[212604.938] X.Org X Server 1.16.4 Release Date: 2014-12-20 [212604.939] X Protocol Version 11, Revision 0 [212604.940] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo [212604.940] Current Operating System: Linux NiTr0 4.0.5-gentoo #4 SMP Fri Aug 21 20:49:20 EEST 2015 x86_64 [212604.940] Kernel command line: root=/dev/sda5 [212604.941] Build Date: 19 August 2015 08:14:26PM [212604.941] [212604.942] Current version of pixman: 0.32.6 [212604.942] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [212604.943] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [212604.945] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 30 18:45:42 2015 [212604.945] (==) Using config file: "/etc/X11/xorg.conf" [212604.946] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [212604.946] (==) ServerLayout "X.org Configured" [212604.946] (**) |-->Screen "Screen0" (0) [212604.946] (**) | |-->Monitor "Monitor0" [212604.946] (**) | |-->Device "Card0" [212604.946] (**) |-->Input Device "Mouse0" [212604.946] (**) |-->Input Device "Keyboard0" [212604.946] (==) Automatically adding devices [212604.946] (==) Automatically enabling devices [212604.946] (==) Automatically adding GPU devices [212604.946] (**) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [212604.946] (**) ModulePath set to "/usr/lib64/xorg/modules" [212604.946] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [212604.947] (WW) Disabling Mouse0 [212604.947] (WW) Disabling Keyboard0 [212604.947] (II) Loader magic: 0x806c80 [212604.947] (II) Module ABI versions: [212604.947] X.Org ANSI C Emulation: 0.4 [212604.947] X.Org Video Driver: 18.0 [212604.947] X.Org XInput driver : 21.0 [212604.947] X.Org Server Extension : 8.0 [212604.949] (--) PCI:*(0:3:0:0) 102b:0522:8086:0101 rev 2, Mem @ 0xb0000000/16777216, 0xb1800000/16384, 0xb1000000/8388608, BIOS @ 0x????????/65536 [212604.949] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [212604.949] (II) LoadModule: "glx" [212604.950] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [212604.951] (II) Module glx: vendor="X.Org Foundation" [212604.952] compiled for 1.16.4, module version = 1.0.0 [212604.952] ABI class: X.Org Server Extension, version 8.0 [212604.952] (==) AIGLX enabled [212604.952] (II) LoadModule: "mga" [212604.952] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so [212604.952] (II) Module mga: vendor="X.Org Foundation" [212604.952] compiled for 1.16.4, module version = 1.6.3 [212604.952] Module class: X.Org Video Driver [212604.952] ABI class: X.Org Video Driver, version 18.0 [212604.952] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550 [212604.952] (--) using VT number 8 [212604.963] (II) Loading sub module "vgahw" [212604.963] (II) LoadModule: "vgahw" [212604.963] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [212604.964] (II) Module vgahw: vendor="X.Org Foundation" [212604.964] compiled for 1.16.4, module version = 0.1.0 [212604.964] ABI class: X.Org Video Driver, version 18.0 [212604.964] (--) MGA(0): Chipset: "mgag200 SE A PCI" [212604.964] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips. If you don't intend to use video redirection enable with Option "HWCursor" "On" [212604.964] xf86TokenToOptinfo: table is NULL [212604.964] xf86TokenToOptinfo: table is NULL [212604.964] (==) MGA(0): Using SW cursor [212604.964] (--) MGA(0): Linear framebuffer at 0xB0000000 [212604.964] (--) MGA(0): MMIO registers at 0xB1800000 [212604.964] (--) MGA(0): Pseudo-DMA transfer window at 0xB1000000 [212604.964] (II) MGA(0): MAPPED Framebuffer B0000000 400000 to 7F6D31A85000. [212604.964] (II) MGA(0): UNMAPPING framebuffer 0x7F6D31A85000, 0x400000. [212604.964] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7F6D30E85000. [212605.036] (II) MGA(0): UNMAPPING framebuffer 0x7F6D30E85000, 0x1000000. [212605.036] (**) MGA(0): Depth 24, (**) framebuffer bpp 32 [212605.036] (==) MGA(0): RGB weight 888 [212605.036] (**) MGA(0): Option "AccelMethod" "EXA" [212605.036] (II) MGA(0): Disabling MTRR support. [212605.036] (==) MGA(0): Using AGP 1x mode [212605.036] (==) MGA(0): Using XAA acceleration [212605.037] (--) MGA(0): Video BIOS info block at offset 0x07AE0 [212605.037] (==) MGA(0): VideoRAM: 8128 kByte [212605.037] (II) Loading sub module "ddc" [212605.037] (II) LoadModule: "ddc" [212605.037] (II) Module "ddc" already built-in [212605.037] (II) Loading sub module "i2c" [212605.037] (II) LoadModule: "i2c" [212605.037] (II) Module "i2c" already built-in [212605.037] (II) MGA(0): MAPPED Framebuffer B0000000 7f0000 to 7F6D31695000. [212605.037] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [212605.407] (II) MGA(0): I2C bus "DDC P1" initialized. [212605.407] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. [212605.415] (--) MGA(0): No DDC signal [212605.415] (II) Loading sub module "vbe" [212605.415] (II) LoadModule: "vbe" [212605.415] (II) Loading /usr/lib64/xorg/modules/libvbe.so [212605.415] (II) Module vbe: vendor="X.Org Foundation" [212605.415] compiled for 1.16.4, module version = 1.1.0 [212605.415] ABI class: X.Org Video Driver, version 18.0 [212605.415] (II) Loading sub module "int10" [212605.415] (II) LoadModule: "int10" [212605.415] (II) Loading /usr/lib64/xorg/modules/libint10.so [212605.415] (II) Module int10: vendor="X.Org Foundation" [212605.415] compiled for 1.16.4, module version = 1.0.0 [212605.415] ABI class: X.Org Video Driver, version 18.0 [212605.415] (II) MGA(0): initializing int10 [212605.418] (II) MGA(0): Primary V_BIOS segment is: 0xc000 [212605.418] (II) MGA(0): VESA BIOS detected [212605.418] (II) MGA(0): VESA VBE Version 3.0 [212605.418] (II) MGA(0): VESA VBE Total Mem: 8128 kB [212605.418] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. [212605.418] (II) MGA(0): VESA VBE OEM Software Rev: 3.8 [212605.418] (II) MGA(0): VESA VBE OEM Vendor: Matrox [212605.418] (II) MGA(0): VESA VBE OEM Product: MGA-G200 [212605.418] (II) MGA(0): VESA VBE OEM Product Rev: 00 [212605.483] (II) MGA(0): VESA VBE DDC supported [212605.483] (II) MGA(0): VESA VBE DDC Level none [212605.483] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. [212605.547] (II) MGA(0): VESA VBE DDC read failed [212605.818] (II) MGA(0): UNMAPPING framebuffer 0x7F6D31695000, 0x7F0000. [212605.818] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) [212605.818] (==) MGA(0): Min pixel clock is 17 MHz [212605.818] (--) MGA(0): Max pixel clock is 230 MHz [212605.818] (II) MGA(0): Monitor0: Using hsync range of 30.00-82.00 kHz [212605.818] (II) MGA(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz [212605.818] (II) MGA(0): Clock range: 17.75 to 230.00 MHz [212605.818] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) [212605.818] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) [212605.818] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [212605.818] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [212605.818] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [212605.818] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "512x384" (vrefresh out of range) [212605.818] (II) MGA(0): Not using default mode "1152x864" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [212605.818] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [212605.818] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [212605.818] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [212605.818] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [212605.819] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [212605.819] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [212605.819] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [212605.819] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [212605.819] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [212605.819] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [212605.819] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [212605.819] (II) MGA(0): Not using mode "1280x1024" (no mode of this name) [212605.819] (II) MGA(0): Not using mode "1152x864" (no mode of this name) [212605.819] (--) MGA(0): Has SDRAM [212605.819] (--) MGA(0): Virtual size is 1024x768 (pitch 1024) [212605.819] (**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz [212605.819] (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd) [212605.819] (**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz [212605.819] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz zd) [212605.819] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz [212605.819] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz zd) [212605.819] (**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz [212605.819] (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d) [212605.819] (**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz [212605.819] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [212605.819] (**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz [212605.819] (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d) [212605.819] (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz [212605.819] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d) [212605.819] (**) MGA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) [212605.819] (II) MGA(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d) [212605.819] (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [212605.819] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [212605.819] (**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) [212605.819] (II) MGA(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [212605.819] (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [212605.819] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [212605.819] (**) MGA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) [212605.819] (II) MGA(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d) [212605.819] (**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) [212605.819] (II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [212605.819] (**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) [212605.819] (II) MGA(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d) [212605.819] (**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) [212605.819] (II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [212605.819] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz [212605.819] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) [212605.819] (**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) [212605.819] (II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [212605.819] (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz [212605.819] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [212605.819] (**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) [212605.819] (II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d) [212605.819] (**) MGA(0): Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D) [212605.819] (II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d) [212605.819] (**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) [212605.819] (II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d) [212605.819] (**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) [212605.819] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [212605.819] (**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) [212605.819] (II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d) [212605.819] (**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) [212605.819] (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d) [212605.819] (**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) [212605.819] (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d) [212605.819] (**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) [212605.819] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [212605.819] (**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) [212605.819] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [212605.819] (==) MGA(0): DPI set to (96, 96) [212605.819] (II) MGA(0): YDstOrg is set to 0 [212605.819] (II) Loading sub module "fb" [212605.819] (II) LoadModule: "fb" [212605.820] (II) Loading /usr/lib64/xorg/modules/libfb.so [212605.820] (II) Module fb: vendor="X.Org Foundation" [212605.820] compiled for 1.16.4, module version = 1.0.0 [212605.820] ABI class: X.Org ANSI C Emulation, version 0.4 [212605.820] (--) Depth 24 pixmap format is 32 bpp [212605.820] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7F6D2FA6B000. [212605.820] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [212606.360] (--) MGA(0): 64 DWORD fifo [212606.387] (II) MGA(0): Clock == 78750 [212606.387] (II) MGA(0): BitsPerPixel == 32 [212606.387] (II) MGA(0): HiPriLvl == 03 [212606.393] (==) MGA(0): Default visual is TrueColor [212606.393] (WW) MGA(0): Not supported by hardware, not initializing the DRI [212606.393] (II) MGA(0): Using -512 lines for offscreen memory. [212606.393] (==) MGA(0): Backing store enabled [212606.393] (==) MGA(0): Silken mouse enabled [212606.394] (==) MGA(0): DPMS enabled [212606.394] (WW) MGA(0): Direct rendering disabled [212606.394] (WW) MGA(0): Option "MTRR" is not used [212606.394] (==) RandR enabled [212606.401] (II) AIGLX: Screen 0 is not DRI2 capable [212606.401] (EE) AIGLX: reverting to software rendering [212606.414] (II) AIGLX: Loaded and initialized swrast [212606.414] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [212606.654] (II) config/udev: Adding input device Power Button (/dev/input/event5) [212606.654] (**) Power Button: Applying InputClass "evdev keyboard catchall" [212606.654] (**) Power Button: Applying InputClass "system-keyboard" [212606.654] (II) LoadModule: "evdev" [212606.654] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [212606.654] (II) Module evdev: vendor="X.Org Foundation" [212606.654] compiled for 1.16.4, module version = 2.9.1 [212606.654] Module class: X.Org XInput Driver [212606.654] ABI class: X.Org XInput driver, version 21.0 [212606.654] (II) Using input driver 'evdev' for 'Power Button' [212606.654] (**) Power Button: always reports core events [212606.654] (**) evdev: Power Button: Device: "/dev/input/event5" [212606.655] (--) evdev: Power Button: Vendor 0 Product 0x1 [212606.655] (--) evdev: Power Button: Found keys [212606.655] (II) evdev: Power Button: Configuring as keyboard [212606.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [212606.655] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [212606.655] (**) Option "xkb_rules" "evdev" [212606.655] (**) Option "xkb_model" "pc105" [212606.655] (**) Option "xkb_layout" "us,ru,ua" [212606.655] (**) Option "xkb_variant" ",winkeys,winkeys" [212606.655] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [212606.696] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [212606.696] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [212606.696] (**) Sleep Button: Applying InputClass "system-keyboard" [212606.696] (II) Using input driver 'evdev' for 'Sleep Button' [212606.696] (**) Sleep Button: always reports core events [212606.696] (**) evdev: Sleep Button: Device: "/dev/input/event4" [212606.696] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [212606.696] (--) evdev: Sleep Button: Found keys [212606.696] (II) evdev: Sleep Button: Configuring as keyboard [212606.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4" [212606.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [212606.697] (**) Option "xkb_rules" "evdev" [212606.697] (**) Option "xkb_model" "pc105" [212606.697] (**) Option "xkb_layout" "us,ru,ua" [212606.697] (**) Option "xkb_variant" ",winkeys,winkeys" [212606.697] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [212606.697] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event0) [212606.697] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev keyboard catchall" [212606.697] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "system-keyboard" [212606.697] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [212606.697] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [212606.697] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event0" [212606.697] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10 [212606.697] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found keys [212606.697] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as keyboard [212606.697] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046B:FF10.0001/input/input0/event0" [212606.697] (II) XINPUT: Adding extended input device "American Megatrends Inc. Virtual Keyboard and Mouse" (type: KEYBOARD, id 8) [212606.697] (**) Option "xkb_rules" "evdev" [212606.697] (**) Option "xkb_model" "pc105" [212606.697] (**) Option "xkb_layout" "us,ru,ua" [212606.697] (**) Option "xkb_variant" ",winkeys,winkeys" [212606.697] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [212606.698] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event1) [212606.698] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev pointer catchall" [212606.698] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [212606.698] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [212606.698] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event1" [212606.758] (EE) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Unable to open evdev device "/dev/input/event1". [212606.758] (EE) PreInit returned 2 for "American Megatrends Inc. Virtual Keyboard and Mouse" [212606.758] (II) UnloadModule: "evdev" [212606.758] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/mouse0) [212606.758] (II) No input driver specified, ignoring this device. [212606.758] (II) This device may have been added with another device file. [212606.759] (II) config/udev: Adding input device Barcode Reader (/dev/input/event2) [212606.759] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [212606.759] (**) Barcode Reader : Applying InputClass "system-keyboard" [212606.759] (II) Using input driver 'evdev' for 'Barcode Reader ' [212606.759] (**) Barcode Reader : always reports core events [212606.759] (**) evdev: Barcode Reader : Device: "/dev/input/event2" [212606.759] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [212606.759] (--) evdev: Barcode Reader : Found keys [212606.759] (II) evdev: Barcode Reader : Configuring as keyboard [212606.759] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:13BA:0018.0003/input/input2/event2" [212606.759] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 9) [212606.759] (**) Option "xkb_rules" "evdev" [212606.759] (**) Option "xkb_model" "pc105" [212606.759] (**) Option "xkb_layout" "us,ru,ua" [212606.759] (**) Option "xkb_variant" ",winkeys,winkeys" [212606.759] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [212606.760] (II) config/udev: Adding input device Barcode Reader (/dev/input/event3) [212606.760] (**) Barcode Reader : Applying InputClass "evdev pointer catchall" [212606.760] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [212606.760] (**) Barcode Reader : Applying InputClass "system-keyboard" [212606.761] (II) Using input driver 'evdev' for 'Barcode Reader ' [212606.761] (**) Barcode Reader : always reports core events [212606.761] (**) evdev: Barcode Reader : Device: "/dev/input/event3" [212606.761] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [212606.761] (--) evdev: Barcode Reader : Found 9 mouse buttons [212606.761] (--) evdev: Barcode Reader : Found scroll wheel(s) [212606.761] (--) evdev: Barcode Reader : Found relative axes [212606.761] (--) evdev: Barcode Reader : Found x and y relative axes [212606.761] (--) evdev: Barcode Reader : Found absolute axes [212606.761] (II) evdev: Barcode Reader : Forcing absolute x/y axes to exist. [212606.761] (--) evdev: Barcode Reader : Found keys [212606.761] (II) evdev: Barcode Reader : Configuring as mouse [212606.761] (II) evdev: Barcode Reader : Configuring as keyboard [212606.761] (II) evdev: Barcode Reader : Adding scrollwheel support [212606.761] (**) evdev: Barcode Reader : YAxisMapping: buttons 4 and 5 [212606.761] (**) evdev: Barcode Reader : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [212606.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:13BA:0018.0004/input/input3/event3" [212606.761] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 10) [212606.761] (**) Option "xkb_rules" "evdev" [212606.761] (**) Option "xkb_model" "pc105" [212606.761] (**) Option "xkb_layout" "us,ru,ua" [212606.761] (**) Option "xkb_variant" ",winkeys,winkeys" [212606.761] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [212606.761] (II) evdev: Barcode Reader : initialized for relative axes. [212606.761] (WW) evdev: Barcode Reader : ignoring absolute axes. [212606.762] (**) Barcode Reader : (accel) keeping acceleration scheme 1 [212606.762] (**) Barcode Reader : (accel) acceleration profile 0 [212606.762] (**) Barcode Reader : (accel) acceleration factor: 2.000 [212606.762] (**) Barcode Reader : (accel) acceleration threshold: 4 [212606.762] (II) config/udev: Adding input device Barcode Reader (/dev/input/mouse1) [212606.762] (**) Barcode Reader : Applying InputClass "system-keyboard" [212606.762] (II) No input driver specified, ignoring this device. [212606.762] (II) This device may have been added with another device file. [212613.855] (II) evdev: Barcode Reader : Close [212613.856] (II) UnloadModule: "evdev" [212613.856] (II) evdev: Barcode Reader : Close [212613.856] (II) UnloadModule: "evdev" [212613.856] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Close [212613.856] (II) UnloadModule: "evdev" [212613.856] (II) evdev: Sleep Button: Close [212613.856] (II) UnloadModule: "evdev" [212613.856] (II) evdev: Power Button: Close [212613.856] (II) UnloadModule: "evdev" [212614.232] (II) MGA(0): UNMAPPING framebuffer 0x7F6D2FA6B000, 0x1000000. [212614.243] (EE) Server terminated successfully (0). Closing log file.