bootm 0xC0600000
## Booting kernel from Legacy Image at c0600000 ...
   Image Name:   Linux-3.6.0-rc2-00404-ge5a834f
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2180608 Bytes = 2.1 MiB
   Load Address: c0008000
   Entry Point:  c0008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.6.0-rc2-00404-ge5a834f (trini@bill-the-cat) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 PREEMPT Wed Aug 22 21:12:53 MST 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: DaVinci DA850/OMAP-L138/AM18x EVM
Memory policy: ECC disabled, Data cache writethrough
BUG: mapping for 0xffff0000 at 0xfffe0000 out of vmalloc space
DaVinci da850/omap-l138/am18x variant 0x1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS2,115200n8 root=/dev/mtdblock4 rootfstype=jffs2 rw ip=off
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125472k/125472k available, 5600k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc03db000   (3916 kB)
      .init : 0xc03db000 - 0xc04003ec   ( 149 kB)
      .data : 0xc0402000 - 0xc042bc40   ( 168 kB)
       .bss : 0xc042bc64 - 0xc0453608   ( 159 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:245
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
Calibrating delay loop... 148.88 BogoMIPS (lpj=744448)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc02ef210 - 0xc02ef268
DaVinci: 144 gpio irqs
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
MUX: initialized MMCSD0_DAT_0
MUX: Setting register MMCSD0_DAT_0
	   PINMUX10 (0x00000028) = 0x00000000 -> 0x00000200
MUX: initialized MMCSD0_DAT_1
MUX: Setting register MMCSD0_DAT_1
	   PINMUX10 (0x00000028) = 0x00000200 -> 0x00002200
MUX: initialized MMCSD0_DAT_2
MUX: Setting register MMCSD0_DAT_2
	   PINMUX10 (0x00000028) = 0x00002200 -> 0x00022200
MUX: initialized MMCSD0_DAT_3
MUX: Setting register MMCSD0_DAT_3
	   PINMUX10 (0x00000028) = 0x00022200 -> 0x00222200
MUX: initialized MMCSD0_CLK
MUX: Setting register MMCSD0_CLK
	   PINMUX10 (0x00000028) = 0x00222200 -> 0x00222202
MUX: initialized MMCSD0_CMD
MUX: Setting register MMCSD0_CMD
	   PINMUX10 (0x00000028) = 0x00222202 -> 0x00222222
MUX: initialized GPIO4_0
MUX: Setting register GPIO4_0
	   PINMUX10 (0x00000028) = 0x00222222 -> 0x80222222
MUX: initialized GPIO4_1
MUX: Setting register GPIO4_1
	   PINMUX10 (0x00000028) = 0x80222222 -> 0x88222222
MUX: initialized MMCSD1_DAT_0
MUX: Setting register MMCSD1_DAT_0
	   PINMUX18 (0x00000048) = 0x00000000 -> 0x00000200
MUX: initialized MMCSD1_DAT_1
MUX: Setting register MMCSD1_DAT_1
	   PINMUX19 (0x0000004c) = 0x00000000 -> 0x00020000
MUX: initialized MMCSD1_DAT_2
MUX: Setting register MMCSD1_DAT_2
	   PINMUX19 (0x0000004c) = 0x00020000 -> 0x00022000
MUX: initialized MMCSD1_DAT_3
MUX: Setting register MMCSD1_DAT_3
	   PINMUX19 (0x0000004c) = 0x00022000 -> 0x00022200
MUX: initialized MMCSD1_CLK
MUX: Setting register MMCSD1_CLK
	   PINMUX18 (0x00000048) = 0x00000200 -> 0x00002200
MUX: initialized MMCSD1_CMD
MUX: Setting register MMCSD1_CMD
	   PINMUX18 (0x00000048) = 0x00002200 -> 0x00022200
MUX: initialized GPIO6_9
MUX: Setting register GPIO6_9
	   PINMUX13 (0x00000034) = 0x00000000 -> 0x08000000
MUX: initialized GPIO6_10
MUX: Setting register GPIO6_10
	   PINMUX13 (0x00000034) = 0x08000000 -> 0x08800000
MUX: initialized AHCLKX
MUX: Setting register AHCLKX
	   PINMUX0 (0x00000000) = 0x44000000 -> 0x44100000
MUX: initialized ACLKX
MUX: Setting register ACLKX
	   PINMUX0 (0x00000000) = 0x44100000 -> 0x44100010
MUX: initialized AFSX
MUX: Setting register AFSX
	   PINMUX0 (0x00000000) = 0x44100010 -> 0x44101010
MUX: initialized AHCLKR
MUX: Setting register AHCLKR
	   PINMUX0 (0x00000000) = 0x44101010 -> 0x44111010
MUX: initialized ACLKR
MUX: Setting register ACLKR
	   PINMUX0 (0x00000000) = 0x44111010 -> 0x44111011
MUX: initialized AFSR
MUX: Setting register AFSR
	   PINMUX0 (0x00000000) = 0x44111011 -> 0x44111111
MUX: initialized AMUTE
MUX: Setting register AMUTE
	   PINMUX0 (0x00000000) = 0x44111111 -> 0x41111111
MUX: initialized AXR_11
MUX: Setting register AXR_11
	   PINMUX1 (0x00000004) = 0x00000000 -> 0x00010000
MUX: initialized AXR_12
MUX: Setting register AXR_12
	   PINMUX1 (0x00000004) = 0x00010000 -> 0x00011000
MUX: initialized LCD_D_0
MUX: Setting register LCD_D_0
	   PINMUX17 (0x00000044) = 0x00000000 -> 0x00000020
MUX: initialized LCD_D_1
MUX: Setting register LCD_D_1
	   PINMUX17 (0x00000044) = 0x00000020 -> 0x00000022
MUX: initialized LCD_D_2
MUX: Setting register LCD_D_2
	   PINMUX16 (0x00000040) = 0x00000000 -> 0x20000000
MUX: initialized LCD_D_3
MUX: Setting register LCD_D_3
	   PINMUX16 (0x00000040) = 0x20000000 -> 0x22000000
MUX: initialized LCD_D_4
MUX: Setting register LCD_D_4
	   PINMUX16 (0x00000040) = 0x22000000 -> 0x22200000
MUX: initialized LCD_D_5
MUX: Setting register LCD_D_5
	   PINMUX16 (0x00000040) = 0x22200000 -> 0x22220000
MUX: initialized LCD_D_6
MUX: Setting register LCD_D_6
	   PINMUX16 (0x00000040) = 0x22220000 -> 0x22222000
MUX: initialized LCD_D_7
MUX: Setting register LCD_D_7
	   PINMUX16 (0x00000040) = 0x22222000 -> 0x22222200
MUX: initialized LCD_D_8
MUX: Setting register LCD_D_8
	   PINMUX18 (0x00000048) = 0x00022200 -> 0x00022220
MUX: initialized LCD_D_9
MUX: Setting register LCD_D_9
	   PINMUX18 (0x00000048) = 0x00022220 -> 0x00022222
MUX: initialized LCD_D_10
MUX: Setting register LCD_D_10
	   PINMUX17 (0x00000044) = 0x00000022 -> 0x20000022
MUX: initialized LCD_D_11
MUX: Setting register LCD_D_11
	   PINMUX17 (0x00000044) = 0x20000022 -> 0x22000022
MUX: initialized LCD_D_12
MUX: Setting register LCD_D_12
	   PINMUX17 (0x00000044) = 0x22000022 -> 0x22200022
MUX: initialized LCD_D_13
MUX: Setting register LCD_D_13
	   PINMUX17 (0x00000044) = 0x22200022 -> 0x22220022
MUX: initialized LCD_D_14
MUX: Setting register LCD_D_14
	   PINMUX17 (0x00000044) = 0x22220022 -> 0x22222022
MUX: initialized LCD_D_15
MUX: Setting register LCD_D_15
	   PINMUX17 (0x00000044) = 0x22222022 -> 0x22222222
MUX: initialized LCD_PCLK
MUX: Setting register LCD_PCLK
	   PINMUX18 (0x00000048) = 0x00022222 -> 0x02022222
MUX: initialized LCD_HSYNC
MUX: Setting register LCD_HSYNC
	   PINMUX19 (0x0000004c) = 0x00022200 -> 0x00022202
MUX: initialized LCD_VSYNC
MUX: Setting register LCD_VSYNC
	   PINMUX19 (0x0000004c) = 0x00022202 -> 0x00022222
MUX: initialized NLCD_AC_ENB_CS
MUX: Setting register NLCD_AC_ENB_CS
	   PINMUX19 (0x0000004c) = 0x00022222 -> 0x02022222
MUX: initialized GPIO2_8
MUX: Setting register GPIO2_8
	   PINMUX5 (0x00000014) = 0x00110110 -> 0x80110110
MUX: initialized GPIO2_15
MUX: Setting register GPIO2_15
	   PINMUX5 (0x00000014) = 0x80110110 -> 0x80110118
MUX: initialized RTC_ALARM
MUX: Setting register RTC_ALARM
	   PINMUX0 (0x00000000) = 0x41111111 -> 0x21111111
bio: create slab <bio-0> at 0
edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
edma-dma-engine edma-dma-engine.1: TI EDMA DMA engine driver
i2c_davinci i2c_davinci.1: Runtime PM disabled, clock forced on.
Switching to clocksource timer0_1
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
EMAC: MII PHY configured, RMII PHY will not be functional
MUX: initialized GPIO2_6
MUX: Setting register GPIO2_6
	   PINMUX6 (0x00000018) = 0x00000000 -> 0x00000080
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 245
io scheduler noop registered (default)
start plist test
end plist test
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A
serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A
console [ttyS2] enabled
brd: module loaded
spi_davinci spi_davinci.1: Runtime PM disabled, clock forced on.
edma-dma-engine edma-dma-engine.0: allocated channel for 0:18
edma-dma-engine edma-dma-engine.0: allocated channel for 0:19
spi_davinci spi_davinci.1: DMA: supported
spi_davinci spi_davinci.1: DMA: RX channel: 18, TX channel: 19, event queue: 0
spi_davinci spi_davinci.1: master is unqueued, this is deprecated
m25p80 spi1.0: m25p64 (8192 Kbytes)
Creating 6 MTD partitions on "m25p80":
0x000000000000-0x000000010000 : "UBL"
0x000000010000-0x000000090000 : "U-Boot"
0x000000090000-0x0000000a0000 : "U-Boot-Env"
0x0000000a0000-0x000000320000 : "Kernel"
0x000000320000-0x000000720000 : "Filesystem"
0x0000007f0000-0x000000800000 : "MAC-Address"
Read MAC addr from SPI Flash: 00:08:ee:04:be:ef
spi_davinci spi_davinci.1: Controller at 0xfef0e000
dm9000 Ethernet Driver, V1.31
davinci_mdio davinci_mdio.0: Runtime PM disabled, clock forced on.
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5
davinci_mdio davinci_mdio.0: detected phy mask fffffffe
libphy: davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[0]: device davinci_mdio-0:00, driver unknown
i2c /dev entries driver
davinci_mmc davinci_mmc.0: Runtime PM disabled, clock forced on.
edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode
davinci_mmc davinci_mmc.1: Runtime PM disabled, clock forced on.
edma-dma-engine edma-dma-engine.1: allocated channel for 1:29
edma-dma-engine edma-dma-engine.1: allocated channel for 1:28
mmc0: new high speed SD card at address 0002
mmcblk0: mmc0:0002 00000 1.86 GiB 
 mmcblk0: p1 p2
davinci_mmc davinci_mmc.1: Using DMA, 4-bit mode
TCP: cubic registered
NET: Registered protocol family 17
console [netcon0] enabled
netconsole: network logging started
davinci_emac davinci_emac.1: Runtime PM disabled, clock forced on.
/home/trini/work/ssd/kernel/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (jffs2 filesystem) on device 31:4.
Freeing init memory: 148K
INIT: version 2.86 booting
Please wait: booting...
Starting udev
WARNING: -e needs -E or -F
udevd (992): /proc/992/oom_adj is deprecated, please use /proc/992/oom_score_adj instead.
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Remounting root file system...
Caching udev devnodes
Populating dev cache
root: mount: mounting rootfs on / failed: No such file or directory
root: mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
Cannot create link over existing -/etc/resolv.conf-.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Thu Aug 23 03:35:00 UTC 2012
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Starting syslogd/klogd: done

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution am180x-evm ttyS2

Angstrom 2010.7-test-20110311 am180x-evm ttyS2

am180x-evm login: root
root@am180x-evm:~#