[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-btc (trini@bill-the-cat) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #13 SMP Sun Sep 30 18:11:18 MST 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-btc root=UUID=ffbc1fc6-475d-407b-bd89-2b1e2b1f15e0 ro quiet splash bootdegraded=true vt.handoff=7 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000973ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000097400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfacefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfacf000-0x00000000bfb20fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfb21000-0x00000000bfb4ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfb50000-0x00000000bfb57fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfb58000-0x00000000bfb7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfd81fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfd82000-0x00000000bfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000042fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./890GX Pro3, BIOS P1.30 04/29/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D8FFF write-protect [ 0.000000] D9000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF00000000 write-back [ 0.000000] 1 base 0000BFF00000 mask FFFFFFF00000 uncachable [ 0.000000] 2 base 0000C0000000 mask FFFFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000430000000 aka 17152M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfefffff] [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfefffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xbfefffff @ [mem 0x1fbfd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x42fffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] [mem 0x400000000-0x42fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x42fffffff @ [mem 0xbfefe000-0xbfefffff] [ 0.000000] RAMDISK: [mem 0x35512000-0x36a80fff] [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bfb1b070 0005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000bfb1fa60 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120711/tbfadt-598) [ 0.000000] ACPI: DSDT 00000000bfb1b158 04905 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bfb52f80 00040 [ 0.000000] ACPI: APIC 00000000bfb1fb58 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000bfb1fbf0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 00000000bfb1fc30 0003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bfb1fc70 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bfb1fcb0 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000bfb1fce8 00CC0 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041fa00000-ffff88042f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x42fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00096fff] [ 0.000000] node 0: [mem 0x00100000-0xbfacefff] [ 0.000000] node 0: [mem 0xbfd82000-0xbfefffff] [ 0.000000] node 0: [mem 0x100001000-0x42fffffff] [ 0.000000] On node 0 totalpages: 4127699 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3905 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 765069 pages, LIFO batch:31 [ 0.000000] Normal zone: 52224 pages used for memmap [ 0.000000] Normal zone: 3290111 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 6 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xbff00000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s78912 r8192 d23488 u262144 [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4059085 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-btc root=UUID=ffbc1fc6-475d-407b-bd89-2b1e2b1f15e0 ro quiet splash bootdegraded=true vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] Memory: 16063616k/17563648k available (4424k kernel code, 1052852k absent, 447180k reserved, 4183k data, 652k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.010000] tsc: Detected 3300.380 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.76 BogoMIPS (lpj=33003800) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000019] Security Framework initialized [ 0.000027] AppArmor: AppArmor initialized [ 0.000032] Mount-cache hash table entries: 256 [ 0.000161] Initializing cgroup subsys cpuacct [ 0.000162] Initializing cgroup subsys devices [ 0.000163] Initializing cgroup subsys freezer [ 0.000164] Initializing cgroup subsys blkio [ 0.000165] Initializing cgroup subsys perf_event [ 0.000179] tseg: 00bff00000 [ 0.000180] CPU: Physical Processor ID: 0 [ 0.000180] CPU: Processor Core ID: 0 [ 0.000181] mce: CPU supports 6 MCE banks [ 0.000186] LVT offset 0 assigned for vector 0xf9 [ 0.000188] process: using AMD E400 aware idle routine [ 0.000190] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.000190] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.000190] tlb_flushall_shift is 0xffffffff [ 0.000220] ACPI: Core revision 20120711 [ 0.001653] ftrace: allocating 17491 entries in 69 pages [ 0.007122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107045] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00 [ 0.223285] Performance Events: AMD PMU driver. [ 0.223288] ... version: 0 [ 0.223289] ... bit width: 48 [ 0.223289] ... generic registers: 4 [ 0.223290] ... value mask: 0000ffffffffffff [ 0.223291] ... max period: 00007fffffffffff [ 0.223291] ... fixed-purpose events: 0 [ 0.223292] ... event mask: 000000000000000f [ 0.236573] process: System has AMD C1E enabled [ 0.236580] process: Switch to broadcast mode on CPU0 [ 0.236584] process: Switch to broadcast mode on CPU1 [ 0.249757] process: Switch to broadcast mode on CPU2 [ 0.262956] process: Switch to broadcast mode on CPU3 [ 0.276152] process: Switch to broadcast mode on CPU4 [ 0.223458] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.289321] process: Switch to broadcast mode on CPU5 [ 0.289322] Brought up 6 CPUs [ 0.289325] smpboot: Total of 6 processors activated (39604.56 BogoMIPS) [ 0.295892] devtmpfs: initialized [ 0.296035] NET: Registered protocol family 16 [ 0.296109] node 0 link 0: io port [c000, ffff] [ 0.296111] TOM: 00000000d0000000 aka 3328M [ 0.296113] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.296115] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.296117] node 0 link 0: mmio [f0000000, fe4fffff] [ 0.296119] node 0 link 0: mmio [fe500000, fe6fffff] [ 0.296120] node 0 link 0: mmio [fe700000, febfffff] [ 0.296121] node 0 link 0: mmio [fec00000, fffeffff] [ 0.296122] node 0 link 0: mmio [ffff0000, ffffffff] [ 0.296123] TOM2: 0000000430000000 aka 17152M [ 0.296124] bus: [bus 00-1f] on node 0 link 0 [ 0.296126] bus: 00 [io 0x0000-0xffff] [ 0.296126] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.296127] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.296128] bus: 00 [mem 0x430000000-0xfcffffffff] [ 0.296212] ACPI: bus type pci registered [ 0.296235] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.296237] PCI: not using MMCONFIG [ 0.296238] PCI: Using configuration type 1 for base access [ 0.296239] PCI: Using configuration type 1 for extended access [ 0.296696] bio: create slab at 0 [ 0.296742] ACPI: Added _OSI(Module Device) [ 0.296744] ACPI: Added _OSI(Processor Device) [ 0.296744] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.296745] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297112] ACPI: EC: Look up EC in DSDT [ 0.297536] ACPI: Executed 3 blocks of module-level executable AML code [ 0.376894] ACPI: Interpreter enabled [ 0.376896] ACPI: (supports S0 S5) [ 0.376902] ACPI: Using IOAPIC for interrupt routing [ 0.377001] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.377026] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.387915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.387977] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.388082] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff]) [ 0.388093] PCI host bridge to bus 0000:00 [ 0.388095] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.388096] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.388098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.388099] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.388100] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.388101] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] [ 0.388110] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.388149] pci 0000:00:01.0: [1849:9602] type 01 class 0x060400 [ 0.388174] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.388201] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.388216] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.388241] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.388251] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.388277] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.388295] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.388309] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097] [ 0.388316] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083] [ 0.388323] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077] [ 0.388329] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063] [ 0.388336] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f] [ 0.388342] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.388384] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.388393] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff] [ 0.388443] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.388456] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff] [ 0.388514] pci 0000:00:12.2: supports D1 D2 [ 0.388515] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.388531] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.388540] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff] [ 0.388590] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.388603] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff] [ 0.388661] pci 0000:00:13.2: supports D1 D2 [ 0.388662] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.388678] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.388729] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.388738] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047] [ 0.388745] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033] [ 0.388752] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027] [ 0.388758] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013] [ 0.388765] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f] [ 0.388791] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.388806] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.388853] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.388863] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.388916] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.388946] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.388955] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff] [ 0.389005] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.389056] pci 0000:00:15.0: supports D1 D2 [ 0.389075] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.389084] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff] [ 0.389134] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.389147] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff] [ 0.389205] pci 0000:00:16.2: supports D1 D2 [ 0.389206] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.389221] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.389231] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.389240] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.389248] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.389259] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.389281] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff] [ 0.389290] pci 0000:01:05.0: [1002:9714] type 00 class 0x030000 [ 0.389296] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.389300] pci 0000:01:05.0: reg 14: [io 0xe000-0xe0ff] [ 0.389303] pci 0000:01:05.0: reg 18: [mem 0xfe600000-0xfe60ffff] [ 0.389311] pci 0000:01:05.0: reg 24: [mem 0xfe500000-0xfe5fffff] [ 0.389324] pci 0000:01:05.0: supports D1 D2 [ 0.389331] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300 [ 0.389337] pci 0000:01:05.1: reg 10: [mem 0xfe610000-0xfe613fff] [ 0.389360] pci 0000:01:05.1: supports D1 D2 [ 0.389411] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.389414] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.389416] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 0.389418] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.389435] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff] [ 0.389445] pci 0000:02:00.0: [1b85:1041] type 00 class 0x010000 [ 0.389456] pci 0000:02:00.0: reg 10: [mem 0xfea40000-0xfea5ffff 64bit] [ 0.389465] pci 0000:02:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.389480] pci 0000:02:00.0: reg 30: [mem 0xfea60000-0xfea6ffff pref] [ 0.389506] pci 0000:02:00.0: supports D1 [ 0.389507] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.406566] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.406581] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.406631] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff] [ 0.406657] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.406682] pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.406773] pci 0000:03:00.0: supports D1 D2 [ 0.406778] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.426546] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.426561] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.426610] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff] [ 0.426639] pci 0000:04:00.0: [1969:1083] type 00 class 0x020000 [ 0.426669] pci 0000:04:00.0: reg 10: [mem 0xfe800000-0xfe83ffff 64bit] [ 0.426685] pci 0000:04:00.0: reg 18: [io 0xd000-0xd07f] [ 0.426811] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.446532] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.446545] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.446552] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.446580] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff] [ 0.446636] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.446649] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.446654] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.446660] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.446665] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) [ 0.446720] pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-ff] [ 0.446749] pci 0000:06:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.446786] pci 0000:06:00.0: reg 10: [mem 0xfe700000-0xfe7007ff 64bit] [ 0.446797] pci 0000:06:00.0: reg 18: [io 0xc000-0xc0ff] [ 0.446883] pci 0000:06:00.0: supports D2 [ 0.446885] pci 0000:06:00.0: PME# supported from D2 D3hot D3cold [ 0.466535] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.466549] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff] [ 0.466556] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.466589] pci_bus 0000:00: on NUMA node 0 [ 0.466599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.466807] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.466823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.466840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.466854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.466874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.466913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.466929] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.466930] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.469057] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.469093] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.469129] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.469164] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.469189] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.469208] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.469227] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.469246] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.469302] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.469304] vgaarb: loaded [ 0.469305] vgaarb: bridge control possible 0000:01:05.0 [ 0.469341] SCSI subsystem initialized [ 0.469342] ACPI: bus type scsi registered [ 0.469390] libata version 3.00 loaded. [ 0.469401] ACPI: bus type usb registered [ 0.469410] usbcore: registered new interface driver usbfs [ 0.469415] usbcore: registered new interface driver hub [ 0.469433] usbcore: registered new device driver usb [ 0.469466] PCI: Using ACPI for IRQ routing [ 0.475512] PCI: pci_cache_line_size set to 64 bytes [ 0.475569] e820: reserve RAM buffer [mem 0x00097400-0x0009ffff] [ 0.475570] e820: reserve RAM buffer [mem 0xbfacf000-0xbfffffff] [ 0.475572] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff] [ 0.475621] NetLabel: Initializing [ 0.475622] NetLabel: domain hash size = 128 [ 0.475623] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.475630] NetLabel: unlabeled traffic allowed by default [ 0.475646] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.475648] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.477674] Switching to clocksource hpet [ 0.478542] AppArmor: AppArmor Filesystem Enabled [ 0.478553] pnp: PnP ACPI init [ 0.478557] ACPI: bus type pnp registered [ 0.478633] pnp 00:00: [bus 00-ff] [ 0.478635] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.478636] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.478638] pnp 00:00: [io 0x0d00-0xffff window] [ 0.478639] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.478641] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.478642] pnp 00:00: [mem 0xd0000000-0xffffffff window] [ 0.478643] pnp 00:00: [mem 0x00000000 window] [ 0.478661] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.478678] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.478700] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.478701] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.478820] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.478821] pnp 00:02: [mem 0xc0000000-0xcfffffff] [ 0.478839] system 00:02: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.478841] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.478988] pnp 00:03: [io 0x040b] [ 0.478990] pnp 00:03: [io 0x04d6] [ 0.478991] pnp 00:03: [io 0x0c00-0x0c01] [ 0.478992] pnp 00:03: [io 0x0c14] [ 0.478993] pnp 00:03: [io 0x0c50-0x0c51] [ 0.478994] pnp 00:03: [io 0x0c52] [ 0.478994] pnp 00:03: [io 0x0c6c] [ 0.478995] pnp 00:03: [io 0x0c6f] [ 0.478996] pnp 00:03: [io 0x0cd0-0x0cd1] [ 0.478997] pnp 00:03: [io 0x0cd2-0x0cd3] [ 0.478998] pnp 00:03: [io 0x0cd4-0x0cd5] [ 0.478999] pnp 00:03: [io 0x0cd6-0x0cd7] [ 0.479000] pnp 00:03: [io 0x0cd8-0x0cdf] [ 0.479001] pnp 00:03: [io 0x0800-0x089f] [ 0.479003] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.479004] pnp 00:03: [io 0x0000-0x000f] [ 0.479005] pnp 00:03: [io 0x0b20-0x0b3f] [ 0.479006] pnp 00:03: [io 0x0900-0x090f] [ 0.479007] pnp 00:03: [io 0x0910-0x091f] [ 0.479008] pnp 00:03: [io 0xfe00-0xfefe] [ 0.479009] pnp 00:03: [io 0x0060-0x005f disabled] [ 0.479010] pnp 00:03: [io 0x0064-0x0063 disabled] [ 0.479011] pnp 00:03: [mem 0xfec00000-0xfec00fff] [ 0.479012] pnp 00:03: [mem 0xfee00000-0xfee00fff] [ 0.479013] pnp 00:03: [mem 0xfed80000-0xfed8ffff] [ 0.479014] pnp 00:03: [mem 0xfed61000-0xfed70fff] [ 0.479015] pnp 00:03: [mem 0xfec10000-0xfec10fff] [ 0.479017] pnp 00:03: [mem 0xfed00000-0xfed00fff] [ 0.479018] pnp 00:03: [mem 0xffc00000-0xffffffff] [ 0.479053] system 00:03: [io 0x040b] has been reserved [ 0.479055] system 00:03: [io 0x04d6] has been reserved [ 0.479056] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.479057] system 00:03: [io 0x0c14] has been reserved [ 0.479059] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.479060] system 00:03: [io 0x0c52] has been reserved [ 0.479061] system 00:03: [io 0x0c6c] has been reserved [ 0.479062] system 00:03: [io 0x0c6f] has been reserved [ 0.479066] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.479067] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.479068] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.479070] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.479071] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.479072] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.479074] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.479075] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.479076] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.479078] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.479080] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.479081] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.479083] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.479084] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.479086] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.479087] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.479089] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.479090] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.479118] pnp 00:04: [io 0x0000-0xffffffffffffffff disabled] [ 0.479120] pnp 00:04: [io 0x0290-0x029f] [ 0.479121] pnp 00:04: [io 0x0000-0xffffffffffffffff disabled] [ 0.479139] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.479141] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.479213] pnp 00:05: [dma 4] [ 0.479215] pnp 00:05: [io 0x0000-0x000f] [ 0.479217] pnp 00:05: [io 0x0081-0x0083] [ 0.479218] pnp 00:05: [io 0x0087] [ 0.479219] pnp 00:05: [io 0x0089-0x008b] [ 0.479220] pnp 00:05: [io 0x008f] [ 0.479221] pnp 00:05: [io 0x00c0-0x00df] [ 0.479231] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.479236] pnp 00:06: [io 0x0070-0x0071] [ 0.479242] pnp 00:06: [irq 8] [ 0.479252] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.479256] pnp 00:07: [io 0x0061] [ 0.479265] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.479273] pnp 00:08: [io 0x0010-0x001f] [ 0.479274] pnp 00:08: [io 0x0022-0x003f] [ 0.479275] pnp 00:08: [io 0x0044-0x005f] [ 0.479276] pnp 00:08: [io 0x0062-0x0063] [ 0.479277] pnp 00:08: [io 0x0065-0x006f] [ 0.479278] pnp 00:08: [io 0x0072-0x007f] [ 0.479279] pnp 00:08: [io 0x0080] [ 0.479280] pnp 00:08: [io 0x0084-0x0086] [ 0.479281] pnp 00:08: [io 0x0088] [ 0.479282] pnp 00:08: [io 0x008c-0x008e] [ 0.479283] pnp 00:08: [io 0x0090-0x009f] [ 0.479284] pnp 00:08: [io 0x00a2-0x00bf] [ 0.479285] pnp 00:08: [io 0x00e0-0x00ef] [ 0.479286] pnp 00:08: [io 0x04d0-0x04d1] [ 0.479310] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.479311] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.479315] pnp 00:09: [io 0x00f0-0x00ff] [ 0.479352] pnp 00:09: [irq 13] [ 0.479362] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.479386] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.479518] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.479521] pnp 00:0b: [irq 4] [ 0.479522] pnp 00:0b: [dma 0 disabled] [ 0.479549] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.479616] pnp 00:0c: [mem 0xfed00000-0xfed003ff] [ 0.479629] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.479631] pnp: PnP ACPI: found 13 devices [ 0.479632] ACPI: ACPI bus type pnp unregistered [ 0.485166] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.485169] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.485171] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 0.485173] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.485175] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.485178] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.485180] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.485182] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.485185] pci 0000:00:0a.0: PCI bridge to [bus 04] [ 0.485187] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.485189] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.485192] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.485200] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.485201] pci 0000:00:15.0: bridge window [io 0xc000-0xcfff] [ 0.485204] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.485231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.485232] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.485234] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.485235] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff] [ 0.485236] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.485237] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe6fffff] [ 0.485239] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.485240] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.485241] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.485243] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.485244] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.485245] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.485246] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.485247] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.485249] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xffffffff] [ 0.485250] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.485251] pci_bus 0000:06: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.485268] NET: Registered protocol family 2 [ 0.485342] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.486080] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.486305] TCP: Hash tables configured (established 262144 bind 65536) [ 0.486333] TCP: reno registered [ 0.486336] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.486463] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.486582] NET: Registered protocol family 1 [ 0.486589] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.576983] pci 0000:01:05.0: Boot video device [ 1.577087] PCI: CLS 64 bytes, default 64 [ 1.577148] Trying to unpack rootfs image as initramfs... [ 1.860083] Freeing initrd memory: 21948k freed [ 1.865059] PCI-DMA: Disabling AGP. [ 1.865211] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.865212] PCI-DMA: using GART IOMMU. [ 1.865214] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.868071] LVT offset 1 assigned for vector 0x400 [ 1.868080] IBS: LVT offset 1 assigned [ 1.868102] perf: AMD IBS detected (0x0000001f) [ 1.868166] audit: initializing netlink socket (disabled) [ 1.868175] type=2000 audit(1351123939.760:1): initialized [ 1.879196] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.880157] fuse init (API version 7.20) [ 1.880245] msgmni has been set to 31545 [ 1.880419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.880420] io scheduler noop registered [ 1.880421] io scheduler deadline registered [ 1.880443] io scheduler cfq registered (default) [ 1.880508] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.880545] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X [ 1.880581] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 1.880709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.880712] ACPI: Power Button [PWRB] [ 1.880731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.880732] ACPI: Power Button [PWRF] [ 1.880862] ACPI: processor limited to max C-state 1 [ 1.882755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.903276] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.923981] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.924111] Linux agpgart interface v0.103 [ 1.924785] brd: module loaded [ 1.925127] loop: module loaded [ 1.925496] scsi0 : pata_acpi [ 1.925553] scsi1 : pata_acpi [ 1.925586] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.925587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.925636] libphy: Fixed MDIO Bus: probed [ 1.925640] tun: Universal TUN/TAP device driver, 1.6 [ 1.925641] tun: (C) 1999-2004 Max Krasnyansky [ 1.925751] PPP generic driver version 2.4.2 [ 1.925830] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.928776] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.928779] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.928919] mousedev: PS/2 mouse device common for all mice [ 1.929012] rtc_cmos 00:06: RTC can wake from S4 [ 1.929084] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.929104] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.929145] device-mapper: uevent: version 1.0.3 [ 1.929216] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 1.929266] device-mapper: multipath: version 1.5.0 loaded [ 1.929267] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.929303] cpuidle: using governor ladder [ 1.929304] cpuidle: using governor menu [ 1.929344] TCP: cubic registered [ 1.929400] NET: Registered protocol family 10 [ 1.929496] NET: Registered protocol family 17 [ 1.929502] Key type dns_resolver registered [ 1.929737] registered taskstats version 1 [ 1.930151] rtc_cmos 00:06: setting system clock to 2012-10-25 00:12:20 UTC (1351123940) [ 1.930171] powernow-k8: Found 1 AMD Phenom(tm) II X6 1100T Processor (6 cpu cores) (version 2.20.00) [ 1.930190] powernow-k8: Core Performance Boosting: on. [ 1.930212] powernow-k8: 0 : pstate 0 (3300 MHz) [ 1.930213] powernow-k8: 1 : pstate 1 (2500 MHz) [ 1.930214] powernow-k8: 2 : pstate 2 (1700 MHz) [ 1.930215] powernow-k8: 3 : pstate 3 (800 MHz) [ 2.257851] Freeing unused kernel memory: 652k freed [ 2.257983] Write protecting the kernel read-only data: 8192k [ 2.261588] Freeing unused kernel memory: 1708k freed [ 2.262332] Freeing unused kernel memory: 128k freed [ 2.278497] udevd[83]: starting version 175 [ 2.287623] ahci 0000:00:11.0: version 3.0 [ 2.288541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.289268] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.289273] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs [ 2.290692] scsi2 : ahci [ 2.291490] scsi3 : ahci [ 2.291580] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.292155] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 2.292268] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.292286] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe900000 [ 2.292333] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 2.292495] xHCI xhci_add_endpoint called for root hub [ 2.292496] xHCI xhci_check_bandwidth called for root hub [ 2.292513] hub 1-0:1.0: USB hub found [ 2.292521] hub 1-0:1.0: 2 ports detected [ 2.292556] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.292625] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 2.292676] xHCI xhci_add_endpoint called for root hub [ 2.292677] xHCI xhci_check_bandwidth called for root hub [ 2.292688] hub 2-0:1.0: USB hub found [ 2.292692] hub 2-0:1.0: 2 ports detected [ 2.294075] scsi4 : ahci [ 2.295110] scsi5 : ahci [ 2.295153] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 2.295156] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 2.295158] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 2.295160] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 2.295267] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.295312] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 2.295318] QUIRK: Enable AMD PLL fix [ 2.295320] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.295346] ehci_hcd 0000:00:12.2: debug port 1 [ 2.295361] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.295554] mvsas 0000:02:00.0: mvsas: driver version 0.8.16 [ 2.296344] mvsas 0000:02:00.0: mvsas: PCI-E x4, Bandwidth Usage: 5.0 Gbps [ 2.316169] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.316354] hub 3-0:1.0: USB hub found [ 2.316357] hub 3-0:1.0: 5 ports detected [ 2.316424] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.316457] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.316460] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.316483] ehci_hcd 0000:00:13.2: debug port 1 [ 2.316492] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.327297] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.336142] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.336317] hub 4-0:1.0: USB hub found [ 2.336320] hub 4-0:1.0: 5 ports detected [ 2.336369] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 2.336398] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 2.336400] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.336422] ehci_hcd 0000:00:16.2: debug port 1 [ 2.336429] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.356131] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.356301] hub 5-0:1.0: USB hub found [ 2.356303] hub 5-0:1.0: 4 ports detected [ 2.356356] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.356393] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.356417] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.420155] hub 6-0:1.0: USB hub found [ 2.420161] hub 6-0:1.0: 5 ports detected [ 2.420197] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.420226] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.420238] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.480175] hub 7-0:1.0: USB hub found [ 2.480179] hub 7-0:1.0: 5 ports detected [ 2.480232] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.480262] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 2.480274] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.540089] hub 8-0:1.0: USB hub found [ 2.540093] hub 8-0:1.0: 2 ports detected [ 2.540140] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.540170] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 2.540183] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.600042] hub 9-0:1.0: USB hub found [ 2.600046] hub 9-0:1.0: 4 ports detected [ 2.635963] ata5: SATA link down (SStatus 0 SControl 300) [ 2.636006] ata3: SATA link down (SStatus 0 SControl 300) [ 2.835715] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.835754] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.836362] ata4.00: ATA-8: ST33000651AS, CC44, max UDMA/133 [ 2.836364] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.836526] ata6.00: ATA-8: ST33000651AS, CC44, max UDMA/133 [ 2.836528] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.837094] ata4.00: configured for UDMA/133 [ 2.837289] scsi 3:0:0:0: Direct-Access ATA ST33000651AS CC44 PQ: 0 ANSI: 5 [ 2.837358] ata6.00: configured for UDMA/133 [ 2.837486] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.837490] sd 3:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.837605] sd 3:0:0:0: [sda] Write Protect is off [ 2.837608] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.837612] scsi 5:0:0:0: Direct-Access ATA ST33000651AS CC44 PQ: 0 ANSI: 5 [ 2.837656] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.837723] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 2.837735] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.837784] sd 5:0:0:0: [sdb] Write Protect is off [ 2.837786] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.837820] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.865680] tsc: Refined TSC clocksource calibration: 3300.154 MHz [ 2.865691] Switching to clocksource tsc [ 2.887809] sda: sda1 sda2 sda3 [ 2.888231] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.895748] sdb: sdb1 sdb2 sdb3 [ 2.896024] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.908200] Btrfs loaded [ 2.909910] md: linear personality registered for level -1 [ 2.911177] md: multipath personality registered for level -4 [ 2.912386] md: raid0 personality registered for level 0 [ 2.913757] md: raid1 personality registered for level 1 [ 3.070987] md: bind [ 3.072120] md: bind [ 3.073549] md: bind [ 3.074827] bio: create slab at 1 [ 3.074962] md/raid1:md0: active with 2 out of 2 mirrors [ 3.074974] md0: detected capacity change from 0 to 42952294400 [ 3.076146] md0: unknown partition table [ 3.095608] md: bind [ 3.096797] md/raid1:md1: active with 2 out of 2 mirrors [ 3.096811] md1: detected capacity change from 0 to 2957629591552 [ 3.098070] md1: unknown partition table [ 3.385205] usb 6-3: new full-speed USB device number 2 using ohci_hcd [ 3.884711] usb 6-5: new full-speed USB device number 3 using ohci_hcd [ 4.067688] hub 6-5:1.0: USB hub found [ 4.069611] hub 6-5:1.0: 3 ports detected [ 4.355292] usb 6-5.1: new full-speed USB device number 4 using ohci_hcd [ 4.487221] usbcore: registered new interface driver usbhid [ 4.487223] usbhid: USB HID core driver [ 5.123549] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000 [ 5.123558] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10 [ 5.243473] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 0 attach dev info is 20001 [ 5.243475] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 0 attach sas addr is 0 [ 5.353343] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000 [ 5.353350] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10 [ 5.473265] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 1 attach dev info is 20001 [ 5.473266] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 1 attach sas addr is 1 [ 5.583119] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 2 attach dev info is 0 [ 5.583127] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 2 attach sas addr is 0 [ 5.693024] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 3 attach dev info is 0 [ 5.693031] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 3 attach sas addr is 0 [ 8.520390] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000 [ 8.520398] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10 [ 8.640313] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 4 attach dev info is 20001 [ 8.640314] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 4 attach sas addr is 4 [ 8.750178] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 838:get all reg link rate is 0x122000 [ 8.750185] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_94xx.c 843:get link rate is 10 [ 8.870099] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 5 attach dev info is 20001 [ 8.870100] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 5 attach sas addr is 5 [ 8.979957] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 6 attach dev info is 0 [ 8.979964] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 6 attach sas addr is 0 [ 9.089861] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1174:phy 7 attach dev info is 0 [ 9.089869] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 1176:phy 7 attach sas addr is 0 [ 9.089879] scsi6 : mvsas [ 9.090298] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 277:phy 0 byte dmaded. [ 9.090304] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 277:phy 1 byte dmaded. [ 9.090310] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 277:phy 4 byte dmaded. [ 9.090313] /home/trini/work/ssd/kernel/linux/drivers/scsi/mvsas/mv_sas.c 277:phy 5 byte dmaded. [ 9.090332] sas: phy-6:0 added to port-6:0, phy_mask:0x1 ( 0) [ 9.090354] sas: phy-6:1 added to port-6:1, phy_mask:0x2 ( 100000000000000) [ 9.090372] sas: phy-6:4 added to port-6:2, phy_mask:0x1 ( 400000000000000) [ 9.090387] sas: phy-6:5 added to port-6:3, phy_mask:0x2 ( 500000000000000) [ 9.090401] sas: DOING DISCOVERY on port 0, pid:49 [ 9.090405] sas: DONE DISCOVERY on port 0, pid:49, result:0 [ 9.090411] sas: DOING DISCOVERY on port 1, pid:49 [ 9.090414] sas: DONE DISCOVERY on port 1, pid:49, result:0 [ 9.090420] sas: DOING DISCOVERY on port 2, pid:49 [ 9.090423] sas: DONE DISCOVERY on port 2, pid:49, result:0 [ 9.090428] sas: DOING DISCOVERY on port 3, pid:49 [ 9.090431] sas: DONE DISCOVERY on port 3, pid:49, result:0 [ 9.090442] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.090453] sas: ata7: end_device-6:0: dev error handler [ 9.264709] ata7.00: ATA-8: OCZ-REVODRIVE3 X2, 2.11, max UDMA/133 [ 9.264711] ata7.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.271139] ata7.00: configured for UDMA/133 [ 9.271191] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.290117] scsi 6:0:0:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.11 PQ: 0 ANSI: 5 [ 9.290146] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.290157] sas: ata7: end_device-6:0: dev error handler [ 9.290159] sas: ata8: end_device-6:1: dev error handler [ 9.468567] ata8.00: ATA-8: OCZ-REVODRIVE3 X2, 2.11, max UDMA/133 [ 9.468569] ata8.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.471311] ata8.00: configured for UDMA/133 [ 9.471374] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.489916] scsi 6:0:1:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.11 PQ: 0 ANSI: 5 [ 9.489929] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.489942] sas: ata7: end_device-6:0: dev error handler [ 9.489945] sas: ata8: end_device-6:1: dev error handler [ 9.489947] sas: ata9: end_device-6:2: dev error handler [ 9.751048] ata9.00: ATA-8: OCZ-REVODRIVE3 X2, 2.11, max UDMA/133 [ 9.751050] ata9.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.761044] ata9.00: configured for UDMA/133 [ 9.761108] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.779634] scsi 6:0:2:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.11 PQ: 0 ANSI: 5 [ 9.779647] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 9.779682] sas: ata7: end_device-6:0: dev error handler [ 9.779693] sas: ata8: end_device-6:1: dev error handler [ 9.779697] sas: ata9: end_device-6:2: dev error handler [ 9.779698] sas: ata10: end_device-6:3: dev error handler [ 9.950817] ata10.00: ATA-8: OCZ-REVODRIVE3 X2, 2.11, max UDMA/133 [ 9.950819] ata10.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.960805] ata10.00: configured for UDMA/133 [ 9.960855] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 9.979287] scsi 6:0:3:0: Direct-Access ATA OCZ-REVODRIVE3 X 2.11 PQ: 0 ANSI: 5 [ 9.979483] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.979503] sd 6:0:0:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 9.979584] sd 6:0:1:0: Attached scsi generic sg3 type 0 [ 9.979600] sd 6:0:1:0: [sdd] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 9.979606] sd 6:0:0:0: [sdc] Write Protect is off [ 9.979608] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.979636] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.979701] sd 6:0:1:0: [sdd] Write Protect is off [ 9.979705] sd 6:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.979711] sd 6:0:2:0: [sde] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 9.979738] sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.979739] sd 6:0:2:0: Attached scsi generic sg4 type 0 [ 9.979787] sd 6:0:2:0: [sde] Write Protect is off [ 9.979788] sd 6:0:2:0: [sde] Mode Sense: 00 3a 00 00 [ 9.979800] sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.979883] sd 6:0:3:0: [sdf] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 9.979896] sd 6:0:3:0: Attached scsi generic sg5 type 0 [ 9.979973] sd 6:0:3:0: [sdf] Write Protect is off [ 9.979975] sd 6:0:3:0: [sdf] Mode Sense: 00 3a 00 00 [ 9.980001] sd 6:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.980535] sdc: unknown partition table [ 9.980708] sdd: unknown partition table [ 9.980757] sd 6:0:0:0: [sdc] Attached SCSI disk [ 9.980781] sde: unknown partition table [ 9.980879] sd 6:0:1:0: [sdd] Attached SCSI disk [ 9.980927] sdf: unknown partition table [ 9.980955] sd 6:0:2:0: [sde] Attached SCSI disk [ 9.981070] sd 6:0:3:0: [sdf] Attached SCSI disk [ 9.998940] md: bind [ 10.000508] md: bind [ 10.001929] md: bind [ 10.006798] md: bind [ 10.008270] md/raid0:md2: md_size is 468925440 sectors. [ 10.008271] md: RAID0 configuration for md2 - 1 zone [ 10.008272] md: zone0=[sdc/sdd/sde/sdf] [ 10.008275] zone-offset= 0KB, device-offset= 0KB, size= 234462720KB [ 10.008275] [ 10.008281] md2: detected capacity change from 0 to 240089825280 [ 10.009578] md2: unknown partition table [ 10.187828] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 11.253403] init: ureadahead main process (343) terminated with status 5 [ 12.648552] udevd[441]: starting version 175 [ 13.608215] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5.1/6-5.1:1.0/input/input2 [ 13.608296] hid-generic 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:12.0-5.1/input0 [ 13.609659] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5.1/6-5.1:1.1/input/input3 [ 13.609705] hid-generic 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:12.0-5.1/input1 [ 13.639488] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 13.753343] usbcore: registered new interface driver usbserial [ 13.753362] usbcore: registered new interface driver usbserial_generic [ 13.753372] USB Serial support registered for generic [ 13.753376] usbserial: USB Serial Driver core [ 13.763532] usbcore: registered new interface driver pl2303 [ 13.763546] USB Serial support registered for pl2303 [ 13.763556] pl2303 6-3:1.0: pl2303 converter detected [ 13.784616] usb 6-3: pl2303 converter now attached to ttyUSB0 [ 13.966846] [drm] Initialized drm 1.1.0 20060810 [ 14.481441] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 14.481528] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 14.481577] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 14.481613] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.481653] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.481691] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 14.481728] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 14.481948] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [ 14.504145] [drm] radeon defaulting to kernel modesetting. [ 14.504148] [drm] radeon kernel modesetting enabled. [ 14.548606] type=1400 audit(1351123953.119:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=800 comm="apparmor_parser" [ 14.548911] type=1400 audit(1351123953.119:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser" [ 14.549090] type=1400 audit(1351123953.119:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser" [ 14.567934] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11 [ 14.568299] [drm] initializing kernel modesetting (RS880 0x1002:0x9714 0x1849:0x9714). [ 14.568328] [drm] register mmio base: 0xFE600000 [ 14.568329] [drm] register mmio size: 65536 [ 14.568383] ATOM BIOS: B43106 [ 14.568404] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 14.568406] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 14.568411] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 14.568412] [drm] Detected VRAM RAM=256M, BAR=256M [ 14.568413] [drm] RAM width 32bits DDR [ 14.568454] [TTM] Zone kernel: Available graphics memory: 8077002 kiB [ 14.568455] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 14.568456] [TTM] Initializing pool allocator [ 14.568461] [TTM] Initializing DMA pool allocator [ 14.568478] [drm] radeon: 256M of VRAM memory ready [ 14.568479] [drm] radeon: 512M of GTT memory ready. [ 14.568486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.568486] [drm] Driver supports precise vblank timestamp query. [ 14.568499] [drm] radeon: irq initialized. [ 14.568503] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 14.569346] [drm] Loading RS780 Microcode [ 14.615457] Bridge firewalling registered [ 14.617787] device eth0 entered promiscuous mode [ 14.618940] atl1c 0000:04:00.0: irq 44 for MSI/MSI-X [ 14.619422] atl1c 0000:04:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 14.623628] br0: port 1(eth0) entered forwarding state [ 14.623633] br0: port 1(eth0) entered forwarding state [ 14.647041] kvm: Nested Virtualization enabled [ 14.647045] kvm: Nested Paging enabled [ 14.813739] EXT4-fs (md0): re-mounted. Opts: (null) [ 14.816771] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 14.816833] radeon 0000:01:05.0: WB enabled [ 14.816835] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88041990cc00 [ 14.817061] radeon 0000:01:05.0: setting latency timer to 64 [ 14.848906] [drm] ring test on 0 succeeded in 1 usecs [ 14.848971] [drm] ib test on ring 0 succeeded in 0 usecs [ 14.849109] [drm] Radeon Display Connectors [ 14.849110] [drm] Connector 0: [ 14.849111] [drm] VGA-1 [ 14.849113] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 14.849113] [drm] Encoders: [ 14.849114] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 14.849115] [drm] Connector 1: [ 14.849115] [drm] HDMI-A-1 [ 14.849116] [drm] HPD3 [ 14.849117] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 14.849118] [drm] Encoders: [ 14.849118] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 14.849135] [drm] radeon: power management initialized [ 14.930839] [drm] fb mappable at 0xD0142000 [ 14.930840] [drm] vram apper at 0xD0000000 [ 14.930841] [drm] size 4325376 [ 14.930842] [drm] fb depth is 24 [ 14.930842] [drm] pitch is 5632 [ 14.930908] fbcon: radeondrmfb (fb0) is primary device [ 14.984618] Console: switching to colour frame buffer device 170x48 [ 14.993549] fb0: radeondrmfb frame buffer device [ 14.993550] drm: registered panic notifier [ 14.993554] [drm] Initialized radeon 2.22.0 20080528 for 0000:01:05.0 on minor 0 [ 16.001430] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) [ 16.252356] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: discard [ 16.568721] RPC: Registered named UNIX socket transport module. [ 16.568723] RPC: Registered udp transport module. [ 16.568724] RPC: Registered tcp transport module. [ 16.568725] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.803000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.338853] init: smbd main process (1115) killed by HUP signal [ 17.338870] init: smbd main process ended, respawning [ 18.150070] type=1400 audit(1351123956.719:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1293 comm="apparmor_parser" [ 18.150424] type=1400 audit(1351123956.719:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1293 comm="apparmor_parser" [ 18.328441] init: bluetooth main process (1300) terminated with status 1 [ 18.328460] init: bluetooth main process ended, respawning [ 18.373301] init: failsafe main process (1100) killed by TERM signal [ 18.413929] init: bluetooth main process (1396) terminated with status 1 [ 18.413946] init: bluetooth main process ended, respawning [ 18.428999] init: bluetooth main process (1425) terminated with status 1 [ 18.429016] init: bluetooth main process ended, respawning [ 18.443011] init: bluetooth main process (1448) terminated with status 1 [ 18.443027] init: bluetooth main process ended, respawning [ 18.457069] init: bluetooth main process (1471) terminated with status 1 [ 18.457086] init: bluetooth main process ended, respawning [ 18.471264] init: bluetooth main process (1494) terminated with status 1 [ 18.471279] init: bluetooth main process ended, respawning [ 18.491361] init: bluetooth main process (1517) terminated with status 1 [ 18.491378] init: bluetooth main process ended, respawning [ 18.505212] init: bluetooth main process (1542) terminated with status 1 [ 18.505230] init: bluetooth main process ended, respawning [ 18.521113] init: bluetooth main process (1566) terminated with status 1 [ 18.521131] init: bluetooth main process ended, respawning [ 18.535452] init: bluetooth main process (1589) terminated with status 1 [ 18.535469] init: bluetooth main process ended, respawning [ 18.551377] init: bluetooth main process (1612) terminated with status 1 [ 18.551397] init: bluetooth respawning too fast, stopped [ 18.750377] type=1400 audit(1351123957.319:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1668 comm="apparmor_parser" [ 18.750689] type=1400 audit(1351123957.319:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1668 comm="apparmor_parser" [ 18.750903] type=1400 audit(1351123957.329:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1668 comm="apparmor_parser" [ 18.758977] type=1400 audit(1351123957.329:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1674 comm="apparmor_parser" [ 18.759339] type=1400 audit(1351123957.329:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1674 comm="apparmor_parser" [ 19.391772] init: gdm main process (1762) killed by TERM signal [ 20.635996] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.784195] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 20.794117] NFSD: starting 90-second grace period [ 20.889740] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.984637] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 23.626336] br0: port 1(eth0) entered forwarding state [ 23.717887] init: plymouth-stop pre-start process (2342) terminated with status 1