[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6059039e-ec2e-471f-83ed-cf8e24d3048c ro radeon.backlight=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire 7750G/JE70_HR, BIOS V1.21 08/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 24F800000 mask FFF800000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff939f400fe1b0] [ 0.000000] Base memory trampoline at [ffff939f40097000] 97000 size 24576 [ 0.000000] BRK [0x1c5337000, 0x1c5337fff] PGTABLE [ 0.000000] BRK [0x1c5338000, 0x1c5338fff] PGTABLE [ 0.000000] BRK [0x1c5339000, 0x1c5339fff] PGTABLE [ 0.000000] BRK [0x1c533a000, 0x1c533afff] PGTABLE [ 0.000000] BRK [0x1c533b000, 0x1c533bfff] PGTABLE [ 0.000000] BRK [0x1c533c000, 0x1c533cfff] PGTABLE [ 0.000000] BRK [0x1c533d000, 0x1c533dfff] PGTABLE [ 0.000000] BRK [0x1c533e000, 0x1c533efff] PGTABLE [ 0.000000] BRK [0x1c533f000, 0x1c533ffff] PGTABLE [ 0.000000] RAMDISK: [mem 0x375d9000-0x37ae3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000AF7FE120 000084 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000AF7FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x00000000AF7EF000 009039 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x00000000AF76D000 000040 [ 0.000000] ACPI: FACS 0x00000000AF76D000 000040 [ 0.000000] ACPI: ASF! 0x00000000AF7FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x00000000AF7FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x00000000AF7FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x00000000AF7F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x00000000AF7EE000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000AF7ED000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x00000000AF7EB000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x00000000AF7E8000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000AF7E7000 00094E (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000AF7E6000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000AF7E5000 0004E8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x24f7f7000-0x24f7fbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000024f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000af63efff] [ 0.000000] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000024f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f7fffff] [ 0.000000] On node 0 totalpages: 2092508 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11161 pages used for memmap [ 0.000000] DMA32 zone: 714304 pages, LIFO batch:31 [ 0.000000] Normal zone: 21472 pages used for memmap [ 0.000000] Normal zone: 1374208 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff93a18f400000 s105304 r8192 d29864 u262144 [ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2059790 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6059039e-ec2e-471f-83ed-cf8e24d3048c ro radeon.backlight=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8150912K/8370032K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 219120K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2195.217 MHz processor [ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.43 BogoMIPS (lpj=8780868) [ 0.000040] pid_max: default: 32768 minimum: 301 [ 0.000061] ACPI: Core revision 20160831 [ 0.006369] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.006426] Security Framework initialized [ 0.006431] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.006440] AppArmor: AppArmor disabled by boot time parameter [ 0.006934] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008703] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009465] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009478] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009768] CPU: Physical Processor ID: 0 [ 0.009772] CPU: Processor Core ID: 0 [ 0.009780] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.009784] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.009789] mce: CPU supports 9 MCE banks [ 0.009801] CPU0: Thermal monitoring enabled (TM1) [ 0.009816] process: using mwait in idle threads [ 0.009821] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.009826] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.010267] Freeing SMP alternatives memory: 24K [ 0.048500] ftrace: allocating 25212 entries in 99 pages [ 0.061944] smpboot: Max logical packages: 2 [ 0.062024] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.062487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.102178] TSC deadline timer enabled [ 0.102181] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.102190] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.102223] ... version: 3 [ 0.102227] ... bit width: 48 [ 0.102230] ... generic registers: 4 [ 0.102234] ... value mask: 0000ffffffffffff [ 0.102237] ... max period: 00007fffffffffff [ 0.102241] ... fixed-purpose events: 3 [ 0.102244] ... event mask: 000000070000000f [ 0.102917] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.103040] x86: Booting SMP configuration: [ 0.103045] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.122520] x86: Booted up 1 node, 8 CPUs [ 0.122529] smpboot: Total of 8 processors activated (35123.47 BogoMIPS) [ 0.130014] devtmpfs: initialized [ 0.130095] x86/mm: Memory block size: 128MB [ 0.133126] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes) [ 0.133227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.133248] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.133307] pinctrl core: initialized pinctrl subsystem [ 0.133436] NET: Registered protocol family 16 [ 0.149635] cpuidle: using governor ladder [ 0.165647] cpuidle: using governor menu [ 0.165715] Simple Boot Flag at 0x44 set to 0x1 [ 0.165745] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.165763] ACPI: bus type PCI registered [ 0.165778] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.165864] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.165872] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.165888] PCI: Using configuration type 1 for base access [ 0.165947] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.177861] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.178138] ACPI: Added _OSI(Module Device) [ 0.178144] ACPI: Added _OSI(Processor Device) [ 0.178148] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.178152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.178412] ACPI: Executed 1 blocks of module-level executable AML code [ 0.182560] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.182942] ACPI: Dynamic OEM Table Load: [ 0.182954] ACPI: SSDT 0xFFFF93A185545800 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.183363] ACPI: Dynamic OEM Table Load: [ 0.183375] ACPI: SSDT 0xFFFF93A185611C00 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.183677] ACPI: Dynamic OEM Table Load: [ 0.183687] ACPI: SSDT 0xFFFF93A1856B6E00 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.185160] ACPI : EC: EC started [ 0.185165] ACPI : EC: interrupt blocked [ 0.205785] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.205803] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.205810] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.205816] ACPI: Interpreter enabled [ 0.205843] ACPI: (supports S0 S3 S4 S5) [ 0.205847] ACPI: Using IOAPIC for interrupt routing [ 0.205879] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.337933] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.337943] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.337987] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.338483] PCI host bridge to bus 0000:00 [ 0.338489] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.338494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.338498] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.338505] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.338511] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.338522] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.338627] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.338661] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.338709] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.338809] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.338841] pci 0000:00:16.0: reg 0x10: [mem 0xc1304000-0xc130400f 64bit] [ 0.338954] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.339066] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.339465] pci 0000:00:1a.0: reg 0x10: [mem 0xc130a000-0xc130a3ff] [ 0.341716] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.341828] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.341857] pci 0000:00:1b.0: reg 0x10: [mem 0xc1300000-0xc1303fff 64bit] [ 0.341983] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.342045] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.342098] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.342222] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.342283] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.342335] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.342459] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.342566] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.342689] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.342749] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.342808] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.343192] pci 0000:00:1d.0: reg 0x10: [mem 0xc1309000-0xc13093ff] [ 0.345453] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.345523] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.345575] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.345815] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.345842] pci 0000:00:1f.2: reg 0x10: [io 0x4058-0x405f] [ 0.345855] pci 0000:00:1f.2: reg 0x14: [io 0x407c-0x407f] [ 0.345868] pci 0000:00:1f.2: reg 0x18: [io 0x4050-0x4057] [ 0.345881] pci 0000:00:1f.2: reg 0x1c: [io 0x4078-0x407b] [ 0.345894] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.345907] pci 0000:00:1f.2: reg 0x24: [mem 0xc1308000-0xc13087ff] [ 0.345984] pci 0000:00:1f.2: PME# supported from D3hot [ 0.346078] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.346103] pci 0000:00:1f.3: reg 0x10: [mem 0xc1306000-0xc13060ff 64bit] [ 0.346139] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.346311] pci 0000:01:00.0: [1002:68a8] type 00 class 0x030000 [ 0.346333] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.346349] pci 0000:01:00.0: reg 0x18: [mem 0xc0300000-0xc031ffff 64bit] [ 0.346359] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.346378] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.346432] pci 0000:01:00.0: supports D1 D2 [ 0.346455] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.346507] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300 [ 0.346529] pci 0000:01:00.1: reg 0x10: [mem 0xc0320000-0xc0323fff 64bit] [ 0.346626] pci 0000:01:00.1: supports D1 D2 [ 0.361803] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.361819] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.361824] pci 0000:00:01.0: bridge window [mem 0xc0300000-0xc12fffff] [ 0.361832] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.361967] pci 0000:02:00.0: [1969:1083] type 00 class 0x020000 [ 0.362006] pci 0000:02:00.0: reg 0x10: [mem 0xc0200000-0xc023ffff 64bit] [ 0.362024] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.362197] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.362252] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.377820] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.377837] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.377845] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc02fffff] [ 0.378015] pci 0000:03:00.0: [14e4:4358] type 00 class 0x028000 [ 0.378055] pci 0000:03:00.0: reg 0x10: [mem 0xc0100000-0xc0103fff 64bit] [ 0.378270] pci 0000:03:00.0: supports D1 D2 [ 0.378271] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.378338] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.393861] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.393883] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc01fffff] [ 0.394084] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.394154] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xc0001fff 64bit] [ 0.394512] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.394615] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.409898] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.409920] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff] [ 0.474205] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.474271] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.474336] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.474398] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.474459] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.474523] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.474585] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.474646] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.474748] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.474802] ACPI : EC: interrupt unblocked [ 0.474815] ACPI : EC: event unblocked [ 0.474826] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.474832] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.474991] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.474996] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.475002] vgaarb: loaded [ 0.475006] vgaarb: bridge control possible 0000:01:00.0 [ 0.475077] PCI: Using ACPI for IRQ routing [ 0.488477] PCI: pci_cache_line_size set to 64 bytes [ 0.488622] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.488623] e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff] [ 0.488624] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] [ 0.488625] e820: reserve RAM buffer [mem 0x24f800000-0x24fffffff] [ 0.488796] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.488806] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.490833] clocksource: Switched to clocksource hpet [ 0.497355] VFS: Disk quotas dquot_6.6.0 [ 0.497393] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.497489] pnp: PnP ACPI init [ 0.497647] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.497652] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.497657] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.497662] system 00:00: [io 0xffff] has been reserved [ 0.497666] system 00:00: [io 0xffff] has been reserved [ 0.497671] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.497675] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.497680] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.497687] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.497718] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.497769] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.497775] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.497815] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.497863] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.551102] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.551109] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.551114] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.551118] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.551123] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.551128] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.551133] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.551138] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.551142] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.551147] system 00:05: [mem 0xc1400000-0xc1400fff] has been reserved [ 0.551153] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.551372] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.551377] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved [ 0.551382] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.551399] pnp: PnP ACPI: found 7 devices [ 0.558071] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.558082] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.558133] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0340000-0xc035ffff pref] [ 0.558140] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.558145] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.558151] pci 0000:00:01.0: bridge window [mem 0xc0300000-0xc12fffff] [ 0.558157] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.558165] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.558171] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.558180] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc02fffff] [ 0.558195] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.558204] pci 0000:00:1c.1: bridge window [mem 0xc0100000-0xc01fffff] [ 0.558217] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.558227] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc00fffff] [ 0.558242] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.558244] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.558245] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.558247] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 0.558248] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.558249] pci_bus 0000:01: resource 1 [mem 0xc0300000-0xc12fffff] [ 0.558250] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.558252] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.558253] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc02fffff] [ 0.558254] pci_bus 0000:03: resource 1 [mem 0xc0100000-0xc01fffff] [ 0.558256] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc00fffff] [ 0.558371] NET: Registered protocol family 2 [ 0.558582] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.558734] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.558882] TCP: Hash tables configured (established 65536 bind 65536) [ 0.558908] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.558939] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.559011] NET: Registered protocol family 1 [ 0.599014] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.599026] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.600919] PCI: CLS 64 bytes, default 64 [ 0.600968] Unpacking initramfs... [ 0.696724] Freeing initrd memory: 5164K [ 0.696736] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.696742] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [ffff939feb63f000-ffff939fef63efff] [ 0.697209] audit: initializing netlink subsys (disabled) [ 0.697233] audit: type=2000 audit(1518630767.652:1): initialized [ 0.697682] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.697768] zbud: loaded [ 0.698526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.698568] io scheduler noop registered [ 0.698572] io scheduler deadline registered [ 0.698588] io scheduler cfq registered (default) [ 0.699200] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.699210] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.699222] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 0.699226] vesafb: scrolling: redraw [ 0.699230] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.699240] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override. [ 0.699257] vesafb: framebuffer at 0xb0000000, mapped to 0xffffa6a941800000, using 5632k, total 5632k [ 0.783557] Console: switching to colour frame buffer device 200x56 [ 0.868103] fb0: VESA VGA frame buffer device [ 0.868501] intel_idle: MWAIT substates: 0x21120 [ 0.868502] intel_idle: v0.4.1 model 0x2A [ 0.868848] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.869245] GHES: HEST is not enabled! [ 0.869632] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.870648] Linux agpgart interface v0.103 [ 0.871083] AMD IOMMUv2 driver by Joerg Roedel [ 0.871602] AMD IOMMUv2 functionality not available on this system [ 0.872835] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.931348] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.931781] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.932395] mousedev: PS/2 mouse device common for all mice [ 0.934752] rtc_cmos 00:01: RTC can wake from S4 [ 0.935394] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.935949] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.936606] intel_pstate: Intel P-state driver initializing [ 0.937677] ledtrig-cpu: registered to indicate activity on CPUs [ 0.940215] NET: Registered protocol family 10 [ 0.941875] mip6: Mobile IPv6 [ 0.942528] NET: Registered protocol family 17 [ 0.943519] mpls_gso: MPLS GSO support [ 0.945217] microcode: sig=0x206a7, pf=0x10, revision=0x29 [ 0.946721] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.949433] registered taskstats version 1 [ 0.950283] zswap: loaded using pool lzo/zbud [ 0.951706] ima: No TPM chip found, activating TPM-bypass! [ 0.953398] rtc_cmos 00:01: setting system clock to 2018-02-14 17:52:48 UTC (1518630768) [ 0.955129] PM: Hibernation image not present or could not be loaded. [ 0.958384] Freeing unused kernel memory: 1408K [ 0.959281] Write protecting the kernel read-only data: 12288k [ 0.961462] Freeing unused kernel memory: 1980K [ 0.969236] Freeing unused kernel memory: 1248K [ 0.982359] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.002588] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.135637] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.138548] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.138639] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.141776] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.141928] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.141966] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.142737] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.142937] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.143088] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.143218] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.702753] tsc: Refined TSC clocksource calibration: 2195.013 MHz [ 1.724880] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns [ 1.744587] AVX version of gcm_enc/dec engaged. [ 1.762068] AES CTR mode by8 optimization enabled [ 1.779543] ACPI: bus type USB registered [ 1.779569] SCSI subsystem initialized [ 1.812795] usbcore: registered new interface driver usbfs [ 1.829647] usbcore: registered new interface driver hub [ 1.845765] usbcore: registered new device driver usb [ 1.862658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.878453] ehci-pci: EHCI PCI platform driver [ 1.878461] libata version 3.00 loaded. [ 1.894260] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.909480] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.924762] ehci-pci 0000:00:1a.0: debug port 2 [ 1.943824] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.943836] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc130a000 [ 1.974811] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.008597] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.058684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.108822] usb usb1: Product: EHCI Host Controller [ 2.158106] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd [ 2.207073] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.256983] hub 1-0:1.0: USB hub found [ 2.306178] hub 1-0:1.0: 2 ports detected [ 2.355477] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.404563] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.453905] ehci-pci 0000:00:1d.0: debug port 2 [ 2.506068] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.506100] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1309000 [ 2.566763] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.614492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.662822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.711423] usb usb2: Product: EHCI Host Controller [ 2.759665] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd [ 2.807214] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.855327] clocksource: Switched to clocksource tsc [ 2.855919] hub 2-0:1.0: USB hub found [ 2.855936] hub 2-0:1.0: 2 ports detected [ 2.856345] ahci 0000:00:1f.2: version 3.0 [ 2.856795] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.866933] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 2.866938] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 2.891873] scsi host0: ahci [ 2.892197] scsi host1: ahci [ 2.892420] scsi host2: ahci [ 2.892631] scsi host3: ahci [ 2.892842] scsi host4: ahci [ 2.893046] scsi host5: ahci [ 2.893189] ata1: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308100 irq 25 [ 2.893193] ata2: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308180 irq 25 [ 2.893197] ata3: SATA max UDMA/133 abar m2048@0xc1308000 port 0xc1308200 irq 25 [ 2.893198] ata4: DUMMY [ 2.893200] ata5: DUMMY [ 2.893202] ata6: DUMMY [ 2.914632] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.182675] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.225421] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.270722] ata1.00: supports DRM functions and may not be fully accessible [ 3.301908] ata1.00: disabling queued TRIM support [ 3.301913] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 [ 3.347061] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.391732] ata1.00: supports DRM functions and may not be fully accessible [ 3.391745] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.391750] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.523939] hub 1-1:1.0: USB hub found [ 3.524169] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.524174] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.524781] hub 2-1:1.0: USB hub found [ 3.524932] hub 2-1:1.0: 6 ports detected [ 3.525895] ata1.00: disabling queued TRIM support [ 3.525906] ata1.00: configured for UDMA/133 [ 3.526753] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 3.814590] usb 2-1.2: new full-speed USB device number 3 using ehci-pci [ 3.881562] hub 1-1:1.0: 6 ports detected [ 3.926379] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c534 [ 3.926383] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.926387] usb 2-1.2: Product: USB Receiver [ 3.926390] usb 2-1.2: Manufacturer: Logitech [ 4.040155] hidraw: raw HID events driver (C) Jiri Kosina [ 4.059549] usbcore: registered new interface driver usbhid [ 4.074112] usbhid: USB HID core driver [ 4.089118] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C534.0001/input/input2 [ 4.163141] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 [ 4.215071] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C534.0002/input/input3 [ 4.327594] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 [ 4.346567] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 4.409643] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.518929] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d250 [ 4.568425] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.623668] usb 1-1.3: Product: 1.3M HD WebCam [ 4.678555] usb 1-1.3: Manufacturer: SuYin [ 4.712818] ata2.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133 [ 4.712822] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.714301] ata2.00: configured for UDMA/133 [ 4.715074] scsi 1:0:0:0: Direct-Access ATA HGST HTS721010A9 A3B0 PQ: 0 ANSI: 5 [ 4.955687] usb 1-1.3: SerialNumber: HF1316-A821-HN01-VA-R01.00.02 [ 5.094535] usb 1-1.6: new full-speed USB device number 4 using ehci-pci [ 5.262964] random: fast init done [ 5.321060] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e010 [ 5.369459] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.371182] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100 [ 5.373404] ata3.00: configured for UDMA/100 [ 5.375930] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B0 1.00 PQ: 0 ANSI: 5 [ 5.554743] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.602604] usb 1-1.6: Product: Acer Module [ 5.639261] usb 1-1.6: Manufacturer: Broadcom Corp [ 5.670008] usb 1-1.6: SerialNumber: 9439E599252A [ 5.670243] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 5.670294] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.670297] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 5.670506] sd 1:0:0:0: [sdb] Write Protect is off [ 5.670516] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.670659] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.670679] sd 0:0:0:0: [sda] Write Protect is off [ 5.670685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.670801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.673851] sda: sda1 sda2 < sda5 sda6 > [ 5.674708] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.953012] sdb: sdb1 sdb2 < sdb5 > [ 5.954302] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.779094] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 7.078092] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 7.152611] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.221033] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 7.364030] systemd[1]: Detected architecture x86-64. [ 7.574222] systemd[1]: Set hostname to . [ 7.677133] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.777255] systemd[1]: Reached target Remote File Systems. [ 7.876406] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.977452] systemd[1]: Listening on udev Control Socket. [ 8.078475] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.181542] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.286525] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.779474] lp: driver loaded but no devices found [ 8.780396] ppdev: user-space parallel port driver [ 8.877077] EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro [ 9.263418] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input4 [ 9.263464] ACPI: Power Button [PWRB] [ 9.263561] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input5 [ 9.263615] ACPI: Lid Switch [LID0] [ 9.263672] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input6 [ 9.263714] ACPI: Sleep Button [SLPB] [ 9.263782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 9.263821] ACPI: Power Button [PWRF] [ 9.266285] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 9.266514] wmi: Mapper loaded [ 9.433408] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 9.469692] systemd-journald[258]: Received request to flush runtime journal from PID 1 [ 9.470359] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.470413] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 9.470458] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 9.485154] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247) [ 9.485156] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.485161] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 9.485161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.485164] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 9.485165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.485167] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 9.485168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.485168] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.502079] ACPI: AC Adapter [ACAD] (on-line) [ 9.617152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.775936] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.799579] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.799580] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.799581] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 9.874075] media: Linux media interface: v0.10 [ 9.875242] bcma: bus0: Found chip with id 43227, rev 0x00 and package 0x08 [ 9.875286] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 9.875299] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 9.875312] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 9.875357] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 9.875380] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 9.884204] acpi device:35: registered as cooling_device8 [ 9.884284] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input10 [ 9.884377] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 9.887442] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.887444] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.887564] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 9.890122] bcma: bus0: Bus registered [ 9.934051] ACPI: Battery Slot [BAT0] (battery present) [ 10.126734] Linux video capture interface: v2.00 [ 10.386951] Bluetooth: Core ver 2.22 [ 10.386965] NET: Registered protocol family 31 [ 10.386966] Bluetooth: HCI device and connection manager initialized [ 10.386969] Bluetooth: HCI socket layer initialized [ 10.386971] Bluetooth: L2CAP socket layer initialized [ 10.386981] Bluetooth: SCO socket layer initialized [ 10.387053] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 10.387060] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 10.387273] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 10.387892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.387894] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.387895] usb usb3: Product: xHCI Host Controller [ 10.387897] usb usb3: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 10.387898] usb usb3: SerialNumber: 0000:05:00.0 [ 10.390178] hub 3-0:1.0: USB hub found [ 10.390195] hub 3-0:1.0: 2 ports detected [ 10.390330] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 10.390334] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 10.390683] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.390723] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 10.390724] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.390725] usb usb4: Product: xHCI Host Controller [ 10.390726] usb usb4: Manufacturer: Linux 4.9.0-5-amd64 xhci-hcd [ 10.390727] usb usb4: SerialNumber: 0000:05:00.0 [ 10.390810] [drm] Initialized [ 10.390908] hub 4-0:1.0: USB hub found [ 10.390924] hub 4-0:1.0: 2 ports detected [ 10.398898] usbcore: registered new interface driver btusb [ 10.399219] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d250) [ 10.401171] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 10.404746] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 10.404749] uvcvideo 1-1.3:1.0: Entity type for entity Extension 6 was not initialized! [ 10.404751] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 10.404851] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11 [ 10.404951] usbcore: registered new interface driver uvcvideo [ 10.404951] USB Video Class driver (1.1.1) [ 10.423215] atl1c 0000:02:00.0: version 1.0.1.1-NAPI [ 10.722363] iTCO_vendor_support: vendor-support=0 [ 10.736671] atl1c 0000:02:00.0 enp2s0: renamed from eth0 [ 11.221356] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01) [ 11.224644] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.224692] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 11.224806] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.274048] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 11.297981] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a. [ 11.349830] psmouse serio1: elantech: Elan sample query result 04, 0b, 00 [ 11.434402] acer_wmi: Acer Laptop ACPI-WMI Extras [ 11.434413] acer_wmi: Function bitmap for Communication Button: 0x801 [ 11.434677] [drm] radeon kernel modesetting enabled. [ 11.439197] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 11.439778] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.439780] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.439781] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.439783] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.439784] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.439786] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b [ 11.439787] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 11.442216] intel_rapl: Found RAPL domain package [ 11.442219] intel_rapl: Found RAPL domain core [ 11.442230] intel_rapl: RAPL package 0 domain package locked by BIOS [ 11.534492] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.534606] input: Acer WMI hotkeys as /devices/virtual/input/input16 [ 11.536961] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.537114] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 11.537129] input: Acer BMA150 accelerometer as /devices/virtual/input/input17 [ 11.635289] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 11.875456] random: crng init done [ 12.022230] b43-phy0: Broadcom 43227 WLAN found (core revision 30) [ 12.022691] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 [ 12.022705] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 [ 12.023349] Broadcom 43xx driver loaded [ Features: PNLS ] [ 12.026687] b43 bcma0:1: firmware: direct-loading firmware b43/ucode30_mimo.fw [ 12.026960] b43 bcma0:1: firmware: direct-loading firmware b43/n16initvals30.fw [ 12.027182] b43 bcma0:1: firmware: direct-loading firmware b43/n16bsinitvals30.fw [ 12.467567] CRAT table not found [ 12.467570] Finished initializing topology ret=0 [ 12.467617] kfd kfd: Initialized module [ 12.538357] checking generic (b0000000 580000) vs hw (b0000000 10000000) [ 12.538359] fb: switching to radeondrmfb from VESA VGA [ 12.667374] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.672981] b43 bcma0:1 wlp3s0b1: renamed from wlan0 [ 13.884168] Console: switching to colour dummy device 80x25 [ 13.885254] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68A8 0x1025:0x050E 0x00). [ 13.885298] [drm] register mmio base: 0xC0300000 [ 13.885305] [drm] register mmio size: 131072 [ 13.885364] ATOM BIOS: Acer [ 13.885459] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 13.885471] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 13.885484] [drm] Detected VRAM RAM=1024M, BAR=256M [ 13.885490] [drm] RAM width 128bits DDR [ 13.885685] [TTM] Zone kernel: Available graphics memory: 4080368 kiB [ 13.885693] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 13.885700] [TTM] Initializing pool allocator [ 13.885713] [TTM] Initializing DMA pool allocator [ 13.885749] [drm] radeon: 1024M of VRAM memory ready [ 13.885757] [drm] radeon: 1024M of GTT memory ready. [ 13.885780] [drm] Loading JUNIPER Microcode [ 13.888244] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_pfp.bin [ 13.888855] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_me.bin [ 13.889080] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_rlc.bin [ 13.889370] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_smc.bin [ 13.889396] [drm] Internal thermal controller with fan control [ 13.918304] [drm] radeon: dpm initialized [ 13.918976] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin [ 13.919068] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 13.919664] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 13.935337] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 13.935448] radeon 0000:01:00.0: WB enabled [ 13.935453] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff93a184032c00 [ 13.935459] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff93a184032c0c [ 13.935829] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffa6a94221c418 [ 13.935835] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.935838] [drm] Driver supports precise vblank timestamp query. [ 13.935841] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 13.935886] radeon 0000:01:00.0: radeon: using MSI. [ 13.935913] [drm] radeon: irq initialized. [ 13.940071] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard [ 13.952368] [drm] ring test on 0 succeeded in 1 usecs [ 13.952383] [drm] ring test on 3 succeeded in 4 usecs [ 14.128619] [drm] ring test on 5 succeeded in 2 usecs [ 14.128628] [drm] UVD initialized successfully. [ 14.128826] [drm] ib test on ring 0 succeeded in 0 usecs [ 14.128858] [drm] ib test on ring 3 succeeded in 0 usecs [ 14.523936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.523943] Bluetooth: BNEP filters: protocol multicast [ 14.523949] Bluetooth: BNEP socket layer initialized [ 14.821772] [drm] ib test on ring 5 succeeded [ 14.822595] [drm] Radeon Display Connectors [ 14.822602] [drm] Connector 0: [ 14.822606] [drm] LVDS-1 [ 14.822611] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 14.822619] [drm] Encoders: [ 14.822623] [drm] LCD1: INTERNAL_UNIPHY [ 14.822628] [drm] Connector 1: [ 14.822632] [drm] HDMI-A-1 [ 14.822636] [drm] HPD1 [ 14.822641] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 14.822648] [drm] Encoders: [ 14.822652] [drm] DFP1: INTERNAL_UNIPHY1 [ 14.822657] [drm] Connector 2: [ 14.822661] [drm] VGA-1 [ 14.822665] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 14.822673] [drm] Encoders: [ 14.822677] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 14.932785] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 14.955999] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 14.964698] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready [ 15.125633] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 15.290237] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready [ 15.509601] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 15.673696] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready [ 15.766592] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready [ 16.561602] [drm] fb mappable at 0xB034D000 [ 16.561616] [drm] vram apper at 0xB0000000 [ 16.561622] [drm] size 5787648 [ 16.561629] [drm] fb depth is 24 [ 16.561635] [drm] pitch is 6400 [ 16.561948] fbcon: radeondrmfb (fb0) is primary device [ 17.053456] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 17.217558] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready [ 17.276698] wlp3s0b1: authenticate with 90:f6:52:6a:37:dc [ 17.305635] wlp3s0b1: send auth to 90:f6:52:6a:37:dc (try 1/3) [ 17.307379] wlp3s0b1: authenticated [ 17.309367] wlp3s0b1: associate with 90:f6:52:6a:37:dc (try 1/3) [ 17.313002] wlp3s0b1: RX AssocResp from 90:f6:52:6a:37:dc (capab=0x431 status=0 aid=1) [ 17.313473] wlp3s0b1: associated [ 17.313559] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready [ 23.612999] Console: switching to colour frame buffer device 200x56 [ 23.623509] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 23.864816] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0 [ 58.812364] fuse init (API version 7.26) [ 58.994333] Bluetooth: RFCOMM TTY layer initialized [ 58.994340] Bluetooth: RFCOMM socket layer initialized [ 58.994344] Bluetooth: RFCOMM ver 1.11