[ 0.000000] Linux version 5.15.12-artix1-1 (linux@artixlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 30 Dec 2021 11:24:09 +0000 [ 0.000000] Command line: root=/dev/sda2 initrd=\initramfs-linux.img resume=/dev/sda3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cc177fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc178000-0x00000000cc379fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cc37a000-0x00000000d694efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d694f000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xccde4018-0xccdf4057] usable ==> usable [ 0.000000] e820: update [mem 0xccde4018-0xccdf4057] usable ==> usable [ 0.000000] e820: update [mem 0xccdd3018-0xccde3657] usable ==> usable [ 0.000000] e820: update [mem 0xccdd3018-0xccde3657] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000cc177fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cc178000-0x00000000cc379fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cc37a000-0x00000000ccdd3017] usable [ 0.000000] reserve setup_data: [mem 0x00000000ccdd3018-0x00000000ccde3657] usable [ 0.000000] reserve setup_data: [mem 0x00000000ccde3658-0x00000000ccde4017] usable [ 0.000000] reserve setup_data: [mem 0x00000000ccde4018-0x00000000ccdf4057] usable [ 0.000000] reserve setup_data: [mem 0x00000000ccdf4058-0x00000000d694efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d694f000-0x00000000dae9efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021e5fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000021e600000-0x000000021e7fffff] reserved [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI 2.0=0xdaffe014 ACPI=0xdaffe000 SMBIOS=0xdae9e000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 23571A3/23571A3, BIOS G7ETB5WW (2.75 ) 06/10/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.970 MHz processor [ 0.000237] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000240] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000248] last_pfn = 0x21e600 max_arch_pfn = 0x400000000 [ 0.000399] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001306] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.019955] Secure boot disabled [ 0.019956] RAMDISK: [mem 0x7fa1a000-0x7fffffff] [ 0.019959] ACPI: Early table checksum verification disabled [ 0.019962] ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO) [ 0.019967] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.019974] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G7 00002750 PTL 00000002) [ 0.019980] ACPI: DSDT 0x00000000DAFE7000 01109F (v01 LENOVO TP-G7 00002750 INTL 20061109) [ 0.019984] ACPI: FACS 0x00000000DAF5A000 000040 [ 0.019987] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G7 00002750 PTL 00000001) [ 0.019991] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.019995] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.019998] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.020002] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.020005] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020009] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020013] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020016] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020020] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020023] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020027] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020030] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.020034] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020037] ACPI: SSDT 0x00000000DAFDB000 000BF3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.020041] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.020045] ACPI: DMAR 0x00000000DAFD9000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.020048] ACPI: UEFI 0x00000000DAFD8000 000292 (v01 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020052] ACPI: DBG2 0x00000000DAFD7000 0000E9 (v00 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020055] ACPI: BGRT 0x00000000DAFD6000 000038 (v00 LENOVO TP-G7 00002750 PTL 00000002) [ 0.020058] ACPI: Reserving FACP table memory at [mem 0xdafe5000-0xdafe510b] [ 0.020060] ACPI: Reserving DSDT table memory at [mem 0xdafe7000-0xdaff809e] [ 0.020061] ACPI: Reserving FACS table memory at [mem 0xdaf5a000-0xdaf5a03f] [ 0.020062] ACPI: Reserving SLIC table memory at [mem 0xdaffd000-0xdaffd175] [ 0.020064] ACPI: Reserving TCPA table memory at [mem 0xdaffc000-0xdaffc031] [ 0.020065] ACPI: Reserving SSDT table memory at [mem 0xdaffb000-0xdaffb407] [ 0.020066] ACPI: Reserving SSDT table memory at [mem 0xdaffa000-0xdaffa032] [ 0.020067] ACPI: Reserving SSDT table memory at [mem 0xdaff9000-0xdaff9796] [ 0.020068] ACPI: Reserving HPET table memory at [mem 0xdafe3000-0xdafe3037] [ 0.020069] ACPI: Reserving APIC table memory at [mem 0xdafe2000-0xdafe2097] [ 0.020070] ACPI: Reserving MCFG table memory at [mem 0xdafe1000-0xdafe103b] [ 0.020071] ACPI: Reserving ECDT table memory at [mem 0xdafe0000-0xdafe0051] [ 0.020072] ACPI: Reserving FPDT table memory at [mem 0xdafdf000-0xdafdf063] [ 0.020073] ACPI: Reserving ASF! table memory at [mem 0xdafe6000-0xdafe60a4] [ 0.020075] ACPI: Reserving UEFI table memory at [mem 0xdafde000-0xdafde03d] [ 0.020076] ACPI: Reserving UEFI table memory at [mem 0xdafdd000-0xdafdd041] [ 0.020077] ACPI: Reserving POAT table memory at [mem 0xdafdc000-0xdafdc054] [ 0.020078] ACPI: Reserving SSDT table memory at [mem 0xdafdb000-0xdafdbbf2] [ 0.020079] ACPI: Reserving SSDT table memory at [mem 0xdafda000-0xdafdaa82] [ 0.020080] ACPI: Reserving DMAR table memory at [mem 0xdafd9000-0xdafd90b7] [ 0.020081] ACPI: Reserving UEFI table memory at [mem 0xdafd8000-0xdafd8291] [ 0.020082] ACPI: Reserving DBG2 table memory at [mem 0xdafd7000-0xdafd70e8] [ 0.020084] ACPI: Reserving BGRT table memory at [mem 0xdafd6000-0xdafd6037] [ 0.020142] No NUMA configuration found [ 0.020143] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff] [ 0.020147] NODE_DATA(0) allocated [mem 0x21e5f9000-0x21e5fcfff] [ 0.020173] Zone ranges: [ 0.020174] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020177] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020178] Normal [mem 0x0000000100000000-0x000000021e5fffff] [ 0.020180] Device empty [ 0.020181] Movable zone start for each node [ 0.020182] Early memory node ranges [ 0.020183] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.020184] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.020185] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.020187] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.020188] node 0: [mem 0x0000000040005000-0x00000000cc177fff] [ 0.020189] node 0: [mem 0x00000000cc37a000-0x00000000d694efff] [ 0.020190] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.020191] node 0: [mem 0x0000000100000000-0x000000021e5fffff] [ 0.020193] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff] [ 0.020198] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020199] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020223] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.021887] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.025591] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.025875] On node 0, zone DMA32: 514 pages in unavailable ranges [ 0.026058] On node 0, zone DMA32: 18096 pages in unavailable ranges [ 0.033835] On node 0, zone Normal: 20480 pages in unavailable ranges [ 0.033909] On node 0, zone Normal: 6656 pages in unavailable ranges [ 0.033919] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.034081] ACPI: PM-Timer IO Port: 0x408 [ 0.034089] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.034091] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.034105] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.034109] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034111] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034115] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.034117] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.034127] e820: update [mem 0xd37c1000-0xd383cfff] usable ==> reserved [ 0.034138] TSC deadline timer available [ 0.034139] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.034164] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034167] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.034169] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000bffff] [ 0.034170] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.034172] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.034174] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.034176] PM: hibernation: Registered nosave memory: [mem 0xcc178000-0xcc379fff] [ 0.034178] PM: hibernation: Registered nosave memory: [mem 0xccdd3000-0xccdd3fff] [ 0.034180] PM: hibernation: Registered nosave memory: [mem 0xccde3000-0xccde3fff] [ 0.034181] PM: hibernation: Registered nosave memory: [mem 0xccde4000-0xccde4fff] [ 0.034183] PM: hibernation: Registered nosave memory: [mem 0xccdf4000-0xccdf4fff] [ 0.034186] PM: hibernation: Registered nosave memory: [mem 0xd37c1000-0xd383cfff] [ 0.034188] PM: hibernation: Registered nosave memory: [mem 0xd694f000-0xdae9efff] [ 0.034189] PM: hibernation: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff] [ 0.034190] PM: hibernation: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.034192] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.034193] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff] [ 0.034194] PM: hibernation: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.034195] PM: hibernation: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.034196] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.034196] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.034198] [mem 0xdfa00000-0xf80f7fff] available for PCI devices [ 0.034200] Booting paravirtualized kernel on bare hardware [ 0.034202] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.039550] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.039819] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.039828] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.039831] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.039862] Built 1 zonelists, mobility grouping on. Total pages: 2018591 [ 0.039864] Policy zone: Normal [ 0.039865] Kernel command line: root=/dev/sda2 initrd=\initramfs-linux.img resume=/dev/sda3 [ 0.040301] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.040504] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.040702] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off [ 0.070565] Memory: 7872404K/8203172K available (14344K kernel code, 2071K rwdata, 10792K rodata, 1864K init, 3836K bss, 330508K reserved, 0K cma-reserved) [ 0.070573] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0 [ 0.070723] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.070735] Kernel/User page tables isolation: enabled [ 0.070753] ftrace: allocating 44301 entries in 174 pages [ 0.086834] ftrace: allocated 174 pages with 5 groups [ 0.086958] rcu: Preemptible hierarchical RCU implementation. [ 0.086960] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.086960] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.086962] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.086963] Trampoline variant of Tasks RCU enabled. [ 0.086964] Rude variant of Tasks RCU enabled. [ 0.086964] Tracing variant of Tasks RCU enabled. [ 0.086965] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.086966] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.091785] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.092091] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.092145] Console: colour dummy device 80x25 [ 0.092164] printk: console [tty0] enabled [ 0.092187] ACPI: Core revision 20210730 [ 0.092363] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.092381] APIC: Switch to symmetric I/O mode setup [ 0.092383] DMAR: Host address width 36 [ 0.092384] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.092390] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.092392] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.092395] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.092397] DMAR: RMRR base: 0x000000da3ba000 end: 0x000000da3d0fff [ 0.092399] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.092401] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.092403] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.092404] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.092932] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.092936] x2apic enabled [ 0.092945] Switched APIC routing to cluster x2apic. [ 0.093400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.109052] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563fba2b39, max_idle_ns: 440795251797 ns [ 0.109059] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.10 BogoMIPS (lpj=8646566) [ 0.109063] pid_max: default: 32768 minimum: 301 [ 0.114552] LSM: Security Framework initializing [ 0.114566] landlock: Up and running. [ 0.114567] Yama: becoming mindful. [ 0.114576] LSM support for eBPF active [ 0.114599] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.114613] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.114880] CPU0: Thermal monitoring enabled (TM1) [ 0.114900] process: using mwait in idle threads [ 0.114903] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.114904] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.114910] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.114912] Spectre V2 : Mitigation: Full generic retpoline [ 0.114912] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.114913] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.114914] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.114915] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.114917] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.114920] SRBDS: Vulnerable: No microcode [ 0.114921] MDS: Mitigation: Clear CPU buffers [ 0.118180] Freeing SMP alternatives memory: 36K [ 0.119146] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1220 [ 0.119158] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.119345] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.119354] ... version: 3 [ 0.119355] ... bit width: 48 [ 0.119356] ... generic registers: 4 [ 0.119356] ... value mask: 0000ffffffffffff [ 0.119357] ... max period: 00007fffffffffff [ 0.119358] ... fixed-purpose events: 3 [ 0.119359] ... event mask: 000000070000000f [ 0.119503] rcu: Hierarchical SRCU implementation. [ 0.120337] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.120425] smp: Bringing up secondary CPUs ... [ 0.120565] x86: Booting SMP configuration: [ 0.120567] .... node #0, CPUs: #1 [ 0.122506] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.122579] #2 #3 [ 0.125785] smp: Brought up 1 node, 4 CPUs [ 0.125785] smpboot: Max logical packages: 2 [ 0.125785] smpboot: Total of 4 processors activated (20760.41 BogoMIPS) [ 0.127029] devtmpfs: initialized [ 0.127029] x86/mm: Memory block size: 128MB [ 0.127029] ACPI: PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.127029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.127029] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.127029] pinctrl core: initialized pinctrl subsystem [ 0.127029] PM: RTC time: 19:03:23, date: 2022-01-01 [ 0.127029] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.127029] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.127029] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.127029] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.127029] audit: initializing netlink subsys (disabled) [ 0.127029] audit: type=2000 audit(1641063803.033:1): state=initialized audit_enabled=0 res=1 [ 0.127029] thermal_sys: Registered thermal governor 'fair_share' [ 0.127029] thermal_sys: Registered thermal governor 'bang_bang' [ 0.127029] thermal_sys: Registered thermal governor 'step_wise' [ 0.127029] thermal_sys: Registered thermal governor 'user_space' [ 0.127029] thermal_sys: Registered thermal governor 'power_allocator' [ 0.129073] cpuidle: using governor ladder [ 0.129078] cpuidle: using governor menu [ 0.129124] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.129126] ACPI: bus type PCI registered [ 0.129127] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.129326] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.129333] PCI: not using MMCONFIG [ 0.129337] PCI: Using configuration type 1 for base access [ 0.129359] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.129551] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.130294] Kprobes globally optimized [ 0.130299] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB [ 0.130299] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.130299] ACPI: Added _OSI(Module Device) [ 0.130299] ACPI: Added _OSI(Processor Device) [ 0.130299] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.130299] ACPI: Added _OSI(Processor Aggregator Device) [ 0.130299] ACPI: Added _OSI(Linux-Dell-Video) [ 0.130299] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.130299] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.148289] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.149016] ACPI: EC: EC started [ 0.149017] ACPI: EC: interrupt blocked [ 0.149791] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.149794] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.150097] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.154563] ACPI: Dynamic OEM Table Load: [ 0.154573] ACPI: SSDT 0xFFFF90F200DDD000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.155624] ACPI: Dynamic OEM Table Load: [ 0.155632] ACPI: SSDT 0xFFFF90F2002FE800 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.156438] ACPI: Dynamic OEM Table Load: [ 0.156444] ACPI: SSDT 0xFFFF90F200250E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.158062] ACPI: Interpreter enabled [ 0.158083] ACPI: PM: (supports S0 S3 S4 S5) [ 0.158085] ACPI: Using IOAPIC for interrupt routing [ 0.158110] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.158761] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.158771] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.159170] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.162780] ACPI: PM: Power Resource [PUBS] [ 0.163179] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.164497] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.166704] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.166706] ACPI: PCI: Interrupt link LNKA disabled [ 0.166821] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.166823] ACPI: PCI: Interrupt link LNKB disabled [ 0.166935] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.166936] ACPI: PCI: Interrupt link LNKC disabled [ 0.167044] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.167046] ACPI: PCI: Interrupt link LNKD disabled [ 0.167155] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.167156] ACPI: PCI: Interrupt link LNKE disabled [ 0.167268] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.167270] ACPI: PCI: Interrupt link LNKF disabled [ 0.167380] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.167381] ACPI: PCI: Interrupt link LNKG disabled [ 0.167490] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.167492] ACPI: PCI: Interrupt link LNKH disabled [ 0.167601] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.167607] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.167821] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR DPC] [ 0.167920] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.167923] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.167925] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.167926] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT) [ 0.168181] PCI host bridge to bus 0000:00 [ 0.168183] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.168185] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.168187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.168188] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.168190] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.168191] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.168193] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.168194] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.168196] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.168197] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.168199] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.168200] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.168202] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.168203] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.168205] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.168206] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window] [ 0.168207] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.168209] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.168254] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.168413] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.168423] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.168430] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.168435] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.168447] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.168610] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.168630] pci 0000:00:14.0: reg 0x10: [mem 0xf1520000-0xf152ffff 64bit] [ 0.168703] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.168819] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.168837] pci 0000:00:16.0: reg 0x10: [mem 0xf1535000-0xf153500f 64bit] [ 0.168902] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.169067] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.169085] pci 0000:00:19.0: reg 0x10: [mem 0xf1500000-0xf151ffff] [ 0.169093] pci 0000:00:19.0: reg 0x14: [mem 0xf153b000-0xf153bfff] [ 0.169102] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 0.169165] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.169311] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.169328] pci 0000:00:1a.0: reg 0x10: [mem 0xf153a000-0xf153a3ff] [ 0.169412] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.169560] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.169578] pci 0000:00:1b.0: reg 0x10: [mem 0xf1530000-0xf1533fff 64bit] [ 0.169658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.169821] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.169974] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.170157] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.170310] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.170486] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.170502] pci 0000:00:1d.0: reg 0x10: [mem 0xf1539000-0xf15393ff] [ 0.170589] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.170739] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.170978] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.170991] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 0.170999] pci 0000:00:1f.2: reg 0x14: [io 0x50b4-0x50b7] [ 0.171007] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 0.171015] pci 0000:00:1f.2: reg 0x1c: [io 0x50b0-0x50b3] [ 0.171023] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.171032] pci 0000:00:1f.2: reg 0x24: [mem 0xf1538000-0xf15387ff] [ 0.171073] pci 0000:00:1f.2: PME# supported from D3hot [ 0.171213] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.171231] pci 0000:00:1f.3: reg 0x10: [mem 0xf1534000-0xf15340ff 64bit] [ 0.171251] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.171399] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.171405] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.171410] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.171418] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.171672] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.171851] pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit] [ 0.172719] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.173276] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.173285] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.174791] ACPI: EC: interrupt unblocked [ 0.174793] ACPI: EC: event unblocked [ 0.174798] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.174799] ACPI: EC: GPE=0x11 [ 0.174801] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete [ 0.174803] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events [ 0.174868] iommu: Default domain type: Translated [ 0.174869] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.174885] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.174885] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.174885] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.174885] vgaarb: loaded [ 0.174885] SCSI subsystem initialized [ 0.174885] libata version 3.00 loaded. [ 0.174885] ACPI: bus type USB registered [ 0.174885] usbcore: registered new interface driver usbfs [ 0.174885] usbcore: registered new interface driver hub [ 0.174885] usbcore: registered new device driver usb [ 0.174885] pps_core: LinuxPPS API ver. 1 registered [ 0.174885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.174885] PTP clock support registered [ 0.174885] EDAC MC: Ver: 3.0.0 [ 0.174885] Registered efivars operations [ 0.174885] NetLabel: Initializing [ 0.174885] NetLabel: domain hash size = 128 [ 0.174885] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.174885] NetLabel: unlabeled traffic allowed by default [ 0.174885] PCI: Using ACPI for IRQ routing [ 0.177170] PCI: pci_cache_line_size set to 64 bytes [ 0.177268] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.177271] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.177272] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.177273] e820: reserve RAM buffer [mem 0xcc178000-0xcfffffff] [ 0.177275] e820: reserve RAM buffer [mem 0xccdd3018-0xcfffffff] [ 0.177276] e820: reserve RAM buffer [mem 0xccde4018-0xcfffffff] [ 0.177277] e820: reserve RAM buffer [mem 0xd37c1000-0xd3ffffff] [ 0.177278] e820: reserve RAM buffer [mem 0xd694f000-0xd7ffffff] [ 0.177280] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.177281] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff] [ 0.177287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.177287] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.179114] clocksource: Switched to clocksource tsc-early [ 0.188280] VFS: Disk quotas dquot_6.6.0 [ 0.188296] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.188377] pnp: PnP ACPI init [ 0.188969] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.188974] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.188976] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.188978] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.189166] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.189185] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.189187] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.189189] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.189191] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.189192] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.189195] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.189198] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved [ 0.189200] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.189203] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.189205] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.189207] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.189209] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.189212] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.189912] pnp: PnP ACPI: found 5 devices [ 0.195791] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.195852] NET: Registered PF_INET protocol family [ 0.195937] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.197170] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.197213] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.197356] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.197437] TCP: Hash tables configured (established 65536 bind 65536) [ 0.197500] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.197545] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.197569] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.197621] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.197628] NET: Registered PF_XDP protocol family [ 0.197638] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.197647] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.197655] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff] [ 0.197660] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.197668] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.197675] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff] [ 0.197688] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.197690] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.197692] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.197693] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.197695] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.197696] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.197698] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.197700] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.197701] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.197703] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.197704] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.197706] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.197707] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.197709] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.197710] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.197712] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfebfffff window] [ 0.197713] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window] [ 0.197715] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.197717] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff] [ 0.197718] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.197720] pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff] [ 0.197833] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.198344] PCI: CLS 64 bytes, default 64 [ 0.198382] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.198384] software IO TLB: mapped [mem 0x00000000ceb0e000-0x00000000d2b0e000] (64MB) [ 0.198413] Trying to unpack rootfs image as initramfs... [ 0.206293] Initialise system trusted keyrings [ 0.206306] Key type blacklist registered [ 0.206358] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 0.207619] zbud: loaded [ 0.219250] Key type asymmetric registered [ 0.219255] Asymmetric key parser 'x509' registered [ 0.219287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.219329] io scheduler mq-deadline registered [ 0.219331] io scheduler kyber registered [ 0.219371] io scheduler bfq registered [ 0.219891] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.220515] ACPI: AC: AC Adapter [AC] (on-line) [ 0.220566] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.222450] ACPI: button: Lid Switch [LID] [ 0.222511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.225775] ACPI: button: Sleep Button [SLPB] [ 0.225844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.229112] ACPI: button: Power Button [PWRF] [ 0.231103] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.231107] ACPI: thermal: Thermal Zone [THM0] (34 C) [ 0.231335] ACPI: battery: Slot [BAT0] (battery absent) [ 0.231361] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.233899] Non-volatile memory driver v1.3 [ 0.233902] Linux agpgart interface v0.103 [ 0.233904] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.234490] ahci 0000:00:1f.2: version 3.0 [ 0.234709] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.245674] Freeing initrd memory: 6040K [ 0.245763] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.245767] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst [ 0.266461] scsi host0: ahci [ 0.266678] scsi host1: ahci [ 0.266842] scsi host2: ahci [ 0.266949] scsi host3: ahci [ 0.267035] scsi host4: ahci [ 0.267120] scsi host5: ahci [ 0.267155] ata1: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538100 irq 26 [ 0.267160] ata2: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538180 irq 26 [ 0.267161] ata3: DUMMY [ 0.267162] ata4: DUMMY [ 0.267164] ata5: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538300 irq 26 [ 0.267166] ata6: DUMMY [ 0.267221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.267232] ehci-pci: EHCI PCI platform driver [ 0.267391] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.267398] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.267413] ehci-pci 0000:00:1a.0: debug port 2 [ 0.271339] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf153a000 [ 0.282426] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.282505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.282508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.282510] usb usb1: Product: EHCI Host Controller [ 0.282511] usb usb1: Manufacturer: Linux 5.15.12-artix1-1 ehci_hcd [ 0.282513] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.282638] hub 1-0:1.0: USB hub found [ 0.282646] hub 1-0:1.0: 3 ports detected [ 0.282881] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.282886] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.282900] ehci-pci 0000:00:1d.0: debug port 2 [ 0.286808] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1539000 [ 0.302434] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.302515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.302518] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.302520] usb usb2: Product: EHCI Host Controller [ 0.302521] usb usb2: Manufacturer: Linux 5.15.12-artix1-1 ehci_hcd [ 0.302522] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.302625] hub 2-0:1.0: USB hub found [ 0.302632] hub 2-0:1.0: 3 ports detected [ 0.302759] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.302763] ohci-pci: OHCI PCI platform driver [ 0.302771] uhci_hcd: USB Universal Host Controller Interface driver [ 0.302803] usbcore: registered new interface driver usbserial_generic [ 0.302808] usbserial: USB Serial support registered for generic [ 0.302914] rtc_cmos 00:02: RTC can wake from S4 [ 0.303147] rtc_cmos 00:02: registered as rtc0 [ 0.303185] rtc_cmos 00:02: setting system clock to 2022-01-01T19:03:23 UTC (1641063803) [ 0.303200] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.303322] intel_pstate: Intel P-state driver initializing [ 0.303643] ledtrig-cpu: registered to indicate activity on CPUs [ 0.303836] efifb: probing for efifb [ 0.303844] efifb: framebuffer at 0xe0000000, using 4128k, total 4128k [ 0.303845] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.303846] efifb: scrolling: redraw [ 0.303847] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.303881] fbcon: Deferring console take-over [ 0.303882] fb0: EFI VGA frame buffer device [ 0.303895] hid: raw HID events driver (C) Jiri Kosina [ 0.303949] drop_monitor: Initializing network drop monitor service [ 0.304006] Initializing XFRM netlink socket [ 0.304096] NET: Registered PF_INET6 protocol family [ 0.308580] Segment Routing with IPv6 [ 0.308583] RPL Segment Routing with IPv6 [ 0.308594] In-situ OAM (IOAM) with IPv6 [ 0.308620] NET: Registered PF_PACKET protocol family [ 0.308828] microcode: sig=0x306a9, pf=0x10, revision=0x21 [ 0.308840] microcode: Microcode Update Driver: v2.2. [ 0.308846] IPI shorthand broadcast: enabled [ 0.308854] sched_clock: Marking stable (308366746, 389359)->(328167335, -19411230) [ 0.309004] registered taskstats version 1 [ 0.309076] Loading compiled-in X.509 certificates [ 0.312290] Loaded X.509 cert 'Build time autogenerated kernel key: d2596b2df71383724b213853626b855cd2934c1c' [ 0.312525] zswap: loaded using pool lz4/z3fold [ 0.312714] Key type ._fscrypt registered [ 0.312715] Key type .fscrypt registered [ 0.312716] Key type fscrypt-provisioning registered [ 0.312965] PM: Magic number: 6:571:90 [ 0.312993] edac: hash matches [ 0.313112] RAS: Correctable Errors collector initialized. [ 0.532428] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.552423] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.582431] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.593821] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.593834] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.593840] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.603460] ata1.00: ATA-9: INTEL SSDSC2BW180A3L, LF1i, max UDMA/133 [ 0.603826] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.613849] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.613861] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.613867] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.623861] ata1.00: configured for UDMA/133 [ 0.624417] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW18 LF1i PQ: 0 ANSI: 5 [ 0.624661] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/168 GiB) [ 0.624681] sd 0:0:0:0: [sda] Write Protect is off [ 0.624683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.624694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.644255] sda: sda1 sda2 sda3 [ 0.662518] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.679813] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.679817] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.680223] hub 1-1:1.0: USB hub found [ 0.680371] hub 1-1:1.0: 6 ports detected [ 0.699447] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.699457] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.699775] hub 2-1:1.0: USB hub found [ 0.699954] hub 2-1:1.0: 8 ports detected [ 0.939099] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.941922] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 0.942135] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 0.942142] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.943106] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, SB01, max UDMA/133 [ 0.945646] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 0.945859] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 0.945871] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.946860] ata2.00: configured for UDMA/133 [ 0.962423] usb 1-1.6: new high-speed USB device number 3 using ehci-pci [ 0.963666] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 SB01 PQ: 0 ANSI: 5 [ 1.066472] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.63 [ 1.066482] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.066486] usb 1-1.6: Product: Integrated Camera [ 1.066489] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 1.212431] tsc: Refined TSC clocksource calibration: 2594.109 MHz [ 1.212447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647f0d2d3, max_idle_ns: 440795228342 ns [ 1.212495] clocksource: Switched to clocksource tsc [ 1.309087] ata5: SATA link down (SStatus 0 SControl 300) [ 1.311071] PM: Image not found (code -22) [ 1.313030] Freeing unused decrypted memory: 2036K [ 1.313416] Freeing unused kernel image (initmem) memory: 1864K [ 1.313472] Write protecting the kernel read-only data: 28672k [ 1.314059] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.314415] Freeing unused kernel image (rodata/data gap) memory: 1496K [ 1.366644] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.366648] rodata_test: all tests were successful [ 1.366650] x86/mm: Checking user space page tables [ 1.408494] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.408509] Run /init as init process [ 1.408511] with arguments: [ 1.408512] /init [ 1.408512] with environment: [ 1.408513] HOME=/ [ 1.408514] TERM=linux [ 1.464758] fbcon: Taking over console [ 1.464893] Console: switching to colour frame buffer device 170x48 [ 1.566157] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.566168] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.567246] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 1.567448] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.567452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.567454] usb usb3: Product: xHCI Host Controller [ 1.567457] usb usb3: Manufacturer: Linux 5.15.12-artix1-1 xhci-hcd [ 1.567458] usb usb3: SerialNumber: 0000:00:14.0 [ 1.567698] hub 3-0:1.0: USB hub found [ 1.567717] hub 3-0:1.0: 4 ports detected [ 1.576726] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.576732] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.576736] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.576781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.576784] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.576785] usb usb4: Product: xHCI Host Controller [ 1.576787] usb usb4: Manufacturer: Linux 5.15.12-artix1-1 xhci-hcd [ 1.576788] usb usb4: SerialNumber: 0000:00:14.0 [ 1.577506] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.578865] hub 4-0:1.0: USB hub found [ 1.578883] hub 4-0:1.0: 4 ports detected [ 1.579174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.579223] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.598273] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.598279] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.604903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.623201] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.705824] random: fast init done [ 1.829097] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.970999] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00 [ 1.971004] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.971006] usb 3-4: Product: H5321 gw [ 1.971007] usb 3-4: Manufacturer: Lenovo [ 1.971008] usb 3-4: SerialNumber: D91EC842BC2235M0 [ 1.983778] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 2.149957] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 2.149974] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) [ 2.167917] random: chronyd: uninitialized urandom read (4096 bytes read) [ 2.442549] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.443018] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.499825] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [ 2.499831] cdc_wdm 3-4:1.5: Unknown control protocol [ 2.499910] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device [ 2.499913] cdc_wdm 3-4:1.8: Unknown control protocol [ 2.499962] usbcore: registered new interface driver cdc_wdm [ 2.526039] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20210730/utaddress-204) [ 2.526050] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 2.526057] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210730/utaddress-204) [ 2.526062] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 2.526063] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210730/utaddress-204) [ 2.526068] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 2.526070] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20210730/utaddress-204) [ 2.526074] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 2.526075] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.527657] mc: Linux media interface: v0.10 [ 2.529610] e1000e: Intel(R) PRO/1000 Network Driver [ 2.529613] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.529836] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.557416] usbcore: registered new interface driver cdc_ether [ 2.561309] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [ 2.561556] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [ 2.565791] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 2.565834] usbcore: registered new interface driver cdc_acm [ 2.565837] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.567709] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.567768] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.572836] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 2.573838] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.574235] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.579849] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.580670] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.580676] cfg80211: failed to load regulatory.db [ 2.591634] videodev: Linux video capture interface: v2.00 [ 2.602449] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 2.609032] usbcore: registered new interface driver cdc_ncm [ 2.702549] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.734382] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 2.734386] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.734387] thinkpad_acpi: ThinkPad BIOS G7ETB5WW (2.75 ), EC G7HT39WW [ 2.734389] thinkpad_acpi: Lenovo ThinkPad T430s, model 23571A3 [ 2.735347] iTCO_vendor_support: vendor-support=0 [ 2.737475] Intel(R) Wireless WiFi driver for Linux [ 2.737674] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.747678] thinkpad_acpi: radio switch found; radios are enabled [ 2.747853] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.747855] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.749170] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 2.749524] checking generic (e0000000 408000) vs hw (f0000000 400000) [ 2.749528] checking generic (e0000000 408000) vs hw (e0000000 10000000) [ 2.749530] fb0: switching to i915 from EFI VGA [ 2.750332] Console: switching to colour dummy device 80x25 [ 2.750373] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.755034] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 6000g2a-6.ucode op_mode iwldvm [ 2.756722] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 2.762258] cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device [ 2.769668] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 66:bf:27:a3:40:51 [ 2.772521] usbcore: registered new interface driver cdc_mbim [ 2.773031] at24 0-0050: supply vcc not found, using dummy regulator [ 2.810992] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 2.810997] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 2.810999] RAPL PMU: hw unit of domain package 2^-16 Joules [ 2.811000] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 2.814385] at24 0-0050: 256 byte spd EEPROM, read-only [ 2.829518] ACPI: battery: new extension: ThinkPad Battery Extension [ 2.832929] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 2.833031] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 2.839599] at24 0-0051: supply vcc not found, using dummy regulator [ 2.842507] at24 0-0051: 256 byte spd EEPROM, read-only [ 2.853216] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 2.858339] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:85:d9:73 [ 2.859236] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.859425] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 2.876193] cryptd: max_cpu_qlen set to 1000 [ 2.876853] usb 1-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2db) [ 2.879166] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.879596] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 2.879599] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 2.879600] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 2.879601] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 2.883987] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8 [ 2.884087] usbcore: registered new interface driver uvcvideo [ 2.884420] ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.884652] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 2.916178] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.923413] AVX version of gcm_enc/dec engaged. [ 2.923465] AES CTR mode by8 optimization enabled [ 3.041997] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.042006] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.042009] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 3.042013] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.042015] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.042017] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 3.042020] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 3.042022] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 3.076091] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.090499] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 3.109115] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 3.109466] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 3.109560] fbcon: i915drmfb (fb0) is primary device [ 3.110023] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.110122] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.110195] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 3.110266] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 3.110329] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 3.240102] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] [ 3.241937] intel_rapl_common: Found RAPL domain package [ 3.241939] intel_rapl_common: Found RAPL domain core [ 3.241940] intel_rapl_common: Found RAPL domain uncore [ 3.241944] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 3.299376] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 [ 3.299384] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.336718] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.380086] mousedev: PS/2 mouse device common for all mice [ 3.386013] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 3.967287] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.981461] Console: switching to colour frame buffer device 170x48 [ 4.003059] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.138473] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 4.146777] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. [ 4.162272] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17 [ 4.248079] Adding 4172800k swap on /dev/sda3. Priority:-2 extents:1 across:4172800k SSFS [ 4.256700] urandom_read: 3 callbacks suppressed [ 4.256703] random: dd: uninitialized urandom read (4096 bytes read) [ 5.302380] random: crng init done [ 5.351372] wlan0: authenticate with b8:d9:4d:d5:53:7e [ 5.354467] wlan0: send auth to b8:d9:4d:d5:53:7e (try 1/3) [ 5.424688] wlan0: authenticated [ 5.425725] wlan0: associate with b8:d9:4d:d5:53:7e (try 1/3) [ 5.428504] wlan0: RX AssocResp from b8:d9:4d:d5:53:7e (capab=0x511 status=0 aid=54) [ 5.432826] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 5.445561] wlan0: associated [ 5.552739] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:d9:4d:d5:53:7e [ 5.599301] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6.338564] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 6.338644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.373439] 8021q: 802.1Q VLAN Support v1.8 [ 8.187415] elogind-daemon[915]: New seat seat0. [ 8.189077] elogind-daemon[915]: Watching system buttons on /dev/input/event2 (Power Button) [ 8.189603] elogind-daemon[915]: Watching system buttons on /dev/input/event0 (Lid Switch) [ 8.189668] elogind-daemon[915]: Watching system buttons on /dev/input/event1 (Sleep Button) [ 8.190325] elogind-daemon[915]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard) [ 8.190406] elogind-daemon[915]: Watching system buttons on /dev/input/event5 (ThinkPad Extra Buttons) [ 8.192100] elogind-daemon[915]: New session 1 of user s. [ 33.835346] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 33.835359] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 33.835716] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 33.835735] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 33.841648] elogind-daemon[915]: Lid closed. [ 33.845734] elogind-daemon[915]: Suspending... [ 33.849233] elogind-daemon[915]: Suspending system... [ 33.849254] PM: suspend entry (deep) [ 33.857996] Filesystems sync: 0.008 seconds [ 33.858430] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 33.859920] OOM killer disabled. [ 33.859921] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 33.861064] printk: Suspending console(s) (use no_console_suspend to debug) [ 33.987738] wlan0: deauthenticating from b8:d9:4d:d5:53:7e by local choice (Reason: 3=DEAUTH_LEAVING) [ 34.030434] e1000e: EEE TX LPI TIMER: 00000011 [ 34.048931] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 34.050736] sd 0:0:0:0: [sda] Stopping disk [ 34.289428] ACPI: EC: interrupt blocked [ 34.322369] ACPI: PM: Preparing to enter system sleep state S3 [ 34.325415] ACPI: EC: event blocked [ 34.325416] ACPI: EC: EC stopped [ 34.325417] ACPI: PM: Saving platform NVS memory [ 34.325428] Disabling non-boot CPUs ... [ 34.326884] smpboot: CPU 1 is now offline [ 34.328584] smpboot: CPU 2 is now offline [ 34.330279] smpboot: CPU 3 is now offline [ 34.332271] ACPI: PM: Low-level resume complete [ 34.332297] ACPI: EC: EC started [ 34.332297] ACPI: PM: Restoring platform NVS memory [ 34.332668] Enabling non-boot CPUs ... [ 34.332722] x86: Booting SMP configuration: [ 34.332723] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 34.335578] CPU1 is up [ 34.335615] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 34.338397] CPU2 is up [ 34.338428] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 34.341241] CPU3 is up [ 34.342528] ACPI: PM: Waking up from system sleep state S3 [ 34.349535] ACPI: EC: interrupt unblocked [ 34.381737] ACPI: EC: event unblocked [ 34.387033] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 34.391245] sd 0:0:0:0: [sda] Starting disk [ 34.401583] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 34.643815] usb 3-4: reset high-speed USB device number 2 using xhci_hcd [ 34.650058] usb 1-1.6: reset high-speed USB device number 3 using ehci-pci [ 34.710536] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 34.713527] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 34.715534] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 34.716520] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 34.716527] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 34.721827] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 34.722811] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 34.722817] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 34.723721] ata5: SATA link down (SStatus 0 SControl 300) [ 34.724633] ata2.00: configured for UDMA/133 [ 34.754261] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 34.786885] usb 3-4: device firmware changed [ 35.142319] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] [ 35.246028] OOM killer enabled. [ 35.246031] Restarting tasks ... [ 35.246035] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking [ 35.246119] usb 3-4: USB disconnect, device number 2 [ 35.247610] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! [ 35.250134] done. [ 35.251504] PM: suspend exit [ 35.251529] elogind-daemon[915]: System resumed. [ 35.252988] elogind-daemon[915]: Lid opened. [ 35.267991] cdc_mbim 3-4:1.6 wwan0: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM [ 35.293630] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 35.293639] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 35.293644] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 35.313765] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 35.313794] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 35.313800] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 35.323640] ata1.00: configured for UDMA/133 [ 35.406664] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 35.551039] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1927, bcdDevice= 1.00 [ 35.551062] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 35.551065] usb 3-4: Product: H5321 gw [ 35.551068] usb 3-4: Manufacturer: Lenovo [ 35.551070] usb 3-4: SerialNumber: D91EC842BC223580 [ 35.552829] usb 3-4: USB disconnect, device number 3 [ 35.571338] usbcore: registered new interface driver usbhid [ 35.571348] usbhid: USB HID core driver [ 36.773316] usb 3-4: new high-speed USB device number 4 using xhci_hcd [ 36.916209] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00 [ 36.916222] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 36.916227] usb 3-4: Product: H5321 gw [ 36.916230] usb 3-4: Manufacturer: Lenovo [ 36.916232] usb 3-4: SerialNumber: D91EC842BC2235M0 [ 36.952413] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [ 36.953614] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [ 36.955236] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [ 36.955239] cdc_wdm 3-4:1.5: Unknown control protocol [ 36.995644] cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device [ 36.996577] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 66:bf:27:a3:40:51 [ 36.997075] cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device [ 36.997079] cdc_wdm 3-4:1.8: Unknown control protocol [ 36.997627] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 37.862850] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 37.862954] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 38.502496] wlan0: authenticate with b8:d9:4d:d5:53:7e [ 38.505534] wlan0: send auth to b8:d9:4d:d5:53:7e (try 1/3) [ 38.532881] wlan0: authenticated [ 38.533296] wlan0: associate with b8:d9:4d:d5:53:7e (try 1/3) [ 38.536103] wlan0: RX AssocResp from b8:d9:4d:d5:53:7e (capab=0x511 status=0 aid=55) [ 38.553803] wlan0: associated [ 38.667085] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:d9:4d:d5:53:7e [ 38.667188] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 62.557507] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 62.557525] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 62.558056] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 62.558070] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 62.565579] elogind-daemon[915]: Lid closed. [ 64.453613] e1000e 0000:00:19.0 eth0: NIC Link is Down [ 65.270555] elogind-daemon[915]: Suspending... [ 65.271808] elogind-daemon[915]: Suspending system... [ 65.271822] PM: suspend entry (deep) [ 65.278125] Filesystems sync: 0.006 seconds [ 65.278673] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 65.279889] OOM killer disabled. [ 65.279890] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 65.281097] printk: Suspending console(s) (use no_console_suspend to debug) [ 65.409666] wlan0: deauthenticating from b8:d9:4d:d5:53:7e by local choice (Reason: 3=DEAUTH_LEAVING) [ 65.455030] e1000e: EEE TX LPI TIMER: 00000011 [ 65.496541] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 65.498269] sd 0:0:0:0: [sda] Stopping disk [ 65.723561] ACPI: EC: interrupt blocked [ 65.756893] ACPI: PM: Preparing to enter system sleep state S3 [ 65.760979] ACPI: EC: event blocked [ 65.760982] ACPI: EC: EC stopped [ 65.760983] ACPI: PM: Saving platform NVS memory [ 65.761002] Disabling non-boot CPUs ... [ 65.762596] smpboot: CPU 1 is now offline [ 65.765106] smpboot: CPU 2 is now offline [ 65.767566] smpboot: CPU 3 is now offline [ 65.769403] ACPI: PM: Low-level resume complete [ 65.769429] ACPI: EC: EC started [ 65.769429] ACPI: PM: Restoring platform NVS memory [ 65.769790] Enabling non-boot CPUs ... [ 65.769844] x86: Booting SMP configuration: [ 65.769845] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 65.772706] CPU1 is up [ 65.772744] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 65.775475] CPU2 is up [ 65.775516] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 65.778282] CPU3 is up [ 65.779574] ACPI: PM: Waking up from system sleep state S3 [ 65.786458] ACPI: EC: interrupt unblocked [ 65.819105] sd 0:0:0:0: [sda] Starting disk [ 65.824788] ACPI: EC: event unblocked [ 65.831614] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 66.074689] usb 3-4: reset high-speed USB device number 4 using xhci_hcd [ 66.087632] usb 1-1.6: reset high-speed USB device number 3 using ehci-pci [ 66.136703] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 66.151175] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 66.151200] ata5: SATA link down (SStatus 0 SControl 300) [ 66.153092] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 66.154136] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 66.154155] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 66.159437] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 66.160437] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 66.160443] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 66.162297] ata2.00: configured for UDMA/133 [ 66.181602] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 66.217759] usb 3-4: device firmware changed [ 66.580371] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] [ 66.684779] OOM killer enabled. [ 66.684782] Restarting tasks ... [ 66.684893] usb 3-4: USB disconnect, device number 4 [ 66.685317] done. [ 66.691103] PM: suspend exit [ 66.691125] elogind-daemon[915]: System resumed. [ 66.692887] elogind-daemon[915]: Lid opened. [ 66.701146] cdc_mbim 3-4:1.6 wwan0: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM [ 66.766203] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 66.766222] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 66.766228] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 66.786283] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 66.786301] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 66.786307] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 66.796243] ata1.00: configured for UDMA/133 [ 66.834221] usb 3-4: new high-speed USB device number 5 using xhci_hcd [ 66.975417] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1927, bcdDevice= 1.00 [ 66.975430] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 66.975434] usb 3-4: Product: H5321 gw [ 66.975437] usb 3-4: Manufacturer: Lenovo [ 66.975440] usb 3-4: SerialNumber: D91EC842BC223580 [ 66.977764] usbhid 3-4:1.0: can't add hid device: -71 [ 66.977785] usbhid: probe of 3-4:1.0 failed with error -71 [ 66.977967] usb 3-4: USB disconnect, device number 5 [ 68.194282] usb 3-4: new high-speed USB device number 6 using xhci_hcd [ 68.337408] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00 [ 68.337422] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 68.337427] usb 3-4: Product: H5321 gw [ 68.337430] usb 3-4: Manufacturer: Lenovo [ 68.337433] usb 3-4: SerialNumber: D91EC842BC2235M0 [ 68.371356] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [ 68.372300] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [ 68.375275] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [ 68.375295] cdc_wdm 3-4:1.5: Unknown control protocol [ 68.410513] cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device [ 68.411103] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 66:bf:27:a3:40:51 [ 68.411776] cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device [ 68.411779] cdc_wdm 3-4:1.8: Unknown control protocol [ 68.412304] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 68.880379] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 68.880448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 69.772372] wlan0: authenticate with b8:d9:4d:d5:53:7e [ 69.776450] wlan0: send auth to b8:d9:4d:d5:53:7e (try 1/3) [ 69.805579] wlan0: authenticated [ 69.807552] wlan0: associate with b8:d9:4d:d5:53:7e (try 1/3) [ 69.810491] wlan0: RX AssocResp from b8:d9:4d:d5:53:7e (capab=0x511 status=0 aid=56) [ 69.828071] wlan0: associated [ 69.921350] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:d9:4d:d5:53:7e [ 69.961428] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 183.760733] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 183.760740] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 183.761320] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 183.761332] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 183.769677] elogind-daemon[915]: Lid closed. [ 183.771854] elogind-daemon[915]: Suspending... [ 183.773061] elogind-daemon[915]: Suspending system... [ 183.773073] PM: suspend entry (deep) [ 183.778115] Filesystems sync: 0.005 seconds [ 183.778407] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 183.780314] OOM killer disabled. [ 183.780315] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 183.781583] printk: Suspending console(s) (use no_console_suspend to debug) [ 183.908926] wlan0: deauthenticating from b8:d9:4d:d5:53:7e by local choice (Reason: 3=DEAUTH_LEAVING) [ 183.953385] e1000e: EEE TX LPI TIMER: 00000011 [ 184.040532] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 184.042493] sd 0:0:0:0: [sda] Stopping disk [ 184.211042] ACPI: EC: interrupt blocked [ 184.244167] ACPI: PM: Preparing to enter system sleep state S3 [ 184.248293] ACPI: EC: event blocked [ 184.248296] ACPI: EC: EC stopped [ 184.248297] ACPI: PM: Saving platform NVS memory [ 184.248316] Disabling non-boot CPUs ... [ 184.249903] smpboot: CPU 1 is now offline [ 184.252475] smpboot: CPU 2 is now offline [ 184.255228] smpboot: CPU 3 is now offline [ 184.257061] ACPI: PM: Low-level resume complete [ 184.257086] ACPI: EC: EC started [ 184.257086] ACPI: PM: Restoring platform NVS memory [ 184.257450] Enabling non-boot CPUs ... [ 184.257503] x86: Booting SMP configuration: [ 184.257504] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 184.260361] CPU1 is up [ 184.260397] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 184.263130] CPU2 is up [ 184.263170] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 184.265957] CPU3 is up [ 184.267240] ACPI: PM: Waking up from system sleep state S3 [ 184.274188] ACPI: EC: interrupt unblocked [ 184.306320] sd 0:0:0:0: [sda] Starting disk [ 184.309179] ACPI: EC: event unblocked [ 184.318302] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 184.561922] usb 3-4: reset high-speed USB device number 6 using xhci_hcd [ 184.574887] usb 1-1.6: reset high-speed USB device number 3 using ehci-pci [ 184.627751] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 184.641762] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 184.641793] ata5: SATA link down (SStatus 0 SControl 300) [ 184.643711] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 184.644731] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 184.644739] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 184.650048] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 184.651050] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 184.651058] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 184.652920] ata2.00: configured for UDMA/133 [ 184.672337] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 184.701700] usb 3-4: device firmware changed [ 185.067404] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] [ 185.171359] OOM killer enabled. [ 185.171362] Restarting tasks ... [ 185.171438] usb 3-4: USB disconnect, device number 6 [ 185.174946] done. [ 185.175794] PM: suspend exit [ 185.175814] elogind-daemon[915]: System resumed. [ 185.176690] elogind-daemon[915]: Lid opened. [ 185.188625] cdc_mbim 3-4:1.6 wwan0: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM [ 185.303118] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 185.303133] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 185.303138] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 185.323278] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 185.323295] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 185.323301] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 185.333243] ata1.00: configured for UDMA/133 [ 185.338205] usb 3-4: new high-speed USB device number 7 using xhci_hcd [ 185.479217] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1927, bcdDevice= 1.00 [ 185.479231] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 185.479235] usb 3-4: Product: H5321 gw [ 185.479238] usb 3-4: Manufacturer: Lenovo [ 185.479241] usb 3-4: SerialNumber: D91EC842BC223580 [ 185.481364] usbhid 3-4:1.0: can't add hid device: -71 [ 185.481383] usbhid: probe of 3-4:1.0 failed with error -71 [ 185.481574] usb 3-4: USB disconnect, device number 7 [ 186.698207] usb 3-4: new high-speed USB device number 8 using xhci_hcd [ 186.840869] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00 [ 186.840882] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 186.840886] usb 3-4: Product: H5321 gw [ 186.840890] usb 3-4: Manufacturer: Lenovo [ 186.840892] usb 3-4: SerialNumber: D91EC842BC2235M0 [ 186.875391] cdc_acm 3-4:1.1: ttyACM0: USB ACM device [ 186.876288] cdc_acm 3-4:1.3: ttyACM1: USB ACM device [ 186.878307] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device [ 186.878315] cdc_wdm 3-4:1.5: Unknown control protocol [ 186.914027] cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device [ 186.914875] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 66:bf:27:a3:40:51 [ 186.915325] cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device [ 186.915328] cdc_wdm 3-4:1.8: Unknown control protocol [ 186.915710] cdc_acm 3-4:1.9: ttyACM2: USB ACM device [ 187.417630] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 187.417712] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 188.414913] wlan0: authenticate with b8:d9:4d:d5:53:7e [ 188.419083] wlan0: send auth to b8:d9:4d:d5:53:7e (try 1/3) [ 188.445551] wlan0: authenticated [ 188.448213] wlan0: associate with b8:d9:4d:d5:53:7e (try 1/3) [ 188.451207] wlan0: RX AssocResp from b8:d9:4d:d5:53:7e (capab=0x511 status=0 aid=57) [ 188.469782] wlan0: associated [ 188.575187] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:d9:4d:d5:53:7e [ 188.615277] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready