqlite]
# because it breaks the startup script (won't read dashes in section names
library = sqlite

scan_timeout = 1000
scan_flush_threshold = 1000
excluded_file_extensions = .html, .jpeg, .jpg, .log, .nfo, .png, .txt, .mkv, .avi, .divx, .qt, .wmv, .htm, .zip, .rar, .gz, .pdf, .exe, .ini, .mid, .db, .m3u, .sfv, .midi