U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:42:03 -0700) ZyXEL NSA325 2-Bay Power Media Server SoC: Kirkwood 88F6282_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found 4864936 bytes read in 1129 ms (4.1 MiB/s) 7983279 bytes read in 1098 ms (6.9 MiB/s) 12863 bytes read in 2245 ms (4.9 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-5.1.11-kirkwood-tld-2 Created: 1970-01-01 0:16:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4864872 Bytes = 4.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: initramfs-5.1.11-kirkwood-tld-2 Created: 1970-01-01 0:17:01 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7983215 Bytes = 7.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 1f370000, end 1fb0d06f ... OK Loading Device Tree to 1f369000, end 1f36f23e ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.1.11-kirkwood-tld-2 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #3 PREEMPT Sat Jun 22 17:44:51 PDT 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-325 NAS (Rev A1) [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] random: get_random_bytes called from start_kernel+0x78/0x4f8 with crng_init=0 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) earlyprintk=serial [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000][ T0] Memory: 496376K/524288K available (9216K kernel code, 859K rwdata, 3204K rodata, 1024K init, 300K bss, 27912K reserved, 0K cma-reserved) [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000007][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008590][ T0] Switching to timer-based delay loop, resolution 5ns [ 0.015821][ T0] Console: colour dummy device 80x30 [ 0.021051][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.032363][ T0] pid_max: default: 32768 minimum: 301 [ 0.037999][ T0] LSM: Security Framework initializing [ 0.043524][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050916][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.059433][ T0] *** VALIDATE proc *** [ 0.063653][ T0] *** VALIDATE cgroup1 *** [ 0.067956][ T0] *** VALIDATE cgroup2 *** [ 0.072354][ T0] CPU: Testing write buffer coherency: ok [ 0.079454][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.086596][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.092755][ T1] rcu: Hierarchical SRCU implementation. [ 0.101088][ T1] devtmpfs: initialized [ 0.110233][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.120883][ T1] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.127949][ T1] xor: measuring software checksum speed [ 0.228610][ T1] arm4regs : 1453.200 MB/sec [ 0.328608][ T1] 8regs : 872.400 MB/sec [ 0.428611][ T1] 32regs : 1268.400 MB/sec [ 0.433514][ T1] xor: using function: arm4regs (1453.200 MB/sec) [ 0.439843][ T1] prandom: seed boundary self test passed [ 0.448564][ T1] prandom: 100 self tests passed [ 0.453407][ T1] pinctrl core: initialized pinctrl subsystem [ 0.460605][ T1] NET: Registered protocol family 16 [ 0.466210][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.474572][ T1] audit: initializing netlink subsys (disabled) [ 0.481827][ T14] audit: type=2000 audit(0.470:1): state=initialized audit_enabled=0 res=1 [ 0.490426][ T1] cpuidle: using governor ladder [ 0.495301][ T1] cpuidle: using governor menu [ 0.500439][ T1] Feroceon L2: Enabling L2 [ 0.504756][ T1] Feroceon L2: Cache support initialised. [ 0.510709][ T1] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.526123][ T1] No ATAGs? [ 0.698708][ T1] raid6: int32x8 gen() 171 MB/s [ 0.868668][ T1] raid6: int32x8 xor() 117 MB/s [ 1.038757][ T1] raid6: int32x4 gen() 176 MB/s [ 1.208741][ T1] raid6: int32x4 xor() 115 MB/s [ 1.378746][ T1] raid6: int32x2 gen() 187 MB/s [ 1.548680][ T1] raid6: int32x2 xor() 133 MB/s [ 1.718925][ T1] raid6: int32x1 gen() 151 MB/s [ 1.888905][ T1] raid6: int32x1 xor() 100 MB/s [ 1.893883][ T1] raid6: using algorithm int32x2 gen() 187 MB/s [ 1.900007][ T1] raid6: .... xor() 133 MB/s, rmw enabled [ 1.905602][ T1] raid6: using intx1 recovery algorithm [ 1.911245][ T1] vgaarb: loaded [ 1.915041][ T1] SCSI subsystem initialized [ 1.919898][ T1] usbcore: registered new interface driver usbfs [ 1.926150][ T1] usbcore: registered new interface driver hub [ 1.932275][ T1] usbcore: registered new device driver usb [ 1.938164][ T1] pps_core: LinuxPPS API ver. 1 registered [ 1.943865][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.953753][ T1] PTP clock support registered [ 1.959336][ T1] clocksource: Switched to clocksource orion_clocksource [ 2.559346][ C0] random: fast init done [ 2.739728][ T1] VFS: Disk quotas dquot_6.6.0 [ 2.744432][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.759145][ T1] NET: Registered protocol family 2 [ 2.764928][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 2.773391][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.781244][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 2.788452][ T1] TCP: Hash tables configured (established 4096 bind 4096) [ 2.795626][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.802208][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.809390][ T1] NET: Registered protocol family 1 [ 2.814951][ T1] RPC: Registered named UNIX socket transport module. [ 2.821657][ T1] RPC: Registered udp transport module. [ 2.827080][ T1] RPC: Registered tcp transport module. [ 2.832510][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.839878][ T1] Unpacking initramfs... [ 3.378549][ T1] Freeing initrd memory: 7800K [ 3.383384][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.391646][ T1] Initialise system trusted keyrings [ 3.396852][ T1] Key type blacklist registered [ 3.401806][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.409043][ T1] zbud: loaded [ 3.413169][ T1] NFS: Registering the id_resolver key type [ 3.418955][ T1] Key type id_resolver registered [ 3.423915][ T1] Key type id_legacy registered [ 3.428648][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.436100][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.443421][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 3.451376][ T1] fuse init (API version 7.29) [ 3.456313][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.463629][ T1] orangefs_init: module version upstream loaded [ 3.469762][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 7.971550][ T83] alg: No test for lzo-rle (lzo-rle-generic) [ 7.980929][ T85] alg: No test for lzo-rle (lzo-rle-scomp) [ 8.038061][ T1] async_tx: api initialized (async) [ 8.043235][ T1] Key type asymmetric registered [ 8.048041][ T1] Asymmetric key parser 'x509' registered [ 8.053839][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 8.063203][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 8.072892][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 8.139952][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 8.149586][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 8.209942][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 8.219779][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.227812][ T1] printk: console [ttyS0] disabled [ 8.232910][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 8.242674][ T1] printk: console [ttyS0] enabled [ 8.242674][ T1] printk: console [ttyS0] enabled [ 8.252498][ T1] printk: bootconsole [earlycon0] disabled [ 8.252498][ T1] printk: bootconsole [earlycon0] disabled [ 8.269605][ T1] loop: module loaded [ 8.273956][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 8.281550][ T1] scsi host0: sata_mv [ 8.285842][ T1] scsi host1: sata_mv [ 8.289963][ T1] ata1: SATA max UDMA/133 irq 33 [ 8.294776][ T1] ata2: SATA max UDMA/133 irq 33 [ 8.300274][ T1] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1 [ 8.307430][ T1] nand: Eon NAND 128MiB 3,3V 8-bit [ 8.312440][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 8.320754][ T1] Scanning device for bad blocks [ 8.330377][ T1] Bad eraseblock 100 at 0x000000c80000 [ 8.340466][ T1] Bad eraseblock 200 at 0x000001900000 [ 8.384991][ T1] 9 cmdlinepart partitions found on MTD device orion_nand [ 8.391999][ T1] Creating 9 MTD partitions on "orion_nand": [ 8.397858][ T1] 0x000000000000-0x000000100000 : "uboot" [ 8.404468][ T1] 0x000000100000-0x000000180000 : "uboot_env" [ 8.411359][ T1] 0x000000180000-0x000000200000 : "key_store" [ 8.418215][ T1] 0x000000200000-0x000000280000 : "info" [ 8.424670][ T1] 0x000000280000-0x000000c80000 : "etc" [ 8.431069][ T1] 0x000000c80000-0x000001680000 : "kernel_1" [ 8.437861][ T1] 0x000001680000-0x000004640000 : "rootfs1" [ 8.444708][ T1] 0x000004640000-0x000005040000 : "kernel_2" [ 8.451550][ T1] 0x000005040000-0x000008000000 : "rootfs2" [ 8.459300][ T1] libphy: Fixed MDIO Bus: probed [ 8.464760][ T1] libphy: orion_mdio_bus: probed [ 8.469803][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing. [ 8.478079][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.485955][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 8.492931][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.500255][ T1] ehci-pci: EHCI PCI platform driver [ 8.505461][ T1] ehci-orion: EHCI orion driver [ 8.510368][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.516596][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 8.525176][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 8.559354][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.566306][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 8.575340][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.583321][ T1] usb usb1: Product: EHCI Host Controller [ 8.588937][ T1] usb usb1: Manufacturer: Linux 5.1.11-kirkwood-tld-2 ehci_hcd [ 8.596391][ T1] usb usb1: SerialNumber: f1050000.ehci [ 8.602302][ T1] hub 1-0:1.0: USB hub found [ 8.606795][ T1] hub 1-0:1.0: 1 port detected [ 8.612016][ T1] usbcore: registered new interface driver usb-storage [ 8.619047][ T1] mousedev: PS/2 mouse device common for all mice [ 8.630459][ T112] ata1: SATA link down (SStatus 0 SControl F300) [ 8.970787][ T114] ata2: SATA link down (SStatus 0 SControl F300) [ 8.979358][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 9.180933][ T15] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32 [ 9.189863][ T15] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.197740][ T15] usb 1-1: Product: USB2.0 Hub [ 9.203061][ T15] hub 1-1:1.0: USB hub found [ 9.207807][ T15] hub 1-1:1.0: 4 ports detected [ 9.529356][ T15] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 9.681551][ T15] usb 1-1.2: New USB device found, idVendor=0781, idProduct=540e, bcdDevice= 0.10 [ 9.690668][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.696928][ T1] i2c /dev entries driver [ 9.701170][ T15] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.709212][ T15] usb 1-1.2: Product: Cruzer Contour [ 9.715595][ T1] device-mapper: uevent: version 1.0.3 [ 9.720995][ T15] usb 1-1.2: Manufacturer: SanDisk Corporation [ 9.727028][ T15] usb 1-1.2: SerialNumber: 0000168307706D68 [ 9.733026][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 9.742826][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 9.750330][ T15] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 9.757446][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 9.765045][ T15] scsi host2: usb-storage 1-1.2:1.0 [ 9.770581][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 9.778039][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 9.784894][ T1] device-mapper: raid: Loading target version 1.14.0 [ 9.792575][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 9.798963][ T1] drop_monitor: Initializing network drop monitor service [ 9.806223][ T1] NET: Registered protocol family 17 [ 9.811596][ T1] Key type dns_resolver registered [ 9.817224][ T1] registered taskstats version 1 [ 9.822068][ T1] Loading compiled-in X.509 certificates [ 9.827635][ T1] zswap: loaded using pool lzo/zbud [ 9.861609][ T1] Key type big_key registered [ 9.877587][ T1] Key type encrypted registered [ 9.884187][ T1] hctosys: unable to open rtc device (rtc0) [ 9.893403][ T1] Freeing unused kernel memory: 1024K [ 9.919792][ T1] Checked W+X mappings: passed, no W+X pages found [ 9.926174][ T1] Run /init as init process Loading, please wait... starting version 232 [ 10.008366][ T160] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 10.024379][ T161] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.032417][ T160] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 10.366372][ T164] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 10.810389][ T7] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Contour 4.08 PQ: 0 ANSI: 2 [ 10.824737][ T35] sd 2:0:0:0: [sda] 32112269 512-byte logical blocks: (16.4 GB/15.3 GiB) [ 10.839988][ T35] sd 2:0:0:0: [sda] Write Protect is off [ 10.851416][ T35] sd 2:0:0:0: [sda] No Caching mode page found [ 10.857495][ T35] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 10.877282][ T35] sda: sda1 [ 10.890976][ T35] sd 2:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 rootfs: clean, 36279/1003680 files, 365923/4013820 blocks done. [ 21.305057][ T199] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'nas'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [ 23.079610][ T399] gpio-fan gpio_fan: GPIO fan initialized [ 23.107392][ T401] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [....] Waiting for /dev to be fully populated...[ 23.456118][ T397] orion_wdt: Initial timeout 21 sec [ 23.546247][ T424] marvell-cesa f1030000.crypto: CESA device successfully registered [ 23.588259][ T398] sd 2:0:0:0: Attached scsi generic sg0 type 0 done. [ ok ] Activating swap:. [ 24.537994][ T584] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 24.851132][ C0] random: crng init done [ 24.855260][ C0] random: 7 urandom warning(s) missed due to ratelimiting [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Failed to get interface index: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. ifup: failed to bring up eth0 failed. [ 27.224149][ T1172] NET: Registered protocol family 10 [ 27.231597][ T1172] Segment Routing with IPv6 [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1306 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1309 (klogd) . ok [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 nas ttyS0 nas login: