CoreELEC (official): nightly_20200103 (Amlogic-ng.arm) CoreELEC:~ # dmesg [ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.113 (relkai@hammbwcor01) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Sat Jan 4 03:20:29 CET 2020 [ 0.000000@0] Boot CPU: AArch64 Processor [411fd050] [ 0.000000@0] Machine model: Amlogic S905X3 [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000ed800000, size 128 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000eb000000, size 40 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000eb000000, size 0 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d7c00000, size 308 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d5c00000, size 32 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool [ 0.000000@0] cma: Reserved 8 MiB at 0x00000000d5400000 [ 0.000000@0] On node 0 totalpages: 1005312 [ 0.000000@0] DMA zone: 15708 pages used for memmap [ 0.000000@0] DMA zone: 0 pages reserved [ 0.000000@0] DMA zone: 1005312 pages, LIFO batch:31 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 22 pages/cpu @ffffffc0d5330000 s51992 r8192 d29928 u90112 [ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989604 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 mac=90:0e:b3:10:db:5b androidboot.mac=90:0e:b3:10:db:5b androidboot.rpmb_state=1 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend enable_wol=1 hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto [ 0.000000@0] fb: osd0 [ 0.000000@0] fb: loaded [ 0.000000@0] fb: 0x3d800000 [ 0.000000@0] vout: 1080p60hz [ 0.000000@0] vout: enable: 1 [ 0.000000@0] lcd: panel_type: lcd_1 [ 0.000000@0] vout: get hdmimode: 1080p60hz [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1 [ 0.000000@0] vout: get cvbsmode: 576cvbs [ 0.000000@0] vpp_axis_reverse: bootargs is 0 [ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0. [ 0.000000@0] phlock_phase_config: bootargs is 0. [ 0.000000@0] jtag: jtag select disable [ 0.000000@0] init_wol_state, enable_wol=1 [ 0.000000@0] vout: get hdmimode: 1080p60hz [ 0.000000@0] fb: osd0 [ 0.000000@0] fb: loaded [ 0.000000@0] fb: 0x3d800000 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Memory: 3377916K/4021248K available (10620K kernel code, 1574K rwdata, 8488K rodata, 4224K init, 1382K bss, 102660K reserved, 540672K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009ae0000 ( 10624 KB) [ 0.000000@0] .rodata : 0xffffff8009ae0000 - 0xffffff800a330000 ( 8512 KB) [ 0.000000@0] .init : 0xffffff800a330000 - 0xffffff800a750000 ( 4224 KB) [ 0.000000@0] .data : 0xffffff800a750000 - 0xffffff800a8d9a00 ( 1575 KB) [ 0.000000@0] .bss : 0xffffff800a8d9a00 - 0xffffff800aa3343c ( 1383 KB) [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf03d60000 ( 61 MB actual) [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc0f5800000 ( 3927 MB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] g12a_aoclkc_init: register ao clk ok! [ 0.000000@0] Meson chip version = RevC (2B:C - 10:0) [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk [ 0.000000@0] meson_g12a_media_init: register meson media clk [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks [ 0.000000@0] meson_g12a_misc_init: done. [ 0.000000@0] g12a_clkc_init initialization complete [ 0.000000@0] sm1 clk probe ok [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000033@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194 [ 0.000596@0] Console: colour dummy device 80x25 [ 0.000623@0] console [tty0] enabled [ 0.000637@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000648@0] pid_max: default: 32768 minimum: 301 [ 0.000742@0] Security Framework initialized [ 0.000749@0] SELinux: Initializing. [ 0.000790@0] SELinux: Starting in permissive mode [ 0.000824@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000829@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001513@0] ftrace: allocating 35740 entries in 140 pages [ 0.074783@0] sched-energy: CPU device node has no sched-energy-costs [ 0.074791@0] CPU0: update cpu_capacity 1024 [ 0.074802@0] ASID allocator initialised with 65536 entries [ 0.117678@0] secmon: can't fine clear_range [ 0.117808@0] EFI services will not be available. [ 0.163204@1] Detected VIPT I-cache on CPU1 [ 0.163255@1] CPU1: update cpu_capacity 1024 [ 0.163257@1] CPU1: Booted secondary processor [411fd050] [ 0.195261@2] Detected VIPT I-cache on CPU2 [ 0.195295@2] CPU2: update cpu_capacity 1024 [ 0.195297@2] CPU2: Booted secondary processor [411fd050] [ 0.227355@3] Detected VIPT I-cache on CPU3 [ 0.227387@3] CPU3: update cpu_capacity 1024 [ 0.227390@3] CPU3: Booted secondary processor [411fd050] [ 0.227478@0] Brought up 4 CPUs [ 0.227483@0] SMP: Total of 4 processors activated. [ 0.227487@0] CPU features: detected feature: Privileged Access Never [ 0.227491@0] CPU features: detected feature: User Access Override [ 0.227493@0] CPU features: detected feature: Virtualization Host Extensions [ 0.227495@0] CPU features: detected feature: 32-bit EL0 Support [ 0.227648@0] CPU: All CPU(s) started at EL2 [ 0.227665@0] alternatives: patching kernel code [ 0.229600@0] devtmpfs: initialized [ 0.248641@0] DMI not present or invalid. [ 0.248969@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.248981@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.249171@0] pinctrl core: initialized pinctrl subsystem [ 0.250072@0] NET: Registered protocol family 16 [ 0.251911@2] schedtune: init normalization constants... [ 0.251914@2] schedtune: no energy model data [ 0.251916@2] schedtune: disabled! [ 0.267399@2] cpuidle: using governor menu [ 0.267488@2] register canvas platform driver [ 0.267518@2] register rdma platform driver [ 0.267552@2] aml_vdac_init: module init [ 0.269333@2] vdso: 2 pages (1 code @ ffffff8009ae7000, 1 data @ ffffff800a755000) [ 0.269344@2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.269784@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.269963@2] clkmsr: clkmsr: driver init [ 0.269966@2] codec_mm_module_init [ 0.270013@2] media_configs_system_init [ 0.270450@2] pstore: using zlib compression [ 0.270487@2] console [pstore-1] enabled [ 0.270491@2] pstore: Registered ramoops as persistent store backend [ 0.270496@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0 [ 0.272109@2] aml_iomap: amlogic iomap probe done [ 0.272525@2] vpu: driver version: v20190314(10-sm1) [ 0.272531@2] vpu: load vpu_clk: 666666667Hz(7) [ 0.272754@2] vpu: clktree_init [ 0.272808@2] vpu: vpu_probe OK [ 0.276231@2] clkmsr: msr_clk_reg0=ffffff80081bc004,msr_clk_reg2=ffffff80081be00c [ 0.276240@2] clkmsr: msr_ring_reg0=ffffff80081c05fc [ 0.280344@2] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac [ 0.280513@2] aml_vdac_probe: ok [ 0.280643@2] canvas_probe reg=00000000ff638000,size=2000 [ 0.280658@2] canvas maped reg_base =ffffff80081c2000 [ 0.286462@2] rdma_probe,cpu_type:1, ver:0, len:8 [ 0.286649@2] rdma_register, rdma_table_addr ffffff80081e5000 rdma_table_addr_phy d5440000 reg_buf ffffffc0cfc68000 [ 0.286653@2] rdma_register success, handle 1 table_size 32768 [ 0.286657@2] set_rdma_handle video rdma handle = 1. [ 0.287682@2] aml_snd_reg_map[0], reg:ff661000, size:400 [ 0.287696@2] aml_snd_reg_map[1], reg:ff660000, size:1000 [ 0.287708@2] aml_snd_reg_map[2], reg:ff661400, size:400 [ 0.287720@2] aml_snd_reg_map[3], reg:ff662000, size:1000 [ 0.287729@2] aml_snd_reg_map[4], reg:ffd01000, size:1000 [ 0.287739@2] aml_snd_reg_map[5], reg:ff661800, size:400 [ 0.287750@2] aml_snd_reg_map[6], reg:ff663800, size:30 [ 0.287759@2] aml_snd_reg_map[7], reg:ff663c00, size:20 [ 0.287768@2] aml_snd_reg_map[8], reg:ff663e00, size:10 [ 0.287771@2] amlogic auge_snd_iomap probe done [ 0.289165@2] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout [ 0.289179@2] cvbs_out: clk path:0 [ 0.289181@2] cvbs_out: error: failed to get vdac_config [ 0.289370@2] vout: vout1: register server: cvbs_vout_server [ 0.289372@2] cvbs_out: register cvbs module server ok [ 0.289376@2] vout: vout2: register server: cvbs_vout2_server [ 0.289379@2] cvbs_out: register cvbs module vout2 server ok [ 0.289384@2] cvbs_out: chrdev devno 264241152 for disp [ 0.289586@2] cvbs_out: create cdev cvbs [ 0.289589@2] cvbs_out: cvbsout_probe OK [ 0.289966@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.290049@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.290053@2] codec_mm_probe ok [ 0.449374@2] SCSI subsystem initialized [ 0.449639@2] usbcore: registered new interface driver usbfs [ 0.449689@2] usbcore: registered new interface driver hub [ 0.449782@2] usbcore: registered new device driver usb [ 0.449928@2] pps_core: LinuxPPS API ver. 1 registered [ 0.449931@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.449957@2] PTP clock support registered [ 0.450107@2] dmi: Firmware registration failed. [ 0.450474@2] secmon: reserve_mem_size:0x300000 [ 0.450563@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.450794@2] secmon: get page:ffffffbf00140000, 5000 [ 0.450801@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.450803@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.451709@2] hdmitx: system: amhdmitx_probe start [ 0.451714@2] hdmitx: system: Ver: 20190624 [ 0.451745@2] hdmitx: system: hdmitx_device.chip_type : 12 [ 0.451784@2] hdmitx: system: not find match pwr-ctl [ 0.451838@2] hdmitx: system: not find drm_amhdmitx [ 0.451859@2] hdmitx: system: hpd irq = 32 [ 0.451972@2] hdmitx: system: hdcp22_tx_skp failed to probe [ 0.451976@2] hdmitx: system: hdcp22_tx_esm failed to probe [ 0.452447@2] vout: vout1: register server: hdmitx_vout_server [ 0.452453@2] vout: vout2: register server: hdmitx_vout2_server [ 0.452980@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.452994@2] hdmitx: hdmitx20: Mapped PHY: 0xff634400 [ 0.453002@2] hdmitx: hdmitx20: Mapped PHY: 0xff900000 [ 0.453014@2] hdmitx: hdmitx20: Mapped PHY: 0xff800000 [ 0.453022@2] hdmitx: hdmitx20: Mapped PHY: 0xff63c000 [ 0.453025@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.453030@2] hdmitx: hdmitx20: Mapped PHY: 0xff608000 [ 0.453034@2] hdmitx: hdmitx20: Mapped PHY: 0xff600000 [ 0.453042@2] hdmitx: hdmitx20: Mapped PHY: 0xffe01000 [ 0.453050@2] hdmitx: hw: alread display in uboot 0x10 [ 0.453076@2] hdmitx: hw: avmute set to 1 [ 0.453159@2] hdmitx: system: amhdmitx_probe end [ 0.453555@0] hdmitx: system: irq 80000002 0 [ 0.453779@2] lcd: driver version: 20181012(8-sm1) [ 0.453895@2] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0 [ 0.454167@2] lcd: lcd_clktree_probe [ 0.454172@2] lcd: status: 0 [ 0.454179@2] vout: vout1: register server: lcd_vout_server [ 0.454184@2] vout: vout2: register server: lcd_vout2_server [ 0.454188@2] lcd: lcd_get_config from dts [ 0.454197@2] lcd: no range_setting [ 0.454242@2] lcd: P070ACB_FT, mipi, 8bit, 600x1024 [ 0.454254@2] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz [ 0.454498@2] lcd: lcd_fops_create OK [ 0.454536@2] lcd: request lcd_vsync_irq successful [ 0.454561@2] lcd: request lcd_vsync2_irq successful [ 0.454564@2] lcd: lcd_probe ok [ 0.454935@2] vout: create vout attribute OK [ 0.455060@2] vout: vout_fops_create OK [ 0.455064@2] vout: vout1: register server: nulldisp_vout_server [ 0.455154@2] vout: tvout monitor interval:500(ms), timeout cnt:20 [ 0.455174@2] hdmitx: hdmitx_set_current_vmode[3772] [ 0.455177@2] hdmitx: system: recalc before 1080p60hz 60 1 [ 0.455182@2] hdmitx: system: recalc after 1080p60hz 2997 50 [ 0.455184@2] hdmitx: alread display in uboot [ 0.455186@2] vout: init mode 1080p60hz set ok [ 0.455189@2] vout: aml_tvout_mode_monitor [ 0.455199@2] vout: aml_vout_probe OK [ 0.455476@2] chip type:0x2b [ 0.455801@2] NO valid ramdump args:0 0 [ 0.456822@1] Advanced Linux Sound Architecture Driver Initialized. [ 0.458317@1] NetLabel: Initializing [ 0.458325@1] NetLabel: domain hash size = 128 [ 0.458327@1] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.458394@1] NetLabel: unlabeled traffic allowed by default [ 0.461460@1] clocksource: Switched to clocksource arch_sys_counter [ 0.518825@1] VFS: Disk quotas dquot_6.6.0 [ 0.518951@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.531850@0] jtag: module init [ 0.532379@0] jtag: ao gpios not specified [ 0.532443@0] jtag: probe of jtag failed with error -22 [ 0.533045@0] NET: Registered protocol family 2 [ 0.533942@0] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.534130@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.534950@0] TCP: Hash tables configured (established 32768 bind 32768) [ 0.535079@0] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.535131@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.535438@0] NET: Registered protocol family 1 [ 0.538330@0] wifi: power_on_pin_OD = 0; [ 0.538349@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2 [ 0.538627@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok [ 0.538649@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok [ 0.538655@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup [ 0.538659@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9 [ 0.539037@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok [ 0.539046@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483 [ 0.539051@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1 [ 0.539055@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482 [ 0.539058@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0 [ 0.539391@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt [ 0.539543@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(64) [ 0.539548@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483) [ 0.539570@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482) [ 0.539824@0] Unpacking initramfs... [ 0.562110@0] Freeing initrd memory: 4708K [ 0.564889@0] hw perfevents: clusterb_enabled = 0 [ 0.564898@0] hw perfevents: cpumasks 0xf, 0x0 [ 0.564954@0] hw perfevents: cluster A irq = 10 [ 0.565085@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.569204@3] audit: initializing netlink subsys (disabled) [ 0.569352@3] audit: type=2000 audit(0.508:1): initialized [ 0.570484@0] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.579952@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580178@0] Registering sdcardfs 0.1 [ 0.581208@3] SELinux: Registering netfilter hooks [ 0.586228@0] NET: Registered protocol family 38 [ 0.586256@0] Key type asymmetric registered [ 0.586260@0] Asymmetric key parser 'x509' registered [ 0.586631@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.586642@0] io scheduler noop registered (default) [ 0.586647@0] io scheduler deadline registered [ 0.586870@0] io scheduler cfq registered [ 0.591169@1] random: fast init done [ 0.591230@1] random: crng init done [ 0.591378@0] [drm] Initialized [ 0.591519@0] Unable to detect cache hierarchy for CPU 0 [ 0.598627@1] loop: module loaded [ 0.599326@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.600344@1] libphy: Fixed MDIO Bus: probed [ 0.601546@1] REG0:Addr = ffffff8008411540 [ 0.601564@1] ee eth reset:Addr = ffffff8008413008 [ 0.601576@1] auto_cali_idx 0 [ 0.602461@1] meson6-dwmac ff3f0000.ethernet: no reset control found [ 0.602470@1] stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 0.602474@1] Ring mode enabled [ 0.602479@1] DMA HW capability register supported [ 0.602483@1] Normal descriptors [ 0.602485@1] RX Checksum Offload Engine supported [ 0.602487@1] COE Type 2 [ 0.602489@1] TX Checksum insertion supported [ 0.602490@1] Wake-Up On Lan supported [ 0.602548@1] Enable RX Mitigation via HW Watchdog Timer [ 0.606036@0] libphy: stmmac: probed [ 0.606048@0] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.606052@0] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.609231@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.609239@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.610056@0] usbcore: registered new interface driver cdc_acm [ 0.610061@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.610162@0] usbcore: registered new interface driver usb-storage [ 0.610334@0] usbcore: registered new interface driver usbserial [ 0.610397@0] usbcore: registered new interface driver usbserial_generic [ 0.610456@0] usbserial: USB Serial support registered for generic [ 0.611090@3] mousedev: PS/2 mouse device common for all mice [ 0.611738@3] i2c /dev entries driver [ 0.615182@0] ledtrig-cpu: registered to indicate activity on CPUs [ 0.615943@0] hidraw: raw HID events driver (C) Jiri Kosina [ 0.616513@3] usbcore: registered new interface driver usbhid [ 0.616518@3] usbhid: USB HID core driver [ 0.618553@3] value of voltage_tolerance 0 [ 0.618561@3] meson_cpufreq_init:don't find the node [ 0.618607@3] value of gp1_clk_target 0 [ 0.620115@3] cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.622129@3] ff803000.serial: clock gate not found [ 0.622264@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008417000 [ 0.622333@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 17, base_baud = 1500000) is a meson_uart [ 0.622359@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 0.660384@3] console [ttyS0] enabled [ 0.661732@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008419000 [ 0.661827@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 31, base_baud = 1500000) is a meson_uart [ 0.665204@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff800841b000 [ 0.666302@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff8008439080 [ 0.669292@0] aml_dma ff63e000.aml_dma: Aml dma [ 0.671231@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 0.672523@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 0.672994@0] gpio-keypad ff800000.gpio_keypad: power key(116) registed. [ 0.673163@0] input: gpio_keypad as /devices/platform/ff800000.gpio_keypad/input/input0 [ 0.673626@3] meson-remote: Driver init [ 0.674017@3] meson-remote: IR XMP protocol handler initialized [ 0.676912@3] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev [ 0.677777@1] ge2d: ge2d_init_module [ 0.678205@1] ge2d: ge2d_dev major:237 [ 0.678725@0] ge2d: clock source clk_ge2d_gate ffffffc0cf14e2c0 [ 0.678784@0] ge2d: clock clk_ge2d source ffffffc0cf14e1c0 [ 0.678810@0] ge2d: clock source clk_vapb_0 ffffffc0cf145cc0 [ 0.678816@0] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ [ 0.679053@0] ge2d: ge2d clock is 499 MHZ [ 0.679076@0] ge2d: find address resource [ 0.679103@0] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff80084b0000 [ 0.679108@0] ge2d: reserved mem init failed [ 0.679111@0] ge2d: ge2d: pdev=ffffffc0cfe62800, irq=20, clk=ffffffc0cf14e2c0 [ 0.679197@0] ge2d: ge2d start monitor [ 0.679309@0] ge2d: ge2d workqueue monitor start [ 0.679902@3] [tsync_pcr_init]init success. [ 0.680349@3] amvideom vsync irq: 36 [ 0.681317@0] create_ge2d_work_queue video task ok [ 0.682046@0] amvideocap_probe,amvideocap [ 0.682112@0] use cma buf. [ 0.683403@0] fb: osd_init_module [ 0.683951@0] fb: viu vsync irq: 36 [ 0.683961@0] fb: viu2 vsync irq: 44 [ 0.684172@0] 0x000000db:Y=db,U=0,V=0 [ 0.684174@0] 0x000000dc:Y=dc,U=0,V=0 [ 0.684176@0] 0x000000dd:Y=dd,U=0,V=0 [ 0.684178@0] 0x000000de:Y=de,U=0,V=0 [ 0.684179@0] 0x000000df:Y=df,U=0,V=0 [ 0.684181@0] 0x000000e0:Y=e0,U=0,V=0 [ 0.684790@0] fb: osd_rdma_init: rdma_table p=0xd5448000,op=0xd5448000 , v=0xffffff80084a8000 [ 0.684968@0] rdma_register, rdma_table_addr ffffff80084aa000 rdma_table_addr_phy d5449000 reg_buf ffffffc0cff83000 [ 0.684971@0] rdma_register success, handle 2 table_size 4096 [ 0.684975@0] fb: osd_rdma_init:osd rdma handle = 2. [ 0.685000@0] fb: mem_size: 0x800000 [ 0.685001@0] fb: mem_size: 0x4b80000 [ 0.685002@0] fb: mem_size: 0x100000 [ 0.685003@0] fb: mem_size: 0x100000 [ 0.685004@0] fb: mem_size: 0x800000 [ 0.685215@0] meson-fb fb: assigned reserved memory node linux,meson-fb [ 0.685219@0] fb: reserved memory base:0x0000000077800000, size:800000 [ 0.986223@0] hdmitx: system: plugin [ 1.117738@0] hdmitx: edid: EDID Parser: [ 1.117752@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117754@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117755@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117784@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117785@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117787@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117789@0] hdmitx: hdmitx: reach vesa idx MAX [ 1.117831@0] hdmitx: edid: get dtd0 vic: 3 [ 1.117839@0] hdmitx: hdmitx: get PMT vic: 16 [ 1.117843@0] hdmitx: edid: find IEEEOUT [ 1.117872@0] hdmitx: edid: check sum valid [ 1.117873@0] hdmitx: edid: check sum valid [ 1.117882@0] hdmitx: edid: update rx hdr info 0 at edid parsing [ 1.117884@0] hdmitx: edid: check sum valid [ 1.117885@0] hdmitx: edid: check sum valid [ 1.117892@0] hdmitx: edid: blk0 raw data [ 1.117912@0] hdmitx: edid: [ 1.117912@0] 00ffffffffffff0005e360228e000000321a010380301b782ae8b5a5564c9d23 [ 1.117912@0] 115054bfef00d1c0b30095008180814081c001010101023a801871382d40582c [ 1.117912@0] 4500dd0c1100001e000000fd00324c1e5311000a202020202020000000fc0032 [ 1.117912@0] 3236305747350a2020202020000000ff004b42454743314130303031343201a0 [ 1.117912@0] [ 1.117912@0] [ 1.117917@0] hdmitx: edid: blk1 raw data [ 1.117935@0] hdmitx: edid: [ 1.117935@0] 02031ef14b101f051404130312021101230907078301000065030c0010008c0a [ 1.117935@0] d08a20e02d10103e9600dd0c11000018011d007251d01e206e285500dd0c1100 [ 1.117935@0] 001e8c0ad08a20e02d10103e9600dd0c110000188c0ad090204031200c405500 [ 1.117935@0] dd0c110000180000000000000000000000000000000000000000000000000045 [ 1.117935@0] [ 1.117935@0] [ 1.117942@0] hdmitx: system: update physcial size: 480 270 [ 1.117955@0] hdmitx: system: get current mode: 1080p60hz [ 1.117958@0] hdmitx: system: update rx hdr info 0 [ 1.117960@0] hdmitx: system: update physcial size: 480 270 [ 1.117993@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 1.117997@0] hdmitx: hw: set audio [ 1.118003@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0, hdev->aud_output_ch = 0 [ 1.118018@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148352 [ 1.118022@0] hdmitx: hw: aud_n_para = 5824 [ 1.118030@0] hdmitx: hw: set channel status [ 1.219231@3] fb: fb def : 1920 1080 1920 2160 32 [ 1.219241@3] fb: init fbdev bpp is:32 [ 1.222895@2] clear:ec400000, free:ec400000, tick:738829 us [ 1.231956@0] fb: osd[0] enable: 1 (swapper/0) [ 1.250529@0] fb: set osd0 reverse as NONE [ 1.264982@0] fb: osd probe OK [ 1.265222@0] hdmitx: hdcp: hdmitx_hdcp_init [ 1.266169@0] vout: vout2: create vout2 attribute OK [ 1.266275@0] vout: vout2: vout2_fops_create OK [ 1.266471@0] vout: vout2: clktree_init [ 1.266475@0] vout: vout2: register server: nulldisp_vout2_server [ 1.266563@0] vout: vout2: init mode null set ok [ 1.266566@0] vout: vout2: aml_vout2_probe OK [ 1.266690@0] DI: di_module_init ok. [ 1.266695@0] DI: di_module_init: major 510 [ 1.267498@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma [ 1.267503@0] di:flag_cma=1 [ 1.267506@0] DI: CMA size 0x2800000. [ 1.267523@0] pre_irq:52 [ 1.267528@0] post_irq:53 [ 1.267531@0] DI: di_probe allocate rdma channel 0. [ 1.267535@0] di_get_vpu_clkb: get clk vpu error. [ 1.267572@0] DI: vpu clkb <334000000, 667000000> [ 1.267612@0] get clkb rate:333333328 [ 1.267619@0] DI:enable vpu clkb. [ 1.267629@0] 0x000000e1:Y=e1,U=0,V=0 [ 1.267631@0] 0x000000e2:Y=e2,U=0,V=0 [ 1.267632@0] 0x000000e3:Y=e3,U=0,V=0 [ 1.267635@0] 0x000000f0:Y=f0,U=0,V=0 [ 1.267636@0] 0x000000f1:Y=f1,U=0,V=0 [ 1.267638@0] 0x000000f2:Y=f2,U=0,V=0 [ 1.267641@0] 0x000000f3:Y=f3,U=0,V=0 [ 1.267642@0] 0x000000f4:Y=f4,U=0,V=0 [ 1.267643@0] 0x000000f5:Y=f5,U=0,V=0 [ 1.267644@0] 0x000000f6:Y=f6,U=0,V=0 [ 1.267648@0] 0x000000f7:Y=f7,U=0,V=0 [ 1.267650@0] 0x000000f8:Y=f8,U=0,V=0 [ 1.267651@0] 0x000000f9:Y=f9,U=0,V=0 [ 1.267652@0] 0x000000fa:Y=fa,U=0,V=0 [ 1.267654@0] 0x000000fb:Y=fb,U=0,V=0 [ 1.267655@0] 0x000000fc:Y=fc,U=0,V=0 [ 1.267659@0] 0x000000fd:Y=fd,U=0,V=0 [ 1.267660@0] 0x000000fe:Y=fe,U=0,V=0 [ 1.267661@0] 0x000000ff:Y=ff,U=0,V=0 [ 1.267662@0] 0x0000003a:Y=3a,U=0,V=0 [ 1.267664@0] 0x0000003b:Y=3b,U=0,V=0 [ 1.267665@0] 0x0000003c:Y=3c,U=0,V=0 [ 1.267668@0] 0x0000003d:Y=3d,U=0,V=0 [ 1.267669@0] 0x0000003e:Y=3e,U=0,V=0 [ 1.267671@0] 0x0000003f:Y=3f,U=0,V=0 [ 1.267673@0] DI: support multi decoding 61~62~63. [ 1.267804@0] DI: di_probe:Di use HRTIMER [ 1.267895@0] di_probe:ok [ 1.267993@0] vdin_drv_init: major 509 [ 1.268204@0] vdin_drv_init: vdin driver init done [ 1.268206@0] [viuin..]viuin_init_module viuin module init [ 1.268434@0] [viuin..]viuin_probe probe ok. [ 1.268920@0] [RX]-hdmirx: hdmirx_init. [ 1.268923@0] ESM HLD: Initializing... [ 1.269034@0] tvin_afe: tvafe_drv_init: major 507 [ 1.269359@0] tvin_afe: tvafe_drv_init. [ 1.269547@0] tvafe_vbi: vbi: vbi_init. [ 1.269742@0] PPMGRDRV: warn: ppmgr module init func called [ 1.269847@0] PPMGRDRV: info: ppmgr_driver_probe called [ 1.269914@0] Reserved memory: failed to init DMA memory pool at 0x00000000eb000000, size 0 MiB [ 1.275304@0] PPMGRDRV: info: ppmgr_dev major:505 [ 1.275644@0] picdec: picdec_driver_probe called. [ 1.275836@0] picdec: probe of picdec failed with error -22 [ 1.276007@0] videosync_create_instance dev_s ffffffc0c30a4000,dev_s->dev ffffffc0c303f780 [ 1.276009@0] videosync_create_instance reg videosync.0 [ 1.276155@0] aml_vecm_init:module init [ 1.276159@1] videosync_thread started [ 1.276313@0] [ 1.276313@0] VECM probe start [ 1.276504@0] vlock_status_init vlock_en:0 [ 1.276526@0] Can't find wb_sel. [ 1.276528@0] hdr:Can't find cfg_en_osd_100. [ 1.276531@0] amlogic, vecm [ 1.276534@0] vlock dt support: 1 [ 1.276535@0] vlock dt new_fsm: 0 [ 1.276537@0] vlock dt hwver: 0 [ 1.276538@0] vlock dt phlock_en: 0 [ 1.276541@0] Can't find vlock_en. [ 1.276542@0] Can't find vlock_mode. [ 1.276543@0] Can't find vlock_pll_m_limit. [ 1.276546@0] Can't find vlock_line_limit. [ 1.276555@0] param_config vlock_en:0 [ 1.276576@0] aml_vecm_probe: ok [ 1.276624@0] amdolby_vision_init:module init [ 1.276912@0] [ 1.276912@0] amdolby_vision probe start & ver: 20181220 [ 1.276918@0] [ 1.276918@0] cpu_id=2 tvmode=0 [ 1.277027@0] dolby_vision_init_receiver(dvel) [ 1.277030@0] dolby_vision_init_receiver: dvel [ 1.277245@0] amdolby_vision_probe: ok [ 1.277850@0] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 1.279170@0] meson-mmc: >>>>>>>>hostbase ffffff80084dc000, dmode [ 1.281911@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.281914@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 1.321469@0] meson-mmc: meson_mmc_probe() : success! [ 1.335521@0] meson-mmc: >>>>>>>>hostbase ffffff80084e5000, dmode [ 1.336172@0] meson-mmc: gpio_cd = 1ca [ 1.373468@1] meson-mmc: meson_mmc_probe() : success! [ 1.376073@1] meson-mmc: >>>>>>>>hostbase ffffff80084ee000, dmode [ 1.376984@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.376987@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 1.413464@1] meson-mmc: meson_mmc_probe() : success! [ 1.413727@1] amlogic mtd driver init [ 1.414453@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 1.415155@1] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status [ 1.415155@1] [ 1.420371@2] cectx ff80023c.aocec: compatible:amlogic, aocec-sm1 [ 1.426046@2] cectx ff80023c.aocec: cecb_ver:0x2 [ 1.430630@2] cectx ff80023c.aocec: line_reg:0x1 [ 1.435219@2] cectx ff80023c.aocec: line_bit:0x3 [ 1.439817@2] cectx ff80023c.aocec: ee_to_ao:0x1 [ 1.444542@2] input: cec_input as /devices/virtual/input/input1 [ 1.444667@2] cectx ff80023c.aocec: not find 'port_num' [ 1.449616@2] cectx ff80023c.aocec: using cec:0 [ 1.454132@2] cectx ff80023c.aocec: no hdmirx regs [ 1.458878@2] cectx ff80023c.aocec: no hhi regs [ 1.463387@2] cectx ff80023c.aocec: not find 'output' [ 1.471541@2] cectx ff80023c.aocec: irq cnt:2 [ 1.472946@2] cectx ff80023c.aocec: wakeup_reason:0x0 [ 1.477850@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0 [ 1.483321@2] cectx ff80023c.aocec: aml_cec_probe success end [ 1.489372@2] unifykey: storage in base: 0xffffffc005000000 [ 1.489374@2] unifykey: storage out base: 0xffffffc005040000 [ 1.489375@2] unifykey: storage block base: 0xffffffc005080000 [ 1.489377@2] unifykey: probe done! [ 1.489791@2] unifykey: no efuse-version set, use default value: -1 [ 1.489795@2] unifykey: key unify config unifykey-num is 17 [ 1.489841@2] unifykey: key unify fact unifykey-num is 17 [ 1.489850@2] unifykey: unifykey_devno: 1f300000 [ 1.490020@2] unifykey: device unifykeys created ok [ 1.490075@2] unifykey: aml_unifykeys_init done! [ 1.490261@2] meson ts init [ 1.490316@2] tsensor id: 0 [ 1.490535@2] tsensor trim info: 0xfa00001a! [ 1.490537@2] tsensor hireboot: 0xc0ff2a70 [ 1.490601@2] meson ts init [ 1.490626@2] tsensor id: 1 [ 1.490765@2] tsensor trim info: 0xfa000072! [ 1.490767@2] tsensor hireboot: 0xc0ff2a30 [ 1.490851@2] audio_dsp: [dsp]register dsp to char divece(257) [ 1.491005@2] amaudio: amaudio: driver amaudio init! [ 1.491304@2] amaudio: amaudio_init - amaudio: driver amaudio succuess! [ 1.491864@2] sysled: module init [ 1.492136@2] meson_wdt ffd0f0d0.watchdog: start watchdog [ 1.492140@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 1.492338@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 1.492881@2] amlogic rfkill init [ 1.492996@2] enter bt_probe of_node [ 1.493018@2] not get gpio_en [ 1.493023@2] power on valid level is high [ 1.493027@2] bt: power_on_pin_OD = 0; [ 1.493029@2] bt: power_off_flag = 1; [ 1.493031@2] dis power down = 0; [ 1.514966@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 1.514971@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 1.514974@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 1.514978@0] meson-mmc: Data 1 aligned delay is 0 [ 1.514981@0] meson-mmc: emmc: clk 199999997 tuning start [ 1.517631@2] BLASTER Driver Init [ 1.518000@2] irblaster: probe [ 1.518678@2] dmc_monitor_probe [ 1.519172@2] defendkey ff630218.defendkey: Reserved memory is not enough! [ 1.519401@0] meson-mmc: emmc: rx_tuning_result[0] = 40 [ 1.520420@2] defendkey: probe of ff630218.defendkey failed with error -22 [ 1.520813@2] bl301_manager: driver init [ 1.520815@2] bl301_manager: IR remote wake-up code: 0xffffffff [ 1.520817@2] bl301_manager: IR remote wake-up code mask: 0xffffffff [ 1.520819@2] bl301_manager: IR remote wake-up code protocol: 0x0 [ 1.520820@2] bl301_manager: enable 5V system power on suspend/power off state: 0 [ 1.521597@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 1.523795@0] meson-mmc: emmc: rx_tuning_result[2] = 40 [ 1.526033@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 1.528311@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 1.528315@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5 [ 1.528317@0] meson-mmc: emmc: clk 199999997 tuning start [ 1.532937@0] meson-mmc: emmc: rx_tuning_result[0] = 40 [ 1.535232@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 1.537525@0] meson-mmc: emmc: rx_tuning_result[2] = 40 [ 1.539506@2] usbcore: registered new interface driver snd-usb-audio [ 1.539854@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 1.540774@2] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe [ 1.540791@2] T9015 acodec used by auge, tdmout:1 [ 1.542011@2] Error: Driver 'spdif-dit' is already registered, aborting... [ 1.542165@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 1.542168@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5 [ 1.542170@0] meson-mmc: emmc: clk 199999997 tuning start [ 1.543597@2] asoc debug: aml_audio_controller_probe-127 [ 1.545244@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 2 [ 1.545265@2] snd_tdm ff660000.audiobus:tdm@0: lane_mask_out = 1, lane_oe_mask_out = 0 [ 1.545315@2] snd_tdm ff660000.audiobus:tdm@0: neither mclk_pad nor mclk2pad set [ 1.545405@2] aml_tdm_platform_probe(), share en = 1 [ 1.545407@2] No channel mask node Channel_Mask [ 1.545640@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 8 [ 1.545713@2] TDM id 1 samesource_sel:3 [ 1.545723@2] snd_tdm ff660000.audiobus:tdm@1: lane_mask_out = 1, lane_oe_mask_out = 0 [ 1.545960@2] TDM id 1 output clk enable:1 [ 1.545982@2] aml_tdm_platform_probe(), share en = 1 [ 1.545986@2] No channel mask node Channel_Mask [ 1.545993@2] TDM id 1 tuning clk enable:1 [ 1.546121@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 1.546137@2] snd_tdm ff660000.audiobus:tdm@2: lane_mask_out = 1, lane_oe_mask_out = 0 [ 1.546271@2] aml_tdm_platform_probe(), share en = 1 [ 1.546273@2] No channel mask node Channel_Mask [ 1.546358@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 1.546369@2] TDM id 2 i2s2hdmi:1 [ 1.546374@2] snd_tdm ff660000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0 [ 1.546406@2] snd_tdm ff660000.audiobus:i2s2hdmi: aml_tdm_get_pins error! [ 1.546408@2] aml_tdm_platform_probe(), share en = 1 [ 1.546409@2] No channel mask node Channel_Mask [ 1.546613@0] meson-mmc: emmc: rx_tuning_result[0] = 40 [ 1.546970@2] aml_spdif_platform_probe, spdif ID = 0 [ 1.547257@2] SPDIF id 0 asrc_id:0 auto_asrc:0 [ 1.547331@2] Spdif id 0 tuning clk enable:1 [ 1.547334@2] spdifout_play_with_zerodata, spdif id:0 enable:0 [ 1.547338@2] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 1.547343@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 1.547349@2] hdmitx: audio: aout notify format CT_PCM [ 1.547351@2] hdmitx: hw: set audio [ 1.547353@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.547366@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 1.547368@2] hdmitx: hw: aud_n_para = 5824 [ 1.547375@2] hdmitx: hw: set channel status [ 1.547404@2] hdmitx: audio: Audio Type: PCM [ 1.547406@2] hdmitx: audio: set audio param [ 1.547409@2] spdif_a is set to enable [ 1.547422@2] aml_spdif_platform_probe, register soc platform [ 1.547455@2] aml_spdif_platform_probe, spdif ID = 1 [ 1.547514@2] spdifout_play_with_zerodata, spdif id:1 enable:0 [ 1.547518@2] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 1.547521@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 1.547527@2] spdif_b is set to enable [ 1.547534@2] aml_spdif_platform_probe, register soc platform [ 1.548102@2] meson-g12a-pinctrl pinctrl@ff634480: pin GPIOZ_2 already requested by ff3f0000.ethernet; cannot claim for ff660000.audiobus:pdm [ 1.548977@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 1.551175@0] meson-mmc: emmc: rx_tuning_result[2] = 40 [ 1.553371@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 1.555566@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 1.555570@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5 [ 1.555572@0] meson-mmc: emmc: clk 199999997 tuning start [ 1.555938@2] meson-g12a-pinctrl pinctrl@ff634480: pin-3 (ff660000.audiobus:pdm) status -22 [ 1.559973@0] meson-mmc: emmc: rx_tuning_result[0] = 40 [ 1.562166@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 1.564254@2] meson-g12a-pinctrl pinctrl@ff634480: could not request pin 3 (GPIOZ_2) from group pdm_din0_z on device pinctrl-meson [ 1.564362@0] meson-mmc: emmc: rx_tuning_result[2] = 40 [ 1.566582@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 1.568778@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 1.568781@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5 [ 1.568784@0] meson-mmc: emmc: clk 199999997 tuning start [ 1.571041@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 1.573238@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 1.575434@0] meson-mmc: emmc: rx_tuning_result[2] = 40 [ 1.577638@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 1.579848@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 1.579851@0] meson-mmc: emmc: best_win_start =1, best_win_size =4 [ 1.579855@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000 [ 1.580454@0] emmc: new HS200 MMC card at address 0001 [ 1.583244@2] emmc: clock 199999997, 8-bit-bus-width [ 1.583244@2] [ 1.583244@2] snd_pdm ff660000.audiobus:pdm: Error applying setting, reverse things back [ 1.584881@0] mmcblk0: emmc:0001 DF4032 29.1 GiB [ 1.585038@0] mmcblk0boot0: emmc:0001 DF4032 partition 1 4.00 MiB [ 1.585182@0] mmcblk0boot1: emmc:0001 DF4032 partition 2 4.00 MiB [ 1.585312@0] mmcblk0rpmb: emmc:0001 DF4032 partition 3 4.00 MiB [ 1.587515@0] meson-mmc: Enter aml_emmc_partition_ops [ 1.588677@0] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK! [ 1.588678@0] meson-mmc: add_emmc_partition [ 1.588830@0] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 1.588929@0] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 1.589022@0] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000 [ 1.589122@0] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000 [ 1.589218@0] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000 [ 1.589316@0] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000 [ 1.589418@0] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000 [ 1.589661@0] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000 [ 1.589764@0] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000 [ 1.589858@0] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000 [ 1.589957@0] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000 [ 1.590056@0] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000 [ 1.590167@0] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000 [ 1.590264@0] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000 [ 1.590354@0] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000 [ 1.590448@0] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000046000000 [ 1.590545@0] meson-mmc: [mmcblk0p17] odm offset 0x0000a3e00000, size 0x000008000000 [ 1.590643@0] meson-mmc: [mmcblk0p18] system offset 0x0000ac600000, size 0x000050000000 [ 1.590740@0] meson-mmc: [mmcblk0p19] product offset 0x0000fce00000, size 0x000008000000 [ 1.590837@0] meson-mmc: [mmcblk0p20] data offset 0x000105600000, size 0x000642600000 [ 1.590851@0] card key: card_blk_probe. [ 1.590855@0] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220 [ 1.590859@0] emmc key: emmc_key_init:205 ok. [ 1.591317@2] meson-mmc: amlmmc_dtb_init: register dtb chardev [ 1.591318@2] snd_pdm ff660000.audiobus:pdm: Can't get pdm pinmux [ 1.592995@0] meson-mmc: calc f7d4000, store f7d4000 [ 1.595037@0] meson-mmc: calc f7d4000, store f7d4000 [ 1.595038@0] meson-mmc: total valid 2 [ 1.595260@0] meson-mmc: amlmmc_dtb_init: register dtb chardev OK [ 1.595260@0] meson-mmc: Exit aml_emmc_partition_ops OK. [ 1.597867@2] audio_ddr_mngr: 0, irqs toddr 18, frddr 22 [ 1.597870@2] audio_ddr_mngr: 1, irqs toddr 19, frddr 23 [ 1.597872@2] audio_ddr_mngr: 2, irqs toddr 20, frddr 24 [ 1.597873@2] audio_ddr_mngr: 3, irqs toddr 21, frddr 25 [ 1.598282@2] datain_src:4, datain_chnum:2, datain_chumask:3 [ 1.598284@2] datalb_src:1, datalb_chnum:2, datalb_chmask:3 [ 1.598286@2] datain_lane_mask:0x1, datalb_lane_mask:0x1 [ 1.598288@2] datalb_format: 1, chmask for lanes: 0x3 [ 1.598614@2] loopback_platform_probe, p_loopback->id:0 register soc platform [ 1.598994@2] audiolocker_platform_probe [ 1.599593@2] effect_platform_probe, line:565 [ 1.599710@2] eqdrc_clk_set, src pll:399999993, clk:199999997 [ 1.599714@2] effect_platform_probe module:1, lane_mask:1, ch_mask:3 [ 1.600441@2] vad_platform_probe vad data source sel:4, level:1 [ 1.600583@2] input: vad_keypad as /devices/platform/soc/ff660000.audiobus/ff660000.audiobus:vad/input/input2 [ 1.600955@2] Register vad [ 1.601315@2] EARC ff660000.audiobus:earc: Check whether support eARC TX [ 1.604046@2] EARC ff660000.audiobus:earc: Check whether support eARC TX [ 1.610696@2] EARC ff660000.audiobus:earc: Check whether support eARC TX [ 1.617372@2] EARC ff660000.audiobus:earc: Check whether support eARC TX [ 1.624063@2] EARC ff660000.audiobus:earc: platform get irq tx_cmdc failed, Check whether support eARC TX [ 1.633576@2] EARC ff660000.audiobus:earc: platform get irq tx_dmac failed, Check whether support eARC TX [ 1.643116@2] earc_platform_probe, register soc platform [ 1.849879@2] aml_dai_spdif_probe [ 1.849894@2] aml_dai_spdif_probe [ 1.849909@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 1.852028@2] snd_tdm ff660000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16 [ 1.859753@2] aml_dai_tdm_probe, failed add snd tdm controls [ 1.865386@2] aml_dai_set_spdif_fmt , fmt 0x4000 [ 1.865486@2] aml_spdif_new spdif_b, clk continuous:1 [ 1.865489@2] spdifout_play_with_zerodata_free, spdif id:1 [ 1.866327@2] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok [ 1.866336@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.866340@2] lanes_out_cnt(1), lanes_in_cnt(1) [ 1.866341@2] lanes_lb_cnt(0) [ 1.866344@2] slots(2), slot_width(32) [ 1.866345@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.866362@2] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc0c312d218, id(1), clksel(1) [ 1.866370@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.867414@2] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok [ 1.867424@2] aml_dai_set_spdif_fmt , fmt 0x4000 [ 1.867539@2] aml_spdif_new spdif_a, clk continuous:1 [ 1.867542@2] spdifout_play_with_zerodata_free, spdif id:0 [ 1.868397@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok [ 1.868407@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.868408@2] lanes_out_cnt(4), lanes_in_cnt(0) [ 1.868411@2] lanes_lb_cnt(0) [ 1.868413@2] slots(2), slot_width(32) [ 1.868415@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.868427@2] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc0c3156018, id(2), clksel(2) [ 1.868432@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.869413@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 1.871321@0] snd_card_add_kcontrols card:ffffffc0cfd4f818 [ 1.871405@0] eq/drc v1 function enable [ 1.871411@0] no node audio_effect for eq/drc info! [ 1.871412@0] Failed to add audio effects v1 controls [ 1.871567@0] Netfilter messages via NETLINK v0.30. [ 1.871663@0] Initializing XFRM netlink socket [ 1.871679@0] NET: Registered protocol family 17 [ 1.871705@0] Key type dns_resolver registered [ 1.872820@0] Registered swp emulation handler [ 1.872830@0] Registered cp15_barrier emulation handler [ 1.872836@0] Registered setend emulation handler [ 1.873299@0] registered taskstats version 1 [ 1.880404@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 1.883115@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.883135@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.883695@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010 [ 1.883748@0] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000 [ 1.883873@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.883879@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.883884@0] usb usb1: Product: xHCI Host Controller [ 1.883886@0] usb usb1: Manufacturer: Linux 4.9.113 xhci-hcd [ 1.883888@0] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.884333@0] hub 1-0:1.0: USB hub found [ 1.884356@0] hub 1-0:1.0: 2 ports detected [ 1.884643@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.884654@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.884725@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.884805@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.884811@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.884814@0] usb usb2: Product: xHCI Host Controller [ 1.884817@0] usb usb2: Manufacturer: Linux 4.9.113 xhci-hcd [ 1.884819@0] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.885176@0] hub 2-0:1.0: USB hub found [ 1.885195@0] hub 2-0:1.0: 1 port detected [ 1.885702@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:11 UTC (1420070411) [ 1.885991@0] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0cfd79000) [ 1.886016@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 1.886034@0] dwc_otg ff400000.dwc2_a: base=0xffffff8008b40000 [ 1.886036@0] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0c323e400 [ 1.986256@0] dwc_otg: Core Release: 3.30a [ 1.986260@0] dwc_otg: Setting default values for core params [ 1.986269@0] dwc_otg: curmode: 0, host_only: 0 [ 1.986286@0] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT [ 1.998498@0] dwc_otg: Using Buffer DMA mode [ 1.998504@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.998507@0] dwc_otg: Working on port type = SLAVE [ 1.998511@0] dwc_otg: Dedicated Tx FIFOs mode [ 2.000201@0] lcd extern: key_valid: 0 [ 2.000205@0] lcd extern: lcd_extern_get_config from dts [ 2.000214@0] lcd extern: error: failed to get extern_5 [ 2.000249@0] lcd extern: aml_lcd_extern_probe ok [ 2.001114@0] bl: chip type/name: (8-sm1) [ 2.001117@0] bl: key_valid: 0 [ 2.001118@0] bl: aml_bl_config_load from dts [ 2.001123@0] bl: load: backlight_0 [ 2.001129@0] bl error: failed to get bl_power_attr [ 2.001173@0] bl: bl pwm_port: PWM_F(5) [ 2.001177@0] bl: name = backlight_pwm [ 2.001178@0] bl: method = pwm(1) [ 2.001239@0] bl: register pwm_ch(5) 0xffffffc0cff74b40 [ 2.001242@0] bl: aml_bl_pwm_channel_register ok [ 2.001508@0] bl: probe OK [ 2.002726@0] meson_cdev probe [ 2.002735@0] thermal: read gpupp failed [ 2.004394@0] meson_cdev index: 0 [ 2.004512@0] thermal: read gpupp failed [ 2.008315@0] meson_cdev index: 1 [ 2.008323@0] cpucore_cooling_register, max_cpu_core_num:4 [ 2.008494@0] meson_cdev index: 2 [ 2.008499@0] thermal: read gpupp failed [ 2.012159@0] meson_cdev index: 3 [ 2.012230@0] find tzd id: 0 [ 2.012355@0] find tzd id: 0 [ 2.012393@0] meson_cdev probe done [ 2.012887@0] gxbb_pm: enter meson_pm_probe! [ 2.012913@0] gxbb_pm: meson_pm_probe done [ 2.013624@0] ALSA device list: [ 2.013629@0] #0: AML-AUGESOUND [ 2.014754@0] Freeing unused kernel memory: 4224K [ 2.053260@0] fb: malloc_osd_memory, cma:ffffff800a994748 [ 2.053267@0] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608 [ 2.053288@0] fb: use ion buffer for fb memory, fb_index=0 [ 2.053291@0] fb: OSD0 as afbcd mode,afbc_type=2 [ 2.071461@0] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0c32a8800 [ 2.071470@0] meson-fb fb: ion memory(0): created fb at 0x00000000ed800000, size 75 MiB [ 2.071474@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K [ 2.071474@0] [ 2.071476@0] fb: Frame buffer memory assigned at [ 2.071479@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K [ 2.071479@0] [ 2.071481@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K [ 2.071481@0] [ 2.071484@0] fb: logo_index=0,fb_index=0 [ 2.071486@0] fb: ---------------clear fb0 memory ffffff800aa39000 [ 2.084940@0] fb: osd[0] canvas.idx =0x40 [ 2.084942@0] fb: osd[0] canvas.addr=0xed800000 [ 2.084945@0] fb: osd[0] canvas.width=7680 [ 2.084946@0] fb: osd[0] canvas.height=2160 [ 2.084948@0] fb: osd[0] frame.width=1920 [ 2.084950@0] fb: osd[0] frame.height=1080 [ 2.084951@0] fb: osd[0] out_addr_id =0x1 [ 2.099435@0] fb: osd_release now.index=0,open_count=1 [ 2.101206@0] fb: malloc_osd_memory, cma:ffffff800a994748 [ 2.101212@0] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608 [ 2.101214@0] fb: use ion buffer for fb memory, fb_index=1 [ 2.101216@0] fb: OSD1 as afbcd mode,afbc_type=2 [ 2.101661@0] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0c32a8b40 [ 2.101666@0] meson-fb fb: ion memory(1): created fb at 0x00000000f2400000, size 1 MiB [ 2.101671@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K [ 2.101671@0] [ 2.101673@0] fb: Frame buffer memory assigned at [ 2.101676@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K [ 2.101676@0] [ 2.101679@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K [ 2.101679@0] [ 2.101682@0] fb: logo_index=0,fb_index=1 [ 2.101684@0] fb: ---------------clear fb1 memory ffffff8008cf5000 [ 2.101862@0] fb: osd[1] canvas.idx =0x43 [ 2.101863@0] fb: osd[1] canvas.addr=0xf2400000 [ 2.101865@0] fb: osd[1] canvas.width=128 [ 2.101866@0] fb: osd[1] canvas.height=32 [ 2.101868@0] fb: osd[1] frame.width=32 [ 2.101869@0] fb: osd[1] frame.height=32 [ 2.101871@0] fb: osd[1] out_addr_id =0x2 [ 2.116089@0] fb: osd_release now.index=1,open_count=1 [ 2.132818@0] vfm_map_store:rm default [ 2.132818@0] [ 2.132878@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 2.132878@0] [ 2.132958@0] fb: osd[0] enable: 1 (sh) [ 2.149301@0] fb: osd[1] enable: 0 (sh) [ 2.182588@3] Console: switching to colour frame buffer device 240x67 [ 2.203367@3] Checking disk(s): LABEL=COREELEC LABEL=STORAGE [ 2.209483@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.365210@0] usb 1-1: New USB device found, idVendor=0951, idProduct=1603 [ 2.365217@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.365219@0] usb 1-1: Product: DataTraveler 2.0 [ 2.365222@0] usb 1-1: Manufacturer: Kingston [ 2.365224@0] usb 1-1: SerialNumber: 89900000000000000000019C [ 2.366869@0] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2.367217@0] scsi host0: usb-storage 1-1:1.0 [ 2.629473@0] usb 1-2: new low-speed USB device number 3 using xhci-hcd [ 2.774215@0] usb 1-2: New USB device found, idVendor=413c, idProduct=2106 [ 2.774218@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.774223@0] usb 1-2: Product: Dell QuietKey Keyboard [ 2.774225@0] usb 1-2: Manufacturer: DELL [ 2.784384@0] input: DELL Dell QuietKey Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:413C:2106.0001/input/input3 [ 2.842100@0] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-xhci-hcd.0.auto-2/input0 [ 3.386943@1] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 3.387897@2] sd 0:0:0:0: [sda] 1965056 512-byte logical blocks: (1.01 GB/960 MiB) [ 3.388105@1] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.388140@2] sd 0:0:0:0: [sda] Write Protect is off [ 3.388145@2] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 3.388385@2] sd 0:0:0:0: [sda] No Caching mode page found [ 3.388389@2] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.390718@2] sda: sda1 sda2 [ 3.392025@2] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.322235@3] fsck: CP437: Invalid argument [ 5.322342@3] fsck: STORAGE: recovering journal [ 5.322457@3] fsck: fsck.fat 3.0.28 (2015-05-16) [ 5.322581@3] fsck: /dev/sda1: 29 files, 25866/65501 clusters [ 5.322732@3] fsck: STORAGE: Superblock last mount time (Thu Apr 11 16:29:06 2019, [ 5.322863@3] fsck: now = Thu Jan 1 00:00:14 2015) is in the future. [ 5.322927@3] fsck: FIXED. [ 5.323081@3] fsck: STORAGE: 896/114688 files (1.6% non-contiguous), 57851/454144 blocks [ 5.787426@2] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 5.805617@2] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.894900@0] ### BIG FAT WARNING [ 5.894947@0] ### sda2 is removable. suspend/resume may not work [ 5.899494@0] ### BIG FAT WARNING [ 5.899541@0] ### sda1 is removable. suspend/resume may not work [ 6.310669@0] systemd[1]: System time before build time, advancing clock. [ 6.344707@0] cgroup: cgroup2: unknown option "nsdelegate" [ 6.350685@0] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 6.351240@0] systemd[1]: Detected architecture arm64. [ 6.357547@0] systemd[1]: Set hostname to . [ 6.407160@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.407172@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.455352@1] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 6.455405@1] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 6.486040@1] systemd[1]: Listening on udev Control Socket. [ 6.489996@1] systemd[1]: Starting Show Version... [ 6.490389@1] systemd[1]: Listening on udev Kernel Socket. [ 6.519020@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 6.615542@0] kernel-overlays-setup: setup base modules [ 6.752207@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.113 [ 6.796681@0] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 6.796830@0] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 6.797832@0] kernel-overlays-setup: done [ 7.100565@3] media: Linux media interface: v0.10 [ 7.129891@0] Linux video capture interface: v2.00 [ 7.173814@1] amlvid:info: amlvideo_init called [ 7.173821@1] amlvid:info: amlvideo_create_instance called [ 7.173827@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 7.174013@1] amlvideo-000: V4L2 device registered as video10 [ 7.174016@1] amlvid:info: amlvideo_create_instance called [ 7.174019@1] amlvid:info: v4l2_dev.name=:amlvideo-001 [ 7.174133@1] amlvideo-001: V4L2 device registered as video23 [ 7.176170@3] systemd-journald[2191]: Received request to flush runtime journal from PID 1 [ 7.198591@1] media_clock: loading out-of-tree module taints kernel. [ 7.199846@1] register clk_set_setting cpu[43] [ 7.201055@3] Registered firmware driver success. [ 7.201901@3] Try to load video/h264_enc.bin ... [ 7.201957@3] load firmware size : 76288, Name : video/h264_enc.bin. [ 7.201966@3] the fw pack ver v0.0 is too lower. [ 7.201968@3] it may work abnormally so need to be update in time. [ 7.202633@3] Try to load video/video_ucode.bin ... [ 7.203487@3] load firmware size : 1816576, Name : video/video_ucode.bin. [ 7.203493@3] the fw pack ver v0.2 is too lower. [ 7.203495@3] it may work abnormally so need to be update in time. [ 7.228977@3] Amlogic A/V streaming port init [ 7.231204@3] get gate demux control ok ffffffc0ce357e40 [ 7.231226@3] get gate parser_top control ok ffffffc0ce357ec0 [ 7.231254@3] get gate vdec control ok ffffffc0ce357f40 [ 7.231286@3] get gate clk_81 control ok ffffffc0ce357fc0 [ 7.231331@3] get gate clk_vdec_mux control ok ffffffc0cdd88040 [ 7.231374@3] get gate clk_hcodec_mux control ok ffffffc0cdd880c0 [ 7.231423@3] get gate clk_hevc_mux control ok ffffffc0cdd88140 [ 7.231476@3] get gate clk_hevcb_mux control ok ffffffc0cdd881c0 [ 7.231498@3] get gate ahbarb0 control ok ffffffc0cdd88240 [ 7.231505@3] get gate asyncfifo control failed (null) [ 7.267764@2] amvdec_avs module init [ 7.270369@2] amvdec_h264 module init [ 7.408358@0] amvdec_h265 module init [ 7.413353@0] ammvdec_h264 module init [ 7.622631@0] ammvdec_mpeg12 module init [ 7.625258@0] ammvdec_mpeg4_driver_init_module [ 7.647786@2] decoder registered as /dev/video26 [ 7.654455@2] amvdec_vc1 module init [ 7.658148@2] amvdec_vp9 module init [ 7.663720@2] amvenc_avc_probe -- reserved memory config fail. [ 7.663728@2] amvenc_avc - cma memory pool size: 60 MB [ 7.663750@2] encode_wq_init. [ 7.663755@2] encode start monitor. [ 7.663880@2] encode workqueue monitor start. [ 7.667850@3] vpu_init [ 7.668087@3] vpu_probe [ 7.668091@3] HevcEnc reserved memory config fail. [ 7.668093@3] HevcEnc - cma memory pool size: 64 MB [ 7.668121@3] HevcEnc - wave420l_irq: 42 [ 7.668190@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff800f97c000 [ 7.668451@3] success to probe vpu device with video memory from cma [ 7.668843@0] NET: Registered protocol family 10 [ 7.674096@3] Triggered SDIO WiFi power on and bus rescan. [ 7.674121@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482 [ 7.997504@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482 [ 8.314770@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 8.314777@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 8.315822@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 8.315826@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 8.320373@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 8.320379@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 8.321282@3] meson-aml-mmc ffe03000.sdio: card claims to support voltages below defined range [ 8.324023@3] meson-mmc: actual_clock :0, HHI_nand: 0x80 [ 8.324028@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 8.341535@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 8.341543@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 8.361096@3] meson-aml-mmc ffe03000.sdio: divider requested rate 170000000 != actual rate 166666664: ret=0 [ 8.361104@3] meson-mmc: actual_clock :166666664, HHI_nand: 0x80 [ 8.361106@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000246 [ 8.361110@3] meson-mmc: Data 1 aligned delay is 0 [ 8.361113@3] meson-mmc: sdio: clk 166666664 tuning start [ 8.361978@3] meson-mmc: sdio: rx_tuning_result[0] = 40 [ 8.362792@3] meson-mmc: sdio: rx_tuning_result[1] = 40 [ 8.363629@3] meson-mmc: sdio: rx_tuning_result[2] = 40 [ 8.363654@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 8.363679@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 8.364466@3] meson-mmc: sdio: rx_tuning_result[5] = 40 [ 8.364469@3] meson-mmc: sdio: best_win_start =5, best_win_size =4 [ 8.364471@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000246,sd_emmc_regs->gadjust=0x12000 [ 8.365412@3] sdio: new ultra high speed SDR104 SDIO card at address 0001 [ 8.365416@0] sdio: clock 166666664, 4-bit-bus-width [ 8.365416@0] [ 8.366338@0] meson-mmc: [sdio_reinit] finish [ 8.619487@0] fb: osd_release now.index=0,open_count=1 [ 8.619541@0] Console: switching to colour dummy device 80x25 [ 9.016887@1] Registered IR keymap rc-empty [ 9.017312@1] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input4 [ 9.017620@1] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0 [ 9.046743@3] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x110011 [ 9.046757@3] meson-ir ff808040.meson-ir: receiver initialized [ 9.054829@3] lirc_dev: IR Remote Control driver registered, major 491 [ 9.064619@3] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 9.064628@3] IR LIRC bridge handler initialized [ 9.152923@3] mali ffe40000.bifrost: Continuing without Mali regulator control [ 9.153060@3] mali ffe40000.bifrost: max pp is 2 [ 9.153063@3] mali ffe40000.bifrost: set min pp to default 1 [ 9.153066@3] mali ffe40000.bifrost: min pp is 1 [ 9.153068@3] mali ffe40000.bifrost: set min clk default to 0 [ 9.153071@3] mali ffe40000.bifrost: min clk is 0 [ 9.153088@3] mali ffe40000.bifrost: hiu io source 0xffffff800fa71000 [ 9.153094@3] mali ffe40000.bifrost: hiu io source 0xffffff800fa73000 [ 9.153097@3] mali ffe40000.bifrost: num of pp used most of time 1 [ 9.153099@3] mali ffe40000.bifrost: clock dvfs cfg table size is 6 [ 9.164072@3] mali ffe40000.bifrost: max clk set 4 [ 9.164080@3] mali ffe40000.bifrost: max clk is 4 [ 9.164083@3] mali ffe40000.bifrost: turbo clk set to 5 [ 9.164085@3] mali ffe40000.bifrost: turbo clk is 5 [ 9.164087@3] mali ffe40000.bifrost: default clk set to 4 [ 9.164089@3] mali ffe40000.bifrost: default clk is 4 [ 9.164096@3] mali ffe40000.bifrost: ====================0==================== [ 9.164096@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285 [ 9.164100@3] mali ffe40000.bifrost: ====================1==================== [ 9.164100@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 [ 9.164104@3] mali ffe40000.bifrost: ====================2==================== [ 9.164104@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500 [ 9.164108@3] mali ffe40000.bifrost: ====================3==================== [ 9.164108@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666 [ 9.164112@3] mali ffe40000.bifrost: ====================4==================== [ 9.164112@3] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846 [ 9.164115@3] mali ffe40000.bifrost: ====================5==================== [ 9.164115@3] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846 [ 9.164118@3] mali ffe40000.bifrost: clock dvfs table size is 6 [ 9.164378@3] mali_plat=ffffff8001fbb5c0 [ 9.164885@3] find tzd id: 0 [ 9.164921@3] gpu cooling register okay with err=0 [ 9.170823@3] find tzd id: 0 [ 9.170843@3] gpu core cooling register okay with err=0 [ 9.170878@3] shader_present=1, tiler_present=1, l2_present=1 [ 9.170958@3] Mali_pwr_on:gpu_irq : 200 [ 9.171209@3] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0 [ 9.191758@0] mali ffe40000.bifrost: Probed as mali0 [ 9.283502@0] [0] vcodec_dec decoder [ 9.283700@0] [0] release decoder [ 9.443547@0] IR NEC protocol handler initialized [ 9.472704@2] IR RC6 protocol handler initialized [ 10.038057@3] set mac for wol = 90:0e:b3:10:db:5b [ 10.055720@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 10.056160@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.916315@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.481479@2] vout: aml_tvout_mode_work: monitor_timeout [ 13.113767@3] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 13.113794@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.336017@3] 8021q: 802.1Q VLAN Support v1.8 [ 13.411875@2] the demux clock on, ref cnt: 1 [ 13.411885@2] the parser_top clock on, ref cnt: 1 [ 13.411889@2] the vdec clock on, ref cnt: 1 [ 13.411911@2] the clk_hevc_mux clock on, ref cnt: 1 [ 13.411915@2] the clk_hevcb_mux clock on, ref cnt: 1 [ 13.412015@2] hevc mux clock is 499999992 Hz [ 13.412052@2] hevc back mux clock is 499999992 Hz [ 13.412079@2] the clk_vdec_mux clock on, ref cnt: 1 [ 13.412117@2] vdec mux clock is 799999987 Hz [ 13.412176@2] vdec_create instance ffffff801001f000, total 1 [ 13.412195@2] vdec_disable_DMC input->target= 0x0 [ 13.412198@2] vdec_release instance ffffff801001f000, total 1 [ 13.412228@2] the clk_vdec_mux clock off, ref cnt: 0 [ 13.412231@2] the vdec clock off, ref cnt: 0 [ 13.412233@2] the parser_top clock off, ref cnt: 0 [ 13.412237@2] the demux clock off, ref cnt: 0 [ 13.902226@3] aml_tdm_open [ 13.902402@3] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1 [ 13.903627@3] tdm playback mute: 1, lane_cnt = 8 [ 13.903692@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1 [ 13.904239@1] aml_tdm_open [ 13.904349@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1 [ 13.905325@1] tdm playback mute: 1, lane_cnt = 8 [ 13.905373@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1 [ 13.905913@1] aml_tdm_open [ 13.906884@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi [ 13.907241@1] tdm playback mute: 1, lane_cnt = 4 [ 13.907293@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi [ 13.907810@1] aml_tdm_open [ 13.907910@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi [ 13.908175@1] tdm playback mute: 1, lane_cnt = 4 [ 13.908218@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi [ 13.908704@1] aml_tdm_open [ 13.908789@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi [ 13.909100@1] tdm playback mute: 1, lane_cnt = 4 [ 13.909142@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi [ 13.926515@1] aml_tdm_open [ 13.926675@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1 [ 13.928169@1] tdm playback mute: 1, lane_cnt = 8 [ 13.928226@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1 [ 13.928772@1] aml_tdm_open [ 13.928893@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi [ 13.930008@1] tdm playback mute: 1, lane_cnt = 4 [ 13.930071@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi [ 13.930746@1] aml_spdif_open [ 13.930871@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@0 [ 13.931395@1] spdif_a keep clk continuous [ 13.931402@1] aml_spdif_close [ 13.931450@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@0 [ 13.932024@1] aml_spdif_open [ 13.932121@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 13.933176@1] spdif_b keep clk continuous [ 13.933181@1] aml_spdif_close [ 13.933225@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 13.941228@3] audio_dsp: buf=0 [ 13.941236@3] audio_dsp: IEC958_mode_raw=0 [ 13.941278@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 13.941282@3] audio_dsp: last mode 0,now 0 [ 13.945300@3] aml_spdif_open [ 13.945481@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 13.946364@3] set normal 512 fs /4 fs [ 13.946413@3] set spdifout clk:5644800, mpll:22579200 [ 13.946416@3] get spdifout clk:5644797, mpll:22579186 [ 13.946420@3] aml_dai_set_spdif_fmt , fmt 0x4000 [ 13.946422@3] set normal 512 fs /4 fs [ 13.946438@3] set spdifout clk:5644800, mpll:22579200 [ 13.946441@3] get spdifout clk:5644797, mpll:22579186 [ 13.946524@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 13.946531@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 13.946533@3] hdmitx: hw: set audio [ 13.946536@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 13.946550@3] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 13.946553@3] hdmitx: hw: aud_n_para = 5824 [ 13.946562@3] hdmitx: hw: set channel status [ 13.946593@3] hdmitx: audio: Audio Type: PCM [ 13.946595@3] hdmitx: err chn msk, must larger than 0 [ 13.946597@3] hdmitx: hw: set audio [ 13.946599@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 13.946609@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352 [ 13.946610@3] hdmitx: hw: aud_n_para = 8918 [ 13.946617@3] hdmitx: hw: set channel status [ 13.946645@3] hdmitx: audio: Audio Type: PCM [ 13.946647@3] hdmitx: audio: set audio param [ 13.946651@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 13.946911@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 13.946916@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 13.946917@3] hdmitx: err chn msk, must larger than 0 [ 13.946920@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 13.948420@3] spdif_b keep clk continuous [ 13.948431@3] aml_spdif_close [ 13.948497@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 13.994398@3] fb: osd_release now.index=0,open_count=1 [ 14.011147@3] fb: malloc_osd_memory, cma:ffffff800a994748 [ 14.011156@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608 [ 14.011158@3] fb: use ion buffer for fb memory, fb_index=2 [ 14.011160@3] fb: OSD2 as afbcd mode,afbc_type=2 [ 14.016467@3] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0cb1e0400 [ 14.016476@3] meson-fb fb: ion memory(2): created fb at 0x00000000f2500000, size 1 MiB [ 14.016481@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K [ 14.016481@3] [ 14.016483@3] fb: Frame buffer memory assigned at [ 14.016487@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K [ 14.016487@3] [ 14.016489@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K [ 14.016489@3] [ 14.016493@3] fb: logo_index=0,fb_index=2 [ 14.016495@3] fb: ---------------clear fb2 memory ffffff8010069000 [ 14.016691@3] fb: osd[2] canvas.idx =0x41 [ 14.016692@3] fb: osd[2] canvas.addr=0xf2500000 [ 14.016694@3] fb: osd[2] canvas.width=128 [ 14.016695@3] fb: osd[2] canvas.height=32 [ 14.016697@3] fb: osd[2] frame.width=32 [ 14.016698@3] fb: osd[2] frame.height=32 [ 14.016700@3] fb: osd[2] out_addr_id =0x3 [ 14.027948@3] fb: vpu clkc clock is 199 MHZ [ 14.027959@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 18 [ 14.027961@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 22 [ 14.027962@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53 [ 14.027969@3] fb: malloc_osd_memory, cma:ffffff800a994748 [ 14.027972@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608 [ 14.027974@3] fb: use ion buffer for fb memory, fb_index=3 [ 14.027977@3] fb: OSD3 as afbcd mode,afbc_type=2 [ 14.034914@3] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0cb1e0540 [ 14.034922@3] meson-fb fb: ion memory(3): created fb at 0x00000000f2600000, size 8 MiB [ 14.034927@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K [ 14.034927@3] [ 14.034929@3] fb: Frame buffer memory assigned at [ 14.034932@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K [ 14.034932@3] [ 14.034934@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K [ 14.034934@3] [ 14.034937@3] fb: logo_index=0,fb_index=3 [ 14.034939@3] fb: ---------------clear fb3 memory ffffff801016a000 [ 14.036483@3] fb: osd[3] canvas.idx =0x42 [ 14.036485@3] fb: osd[3] canvas.addr=0xf2600000 [ 14.036487@3] fb: osd[3] canvas.width=128 [ 14.036488@3] fb: osd[3] canvas.height=32 [ 14.036490@3] fb: osd[3] frame.width=32 [ 14.036491@3] fb: osd[3] frame.height=32 [ 14.036493@3] fb: osd[3] out_addr_id =0x4 [ 14.048096@3] vout: vmode set to null [ 14.048262@3] fb: current vmode=1080p60hz, cmd: 0x10000 [ 14.048308@3] vout: new mode null set ok [ 14.048311@3] fb: current vmode=null, cmd: 0x20000 [ 14.048428@3] hdmitx: system: set frac_rate_policy as 1 [ 14.048453@3] vout: vmode set to 1080p60hz [ 14.048515@3] fb: current vmode=null, cmd: 0x10000 [ 14.048522@3] hdmitx: hdmitx_set_current_vmode[3772] [ 14.048524@3] hdmitx: system: recalc before 1080p60hz 2997 50 [ 14.048527@3] hdmitx: system: recalc after 1080p60hz 2997 50 [ 14.048531@3] hdmitx: system: get current mode: 1080p60hz [ 14.048533@3] hdmitx: system: update rx hdr info 0 [ 14.048536@3] hdmitx: system: update physcial size: 480 270 [ 14.048566@3] hdmitx: video: already init VIC = 0 Now VIC = 16 [ 14.048570@3] hdmitx: hw: div40: 0 [ 14.079474@3] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 14.079485@3] hdmitx: frac_rate = 1 [ 14.079489@3] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1 [ 14.079493@3] hdmitx: config HPLL = 5940000 frac_rate = 1 [ 14.079549@3] hdmitx: HPLLv1: 0xdb3a04f7 [ 14.079550@3] hdmitx: config HPLL done [ 14.079556@3] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 14.079561@3] hdmitx: j = 4 vid_clk_div = 1 [ 14.079566@3] hdmitx: set enc for VIC: 16 [ 14.201477@3] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2 [ 14.211590@3] hdmitx: video: Sink is HDMI device [ 14.211623@3] hdmitx: hw: set audio [ 14.211629@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 14.211640@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352 [ 14.211642@3] hdmitx: hw: aud_n_para = 8918 [ 14.211649@3] hdmitx: hw: set channel status [ 14.211678@3] hdmitx: audio: Audio Type: PCM [ 14.211683@3] vout: new mode 1080p60hz set ok [ 14.211687@3] fb: current vmode=1080p60hz, cmd: 0x20000 [ 14.211695@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 14.211698@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 14.228638@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 14.228641@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 14.245009@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 14.245010@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 14.279336@3] audio_dsp: buf=0 [ 14.279344@3] audio_dsp: IEC958_mode_raw=0 [ 14.279384@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 14.279386@3] audio_dsp: last mode 0,now 0 [ 14.283492@3] aml_spdif_open [ 14.287024@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 14.295564@3] set normal 512 fs /4 fs [ 14.295619@3] set spdifout clk:5644800, mpll:22579200 [ 14.295623@3] get spdifout clk:5644797, mpll:22579186 [ 14.295626@3] aml_dai_set_spdif_fmt , fmt 0x4000 [ 14.295628@3] set normal 512 fs /4 fs [ 14.295644@3] set spdifout clk:5644800, mpll:22579200 [ 14.295646@3] get spdifout clk:5644797, mpll:22579186 [ 14.295705@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 14.295711@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 14.295713@3] hdmitx: err chn msk, must larger than 0 [ 14.295717@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 14.295937@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 14.295942@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 14.295944@3] hdmitx: err chn msk, must larger than 0 [ 14.295947@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 14.297197@3] spdif_b keep clk continuous [ 14.297205@3] aml_spdif_close [ 14.297278@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 14.809029@3] vout: vmode set to null [ 14.809115@3] fb: current vmode=1080p60hz, cmd: 0x10000 [ 14.809168@3] vout: new mode null set ok [ 14.809171@3] fb: current vmode=null, cmd: 0x20000 [ 14.809261@3] hdmitx: system: set frac_rate_policy as 1 [ 14.809285@3] vout: vmode set to 1080p60hz [ 14.809317@3] fb: current vmode=null, cmd: 0x10000 [ 14.809323@3] hdmitx: hdmitx_set_current_vmode[3772] [ 14.809326@3] hdmitx: system: recalc before 1080p60hz 2997 50 [ 14.809329@3] hdmitx: system: recalc after 1080p60hz 2997 50 [ 14.809334@3] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0a839720 (VIC: 16) [ 14.809335@3] hdmitx: system: get current mode: 1080p60hz [ 14.809338@3] hdmitx: system: update rx hdr info 0 [ 14.809340@3] hdmitx: system: update physcial size: 480 270 [ 14.809349@3] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0a839720 (VIC: 16) [ 14.809351@3] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 14.809376@3] hdmitx: video: already init VIC = 0 Now VIC = 16 [ 14.809380@3] hdmitx: hw: div40: 0 [ 14.833691@0] hdmitx: system: irq 80000001 0 [ 14.835475@3] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 14.835484@3] hdmitx: frac_rate = 1 [ 14.835487@3] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1 [ 14.835492@3] hdmitx: config HPLL = 5940000 frac_rate = 1 [ 14.835549@3] hdmitx: HPLLv1: 0xdb3a04f7 [ 14.835550@3] hdmitx: config HPLL done [ 14.835557@3] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 14.835563@3] hdmitx: j = 4 vid_clk_div = 1 [ 14.835569@3] hdmitx: set enc for VIC: 16 [ 14.835582@0] hdmitx: system: irq 80000001 0 [ 14.937477@3] hdmitx: [0x10000104]: 0x00000001 [ 14.937484@3] hdmitx: [0x10000180]: 0x000000ff [ 14.937486@3] hdmitx: [0x10000181]: 0x000000ff [ 14.937488@3] hdmitx: [0x10000182]: 0x00000003 [ 14.937489@3] hdmitx: [0x10000183]: 0x00000007 [ 14.937491@3] hdmitx: [0x10000184]: 0x0000003f [ 14.937493@3] hdmitx: [0x10000185]: 0x00000002 [ 14.937495@3] hdmitx: [0x10000187]: 0x000000ff [ 14.937497@3] hdmitx: [0x10000188]: 0x00000003 [ 14.957479@3] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2 [ 14.967586@3] hdmitx: video: Sink is HDMI device [ 14.967620@3] hdmitx: hw: set audio [ 14.967625@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 14.967636@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352 [ 14.967638@3] hdmitx: hw: aud_n_para = 8918 [ 14.967645@3] hdmitx: hw: set channel status [ 14.967675@3] hdmitx: audio: Audio Type: PCM [ 14.967680@3] vout: new mode 1080p60hz set ok [ 14.967684@3] fb: current vmode=1080p60hz, cmd: 0x20000 [ 14.967691@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 14.967693@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 14.984620@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 14.984622@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 15.006428@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 15.006431@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 15.035525@3] audio_dsp: buf=0 [ 15.035533@3] audio_dsp: IEC958_mode_raw=0 [ 15.035571@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 15.035574@3] audio_dsp: last mode 0,now 0 [ 15.039623@3] aml_spdif_open [ 15.039772@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 15.040652@3] set normal 512 fs /4 fs [ 15.040699@3] set spdifout clk:5644800, mpll:22579200 [ 15.040702@3] get spdifout clk:5644797, mpll:22579186 [ 15.040704@3] aml_dai_set_spdif_fmt , fmt 0x4000 [ 15.040708@3] set normal 512 fs /4 fs [ 15.040723@3] set spdifout clk:5644800, mpll:22579200 [ 15.040725@3] get spdifout clk:5644797, mpll:22579186 [ 15.040782@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 15.040790@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 15.040791@3] hdmitx: err chn msk, must larger than 0 [ 15.040797@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 15.040965@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 15.040970@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 15.040971@3] hdmitx: err chn msk, must larger than 0 [ 15.040973@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 15.042028@3] spdif_b keep clk continuous [ 15.042038@3] aml_spdif_close [ 15.042103@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 62.489485@0] fb: mem_free_work, free memory: addr:800000 [ 113.963902@3] audio_dsp: buf=0 [ 113.963910@3] audio_dsp: IEC958_mode_raw=0 [ 113.963945@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 113.963947@3] audio_dsp: last mode 0,now 0 [ 113.969212@0] aml_spdif_open [ 113.969405@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 113.970710@3] set normal 512 fs /4 fs [ 113.970761@3] set spdifout clk:5644800, mpll:22579200 [ 113.970765@3] get spdifout clk:5644797, mpll:22579186 [ 113.970768@3] aml_dai_set_spdif_fmt , fmt 0x4000 [ 113.970772@3] set normal 512 fs /4 fs [ 113.970787@3] set spdifout clk:5644800, mpll:22579200 [ 113.970789@3] get spdifout clk:5644797, mpll:22579186 [ 113.970850@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 113.970856@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 113.970859@3] hdmitx: err chn msk, must larger than 0 [ 113.970865@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 113.971127@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 113.971133@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 113.971134@3] hdmitx: err chn msk, must larger than 0 [ 113.971138@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 113.972373@3] asoc-aml-card auge_sound: S/PDIF Playback enable [ 114.072245@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 114.072356@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 114.072362@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 114.072364@0] hdmitx: err chn msk, must larger than 0 [ 114.072370@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 114.218171@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 114.317944@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 114.318050@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 114.318056@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 114.318058@0] hdmitx: err chn msk, must larger than 0 [ 114.318064@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 114.417682@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 114.517484@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 114.517560@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 114.517566@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 114.517567@0] hdmitx: err chn msk, must larger than 0 [ 114.517573@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 114.605023@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 114.704817@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 114.704926@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 114.704933@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 114.704935@0] hdmitx: err chn msk, must larger than 0 [ 114.704941@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 114.818822@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 114.918600@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 114.918686@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 114.918692@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 114.918694@0] hdmitx: err chn msk, must larger than 0 [ 114.918700@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 115.019330@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 115.119102@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 115.119182@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 115.119188@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 115.119190@0] hdmitx: err chn msk, must larger than 0 [ 115.119195@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 115.208587@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 115.308378@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 115.308474@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 115.308480@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 115.308481@0] hdmitx: err chn msk, must larger than 0 [ 115.308488@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 115.402782@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 115.502558@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 115.502635@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 115.502641@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 115.502643@0] hdmitx: err chn msk, must larger than 0 [ 115.502648@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 115.586482@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 115.686275@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 115.686355@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 115.686361@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 115.686363@0] hdmitx: err chn msk, must larger than 0 [ 115.686368@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 116.368946@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 116.468718@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 116.468799@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 116.468806@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 116.468807@0] hdmitx: err chn msk, must larger than 0 [ 116.468814@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 117.406124@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 117.505923@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 117.506012@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 117.506019@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 117.506021@0] hdmitx: err chn msk, must larger than 0 [ 117.506027@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 117.555212@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 117.654983@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 117.655063@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 117.655070@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 117.655071@0] hdmitx: err chn msk, must larger than 0 [ 117.655078@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 117.952376@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 118.252413@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 118.252490@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 118.252496@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 118.252498@0] hdmitx: err chn msk, must larger than 0 [ 118.252504@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 118.939124@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 119.038910@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 119.038998@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 119.039004@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 119.039006@0] hdmitx: err chn msk, must larger than 0 [ 119.039011@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 119.552080@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 119.852139@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 119.852238@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 119.852245@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 119.852246@0] hdmitx: err chn msk, must larger than 0 [ 119.852252@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 121.209031@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 121.308826@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 121.308918@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 121.308925@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 121.308926@0] hdmitx: err chn msk, must larger than 0 [ 121.308933@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 121.597468@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 121.897562@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 121.897713@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 121.897721@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 121.897723@0] hdmitx: err chn msk, must larger than 0 [ 121.897732@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 122.685684@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 122.785474@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 122.785552@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 122.785560@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 122.785563@0] hdmitx: err chn msk, must larger than 0 [ 122.785569@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 123.076292@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 123.376348@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 123.376438@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 123.376445@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 123.376446@0] hdmitx: err chn msk, must larger than 0 [ 123.376453@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 124.504756@1] asoc-aml-card auge_sound: S/PDIF Playback enable [ 124.604560@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 124.604652@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 124.604658@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 124.604660@0] hdmitx: err chn msk, must larger than 0 [ 124.604666@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 124.678838@1] asoc-aml-card auge_sound: S/PDIF Playback enable [ 124.778613@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 124.778695@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 124.778703@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 124.778705@1] hdmitx: err chn msk, must larger than 0 [ 124.778712@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 125.280482@1] asoc-aml-card auge_sound: S/PDIF Playback enable [ 125.380270@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 125.380344@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 125.380352@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 125.380353@1] hdmitx: err chn msk, must larger than 0 [ 125.380360@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 125.518241@1] asoc-aml-card auge_sound: S/PDIF Playback enable [ 125.618026@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 125.618105@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 125.618114@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 125.618116@1] hdmitx: err chn msk, must larger than 0 [ 125.618124@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 125.896042@1] asoc-aml-card auge_sound: S/PDIF Playback enable [ 126.196091@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 126.196192@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 126.196200@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 126.196203@0] hdmitx: err chn msk, must larger than 0 [ 126.196209@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 127.147834@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 127.247622@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 127.247742@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 127.247749@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 127.247751@0] hdmitx: err chn msk, must larger than 0 [ 127.247757@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 127.714282@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 128.014322@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 128.014399@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 128.014405@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 128.014406@0] hdmitx: err chn msk, must larger than 0 [ 128.014412@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 128.784932@0] asoc-aml-card auge_sound: S/PDIF Playback enable [ 129.085006@0] asoc-aml-card auge_sound: S/PDIF Playback disable [ 129.085103@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 129.085110@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 129.085111@1] hdmitx: err chn msk, must larger than 0 [ 129.085118@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 129.885052@0] the demux clock on, ref cnt: 1 [ 129.885063@0] the parser_top clock on, ref cnt: 1 [ 129.885067@0] the vdec clock on, ref cnt: 1 [ 129.885117@0] vdec_create instance ffffff8010b56000, total 1 [ 129.885705@0] no drmmode [ 129.885789@0] The fw has been loaded. [ 129.885796@0] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK [ 129.891338@2] decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 129.891727@2] [0]dynamic_buf_num_margin=8 [ 129.891733@2] [0]double_write_mode=2304 [ 129.891739@2] [0]h265:pts_unstable=0 [ 129.891743@2] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004 [ 129.892252@2] [LOCAL], the fw (hevc_mmu) will be loaded. [ 129.892457@2] hevc mux clock is 799999987 Hz [ 129.892515@2] hevc back mux clock is 799999987 Hz [ 129.892520@2] hevc video changed to 3840 x 2160 60 fps clk->800MHZ [ 129.893530@2] vfm map vdec-map-0 created [ 129.893570@2] di_receiver_event_fun: vframe provider reg ppmgr [ 129.896133@0] DI: reg f [ 129.896260@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 129.896267@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 129.896269@1] hdmitx: err chn msk, must larger than 0 [ 129.896276@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 129.896556@2] spdif_b keep clk continuous [ 129.896565@2] aml_spdif_close [ 129.896696@2] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 129.896900@2] audio_dsp: buf=0 [ 129.896904@2] audio_dsp: IEC958_mode_raw=0 [ 129.896946@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 129.896948@2] audio_dsp: last mode 0,now 0 [ 129.904976@0] aml_spdif_open [ 129.907634@3] vdec_init, vf_provider_name = vdec.h265.00 [ 129.909201@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1 [ 129.909506@1] [0]vh265 cached=16384 need_size=16384 speed= 24 ms [ 129.910556@1] [0]Bit depth luma = 10 [ 129.910562@1] [0]Bit depth chroma = 10 [ 129.910583@1] [0]set pic_list_init_flag 1 [ 129.911429@1] set normal 512 fs /4 fs [ 129.911501@1] set spdifout clk:6144000, mpll:24576000 [ 129.911504@1] get spdifout clk:6143997, mpll:24575987 [ 129.911507@1] aml_dai_set_spdif_fmt , fmt 0x4000 [ 129.911511@1] set normal 512 fs /4 fs [ 129.911530@1] set spdifout clk:6144000, mpll:24576000 [ 129.911531@1] get spdifout clk:6143997, mpll:24575987 [ 129.911615@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 129.911622@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 129.911623@1] hdmitx: err chn msk, must larger than 0 [ 129.911628@1] hdmitx: hw: set audio [ 129.911631@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 129.911646@1] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 129.911649@1] hdmitx: hw: aud_n_para = 5824 [ 129.911658@1] hdmitx: hw: set channel status [ 129.911687@1] hdmitx: audio: Audio Type: PCM [ 129.911690@1] hdmitx: audio: set audio param [ 129.911694@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 129.911940@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 129.911941@0] [0]init_buf_spec2 3840 1608 [ 129.911944@0] [0]set pic_list_init_flag to 2 [ 129.911988@1] [0]set pic_list_init_flag to 3 [ 129.913102@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 129.913105@1] hdmitx: err chn msk, must larger than 0 [ 129.913113@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 129.917582@1] [0]VH265: output first frame [ 129.918421@3] asoc-aml-card auge_sound: S/PDIF Playback enable [ 129.945485@0] DI bypass all 3840x1608-0x501000. [ 129.949495@0] [ 129.949495@0] [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000 [ 130.268780@3] asoc-aml-card auge_sound: S/PDIF Playback disable [ 130.268916@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 130.268923@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def [ 130.268924@1] hdmitx: err chn msk, must larger than 0 [ 130.268931@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1 [ 130.643814@1] spdif_b keep clk continuous [ 130.643826@1] aml_spdif_close [ 130.643892@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1 [ 130.651320@3] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0 [ 130.651326@3] DI: di_receiver_event_fun: unreg [ 130.651327@3] DI: provider name:(null) [ 130.651367@3] DI: di_unreg_process unreg start 1. [ 130.651378@3] use keep buffer keep frame! [ 130.651386@3] vf_keep_current_locked: keep video successful! [ 130.651390@3] video first pts = 0 [ 130.651391@3] VD1 AFBC 0x1700. [ 130.651397@3] DI: di_unreg_process vf unreg cost 0 ms. [ 130.651399@3] DI: di_unreg_process unreg stop 1. [ 130.651431@3] DI: di_unreg_process_irq:cma release req time: -169408 ms [ 130.651443@3] DI: no release nr ds mem. [ 130.651446@3] di_cma_release:release 0 buffer use 0 ms(4294797888~4294797888) [ 130.651450@3] di:no w [ 130.651452@3] DI: unreg f [ 130.651468@3] vdec_disable_DMC input->target= 0x1 [ 130.651887@1] [0]uninit list [ 130.652126@3] vdec_release instance ffffff8010b56000, total 1 [ 130.652247@3] the vdec clock off, ref cnt: 0 [ 130.652252@3] the parser_top clock off, ref cnt: 0 [ 130.652255@3] the demux clock off, ref cnt: 0 [ 130.652550@3] the demux clock on, ref cnt: 1 [ 130.652555@3] the parser_top clock on, ref cnt: 1 [ 130.652558@3] the vdec clock on, ref cnt: 1 [ 130.652596@3] vdec_create instance ffffff8010ea1000, total 1 [ 130.659776@3] no drmmode [ 130.659814@3] The fw has been loaded. [ 130.659820@3] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK [ 130.660258@3] decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 130.661915@3] [0]dynamic_buf_num_margin=8 [ 130.661923@3] [0]double_write_mode=2304 [ 130.661927@3] [0]h265:pts_unstable=0 [ 130.661931@3] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004 [ 130.664339@0] [LOCAL], the fw (hevc_mmu) will be loaded. [ 130.664931@1] vfm map vdec-map-0 created [ 130.664972@1] di_receiver_event_fun: vframe provider reg ppmgr [ 130.666056@1] DI: reg f [ 130.666269@1] vdec_init, vf_provider_name = vdec.h265.00 [ 130.668092@1] [0]vh265 cached=16384 need_size=16384 speed= 8 ms [ 130.671159@1] [0]Bit depth luma = 10 [ 130.671166@1] [0]Bit depth chroma = 10 [ 130.671185@1] [0]set pic_list_init_flag 1 [ 130.672941@1] [0]init_buf_spec2 3840 1608 [ 130.672949@1] [0]set pic_list_init_flag to 2 [ 130.673002@1] [0]set pic_list_init_flag to 3 [ 130.679679@1] [0]VH265: output first frame [ 131.077683@1] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0 [ 131.077689@1] DI: di_receiver_event_fun: unreg [ 131.077691@1] DI: provider name:(null) [ 131.077724@1] di:no w [ 131.078019@2] DI: di_unreg_process unreg start 1. [ 131.078032@2] use keep buffer keep frame! [ 131.078042@2] vf_keep_current_locked: keep video successful! [ 131.078044@2] VD1 AFBC 0x1700. [ 131.078050@2] DI: di_unreg_process vf unreg cost 0 ms. [ 131.078052@2] DI: di_unreg_process unreg stop 1. [ 131.078093@2] DI: di_unreg_process_irq:cma release req time: -168980 ms [ 131.078117@1] DI: no release nr ds mem. [ 131.078120@1] di_cma_release:release 0 buffer use 0 ms(4294798316~4294798316) [ 131.078770@1] DI: unreg f [ 131.078796@1] vdec_disable_DMC input->target= 0x1 [ 131.079329@0] [0]uninit list [ 131.079601@1] vdec_release instance ffffff8010ea1000, total 1 [ 131.079710@1] the vdec clock off, ref cnt: 0 [ 131.079715@1] the parser_top clock off, ref cnt: 0 [ 131.079718@1] the demux clock off, ref cnt: 0 [ 131.079882@1] the demux clock on, ref cnt: 1 [ 131.079886@1] the parser_top clock on, ref cnt: 1 [ 131.079889@1] the vdec clock on, ref cnt: 1 [ 131.079931@1] vdec_create instance ffffff80111b3000, total 1 [ 131.079957@1] no drmmode [ 131.079980@1] The fw has been loaded. [ 131.079986@1] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK [ 131.080433@1] decoder_bmmu_box_alloc_box, tvp_flags = 0 [ 131.080693@1] [0]dynamic_buf_num_margin=8 [ 131.080697@1] [0]double_write_mode=2304 [ 131.080700@1] [0]h265:pts_unstable=0 [ 131.080704@1] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004 [ 131.080978@1] [LOCAL], the fw (hevc_mmu) will be loaded. [ 131.081659@1] vfm map vdec-map-0 created [ 131.081689@1] di_receiver_event_fun: vframe provider reg ppmgr [ 131.085914@2] DI: reg f [ 131.087471@2] vdec_init, vf_provider_name = vdec.h265.00 [ 131.089518@1] [0]vh265 cached=24576 need_size=16384 speed= 12 ms [ 131.095213@1] [0]Bit depth luma = 10 [ 131.095220@1] [0]Bit depth chroma = 10 [ 131.095249@1] [0]set pic_list_init_flag 1 [ 131.097205@1] [0]init_buf_spec2 3840 1608 [ 131.097213@1] [0]set pic_list_init_flag to 2 [ 131.097259@1] [0]set pic_list_init_flag to 3 [ 131.103982@1] [0]VH265: output first frame [ 131.140273@0] DI bypass all 3840x1608-0x501000. [ 131.150536@0] video first pts = 9a06e06 [ 131.150618@0] new frame show, free keeper [ 131.169569@0] audit: type=1701 audit(1578158933.772:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=4101 comm="PeripBusUSBUdev" exe="/usr/lib/kodi/kodi.bin" sig=6 [ 131.169595@3] audit: type=1701 audit(1578158933.776:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=4101 comm="kodi.bin" exe="/usr/lib/kodi/kodi.bin" sig=11 [ 132.015908@2] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0 [ 132.015914@2] DI: di_receiver_event_fun: unreg [ 132.015915@2] DI: provider name:(null) [ 132.015948@3] DI: di_unreg_process unreg start 1. [ 132.015951@2] di:no w [ 132.015962@3] keep exit is skip current [ 132.015965@3] video first pts = 0 [ 132.015968@3] VD1 AFBC 0x0. [ 132.015974@3] DI: di_unreg_process vf unreg cost 0 ms. [ 132.015976@3] DI: di_unreg_process unreg stop 1. [ 132.016020@3] di_unreg_process_irq disable di mirror image. [ 132.016025@3] DI: di_unreg_process_irq:cma release req time: -168044 ms [ 132.016039@3] DI: no release nr ds mem. [ 132.016044@3] di_cma_release:release 0 buffer use 0 ms(4294799252~4294799252) [ 132.016966@2] DI: unreg f [ 132.016985@2] vdec_disable_DMC input->target= 0x1 [ 132.017495@3] [0]uninit list [ 132.018362@0] vdec_release instance ffffff80111b3000, total 1 [ 132.018464@0] the vdec clock off, ref cnt: 0 [ 132.018469@0] the parser_top clock off, ref cnt: 0 [ 132.018472@0] the demux clock off, ref cnt: 0 [ 132.018767@0] fb: osd_release now.index=3,open_count=1 [ 132.018780@0] fb: osd_release now.index=2,open_count=1 [ 132.018789@0] fb: osd_release now.index=1,open_count=1 [ 132.018793@0] fb: osd_release now.index=0,open_count=1 CoreELEC:~ #