=> fatload mmc 0:1 0x80200000 boot.scr; source 0x80200000 2225 bytes read in 13 ms (167 KiB/s) ## Executing script at 80200000 918864 bytes read in 56 ms (15.6 MiB/s) 6514696 bytes read in 305 ms (20.4 MiB/s) 64575272 bytes read in 2898 ms (21.2 MiB/s) 6514696 bytes read in 306 ms (20.3 MiB/s) 64575272 bytes read in 2898 ms (21.2 MiB/s) 1101 bytes read in 13 ms (82 KiB/s) 20829 bytes read in 16 ms (1.2 MiB/s) ## Flattened Device Tree blob at 89400000 Booting using the fdt blob at 0x89400000 reserving fdt memory region: addr=8000fff8 size=10000 reserving fdt memory region: addr=89400000 size=6000 Loading Device Tree to 00000000ffb24000, end 00000000ffb2cfff ... OK Reserving 2048k off the top of ddr@0x80000000 for protected RAM; new size=0x7fe00000 Starting kernel ... - UART enabled - - Boot CPU booting - - Current EL 00000008 - - Initialize CPU - - Turning on paging - - Zero BSS - - Ready - (XEN) Checking for initrd in /chosen (XEN) RAM: 0000000080000000 - 00000000ffdfffff (XEN) (XEN) MODULE[0]: 0000000080400000 - 00000000805228f0 Xen (XEN) MODULE[1]: 00000000ffb24000 - 00000000ffb2a000 Device Tree (XEN) MODULE[2]: 0000000089200000 - 000000008920044d DTB (XEN) MODULE[3]: 0000000085400000 - 0000000089195728 Ramdisk (XEN) MODULE[4]: 0000000084c00000 - 0000000085236808 Kernel (XEN) MODULE[5]: 0000000080e00000 - 0000000084b95728 Ramdisk (XEN) MODULE[6]: 0000000080600000 - 0000000080c36808 Kernel (XEN) RESVD[0]: 000000008000fff8 - 000000008001fff8 (XEN) RESVD[1]: 0000000089400000 - 0000000089406000 (XEN) RESVD[2]: 00000000ffb24000 - 00000000ffb2a000 (XEN) RESVD[3]: 0000000083400000 - 0000000083ffffff (XEN) (XEN) CMDLINE[0000000084c00000]:domU0 console=ttyAMA0 root=/dev/ram0 (XEN) (XEN) Command line: console=ttyLF0 dom0_mem=512M dom0_max_vcpus=1 bootscrub=0 vwfi=native sched=null sync_console=true (XEN) Domain heap initialised (XEN) Booting using Device Tree (XEN) Bad console= option 'ttyLF0' Xen 4.13.0 (XEN) Xen version 4.13.0 (nxf47233@) (aarch64-fsl-linux-gcc (Linaro GCC 6.3-2017.06~dev) 6.3.1 20170509) debug=n Thu Feb 6 16:31:16 UTC 2020 (XEN) Latest ChangeSet: Tue Jan 21 20:07:17 2020 +0200 git:44cee87-dirty (XEN) Console output is synchronous. (XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4 (XEN) 64-bit Execution: (XEN) Processor Features: 0000000001002222 0000000000000000 (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32 (XEN) Extensions: FloatingPoint AdvancedSIMD GICv3-SysReg (XEN) Debug Features: 0000000010305106 0000000000000000 (XEN) Auxiliary Features: 0000000000000000 0000000000000000 (XEN) Memory Model Features: 0000000000001122 0000000000000000 (XEN) ISA Features: 0000000000011120 0000000000000000 (XEN) 32-bit Execution: (XEN) Processor Features: 00000131:10011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 03010066 (XEN) Auxiliary Features: 00000000 (XEN) Memory Model Features: 10201105 40000000 01260000 02102211 (XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 5000 KHz (XEN) GICv3 initialization: (XEN) gic_dist_addr=0x00000050800000 (XEN) gic_maintenance_irq=25 (XEN) gic_rdist_stride=0 (XEN) gic_rdist_regions=1 (XEN) redistributor regions: (XEN) - region 0: 0x00000050880000 - 0x00000050a80000 (XEN) GICv3 compatible with GICv2 cbase 0x00000050400000 vbase 0x00000050420000 (XEN) GICv3: 576 lines, (IID 0001143b). (XEN) GICv3: CPU0: Found redistributor in region 0 @000000004001a000 (XEN) XSM Framework v1.0.0 initialized (XEN) Initialising XSM SILO mode (XEN) Using scheduler: null Scheduler (null) (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) Allocated console ring of 16 KiB. (XEN) Bringing up CPU1 - CPU 00000001 booting - - Current EL 00000008 - - Initialize CPU - - Turning on paging - - Ready - (XEN) GICv3: CPU1: Found redistributor in region 0 @000000004003a000 (XEN) Bringing up CPU2 - CPU 00000100 booting - - Current EL 00000008 - - Initialize CPU - - Turning on paging - - Ready - (XEN) GICv3: CPU2: Found redistributor in region 0 @000000004005a000 (XEN) Bringing up CPU3 - CPU 00000101 booting - - Current EL 00000008 - - Initialize CPU - - Turning on paging - - Ready - (XEN) GICv3: CPU3: Found redistributor in region 0 @000000004007a000 (XEN) Brought up 4 CPUs (XEN) I/O virtualisation disabled (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID (XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558 (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading d0 kernel from boot module @ 0000000080600000 (XEN) Loading ramdisk from boot module @ 0000000080e00000 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: (XEN) BANK[0] 0x000000c0000000-0x000000e0000000 (512MB) (XEN) Grant table range: 0x00000080400000-0x00000080440000 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Loading zImage from 0000000080600000 to 00000000c0080000-00000000c06b6808 (XEN) Loading d0 initrd from 0000000080e00000 to 0x00000000c8200000-0x00000000cbf95728 (XEN) Loading d0 DTB to 0x00000000c8000000-0x00000000c80050fe (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *************************************************** (XEN) WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) This option is intended to aid debugging of Xen by ensuring (XEN) that all output is synchronously delivered on the serial line. (XEN) However it can introduce SIGNIFICANT latencies and affect (XEN) timekeeping. It is NOT recommended for production use! (XEN) *************************************************** (XEN) 3... 2... 1... (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input) (XEN) *** LOADING DOMU cpus=1 memory=80000KB *** (XEN) Loading d1 kernel from boot module @ 0000000084c00000 (XEN) Loading ramdisk from boot module @ 0000000085400000 (XEN) Allocating 1:1 mappings totalling 512MB for dom1: (XEN) BANK[0] 0x000000a0000000-0x000000c0000000 (512MB) (XEN) Loading zImage from 0000000084c00000 to 00000000a0080000-00000000a06b6808 (XEN) Loading d1 initrd from 0000000085400000 to 0x00000000a8200000-0x00000000abf95728 (XEN) Loading d1 DTB to 0x00000000a8000000-0x00000000a8000799 (XEN) Freed 328kB init memory. (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16 (XEN) d1v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20 (XEN) d1v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24 (XEN) d1v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.59-rt24+g00334f2 (oe-user@oe-host) (gcc version 6.3.1 20170509 (Lin aro GCC 6.3-2017.06~dev)) #1 SMP PREEMPT Tue Jan 28 12:58:21 UTC 2020 [ 0.000000] Machine model: Freescale S32G275 [ 0.000000] Xen 4.13 support found [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from 0xffffff8008600918 with crng_init=0 [ 0.000000] percpu: Embedded 21 pages/cpu s45336 r8192 d32488(XEN) DOM1: [ 0.000000] Booting Li nux on physical CPU 0x0000000000 [0x410fd034] u86016 [ 0.000000] D(XEN) DOM1: [ 0.000000] Linux version 4.19.59-rt24+g00334f2 (oe-user@oe-host) (gcc version 6.3.1 20170509 (Linaro GCC 6.3-2017.06~dev)) etected VIPT I-c(XEN) DOM1: #1 SMP PREEMPT Tue Jan 28 12:58:21 UTC 2020 ache on CPU0 (XEN) DOM1: [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] C(XEN) DOM1: [ 0.000000] psci: PSCIv1.1 detected in firmware. PU features: ena(XEN) DOM1: [ 0.000000] psci: Using standard PSCI v0.2 function IDs bling workaround(XEN) DOM1: [ 0.000000] psci: Trusted OS migration not required for ARM erratum(XEN) DOM1: [ 0.000000] psci: SMC Calling Convention v1.1 845719 (XEN) DOM1: [ 0.000000] random: get_random_bytes called from 0xffffff8008600918 with crng_init=0 [ 0.000000] C(XEN) DOM1: [ 0.000000] percpu: Embedded 21 pages/cpu s45336 r8192 d32488 u86016 PU features: ena(XEN) DOM1: [ 0.000000] Detected VIPT I-cache on CPU0 bling workaround(XEN) DOM1: [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 for Speculative(XEN) DOM1: [ 0.000000] CPU features: enabling workaround for Speculative Store Bypass Disable Store Bypass Di(XEN) DOM1: [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) sable (XEN) DOM1: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129280 [ 0.000000] C(XEN) DOM1: [ 0.000000] Kernel command line: console=ttyAMA0 root=/dev/ram0 PU features: det(XEN) DOM1: [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) ected: Kernel pa(XEN) DOM1: [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) ge table isolati(XEN) DOM1: [ 0.000000] Memory: 439348K/524288K available (4734K kernel code, 282K rwdata, 852K rodata, 448K init, 195K bss, 84940K res on (KPTI) (XEN) DOM1: erved, 0K cma-reserved) [ 0.000000] B(XEN) DOM1: [ 0.000000] rcu: Preemptible hierarchical RCU implementation. uilt 1 zonelists(XEN) DOM1: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. , mobility group(XEN) DOM1: [ 0.000000] Tasks RCU enabled. ing on. Total p(XEN) DOM1: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 ages: 129280 (XEN) DOM1: [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] K(XEN) DOM1: [ 0.000000] GICv3: Distributor has no Range Selector support ernel command li(XEN) DOM1: [ 0.000000] GICv3: no VLPI support, no direct LPI support ne: console=hvc0(XEN) DOM1: [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000050880000 earlycon=xen ea(XEN) DOM1: [ 0.000000] arch_timer: cp15 timer(s) running at 5.00MHz (virt). rlyprintk=xen ro(XEN) DOM1: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x127350b88, max_idle_ns: 440795202120 ns ot=/dev/ram0 (XEN) DOM1: [ 0.000005] sched_clock: 56 bits at 5MHz, resolution 200ns, wraps every 4398046511100ns [ 0.000000] D(XEN) DOM1: [ 0.000159] Console: colour dummy device 80x25 entry cache hash(XEN) DOM1: [ 0.000190] Calibrating delay loop (skipped), value calculated using timer frequency.. 10.00 BogoMIPS (lpj=20000) table entries: (XEN) DOM1: [ 0.000201] pid_max: default: 32768 minimum: 301 65536 (order: 7,(XEN) DOM1: [ 0.000317] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) 524288 bytes) (XEN) DOM1: [ 0.000327] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] I(XEN) DOM1: [ 0.024104] ASID allocator initialised with 32768 entries node-cache hash (XEN) DOM1: [ 0.032105] rcu: Hierarchical SRCU implementation. table entries: 3(XEN) DOM1: [ 0.056163] smp: Bringing up secondary CPUs ... 2768 (order: 6, (XEN) DOM1: [ 0.056171] smp: Brought up 1 node, 1 CPU 262144 bytes) (XEN) DOM1: [ 0.056176] SMP: Total of 1 processors activated. [ 0.000000] M(XEN) DOM1: [ 0.056189] CPU features: detected: GIC system register CPU interface emory: 439164K/5(XEN) DOM1: [ 0.056196] CPU features: detected: 32-bit EL0 Support 24288K available(XEN) DOM1: [ 0.060090] CPU: All CPU(s) started at EL1 (4734K kernel c(XEN) DOM1: [ 0.060102] alternatives: patching kernel code ode, 282K rwdata(XEN) DOM1: [ 0.060857] devtmpfs: initialized , 852K rodata, 4(XEN) DOM1: [ 0.064560] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 48K init, 195K b(XEN) DOM1: [ 0.064575] futex hash table entries: 256 (order: 2, 16384 bytes) ss, 85124K reser(XEN) DOM1: [ 0.064651] pinctrl core: initialized pinctrl subsystem ved, 0K cma-rese(XEN) DOM1: [ 0.065128] NET: Registered protocol family 16 rved) (XEN) DOM1: [ 0.065619] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.000000] r(XEN) DOM1: [ 0.065759] DMA: preallocated 256 KiB pool for atomic allocations cu: Preemptible (XEN) DOM1: [ 0.065813] Serial: AMBA PL011 UART driver hierarchical RCU(XEN) DOM1: [ 0.066587] 401c8000.sbsa-uart: ttyAMA0 at MMIO 0x401c8000 (irq = 5, base_baud = 0) is a SBSA implementation.(XEN) DOM1: [ 0.525465] console [ttyAMA0] enabled [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting ge(XEN) DOM1: [ 0.544177] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 (XEN) DOM1: [ 0.560740] pps_core: LinuxPPS API ver. 1 registered [ 0.000000] G(XEN) DOM1: [ 0.568834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti ICv3: Distributo(XEN) DOM1: [ 0.579615] PTP clock support registered (XEN) DOM1: [ 0.587324] clocksource: Switched to clocksource arch_sys_counter [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000050880000 (XEN) DOM1: [ 0.607769] NET: Registered protocol family 2 [ 0.000000] arch_timer: cp15 (XEN) DOM1: [ 0.615911] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) timer(s) running(XEN) DOM1: [ 0.625593] TCP established hash table entries: 4096 (order: 3, 32768 bytes) at 5.00MHz (vir(XEN) DOM1: [ 0.635412] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) t). [ 0.000000] c(XEN) DOM1: [ 0.644402] TCP: Hash tables configured (established 4096 bind 4096) locksource: arch(XEN) DOM1: [ 0.653510] UDP hash table entries: 256 (order: 1, 8192 bytes) _sys_counter: ma(XEN) DOM1: [ 0.662109] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) sk: 0xffffffffff(XEN) DOM1: [ 0.670657] NET: Registered protocol family 1 ffff max_cycles:(XEN) DOM1: [ 0.677868] Unpacking initramfs... 0x127350b88, max_idle_ns: 440795202120 ns [ 0.000005] sched_clock: 56 bits at 5MHz, resolution 200ns, wraps every 4398046511100ns [ 0.000290] Console: colour dummy device 80x25 [ 0.698903] console [hvc0] enabled [ 0.702399] Calibrating delay loop (skipped), value calculated using timer frequency.. 10.00 BogoMIPS (lpj=20000) [ 0.712708] pid_max: default: 32768 minimum: 301 [ 0.717507] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.724082] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.755300] ASID allocator initialised with 32768 entries [ 0.760945] xen:grant_table: Grant tables using version 1 layout [ 0.766722] Grant table initialized [ 0.770271] xen:events: Using FIFO-based ABI [ 0.774638] Xen: initializing cpu0 [ 0.782630] rcu: Hierarchical SRCU implementation. [ 0.811250] smp: Bringing up secondary CPUs ... [ 0.815539] smp: Brought up 1 node, 1 CPU [ 0.819609] SMP: Total of 1 processors activated. [ 0.824388] CPU features: detected: GIC system register CPU interface [ 0.830893] CPU features: detected: 32-bit EL0 Support [ 0.838797] CPU: All CPU(s) started at EL1 [ 0.842645] alternatives: patching kernel code [ 0.847906] devtmpfs: initialized [ 0.855649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785 [ 0.865182] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.871473] pinctrl core: initialized pinctrl subsystem [ 0.877489] NET: Registered protocol family 16 [ 0.883304] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.890957] DMA: preallocated 256 KiB pool for atomic allocations [ 0.896954] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB [ 0.905804] software IO TLB: mapped [mem 0xde000000-0xde400000] (4MB) [ 0.912185] Serial: AMBA PL011 UART driver [ 0.945105] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.968996] xen:balloon: Initialising balloon driver [ 0.975077] pps_core: LinuxPPS API ver. 1 registered [ 0.980460] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.989429] PTP clock support registered [ 0.994764] clocksource: Switched to clocksource arch_sys_counter [ 1.013353] NET: Registered protocol family 2 [ 1.018463] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 1.026256] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.033109] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 1.039799] TCP: Hash tables configured (established 4096 bind 4096) [ 1.046089] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.052195] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.058374] NET: Registered protocol family 1 [ 1.063043] Unpacking initramfs... (XEN) DOM1: [ 3.793172] Freeing initrd memory: 63060K (XEN) DOM1: [ 3.799982] workingset: timestamp_bits=62 max_order=17 bucket_order=0 (XEN) DOM1: [ 3.808570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) (XEN) DOM1: [ 3.817226] io scheduler noop registered (XEN) DOM1: [ 3.822053] io scheduler deadline registered (XEN) DOM1: [ 3.827537] io scheduler cfq registered (default) (XEN) DOM1: [ 3.833248] io scheduler mq-deadline registered (XEN) DOM1: [ 3.838897] io scheduler kyber registered (XEN) DOM1: [ 3.845424] cacheinfo: Unable to detect cache hierarchy for CPU 0 (XEN) DOM1: [ 3.853286] libphy: Fixed MDIO Bus: probed (XEN) DOM1: [ 3.859834] vcan: Virtual CAN interface driver (XEN) DOM1: [ 3.865652] slcan: serial line CAN interface driver (XEN) DOM1: [ 3.871559] slcan: 10 dynamic interface channels. (XEN) DOM1: [ 3.877276] CAN device driver interface (XEN) DOM1: [ 3.883482] sdhci: Secure Digital Host Controller Interface driver (XEN) DOM1: [ 3.891021] sdhci: Copyright(c) Pierre Ossman (XEN) DOM1: [ 3.896389] sdhci-pltfm: SDHCI platform and OF driver helper (XEN) DOM1: [ 3.903298] Unhandled fault at 0xffffff800800d048 (XEN) DOM1: [ 3.909021] Mem abort info: (XEN) DOM1: [ 3.912863] ESR = 0x96000000 (XEN) DOM1: [ 3.917019] Exception class = DABT (current EL), IL = 32 bits (XEN) DOM1: [ 3.924115] SET = 0, FnV = 0 (XEN) DOM1: [ 3.928206] EA = 0, S1PTW = 0 (XEN) DOM1: [ 3.932457] Data abort info: (XEN) DOM1: [ 3.936514] ISV = 0, ISS = 0x00000000 (XEN) DOM1: [ 3.941398] CM = 0, WnR = 0 (XEN) DOM1: [ 3.945481] swapper pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) (XEN) DOM1: [ 3.953532] [ffffff800800d048] pgd=00000000bfffe803, pud=00000000bfffe803, pmd=00000000bfffd803, pte=00e80000402f0f07 (XEN) DOM1: [ 3.965278] Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP (XEN) DOM1: [ 3.973546] Modules linked in: (XEN) DOM1: [ 3.977709] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) (XEN) DOM1: [ 3.985525] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.59-rt24+g00334f2 #1 (XEN) DOM1: [ 3.993855] pstate: 60000005 (nZCv daif -PAN -UAO) (XEN) DOM1: [ 3.999755] pc : 0xffffff80083ac864 (XEN) DOM1: [ 4.004354] lr : 0xffffff80083ac810 (XEN) DOM1: [ 4.008955] sp : ffffff800800bba0 (XEN) DOM1: [ 4.013382] x29: ffffff800800bba0 x28: 0000000000000000 (XEN) DOM1: [ 4.019805] x27: ffffff800864f068 x26: ffffff80086ba000 (XEN) DOM1: [ 4.026228] x25: ffffffc031564980 x24: ffffff800856e0c0 (XEN) DOM1: [ 4.032651] x23: ffffffc03e8eec00 x22: ffffffc03e8eec10 (XEN) DOM1: [ 4.039074] x21: ffffffc03e8bf500 x20: ffffffc03e8bf800 (XEN) DOM1: [ 4.045497] x19: 0000000000000000 x18: ffffffffffffffff (XEN) DOM1: [ 4.051921] x17: 0000000000000000 x16: 0000000000000000 (XEN) DOM1: [ 4.058344] x15: ffffff8008678548 x14: ffffffffffffffff (XEN) DOM1: [ 4.064767] x13: 0000000000000018 x12: 0101010101010101 (XEN) DOM1: [ 4.071190] x11: 0000000000000020 x10: 0101010101010101 (XEN) DOM1: [ 4.077613] x9 : 0000000000000000 x8 : ffffffc031564c00 (XEN) DOM1: [ 4.084036] x7 : 0000000000000000 x6 : 000000000000003f (XEN) DOM1: [ 4.090459] x5 : 0000000000000002 x4 : ffffffc03e83b4c0 (XEN) DOM1: [ 4.096883] x3 : 0000000000000000 x2 : 0000000000000000 (XEN) DOM1: [ 4.103306] x1 : ffffffc03e8bf000 x0 : ffffff800800d048 (XEN) DOM1: [ 4.109729] Call trace: (XEN) DOM1: [ 4.113290] 0xffffff80083ac864 (XEN) DOM1: [ 4.117541] 0xffffff800832e3b8 (XEN) DOM1: [ 4.121795] 0xffffff800832c49c (XEN) DOM1: [ 4.126047] 0xffffff800832c6bc (XEN) DOM1: [ 4.130301] 0xffffff800832c808 (XEN) DOM1: [ 4.134554] 0xffffff800832a208 (XEN) DOM1: [ 4.138807] 0xffffff800832bd38 (XEN) DOM1: [ 4.143060] 0xffffff800832b5d8 (XEN) DOM1: [ 4.147314] 0xffffff800832d1f0 (XEN) DOM1: [ 4.151567] 0xffffff800832e318 (XEN) DOM1: [ 4.155820] 0xffffff800861d5f8 (XEN) DOM1: [ 4.160073] 0xffffff800808397c (XEN) DOM1: [ 4.164326] 0xffffff8008600db4 (XEN) DOM1: [ 4.168580] 0xffffff80085078c0 (XEN) DOM1: [ 4.172833] 0xffffff8008084c30 (XEN) DOM1: [ 4.177091] Code: b9000ea0 d5033e9f f9400ea0 91012000 (b900001f) [ 4.178150] F(XEN) DOM1: [ 4.184298] ---[ end trace 7dc5f6b878cccbfa ]--- reeing initrd me(XEN) DOM1: [ 4.191546] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b mory: 63060K (XEN) DOM1: [ 4.191546] [ 4.203888] w(XEN) DOM1: [ 4.205478] Kernel Offset: disabled orkingset: times(XEN) DOM1: [ 4.211462] CPU features: 0x0,6080200c tamp_bits=62 max(XEN) DOM1: [ 4.217710] Memory Limit: none _order=17 bucket(XEN) DOM1: [ 4.223267] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b _order=0 (XEN) DOM1: [ 4.223267] ]--- [ 4.235587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 4.245021] io scheduler noop registered [ 4.248811] io scheduler deadline registered [ 4.253187] io scheduler cfq registered (default) [ 4.258014] io scheduler mq-deadline registered [ 4.262524] io scheduler kyber registered [ 4.267119] s32g275-siul2-pinctrl 4009c240.siul2-pinctrl0: initialized s32 pinctrl driver [ 4.275720] s32g275-siul2-pinctrl 44010400.siul2-pinctrl1: initialized s32 pinctrl driver [ 4.295670] xen:xen_evtchn: Event-channel device installed [ 4.303222] 401c8000.serial: ttyLF0 at MMIO 0x401c8000 (irq = 27, base_baud = 7812500) is a FSL_LINFLEX [ 4.313495] 401cc000.serial: ttyLF1 at MMIO 0x401cc000 (irq = 28, base_baud = 7812500) is a FSL_LINFLEX [ 4.323305] 402bc000.serial: ttyLF2 at MMIO 0x402bc000 (irq = 57, base_baud = 7812500) is a FSL_LINFLEX [ 4.333325] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 4.339423] Invalid max_queues (4), will use default max: 1. [ 4.351272] libphy: Fixed MDIO Bus: probed [ 4.356305] vcan: Virtual CAN interface driver [ 4.360930] slcan: serial line CAN interface driver [ 4.365663] slcan: 10 dynamic interface channels. [ 4.370330] CAN device driver interface [ 4.375679] flexcan 401b4000.flexcan: device registered (reg_base=(____ptrval____), irq(s): [ 4.383914] flexcan 401b4000.flexcan: 23 [ 4.387934] flexcan 401b4000.flexcan: 24 [ 4.391955] flexcan 401b4000.flexcan: 25 [ 4.396027] flexcan 401b4000.flexcan: 26 [ 4.400174] flexcan 401b4000.flexcan: ) [ 4.405164] flexcan 402a8000.flexcan: device registered (reg_base=(____ptrval____), irq(s): [ 4.413779] flexcan 402a8000.flexcan: 49 [ 4.417537] flexcan 402a8000.flexcan: 50 [ 4.421629] flexcan 402a8000.flexcan: 51 [ 4.426014] flexcan 402a8000.flexcan: 52 [ 4.429774] flexcan 402a8000.flexcan: ) [ 4.434730] flexcan 402b2000.flexcan: device registered (reg_base=(____ptrval____), irq(s): [ 4.443318] flexcan 402b2000.flexcan: 53 [ 4.447079] flexcan 402b2000.flexcan: 54 [ 4.451172] flexcan 402b2000.flexcan: 55 [ 4.455566] flexcan 402b2000.flexcan: 56 [ 4.459323] flexcan 402b2000.flexcan: ) [ 4.464209] s32cc-dwmac 4033c000.ethernet: PTP uses main clock [ 4.470203] s32cc-dwmac 4033c000.ethernet: no reset control found [ 4.476073] s32cc-dwmac 4033c000.ethernet: phy mode set to RGMII [ 4.486580] s32cc-dwmac 4033c000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 4.493330] s32cc-dwmac 4033c000.ethernet: DWMAC4/5 [ 4.498665] s32cc-dwmac 4033c000.ethernet: DMA HW capability register supported [ 4.505729] s32cc-dwmac 4033c000.ethernet: RX Checksum Offload Engine supported [ 4.513295] s32cc-dwmac 4033c000.ethernet: TX Checksum insertion supported [ 4.520050] s32cc-dwmac 4033c000.ethernet: Wake-Up On Lan supported [ 4.526532] s32cc-dwmac 4033c000.ethernet: Enabled workarounds for s32g274a platform [ 4.534198] s32cc-dwmac 4033c000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 4.542139] s32cc-dwmac 4033c000.ethernet (unnamed net_device) (uninitialized): device MAC address ea:3c:1a:ef:c0:a4 [ 4.552712] s32cc-dwmac 4033c000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 4.560685] libphy: stmmac: probed [ 4.564271] mdio_bus stmmac-0: MDIO device at address 4 is missing. [ 4.571673] xen_netfront: Initialising Xen virtual ethernet driver [ 4.579390] sdhci: Secure Digital Host Controller Interface driver [ 4.585690] sdhci: Copyright(c) Pierre Ossman [ 4.589879] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.596354] NET: Registered protocol family 10 [ 4.605481] Segment Routing with IPv6 [ 4.608984] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.615595] NET: Registered protocol family 17 [ 4.619943] can: controller area network core (rev 20170425 abi 9) [ 4.626093] NET: Registered protocol family 29 [ 4.630612] can: raw protocol (rev 20170425) [ 4.634928] can: broadcast manager protocol (rev 20170425 t) [ 4.640638] can: netlink gateway (rev 20170425) max_hops=1 [ 4.650454] Freeing unused kernel memory: 448K [ 4.654919] Run /init as init process INIT: version 2.88 booting Starting udev [ 4.789342] udevd[612]: starting version 3.2.5 [ 4.794312] random: udevd: uninitialized urandom read (16 bytes read) [ 4.800822] random: udevd: uninitialized urandom read (16 bytes read) [ 4.807080] random: udevd: uninitialized urandom read (16 bytes read) [ 4.823798] udevd[613]: starting eudev-3.2.5 [ 5.086003] loading NXP PHY driver: [autonomous mode] [ 5.114493] sja1105pqrs: loading out-of-tree module taints kernel. [ 5.127910] sja1105pqrs spi5.0: Loading SJA1105P SPI driver [ 5.133614] sja1105pqrs spi5.0: Detected device id is invalid: ffffffff [ 5.139993] sja1105pqrs spi5.0: SJA1105P SPI Failed to read Device Id Thu Feb 6 16:32:51 UTC 2020 [ 6.229974] urandom_read: 2 callbacks suppressed [ 6.229984] random: dd: uninitialized urandom read (512 bytes read) INIT: Entering runlevel: 5 Configuring network interfaces... ifup: don't have all variables for eth0/inet Starting syslogd/klogd: done Starting random number generator daemonUnable to open file: /dev/tpm0 can't open any entropy source Maybe RNG device modules are not loaded . Starting /usr/sbin/xenstored.... Setting domain 0 name, domid and JSON config... Done setting up Dom0 Starting xenconsoled... Starting QEMU as disk backend for dom0 [ 7.705490] random: qemu-system-i38: uninitialized urandom read (16 bytes read) Starting domain watchdog daemon: xenwatchdogd startup