SILVER FIRE v2.5 3.0

1 oz = 29.5735 ml

OVERVIEW
1) mix the colorant components seperately and set aside
2) mix viscosity + reflective components together using squirrel mixer
3) strain step #2 above using nylon paint strainer (should have consistancy of milk...add water if needed)
4) mix colorant in using squirrel mixer



NOTES
1) i will be using a few different size syringes for measuring my colorant
2) i will be using the "1000ml Electric HVLP Air Spray Gun Kit 600W Motor Paint Sprayer 1.0mm Nozzle DIY" sprayer from amazon
3) you do the mixing / blending at a low to medium speed only....you DO NOT whip the paint so that the surface becomes a mass of air bubbles
4) Sand it after coat 3 with a 'fine' sanding sponge VERY lightly. You use it "Dry" and with a very fine touch...almost no pressure, and if your sanding the entire surface, you use broad, sweeping strokes...about 3 per area and slightly overlap when moving across the surface.


COLORANT COMPONENTS
Distilled or Filtered water (use for rinsing + add it all)	100ml
Liquitex Basics - Napthol Crimson Red				50ml (I have 4-oz / 118ml)
Liquitex Basics - Phthalocyanine Green				25ml (I have 4-oz / 118ml)
Liquitex Basics - UltraMarine Blue				14ml (I have 4-oz / 118ml)
Liquitex Basics - Cadmium Yellow - Deep Hue			10ml (I have 4-oz / 118ml)



VISCOSITY COMPONENT
Rustoleum's Ultimate Polyurethane Matte Finish			16 oz (I have 32oz)
Distilled or Filtered water					24 - 36 oz. 



REFLECTIVE BASE COMPONENTS
Rustoleum Metallic Accents White Pearl				22 oz (I have 32oz)
Rustoleum Metallic Accents Sterling Silver			22 oz (I have 32oz)
Behr 1850 UPW Flat Home Depot					10 oz (I have 32oz)
Liquitex Basics Gold Micheals					02 oz