root@PartedMagic:~# smartctl -a /dev/sde smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-9YN164 Serial Number: S1E0F5DC LU WWN Device Id: 5 000c50 051032016 Firmware Version: CC4B User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 10 10:44:23 2015 UTC ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 225) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 086 085 006 Pre-fail Always - 118700810 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1252 5 Reallocated_Sector_Ct 0x0033 064 064 036 Pre-fail Always - 47904 7 Seek_Error_Rate 0x000f 053 053 030 Pre-fail Always - 4419750482279 9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16781 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 111 183 Runtime_Bad_Block 0x0032 095 095 000 Old_age Always - 5 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1044 188 Command_Timeout 0x0032 097 001 000 Old_age Always - 4 4 281 189 High_Fly_Writes 0x003a 081 081 000 Old_age Always - 19 190 Airflow_Temperature_Cel 0x0022 066 055 045 Old_age Always - 34 (Min/Max 34/35) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 68 193 Load_Cycle_Count 0x0032 072 072 000 Old_age Always - 57676 194 Temperature_Celsius 0x0022 034 045 000 Old_age Always - 34 (0 22 0 0 0) 197 Current_Pending_Sector 0x0012 077 001 000 Old_age Always - 3792 198 Offline_Uncorrectable 0x0010 077 001 000 Old_age Offline - 3792 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 21 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 9354h+17m+52.612s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 215403670480632 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 87350513517955 SMART Error Log Version: 1 ATA Error Count: 999 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 999 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 20 ff ff ff 4f 00 00:03:03.885 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:03:03.885 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:03:03.885 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:03:03.885 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:03:03.885 READ FPDMA QUEUED Error 998 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 01 ff ff ff 4f 00 00:02:09.623 READ FPDMA QUEUED 61 00 02 ff ff ff 4f 00 00:02:09.623 WRITE FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:02:09.623 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:02:09.623 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:02:09.623 READ FPDMA QUEUED Error 997 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 02 ff ff ff 4f 00 00:02:07.457 WRITE FPDMA QUEUED 60 00 08 28 87 d0 48 00 00:02:06.780 READ FPDMA QUEUED 60 00 20 ff ff ff 4f 00 00:02:06.752 READ FPDMA QUEUED 60 00 00 00 72 44 40 00 00:02:06.744 READ FPDMA QUEUED 60 00 01 ff ff ff 4f 00 00:02:06.701 READ FPDMA QUEUED Error 996 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 20 ff ff ff 4f 00 00:02:03.838 READ FPDMA QUEUED 60 00 48 ff ff ff 4f 00 00:02:03.823 READ FPDMA QUEUED 60 00 00 00 71 44 40 00 00:02:03.811 READ FPDMA QUEUED 61 00 08 ff ff ff 4f 00 00:02:03.799 WRITE FPDMA QUEUED 60 00 00 00 70 44 40 00 00:02:03.796 READ FPDMA QUEUED Error 995 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 00 6d 44 40 00 00:02:00.754 READ FPDMA QUEUED 60 00 01 ff ff ff 4f 00 00:02:00.736 READ FPDMA QUEUED 60 00 00 00 6c 44 40 00 00:02:00.727 READ FPDMA QUEUED 60 00 00 00 6b 44 40 00 00:02:00.725 READ FPDMA QUEUED 60 00 00 00 6a 44 40 00 00:02:00.724 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 16781 1285354648 # 2 Short offline Completed: read failure 90% 16780 1285354648 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@PartedMagic:~#