Booting Linux on physical CPU 0x0
Linux version 5.4.6 (vlad@vlad) (gcc version 7.3.1 20180622 (release) [ARM/embed                                                                             ded-7-branch revision 261907] (15:7-2018-q2-6+b1)) #3 Thu Dec 26 01:56:25 MSK 20                                                                             19
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt: Machine model: Atmel AT91SAM9M10G45-EK
Memory policy: Data cache writeback
Built 1 zonelists, mobility grouping off.  Total pages: 4064
Kernel command line: console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot                                                                             /kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 7200K/16384K available (5887K kernel code, 189K rwdata, 2224K rodata, 24                                                                             4K init, 125K bss, 9184K reserved, 0K cma-reserved)
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x24c/0x42c with crng_init=0
clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 7167226906                                                                              ns
Console: colour dummy device 80x30
sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093                                                                             750ns
Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x70008400 - 0x7000847c
devtmpfs: initialized
Duplicate name in fb@0x00500000, renamed to "display#1"
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1493                                                                             1722236523437 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: PM: standby: standby, suspend: ulp0
No ATAGs?
gpio-at91 fffff200.gpio: at address (ptrval)
gpio-at91 fffff400.gpio: at address (ptrval)
gpio-at91 fffff600.gpio: at address (ptrval)
gpio-at91 fffff800.gpio: at address (ptrval)
gpio-at91 fffffa00.gpio: at address (ptrval)
pinctrl-at91 fffff200.pinctrl: initialized AT91 pinctrl driver
atmel_tcb fff7c000.timer: IRQ index 1 not found
atmel_tcb fff7c000.timer: IRQ index 2 not found
atmel_tcb fffd4000.timer: IRQ index 1 not found
atmel_tcb fffd4000.timer: IRQ index 2 not found
at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8                                                                              channels
AT91: Detected SoC family: at91sam9g45
AT91: Detected SoC: at91sam9g45, revision 2
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
at91_i2c fff84000.i2c: can't get DMA channel, continue without DMA support
at91_i2c fff84000.i2c: AT91 i2c bus driver (hw version: 0x302).
at91_i2c fff88000.i2c: can't get DMA channel, continue without DMA support
at91_i2c fff88000.i2c: AT91 i2c bus driver (hw version: 0x302).
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@l                                                                             inux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource pit
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Initialise system trusted keyrings
workingset: timestamp_bits=30 max_order=11 bucket_order=0
Key type asymmetric registered
Asymmetric key parser 'x509' registered
io scheduler mq-deadline registered
io scheduler kyber registered
atmel_lcdfb 500000.fb: 500000.fb supply lcd not found, using dummy regulator
atmel_lcdfb 500000.fb: 510KiB frame buffer at 70c80000 (mapped at (ptrval))
Console: switching to colour frame buffer device 120x45
atmel_lcdfb 500000.fb: fb0: Atmel LCDC at 0x00500000 (mapped at (ptrval)), irq 3                                                                             5
brd: module loaded
loop: module loaded
atmel_usart_serial.0.auto: ttyS0 at MMIO 0xffffee00 (irq = 16, base_baud = 83333                                                                             33) is a ATMEL_SERIAL
printk: console [ttyS0] enabled
atmel_usart_serial.1.auto: ttyS2 at MMIO 0xfff90000 (irq = 23, base_baud = 83333                                                                             33) is a ATMEL_SERIAL
nand: No NAND device found
atmel-nand-controller 40000000.nand: NAND scan failed: -19
atmel_spi fffa4000.spi:   can not allocate dma coherent memory
mtd_dataflash@0 enforce active low on chipselect handle
atmel_spi fffa4000.spi: Atmel SPI Controller version 0x210 at 0xfffa4000 (irq 33                                                                             )
libphy: Fixed MDIO Bus: probed
macb fffbc000.ethernet: invalid hw address, using random
libphy: MACB_mii_bus: probed
random: fast init done
macb fffbc000.ethernet (unnamed net_device) (uninitialized): no PHY found
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
atmel-ehci 800000.ehci: EHCI Host Controller
atmel-ehci 800000.ehci: new USB bus registered, assigned bus number 1
atmel-ehci 800000.ehci: irq 36, io mem 0x00800000
atmel-ehci 800000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.6 ehci_hcd
usb usb1: SerialNumber: 800000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci 700000.ohci: USB Host Controller
at91_ohci 700000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 700000.ohci: irq 36, io mem 0x00700000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: USB Host Controller
usb usb2: Manufacturer: Linux 5.4.6 ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
atmel_usba_udc 600000.gadget: MMIO registers at [mem 0xfff78000-0xfff783ff] mapp                                                                             ed at (ptrval)
atmel_usba_udc 600000.gadget: FIFO at [mem 0x00600000-0x0067ffff] mapped at (ptr                                                                             val)
g_serial gadget: Gadget Serial v2.4
g_serial gadget: g_serial ready
at91_rtc fffffdb0.rtc: registered as rtc0
at91_rtc fffffdb0.rtc: AT91 Real Time Clock driver.
rtc-at91sam9 fffffd20.rtc: rtc1: SET TIME!
rtc-at91sam9 fffffd20.rtc: registered as rtc1
at91-reset fffffd00.rstc: Starting after wakeup
at91_wdt fffffd40.watchdog: watchdog is disabled
at91_wdt: probe of fffffd40.watchdog failed with error -22
atmel_mci fff80000.mmc: version: 0x410
atmel_mci fff80000.mmc: using dma0chan1 for DMA transfers
atmel_mci fff80000.mmc: Atmel MCI controller at 0xfff80000 irq 31, 1 slots
atmel_mci fffd0000.mmc: version: 0x410
atmel_mci fffd0000.mmc: using dma0chan2 for DMA transfers
atmel_mci fffd0000.mmc: Atmel MCI controller at 0xfffd0000 irq 32, 1 slots
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
iio iio:device0: Resolution used: 10 bits
input: at91_adc as /devices/platform/ahb/ahb:apb/fffb0000.adc/input/input0
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
input: gpio_keys as /devices/platform/gpio_keys/input/input1
at91_rtc fffffdb0.rtc: setting system clock to 2007-01-01T00:00:10 UTC (11676096                                                                             10)
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ALSA device list:
  No soundcards found.
platform regulatory.0: Direct firmware load for regulatory.db failed with error                                                                              -2
cfg80211: failed to load regulatory.db
Waiting for root device /dev/mmcblk0p2...