Opnsense

Loading /boot/defaults/loader.conf
|

                  ______  _____  _____
                 /  __  |/ ___ |/ __  |
                 | |  | | |__/ | |  | |___  ___ _ __  ___  ___
                 | |  | |  ___/| |  | / __|/ _ \ '_ \/ __|/ _ \
                 | |__| | |    | |  | \__ \  __/ | | \__ \  __/
                 |_____/|_|    |_| /__|___/\___|_| |_|___/\___|

 +=========================================+     @@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |  1. Boot Multi User [Enter]             |   @@@@@                    @@@@@
 |  2. Boot [S]ingle User                  |       @@@@@            @@@@@
 |  3. [Esc]ape to loader prompt           |    @@@@@@@@@@@       @@@@@@@@@@@
 |  4. Reboot                              |         \\\\\         /////
 |                                         |   ))))))))))))       (((((((((((
 |  Options:                               |         /////         \\\\\
 |  5. [K]ernel: kernel (1 of 2)           |    @@@@@@@@@@@       @@@@@@@@@@@
 |  6. Configure Boot [O]ptions...         |       @@@@@            @@@@@
 |                                         |   @@@@@                    @@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@
 +=========================================+
                                                  17.1  ``Eclectic Eagle''
/boot/kernel/kernel text=0x164e4a0 data=0x13f218+0x4c5ee8 syms=[0x8+0x170d00+0x8+0x188c92]
/boot/entropy size=0x1000
/boot/kernel/if_gre.ko size 0x6058 at 0x234e000
/boot/kernel/if_tap.ko size 0x75a8 at 0x2355000
/boot/kernel/pf.ko size 0x51298 at 0x235d000
/boot/kernel/carp.ko size 0xe778 at 0x23af000
/boot/kernel/if_bridge.ko size 0xe1e0 at 0x23be000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x6e40 at 0x23cd000
/boot/kernel/if_lagg.ko size 0x11078 at 0x23d4000
/boot/kernel/ng_UI.ko size 0x1638 at 0x23e6000
loading required module 'netgraph'
/boot/kernel/netgraph.ko size 0x160f8 at 0x23e8000
/boot/kernel/ng_async.ko size 0x3718 at 0x23ff000
/boot/kernel/ng_bpf.ko size 0x46b0 at 0x2403000
/boot/kernel/ng_bridge.ko size 0x4f30 at 0x2408000
/boot/kernel/ng_cisco.ko size 0x2ea0 at 0x240d000
/boot/kernel/ng_echo.ko size 0xf20 at 0x2410000
/boot/kernel/ng_eiface.ko size 0x33b0 at 0x2411000
/boot/kernel/ng_ether.ko size 0x46f8 at 0x2415000
/boot/kernel/ng_frame_relay.ko size 0x1d90 at 0x241a000
/boot/kernel/ng_hole.ko size 0x17e8 at 0x241c000
/boot/kernel/ng_iface.ko size 0x3988 at 0x241e000
/boot/kernel/ng_ksocket.ko size 0x6168 at 0x2422000
/boot/kernel/ng_l2tp.ko size 0x6648 at 0x2429000
/boot/kernel/ng_lmi.ko size 0x4000 at 0x2430000
/boot/kernel/ng_mppc.ko size 0x5ca8 at 0x2434000
loading required module 'rc4'
/boot/kernel/rc4.ko size 0xb38 at 0x243a000
/boot/kernel/ng_one2many.ko size 0x2ac8 at 0x243b000
/boot/kernel/ng_ppp.ko size 0x95c0 at 0x243e000
/boot/kernel/ng_pppoe.ko size 0x7548 at 0x2448000
/boot/kernel/ng_pptpgre.ko size 0x47a0 at 0x2450000
/boot/kernel/ng_rfc1490.ko size 0x25a0 at 0x2455000
/boot/kernel/ng_socket.ko size 0x60e8 at 0x2458000
/boot/kernel/ng_tee.ko size 0x21a0 at 0x245f000
/boot/kernel/ng_tty.ko size 0x2e98 at 0x2462000
/boot/kernel/ng_vjc.ko size 0x4498 at 0x2465000
/boot/kernel/ng_vlan.ko size 0x2fc0 at 0x246a000
/boot/kernel/if_enc.ko size 0x30a8 at 0x246d000
/boot/kernel/pflog.ko size 0x28d0 at 0x2471000
/boot/kernel/pfsync.ko size 0xcfe0 at 0x2474000
/boot/kernel/ng_car.ko size 0x33b0 at 0x2481000
/boot/kernel/ng_deflate.ko size 0x3718 at 0x2485000
/boot/kernel/ng_pipe.ko size 0x4f18 at 0x2489000
/boot/kernel/ng_pred1.ko size 0x3400 at 0x248e000
/boot/kernel/ng_tcpmss.ko size 0x2048 at 0x2492000
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p8 #0 e84bb9532(stable/17.1): Sun Mar 26 15:34:40 CEST 2017
    root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD HARDENING] procfs hardening: enabled
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: AMD GX-416RA SOC                                (1597.14-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x700f01  Family=0x16  Model=0x0  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4831838208 (4608 MB)
avail memory = 4085145600 (3895 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81149b90, 0) error 19
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 28 at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: f4:90:ea:10:1f:3f
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2000-0x201f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 32 at device 0.0 on pci2
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: f4:90:ea:10:1f:40
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 36 at device 0.0 on pci3
em2: Using MSIX interrupts with 3 vectors
em2: Ethernet address: f4:90:ea:10:1f:41
em2: netmap queues/slots: TX 1/1024, RX 1/1024
pcib4: <ACPI PCI-PCI bridge> irq 24 at device 2.5 on pci0
pci4: <ACPI PCI bus> on pcib4
em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x4000-0x401f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 40 at device 0.0 on pci4
em3: Using MSIX interrupts with 3 vectors
em3: Ethernet address: f4:90:ea:10:1f:42
em3: netmap queues/slots: TX 1/1024, RX 1/1024
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x5010-0x5017,0x5020-0x5023,0x5018-0x501f,0x5024-0x5027,0x5000-0x500f mem 0xf7f07000-0xf7f073ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf7f08000-0xf7f080ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD FCH USB Controller> mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD FCH USB 2.0 controller> mem 0xf7f09000-0xf7f090ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac0: <AMD Hudson-2 HDA Controller> mem 0xf7f00000-0xf7f03fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xf7f0a000-0xf7f0a0ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
ohci2: <AMD FCH USB Controller> mem 0xf7f06000-0xf7f06fff irq 18 at device 22.0 on pci0
usbus4 on ohci2
ehci2: <AMD FCH USB 2.0 controller> mem 0xf7f0b000-0xf7f0b0ff irq 17 at device 22.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci2
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen4.1: <AMD> at usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <AMD> at usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
mmcsd0: 16GB <SDHC SDU1  2.0 SN 4BBF7672 MFG 06/2016 by 116 J`> at mmc0 31.5MHz/4bit/65535-block
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1597137376 Hz quality 1000
Trying to mount root from ufs:/dev/ufs/opnsense [rw,noatime]...
uhub0: 4 ports with 4 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
Mounting filesystems...
tunefs: soft updates remains unchanged as enabled
tunefs: file system reloaded
uhub5: 2 ports with 2 removable, self powered
camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed
cam_lookup_pass: No such file or directory
cam_lookup_pass: either the pass driver isn't in your kernel
cam_lookup_pass: or mmcsd0 doesn't exist
** /dev/ufs/opnsense
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 7037905 free (4481 frags, 879178 blocks, 0.1% fragmentation)
** /dev/ufs/opnsense
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 7037905 free (4481 frags, 879178 blocks, 0.1% fragmentation)
uhub1: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
Setting up memory disks...done.
Configuring crash dump device: /dev/null
.ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.24/mach/CORE
32-bit compatibility ldconfig path:
done.
Starting configd.
rc.syshook(early): running zerotier
Starting zerotier.
Launching the init system...done.
Initializing............done.
Loading configuration...done.
Starting device manager...done.
Configuring login behaviour...done.

Default interfaces not found -- Running interface assignment option.

Press any key to start the manual interface assignment: 1

Valid interfaces are:
em0              f4:90:ea:10:1f:3f Intel(R) PRO/1000 Network Connection 7.6.1-k
em1              f4:90:ea:10:1f:40 Intel(R) PRO/1000 Network Connection 7.6.1-k
em2              f4:90:ea:10:1f:41 Intel(R) PRO/1000 Network Connection 7.6.1-k
em3              f4:90:ea:10:1f:42 Intel(R) PRO/1000 Network Connection 7.6.1-k

You now have the opportunity to configure VLANs.  If you don't require VLANs
for initial connectivity, say no here and use the GUI to configure VLANs later.

Do you want to set up VLANs now [y|n]? n


VLAN interfaces:

em0_vlan101     VLAN tag 101, parent interface em0
em0_vlan102     VLAN tag 102, parent interface em0
em0_vlan103     VLAN tag 103, parent interface em0
em0_vlan105     VLAN tag 105, parent interface em0
em0_vlan111     VLAN tag 111, parent interface em0

If you do not know the names of your interfaces, you may choose to use
auto-detection. In that case, disconnect all interfaces now before
hitting 'a' to initiate auto detection.

Enter the WAN interface name or 'a' for auto-detection: em1

Enter the LAN interface name or 'a' for auto-detection
NOTE: this enables full Firewalling/NAT mode.
(or nothing if finished): em0

Optional interface 1 description found: WAN2
Enter the Optional 1 interface name or 'a' for auto-detection
(or nothing if finished):

The interfaces will be assigned as follows:

WAN  -> em1
LAN  -> em0

Do you want to proceed [y|n]? y

Writing configuration...done.
Configuring loopback interface...done.
Configuring kernel modules...done.
Setting up extended sysctls...done.
Setting timezone...done.
Writing firmware setting...done.
Setting hostname: gw-opnsense.gateway.com
Generating /etc/hosts...done.
Starting syslog...done.
Creating OpenVPN instances...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring LAGG interfaces...done.
Configuring VLAN interfaces...done.
Configuring QinQ interfaces...done.
Configuring WAN interface...done.
Configuring LAN interface...done.
Syncing OpenVPN settings...route: route has not been found
route: route has not been found
done.
Generating /etc/resolv.conf...done.
Configuring firewall.route: route has not been found
.....done.
Setting up gateway monitors...done.
Starting web GUI...done.
Configuring OpenSSH...done.
Configuring CRON...done.
Setting up routes...done.
Starting Dnsmasq DNS...route: route has not been found
route: route has not been found
done.
Generating /etc/hosts...done.
Configuring firewall.route: route has not been found
.....done.
Starting SNMP daemon...done.
Starting NTP service...deferred.
Configuring IPsec VPN...route: route has not been found
route: route has not been found
route: route has not been found
route: route has not been found
done.
Generating RRD graphs...done.
Starting syslog...done.
Appliance specific options set.
dev.amdtemp.0.sensor_offset: 0 -> -10
Starting flowd.
Starting flowd_aggregate.
Starting monit.
Starting Monit 5.22.0 daemon with http interface at /var/run/monit.sock
Monit start delay set to 120s
Starting named.
setup em1
error : interface opt1 not found
error : interface opt2 not found
error : interface opt3 not found
error : interface opt4 not found
error : interface opt5 not found
error : interface opt6 not found
error : interface opt7 not found
setup enc0
ngctl: send msg: No such file or directory
ngctl: line 1: error in file
error : interface openvpn not found
eval: -ftp-proxy_opnsense_bootup_run: not found
osftpproxy is not running.
Starting osftpproxy.
osftpproxy is not running.
Starting osftpproxy.
Starting CRON...done.

*** gw-opnsense.gateway.com: OPNsense 17.1.6 (amd64/OpenSSL) ***

 LAN (em0)       -> v4: 172.16.96.1/24
 WAN (em1)       ->

FreeBSD/amd64 (gw-opnsense.gateway.com) (ttyu0)

login: