make[1]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime"
Running tests...
OPENMODELICAHOME=
+ Tearnonlin1 ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-tearnonlin1.mos
true
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 400, tolerance = 1e-10, method = 'dassl', fileNamePrefix = 'tearnonlin1', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: tearnonlin1"
end SimulationResult;
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:35.647552424 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:35.740885694 +0100
@@ -1,6 +1,6 @@
true
record SimulationResult
-resultFile = "tearnonlin1_res.csv",
-simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 400, tolerance = 0.0000000001, method = 'dassl', fileNamePrefix = 'tearnonlin1', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 3.0, numberOfIntervals = 400, tolerance = 1e-10, method = 'dassl', fileNamePrefix = 'tearnonlin1', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Failed to build model: tearnonlin1"
end SimulationResult;
Equation mismatch: omc-diff says:
Failed 't' '"'
Line 3: Text differs:
expected: resultFile = "tearnonlin
got: resultFile = "",
+ WhenStatement1 ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-WhenStatement1.mos
true
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 400, tolerance = 0.001, method = 'dassl', fileNamePrefix = 'WhenStat', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: WhenStat"
end SimulationResult;
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:35.767552342 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:35.854218950 +0100
@@ -1,6 +1,6 @@
true
record SimulationResult
-resultFile = "WhenStat_res.csv",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 400, tolerance = 0.001, method = 'dassl', fileNamePrefix = 'WhenStat', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: WhenStat"
end SimulationResult;
Equation mismatch: omc-diff says:
Failed 'W' '"'
Line 3: Text differs:
expected: resultFile = "WhenStat_res.csv",
got: resultFile = "",
+ WhenTuple ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-WhenTuple.mos
true
""
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIDtuple', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: DIDtuple"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
DIDtuple.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:35.877552267 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:35.974218868 +0100
@@ -1,17 +1,21 @@
true
""
true
""
record SimulationResult
-resultFile = "DIDtuple_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIDtuple', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: DIDtuple"
end SimulationResult;
-""
-0.8
-0.2
--0.2
--1.0
-1.09
-1.24
-1.09
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+DIDtuple.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
+
+
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'D' '"'
Line 6: Text differs:
expected: resultFile = "DIDtuple_res.mat",
got: resultFile = "",
+ BouncingBall ... equation mismatch [time: 1]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-BouncingBall.mos
true
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 100, tolerance = 1e-10, method = 'dassl', fileNamePrefix = 'BouncingBall', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: BouncingBall"
end SimulationResult;
{"Error opening file: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/BouncingBall_res.mat"}
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:35.997552186 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.084218792 +0100
@@ -1,7 +1,7 @@
true
record SimulationResult
-resultFile = "BouncingBall_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 100, tolerance = 0.0000000001, method = 'dassl', fileNamePrefix = 'BouncingBall', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 100, tolerance = 1e-10, method = 'dassl', fileNamePrefix = 'BouncingBall', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Failed to build model: BouncingBall"
end SimulationResult;
-{"Files Equal!"}
+{"Error opening file: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/BouncingBall_res.mat"}
Equation mismatch: omc-diff says:
Failed 'B' '"'
Line 3: Text differs:
expected: resultFile = "BouncingBall_res.mat",
got: resultFile = "",
+ arraySliceTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-arraySliceTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ArraySlice.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: ArraySlice.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
ArraySlice.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.107552109 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.197552046 +0100
@@ -1,11 +1,15 @@
true
true
""
record SimulationResult
-resultFile = "ArraySlice.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ArraySlice.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: ArraySlice.Test"
end SimulationResult;
-""
-4.0
-1.0
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+ArraySlice.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
+
Equation mismatch: omc-diff says:
Failed 'A' '"'
Line 5: Text differs:
expected: resultFile = "ArraySlice.Test_res.mat",
got: resultFile = "",
+ clockedAlgloopTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-clockedAlgloopTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1500.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MixingUnit', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: MixingUnit"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
MixingUnit.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.220885363 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.327551955 +0100
@@ -1,13 +1,17 @@
true
true
""
record SimulationResult
-resultFile = "MixingUnit_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1500.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MixingUnit', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: MixingUnit"
end SimulationResult;
-0.3
-300.0
-0.239778
-323.7585
-""
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+MixingUnit.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'M' '"'
Line 5: Text differs:
expected: resultFile = "MixingUnit_res.mat",
got: resultFile = "",
+ clockedEventTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-clockedEventTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'EventClock', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: EventClock"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
EventClock.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.350885273 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.447551872 +0100
@@ -1,11 +1,15 @@
true
true
""
record SimulationResult
-resultFile = "EventClock_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'EventClock', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: EventClock"
end SimulationResult;
-2.0
-21.0
-""
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+EventClock.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'E' '"'
Line 5: Text differs:
expected: resultFile = "EventClock_res.mat",
got: resultFile = "",
+ clockedSolverTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-clockedSolverTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'SolverMethod', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: SolverMethod"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
SolverMethod.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.474218520 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.574218450 +0100
@@ -1,15 +1,19 @@
true
true
""
record SimulationResult
-resultFile = "SolverMethod_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'SolverMethod', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'SolverMethod', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Failed to build model: SolverMethod"
end SimulationResult;
-0.0
-1.120803833007813
-0.9988845212685719
-0.0
-0.09336471557617204
--0.0007381858367627922
-""
+
+
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+SolverMethod.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'S' '"'
Line 5: Text differs:
expected: resultFile = "SolverMethod_res.mat",
got: resultFile = "",
+ clockedTypesTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-clockedTypesTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ClockedTypes', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: ClockedTypes"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
ClockedTypes.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.600885098 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.700885029 +0100
@@ -1,15 +1,19 @@
true
true
""
record SimulationResult
-resultFile = "ClockedTypes_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ClockedTypes', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: ClockedTypes"
end SimulationResult;
-0.0
-0.0
-1.0
-0.0
-1.0
-2.0
-""
+
+
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+ClockedTypes.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'C' '"'
Line 5: Text differs:
expected: resultFile = "ClockedTypes_res.mat",
got: resultFile = "",
+ clockedTest ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-clockedTest.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DID', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: DID"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
DID.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.724218346 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:36.817551614 +0100
@@ -1,15 +1,19 @@
true
true
""
record SimulationResult
-resultFile = "DID_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DID', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: DID"
end SimulationResult;
-1.0
--0.8
--1.0
-0.0
-0.25
-0.0
-""
+
+
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+DID.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'D' '"'
Line 5: Text differs:
expected: resultFile = "DID_res.mat",
got: resultFile = "",
+ externalArrayInputTest ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-externalArrayInputTest.mos
true
""
true
""
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ExternalArrayInput.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: ExternalArrayInput.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
ExternalArrayInput.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:36.840884932 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:38.750883564 +0100
@@ -3,12 +3,16 @@
true
""
true
""
record SimulationResult
-resultFile = "ExternalArrayInput.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ExternalArrayInput.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: ExternalArrayInput.Test"
end SimulationResult;
-""
-1.0
-3.0
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+ExternalArrayInput.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
+
Equation mismatch: omc-diff says:
Failed 'E' '"'
Line 8: Text differs:
expected: resultFile = "ExternalArrayInput.Test_res.mat",
got: resultFile = "",
+ mathFunctionsTest ... equation mismatch [time: 3]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-mathFunctionsTest.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MathFunctions.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: MathFunctions.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
MathFunctions.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:38.777550211 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:41.034215191 +0100
@@ -1,19 +1,23 @@
true
true
true
""
record SimulationResult
-resultFile = "MathFunctions.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MathFunctions.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: MathFunctions.Test"
end SimulationResult;
-1.0
-1.0
-1.0
-1.0
-1.0
-0.0
-2.0
-2.0
-0.0
-""
+
+
+
+
+
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+MathFunctions.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'M' '"'
Line 6: Text differs:
expected: resultFile = "MathFunctions.Test_res.mat",
got: resultFile = "",
+ nameClashTest ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-nameClashTest.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'NameClash.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: NameClash.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
NameClash.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:41.060881837 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:43.330880062 +0100
@@ -1,12 +1,16 @@
true
true
true
""
record SimulationResult
-resultFile = "NameClash.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'NameClash.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: NameClash.Test"
end SimulationResult;
-0.0
-0.0
-""
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+NameClash.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'N' '"'
Line 6: Text differs:
expected: resultFile = "NameClash.Test_res.mat",
got: resultFile = "",
+ functionPointerTest ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-functionPointerTest.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'FunctionPointer.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: FunctionPointer.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
FunctionPointer.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:43.360880038 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:45.577544896 +0100
@@ -1,12 +1,16 @@
true
true
true
""
record SimulationResult
-resultFile = "FunctionPointer.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'FunctionPointer.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: FunctionPointer.Test"
end SimulationResult;
-20.0
-22.0
-""
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+FunctionPointer.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'F' '"'
Line 6: Text differs:
expected: resultFile = "FunctionPointer.Test_res.mat",
got: resultFile = "",
+ recordTupleReturnTest ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-recordTupleReturnTest.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'RecordTupleReturn.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: RecordTupleReturn.Test"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
RecordTupleReturn.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:45.607544871 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:47.804209675 +0100
@@ -1,12 +1,16 @@
true
true
true
""
record SimulationResult
-resultFile = "RecordTupleReturn.Test_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'RecordTupleReturn.Test', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: RecordTupleReturn.Test"
end SimulationResult;
-2.0
-3.0
-""
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+RecordTupleReturn.Test.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'R' '"'
Line 6: Text differs:
expected: resultFile = "RecordTupleReturn.Test_res.mat",
got: resultFile = "",
+ RefArrayDim2 ... equation mismatch [time: 3]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-RefArrayDim2.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'AliasArrayTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: AliasArrayTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
AliasArrayTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:47.834209649 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:50.140874281 +0100
@@ -1,13 +1,17 @@
true
true
true
""
record SimulationResult
-resultFile = "AliasArrayTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'AliasArrayTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: AliasArrayTest"
end SimulationResult;
-""
-0.2
-0.2
-0.2
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+AliasArrayTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
+
+
Equation mismatch: omc-diff says:
Failed 'A' '"'
Line 6: Text differs:
expected: resultFile = "AliasArrayTest_res.mat",
got: resultFile = "",
+ solveTest ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-solveTest.mos
true
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'SolveTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: SolveTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
SolveTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:50.170874254 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:52.467538815 +0100
@@ -1,12 +1,16 @@
true
true
true
""
record SimulationResult
-resultFile = "SolveTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'SolveTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: SolveTest"
end SimulationResult;
--3.5
-4.0
-""
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+SolveTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'S' '"'
Line 6: Text differs:
expected: resultFile = "SolveTest_res.mat",
got: resultFile = "",
+ testArrayEquations ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-testArrayEquations.mos
true
""
true
""
true
""
true
""
*********************
* SimCode Equations *
*********************
allEquations:
========================================
========================================
odeEquations (0 systems):
========================================
========================================
algebraicEquations (0 systems):
========================================
========================================
clockPartitions (1 systems):
BaseClock:
========================================
Clock(RCONST 0.1
)========================================
SubPartition Vars:
========================================
index: -1: $DER.x4 (no alias) initial: no arrCref index:() [10]
index: -1: x1 (no alias) initial: no arrCref index:() [10] (PREVIOUS)
index: -1: x2 (no alias) initial: no arrCref index:() [10] (PREVIOUS)
index: -1: x3 (no alias) initial: no arrCref index:() [10] (PREVIOUS)
index: -1: x4 (no alias) initial: no arrCref index:() [10] (PREVIOUS)
index: -1: y1 (no alias) initial: no arrCref index:() []
index: -1: y2 (no alias) initial: no arrCref index:() []
index: -1: y3 (no alias) initial: no arrCref index:() []
index: -1: y4 (no alias) initial: no arrCref index:() []
partition equations:
========================================
26: $CLKPRE.x1=x1 [Real[10]]
25: $CLKPRE.x2=x2 [Real[10]]
24: $CLKPRE.x3=x3 [Real[10]]
23: $CLKPRE.x4=x4 [Real[10]]
14 FOR-LOOP: for i in (1:10) loop
x1[i]=if firstTick() then previous(x1[i]) else previous(x1[i]) + u[i][Real]
end for;
15: y1=sum(x1) [Real]
16: x2=ArrayEquationsTest.myfor(u, previous(x2), firstTick()) [Real[10]]
17: y2=sum(x2) [Real]
18: x3=if firstTick() then previous(x3) else previous(x3) + u [Real[10]]
19 FOR-LOOP: for i in (1:10) loop
$DER.x4[i]=x3[i][Real]
end for;
20 FOR-LOOP: for i in (1:10) loop
x4[i]=(if firstTick() then 0.0 else $DER.x4[i]) * interval() + previous(x4[i])[Real]
end for;
21: y4=sum(x4) [Real]
22: y3=sum(x3) [Real]removedEquations equations:
========================================
SubClock:
factor(1/1) shift(0/1) Hold Events: false
========================================
initialEquations: (13)
========================================
1: $DER.x4=0.0 [Real]
2: x1=1.0 [Real]
3: $CLKPRE.x1=x1 [Real[10]]
4: x2=2.0 [Real]
5: $CLKPRE.x2=x2 [Real[10]]
6: x3=3.0 [Real]
7: $CLKPRE.x3=x3 [Real[10]]
8: x4=4.0 [Real]
9: $CLKPRE.x4=x4 [Real[10]]
10: y1=0.0 [Real]
11: y2=0.0 [Real]
12: y3=0.0 [Real]
13: y4=0.0 [Real]
========================================
initialEquations_lambda0: (0)
========================================
removedInitialEquations:
========================================
startValueEquations:
========================================
nominalValueEquations:
========================================
minValueEquations:
========================================
maxValueEquations:
========================================
parameterEquations:
========================================
27: n=10 [Integer]
removedEquations:
========================================
algorithmAndEquationAsserts:
========================================
equationsForZeroCrossings:
========================================
jacobianEquations:
========================================
jacobianMatrices:
========================================
Jacobian idx: 0
Jacobian idx: 1
Jacobian idx: 2
Jacobian idx: 3
Jacobian idx: 4
modelInfo:
========================================
algVars (104)
----------------------
index: 0: $CLKPRE.x1 (no alias) initial: x1 no arrCref index:(1) [10]
index: 1: $CLKPRE.x2 (no alias) initial: x2 no arrCref index:(11) [10]
index: 2: $CLKPRE.x3 (no alias) initial: x3 no arrCref index:(21) [10]
index: 3: $CLKPRE.x4 (no alias) initial: x4 no arrCref index:(31) [10]
index: 4: $DER.x4 (no alias) initial: no arrCref index:(41) [10]
index: 5: u (no alias) initial: 1.0:10.0 no arrCref index:(51) [10]
index: 6: x1 (no alias) initial: no arrCref index:(61) [10]
index: 7: x2 (no alias) initial: no arrCref index:(71) [10]
index: 8: x3 (no alias) initial: no arrCref index:(81) [10]
index: 9: x4 (no alias) initial: no arrCref index:(91) [10]
index: 10: y1 (no alias) initial: no arrCref index:(101) []
index: 11: y2 (no alias) initial: no arrCref index:(102) []
index: 12: y3 (no alias) initial: no arrCref index:(103) []
index: 13: y4 (no alias) initial: no arrCref index:(104) []
intParamVars
----------------------
index: 0: n (no alias) initial: 10 no arrCref index:(105) []
functions:
-----------
Function: ArrayEquationsTest.myfor
outVars: x (Real, ) ,
functionArguments: u (array(Real)[:], ) , previous_x (array(Real)[size(u, 1)], ) , isFirstTick (Boolean, ) ,
variableDeclarations: x (Real, ) ,
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ArrayEquationsTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: ArrayEquationsTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
ArrayEquationsTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:52.497538787 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:52.610872015 +0100
@@ -171,14 +171,18 @@
Function: ArrayEquationsTest.myfor
outVars: x (Real, ) ,
functionArguments: u (array(Real)[:], ) , previous_x (array(Real)[size(u, 1)], ) , isFirstTick (Boolean, ) ,
variableDeclarations: x (Real, ) ,
record SimulationResult
-resultFile = "ArrayEquationsTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ArrayEquationsTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: ArrayEquationsTest"
end SimulationResult;
-""
-560.0
-570.0
-580.0
-372.5
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+ArrayEquationsTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
+
+
+
Equation mismatch: omc-diff says:
--------------------------------------------------------------------------------------------------------------Failed 'A' '"'
Line 176: Text differs:
expected: resultFile = "ArrayEquationsTest_res.mat",
got: resultFile = "",
+ testMatrixIO ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-testMatrixIO.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MatrixIOTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: MatrixIOTest"
end SimulationResult;
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:52.637538656 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:52.737538563 +0100
@@ -1,16 +1,16 @@
true
true
""
record SimulationResult
-resultFile = "MatrixIOTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MatrixIOTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: MatrixIOTest"
end SimulationResult;
-12.0
-12.0
-12.0
-12.0
-12.0
-12.0
--12.0
--12.0
+
+
+
+
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'M' '"'
Line 5: Text differs:
expected: resultFile = "MatrixIOTest_res.mat",
got: resultFile = "",
+ testVectorizedBlocks ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-testVectorizedBlocks.mos
true
""
true
""
true
""
true
""
true
""
true
""
########################################
dumpDAE
########################################
clocked partition(1)
========================================
Variables (5)
========================================
1: output y:VARIABLE(flow=false ) type: Real[10] [10]
2: integrator1.u:VARIABLE(flow=false ) "Connector of Real input signal" type: Real[10] [10]
3: integrator1.y:VARIABLE(flow=false start = integrator1.y_start ) "Connector of Real output signal" type: Real[10] [10]
4: assignClock1.y:VARIABLE(flow=false ) "Connector of clocked, Real output signal" type: Real[10] [10]
5: assignClock1.u:VARIABLE(flow=false ) "Connector of clocked, Real input signal" type: Real[10] [10]
Equations (5, 5)
========================================
1/1 (10): u = assignClock1.u [dynamic |0|0|0|0|]
2/11 (10): assignClock1.y = integrator1.u [dynamic |0|0|0|0|]
3/21 (10): integrator1.y = y [dynamic |0|0|0|0|]
4/31 (10): assignClock1.y = assignClock1.u [dynamic |0|0|0|0|]
5/41 (10): for $i in 1 : 10 loop
der(integrator1[$i].y) = integrator1[$i].k * integrator1[$i].u; end for; [dynamic |0|0|0|0|]
no matching
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (9)
========================================
1: n:PARAM(final = true ) = 10 type: Integer
2: input u:VARIABLE(flow=false start = 1.0:10.0 ) type: Real[10] [10]
3: periodicClock1.period:PARAM(unit = "s" final = true ) = 0.1 "Period of clock (defined as Real number)" type: Real
4: periodicClock1.useSolver:PARAM(final = true ) = true "= true, if solverMethod shall be explicitly defined" type: Boolean
5: periodicClock1.solverMethod:PARAM() = "ImplicitEuler" "Integration method used for discretized continuous-time partitions" type: String
6: assignClock1.n:PARAM(min = 1 final = true ) = 10 "Size of input signal vector u (= size of output signal vector y)" type: Integer
7: integrator1.y_start:PARAM() = 1.0:10.0 "Initial or guess value of output (= state)" type: Real[10] [10]
8: integrator1.initType:PARAM(final = true ) = Modelica.Blocks.Types.Init.InitialState "Type of initialization (1: no init, 2: steady state, 3,4: initial output)" type: enumeration(NoInit, SteadyState, InitialState, InitialOutput)[10] [10]
9: integrator1.k:PARAM(unit = "1" ) = 1.0 "Integrator gain" type: Real[10] [10]
Initial Equations (1, 1)
========================================
1/1 (10): integrator1.y = integrator1.y_start [dynamic |0|0|0|0|]
Base partitions (1)
========================================
1: Clock(0.1)[1]
Sub partitions (1)
========================================
1: factor(1/1) shift(0/1) solver(ImplicitEuler) event(false)
########################################
dumpDAE
########################################
clocked partition(1)
========================================
Variables (6)
========================================
1: output y:VARIABLE(flow=false ) type: Real[10] [10]
2: integrator1.u:VARIABLE(flow=false ) "Connector of Real input signal" type: Real[10] [10]
3: integrator1.y:CLOCKED_STATE(flow=false start = integrator1.y_start fixed = true ) "Connector of Real output signal" type: Real[10] [10]
4: assignClock1.y:VARIABLE(flow=false ) "Connector of clocked, Real output signal" type: Real[10] [10]
5: assignClock1.u:VARIABLE(flow=false ) "Connector of clocked, Real input signal" type: Real[10] [10]
6: $DER.integrator1.y:VARIABLE() type: Real[10] [10]
Equations (6, 6)
========================================
1/1 (10): u = assignClock1.u [dynamic |0|0|0|0|]
2/11 (10): assignClock1.y = integrator1.u [dynamic |0|0|0|0|]
3/21 (10): integrator1.y = y [dynamic |0|0|0|0|]
4/31 (10): assignClock1.y = assignClock1.u [dynamic |0|0|0|0|]
5/41 (10): for $i in 1 : 10 loop
$DER.integrator1[$i].y = integrator1[$i].k * integrator1[$i].u; end for; [dynamic |0|0|0|0|]
6/51 (10): for i in 1 : 10 loop
(integrator1[i].y - previous(integrator1[i].y)) / interval() = if firstTick() then 0.0 else $DER.integrator1[i].y; end for; [dynamic |0|0|0|0|]
Matching
========================================
6 variables and equations
var 1 is solved in eqn 3
var 2 is solved in eqn 2
var 3 is solved in eqn 6
var 4 is solved in eqn 4
var 5 is solved in eqn 1
var 6 is solved in eqn 5
StrongComponents
========================================
Array {{1:5}}
Array {{4:4}}
Array {{2:2}}
{5:6}
{6:3}
Array {{3:1}}
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (9)
========================================
1: integrator1.k:PARAM(unit = "1" ) = 1.0 "Integrator gain" type: Real[10] [10]
2: integrator1.initType:PARAM(final = true ) = Modelica.Blocks.Types.Init.InitialState "Type of initialization (1: no init, 2: steady state, 3,4: initial output)" type: enumeration(NoInit, SteadyState, InitialState, InitialOutput)[10] [10]
3: integrator1.y_start:PARAM() = 1.0:10.0 "Initial or guess value of output (= state)" type: Real[10] [10]
4: assignClock1.n:PARAM(min = 1 final = true ) = 10 "Size of input signal vector u (= size of output signal vector y)" type: Integer
5: periodicClock1.solverMethod:PARAM() = "ImplicitEuler" "Integration method used for discretized continuous-time partitions" type: String
6: periodicClock1.useSolver:PARAM(final = true ) = true "= true, if solverMethod shall be explicitly defined" type: Boolean
7: periodicClock1.period:PARAM(unit = "s" final = true ) = 0.1 "Period of clock (defined as Real number)" type: Real
8: input u:VARIABLE(flow=false start = 1.0:10.0 fixed = true ) type: Real[10] [10]
9: n:PARAM(final = true ) = 10 type: Integer
Base partitions (1)
========================================
1: Clock(0.1)[1]
Sub partitions (1)
========================================
1: factor(1/1) shift(0/1) solver(ImplicitEuler) event(false)
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedBlocksTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: VectorizedBlocksTest"
end SimulationResult;
"Notification: Automatically loaded package Modelica 3.2.2 due to uses annotation.
Notification: Automatically loaded package Complex 3.2.2 due to uses annotation.
Notification: Automatically loaded package ModelicaServices 3.2.2 due to uses annotation.
Notification: Automatically loaded package Modelica_Synchronous 0.93.0 due to uses annotation.
Warning: Requested package Modelica of version 3.2.3, but this package was already loaded with version 3.2.2. You might experience problems if these versions are incompatible.
Warning: Requested package ModelicaServices of version 3.2.3, but this package was already loaded with version 3.2.2. You might experience problems if these versions are incompatible.
Warning: The initial conditions are over specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
VectorizedBlocksTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:52.764205205 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:54.717536679 +0100
@@ -151,19 +151,23 @@
========================================
1: factor(1/1) shift(0/1) solver(ImplicitEuler) event(false)
record SimulationResult
-resultFile = "VectorizedBlocksTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedBlocksTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: VectorizedBlocksTest"
end SimulationResult;
"Notification: Automatically loaded package Modelica 3.2.2 due to uses annotation.
Notification: Automatically loaded package Complex 3.2.2 due to uses annotation.
Notification: Automatically loaded package ModelicaServices 3.2.2 due to uses annotation.
Notification: Automatically loaded package Modelica_Synchronous 0.93.0 due to uses annotation.
Warning: Requested package Modelica of version 3.2.3, but this package was already loaded with version 3.2.2. You might experience problems if these versions are incompatible.
Warning: Requested package ModelicaServices of version 3.2.3, but this package was already loaded with version 3.2.2. You might experience problems if these versions are incompatible.
Warning: The initial conditions are over specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+VectorizedBlocksTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
-10.0
-20.0
+
+
Equation mismatch: omc-diff says:
Failed 'V' '"'
Line 156: Text differs:
expected: resultFile = "VectorizedBlocksTest_res.mat",
got: resultFile = "",
+ testVectorizedPowerSystem ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-testVectorizedPowerSystem.mos
true
""
true
""
true
""
true
""
true
""
true
""
true
""
true
""
########################################
dumpDAE
########################################
unspecified partition
========================================
Variables (1)
========================================
1: system.initime:DISCRETE(unit = "s" ) type: Real
Equations (1, 1)
========================================
1/1 (1): when initial() then
system.initime := time;
end when; [dynamic |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.phi:VARIABLE(unit = "rad" ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.phi = 0.0 [binding |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.I:VARIABLE(unit = "A" nominal = 1.0 ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.I = busBar1.i[1] [binding |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.V:VARIABLE(unit = "V" nominal = 1000.0 ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.V = busBar1.v[1] [binding |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (5)
========================================
1: system.omega_internal:VARIABLE(flow=false protected = true ) type: Real
2: system.omega:VARIABLE(start = 314.1592653589793 unit = "rad/s" ) type: Real
3: system.thetaRef:VARIABLE(unit = "rad" ) "angle of reference frame" type: Real
4: system.thetaRel:VARIABLE(unit = "rad" ) "angle relative to reference frame" type: Real
5: system.theta:VARIABLE(start = 0.0 unit = "rad" ) "system angle" type: Real
Equations (5, 5)
========================================
1/1 (1): system.thetaRef / time = system.omega_internal [dynamic |0|0|0|0|]
2/2 (1): system.omega = 314.1592653589793 [dynamic |0|0|0|0|]
3/3 (1): system.thetaRef = system.omega * time [dynamic |0|0|0|0|]
4/4 (1): system.thetaRel = system.theta - system.thetaRef [binding |0|0|0|0|]
5/5 (1): system.thetaRef = system.theta [binding |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: fixedVoltageSource1.phi:VARIABLE(unit = "rad" ) type: Real
Equations (1, 1)
========================================
1/1 (1): fixedVoltageSource1.phi = 0.0 [binding |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (13)
========================================
1: busBar1.p:VARIABLE(unit = "W" ) type: Real[1] [1]
2: busBar1.i:VARIABLE(start = busBar1.i_start unit = "A" nominal = 1.0 ) type: Real[1] [1]
3: busBar1.v:VARIABLE(start = busBar1.v_start unit = "V" nominal = 1000.0 ) type: Real[1] [1]
4: busBar1.terminal_n.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[3, 1] [3,1]
5: busBar1.terminal_n.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[3, 1] [3,1]
6: busBar1.terminal_p.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[1] [1]
7: busBar1.terminal_p.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[1] [1]
8: fixedLoad1.terminal.v:VARIABLE(flow=false start = fixedLoad1.v_start unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[3, 1] [3,1]
9: fixedLoad1.terminal.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[3, 1] [3,1]
10: fixedLoad1.p:VARIABLE(unit = "W" ) type: Real[3, 1] [3,1]
11: fixedVoltageSource1.p:VARIABLE(unit = "W" ) type: Real[1] [1]
12: fixedVoltageSource1.terminal.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[1] [1]
13: fixedVoltageSource1.terminal.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[1] [1]
Equations (13, 13)
========================================
1/1 (3): busBar1.terminal_n.v = fixedLoad1.terminal.v [dynamic |0|0|0|0|]
2/4 (3): busBar1.terminal_n.i + fixedLoad1.terminal.i = 0.0 [dynamic |0|0|0|0|]
3/7 (1): fixedVoltageSource1.terminal.v = busBar1.terminal_p.v [dynamic |0|0|0|0|]
4/8 (1): fixedVoltageSource1.terminal.i + busBar1.terminal_p.i = 0.0 [dynamic |0|0|0|0|]
5/9 (1): fixedVoltageSource1.p = {fixedVoltageSource1.terminal.v * fixedVoltageSource1.terminal.i} [dynamic |0|0|0|0|]
6/10 (1): fixedVoltageSource1.terminal.v = {fixedVoltageSource1.V} [dynamic |0|0|0|0|]
7/11 (3): for $i in 1 : 3 loop
fixedLoad1[$i].p = {fixedLoad1[$i].terminal.v * fixedLoad1[$i].terminal.i}; end for; [dynamic |0|0|0|0|]
8/14 (3): for $i in 1 : 3 loop
fixedLoad1[$i].terminal.v * fixedLoad1[$i].terminal.i = fixedLoad1[$i].P; end for; [dynamic |0|0|0|0|]
9/17 (1): busBar1.v = busBar1.terminal_p.v [dynamic |0|0|0|0|]
10/18 (1): busBar1.i = busBar1.terminal_p.i [dynamic |0|0|0|0|]
11/19 (1): busBar1.p = {busBar1.v * busBar1.i} [dynamic |0|0|0|0|]
12/20 (1): for i in 1 : 1 loop
busBar1.terminal_p.i[i] = -sum(busBar1.terminal_n[:].i[i]); end for; [dynamic |0|0|0|0|]
13/21 (3): for i in 1 : 3 loop
busBar1.terminal_n[i].v = busBar1.terminal_p.v; end for; [dynamic |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.w_h:VARIABLE(flow=false ) "Dummy potential-variable to balance flow-variable w_H" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.w_h = 0.0 [dynamic |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.h:VARIABLE(flow=false ) "Dummy potential-variable to balance flow-variable H" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.h = 0.0 [dynamic |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.w_H:VARIABLE(flow=true unit = "rad" ) "angular velocity, inertia-weighted" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.w_H = 0.0 [dynamic |0|0|0|0|]
no matching
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.H:VARIABLE(flow=true unit = "s" ) "inertia constant" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.H = 0.0 [dynamic |0|0|0|0|]
no matching
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (20)
========================================
1: busBar1.n_n:PARAM(final = true ) = 3 type: Integer
2: busBar1.i_start:PARAM(unit = "A" nominal = 1.0 ) = {0.0} "Start value for current" type: Real[1] [1]
3: busBar1.v_start:PARAM(unit = "V" nominal = 1000.0 ) = {0.0} "Start value for voltage drop" type: Real[1] [1]
4: fixedLoad1.v_start:PARAM(unit = "V" nominal = 1000.0 ) = {1.0} "Start value for voltage drop" type: Real[3, 1] [3,1]
5: fixedLoad1.P:PARAM(unit = "W" ) = 1000000.0:1000000.0:3000000.0 "rms value of constant active power" type: Real[3] [3]
6: fixedLoad1.phi:PARAM(unit = "rad" ) = 0.1:0.1:0.3 "phase angle" type: Real[3] [3]
7: system.synRef:PARAM(final = true ) = true type: Boolean
8: system.w_nom:PARAM(unit = "rad/s" final = true ) = 314.1592653589793 "nom r.p.m." type: Real
9: system.omega_nom:PARAM(unit = "rad/s" final = true ) = 314.1592653589793 "nominal angular frequency" type: Real
10: system.dynType:PARAM(min = PowerSystems.Types.Dynamics.FreeInitial max = PowerSystems.Types.Dynamics.SteadyState final = true ) = PowerSystems.Types.Dynamics.SteadyInitial "transient or steady-state model" type: enumeration(FreeInitial, FixedInitial, SteadyInitial, SteadyState)
11: system.refType:PARAM(min = PowerSystems.Types.ReferenceFrame.Synchron max = PowerSystems.Types.ReferenceFrame.Inertial final = true ) = PowerSystems.Types.ReferenceFrame.Synchron "reference frame (3-phase)" type: enumeration(Synchron, Inertial)
12: system.alpha0:PARAM(unit = "rad" final = true ) = 0.0 "phase angle" type: Real
13: system.f_lim:PARAM(unit = "Hz" final = true ) = {25.0, 100.0} "limit frequencies (for supervision of average frequency)" type: Real[2] [2]
14: system.f_nom:PARAM(unit = "Hz" final = true ) = 50.0 "nominal frequency" type: Real
15: system.f:PARAM(unit = "Hz" final = true ) = 50.0 "frequency if type is parameter, else initial frequency" type: Real
16: system.fType:PARAM(min = PowerSystems.Types.SystemFrequency.Parameter max = PowerSystems.Types.SystemFrequency.Average final = true ) = PowerSystems.Types.SystemFrequency.Parameter "system frequency type" type: enumeration(Parameter, Signal, Average)
17: fixedVoltageSource1.V:PARAM(unit = "V" nominal = 1000.0 ) = 10000.0 "value of constant voltage" type: Real
18: fixedVoltageSource1.definiteReference:PARAM(final = true ) = false "serve as definite root" type: Boolean
19: fixedVoltageSource1.potentialReference:PARAM(final = true ) = true "serve as potential root" type: Boolean
20: n:PARAM(final = true ) = 3 "number of loads" type: Integer
Simple Shared Equations (1, 1)
========================================
1/1 (0): for i in 1 : 3 loop
algorithm
branch(busBar1.terminal_p.theta, busBar1.terminal_n[i].theta);
; end for; [dynamic |0|0|0|0|]
########################################
dumpDAE
########################################
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.H:VARIABLE(flow=true unit = "s" ) "inertia constant" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.H = 0.0 [dynamic |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.w_H:VARIABLE(flow=true unit = "rad" ) "angular velocity, inertia-weighted" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.w_H = 0.0 [dynamic |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.h:VARIABLE(flow=false ) "Dummy potential-variable to balance flow-variable H" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.h = 0.0 [dynamic |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: system.receiveFreq.w_h:VARIABLE(flow=false ) "Dummy potential-variable to balance flow-variable w_H" type: Real
Equations (1, 1)
========================================
1/1 (1): system.receiveFreq.w_h = 0.0 [dynamic |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (13)
========================================
1: busBar1.p:VARIABLE(unit = "W" ) type: Real[1] [1]
2: busBar1.i:VARIABLE(start = busBar1.i_start unit = "A" nominal = 1.0 ) type: Real[1] [1]
3: busBar1.v:VARIABLE(start = busBar1.v_start unit = "V" nominal = 1000.0 ) type: Real[1] [1]
4: busBar1.terminal_n.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[3, 1] [3,1]
5: busBar1.terminal_n.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[3, 1] [3,1]
6: busBar1.terminal_p.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[1] [1]
7: busBar1.terminal_p.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[1] [1]
8: fixedLoad1.terminal.v:VARIABLE(flow=false start = fixedLoad1.v_start unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[3, 1] [3,1]
9: fixedLoad1.terminal.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[3, 1] [3,1]
10: fixedLoad1.p:VARIABLE(unit = "W" ) type: Real[3, 1] [3,1]
11: fixedVoltageSource1.p:VARIABLE(unit = "W" ) type: Real[1] [1]
12: fixedVoltageSource1.terminal.i:VARIABLE(flow=true unit = "A" nominal = 1.0 ) "current vector" type: Real[1] [1]
13: fixedVoltageSource1.terminal.v:VARIABLE(flow=false unit = "V" nominal = 1000.0 ) "voltage vector" type: Real[1] [1]
Equations (13, 13)
========================================
1/1 (3): busBar1.terminal_n.v = fixedLoad1.terminal.v [dynamic |0|0|0|0|]
2/4 (3): busBar1.terminal_n.i + fixedLoad1.terminal.i = 0.0 [dynamic |0|0|0|0|]
3/7 (1): fixedVoltageSource1.terminal.v = busBar1.terminal_p.v [dynamic |0|0|0|0|]
4/8 (1): fixedVoltageSource1.terminal.i + busBar1.terminal_p.i = 0.0 [dynamic |0|0|0|0|]
5/9 (1): fixedVoltageSource1.p = {fixedVoltageSource1.terminal.v * fixedVoltageSource1.terminal.i} [dynamic |0|0|0|0|]
6/10 (1): fixedVoltageSource1.terminal.v = {fixedVoltageSource1.V} [dynamic |0|0|0|0|]
7/11 (3): for $i in 1 : 3 loop
fixedLoad1[$i].p = {fixedLoad1[$i].terminal.v * fixedLoad1[$i].terminal.i}; end for; [dynamic |0|0|0|0|]
8/14 (3): for $i in 1 : 3 loop
fixedLoad1[$i].terminal.v * fixedLoad1[$i].terminal.i = fixedLoad1[$i].P; end for; [dynamic |0|0|0|0|]
9/17 (1): busBar1.v = busBar1.terminal_p.v [dynamic |0|0|0|0|]
10/18 (1): busBar1.i = busBar1.terminal_p.i [dynamic |0|0|0|0|]
11/19 (1): busBar1.p = {busBar1.v * busBar1.i} [dynamic |0|0|0|0|]
12/20 (1): for i in 1 : 1 loop
busBar1.terminal_p.i[i] = -sum(busBar1.terminal_n[:].i[i]); end for; [dynamic |0|0|0|0|]
13/21 (3): for i in 1 : 3 loop
busBar1.terminal_n[i].v = busBar1.terminal_p.v; end for; [dynamic |0|0|0|0|]
Matching
========================================
13 variables and equations
var 1 is solved in eqn 11
var 2 is solved in eqn 10
var 3 is solved in eqn 9
var 4 is solved in eqn 13
var 5 is solved in eqn 2
var 6 is solved in eqn 12
var 7 is solved in eqn 3
var 8 is solved in eqn 1
var 9 is solved in eqn 8
var 10 is solved in eqn 7
var 11 is solved in eqn 5
var 12 is solved in eqn 4
var 13 is solved in eqn 6
StrongComponents
========================================
{12:6}
Array {{10:2}}
Array {{6:13}}
Array {{4:12}}
Array {{5:11}}
Array {{3:7}}
Array {{9:3}}
Array {{11:1}}
{13:4}
Array {{1:8}}
{8:9}
Array {{2:5}}
{7:10}
unspecified partition
========================================
Variables (1)
========================================
1: fixedVoltageSource1.phi:VARIABLE(unit = "rad" ) type: Real
Equations (1, 1)
========================================
1/1 (1): fixedVoltageSource1.phi = 0.0 [binding |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (5)
========================================
1: system.omega_internal:VARIABLE(flow=false protected = true ) type: Real
2: system.omega:VARIABLE(start = 314.1592653589793 unit = "rad/s" ) type: Real
3: system.thetaRef:VARIABLE(unit = "rad" ) "angle of reference frame" type: Real
4: system.thetaRel:VARIABLE(unit = "rad" ) "angle relative to reference frame" type: Real
5: system.theta:VARIABLE(start = 0.0 unit = "rad" ) "system angle" type: Real
Equations (5, 5)
========================================
1/1 (1): system.omega_internal = system.thetaRef / time [dynamic |0|0|0|0|]
2/2 (1): system.omega = 314.1592653589793 [dynamic |0|0|0|0|]
3/3 (1): system.thetaRef = system.omega * time [dynamic |0|0|0|0|]
4/4 (1): system.thetaRel = system.theta - system.thetaRef [binding |0|0|0|0|]
5/5 (1): system.theta = system.thetaRef [binding |0|0|0|0|]
Matching
========================================
5 variables and equations
var 1 is solved in eqn 1
var 2 is solved in eqn 2
var 3 is solved in eqn 3
var 4 is solved in eqn 4
var 5 is solved in eqn 5
StrongComponents
========================================
{2:2}
{3:3}
{5:5}
{4:4}
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.V:VARIABLE(unit = "V" nominal = 1000.0 ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.V = busBar1.v[1] [binding |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.I:VARIABLE(unit = "A" nominal = 1.0 ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.I = busBar1.i[1] [binding |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: busBar1.phi:VARIABLE(unit = "rad" ) type: Real
Equations (1, 1)
========================================
1/1 (1): busBar1.phi = 0.0 [binding |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
{1:1}
unspecified partition
========================================
Variables (1)
========================================
1: system.initime:DISCRETE(unit = "s" ) type: Real
Equations (1, 1)
========================================
1/1 (1): when false then
system.initime := time;
end when; [dynamic |0|0|0|0|]
Matching
========================================
1 variables and equations
var 1 is solved in eqn 1
StrongComponents
========================================
WhenEquation {1:1}
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (20)
========================================
1: busBar1.n_n:PARAM(final = true ) = 3 type: Integer
2: busBar1.i_start:PARAM(unit = "A" nominal = 1.0 ) = {0.0} "Start value for current" type: Real[1] [1]
3: busBar1.v_start:PARAM(unit = "V" nominal = 1000.0 ) = {0.0} "Start value for voltage drop" type: Real[1] [1]
4: fixedLoad1.v_start:PARAM(unit = "V" nominal = 1000.0 ) = {1.0} "Start value for voltage drop" type: Real[3, 1] [3,1]
5: fixedLoad1.P:PARAM(unit = "W" ) = 1000000.0:1000000.0:3000000.0 "rms value of constant active power" type: Real[3] [3]
6: fixedLoad1.phi:PARAM(unit = "rad" ) = 0.1:0.1:0.3 "phase angle" type: Real[3] [3]
7: system.synRef:PARAM(final = true ) = true type: Boolean
8: system.w_nom:PARAM(unit = "rad/s" final = true ) = 314.1592653589793 "nom r.p.m." type: Real
9: system.omega_nom:PARAM(unit = "rad/s" final = true ) = 314.1592653589793 "nominal angular frequency" type: Real
10: system.dynType:PARAM(min = PowerSystems.Types.Dynamics.FreeInitial max = PowerSystems.Types.Dynamics.SteadyState final = true ) = PowerSystems.Types.Dynamics.SteadyInitial "transient or steady-state model" type: enumeration(FreeInitial, FixedInitial, SteadyInitial, SteadyState)
11: system.refType:PARAM(min = PowerSystems.Types.ReferenceFrame.Synchron max = PowerSystems.Types.ReferenceFrame.Inertial final = true ) = PowerSystems.Types.ReferenceFrame.Synchron "reference frame (3-phase)" type: enumeration(Synchron, Inertial)
12: system.alpha0:PARAM(unit = "rad" final = true ) = 0.0 "phase angle" type: Real
13: system.f_lim:PARAM(unit = "Hz" final = true ) = {25.0, 100.0} "limit frequencies (for supervision of average frequency)" type: Real[2] [2]
14: system.f_nom:PARAM(unit = "Hz" final = true ) = 50.0 "nominal frequency" type: Real
15: system.f:PARAM(unit = "Hz" final = true ) = 50.0 "frequency if type is parameter, else initial frequency" type: Real
16: system.fType:PARAM(min = PowerSystems.Types.SystemFrequency.Parameter max = PowerSystems.Types.SystemFrequency.Average final = true ) = PowerSystems.Types.SystemFrequency.Parameter "system frequency type" type: enumeration(Parameter, Signal, Average)
17: fixedVoltageSource1.V:PARAM(unit = "V" nominal = 1000.0 ) = 10000.0 "value of constant voltage" type: Real
18: fixedVoltageSource1.definiteReference:PARAM(final = true ) = false "serve as definite root" type: Boolean
19: fixedVoltageSource1.potentialReference:PARAM(final = true ) = true "serve as potential root" type: Boolean
20: n:PARAM(final = true ) = 3 "number of loads" type: Integer
Simple Shared Equations (1, 1)
========================================
1/1 (0): for i in 1 : 3 loop
algorithm
branch(busBar1.terminal_p.theta, busBar1.terminal_n[i].theta);
; end for; [dynamic |0|0|0|0|]
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedPowerSystemTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: VectorizedPowerSystemTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
VectorizedPowerSystemTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:54.747536650 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:54.867536535 +0100
@@ -645,11 +645,15 @@
branch(busBar1.terminal_p.theta, busBar1.terminal_n[i].theta);
; end for; [dynamic |0|0|0|0|]
record SimulationResult
-resultFile = "VectorizedPowerSystemTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedPowerSystemTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: VectorizedPowerSystemTest"
end SimulationResult;
-""
--6000000.0
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+VectorizedPowerSystemTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
Equation mismatch: omc-diff says:
Failed 'V' '"'
Line 650: Text differs:
expected: resultFile = "VectorizedPowerSystemTest_res.mat",
got: resultFile = "",
+ testVectorizedSolarSystem ... equation mismatch [time: 4]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-testVectorizedSolarSystem.mos
true
""
true
""
true
""
true
""
true
""
true
""
########################################
dumpDAE
########################################
unspecified partition
========================================
Variables (7)
========================================
1: grid.terms.v:VARIABLE(flow=false unit = "V" ) type: Real[1000] [1000]
2: grid.terms.i:VARIABLE(flow=true unit = "A" ) type: Real[1000] [1000]
3: grid.P_grid:VARIABLE(unit = "W" ) type: Real
4: plant.on:VARIABLE() "Plant status" type: Boolean[1000] [1000]
5: plant.P_solar:VARIABLE(unit = "W" ) "Solar power" type: Real[1000] [1000]
6: plant.term.v:VARIABLE(flow=false unit = "V" ) type: Real[1000] [1000]
7: plant.term.i:VARIABLE(flow=true unit = "A" ) type: Real[1000] [1000]
Equations (7, 7)
========================================
1/1 (1000): plant.term.v = grid.terms.v [dynamic |0|0|0|0|]
2/1001 (1000): plant.term.i + grid.terms.i = 0.0 [dynamic |0|0|0|0|]
3/2001 (1000): for $i in 1 : 1000 loop
plant[$i].term.v * plant[$i].term.i = if plant[$i].on then plant[$i].eta * plant[$i].P_solar else 0.0; end for; [dynamic |0|0|0|0|]
4/3001 (1000): for i in 1 : 1000 loop
grid.terms[i].v = grid.V; end for; [dynamic |0|0|0|0|]
5/4001 (1): 0.0 = grid.P_grid + grid.terms.v * grid.terms.i [dynamic |0|0|0|0|]
6/4002 (1000): plant.P_solar = 100.0:100.0:100000.0 [binding |0|0|0|0|]
7/5002 (1000): plant.on = true [binding |0|0|0|0|]
no matching
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (4)
========================================
1: n:PARAM(final = true ) = 1000 type: Integer
2: plant.eta:PARAM() = 0.9 "Efficiency" type: Real[1000] [1000]
3: grid.n:PARAM(final = true ) = 1000 type: Integer
4: grid.V:PARAM(unit = "V" ) = 1000.0 type: Real
########################################
dumpDAE
########################################
unspecified partition
========================================
Variables (7)
========================================
1: grid.terms.v:VARIABLE(flow=false unit = "V" ) type: Real[1000] [1000]
2: grid.terms.i:VARIABLE(flow=true unit = "A" ) type: Real[1000] [1000]
3: grid.P_grid:VARIABLE(unit = "W" ) type: Real
4: plant.on:VARIABLE() "Plant status" type: Boolean[1000] [1000]
5: plant.P_solar:VARIABLE(unit = "W" ) "Solar power" type: Real[1000] [1000]
6: plant.term.v:VARIABLE(flow=false unit = "V" ) type: Real[1000] [1000]
7: plant.term.i:VARIABLE(flow=true unit = "A" ) type: Real[1000] [1000]
Equations (7, 7)
========================================
1/1 (1000): plant.term.v = grid.terms.v [dynamic |0|0|0|0|]
2/1001 (1000): plant.term.i + grid.terms.i = 0.0 [dynamic |0|0|0|0|]
3/2001 (1000): for $i in 1 : 1000 loop
plant[$i].term.v * plant[$i].term.i = if plant[$i].on then plant[$i].eta * plant[$i].P_solar else 0.0; end for; [dynamic |0|0|0|0|]
4/3001 (1000): for i in 1 : 1000 loop
grid.terms[i].v = grid.V; end for; [dynamic |0|0|0|0|]
5/4001 (1): grid.P_grid = -grid.terms.v * grid.terms.i [dynamic |0|0|0|0|]
6/4002 (1000): plant.P_solar = 100.0:100.0:100000.0 [binding |0|0|0|0|]
7/5002 (1000): plant.on = true [binding |0|0|0|0|]
Matching
========================================
7 variables and equations
var 1 is solved in eqn 4
var 2 is solved in eqn 2
var 3 is solved in eqn 5
var 4 is solved in eqn 7
var 5 is solved in eqn 6
var 6 is solved in eqn 1
var 7 is solved in eqn 3
StrongComponents
========================================
Array {{7:4}}
Array {{6:5}}
{4:1}
Array {{1:6}}
{3:7}
Array {{2:2}}
{5:3}
BackendDAEType: simulation
Known variables only depending on parameters and constants - globalKnownVars (4)
========================================
1: grid.V:PARAM(unit = "V" ) = 1000.0 type: Real
2: grid.n:PARAM(final = true ) = 1000 type: Integer
3: plant.eta:PARAM() = 0.9 "Efficiency" type: Real[1000] [1000]
4: n:PARAM(final = true ) = 1000 type: Integer
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedSolarSystemTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: VectorizedSolarSystemTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
VectorizedSolarSystemTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:54.894203176 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:45:58.727532690 +0100
@@ -125,11 +125,15 @@
3: plant.eta:PARAM() = 0.9 "Efficiency" type: Real[1000] [1000]
4: n:PARAM(final = true ) = 1000 type: Integer
record SimulationResult
-resultFile = "VectorizedSolarSystemTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'VectorizedSolarSystemTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: VectorizedSolarSystemTest"
end SimulationResult;
-""
-45045000.0
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+VectorizedSolarSystemTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
Equation mismatch: omc-diff says:
Failed 'V' '"'
Line 130: Text differs:
expected: resultFile = "VectorizedSolarSystemTest_res.mat",
got: resultFile = "",
+ trapezoidTest ... equation mismatch [time: 3]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-trapezoidTest.mos
true
true
""
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 20.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'TrapezoidTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: TrapezoidTest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
TrapezoidTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:45:58.757532659 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:46:01.060863596 +0100
@@ -2,15 +2,19 @@
true
""
true
""
record SimulationResult
-resultFile = "TrapezoidTest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 20.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'TrapezoidTest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: TrapezoidTest"
end SimulationResult;
-1.0
-5.0
-1.0
-5.0
-1.0
-""
+
+
+
+
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+TrapezoidTest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
Equation mismatch: omc-diff says:
Failed 'T' '"'
Line 7: Text differs:
expected: resultFile = "TrapezoidTest_res.mat",
got: resultFile = "",
+ negatedParameter.mos ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/log-negatedParameter.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'negatedParamtest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: negatedParamtest"
end SimulationResult;
"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
negatedParamtest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
"
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-expected 2019-11-28 12:46:01.090863564 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/equations-got 2019-11-28 12:46:01.180863468 +0100
@@ -1,12 +1,16 @@
true
true
""
record SimulationResult
-resultFile = "negatedParamtest_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'negatedParamtest', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: negatedParamtest"
end SimulationResult;
--1.0
-""
-1.0
+
+"Error: Error building simulator. Build log: make[2]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+negatedParamtest.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[2]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[2]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime'
+"
+
""
Equation mismatch: omc-diff says:
Failed 'n' '"'
Line 5: Text differs:
expected: resultFile = "negatedParamtest_res.mat",
got: resultFile = "",
== 24 out of 24 tests failed [openmodelica/cppruntime, time: 26]
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom"
Running tests...
OPENMODELICAHOME=
+ Modelica.Electrical.Analog.Examples.CauerLowPassSC_HPCOM_Levelfix_pThreads_memoryOpt... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/log-Modelica.Electrical.Analog.Examples.CauerLowPassSC_levelfix_pthreads_memory.mos
"\"true
\"
OpenModelicaModelTesting.SimulationRuntime.Cpp
\"mat\"
true
"
""
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Electrical.Analog.Examples.CauerLowPassSC
600
{"R4.Capacitor1.v","R5.Capacitor1.v","R8.Capacitor1.v","R9.Capacitor1.v","R1.Capacitor1.v","R2.Capacitor1.v","R3.Capacitor1.v","Rp1.Capacitor1.v","R7.Capacitor1.v","R10.Capacitor1.v","R11.Capacitor1.v","C3.v","C7.v","C1.v","C4.v","C8.v"}
true
""
true
""
readCalcTimesFromFile: No valid profiling-file found.
Warning: The costs have been estimated. Maybe Modelica.Electrical.Analog.Examples.CauerLowPassSC_eqs_prof-file is missing.
Using fixed level Scheduler (experimental) for the DAE system
Using fixed level Scheduler (experimental) for the ODE system
Using fixed level Scheduler (experimental) for the ZeroFunc system
Creating optimized cache map for fixed level scheduler
HpcOm is still under construction.
Simulation options: startTime = 0.0, stopTime = 60.0, numberOfIntervals = 1500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Electrical.Analog.Examples.CauerLowPassSC', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Electrical.Analog.Examples.CauerLowPassSCError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
Modelica.Electrical.Analog.Examples.CauerLowPassSC.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
+ Modelica.Electrical.Analog.Examples.CauerLowPassSC_HPCOM_Level_OMP_measureTime ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/log-Modelica.Electrical.Analog.Examples.CauerLowPassSC_level_omp_measureTime.mos
true
""
"\"true
\"
OpenModelicaModelTesting.SimulationRuntime.Cpp
\"mat\"
true
"
""
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Electrical.Analog.Examples.CauerLowPassSC
600
{"R4.Capacitor1.v","R5.Capacitor1.v","R8.Capacitor1.v","R9.Capacitor1.v","R1.Capacitor1.v","R2.Capacitor1.v","R3.Capacitor1.v","Rp1.Capacitor1.v","R7.Capacitor1.v","R10.Capacitor1.v","R11.Capacitor1.v","C3.v","C7.v","C1.v","C4.v","C8.v"}
true
""
entire read fails
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 10.0, numberOfIntervals = 1500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Electrical.Analog.Examples.CauerLowPassSC', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: Modelica.Electrical.Analog.Examples.CauerLowPassSC"
end SimulationResult;
true
true
""
true
""
Using json-file
HpcOmTaskGraph.getCriticalPath_1 failed
HpcOmTaskGraph.getCriticalPath_1 failed
getCriticalPaths failed!
Using level Scheduler for the DAE system
Using level Scheduler for the ODE system
Using level Scheduler for the ZeroFunc system
HpcOmTaskGraph.getCriticalPath_1 failed
getCriticalPaths failed!
HpcOm is still under construction.
Simulation options: startTime = 0.0, stopTime = 60.0, numberOfIntervals = 1500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Electrical.Analog.Examples.CauerLowPassSC', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Electrical.Analog.Examples.CauerLowPassSCError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
Modelica.Electrical.Analog.Examples.CauerLowPassSC.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
+ Modelica.Electrical.Spice3.Examples.CoupledInductors_HPCOM_Level_OMP ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/log-Modelica.Electrical.Spice3.Examples.CoupledInductors_level_omp.mos
"\"true
\"
OpenModelicaModelTesting.SimulationRuntime.Cpp
\"mat\"
true
"
""
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Electrical.Spice3.Examples.CoupledInductors
80
{"L1.iinternal","L2.iinternal","C1.v","L3.iinternal","C2.v"}
true
""
true
""
readCalcTimesFromFile: No valid profiling-file found.
Warning: The costs have been estimated. Maybe Modelica.Electrical.Spice3.Examples.CoupledInductors_eqs_prof-file is missing.
Using level Scheduler for the DAE system
Using level Scheduler for the ODE system
Using level Scheduler for the ZeroFunc system
HpcOm is still under construction.
Simulation options: startTime = 0.0, stopTime = 0.2, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Electrical.Spice3.Examples.CoupledInductors', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Electrical.Spice3.Examples.CoupledInductorsError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
Modelica.Electrical.Spice3.Examples.CoupledInductors.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
+ Modelica.Electrical.Spice3.Examples.CoupledInductors_HPCOM_List_pThreads_spin ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/log-Modelica.Electrical.Spice3.Examples.CoupledInductors_list_pthreads_spin.mos
"\"true
\"
OpenModelicaModelTesting.SimulationRuntime.Cpp
\"mat\"
true
"
""
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Electrical.Spice3.Examples.CoupledInductors
80
{"L1.iinternal","L2.iinternal","C1.v","L3.iinternal","C2.v"}
true
""
true
""
readCalcTimesFromFile: No valid profiling-file found.
Warning: The costs have been estimated. Maybe Modelica.Electrical.Spice3.Examples.CoupledInductors_eqs_prof-file is missing.
Using list Scheduler for the DAE system
Using list Scheduler for the ODE system
Using list Scheduler for the ZeroFunc system
There is no parallel potential in the ODE system model!
The ODE system model is not big enough to perform an effective parallel simulation!
HpcOm is still under construction.
Simulation options: startTime = 0.0, stopTime = 0.2, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Electrical.Spice3.Examples.CoupledInductors', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Electrical.Spice3.Examples.CoupledInductorsError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
Modelica.Electrical.Spice3.Examples.CoupledInductors.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom'
== 4 out of 4 tests failed [openmodelica/cppruntime/hpcom, time: 10]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0"
Running tests...
OPENMODELICAHOME=
+ DIC_FMU1_CPP ... equation mismatch [time: 1]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/log-DIC_FMU1_CPP.mos
true
""
true
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
DIC_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
"
true
""
true
""
""
"Error: File not Found: DIC.fmu.
"
false
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIC_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Simulation Failed. Model: DIC_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/equations-expected 2019-11-28 12:46:12.010851166 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/equations-got 2019-11-28 12:46:13.880848873 +0100
@@ -1,26 +1,29 @@
true
""
true
-"DIC.fmu"
""
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
+DIC_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
+"
true
""
true
""
-"DIC_me_FMU.mo"
""
-true
+"Error: File not Found: DIC.fmu.
+"
+false
""
record SimulationResult
-resultFile = "DIC_me_FMU_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIC_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method.
-LOG_SUCCESS | info | The simulation finished successfully.
-"
+messages = "Simulation Failed. Model: DIC_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
-0.0
-1.0
-0.0
--0.9999999999999998
--1.397676419045979e-11
+
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'D' '"'
Line 4: Text differs:
expected: "DIC.fmu"
got: ""
+ Crane_FMI_1_0_CPP ... equation mismatch [time: 3]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/log-Crane_FMU1_CPP.mos
true
""
true
""
true
""
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
cranes_crane_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
"
true
""
""
"Error: File not Found: cranes_crane.fmu.
"
false
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 150, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'cranes_crane_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Simulation Failed. Model: cranes_crane_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/equations-expected 2019-11-28 12:46:13.907515507 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/1.0/equations-got 2019-11-28 12:46:16.634178742 +0100
@@ -2,28 +2,26 @@
""
true
""
true
""
-"cranes_crane.fmu"
""
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
+cranes_crane_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0'
+"
true
""
-"cranes_crane_me_FMU.mo"
""
-true
+"Error: File not Found: cranes_crane.fmu.
+"
+false
""
record SimulationResult
-resultFile = "cranes_crane_me_FMU_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 150, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'cranes_crane_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method.
-LOG_SUCCESS | info | The simulation finished successfully.
-"
+messages = "Simulation Failed. Model: cranes_crane_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
-"[openmodelica/cppruntime/fmu/modelExchange/1.0/cranes_crane_me_FMU.mo:793:3-793:76:writable] Warning: Parameter world_label2 has no value, and is fixed during initialization (fixed=true), using available start value (start="y") as default value.
-[openmodelica/cppruntime/fmu/modelExchange/1.0/cranes_crane_me_FMU.mo:792:3-792:78:writable] Warning: Parameter world_label1 has no value, and is fixed during initialization (fixed=true), using available start value (start="x") as default value.
-[openmodelica/cppruntime/fmu/modelExchange/1.0/cranes_crane_me_FMU.mo:791:3-791:80:writable] Warning: Parameter fixedTranslation_shapeType has no value, and is fixed during initialization (fixed=true), using available start value (start="cylinder") as default value.
-[openmodelica/cppruntime/fmu/modelExchange/1.0/cranes_crane_me_FMU.mo:790:3-790:73:writable] Warning: Parameter bodyShape_shapeType has no value, and is fixed during initialization (fixed=true), using available start value (start="cylinder") as default value.
-[openmodelica/cppruntime/fmu/modelExchange/1.0/cranes_crane_me_FMU.mo:789:3-789:90:writable] Warning: Parameter bodyShape_frameTranslation_shapeType has no value, and is fixed during initialization (fixed=true), using available start value (start="cylinder") as default value.
-"
-0.9493545676148092
-0.3948240567431445
+""
+
+
Equation mismatch: omc-diff says:
Failed 'c' '"'
Line 7: Text differs:
expected: "cranes_crane.fmu"
got: ""
== 2 out of 2 tests failed [openmodelica/cppruntime/fmu/modelExchange/1.0, time: 4]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/1.0"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0"
Running tests...
OPENMODELICAHOME=
+ DIC_FMU2_CPP ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-DIC_FMU2_CPP.mos
true
""
true
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
DIC_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
true
""
""
"Error: File not Found: DIC.fmu.
"
false
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIC_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Simulation Failed. Model: DIC_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:16.707511982 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:18.670842778 +0100
@@ -1,22 +1,27 @@
true
""
true
-"DIC.fmu"
""
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+DIC_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+"
true
""
-"DIC_me_FMU.mo"
""
-true
+"Error: File not Found: DIC.fmu.
+"
+false
""
record SimulationResult
-resultFile = "DIC_me_FMU_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DIC_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Simulation Failed. Model: DIC_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
-0.0
-1.0
-0.0
--0.9999999980000002
--4.048065787457232e-07
+
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'D' '"'
Line 4: Text differs:
expected: "DIC.fmu"
got: ""
+ testArrayEquations ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testArrayEquations.mos
true
""
true
""
true
""
true
""
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
ArrayEquationsTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
unzip: cannot find or open ArrayEquationsTest.fmu, ArrayEquationsTest.fmu.zip or ArrayEquationsTest.fmu.ZIP.
1
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:18.704176069 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:18.810842596 +0100
@@ -4,1122 +4,14 @@
""
true
""
true
""
-"ArrayEquationsTest.fmu"
""
-0
-"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+ArrayEquationsTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
+unzip: cannot find or open ArrayEquationsTest.fmu, ArrayEquationsTest.fmu.zip or ArrayEquationsTest.fmu.ZIP.
+1
+""
Equation mismatch: omc-diff says:
Failed 'A' '"'
Line 9: Text differs:
expected: "ArrayEquationsTest.fmu"
got: ""
+ testFMU2MatrixIO ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testFMU2MatrixIO.mos
true
""
true
""
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
MatrixIOTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
true
""
""
"Error: File not Found: MatrixIOTest.fmu.
"
false
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MatrixIOTest_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Simulation Failed. Model: MatrixIOTest_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:18.837509228 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:20.814173283 +0100
@@ -1,22 +1,27 @@
true
""
true
""
-"MatrixIOTest.fmu"
""
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+MatrixIOTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+"
true
""
-"MatrixIOTest_me_FMU.mo"
""
-true
+"Error: File not Found: MatrixIOTest.fmu.
+"
+false
""
record SimulationResult
-resultFile = "MatrixIOTest_me_FMU_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'MatrixIOTest_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Simulation Failed. Model: MatrixIOTest_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
-12.0
-12.0
--12.0
--12.0
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'M' '"'
Line 5: Text differs:
expected: "MatrixIOTest.fmu"
got: ""
+ testModelDescription ... equation mismatch [time: 0]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testModelDescription.mos
true
""
true
""
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
SIDTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
unzip: cannot find or open SIDTest.fmu, SIDTest.fmu.zip or SIDTest.fmu.ZIP.
1
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:20.844173243 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:20.940839781 +0100
@@ -1,128 +1,13 @@
true
""
true
""
-"SIDTest.fmu"
""
-0
-"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+SIDTest_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
+unzip: cannot find or open SIDTest.fmu, SIDTest.fmu.zip or SIDTest.fmu.ZIP.
+1
+""
Equation mismatch: omc-diff says:
Failed 'S' '"'
Line 5: Text differs:
expected: "SIDTest.fmu"
got: ""
+ testClockDescription ... equation mismatch [time: 1]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testClockDescription.mos
true
""
true
""
""
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
SubClocks_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
unzip: cannot find or open SubClocks.fmu, SubClocks.fmu.zip or SubClocks.fmu.ZIP.
1
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:20.967506412 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:21.060839621 +0100
@@ -1,114 +1,13 @@
true
""
true
""
-"SubClocks.fmu"
""
-0
-"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+SubClocks_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
+unzip: cannot find or open SubClocks.fmu, SubClocks.fmu.zip or SubClocks.fmu.ZIP.
+1
+""
Equation mismatch: omc-diff says:
Failed 'S' '"'
Line 5: Text differs:
expected: "SubClocks.fmu"
got: ""
+ testCSTR ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testCSTR.mos
true
true
true
"Notification: Automatically loaded package Modelica 3.2.2 due to uses annotation.
Notification: Automatically loaded package Complex 3.2.2 due to uses annotation.
Notification: Automatically loaded package ModelicaServices 3.2.2 due to uses annotation.
"
true
""
true
""
""
"[openmodelica/cppruntime/fmu/modelExchange/2.0/CSTR.mo:24:3-28:72:writable] Warning: Variable cA has attribute stateSelect=StateSelect.always, but was selected as a continuous variable.
[openmodelica/cppruntime/fmu/modelExchange/2.0/CSTR.mo:24:3-28:72:writable] Warning: Variable $outputAlias_cA.$pDERFMIDER.dummyVarFMIDER has attribute stateSelect=StateSelect.always, but was selected as a continuous variable.
Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
CSTRModel_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
unzip: cannot find or open CSTRModel.fmu, CSTRModel.fmu.zip or CSTRModel.fmu.ZIP.
1
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:21.084172923 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:23.304169915 +0100
@@ -7,509 +7,16 @@
"
true
""
true
""
-"CSTRModel.fmu"
+""
"[openmodelica/cppruntime/fmu/modelExchange/2.0/CSTR.mo:24:3-28:72:writable] Warning: Variable cA has attribute stateSelect=StateSelect.always, but was selected as a continuous variable.
[openmodelica/cppruntime/fmu/modelExchange/2.0/CSTR.mo:24:3-28:72:writable] Warning: Variable $outputAlias_cA.$pDERFMIDER.dummyVarFMIDER has attribute stateSelect=StateSelect.always, but was selected as a continuous variable.
+Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+CSTRModel_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
-0
-"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-"
+unzip: cannot find or open CSTRModel.fmu, CSTRModel.fmu.zip or CSTRModel.fmu.ZIP.
+1
+""
Equation mismatch: omc-diff says:
Failed 'C' '"'
Line 12: Text differs:
expected: "CSTRModel.fmu"
got: ""
+ testDrumBoiler ... equation mismatch [time: 7]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/log-testDrumBoiler.mos
true
""
true
""
true
""
true
""
""
"Warning: The model contains alias variables with conflicting start and/or nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
DrumBoilerModel_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
unzip: cannot find or open DrumBoilerModel.fmu, DrumBoilerModel.fmu.zip or DrumBoilerModel.fmu.ZIP.
1
""
""
"Error: File not Found: DrumBoilerModel.fmu.
"
false
""
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 100.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DrumBoilerModel_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-override=q_F=10,Y_Valve=1'",
messages = "Simulation Failed. Model: DrumBoilerModel_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-expected 2019-11-28 12:46:23.334169874 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/fmu/modelExchange/2.0/equations-got 2019-11-28 12:46:30.950825713 +0100
@@ -4,4038 +4,36 @@
""
true
""
true
""
-"DrumBoilerModel.fmu"
+""
"Warning: The model contains alias variables with conflicting start and/or nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
+Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
+DrumBoilerModel_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0'
"
-0
-"
-
-
-
-
-
-
--
-
-
-
-
-
-
-
-
-
-
--
-
-
-
-
-
-
-
-
-
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-"
-"DrumBoilerModel_me_FMU.mo"
+unzip: cannot find or open DrumBoilerModel.fmu, DrumBoilerModel.fmu.zip or DrumBoilerModel.fmu.ZIP.
+1
""
-true
+""
+"Error: File not Found: DrumBoilerModel.fmu.
+"
+false
""
true
""
record SimulationResult
-resultFile = "DrumBoilerModel_me_FMU_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 100.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'DrumBoilerModel_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-override=q_F=10,Y_Valve=1'",
-messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method.
-LOG_SUCCESS | info | The simulation finished successfully.
-"
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 100.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'DrumBoilerModel_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-override=q_F=10,Y_Valve=1'",
+messages = "Simulation Failed. Model: DrumBoilerModel_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
-10.0
-1.0
-1.066186961478094
-1.132373922956188
--16.62186178224934
-101.4102128671589
-66.98717518863343
--1.132373922956188
+
+
+
+
+
+
+
+
Equation mismatch: omc-diff says:
Failed 'D' '"'
Line 9: Text differs:
expected: "DrumBoilerModel.fmu"
got: ""
== 7 out of 7 tests failed [openmodelica/cppruntime/fmu/modelExchange/2.0, time: 14]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/fmu/modelExchange/2.0"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0"
Running tests...
OPENMODELICAHOME=
+ Crane_HPCOM_FMI_1_0_CPP_HPCOM ... equation mismatch [time: 3]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0/log-Crane_FMU1_CPP_HPCOM.mos
true
""
true
""
true
""
true
"Warning: Requested package Modelica of version 3.2.1, but this package was already loaded with version 3.2.3. You might experience problems if these versions are incompatible.
Notification: Skipped loading package Modelica_DeviceDrivers (1.2) using MODELICAPATH /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../lib/omlibrary (uses-annotation may be wrong).
"
readCalcTimesFromFile: No valid profiling-file found.
Warning: The costs have been estimated. Maybe cranes_crane_eqs_prof-file is missing.
Using level Scheduler for the DAE system
Using level Scheduler for the ODE system
Using level Scheduler for the ZeroFunc system
HpcOm is still under construction.
""
"Warning: Requested package Modelica of version 3.2.1, but this package was already loaded with version 3.2.3. You might experience problems if these versions are incompatible.
Notification: Automatically loaded package Modelica_DeviceDrivers 1.7.1 due to uses annotation.
Notification: Automatically loaded package Modelica_Synchronous 0.93.0 due to uses annotation.
Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0'
cranes_crane_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0'
"
true
""
true
""
""
"Error: File not Found: cranes_crane.fmu.
"
false
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 150, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'cranes_crane_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Simulation Failed. Model: cranes_crane_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0/equations-expected 2019-11-28 12:46:31.024158939 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0/equations-got 2019-11-28 12:46:34.607486900 +0100
@@ -3,30 +3,40 @@
true
""
true
""
true
-""
+"Warning: Requested package Modelica of version 3.2.1, but this package was already loaded with version 3.2.3. You might experience problems if these versions are incompatible.
+Notification: Skipped loading package Modelica_DeviceDrivers (1.2) using MODELICAPATH /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../lib/omlibrary (uses-annotation may be wrong).
+"
readCalcTimesFromFile: No valid profiling-file found.
Warning: The costs have been estimated. Maybe cranes_crane_eqs_prof-file is missing.
Using level Scheduler for the DAE system
Using level Scheduler for the ODE system
Using level Scheduler for the ZeroFunc system
HpcOm is still under construction.
-"SimCode: The model cranes.crane has been translated to FMU"
""
+"Warning: Requested package Modelica of version 3.2.1, but this package was already loaded with version 3.2.3. You might experience problems if these versions are incompatible.
+Notification: Automatically loaded package Modelica_DeviceDrivers 1.7.1 due to uses annotation.
+Notification: Automatically loaded package Modelica_Synchronous 0.93.0 due to uses annotation.
+Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0'
+cranes_crane_FMU.makefile:19: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0'
+"
true
""
true
""
-"cranes_crane_me_FMU.mo"
""
-true
+"Error: File not Found: cranes_crane.fmu.
+"
+false
""
record SimulationResult
-resultFile = "cranes_crane_me_FMU_res.mat",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 150, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'cranes_crane_me_FMU', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Simulation Failed. Model: cranes_crane_me_FMU does not exist! Please load it first before simulation."
end SimulationResult;
""
-0.9493545676148136
-0.3948240567413477
+
+
Equation mismatch: omc-diff says:
Failed '"' 'W'
Line 8: Text differs:
expected: ""
got: "Warning: Requested package Modelica of version
== 1 out of 1 tests failed [openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0, time: 3]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hpcom/fmu/modelExchange/1.0"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/staticLinking"
Running tests...
OPENMODELICAHOME=
No test files given at command line!
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/staticLinking"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/genDebugSymbols"
Running tests...
OPENMODELICAHOME=
+ Modelica.Fluid.Examples.BranchingDynamicPipes_Debug_Symbols_CPP ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/genDebugSymbols/log-Modelica.Fluid.Examples.BranchingDynamicPipes_genDebugSymbols.mos
"true
"
""
OpenModelicaModelTesting.SimulationRuntime.Cpp
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Fluid.Examples.BranchingDynamicPipes
600
"mat"
{"pipe1.mediums[1].p","pipe1.mediums[1].Xi[1]","pipe1.mediums[1].T","pipe1.mediums[2].p","pipe1.mediums[2].Xi[1]","pipe1.mediums[2].T","pipe1.mediums[3].p","pipe1.mediums[3].Xi[1]","pipe1.mediums[3].T","pipe1.mediums[4].p","pipe1.mediums[4].Xi[1]","pipe1.mediums[4].T","pipe1.mediums[5].p","pipe1.mediums[5].Xi[1]","pipe1.mediums[5].T","pipe1.flowModel.m_flows[1]","pipe1.flowModel.m_flows[2]","pipe1.flowModel.m_flows[3]","pipe1.flowModel.m_flows[4]","pipe1.flowModel.m_flows[5]","pipe2.mediums[1].p","pipe2.mediums[1].Xi[1]","pipe2.mediums[1].T","pipe2.mediums[2].p","pipe2.mediums[2].Xi[1]","pipe2.mediums[2].T","pipe2.mediums[3].p","pipe2.mediums[3].Xi[1]","pipe2.mediums[3].T","pipe2.mediums[4].p","pipe2.mediums[4].Xi[1]","pipe2.mediums[4].T","pipe2.mediums[5].Xi[1]","pipe2.mediums[5].T","pipe2.flowModel.m_flows[1]","pipe2.flowModel.m_flows[2]","pipe2.flowModel.m_flows[3]","pipe2.flowModel.m_flows[4]","pipe3.mediums[1].p","pipe3.mediums[1].Xi[1]","pipe3.mediums[1].T","pipe3.mediums[2].p","pipe3.mediums[2].Xi[1]","pipe3.mediums[2].T","pipe3.mediums[3].p","pipe3.mediums[3].Xi[1]","pipe3.mediums[3].T","pipe3.mediums[4].p","pipe3.mediums[4].Xi[1]","pipe3.mediums[4].T","pipe3.mediums[5].Xi[1]","pipe3.mediums[5].T","pipe3.flowModel.m_flows[1]","pipe3.flowModel.m_flows[2]","pipe3.flowModel.m_flows[3]","pipe3.flowModel.m_flows[4]","pipe3.flowModel.m_flows[5]","pipe4.mediums[1].p","pipe4.mediums[1].Xi[1]","pipe4.mediums[1].T","pipe4.mediums[2].p","pipe4.mediums[2].Xi[1]","pipe4.mediums[2].T","pipe4.mediums[3].p","pipe4.mediums[3].Xi[1]","pipe4.mediums[3].T","pipe4.mediums[4].p","pipe4.mediums[4].Xi[1]","pipe4.mediums[4].T","pipe4.mediums[5].p","pipe4.mediums[5].Xi[1]","pipe4.mediums[5].T","pipe4.flowModel.m_flows[1]","pipe4.flowModel.m_flows[2]","pipe4.flowModel.m_flows[3]","pipe4.flowModel.m_flows[4]","pipe4.flowModel.m_flows[5]"}
true
""
Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Fluid.Examples.BranchingDynamicPipes', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Fluid.Examples.BranchingDynamicPipesError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/genDebugSymbols'
Modelica.Fluid.Examples.BranchingDynamicPipes.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/genDebugSymbols'
== 1 out of 1 tests failed [openmodelica/cppruntime/genDebugSymbols, time: 14]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/genDebugSymbols"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hardcodedStartValues"
Running tests...
OPENMODELICAHOME=
+ Modelica.Fluid.Examples.BranchingDynamicPipes_Hardcoded_Start_Values_CPP ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/hardcodedStartValues/log-Modelica.Fluid.Examples.BranchingDynamicPipes_hardcodedStartValues.mos
"true
"
""
OpenModelicaModelTesting.SimulationRuntime.Cpp
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Fluid.Examples.BranchingDynamicPipes
600
"mat"
{"pipe1.mediums[1].p","pipe1.mediums[1].Xi[1]","pipe1.mediums[1].T","pipe1.mediums[2].p","pipe1.mediums[2].Xi[1]","pipe1.mediums[2].T","pipe1.mediums[3].p","pipe1.mediums[3].Xi[1]","pipe1.mediums[3].T","pipe1.mediums[4].p","pipe1.mediums[4].Xi[1]","pipe1.mediums[4].T","pipe1.mediums[5].p","pipe1.mediums[5].Xi[1]","pipe1.mediums[5].T","pipe1.flowModel.m_flows[1]","pipe1.flowModel.m_flows[2]","pipe1.flowModel.m_flows[3]","pipe1.flowModel.m_flows[4]","pipe1.flowModel.m_flows[5]","pipe2.mediums[1].p","pipe2.mediums[1].Xi[1]","pipe2.mediums[1].T","pipe2.mediums[2].p","pipe2.mediums[2].Xi[1]","pipe2.mediums[2].T","pipe2.mediums[3].p","pipe2.mediums[3].Xi[1]","pipe2.mediums[3].T","pipe2.mediums[4].p","pipe2.mediums[4].Xi[1]","pipe2.mediums[4].T","pipe2.mediums[5].Xi[1]","pipe2.mediums[5].T","pipe2.flowModel.m_flows[1]","pipe2.flowModel.m_flows[2]","pipe2.flowModel.m_flows[3]","pipe2.flowModel.m_flows[4]","pipe3.mediums[1].p","pipe3.mediums[1].Xi[1]","pipe3.mediums[1].T","pipe3.mediums[2].p","pipe3.mediums[2].Xi[1]","pipe3.mediums[2].T","pipe3.mediums[3].p","pipe3.mediums[3].Xi[1]","pipe3.mediums[3].T","pipe3.mediums[4].p","pipe3.mediums[4].Xi[1]","pipe3.mediums[4].T","pipe3.mediums[5].Xi[1]","pipe3.mediums[5].T","pipe3.flowModel.m_flows[1]","pipe3.flowModel.m_flows[2]","pipe3.flowModel.m_flows[3]","pipe3.flowModel.m_flows[4]","pipe3.flowModel.m_flows[5]","pipe4.mediums[1].p","pipe4.mediums[1].Xi[1]","pipe4.mediums[1].T","pipe4.mediums[2].p","pipe4.mediums[2].Xi[1]","pipe4.mediums[2].T","pipe4.mediums[3].p","pipe4.mediums[3].Xi[1]","pipe4.mediums[3].T","pipe4.mediums[4].p","pipe4.mediums[4].Xi[1]","pipe4.mediums[4].T","pipe4.mediums[5].p","pipe4.mediums[5].Xi[1]","pipe4.mediums[5].T","pipe4.flowModel.m_flows[1]","pipe4.flowModel.m_flows[2]","pipe4.flowModel.m_flows[3]","pipe4.flowModel.m_flows[4]","pipe4.flowModel.m_flows[5]"}
true
""
Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Fluid.Examples.BranchingDynamicPipes', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Fluid.Examples.BranchingDynamicPipesError: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hardcodedStartValues'
Modelica.Fluid.Examples.BranchingDynamicPipes.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hardcodedStartValues'
== 1 out of 1 tests failed [openmodelica/cppruntime/hardcodedStartValues, time: 13]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/hardcodedStartValues"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat"
Running tests...
OPENMODELICAHOME=
+ Modelica.Blocks.Examples.BooleanNetwork1_none ... equation mismatch [time: 2]
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/outputFormat/log-Modelica.Blocks.Examples.BooleanNetwork1_none.mos
true
true
""
record SimulationResult
resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Blocks.Examples.BooleanNetwork1', options = '', outputFormat = 'empty', variableFilter = '.*', cflags = '', simflags = ''",
messages = "Failed to build model: Modelica.Blocks.Examples.BooleanNetwork1"
end SimulationResult;
"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
Modelica.Blocks.Examples.BooleanNetwork1.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
"
Equation mismatch: diff says:
--- /tmp/omc-rtest-andreak/openmodelica/cppruntime/outputFormat/equations-expected 2019-11-28 12:47:01.394108041 +0100
+++ /tmp/omc-rtest-andreak/openmodelica/cppruntime/outputFormat/equations-got 2019-11-28 12:47:03.310771094 +0100
@@ -1,10 +1,14 @@
true
true
""
record SimulationResult
-resultFile = "Modelica.Blocks.Examples.BooleanNetwork1_res.empty",
+resultFile = "",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Blocks.Examples.BooleanNetwork1', options = '', outputFormat = 'empty', variableFilter = '.*', cflags = '', simflags = ''",
-messages = ""
+messages = "Failed to build model: Modelica.Blocks.Examples.BooleanNetwork1"
end SimulationResult;
-""
+"Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
+Modelica.Blocks.Examples.BooleanNetwork1.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
+make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
+make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
+"
Equation mismatch: omc-diff says:
Failed 'M' '"'
Line 5: Text differs:
expected: resultFile = "Modelica.Blocks.Examples.BooleanNetwork
got: resultFile = "",
+ Modelica.Blocks.Examples.BooleanNetwork1_mat ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/outputFormat/log-Modelica.Blocks.Examples.BooleanNetwork1_mat.mos
"true
"
OpenModelicaModelTesting.SimulationRuntime.Cpp
"mat"
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Blocks.Examples.BooleanNetwork1
{"showValue4.showActive","showValue5.showActive","showValue6.showActive"}
Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Blocks.Examples.BooleanNetwork1', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Blocks.Examples.BooleanNetwork1Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
Modelica.Blocks.Examples.BooleanNetwork1.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
+ Modelica.Blocks.Examples.BooleanNetwork1_csv ... execution failed
==== Log /tmp/omc-rtest-andreak/openmodelica/cppruntime/outputFormat/log-Modelica.Blocks.Examples.BooleanNetwork1_csv.mos
"true
"
OpenModelicaModelTesting.SimulationRuntime.Cpp
"csv"
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Blocks.Examples.BooleanNetwork1
{"showValue4.showActive","showValue5.showActive","showValue6.showActive"}
Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'Modelica.Blocks.Examples.BooleanNetwork1', options = '', outputFormat = 'csv', variableFilter = '.*', cflags = '', simflags = ''
Error: Simulation did not produce a result-file
Errors: Failed to build model: Modelica.Blocks.Examples.BooleanNetwork1Error: Error building simulator. Build log: make[3]: Entering directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
Modelica.Blocks.Examples.BooleanNetwork1.makefile:4: /home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc: No such file or directory
make[3]: *** No rule to make target '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/build/bin/../include/omc/cpp/ModelicaLibraryConfig_gcc.inc'. Stop.
make[3]: Leaving directory '/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat'
== 3 out of 3 tests failed [openmodelica/cppruntime/outputFormat, time: 5]
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/outputFormat"
make[2]: ingresso nella directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/omedit"
Running tests...
OPENMODELICAHOME=
No test files given at command line!
make[2]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime/omedit"
make[1]: uscita dalla directory "/home/andreak/tmp/AUR/openmodelica-nocoin-git/src/openmodelica-nocoin-git/testsuite/openmodelica/cppruntime"