smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win8.1(64)] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop SSHD Device Model: ST1000LM014-SSHD-8GB Serial Number: W380WJ78 LU WWN Device Id: 5 000c50 03d272442 Firmware Version: LVD3 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 20 18:13:20 2017 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 150) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 196) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 20287584 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2650 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 17633512139 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11593 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2659 184 End-to-End_Error 0x0032 085 085 099 Old_age Always FAILING_NOW 15 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 173 190 Airflow_Temperature_Cel 0x0022 066 055 045 Old_age Always - 34 (Min/Max 24/41) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45 193 Load_Cycle_Count 0x0032 074 074 000 Old_age Always - 52727 194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 8 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 10439 hours (434 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 60 68 1f 00 Error: UNC at LBA = 0x001f6860 = 2058336 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 00 68 1f e0 00 00:00:05.431 READ DMA EXT 25 00 80 00 68 1f e0 00 00:00:05.303 READ DMA EXT 25 00 80 00 68 1f e0 00 00:00:05.259 READ DMA EXT 25 00 80 80 27 28 e0 00 00:00:05.244 READ DMA EXT 25 00 80 00 1d 28 e0 00 00:00:05.244 READ DMA EXT Error 3 occurred at disk power-on lifetime: 10439 hours (434 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 64 68 1f 00 Error: UNC at LBA = 0x001f6864 = 2058340 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 00 68 1f e0 00 00:00:05.303 READ DMA EXT 25 00 80 00 68 1f e0 00 00:00:05.259 READ DMA EXT 25 00 80 80 27 28 e0 00 00:00:05.244 READ DMA EXT 25 00 80 00 1d 28 e0 00 00:00:05.244 READ DMA EXT 25 00 80 00 88 27 e0 00 00:00:05.243 READ DMA EXT Error 2 occurred at disk power-on lifetime: 10439 hours (434 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 60 68 1f 00 Error: UNC at LBA = 0x001f6860 = 2058336 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 00 68 1f e0 00 00:00:05.259 READ DMA EXT 25 00 80 80 27 28 e0 00 00:00:05.244 READ DMA EXT 25 00 80 00 1d 28 e0 00 00:00:05.244 READ DMA EXT 25 00 80 00 88 27 e0 00 00:00:05.243 READ DMA EXT 25 00 40 6e 78 27 e0 00 00:00:05.145 READ DMA EXT Error 1 occurred at disk power-on lifetime: 10439 hours (434 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 64 68 1f 00 Error: UNC at LBA = 0x001f6864 = 2058340 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 00 68 1f e0 00 00:00:05.098 READ DMA EXT 25 00 40 fe 63 1f e0 00 00:00:05.097 READ DMA EXT 25 00 01 ff ff ff ef 00 00:00:05.093 READ DMA EXT 25 00 01 ff ff ff ef 00 00:00:05.093 READ DMA EXT 25 00 01 ff ff ff ef 00 00:00:05.093 READ DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.