[  345.257812] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[  345.414062] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[  345.539062] usb 1-1: new full speed USB device using musb_hdrc and address 2
[  345.671875] usb 1-1: ep0 maxpacket = 8
[  345.671875] usb 1-1: skipped 3 descriptors after interface
[  345.671875] usb 1-1: default language 0x0409
[  345.671875] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=220
[  345.671875] usb 1-1: Product: Arduino Uno
[  345.671875] usb 1-1: Manufacturer: Arduino (www.arduino.cc)
[  345.671875] usb 1-1: SerialNumber: 6493534373335190F080
[  345.671875] usb 1-1: device v2341 p0001 is not supported
[  345.671875] usb 1-1: uevent
[  345.671875] usb 1-1: usb_probe_device
[  345.671875] usb 1-1: configuration #1 chosen from 1 choice
[  345.679687] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[  345.679687] usb 1-1:1.0: uevent
[  345.679687] usbtest 1-1:1.0: usb_probe_interface
[  345.679687] usbtest 1-1:1.0: usb_probe_interface - got id
[  345.679687] usbserial_generic 1-1:1.0: usb_probe_interface
[  345.679687] usbserial_generic 1-1:1.0: usb_probe_interface - got id
[  345.679687] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
[  345.679687] usb 1-1:1.1: uevent
[  345.679687] usbtest 1-1:1.1: usb_probe_interface
[  345.679687] usbtest 1-1:1.1: usb_probe_interface - got id
[  345.679687] usbserial_generic 1-1:1.1: usb_probe_interface
[  345.679687] usbserial_generic 1-1:1.1: usb_probe_interface - got id
[  345.679687] /home/bifh4/diablo-uarm-prereleased.gcc34qemu/work/kernel-diablo-2.6.21/kernel-source-diablo/drivers/usb/core/inode.c: creating file '002'
[  345.679687] hub 1-0:1.0: 100mA power budget left
[  345.679687] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[  345.679687] hub 1-0:1.0: port 1 enable change, status 00000103
[  347.679687] usb 1-1: usb auto-suspend
[  349.703125] hub 1-0:1.0: hub_suspend
[  349.703125] usb usb1: usb auto-suspend