$ bitbake -c testimage core-image-minimal ... Initialising tasks: 100% |#########################################################################################################| Time: 0:00:02 Sstate summary: Wanted 92 Local 60 Mirrors 0 Missed 32 Current 92 (65% match, 82% complete) NOTE: Executing Tasks QMP Available for connection at /home/builder/src/yocto/build_upstream/tmp/.uw9g997i QMP setting timeout to 300 QMP connected to QEMU at 01/25/23 09:50:28 and took 0.5975832939147949 seconds QMP released QEMU at 01/25/23 09:50:28 and took 0.1343228816986084 seconds from connect Test requires ptest-runner to be installed Test requires ptest-runner to be installed Output from runqemu: runqemu - INFO - Cleaning up runqemu - INFO - Host uptime: 946699.07 tput: No value for $TERM and no -T specified RESULTS: RESULTS - date.DateTest.test_date: PASSED (8.86s) RESULTS - df.DfTest.test_df: PASSED (0.80s) RESULTS - parselogs.ParseLogsTest.test_parselogs: PASSED (7.10s) RESULTS - ping.PingTest.test_ping: PASSED (0.04s) RESULTS - ssh.SSHTest.test_ssh: PASSED (1.66s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectfail: SKIPPED (0.00s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectsuccess: SKIPPED (0.00s) SUMMARY: core-image-minimal () - Ran 7 tests in 19.035s core-image-minimal - OK - All required tests passed (successes=5, skipped=2, failures=0, errors=0) NOTE: Tasks Summary: Attempted 845 tasks of which 843 didn't need to be rerun and all succeeded. NOTE: Writing buildhistory NOTE: Writing buildhistory took: 1 seconds Full do_testimage log: DEBUG: Executing python function extend_recipe_sysroot NOTE: Direct dependencies are ['/home/builder/src/poky/meta/recipes-devtools/qemu/qemu-helper-native_1.0.bb:do_populate_sysroot', '/home/builder/src/poky/meta/recipes-devtools/qemu/qemu-native_7.2.0.bb:do_populate_sysroot', '/home/builder/src/poky/meta/recipes-devtools/qemu/qemu-system-native_7.2.0.bb:do_populate_sysroot', 'virtual:native:/home/builder/src/poky/meta/recipes-devtools/opkg-utils/opkg-utils_0.5.0.bb:do_populate_sysroot', 'virtual:native:/home/builder/src/poky/meta/recipes-devtools/opkg/opkg_0.5.0.bb:do_populate_sysroot', 'virtual:native:/home/builder/src/poky/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/home/builder/src/poky/meta/recipes-devtools/unfs3/unfs3_git.bb:do_populate_sysroot'] NOTE: Installed into sysroot: ['qemu-helper-native', 'qemu-native', 'qemu-system-native', 'opkg-utils-native', 'opkg-native', 'pseudo-native', 'unfs3-native', 'perl-native', 'glib-2.0-native', 'zlib-native', 'xz-native', 'flex-native', 'libtool-native', 'libtirpc-native', 'libsolv-native', 'libarchive-native', 'libsdl2-native', 'libepoxy-native', 'virglrenderer-native', 'pixman-native', 'dtc-native', 'alsa-lib-native', 'libslirp-native', 'gdbm-native', 'make-native', 'gettext-native', 'libffi-native', 'python3-native', 'libpcre-native', 'gettext-minimal-native', 'util-linux-native', 'm4-native', 'texinfo-dummy-native', 'cmake-native', 'expat-native', 'lzo-native', 'bzip2-native', 'zstd-native', 'libxext-native', 'mesa-native', 'libx11-native', 'libxrender-native', 'libxrandr-native', 'libdrm-native', 'sqlite3-native', 'readline-native', 'util-linux-libuuid-native', 'libnsl2-native', 'ncurses-native', 'openssl-native', 'libpcre2-native', 'libcap-ng-native', 'gnu-config-native', 'curl-native', 'xorgproto-native', 'util-macros-native', 'chrpath-native', 'wayland-native', 'python3-mako-native', 'libxxf86vm-native', 'libxshmfence-native', 'xrandr-native', 'libxml2-native', 'wayland-protocols-native', 'makedepend-native', 'libxdamage-native', 'libxfixes-native', 'libxcb-native', 'xtrans-native', 'libpthread-stubs-native', 'libpciaccess-native', 'python3-installer-native', 'python3-wheel-native', 'python3-setuptools-native', 'xcb-proto-native', 'libxau-native', 'libxdmcp-native', 'unzip-native', 'python3-flit-core-native'] NOTE: Skipping as already exists in sysroot: [] DEBUG: sed -e 's:^[^/]*/:/home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot-native/:g' /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/qemu-system-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/perl-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/glib-2.0-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/libtool-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/libsdl2-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/gettext-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/python3-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/libpcre-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/ncurses-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/openssl-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/libpcre2-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/gnu-config-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/curl-native/fixmepath /home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/libxml2-native/fixmepath | xargs sed -i -e 's:FIXMESTAGINGDIRTARGET:/home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot:g; s:FIXMESTAGINGDIRHOST:/home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot-native:g' -e 's:FIXME_PSEUDO_SYSROOT:/home/builder/src/yocto/build_upstream/tmp/sysroots-components/x86_64/pseudo-native:g' -e 's:FIXME_HOSTTOOLS_DIR:/home/builder/src/yocto/build_upstream/tmp/hosttools:g' -e 's:FIXME_PKGDATA_DIR:/home/builder/src/yocto/build_upstream/tmp/pkgdata/qemuarm64:g' -e 's:FIXME_PSEUDO_LOCALSTATEDIR:/home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/pseudo/:g' -e 's:FIXME_LOGFIFO:/home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/temp/fifo.3738399:g' DEBUG: Python function extend_recipe_sysroot finished DEBUG: Executing python function do_testimage DEBUG: run_monitor() called: command = query-status, args = None, timeout = 60 DEBUG: run_monitor() called: command = query-block, args = None, timeout = 60 DEBUG: run_monitor() called: command = dump-guest-memory, args = {'paging': False, 'protocol': 'file:/home/builder/src/yocto/build_upstream/tmp/log/runtime-hostdump/qmp_00_dump-guest-memory.img'}, timeout = 60 DEBUG: test suites: test_ping (ping.PingTest) test_ssh (ssh.SSHTest) test_date (date.DateTest) test_df (df.DfTest) test_parselogs (parselogs.ParseLogsTest) test_ptestrunner_expectfail (ptest.PtestRunnerTest) test_ptestrunner_expectsuccess (ptest.PtestRunnerTest) DEBUG: Starting qemu DEBUG: Not using kvm for runqemu QMP Available for connection at /home/builder/src/yocto/build_upstream/tmp/.uw9g997i DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:43577 DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:39571 DEBUG: launchcmd=runqemu snapshot nographic slirp slirp nographic novga qemuarm64 /home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/core-image-minimal-qemuarm64.ext4 tcpserial=43577:39571 bootparams=" printk.time=1" qemuparams="-pidfile /home/builder/src/yocto/build_upstream/pidfile_3738399 -S -qmp unix:./.gofxv6lw,server,wait -qmp unix:./.uw9g997i,server,nowait" DEBUG: runqemu started, pid is 3738573 DEBUG: waiting at most 300 seconds for qemu pid (01/25/23 09:50:27) DEBUG: QMP Initializing to /home/builder/src/yocto/build_upstream/tmp/.gofxv6lw /home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot-native/usr/lib/qemu-python/qmp/legacy.py:82: DeprecationWarning: There is no current event loop self._aloop = asyncio.get_event_loop() DEBUG: QMP Connecting to /home/builder/src/yocto/build_upstream/tmp/.gofxv6lw QMP setting timeout to 300 QMP connected to QEMU at 01/25/23 09:50:28 and took 0.5975832939147949 seconds DEBUG: run_monitor() called: command = cont, args = None, timeout = 60 QMP released QEMU at 01/25/23 09:50:28 and took 0.1343228816986084 seconds from connect DEBUG: Calling read() DEBUG: qemu started in 0.7302885055541992 seconds - qemu procces pid is 3738639 (01/25/23 09:50:28) DEBUG: qemu cmdline used: /home/builder/src/yocto/build_upstream/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-aarch64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:35:02 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:2222-:22 -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive id=disk0,file=/home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/core-image-minimal-qemuarm64.ext4,if=none,format=raw -device virtio-blk-pci,drive=disk0 -device qemu-xhci -device usb-tablet -device usb-kbd -machine virt -cpu cortex-a57 -smp 4 -m 256 -device virtio-serial-pci -chardev socket,id=virtcon,port=43577,host=127.0.0.1 -device virtconsole,chardev=virtcon -serial tcp:127.0.0.1:39571 -pidfile /home/builder/src/yocto/build_upstream/pidfile_3738399 -S -qmp unix:./.gofxv6lw,server,wait -qmp unix:./.uw9g997i,server,nowait -snapshot -serial mon:stdio -nographic -vga none -kernel /home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/Image -append root=/dev/vda rw mem=256M ip=dhcp console=ttyAMA0 console=hvc0 printk.time=1 DEBUG: Target IP: 127.0.0.1:2222 DEBUG: Server IP: None DEBUG: Starting logging thread DEBUG: Starting thread event loop DEBUG: Connection request received DEBUG: Setting connection established event DEBUG: Output from runqemu: runqemu - INFO - Continuing with the following parameters: KERNEL: [/home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/Image] MACHINE: [qemuarm64] FSTYPE: [ext4] ROOTFS: [/home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/core-image-minimal-qemuarm64.ext4] CONFFILE: [/home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/core-image-minimal-qemuarm64.qemuboot.conf] runqemu - INFO - Network configuration: ip=dhcp runqemu - INFO - Port forward: hostfwd=tcp:127.0.0.1:2222-:22 runqemu - INFO - Running /home/builder/src/yocto/build_upstream/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-aarch64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:35:02 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:2222-:22 -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive id=disk0,file=/home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/core-image-minimal-qemuarm64.ext4,if=none,format=raw -device virtio-blk-pci,drive=disk0 -device qemu-xhci -device usb-tablet -device usb-kbd -machine virt -cpu cortex-a57 -smp 4 -m 256 -device virtio-serial-pci -chardev socket,id=virtcon,port=43577,host=127.0.0.1 -device virtconsole,chardev=virtcon -serial tcp:127.0.0.1:39571 -pidfile /home/builder/src/yocto/build_upstream/pidfile_3738399 -S -qmp unix:./.gofxv6lw,server,wait -qmp unix:./.uw9g997i,server,nowait -snapshot -serial mon:stdio -nographic -vga none -kernel /home/builder/src/yocto/build_upstream/tmp/deploy/images/qemuarm64/Image -append 'root=/dev/vda rw mem=256M ip=dhcp console=ttyAMA0 console=hvc0 printk.time=1' runqemu - INFO - Host uptime: 946662.07 QEMU 7.2.0 monitor - type 'help' for more information (qemu) DEBUG: Waiting at most 1000 seconds for login banner (01/25/23 09:50:28) DEBUG: Connection from 127.0.0.1:52342 DEBUG: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd070] [ 0.000000] Linux version 5.15.78-yocto-standard (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Nov 16 14:17:41 UTC 2022 [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] Memory limited to 256MB [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psc DEBUG: i: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 26 pages/cpu s67032 r8192 d31272 u106496 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM erratum 832075 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512 [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=dhcp console=ttyAMA0 console=hvc0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: DEBUG: 233004K/262144K available (11584K kernel code, 1854K rwdata, 2696K rodata, 3648K init, 682K bss, 29140K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35885 entries in 141 pages [ 0.000000] ftrace: allocated 141 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SP DEBUG: I[80:143] [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000119] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns [ 0.010572] Console: colour dummy device 80x25 [ 0.012372] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) [ 0.012602] pid_max: default: 32768 minimum: 301 [ 0.013786] LSM: Security Framework initializing [ 0.014998] landlock: Up and running. [ 0.017527] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.017580] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.054429] /cpus/cpu-map: empty cluster [ 0.067084] rcu: Hierarchical SRCU implementation. [ 0.072688] EFI se DEBUG: rvices will not be available. [ 0.075246] smp: Bringing up secondary CPUs ... [ 0.085464] Detected PIPT I-cache on CPU1 [ 0.088451] CPU1: Booted secondary processor 0x0000000001 [0x411fd070] [ 0.097281] Detected PIPT I-cache on CPU2 [ 0.097852] CPU2: Booted secondary processor 0x0000000002 [0x411fd070] [ 0.101104] Detected PIPT I-cache on CPU3 [ 0.101761] CPU3: Booted secondary processor 0x0000000003 [0x411fd070] [ 0.102780] smp: Brought up 1 node, 4 CPUs [ 0.102917] SMP: Total of 4 processors activated. [ 0.103074] CPU features: detected: 32-bit EL0 Support [ 0.103256] CPU features: detected: CRC32 instructions [ 0.108800] CPU: All CPU(s) started at EL1 [ 0.109334] alternatives: patching kernel code [ 0.133644] devtmpfs: initialized [ 0.156549] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.156986] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.162356] DMI not present o DEBUG: r invalid. [ 0.173064] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.178515] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.178926] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.179078] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.184732] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.185975] ASID allocator initialised with 65536 entries [ 0.186176] Serial: AMBA PL011 UART driver [ 0.223159] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 47, base_baud = 0) is a PL011 rev1 [ 0.237477] printk: console [ttyAMA0] enabled [ 0.382525] raid6: neonx8 gen() 2004 MB/s [ 0.451949] raid6: neonx8 xor() 649 MB/s [ 0.521184] raid6: neonx4 gen() 2189 MB/s [ 0.590434] raid6: neonx4 xor() 808 MB/s [ 0.659743] raid6: neonx2 gen() 1762 MB/s [ 0.729026] raid6: neonx2 xor() 748 MB/s [ 0.798285] raid6: neonx1 gen() 1050 MB/s DEBUG: [ 0.867664] raid6: neonx1 xor() 595 MB/s [ 0.937135] raid6: int64x8 gen() 1343 MB/s DEBUG: [ 1.006446] raid6: int64x8 xor() 955 MB/s [ 1.076374] raid6: int64x4 gen() 1937 MB/s DEBUG: [ 1.145653] raid6: int64x4 xor() 1209 MB/s [ 1.214919] raid6: int64x2 gen() 1669 MB/s DEBUG: [ 1.284209] raid6: int64x2 xor() 295 MB/s [ 1.353573] raid6: int64x1 gen() 1198 MB/s DEBUG: [ 1.422841] raid6: int64x1 xor() 698 MB/s [ 1.423002] raid6: using algorithm neonx4 gen() 2189 MB/s [ 1.423148] raid6: .... xor() 808 MB/s, rmw enabled [ 1.423391] raid6: using neon recovery algorithm [ 1.424906] iommu: Default domain type: Translated [ 1.425111] iommu: DMA domain TLB invalidation policy: strict mode [ 1.426621] vgaarb: loaded [ 1.428532] SCSI subsystem initialized [ 1.429364] usbcore: registered new interface driver usbfs [ 1.429866] usbcore: registered new interface driver hub [ 1.430382] usbcore: registered new device driver usb [ 1.431038] pps_core: LinuxPPS API ver. 1 registered [ 1.431184] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.431512] PTP clock support registered [ 1.448572] clocksource: Switched to clocksource arch_sys_counter DEBUG: [ 1.643779] NET: Registered PF_INET protocol family [ 1.645932] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.654803] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.655104] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.655353] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.655729] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.656336] TCP: Hash tables configured (established 2048 bind 2048) [ 1.657984] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.658424] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.660818] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.665970] RPC: Registered named UNIX socket transport module. [ 1.666209] RPC: Registered udp transport module. [ 1.666343] RPC: Registered tcp transport module. [ 1.666472] RPC: Registered tcp NFSv4.1 backchannel trans DEBUG: port module. [ 1.666863] PCI: CLS 0 bytes, default 64 [ 1.673494] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available DEBUG: [ 4.393031] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 4.416258] NFS: Registering the id_resolver key type [ 4.417815] Key type id_resolver registered [ 4.417970] Key type id_legacy registered [ 4.421712] Key type cifs.idmap registered [ 4.450650] xor: measuring software checksum speed [ 4.455367] 8regs : 2392 MB/sec [ 4.460718] 32regs : 2090 MB/sec [ 4.467817] arm64_neon : 1509 MB/sec [ 4.467982] xor: using function: 8regs (2392 MB/sec) [ 4.468765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 4.469147] io scheduler mq-deadline registered [ 4.469351] io scheduler kyber registered [ 4.473543] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: [ 4.474941] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 4.475840] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 4.476426] pc DEBUG: i-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 [ 4.477327] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits [ 4.478159] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] [ 4.479748] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 [ 4.480328] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.480557] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.480787] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 4.480967] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] [ 4.482845] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 4.487608] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 4.488266] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 4.488481] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 4.488720] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ DEBUG: 4.489075] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.489754] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 4.489936] pci 0000:00:02.0: reg 0x10: [io 0x0000-0x001f] [ 4.490081] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 4.490258] pci 0000:00:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.490856] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 [ 4.491033] pci 0000:00:03.0: reg 0x10: [io 0x0000-0x007f] [ 4.491178] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 4.491354] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.492321] pci 0000:00:04.0: [1b36:000d] type 00 class 0x0c0330 [ 4.492508] pci 0000:00:04.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.493745] pci 0000:00:05.0: [1af4:1003] type 00 class 0x078000 [ 4.493979] pci 0000:00:05.0: reg 0x10: [io 0x0000-0x003f] [ 4.494128] pci 0000:00:05.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 4.494304] pci 0000 DEBUG: :00:05.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.497817] pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] [ 4.498370] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] [ 4.498702] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] [ 4.498967] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref] [ 4.499183] pci 0000:00:04.0: BAR 0: assigned [mem 0x800000c000-0x800000ffff 64bit] [ 4.499382] pci 0000:00:05.0: BAR 4: assigned [mem 0x8000010000-0x8000013fff 64bit pref] [ 4.499627] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] [ 4.499810] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] [ 4.499976] pci 0000:00:03.0: BAR 1: assigned [mem 0x10042000-0x10042fff] [ 4.500386] pci 0000:00:05.0: BAR 1: assigned [mem 0x10043000-0x10043fff] [ 4.500609] pci 0000:00:03.0: BAR 0: assigned [io 0x1000-0x107f] [ 4.500793] pci 0000:00:05.0: BAR 0: DEBUG: assigned [io 0x1080-0x10bf] [ 4.500952] pci 0000:00:01.0: BAR 0: assigned [io 0x10c0-0x10df] [ 4.501103] pci 0000:00:02.0: BAR 0: assigned [io 0x10e0-0x10ff] [ 4.502809] pci 0000:00:04.0: enabling device (0000 -> 0002) [ 4.509842] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) [ 4.513981] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) [ 4.515767] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) [ 4.517722] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) [ 4.568453] printk: console [hvc0] enabled [ 4.569600] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 4.611708] brd: module loaded [ 4.621441] virtio_blk virtio2: [vda] 216828 512-byte logical blocks (111 MB/106 MiB) [ 4.643766] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 4.645138] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 4.651371] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 4.6 DEBUG: 56418] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 4.656823] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 4.657472] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 4.669115] hub 1-0:1.0: USB hub found [ 4.670325] hub 1-0:1.0: 4 ports detected [ 4.677273] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.682664] hub 2-0:1.0: USB hub found [ 4.683901] hub 2-0:1.0: 4 ports detected [ 4.694688] rtc-pl031 9010000.pl031: registered as rtc0 [ 4.695880] rtc-pl031 9010000.pl031: setting system clock to 2023-01-25T09:50:33 UTC (1674640233) [ 4.701891] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 4.706954] usbcore: registered new interface driver usbhid [ 4.707482] usbhid: USB HID core driver [ 4.709101] u32 classifier [ 4.709400] input device check on [ 4.709745] Actions configured [ 4.712872] NET: Registered PF_INET6 protocol family [ 4.7 DEBUG: 24940] Segment Routing with IPv6 [ 4.725461] In-situ OAM (IOAM) with IPv6 [ 4.726776] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.731045] NET: Registered PF_PACKET protocol family [ 4.732702] Bridge firewalling registered [ 4.734242] Key type dns_resolver registered [ 4.735450] NET: Registered PF_VSOCK protocol family [ 4.738856] Key type .fscrypt registered [ 4.739238] Key type fscrypt-provisioning registered [ 4.745399] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 4.780240] Key type encrypted registered [ 4.786135] printk: console [netcon0] enabled [ 4.786655] netconsole: network logging started [ 4.836902] Sending DHCP requests ., OK [ 4.869816] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 [ 4.871730] IP-Config: Complete: [ 4.872674] device=eth0, hwaddr=52:54:00:12:35:02, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 [ 4.873915] host=10.0.2.15, domain=, nis-domain=(none) [ DEBUG: 4.874537] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= [ 4.874652] nameserver0=10.0.2.3 [ 4.889545] md: Waiting for all devices to be available before autodetect [ 4.890128] md: If you don't use raid, use raid=noautodetect [ 4.890661] md: Autodetecting RAID arrays. [ 4.891020] md: autorun ... [ 4.891265] md: ... autorun DONE. [ 4.938193] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 4.939446] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.940748] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 4.943833] devtmpfs: mounted [ 5.077197] Freeing unused kernel memory: 3648K [ 5.078762] Run /sbin/init as init process [ 5.124510] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 5.128542] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00 DEBUG: :04.0-1/input0 [ DEBUG: 5.256428] usb 1-2: new high-speed USB device number 3 using xhci_hcd DEBUG: [ 5.404897] systemd[1]: systemd 250.5+ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 5.411611] systemd[1]: Detected virtualization qemu. [ 5.412763] systemd[1]: Detected architecture arm64. [ 5.427120] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ DEBUG: 5.493713] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 5.505344] systemd[1]: Hostname set to . [ 5.510996] systemd[1]: Initializing machine ID from random generator. DEBUG: [ 5.669537] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DEBUG: [ 6.786371] systemd[1]: Queued start job for default target Multi-User System. DEBUG: [ 6.926939] systemd[1]: Created slice Slice /system/getty. [ 6.937030] systemd[1]: Created slice Slice /system/modprobe. [ 6.943523] systemd[1]: Created slice Slice /system/serial-getty. [ 6.949909] systemd[1]: Created slice User and Session Slice. [ 6.953931] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.957648] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.959663] systemd[1]: Reached target Path Units. [ 6.961627] systemd[1]: Reached target Remote File Systems. [ 6.962778] systemd[1]: Reached target Slice Units. [ 6.963919] systemd[1]: Reached target Swaps. [ 6.970318] systemd[1]: Listening on Syslog Socket. [ 6.973812] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.993450] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). [ 7.000787] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.004751] systemd[1]: Listen DEBUG: ing on Journal Socket. [ 7.007930] systemd[1]: Listening on Network Service Netlink Socket. [ 7.011091] systemd[1]: Listening on udev Control Socket. [ 7.013475] systemd[1]: Listening on udev Kernel Socket. [ 7.015700] systemd[1]: Listening on User Database Manager Socket. [ 7.019893] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 7.041858] systemd[1]: Mounting POSIX Message Queue File System... [ 7.064693] systemd[1]: Mounting Kernel Debug File System... [ 7.080462] systemd[1]: Mounting Kernel Trace File System... [ 7.101452] systemd[1]: Mounting Temporary Directory /tmp... [ 7.104813] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.15.78-yocto-standard/modules.devname). DEBUG: [ 7.121707] systemd[1]: Starting Load Kernel Module configfs... [ 7.138167] systemd[1]: Starting Load Kernel Module drm... [ 7.153447] systemd[1]: Starting Load Kernel Module fuse... [ 7.155525] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 7.189061] systemd[1]: Starting Journal Service... [ 7.199803] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. DEBUG: [ 7.219357] systemd[1]: Starting Generate network units from Kernel command line... [ 7.246619] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.265231] systemd[1]: Starting Apply Kernel Variables... [ 7.281358] systemd[1]: Starting Coldplug All udev Devices... DEBUG: [ 7.336645] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. [ 7.340533] systemd[1]: Mounted POSIX Message Queue File System. [ 7.357484] systemd[1]: Mounted Kernel Debug File System. [ 7.361017] systemd[1]: Mounted Kernel Trace File System. [ 7.363990] systemd[1]: Mounted Temporary Directory /tmp. [ 7.373050] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 7.380585] systemd[1]: Finished Load Kernel Module configfs. [ 7.389368] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 7.398023] systemd[1]: Finished Load Kernel Module drm. [ 7.407656] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 7.414748] systemd[1]: Finished Load Kernel Module fuse. [ 7.422299] systemd[1]: Finished Generate network units from Kernel command line. DEBUG: [ 7.431600] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.439250] systemd[1]: Finished Apply Kernel Variables. [ 7.443814] systemd[1]: Reached target Preparation for Network. [ 7.447104] systemd[1]: FUSE Control File System was skipped because of a failed condition check (ConditionPathExists=/sys/fs/fuse/connections). [ 7.449732] systemd[1]: Kernel Configuration File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/config). [ 7.454024] systemd[1]: Rebuild Hardware Database was skipped because all trigger condition checks failed. [ 7.455416] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 7.471413] systemd[1]: Starting Create System Users... DEBUG: [ 7.639203] systemd[1]: Finished Create System Users. [ 7.656240] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.718128] systemd[1]: Started Journal Service. DEBUG: [ 7.797960] systemd-journald[130]: Received client request to flush runtime journal. DEBUG: Poky (Yocto Project Reference Distro) 4.0.6 qemuarm64 ttyAMA0 qemuarm64 login: /home/builder/src/poky/meta/lib/oeqa/utils/qemurunner.py:479: ResourceWarning: unclosed self.server_socket = qemusock ResourceWarning: Enable tracemalloc to get the object allocation traceback DEBUG: Reached login banner in 14.371430158615112 seconds (01/25/23 09:50:42, 1674640242.7588885) DEBUG: run_serial() called: command = root , raw = True, timeout = 120 DEBUG: Logged as root in serial console DEBUG: Setting timer for TEST_OVERALL_TIMEOUT DEBUG: Timer exception: ValueError DEBUG: Running tests NOTE: test_ping (ping.PingTest) DEBUG: Setting up a 30 second(s) timeout DEBUG: Removed SIGALRM handler NOTE: ... ok NOTE: test_ssh (ssh.SSHTest) DEBUG: Checking if at least one of dropbear, openssh-sshd is installed DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; uname -a', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640246.0331619, endtime: 1674640546.0315485 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: Linux qemuarm64 5.15.78-yocto-standard #1 SMP PREEMPT Wed Nov 16 14:17:41 UTC 2022 aarch64 GNU/Linux DEBUG: Waiting for process output: time: 1674640246.7446175, endtime: 1674640546.7446146 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.92 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /etc/controllerimage', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640246.9492402, endtime: 1674640546.9469934 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: cat: can't open '/etc/controllerimage': No such file or directory DEBUG: Waiting for process output: time: 1674640247.488962, endtime: 1674640547.4889593 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.74 seconds] DEBUG: returning from run() NOTE: ... ok NOTE: test_date (date.DateTest) DEBUG: Checking if at least one of busybox, coreutils is installed DEBUG: Stopping systemd-timesyncd daemon DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; systemctl disable --now --runtime systemd-timesyncd', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640247.6949413, endtime: 1674640547.692633 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 2.57 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; date +"%Y-%m-%d %T"', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640250.2626243, endtime: 1674640550.2603807 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: 2023-01-25 09:50:50 DEBUG: Waiting for process output: time: 1674640250.8128474, endtime: 1674640550.8128445 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.75 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; date -s @1488800000', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640251.0172966, endtime: 1674640551.0152555 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: Mon Mar 6 11:33:20 UTC 2017 DEBUG: Waiting for process output: time: 1674640251.5611906, endtime: 1674640551.5611877 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.75 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; date +"%s"', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640251.7659318, endtime: 1674640551.7635407 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: 1488800000 DEBUG: Waiting for process output: time: 1674640252.311673, endtime: 1674640552.31167 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.75 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; date -s "2023-01-25 09:50:50"', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640252.516848, endtime: 1674640552.5143852 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: Wed Jan 25 09:50:50 UTC 2023 DEBUG: Waiting for process output: time: 1674640253.0451202, endtime: 1674640553.0451176 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.73 seconds] DEBUG: returning from run() DEBUG: Starting systemd-timesyncd daemon DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; systemctl enable --now --runtime systemd-timesyncd', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640253.2496924, endtime: 1674640553.2481554 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: Created symlink /run/systemd/system/dbus-org.freedesktop.timesync1.service → /lib/systemd/system/systemd-timesyncd.service. Created symlink /run/systemd/system/sysinit.target.wants/systemd-timesyncd.service → /lib/systemd/system/systemd-timesyncd.service. DEBUG: Waiting for process output: time: 1674640253.8345683, endtime: 1674640553.8345652 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 3.30 seconds] DEBUG: returning from run() NOTE: ... ok NOTE: test_df (df.DfTest) DEBUG: Checking if 'IMAGE_FEATURES' value contains 'read-only-rootfs' to skip the test DEBUG: Checking if at least one of busybox, coreutils is installed DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; df -P / | sed -n '2p' | awk '{print $4}'', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640256.5539198, endtime: 1674640556.5513954 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: 15600 DEBUG: Waiting for process output: time: 1674640257.1454031, endtime: 1674640557.1454 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.80 seconds] DEBUG: returning from run() NOTE: ... ok DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; which LSB_Test.sh', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640257.3505974, endtime: 1674640557.3483818 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.57 seconds] DEBUG: returning from run() NOTE: test_parselogs (parselogs.ParseLogsTest) DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; dmesg > /tmp/dmesg_output.log', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640257.9247768, endtime: 1674640557.922932 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.56 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /var/log/', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640258.4860399, endtime: 1674640558.4837508 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.54 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -d /var/log/', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640259.024179, endtime: 1674640559.02221 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.55 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; find /var/log//*.log -maxdepth 1 -type f', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640259.5749612, endtime: 1674640559.5726237 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: find: /var/log//*.log: No such file or directory DEBUG: Waiting for process output: time: 1674640260.1037104, endtime: 1674640560.1037076 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.73 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /var/log/dmesg', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640260.3082798, endtime: 1674640560.3060288 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.53 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -d /var/log/dmesg', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640260.842153, endtime: 1674640560.839865 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '1' after 0.55 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /tmp/dmesg_output.log', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640261.3963401, endtime: 1674640561.3939872 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.54 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'scp -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -P 2222 root@127.0.0.1:/tmp/dmesg_output.log /home/builder/src/yocto/build_upstream/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0-r0/target_logs', timeout=None, ignore_status=False DEBUG: run DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.43 seconds] DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "model name" | head -n1 | awk 'BEGIN{FS=":"}{print $2}'', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640262.3920043, endtime: 1674640562.3897443 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.57 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "cpu cores" | head -n1 | awk {'print $4'}', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640262.9654968, endtime: 1674640562.9633112 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.55 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "processor" | wc -l', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640263.5180109, endtime: 1674640563.5157437 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: 4 DEBUG: Waiting for process output: time: 1674640264.0806377, endtime: 1674640564.0806348 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.77 seconds] DEBUG: returning from run() DEBUG: [Running]$ 'ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR -p 2222 127.0.0.1 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; uname -m', timeout=300, ignore_status=True DEBUG: run DEBUG: Waiting for process output: time: 1674640264.285168, endtime: 1674640564.2829573 DEBUG: Reading from process stdout DEBUG: Partial data from SSH call: aarch64 DEBUG: Waiting for process output: time: 1674640264.818322, endtime: 1674640564.818319 DEBUG: Reading from process stdout DEBUG: End of file from process stdout DEBUG: Closing process stdout DEBUG: Process still running, waiting for it to end DEBUG: [Command returned '0' after 0.74 seconds] DEBUG: returning from run() NOTE: ... ok NOTE: test_ptestrunner_expectfail (ptest.PtestRunnerTest) DEBUG: Checking if at least one of ptest-runner is installed NOTE: ... skipped 'Test requires ptest-runner to be installed' Test requires ptest-runner to be installed NOTE: test_ptestrunner_expectsuccess (ptest.PtestRunnerTest) DEBUG: Checking if at least one of ptest-runner is installed NOTE: ... skipped 'Test requires ptest-runner to be installed' Test requires ptest-runner to be installed NOTE: ---------------------------------------------------------------------- NOTE: Ran 7 tests in 19.034s NOTE: OK NOTE: (skipped=2) DEBUG: Resetting SIGTERM handler DEBUG: Stopping qemu target DEBUG: Stopping QemuRunner DEBUG: Stopping thread DEBUG: Stopping logging thread DEBUG: Stop event received DEBUG: Tearing down logging thread DEBUG: Stopping qemu system DEBUG: stop_qemu_system: self.qemupid = 3738639 DEBUG: sending SIGTERM to 3738639 DEBUG: sending SIGKILL to 3738639 DEBUG: qemu-system already dead DEBUG: Sending SIGKILL to monitorpid DEBUG: Sending SIGTERM to runqemu DEBUG: Calling read() Output from runqemu: runqemu - INFO - Cleaning up runqemu - INFO - Host uptime: 946699.07 tput: No value for $TERM and no -T specified DEBUG: Closing QMP DEBUG: Closing server socket DEBUG: Closing threadsock DEBUG: Closing monitorpipe RESULTS: RESULTS - date.DateTest.test_date: PASSED (8.86s) RESULTS - df.DfTest.test_df: PASSED (0.80s) RESULTS - parselogs.ParseLogsTest.test_parselogs: PASSED (7.10s) RESULTS - ping.PingTest.test_ping: PASSED (0.04s) RESULTS - ssh.SSHTest.test_ssh: PASSED (1.66s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectfail: SKIPPED (0.00s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectsuccess: SKIPPED (0.00s) SUMMARY: core-image-minimal () - Ran 7 tests in 19.035s core-image-minimal - OK - All required tests passed (successes=5, skipped=2, failures=0, errors=0) DEBUG: Python function do_testimage finished DEBUG: Executing python function write_ptest_result DEBUG: Python function write_ptest_result finished