base bootcmd=run setargs_nand boot_normal bootcmd set setargs_mmc key 0 cant find rcvy value cant find fstbt value misc partition found to be run cmd=run setargs_mmc boot_normal update dtb dram start update dtb dram end PowerBus = 3( 2:vBus 3:acBus other: not exist) no battery, limit to dc no battery exist sunxi_bmp_logo_display Net: No ethernet found. [ 1.911]inter uboot shell Hit any key to stop autoboot: 0 [mmc]: MMC Device 2 not found ** Bad device mmc 2 ** reading bananapi/bpi-m2u/linux/uEnv.txt 2261 bytes read in 4 ms (551.8 KiB/s) Loaded environment from uEnv.txt Running uenvcmd ... Banaan Pi bpi-m2u chip: r40 Service: linux reading bananapi/bpi-m2u/linux/uImage 6673544 bytes read in 292 ms (21.8 MiB/s) reading bananapi/berryboot.img ** Unable to read file bananapi/berryboot.img ** ## Booting kernel from Legacy Image at 48000000 ... Image Name: Linux-3.10.65-BPI-M2U-Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6673480 Bytes = 6.4 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK Loading Kernel Image ... OK reserving fdt memory region: addr=43000000 size=800 Using Device Tree in place at 44000000, end 4401909f prepare for kernel [mmc]: MMC Device 2 not found [mmc]: mmc 2 not find, so not exit Starting kernel ... [ 1.080387] platform pwm0: there is no bind_pwm, set bind_pwm 255! [ 1.080387] platform pwm0: there is no dead time, set bind_pwm 255! [ 1.110919] add_sys_pwr_dm: get ldo name for id: vdd-cpus failed [ 1.110919] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed [ 1.110919] add_sys_pwr_dm: get ldo name for id: vcc-pl failed [ 1.120044] add_sys_pwr_dm: axp22_dcdc1 ldo already alwayson. [ 1.120137] Warning: can not find np for dynamic_standby_para. [ 1.186026] OF: no ranges; cannot translate [ 1.186055] OF: no ranges; cannot translate [ 1.186335] OF: no ranges; cannot translate [ 1.186353] OF: no ranges; cannot translate [ 1.356757] sunxi-wlan wlan: request pincrtl handle for device [wlan] failed [ 1.364898] /soc@01c00000/wlan: could not find phandle [ 1.370754] sunxi-wlan wlan: get gpio wlan_hostwake failed [ 1.450039] sunxi-ahci sata: SATA power enable do not exist!! [ 1.713234] sunxi_ir_startup: get cir addr cnt failed [ 1.718711] sunxi_ir_startup: get cir supply_vol failed[ 1.724800] sunxi_ir_startup: cir get supply err [ 1.752609] get() with no identifier [ 1.756614] get() with no identifier [ 1.760790] get() with no identifier [ 1.850088] *mmc0 detect cd change* [ 1.854009] *mmc0 lock* [ 1.890852] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !! [ 1.897714] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !! [ 1.908449] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !! [ 1.915227] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !! [ 1.921992] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !! [ 1.928728] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !! [ 1.969944] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! [ 1.976829] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! [ 1.987202] sunxi-mmc sdc1: smc 1 p1 err, cmd 8, RTO !! [ 1.993964] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! [ 2.000707] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! [ 2.007452] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! [ 2.014243] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! [ 2.021007] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !! [ 2.027857] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !! [ 2.034707] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !! [ 2.041750] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !! [ 2.048655] sunxi-mmc sdc1: smc 1 p1 err, cmd 1, RTO !! [ 2.072806] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.086447] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.776751] Failed to execute /init. Attempting defaults... [ 3.118100] systemd[1]: Failed to insert module 'ipv6' [ 4.431075] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! [ 4.431960] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! [ 4.436581] sunxi-mmc sdc1: smc 1 p1 err, cmd 8, RTO !! [ 5.997703] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0 [ 6.016687] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0 [ 6.036223] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0 ov5640 sensor read retry=2 [ 6.103072] [VFE_ERR]vfe sensor register check error at input_num = 0 [ 69.353146] EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy:755: group 1, 2 clusters in bitmap, 1 in gd [ 69.374787] EXT4-fs (mmcblk0p2): Remounting filesystem read-only [ 69.393202] EXT4-fs (mmcblk0p2): ext4_da_writepages: jbd2_start: 2147483646 pages, ino 40518; err -30 Debian GNU/Linux 8 bpi-iot-ros-ai ttyS0 bpi-iot-ros-ai login: