[ 443.316] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 443.316] X Protocol Version 11, Revision 0 [ 443.316] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo [ 443.316] Current Operating System: Linux NiTr0 4.0.5-gentoo #4 SMP Fri Aug 21 20:49:20 EEST 2015 x86_64 [ 443.316] Kernel command line: root=/dev/sda5 [ 443.316] Build Date: 19 August 2015 08:14:26PM [ 443.316] [ 443.316] Current version of pixman: 0.32.6 [ 443.316] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 443.316] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 443.316] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 27 19:02:40 2015 [ 443.337] (==) Using config file: "/etc/X11/xorg.conf" [ 443.337] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 443.361] (==) ServerLayout "X.org Configured" [ 443.361] (**) |-->Screen "Screen0" (0) [ 443.361] (**) | |-->Monitor "Monitor0" [ 443.361] (**) | |-->Device "Card0" [ 443.361] (**) |-->Input Device "Mouse0" [ 443.361] (**) |-->Input Device "Keyboard0" [ 443.361] (==) Automatically adding devices [ 443.361] (==) Automatically enabling devices [ 443.361] (==) Automatically adding GPU devices [ 443.411] (**) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 443.411] (**) ModulePath set to "/usr/lib64/xorg/modules" [ 443.411] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 443.411] (WW) Disabling Mouse0 [ 443.411] (WW) Disabling Keyboard0 [ 443.411] (II) Loader magic: 0x806c80 [ 443.411] (II) Module ABI versions: [ 443.411] X.Org ANSI C Emulation: 0.4 [ 443.411] X.Org Video Driver: 18.0 [ 443.411] X.Org XInput driver : 21.0 [ 443.411] X.Org Server Extension : 8.0 [ 443.414] (--) PCI:*(0:3:0:0) 102b:0522:8086:0101 rev 2, Mem @ 0xb0000000/16777216, 0xb1800000/16384, 0xb1000000/8388608, BIOS @ 0x????????/65536 [ 443.414] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 443.414] (II) LoadModule: "glx" [ 443.441] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 443.587] (II) Module glx: vendor="X.Org Foundation" [ 443.587] compiled for 1.16.4, module version = 1.0.0 [ 443.588] ABI class: X.Org Server Extension, version 8.0 [ 443.588] (==) AIGLX enabled [ 443.588] (II) LoadModule: "mga" [ 443.588] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so [ 443.598] (II) Module mga: vendor="X.Org Foundation" [ 443.598] compiled for 1.16.4, module version = 1.6.3 [ 443.598] Module class: X.Org Video Driver [ 443.598] ABI class: X.Org Video Driver, version 18.0 [ 443.598] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550 [ 443.598] (++) using VT number 7 [ 443.609] (II) Loading sub module "vgahw" [ 443.609] (II) LoadModule: "vgahw" [ 443.609] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [ 443.617] (II) Module vgahw: vendor="X.Org Foundation" [ 443.618] compiled for 1.16.4, module version = 0.1.0 [ 443.618] ABI class: X.Org Video Driver, version 18.0 [ 443.618] (--) MGA(0): Chipset: "mgag200 SE A PCI" [ 443.618] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips. If you don't intend to use video redirection enable with Option "HWCursor" "On" [ 443.618] xf86TokenToOptinfo: table is NULL [ 443.618] xf86TokenToOptinfo: table is NULL [ 443.618] (==) MGA(0): Using SW cursor [ 443.618] (--) MGA(0): Linear framebuffer at 0xB0000000 [ 443.618] (--) MGA(0): MMIO registers at 0xB1800000 [ 443.618] (--) MGA(0): Pseudo-DMA transfer window at 0xB1000000 [ 443.618] (II) MGA(0): MAPPED Framebuffer B0000000 400000 to 7FBC15C9F000. [ 443.618] (II) MGA(0): UNMAPPING framebuffer 0x7FBC15C9F000, 0x400000. [ 443.618] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FBC1509F000. [ 443.693] (II) MGA(0): UNMAPPING framebuffer 0x7FBC1509F000, 0x1000000. [ 443.693] (==) MGA(0): Depth 24, (--) framebuffer bpp 32 [ 443.858] (==) MGA(0): RGB weight 888 [ 443.858] (II) MGA(0): Disabling MTRR support. [ 443.858] (==) MGA(0): Using AGP 1x mode [ 443.858] (==) MGA(0): Using XAA acceleration [ 443.859] (--) MGA(0): Video BIOS info block at offset 0x07AE0 [ 443.859] (==) MGA(0): VideoRAM: 8128 kByte [ 443.859] (II) Loading sub module "ddc" [ 443.859] (II) LoadModule: "ddc" [ 443.859] (II) Module "ddc" already built-in [ 443.859] (II) Loading sub module "i2c" [ 443.859] (II) LoadModule: "i2c" [ 443.859] (II) Module "i2c" already built-in [ 443.859] (II) MGA(0): MAPPED Framebuffer B0000000 7f0000 to 7FBC158AF000. [ 443.859] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 444.220] (II) MGA(0): I2C bus "DDC P1" initialized. [ 444.220] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. [ 444.228] (--) MGA(0): No DDC signal [ 444.228] (II) Loading sub module "vbe" [ 444.228] (II) LoadModule: "vbe" [ 444.228] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 444.252] (II) Module vbe: vendor="X.Org Foundation" [ 444.252] compiled for 1.16.4, module version = 1.1.0 [ 444.252] ABI class: X.Org Video Driver, version 18.0 [ 444.252] (II) Loading sub module "int10" [ 444.252] (II) LoadModule: "int10" [ 444.253] (II) Loading /usr/lib64/xorg/modules/libint10.so [ 444.308] (II) Module int10: vendor="X.Org Foundation" [ 444.308] compiled for 1.16.4, module version = 1.0.0 [ 444.308] ABI class: X.Org Video Driver, version 18.0 [ 444.308] (II) MGA(0): initializing int10 [ 444.311] (II) MGA(0): Primary V_BIOS segment is: 0xc000 [ 444.311] (II) MGA(0): VESA BIOS detected [ 444.311] (II) MGA(0): VESA VBE Version 3.0 [ 444.311] (II) MGA(0): VESA VBE Total Mem: 8128 kB [ 444.311] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. [ 444.311] (II) MGA(0): VESA VBE OEM Software Rev: 3.8 [ 444.311] (II) MGA(0): VESA VBE OEM Vendor: Matrox [ 444.311] (II) MGA(0): VESA VBE OEM Product: MGA-G200 [ 444.311] (II) MGA(0): VESA VBE OEM Product Rev: 00 [ 444.386] (II) MGA(0): VESA VBE DDC supported [ 444.386] (II) MGA(0): VESA VBE DDC Level none [ 444.386] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. [ 444.460] (II) MGA(0): VESA VBE DDC read failed [ 444.731] (II) MGA(0): UNMAPPING framebuffer 0x7FBC158AF000, 0x7F0000. [ 444.731] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) [ 444.731] (==) MGA(0): Min pixel clock is 17 MHz [ 444.731] (--) MGA(0): Max pixel clock is 230 MHz [ 444.731] (II) MGA(0): Monitor0: Using hsync range of 31.50-48.00 kHz [ 444.731] (II) MGA(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz [ 444.731] (II) MGA(0): Clock range: 17.75 to 230.00 MHz [ 444.731] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) [ 444.731] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) [ 444.731] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 444.731] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 444.731] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 444.731] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 444.731] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range) [ 444.731] (II) MGA(0): Not using default mode "1024x768" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1024x768" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1152x864" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 444.732] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "832x624" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "416x312" (hsync out of range) [ 444.732] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [ 444.732] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 444.733] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [ 444.733] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 444.733] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 444.733] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 444.733] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 444.733] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 444.733] (II) MGA(0): Not using mode "1280x1024" (no mode of this name) [ 444.733] (--) MGA(0): Has SDRAM [ 444.733] (--) MGA(0): Virtual size is 1024x768 (pitch 1024) [ 444.733] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz [ 444.733] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd) [ 444.733] (**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz [ 444.733] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d) [ 444.733] (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz [ 444.733] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d) [ 444.733] (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [ 444.733] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 444.733] (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [ 444.733] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 444.733] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz [ 444.733] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) [ 444.733] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz [ 444.733] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) [ 444.733] (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz [ 444.733] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 444.733] (**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) [ 444.733] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 444.733] (**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) [ 444.733] (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d) [ 444.733] (**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) [ 444.733] (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d) [ 444.733] (**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) [ 444.733] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 444.733] (**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) [ 444.733] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 444.733] (==) MGA(0): DPI set to (96, 96) [ 444.733] (II) MGA(0): YDstOrg is set to 0 [ 444.733] (II) Loading sub module "fb" [ 444.733] (II) LoadModule: "fb" [ 444.733] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 444.755] (II) Module fb: vendor="X.Org Foundation" [ 444.755] compiled for 1.16.4, module version = 1.0.0 [ 444.755] ABI class: X.Org ANSI C Emulation, version 0.4 [ 444.755] (--) Depth 24 pixmap format is 32 bpp [ 444.755] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FBC13C85000. [ 444.755] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 445.285] (--) MGA(0): 64 DWORD fifo [ 445.319] (II) MGA(0): Clock == 65000 [ 445.319] (II) MGA(0): BitsPerPixel == 32 [ 445.319] (II) MGA(0): HiPriLvl == 03 [ 445.332] (==) MGA(0): Default visual is TrueColor [ 445.332] (WW) MGA(0): Not supported by hardware, not initializing the DRI [ 445.340] (II) MGA(0): Using -512 lines for offscreen memory. [ 445.340] (==) MGA(0): Backing store enabled [ 445.340] (==) MGA(0): Silken mouse enabled [ 445.341] (==) MGA(0): DPMS enabled [ 445.341] (WW) MGA(0): Direct rendering disabled [ 445.341] (WW) MGA(0): Option "MTRR" is not used [ 445.341] (==) RandR enabled [ 445.380] (II) AIGLX: Screen 0 is not DRI2 capable [ 445.380] (EE) AIGLX: reverting to software rendering [ 446.023] (II) AIGLX: Loaded and initialized swrast [ 446.023] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 447.681] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 447.681] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 447.681] (**) Power Button: Applying InputClass "system-keyboard" [ 447.681] (II) LoadModule: "evdev" [ 447.681] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 448.180] (II) Module evdev: vendor="X.Org Foundation" [ 448.180] compiled for 1.16.4, module version = 2.9.1 [ 448.180] Module class: X.Org XInput Driver [ 448.180] ABI class: X.Org XInput driver, version 21.0 [ 448.180] (II) Using input driver 'evdev' for 'Power Button' [ 448.180] (**) Power Button: always reports core events [ 448.180] (**) evdev: Power Button: Device: "/dev/input/event5" [ 448.180] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 448.180] (--) evdev: Power Button: Found keys [ 448.180] (II) evdev: Power Button: Configuring as keyboard [ 448.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 448.180] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 448.180] (**) Option "xkb_rules" "evdev" [ 448.180] (**) Option "xkb_model" "pc105" [ 448.180] (**) Option "xkb_layout" "us,ru,ua" [ 448.180] (**) Option "xkb_variant" ",winkeys,winkeys" [ 448.180] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 448.261] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 448.261] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 448.261] (**) Sleep Button: Applying InputClass "system-keyboard" [ 448.262] (II) Using input driver 'evdev' for 'Sleep Button' [ 448.262] (**) Sleep Button: always reports core events [ 448.262] (**) evdev: Sleep Button: Device: "/dev/input/event4" [ 448.262] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 448.262] (--) evdev: Sleep Button: Found keys [ 448.262] (II) evdev: Sleep Button: Configuring as keyboard [ 448.262] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4" [ 448.262] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 448.262] (**) Option "xkb_rules" "evdev" [ 448.262] (**) Option "xkb_model" "pc105" [ 448.262] (**) Option "xkb_layout" "us,ru,ua" [ 448.262] (**) Option "xkb_variant" ",winkeys,winkeys" [ 448.262] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 448.263] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event0) [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev keyboard catchall" [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "system-keyboard" [ 448.263] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [ 448.263] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [ 448.263] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event0" [ 448.263] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10 [ 448.263] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found keys [ 448.263] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as keyboard [ 448.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046B:FF10.0001/input/input0/event0" [ 448.263] (II) XINPUT: Adding extended input device "American Megatrends Inc. Virtual Keyboard and Mouse" (type: KEYBOARD, id 8) [ 448.263] (**) Option "xkb_rules" "evdev" [ 448.263] (**) Option "xkb_model" "pc105" [ 448.263] (**) Option "xkb_layout" "us,ru,ua" [ 448.263] (**) Option "xkb_variant" ",winkeys,winkeys" [ 448.263] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 448.264] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event1) [ 448.264] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev pointer catchall" [ 448.264] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [ 448.264] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [ 448.264] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event1" [ 448.321] (EE) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Unable to open evdev device "/dev/input/event1". [ 448.321] (EE) PreInit returned 2 for "American Megatrends Inc. Virtual Keyboard and Mouse" [ 448.321] (II) UnloadModule: "evdev" [ 448.321] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/mouse0) [ 448.321] (II) No input driver specified, ignoring this device. [ 448.321] (II) This device may have been added with another device file. [ 448.322] (II) config/udev: Adding input device Barcode Reader (/dev/input/event2) [ 448.322] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [ 448.322] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 448.322] (II) Using input driver 'evdev' for 'Barcode Reader ' [ 448.322] (**) Barcode Reader : always reports core events [ 448.322] (**) evdev: Barcode Reader : Device: "/dev/input/event2" [ 448.322] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [ 448.322] (--) evdev: Barcode Reader : Found keys [ 448.322] (II) evdev: Barcode Reader : Configuring as keyboard [ 448.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:13BA:0018.0003/input/input2/event2" [ 448.322] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 9) [ 448.322] (**) Option "xkb_rules" "evdev" [ 448.322] (**) Option "xkb_model" "pc105" [ 448.322] (**) Option "xkb_layout" "us,ru,ua" [ 448.322] (**) Option "xkb_variant" ",winkeys,winkeys" [ 448.322] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 448.323] (II) config/udev: Adding input device Barcode Reader (/dev/input/event3) [ 448.323] (**) Barcode Reader : Applying InputClass "evdev pointer catchall" [ 448.323] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [ 448.323] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 448.323] (II) Using input driver 'evdev' for 'Barcode Reader ' [ 448.323] (**) Barcode Reader : always reports core events [ 448.324] (**) evdev: Barcode Reader : Device: "/dev/input/event3" [ 448.324] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [ 448.324] (--) evdev: Barcode Reader : Found 9 mouse buttons [ 448.324] (--) evdev: Barcode Reader : Found scroll wheel(s) [ 448.324] (--) evdev: Barcode Reader : Found relative axes [ 448.324] (--) evdev: Barcode Reader : Found x and y relative axes [ 448.324] (--) evdev: Barcode Reader : Found absolute axes [ 448.324] (II) evdev: Barcode Reader : Forcing absolute x/y axes to exist. [ 448.324] (--) evdev: Barcode Reader : Found keys [ 448.324] (II) evdev: Barcode Reader : Configuring as mouse [ 448.324] (II) evdev: Barcode Reader : Configuring as keyboard [ 448.324] (II) evdev: Barcode Reader : Adding scrollwheel support [ 448.324] (**) evdev: Barcode Reader : YAxisMapping: buttons 4 and 5 [ 448.324] (**) evdev: Barcode Reader : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 448.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:13BA:0018.0004/input/input3/event3" [ 448.324] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 10) [ 448.324] (**) Option "xkb_rules" "evdev" [ 448.324] (**) Option "xkb_model" "pc105" [ 448.324] (**) Option "xkb_layout" "us,ru,ua" [ 448.324] (**) Option "xkb_variant" ",winkeys,winkeys" [ 448.324] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 448.324] (II) evdev: Barcode Reader : initialized for relative axes. [ 448.324] (WW) evdev: Barcode Reader : ignoring absolute axes. [ 448.325] (**) Barcode Reader : (accel) keeping acceleration scheme 1 [ 448.325] (**) Barcode Reader : (accel) acceleration profile 0 [ 448.325] (**) Barcode Reader : (accel) acceleration factor: 2.000 [ 448.325] (**) Barcode Reader : (accel) acceleration threshold: 4 [ 448.325] (II) config/udev: Adding input device Barcode Reader (/dev/input/mouse1) [ 448.325] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 448.325] (II) No input driver specified, ignoring this device. [ 448.325] (II) This device may have been added with another device file.