[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-67-generic (buildd@brownie) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 (Ubuntu 3.2.0-67.101-generic 3.2.60) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-67-generic root=UUID=974f630b-fc6c-432d-9020-a3f2869e99a3 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfa6d000 (usable) [ 0.000000] BIOS-e820: 00000000bfa6d000 - 00000000bfaf8000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfaf8000 - 00000000bfafb000 (reserved) [ 0.000000] BIOS-e820: 00000000bfafb000 - 00000000bfafc000 (usable) [ 0.000000] BIOS-e820: 00000000bfafc000 - 00000000bfb03000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfb03000 - 00000000bfb4d000 (reserved) [ 0.000000] BIOS-e820: 00000000bfb4d000 - 00000000bfb55000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfb55000 - 00000000bfb7e000 (reserved) [ 0.000000] BIOS-e820: 00000000bfb7e000 - 00000000bfd81000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfd81000 - 00000000bff00000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100001000 - 0000000340000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme3, BIOS P1.60 06/26/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000340000000 aka 13312M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fd070] fd070 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff00000 page 4k [ 0.000000] kernel direct mapping tables up to bff00000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100001000-0000000340000000 [ 0.000000] 0100001000 - 0100200000 page 4k [ 0.000000] 0100200000 - 0140000000 page 2M [ 0.000000] 0140000000 - 0340000000 page 1G [ 0.000000] kernel direct mapping tables up to 340000000 @ bfefd000-bff00000 [ 0.000000] RAMDISK: 35a34000 - 36d12000 [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bfafc068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000bfb013d0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000bfafc150 0527D (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bfb4ff80 00040 [ 0.000000] ACPI: APIC 00000000bfb014c8 0009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000bfb01568 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 00000000bfb015a8 0003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bfb015e8 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000bfb01620 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000340000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000340000000 [ 0.000000] NODE_DATA [000000033fffb000 - 000000033fffffff] [ 0.000000] [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00340000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bfa6d [ 0.000000] 0: 0x000bfafb -> 0x000bfafc [ 0.000000] 0: 0x000bfd81 -> 0x000bff00 [ 0.000000] 0: 0x00100001 -> 0x00340000 [ 0.000000] On node 0 totalpages: 3144570 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 764973 pages, LIFO batch:31 [ 0.000000] Normal zone: 36864 pages used for memmap [ 0.000000] Normal zone: 2322431 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfa6d000 - 00000000bfaf8000 [ 0.000000] PM: Registered nosave memory: 00000000bfaf8000 - 00000000bfafb000 [ 0.000000] PM: Registered nosave memory: 00000000bfafc000 - 00000000bfb03000 [ 0.000000] PM: Registered nosave memory: 00000000bfb03000 - 00000000bfb4d000 [ 0.000000] PM: Registered nosave memory: 00000000bfb4d000 - 00000000bfb55000 [ 0.000000] PM: Registered nosave memory: 00000000bfb55000 - 00000000bfb7e000 [ 0.000000] PM: Registered nosave memory: 00000000bfb7e000 - 00000000bfd81000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000 [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000 [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000 [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000 [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:3ed00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88033fc00000 s83136 r8192 d23360 u262144 [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3091317 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-67-generic root=UUID=974f630b-fc6c-432d-9020-a3f2869e99a3 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 12214028k/13631488k available (6595k kernel code, 1053208k absent, 364252k reserved, 6611k data, 924k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1288 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 100663296 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3193.080 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.16 BogoMIPS (lpj=12772320) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004026] Security Framework initialized [ 0.004036] AppArmor: AppArmor initialized [ 0.004037] Yama: becoming mindful. [ 0.004864] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.012174] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.014425] Mount-cache hash table entries: 256 [ 0.014535] Initializing cgroup subsys cpuacct [ 0.014540] Initializing cgroup subsys memory [ 0.014547] Initializing cgroup subsys devices [ 0.014549] Initializing cgroup subsys freezer [ 0.014550] Initializing cgroup subsys blkio [ 0.014555] Initializing cgroup subsys perf_event [ 0.014577] tseg: 00bff00000 [ 0.014578] CPU: Physical Processor ID: 0 [ 0.014579] CPU: Processor Core ID: 0 [ 0.014581] mce: CPU supports 6 MCE banks [ 0.015655] ACPI: Core revision 20110623 [ 0.020014] ftrace: allocating 26609 entries in 105 pages [ 0.024420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065565] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.068003] Performance Events: AMD PMU driver. [ 0.068003] ... version: 0 [ 0.068003] ... bit width: 48 [ 0.068003] ... generic registers: 4 [ 0.068003] ... value mask: 0000ffffffffffff [ 0.068003] ... max period: 00007fffffffffff [ 0.068003] ... fixed-purpose events: 0 [ 0.068003] ... event mask: 000000000000000f [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 99000 [ 0.156023] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156079] #2 [ 0.156080] smpboot cpu 2: start_ip = 99000 [ 0.248027] NMI watchdog enabled, takes one hw-pmu counter. [ 0.248075] #3 [ 0.248076] smpboot cpu 3: start_ip = 99000 [ 0.340033] NMI watchdog enabled, takes one hw-pmu counter. [ 0.340103] #4 [ 0.340104] smpboot cpu 4: start_ip = 99000 [ 0.432047] NMI watchdog enabled, takes one hw-pmu counter. [ 0.432124] #5 [ 0.432125] smpboot cpu 5: start_ip = 99000 [ 0.524045] NMI watchdog enabled, takes one hw-pmu counter. [ 0.524088] Brought up 6 CPUs [ 0.524091] Total of 6 processors activated (38317.45 BogoMIPS). [ 0.528187] devtmpfs: initialized [ 0.533089] EVM: security.selinux [ 0.533090] EVM: security.SMACK64 [ 0.533091] EVM: security.capability [ 0.533153] PM: Registering ACPI NVS region at bfa6d000 (569344 bytes) [ 0.533153] PM: Registering ACPI NVS region at bfafc000 (28672 bytes) [ 0.533153] PM: Registering ACPI NVS region at bfb4d000 (32768 bytes) [ 0.533153] PM: Registering ACPI NVS region at bfb7e000 (2109440 bytes) [ 0.533153] print_constraints: dummy: [ 0.533153] RTC time: 20:55:35, date: 08/26/14 [ 0.533153] NET: Registered protocol family 16 [ 0.533153] node 0 link 0: io port [c000, ffff] [ 0.533153] TOM: 00000000c0000000 aka 3072M [ 0.533153] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.533153] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff] [ 0.533153] TOM2: 0000000340000000 aka 13312M [ 0.533153] bus: [00, 1f] on node 0 link 0 [ 0.533153] bus: 00 index 0 [io 0x0000-0xffff] [ 0.533153] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] [ 0.533153] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.533153] bus: 00 index 3 [mem 0x340000000-0xfcffffffff] [ 0.533153] Extended Config Space enabled on 1 nodes [ 0.533153] ACPI: bus type pci registered [ 0.533153] Trying to unpack rootfs image as initramfs... [ 0.533153] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.533153] PCI: not using MMCONFIG [ 0.533153] PCI: Using configuration type 1 for base access [ 0.533153] PCI: Using configuration type 1 for extended access [ 0.533657] bio: create slab at 0 [ 0.533657] ACPI: Added _OSI(Module Device) [ 0.533657] ACPI: Added _OSI(Processor Device) [ 0.533657] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.533657] ACPI: Added _OSI(Processor Aggregator Device) [ 0.533657] ACPI: EC: Look up EC in DSDT [ 0.536081] ACPI: Executed 3 blocks of module-level executable AML code [ 0.560292] ACPI: Interpreter enabled [ 0.560297] ACPI: (supports S0 S1 S3 S4 S5) [ 0.560315] ACPI: Using IOAPIC for interrupt routing [ 0.560427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.560453] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.748977] ACPI: No dock devices found. [ 0.748980] HEST: Table not found. [ 0.748983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.749051] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.749178] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.749179] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.749181] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.749183] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] [ 0.749184] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.749188] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff]) [ 0.749200] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600 [ 0.749251] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 [ 0.749278] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.749280] pci 0000:00:02.0: PME# disabled [ 0.749296] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604 [ 0.749322] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.749324] pci 0000:00:09.0: PME# disabled [ 0.749345] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.749361] pci 0000:00:11.0: reg 10: [io 0xf090-0xf097] [ 0.749368] pci 0000:00:11.0: reg 14: [io 0xf080-0xf083] [ 0.749376] pci 0000:00:11.0: reg 18: [io 0xf070-0xf077] [ 0.749384] pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063] [ 0.749391] pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f] [ 0.749399] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.749415] pci 0000:00:11.0: set SATA to AHCI mode [ 0.749455] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.749466] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff] [ 0.749524] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.749539] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff] [ 0.749606] pci 0000:00:12.2: supports D1 D2 [ 0.749607] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.749610] pci 0000:00:12.2: PME# disabled [ 0.749627] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.749638] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff] [ 0.749695] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.749710] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff] [ 0.749778] pci 0000:00:13.2: supports D1 D2 [ 0.749779] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.749782] pci 0000:00:13.2: PME# disabled [ 0.749800] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.749859] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.749870] pci 0000:00:14.1: reg 10: [io 0xf040-0xf047] [ 0.749877] pci 0000:00:14.1: reg 14: [io 0xf030-0xf033] [ 0.749885] pci 0000:00:14.1: reg 18: [io 0xf020-0xf027] [ 0.749892] pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013] [ 0.749900] pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f] [ 0.749931] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.749948] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.750001] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.750004] pci 0000:00:14.2: PME# disabled [ 0.750014] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.750076] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.750110] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.750120] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff] [ 0.750178] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.750239] pci 0000:00:15.0: supports D1 D2 [ 0.750259] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 [ 0.750320] pci 0000:00:15.1: supports D1 D2 [ 0.750343] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604 [ 0.750404] pci 0000:00:15.3: supports D1 D2 [ 0.750424] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.750434] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff] [ 0.750492] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.750507] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff] [ 0.750574] pci 0000:00:16.2: supports D1 D2 [ 0.750575] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.750578] pci 0000:00:16.2: PME# disabled [ 0.750594] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.750606] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.750616] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.750626] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.750638] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.750679] pci 0000:01:00.0: [1002:683d] type 0 class 0x000300 [ 0.750689] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.750696] pci 0000:01:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit] [ 0.750702] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.750711] pci 0000:01:00.0: reg 30: [mem 0xfea40000-0xfea5ffff pref] [ 0.750740] pci 0000:01:00.0: supports D1 D2 [ 0.750741] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.750744] pci 0000:01:00.0: PME# disabled [ 0.750763] pci 0000:01:00.1: [1002:aab0] type 0 class 0x000403 [ 0.750772] pci 0000:01:00.1: reg 10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.750819] pci 0000:01:00.1: supports D1 D2 [ 0.756061] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.756066] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.756068] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.756071] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.756108] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03 [ 0.756140] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.756204] pci 0000:02:00.0: supports D1 D2 [ 0.756205] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.756209] pci 0000:02:00.0: PME# disabled [ 0.764064] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.764070] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.764106] pci 0000:03:05.0: [11c1:0620] type 0 class 0x000780 [ 0.764149] pci 0000:03:05.0: reg 10: [io 0xd000-0xd0ff] [ 0.764239] pci 0000:03:05.0: PME# supported from D3hot D3cold [ 0.764243] pci 0000:03:05.0: PME# disabled [ 0.764261] pci 0000:03:06.0: [1033:0035] type 0 class 0x000c03 [ 0.764279] pci 0000:03:06.0: reg 10: [mem 0xfe802000-0xfe802fff] [ 0.764361] pci 0000:03:06.0: supports D1 D2 [ 0.764363] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot [ 0.764367] pci 0000:03:06.0: PME# disabled [ 0.764383] pci 0000:03:06.1: [1033:0035] type 0 class 0x000c03 [ 0.764401] pci 0000:03:06.1: reg 10: [mem 0xfe801000-0xfe801fff] [ 0.764484] pci 0000:03:06.1: supports D1 D2 [ 0.764485] pci 0000:03:06.1: PME# supported from D0 D1 D2 D3hot [ 0.764489] pci 0000:03:06.1: PME# disabled [ 0.764506] pci 0000:03:06.2: [1033:00e0] type 0 class 0x000c03 [ 0.764524] pci 0000:03:06.2: reg 10: [mem 0xfe800000-0xfe8000ff] [ 0.764605] pci 0000:03:06.2: supports D1 D2 [ 0.764607] pci 0000:03:06.2: PME# supported from D0 D1 D2 D3hot [ 0.764619] pci 0000:03:06.2: PME# disabled [ 0.764668] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.764671] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.764674] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.764678] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.764680] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.764681] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.764683] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.764723] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.764784] pci 0000:05:00.0: [14f1:8880] type 0 class 0x000400 [ 0.764812] pci 0000:05:00.0: reg 10: [mem 0xfe600000-0xfe7fffff 64bit] [ 0.764953] pci 0000:05:00.0: supports D1 D2 [ 0.764954] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 0.764959] pci 0000:05:00.0: PME# disabled [ 0.764980] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.764989] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 0.764995] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.765059] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200 [ 0.765074] pci 0000:06:00.0: reg 10: [io 0xc000-0xc0ff] [ 0.765101] pci 0000:06:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.765118] pci 0000:06:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.765190] pci 0000:06:00.0: supports D1 D2 [ 0.765191] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.765195] pci 0000:06:00.0: PME# disabled [ 0.772068] pci 0000:00:15.3: PCI bridge to [bus 06-06] [ 0.772074] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff] [ 0.772080] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.772103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.772257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.772280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT] [ 0.772323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.772362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.772379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 0.772396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT] [ 0.772413] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.772415] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.772416] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.775499] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.775539] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.775579] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.775617] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.775646] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.775678] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.775720] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.775745] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.775820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.775820] vgaarb: loaded [ 0.775820] vgaarb: bridge control possible 0000:01:00.0 [ 0.775780] Freeing initrd memory: 19320k freed [ 0.775820] i2c-core: driver [aat2870] using legacy suspend method [ 0.775820] i2c-core: driver [aat2870] using legacy resume method [ 0.775820] SCSI subsystem initialized [ 0.776145] libata version 3.00 loaded. [ 0.776145] usbcore: registered new interface driver usbfs [ 0.776145] usbcore: registered new interface driver hub [ 0.776178] usbcore: registered new device driver usb [ 0.776178] PCI: Using ACPI for IRQ routing [ 0.783370] PCI: pci_cache_line_size set to 64 bytes [ 0.783457] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.783458] reserve RAM buffer: 00000000bfa6d000 - 00000000bfffffff [ 0.783460] reserve RAM buffer: 00000000bfafc000 - 00000000bfffffff [ 0.783461] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff [ 0.783530] NetLabel: Initializing [ 0.783531] NetLabel: domain hash size = 128 [ 0.783532] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.783540] NetLabel: unlabeled traffic allowed by default [ 0.783583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.783583] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.785077] Switching to clocksource hpet [ 0.788591] AppArmor: AppArmor Filesystem Enabled [ 0.788607] pnp: PnP ACPI init [ 0.788617] ACPI: bus type pnp registered [ 0.788708] pnp 00:00: [bus 00-ff] [ 0.788710] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.788711] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.788713] pnp 00:00: [io 0x0d00-0xffff window] [ 0.788714] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.788716] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.788717] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.788719] pnp 00:00: [mem 0x00000000 window] [ 0.788761] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.788780] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.788814] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.788817] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.788866] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.788867] pnp 00:02: [mem 0xfec20000-0xfec200ff] [ 0.788895] system 00:02: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.788897] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.788922] pnp 00:03: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.788949] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.789070] pnp 00:04: [io 0x040b] [ 0.789072] pnp 00:04: [io 0x04d6] [ 0.789073] pnp 00:04: [io 0x0c00-0x0c01] [ 0.789074] pnp 00:04: [io 0x0c14] [ 0.789075] pnp 00:04: [io 0x0c50-0x0c51] [ 0.789076] pnp 00:04: [io 0x0c52] [ 0.789077] pnp 00:04: [io 0x0c6c] [ 0.789078] pnp 00:04: [io 0x0c6f] [ 0.789079] pnp 00:04: [io 0x0cd0-0x0cd1] [ 0.789080] pnp 00:04: [io 0x0cd2-0x0cd3] [ 0.789081] pnp 00:04: [io 0x0cd4-0x0cd5] [ 0.789082] pnp 00:04: [io 0x0cd6-0x0cd7] [ 0.789084] pnp 00:04: [io 0x0cd8-0x0cdf] [ 0.789085] pnp 00:04: [io 0x0800-0x089f] [ 0.789086] pnp 00:04: [io 0x0000-0xffffffffffffffff disabled] [ 0.789087] pnp 00:04: [io 0x0000-0x000f] [ 0.789089] pnp 00:04: [io 0x0b20-0x0b3f] [ 0.789090] pnp 00:04: [io 0x0900-0x090f] [ 0.789091] pnp 00:04: [io 0x0910-0x091f] [ 0.789092] pnp 00:04: [io 0xfe00-0xfefe] [ 0.789093] pnp 00:04: [io 0x0060-0x005f disabled] [ 0.789094] pnp 00:04: [io 0x0064-0x0063 disabled] [ 0.789096] pnp 00:04: [mem 0xfec00000-0xfec00fff] [ 0.789097] pnp 00:04: [mem 0xfee00000-0xfee00fff] [ 0.789098] pnp 00:04: [mem 0xfed80000-0xfed8ffff] [ 0.789100] pnp 00:04: [mem 0xfed61000-0xfed70fff] [ 0.789101] pnp 00:04: [mem 0xfec10000-0xfec10fff] [ 0.789102] pnp 00:04: [mem 0xfed00000-0xfed00fff] [ 0.789103] pnp 00:04: [mem 0xffc00000-0xffffffff] [ 0.789150] system 00:04: [io 0x040b] has been reserved [ 0.789152] system 00:04: [io 0x04d6] has been reserved [ 0.789153] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.789155] system 00:04: [io 0x0c14] has been reserved [ 0.789156] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.789158] system 00:04: [io 0x0c52] has been reserved [ 0.789159] system 00:04: [io 0x0c6c] has been reserved [ 0.789161] system 00:04: [io 0x0c6f] has been reserved [ 0.789162] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.789164] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.789165] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.789167] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.789168] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.789170] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.789171] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.789173] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.789174] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.789176] system 00:04: [io 0xfe00-0xfefe] has been reserved [ 0.789178] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.789180] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.789181] system 00:04: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.789183] system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.789185] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.789187] system 00:04: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.789188] system 00:04: [mem 0xffc00000-0xffffffff] has been reserved [ 0.789190] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.789222] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled] [ 0.789223] pnp 00:05: [io 0x0290-0x029f] [ 0.789225] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled] [ 0.789253] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.789255] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.789374] pnp 00:06: [dma 4] [ 0.789375] pnp 00:06: [io 0x0000-0x000f] [ 0.789376] pnp 00:06: [io 0x0081-0x0083] [ 0.789377] pnp 00:06: [io 0x0087] [ 0.789378] pnp 00:06: [io 0x0089-0x008b] [ 0.789379] pnp 00:06: [io 0x008f] [ 0.789380] pnp 00:06: [io 0x00c0-0x00df] [ 0.789399] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.789405] pnp 00:07: [io 0x0070-0x0071] [ 0.789413] pnp 00:07: [irq 8] [ 0.789431] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.789435] pnp 00:08: [io 0x0061] [ 0.789452] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.789461] pnp 00:09: [io 0x0010-0x001f] [ 0.789462] pnp 00:09: [io 0x0022-0x003f] [ 0.789463] pnp 00:09: [io 0x0044-0x005f] [ 0.789464] pnp 00:09: [io 0x0062-0x0063] [ 0.789465] pnp 00:09: [io 0x0065-0x006f] [ 0.789467] pnp 00:09: [io 0x0072-0x007f] [ 0.789468] pnp 00:09: [io 0x0080] [ 0.789469] pnp 00:09: [io 0x0084-0x0086] [ 0.789470] pnp 00:09: [io 0x0088] [ 0.789471] pnp 00:09: [io 0x008c-0x008e] [ 0.789472] pnp 00:09: [io 0x0090-0x009f] [ 0.789473] pnp 00:09: [io 0x00a2-0x00bf] [ 0.789474] pnp 00:09: [io 0x00e0-0x00ef] [ 0.789475] pnp 00:09: [io 0x04d0-0x04d1] [ 0.789509] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.789511] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.789515] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.789519] pnp 00:0a: [irq 13] [ 0.789537] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.789573] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.789711] pnp 00:0c: [io 0x03f8-0x03ff] [ 0.789715] pnp 00:0c: [irq 4] [ 0.789716] pnp 00:0c: [dma 0 disabled] [ 0.789756] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.790402] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 0.790452] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.790456] pnp: PnP ACPI: found 14 devices [ 0.790457] ACPI: ACPI bus type pnp unregistered [ 0.796899] PCI: max bus depth: 1 pci_try_num: 2 [ 0.796929] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.796932] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.796934] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.796936] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.796939] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.796941] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.796945] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.796947] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.796951] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.796958] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.796966] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 0.796969] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.796975] pci 0000:00:15.3: PCI bridge to [bus 06-06] [ 0.796977] pci 0000:00:15.3: bridge window [io 0xc000-0xcfff] [ 0.796982] pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.796996] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.797000] pci 0000:00:02.0: setting latency timer to 64 [ 0.797007] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.797009] pci 0000:00:09.0: setting latency timer to 64 [ 0.797020] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.797025] pci 0000:00:15.0: setting latency timer to 64 [ 0.797029] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.797034] pci 0000:00:15.1: setting latency timer to 64 [ 0.797038] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.797043] pci 0000:00:15.3: setting latency timer to 64 [ 0.797045] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.797047] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.797049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.797050] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 0.797052] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.797053] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.797055] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.797057] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.797058] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.797060] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.797061] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.797063] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.797064] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.797066] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff] [ 0.797068] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.797069] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.797071] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.797100] NET: Registered protocol family 2 [ 0.797334] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.798859] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.801218] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.801513] TCP: Hash tables configured (established 524288 bind 65536) [ 0.801514] TCP reno registered [ 0.801530] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.801625] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.801780] NET: Registered protocol family 1 [ 0.801812] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.884073] pci 0000:00:12.0: PCI INT A disabled [ 0.884120] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.884220] pci 0000:00:12.2: PCI INT B disabled [ 0.884226] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.968071] pci 0000:00:13.0: PCI INT A disabled [ 0.968100] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.968187] pci 0000:00:13.2: PCI INT B disabled [ 0.968222] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.048071] pci 0000:00:14.5: PCI INT C disabled [ 1.048108] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.132072] pci 0000:00:16.0: PCI INT A disabled [ 1.132100] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.132186] pci 0000:00:16.2: PCI INT B disabled [ 1.132224] pci 0000:01:00.0: Boot video device [ 1.132260] pci 0000:02:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 [ 1.132335] pci 0000:02:00.0: PCI INT A disabled [ 1.132346] pci 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.132371] pci 0000:03:06.0: PCI INT A disabled [ 1.132381] pci 0000:03:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.132405] pci 0000:03:06.1: PCI INT B disabled [ 1.132418] pci 0000:03:06.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 1.132445] pci 0000:03:06.2: PCI INT C disabled [ 1.132453] PCI: CLS 64 bytes, default 64 [ 1.133204] PCI-DMA: Disabling AGP. [ 1.135344] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.135346] PCI-DMA: using GART IOMMU. [ 1.135348] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.138822] IBS: LVT offset 1 assigned [ 1.138853] perf: AMD IBS detected (0x0000001f) [ 1.138987] audit: initializing netlink socket (disabled) [ 1.138996] type=2000 audit(1409086536.136:1): initialized [ 1.153079] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.155233] VFS: Disk quotas dquot_6.5.2 [ 1.155269] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.155672] fuse init (API version 7.17) [ 1.155739] msgmni has been set to 24022 [ 1.156257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.156287] io scheduler noop registered [ 1.156288] io scheduler deadline registered [ 1.156311] io scheduler cfq registered (default) [ 1.156721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.156736] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.156847] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.156851] ACPI: Power Button [PWRB] [ 1.156878] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.156880] ACPI: Power Button [PWRF] [ 1.156959] ACPI: acpi_idle registered with cpuidle [ 1.388333] ERST: Table is not found! [ 1.388335] GHES: HEST is not enabled! [ 1.388414] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.408804] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.437008] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.456393] Linux agpgart interface v0.103 [ 1.457506] brd: module loaded [ 1.458031] loop: module loaded [ 1.458147] ahci 0000:00:11.0: version 3.0 [ 1.458169] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.458306] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.458309] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 1.458794] scsi0 : ahci [ 1.458865] scsi1 : ahci [ 1.458927] scsi2 : ahci [ 1.458980] scsi3 : ahci [ 1.459050] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.459053] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.459055] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.459058] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.459308] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.459556] Fixed MDIO Bus: probed [ 1.459569] tun: Universal TUN/TAP device driver, 1.6 [ 1.459570] tun: (C) 1999-2004 Max Krasnyansky [ 1.459655] PPP generic driver version 2.4.2 [ 1.459723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.459743] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.459757] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.459796] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.459803] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.459822] QUIRK: Enable AMD PLL fix [ 1.459831] ehci_hcd 0000:00:12.2: debug port 1 [ 1.459847] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.468064] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.468349] hub 1-0:1.0: USB hub found [ 1.468351] hub 1-0:1.0: 5 ports detected [ 1.468430] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.468444] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.468489] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.468496] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.468512] ehci_hcd 0000:00:13.2: debug port 1 [ 1.468522] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.480057] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.480225] hub 2-0:1.0: USB hub found [ 1.480227] hub 2-0:1.0: 5 ports detected [ 1.480300] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.480313] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.480362] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.480369] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.480385] ehci_hcd 0000:00:16.2: debug port 1 [ 1.480395] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.492057] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.492225] hub 3-0:1.0: USB hub found [ 1.492227] hub 3-0:1.0: 4 ports detected [ 1.492296] ehci_hcd 0000:03:06.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 1.492311] ehci_hcd 0000:03:06.2: EHCI Host Controller [ 1.492352] ehci_hcd 0000:03:06.2: new USB bus registered, assigned bus number 4 [ 1.516097] ehci_hcd 0000:03:06.2: irq 23, io mem 0xfe800000 [ 1.528057] ehci_hcd 0000:03:06.2: USB 2.0 started, EHCI 1.00 [ 1.528232] hub 4-0:1.0: USB hub found [ 1.528235] hub 4-0:1.0: 5 ports detected [ 1.528312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.528332] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.528349] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.528405] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5 [ 1.528424] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.588132] hub 5-0:1.0: USB hub found [ 1.588138] hub 5-0:1.0: 5 ports detected [ 1.588209] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.588223] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.588277] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 1.588289] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.648129] hub 6-0:1.0: USB hub found [ 1.648135] hub 6-0:1.0: 5 ports detected [ 1.648209] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.648223] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.648279] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.648291] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.708155] hub 7-0:1.0: USB hub found [ 1.708160] hub 7-0:1.0: 2 ports detected [ 1.708232] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.708246] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.708302] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8 [ 1.708315] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.768157] hub 8-0:1.0: USB hub found [ 1.768162] hub 8-0:1.0: 4 ports detected [ 1.768237] ohci_hcd 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.768254] ohci_hcd 0000:03:06.0: OHCI Host Controller [ 1.768310] ohci_hcd 0000:03:06.0: new USB bus registered, assigned bus number 9 [ 1.768327] ohci_hcd 0000:03:06.0: irq 21, io mem 0xfe802000 [ 1.776118] ata3: SATA link down (SStatus 0 SControl 300) [ 1.853920] hub 9-0:1.0: USB hub found [ 1.853925] hub 9-0:1.0: 3 ports detected [ 1.854005] ohci_hcd 0000:03:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.854023] ohci_hcd 0000:03:06.1: OHCI Host Controller [ 1.854076] ohci_hcd 0000:03:06.1: new USB bus registered, assigned bus number 10 [ 1.854093] ohci_hcd 0000:03:06.1: irq 22, io mem 0xfe801000 [ 1.937919] hub 10-0:1.0: USB hub found [ 1.937924] hub 10-0:1.0: 2 ports detected [ 1.937999] uhci_hcd: USB Universal Host Controller Interface driver [ 1.938039] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48 [ 1.938055] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 1.938057] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.938111] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 11 [ 1.938212] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X [ 1.938313] xHCI xhci_add_endpoint called for root hub [ 1.938314] xHCI xhci_check_bandwidth called for root hub [ 1.938328] hub 11-0:1.0: USB hub found [ 1.938332] hub 11-0:1.0: 2 ports detected [ 1.938369] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.938398] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 12 [ 1.938470] xHCI xhci_add_endpoint called for root hub [ 1.938471] xHCI xhci_check_bandwidth called for root hub [ 1.938484] hub 12-0:1.0: USB hub found [ 1.938488] hub 12-0:1.0: 2 ports detected [ 1.948086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948128] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948171] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948918] ata2.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 [ 1.948921] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.949144] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 1.949145] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.949807] ata2.00: configured for UDMA/133 [ 1.950291] ata1.00: configured for UDMA/133 [ 1.950384] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 1.950548] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.950678] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.950742] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 1.950816] sd 0:0:0:0: [sda] Write Protect is off [ 1.950818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.950844] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.950854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.950858] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.950870] sd 1:0:0:0: [sdb] Write Protect is off [ 1.950872] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.950884] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.952297] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 1.952299] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.956301] ata4.00: configured for UDMA/133 [ 1.956461] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 1.956687] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.956820] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.957067] sd 3:0:0:0: [sdc] Write Protect is off [ 1.957070] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.957101] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.965250] sdb: sdb1 [ 1.965506] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.978881] sdc: sdc1 [ 1.979374] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.988189] usbcore: registered new interface driver libusual [ 1.988214] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.990693] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.990697] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.990793] mousedev: PS/2 mouse device common for all mice [ 1.990927] rtc_cmos 00:07: RTC can wake from S4 [ 1.991050] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.991072] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.991127] device-mapper: uevent: version 1.0.3 [ 1.991197] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.991276] cpuidle: using governor ladder [ 1.991423] cpuidle: using governor menu [ 1.991424] EFI Variables Facility v0.08 2004-May-17 [ 1.991581] TCP cubic registered [ 1.991647] NET: Registered protocol family 10 [ 1.991977] NET: Registered protocol family 17 [ 1.991980] Registering the dns_resolver key type [ 1.992129] PM: Hibernation image not present or could not be loaded. [ 1.992136] registered taskstats version 1 [ 1.998442] Magic number: 10:978:953 [ 1.998557] rtc_cmos 00:07: setting system clock to 2014-08-26 20:55:37 UTC (1409086537) [ 1.998605] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 1.998630] sda: sda1 sda2 < sda5 > [ 1.998635] powernow-k8: Core Performance Boosting: on. [ 1.998675] powernow-k8: 0 : pstate 0 (3200 MHz) [ 1.998676] powernow-k8: 1 : pstate 1 (2400 MHz) [ 1.998678] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1.998679] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.999111] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.999356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.999358] EDD information not available. [ 2.000536] Freeing unused kernel memory: 924k freed [ 2.000737] Write protecting the kernel read-only data: 12288k [ 2.004294] Freeing unused kernel memory: 1580k freed [ 2.007348] Freeing unused kernel memory: 1184k freed [ 2.027499] udevd[115]: starting version 175 [ 2.044292] scsi4 : pata_atiixp [ 2.044777] scsi5 : pata_atiixp [ 2.044914] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.044916] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.052285] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.052307] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.052358] r8169 0000:06:00.0: setting latency timer to 64 [ 2.052430] r8169 0000:06:00.0: irq 73 for MSI/MSI-X [ 2.052786] r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc900125ca000, bc:5f:f4:5b:bd:33, XID 0c900800 IRQ 73 [ 2.052789] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.060061] usb 2-4: new high-speed USB device number 2 using ehci_hcd [ 2.136170] Refined TSC clocksource calibration: 3193.080 MHz. [ 2.136184] Switching to clocksource tsc [ 2.211186] ata5.00: ATAPI: HL-DT-ST BD-RE WH14NS40, 1.00, max UDMA/100 [ 2.211181] Initializing USB Mass Storage driver... [ 2.211194] ata5.00: limited to UDMA/33 due to 40-wire cable [ 2.211291] scsi6 : usb-storage 2-4:1.0 [ 2.211347] usbcore: registered new interface driver usb-storage [ 2.211348] USB Mass Storage support registered. [ 2.224387] ata5.00: configured for UDMA/33 [ 2.241573] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE WH14NS40 1.00 PQ: 0 ANSI: 5 [ 2.261699] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.261708] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.261873] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.262060] sr 4:0:0:0: Attached scsi generic sg3 type 5 [ 2.312122] usb 2-5: new high-speed USB device number 3 using ehci_hcd [ 2.462428] scsi7 : usb-storage 2-5:1.0 [ 2.724081] usb 5-1: new full-speed USB device number 2 using ohci_hcd [ 3.156069] usb 5-2: new low-speed USB device number 3 using ohci_hcd [ 3.209663] scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 3.210059] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 3.212497] sd 6:0:0:0: [sdd] 16121856 512-byte logical blocks: (8.25 GB/7.68 GiB) [ 3.213002] sd 6:0:0:0: [sdd] Write Protect is off [ 3.213005] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 3.213504] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.213506] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.218128] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.218130] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.219032] sdd: sdd1 [ 3.221502] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.221504] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.221506] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 3.338316] generic-usb 0003:1941:8021.0001: hiddev0,hidraw0: USB HID v1.00 Device [HID 1941:8021] on usb-0000:00:12.0-2/input0 [ 3.338331] usbcore: registered new interface driver usbhid [ 3.338332] usbhid: USB HID core driver [ 3.465259] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 3.470109] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 3.474983] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 3.479881] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 3.480338] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 3.480504] sd 7:0:0:1: Attached scsi generic sg6 type 0 [ 3.480696] sd 7:0:0:2: Attached scsi generic sg7 type 0 [ 3.481501] sd 7:0:0:3: Attached scsi generic sg8 type 0 [ 3.504478] sd 7:0:0:1: [sdf] Attached SCSI removable disk [ 3.505259] sd 7:0:0:3: [sdh] Attached SCSI removable disk [ 3.506134] sd 7:0:0:2: [sdg] Attached SCSI removable disk [ 3.507761] sd 7:0:0:0: [sde] Attached SCSI removable disk [ 3.562213] vesafb: mode is 1680x1050x32, linelength=6912, pages=0 [ 3.562216] vesafb: scrolling: redraw [ 3.562218] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 3.569312] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90012600000, using 7104k, total 7104k [ 3.569449] Console: switching to colour frame buffer device 210x65 [ 3.569471] fb0: VESA VGA frame buffer device [ 3.588124] usb 5-4: new full-speed USB device number 4 using ohci_hcd [ 3.884075] usb 3-1: new high-speed USB device number 2 using ehci_hcd [ 3.971693] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.024103] usb 3-1: device descriptor read/64, error -71 [ 4.264060] usb 3-1: device descriptor read/64, error -71 [ 4.480070] usb 3-1: new high-speed USB device number 3 using ehci_hcd [ 4.616067] usb 3-1: device descriptor read/64, error -71 [ 4.856071] usb 3-1: device descriptor read/64, error -71 [ 5.072075] usb 3-1: new high-speed USB device number 4 using ehci_hcd [ 5.496054] usb 3-1: device not accepting address 4, error -71 [ 5.608086] usb 3-1: new high-speed USB device number 5 using ehci_hcd [ 6.032054] usb 3-1: device not accepting address 5, error -71 [ 6.032086] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 6.324068] usb 4-5: new high-speed USB device number 3 using ehci_hcd [ 6.710997] Adding 12573692k swap on /dev/sda5. Priority:-1 extents:1 across:12573692k [ 7.044063] usb 8-1: new full-speed USB device number 2 using ohci_hcd [ 7.104229] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.203306] usb 8-1: not running at top speed; connect to a high speed hub [ 7.221494] scsi8 : usb-storage 8-1:1.0 [ 7.485355] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.488067] usb 8-2: new full-speed USB device number 3 using ohci_hcd [ 7.864430] udevd[441]: starting version 175 [ 7.968071] usb 9-2: new low-speed USB device number 2 using ohci_hcd [ 8.227405] scsi 8:0:0:0: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2 [ 8.233405] scsi 8:0:0:1: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2 [ 8.233900] sd 8:0:0:0: Attached scsi generic sg9 type 0 [ 8.234036] sd 8:0:0:1: Attached scsi generic sg10 type 0 [ 8.251972] generic-usb 0003:0764:0501.0005: hiddev0,hidraw1: USB HID v1.10 Device [CPS BC 1000D] on usb-0000:03:06.0-2/input0 [ 8.303387] sd 8:0:0:0: [sdi] Attached SCSI removable disk [ 8.313392] sd 8:0:0:1: [sdj] Attached SCSI removable disk [ 8.364097] usb 11-2: new low-speed USB device number 2 using xhci_hcd [ 8.412600] usb 11-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 8.439668] input: Saitek AV8R Joystick as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb11/11-2/11-2:1.0/input/input2 [ 8.439749] generic-usb 0003:06A3:0461.0006: input,hidraw2: USB HID v1.00 Joystick [Saitek AV8R Joystick] on usb-0000:02:00.0-2/input0 [ 10.642947] lp: driver loaded but no devices found [ 11.912490] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 11.955473] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 11.955534] SP5100 TCO timer: mmio address 0xbafe00 already in use [ 11.991737] MCE: In-kernel MCE decoding enabled. [ 12.009681] EDAC MC: Ver: 2.1.0 [ 12.275199] AMD64 EDAC driver v3.4.0 [ 12.275249] EDAC amd64: DRAM ECC disabled. [ 12.275273] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.275290] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.275291] (Note that use of the override may cause unknown side effects.) [ 12.306596] type=1400 audit(1409104547.804:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=637 comm="apparmor_parser" [ 12.306610] type=1400 audit(1409104547.804:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=720 comm="apparmor_parser" [ 12.306916] type=1400 audit(1409104547.804:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser" [ 12.306934] type=1400 audit(1409104547.804:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser" [ 12.307085] type=1400 audit(1409104547.804:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser" [ 12.307116] type=1400 audit(1409104547.804:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser" [ 12.563246] type=1400 audit(1409104548.060:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=739 comm="apparmor_parser" [ 12.563258] type=1400 audit(1409104548.060:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=738 comm="apparmor_parser" [ 13.494680] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-2/input2 [ 13.500638] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:16.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/input/input3 [ 13.500754] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:16.0-2:1 [ 13.502798] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:16.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0004/input/input4 [ 13.502905] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:16.0-2:2 [ 14.176064] Registered IR keymap rc-rc6-mce [ 14.176311] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/rc/rc0/input5 [ 14.176398] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/rc/rc0 [ 14.199602] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 14.199605] Disabling lock debugging due to kernel taint [ 14.221725] IR NEC protocol handler initialized [ 14.262384] [fglrx] Maximum main memory to use for locked dma buffers: 11710 MBytes. [ 14.262626] [fglrx] vendor: 1002 device: 683d count: 1 [ 14.263010] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 14.263028] pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 14.263033] pci 0000:01:00.0: setting latency timer to 64 [ 14.263219] [fglrx] Kernel PAT support is enabled [ 14.263231] [fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors [ 14.268860] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.289936] IR RC5(x) protocol handler initialized [ 14.328647] IR RC6 protocol handler initialized [ 14.360786] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 14.360898] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.360961] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.361011] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 14.361063] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 14.361118] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 14.361166] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 14.361223] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 14.361453] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 [ 14.361527] snd_hda_intel 0000:01:00.1: irq 74 for MSI/MSI-X [ 14.361544] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 14.374747] IR JVC protocol handler initialized [ 14.400148] mceusb 5-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1 [ 14.400161] mceusb 5-1:1.0: 2 tx ports (0x1 cabled) and 2 rx sensors (0x1 active) [ 14.400254] usbcore: registered new interface driver mceusb [ 14.416925] IR Sony protocol handler initialized [ 14.428402] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input14 [ 14.428897] IR MCE Keyboard/mouse protocol handler initialized [ 14.430081] init: failsafe main process (876) killed by TERM signal [ 14.484654] lirc_dev: IR Remote Control driver registered, major 249 [ 14.503252] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 14.503255] IR LIRC bridge handler initialized [ 15.001983] Too many HDMI devices [ 15.001985] Too many HDMI devices [ 15.001986] Too many HDMI devices [ 15.001987] Too many HDMI devices [ 15.001988] Too many HDMI devices [ 15.001989] Too many HDMI devices [ 15.001990] Too many HDMI devices [ 15.001990] Too many HDMI devices [ 15.002080] hda-codec: out of range cmd 0:0:5fd0:707:40 [ 15.002082] hda-codec: out of range cmd 0:0:5fd0:708:85 [ 15.002324] hda-codec: out of range cmd 0:0:5fd0:f00:c [ 15.002325] hda-codec: out of range cmd 0:0:5fd0:709:0 [ 15.002326] hda-codec: out of range cmd 0:0:5fd0:f09:0 [ 15.002399] hda-codec: out of range cmd 0:0:e0:f0d:0 [ 15.002401] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0 [ 15.002416] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 15.002434] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 15.002452] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0 [ 15.002472] HDMI status: Codec=0 Pin=24528 Presence_Detect=1 ELD_Valid=1 [ 15.002473] hda-codec: out of range cmd 0:0:5fd0:f2e:8 [ 15.002476] hda_codec: cannot build controls for #0 (error -16) [ 15.002477] hda_codec: cannot revert codec [ 15.002819] snd_hda_intel 0000:01:00.1: PCI INT B disabled [ 15.002848] snd_hda_intel: probe of 0000:01:00.1 failed with error -16 [ 15.372219] ppdev: user-space parallel port driver [ 16.317123] type=1400 audit(1409104551.816:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1108 comm="apparmor_parser" [ 16.317503] type=1400 audit(1409104551.816:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1108 comm="apparmor_parser" [ 17.757678] audit_printk_skb: 33 callbacks suppressed [ 17.757681] type=1400 audit(1409104553.256:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1184 comm="apparmor_parser" [ 17.761684] type=1400 audit(1409104553.260:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1184 comm="apparmor_parser" [ 17.762476] type=1400 audit(1409104553.260:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1184 comm="apparmor_parser" [ 17.763201] type=1400 audit(1409104553.260:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1184 comm="apparmor_parser" [ 17.765553] type=1400 audit(1409104553.264:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1184 comm="apparmor_parser" [ 17.766244] type=1400 audit(1409104553.264:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1184 comm="apparmor_parser" [ 17.766699] type=1400 audit(1409104553.264:29): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1184 comm="apparmor_parser" [ 17.768261] type=1400 audit(1409104553.268:30): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1184 comm="apparmor_parser" [ 17.871648] Bluetooth: Core ver 2.16 [ 17.871666] NET: Registered protocol family 31 [ 17.871668] Bluetooth: HCI device and connection manager initialized [ 17.871670] Bluetooth: HCI socket layer initialized [ 17.871672] Bluetooth: L2CAP socket layer initialized [ 17.871676] Bluetooth: SCO socket layer initialized [ 17.910444] Bluetooth: RFCOMM TTY layer initialized [ 17.910448] Bluetooth: RFCOMM socket layer initialized [ 17.910449] Bluetooth: RFCOMM ver 1.11 [ 18.765844] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.765847] Bluetooth: BNEP filters: protocol multicast [ 20.848708] type=1400 audit(1409104556.348:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1354 comm="apparmor_parser" [ 24.277017] r8169 0000:06:00.0: eth0: link down [ 24.278333] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.278595] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.605746] vboxdrv: Found 6 processor cores. [ 24.606002] vboxdrv: fAsync=0 offMin=0x59d offMax=0x44b6 [ 24.606083] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.606084] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007). [ 25.316623] vboxpci: IOMMU not found (not registered) [ 26.064782] r8169 0000:06:00.0: eth0: link up [ 26.066215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.590920] fglrx_pci 0000:01:00.0: irq 74 for MSI/MSI-X [ 32.591353] [fglrx] Firegl kernel thread PID: 1665 [ 32.591399] [fglrx] Firegl kernel thread PID: 1666 [ 32.591445] [fglrx] Firegl kernel thread PID: 1667 [ 32.591514] [fglrx] IRQ 74 Enabled [ 32.598600] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 32.598602] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 [ 32.598604] [fglrx] Reserved FB block: Unshared offset:3ffee000, size:12000 [ 37.048058] eth0: no IPv6 routers present [ 52.812330] init: plymouth-stop pre-start process (2312) terminated with status 1 [ 142.758234] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 190.236113] usb 2-4: reset high-speed USB device number 2 using ehci_hcd [ 667.643988] init: mythtv-backend main process (21774) terminated with status 1 [ 667.644155] init: mythtv-backend main process ended, respawning [ 667.866930] init: mythtv-backend main process (21787) terminated with status 1 [ 667.866958] init: mythtv-backend main process ended, respawning [ 668.088856] init: mythtv-backend main process (21799) terminated with status 1 [ 668.088887] init: mythtv-backend respawning too fast, stopped [ 4101.165120] pool[30185] general protection ip:7f52d254c790 sp:7f52ca15baf8 error:0 in libgobject-2.0.so.0.3200.4[7f52d251b000+4d000]