Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Welcome to Debian GNU/Linux 10 (buster)!
- File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based fi.
- Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway.
- /lib/systemd/system/dsi-display.service:3: Unknown lvalue 'after' in section 'Unit', ignoring
- [ 26.533780] random: systemd: uninitialized urandom read (16 bytes read)
- [ 26.543044] random: systemd: uninitialized urandom read (16 bytes read)
- [ OK ] Listening on initctl Compatibility Named Pipe.[ 26.550675] random: systemd: uninitialized urandom read (16 bytes read)
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Listening on Journal Socket.
- Starting Load Kernel Modules...
- Starting Nameserver information manager...
- Mounting Kernel Debug File System...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Mounting Huge Pages File System...
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- Starting Set the console keyboard layout...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- Starting Create list of re…odes for the current kernel...
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target 26.674107] EXT4-fs (sda1): re-mounted. Opts: data=ordered
- 39mPaths.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Reached target Remote File Systems.
- Mounting POSIX Message Queue File System...
- [ OK ] Reached target Swap.
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Started Load Kernel Modules.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Nameserver information manager.
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- Starting Create System Users...
- Starting Load/Save Random Seed...
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Set console font and keymap.
- [ 26.984252] systemd-journald[1903]: Received request to flush runtime journal from PID 1
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started udev Coldplug all Devices.
- Starting Helper to synchronize boot up for ifupdown...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- Starting Raise network interfaces...
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Initialization.
- [ 27.370087] qcom_adsp_pil adsp-pil: adsp-pil supply cx not found, using dummy regulator
- [ 27.377093] qcom_adsp_pil adsp-pil: adsp-pil supply px not found, using dummy regulator
- [ 27.390383] NET: Registered protocol family 42
- [ 27.394526] remoteproc remoteproc0: adsp-pil is available
- [ 27.398047] remoteproc remoteproc1: 2080000.remoteproc is available
- [ 27.413605] remoteproc remoteproc0: powering up adsp-pil
- [ 27.414716] remoteproc remoteproc1: powering up 2080000.remoteproc
- [ 27.420223] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
- [ 27.426292] remoteproc remoteproc1: Booting fw image mba.mbn, size 213888
- [ OK ] Listening on GPS (Global P…ioning System) Daemon Sockets.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ 27.509881] qcom-q6v5-pil 2080000.remoteproc: MBA booted, loading mpss
- Starting System Logging Service...
- [ OK ] Started DSI Display Service.
- Starting Reconfigure to make network manager work...
- Starting rng-tools.service...
- [ OK ] Started OTG Mode Switch for Type-C.
- Starting Restore /etc/reso… the ppp link was shut down...
- [ 27.625818] remoteproc remoteproc0: remote processor adsp-pil is now up
- [ OK ] Started Hardware RNG Entropy Gatherer Daemon.
- [ 27.638296] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@8 to group 2
- [ 27.645283] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@8: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.662657] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@9 to group 3
- [ 27.669557] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@9: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- Starting LSB: Load kernel …d to enable cpufreq scaling...
- [ 27.687469] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@10 to group 4
- [ 27.699322] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@10: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.721580] random: crng init done
- [ 27.728228] random: 7 urandom warning(s) missed due to ratelimiting
- [ 27.738957] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@11 to group 5
- Starting Initialize hardware monitoring sensor[ 27.745804] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@11: Linked as a consumer to 1600000.arm,sm6
- s...
- [ 27.766300] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@12 to group 6
- Starting Login Service...
- [ 27.786264] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@12: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- Starting Modem Manager...
- [ OK ] Started D-Bus System Message Bus.
- [ 27.821375] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@5 to group 7
- [ 27.830496] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@5: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.847031] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@6 to group 8
- [ 27.854776] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@6: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- Starting WPA supplicant...
- [ 27.874854] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@7 to group 9
- [ 27.887149] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@7: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- Starting Network Manager...
- [ 27.908266] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6core:4:3
- [ 27.910402] Bluetooth: Core ver 2.22
- [ 27.938839] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6afe:4:4
- [ 27.956833] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6asm:4:7
- [ 27.974586] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6adm:4:8
- [ OK ] Started Regular background program processing daemon.
- [ 27.998939] remoteproc remoteproc1: remote processor 2080000.remoteproc is now up
- [ OK ] Started QIPCRTR Name Service.
- [ OK ] Started Qualcomm remotefs service.
- Starting Disk Manager...
- [ OK ] Reached target System Time Synchronized.
- [ 28.063917] NET: Registered protocol family 31
- [ 28.082434] Bluetooth: HCI device and connection manager initialized
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ 28.113917] Bluetooth: HCI socket layer initialized
- [ OK ] Started Trigger anacron every hour.
- [ 28.134664] Bluetooth: L2CAP socket layer initialized
- [ 28.166606] Bluetooth: SCO socket layer initialized
- [ OK ] Started Run anacron jobs.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Reached target Timers.
- [ OK ] Started System Logging Service.
- [FAILED] Failed to start rng-tools.service.
- [ 28.260094] Bluetooth: HCI UART driver ver 2.3
- [ 28.267734] Bluetooth: HCI UART protocol H4 registered
- See 'systemctl status rng-tools.service' for details.
- [ 28.275886] Bluetooth: HCI UART protocol BCSP registered
- [ 28.278816] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.288325] Bluetooth: HCI UART protocol LL registered
- [ 28.297642] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.302168] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 28.302244] Bluetooth: HCI UART protocol QCA registered
- [ 28.311454] Bluetooth: hci0: ROME setup
- [ 28.319510] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.323595] media: Linux media interface: v0.10
- [ 28.324903] Bluetooth: hci0: Set UART speed to 3000000
- [ 28.331737] msm-snd-apq8096 sound: Error parsing OF data
- [ OK ] Started Restore /etc/resol…re the ppp link was shut down.
- [ OK ] Started Initialize hardware monitoring sensors.
- [ 28.514416] Linux video capture interface: v2.00
- [ 28.543242] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.551200] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.561207] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.568797] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.582151] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.592708] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.601017] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.611690] Mass Storage Function, version: 2009/09/11
- [ 28.622753] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.629857] LUN: removable file: (no medium)
- [ 28.631188] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.636898] LUN: removable file: /dev/sda2
- [ 28.662301] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.678668] Number of LUNs=1
- [ 28.686813] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.690170] Bluetooth: hci0: ROME controller version 0x00440302
- [ 28.692959] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
- [ 28.692964] g_mass_storage gadget: userspace failed to provide iSerialNumber
- [ 28.692967] g_mass_storage gadget: g_mass_storage ready
- [ 28.693403] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.701326] Bluetooth: hci0: ROME Downloading qca/rampatch_00440302.bin
- [ OK ] Found device /dev/ttyMSM0.
- [ 28.738271] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
- [ 28.738281] Bluetooth: hci0: Failed to request file: qca/rampatch_00440302.bin (-2)
- [ 28.738286] Bluetooth: hci0: Failed to download patch (-2)
- [ 28.739555] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability
- [ 28.769741] iommu: Adding device c00000.video-codec to group 10
- [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
- [ 28.790312] i2c-qcom-cci a0c000.cci: Master 0 error 0x08000000
- [ 28.793760] qcom-venus c00000.video-codec: Linked as a consumer to d40000.arm,smmu-venus
- [ 28.814158] i2c-qcom-cci a0c000.cci: master 0 queue 0 error -5
- [ 28.825485] i2c-qcom-cci a0c000.cci: cci i2c xfer error -5
- [ 28.860376] ov5645 5-003c: ov5645_write_reg_to: write reg error -5 on addr 0x3c: reg=0x3100, val=0x78
- [ 28.861286] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.880780] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.891642] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.891647] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.892862] ov5645 5-003c: could not change i2c address
- [ 28.908806] iommu: Adding device adsp-pil:smd-edge:apr:q6asm:dais to group 11
- [ 28.908940] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 28.910863] msm-snd-apq8096 sound: codec dai not found
- [ 28.910868] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.914187] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 28.915079] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 28.915205] ov5645 5-003c: could not power up OV5645
- [ 28.915502] ov5645: probe of 5-003c failed with error -5
- [ 29.034478] msm-snd-apq8096 sound: codec dai not found
- [ 29.038680] iommu: Adding device a34000.camss to group 12
- [ 29.040652] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.050243] qcom-camss a34000.camss: Linked as a consumer to da0000.arm,smmu
- [ 29.075261] msm-snd-apq8096 sound: codec dai not found
- [ 29.081707] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.092962] msm-snd-apq8096 sound: codec dai not found
- [ 29.099578] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.128395] msm-snd-apq8096 sound: codec dai not found
- [ 29.128400] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.163562] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.165394] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.176083] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.176114] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.184116] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.216159] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.218095] g_mass_storage gadget: high-speed config #1: Linux File-Backed Storage
- [ 29.223398] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.224598] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 29.224697] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
- [ 29.224735] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
- [ 29.228372] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
- [ 29.228376] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
- [ 29.229331] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
- [ 29.305742] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
- [ 29.352787] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
- [ 29.602055] wcd9335-slim 217:1a0:0:0: setting slimbus l-addr:ca, ea:217,1a0,0,0
- [ 29.610760] msm-snd-apq8096 sound: codec dai not found
- [ 29.619669] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.683430] msm-snd-apq8096 sound: codec dai not found
- [ 29.692492] wcd9335-slim 217:1a0:1:0: WCD9335 CODEC version is v2.0
- [ 29.701433] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.714390] wcd9335-slim 217:1a0:1:0: setting slimbus l-addr:cb, ea:217,1a0,1,0
- [ 29.727244] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: no source widget found for Playback
- [ 29.740562] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: Failed to add route Playback -> direct -> TX
- [ 29.794693] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 29.802682] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 29.810602] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 29.817278] msm-snd-apq8096 sound: i2s-hifi <-> HDMI mapping ok
- [ 29.823834] msm-snd-apq8096 sound: wcd9335_rx4 <-> SLIMBUS_6_RX mapping ok
- [ 29.830392] msm-snd-apq8096 sound: wcd9335_tx1 <-> SLIMBUS_0_TX mapping ok
- [ 29.838051] msm-snd-apq8096 sound: ASoC: no DMI vendor name!
- [ 29.886979] input: DB820c Headset Jack as /devices/platform/sound/sound/card0/input4
- [ 29.957330] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 29.964074] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 29.973086] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 30.084114] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
- [ OK ] Started Network Manager.
- Starting Hostname Service...
- [ OK ] Started Manage Sound Card State (restore and store).
- Starting Save/Restore Sound Card State...
- Starting Bluetooth service...
- [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
- Stopping DSI Display Service...
- Starting Authorization Manager...
- [ 30.948083] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 30.955951] Bluetooth: BNEP filters: protocol multicast
- [ 30.963040] Bluetooth: BNEP socket layer initialized
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Stopped DSI Display Service.
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Started Bluetooth service.
- [ OK ] Started Authorization Manager.
- [ OK ] Started Hostname Service.
- [ OK ] Started Modem Manager.
- Starting Network Manager Script Dispatcher Service...
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Reached target Bluetooth.
- [ OK ] Reached target Sound Card.
- [ OK ] Started DSI Display Service.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ 31.239186] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- [ 31.269308] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started Login Service.
- [ 31.307736] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ OK ] Started WPA supplicant.
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- Starting /etc/rc.local Compatibility...
- Starting Permit User Sessions...
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Permit User Sessions.
- Starting Simple Desktop Display Manager...
- [ OK ] Created slice User Slice of UID 1000.
- Starting User Runtime Directory /run/user/1000...
- [ OK ] Started Serial Getty on ttyMSM0.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Simple Desktop Display Manager.
- [ OK ] Started User Runtime Directory /run/user/1000.
- [ OK ] Started Reconfigure to make network manager work.
- [ OK ] Started Disk Manager.
- Starting User Manager for UID 1000...
- [ 31.784878] msm 900000.mdss: loaded qcom/a530_pm4.fw from legacy location
- [ 31.792735] msm 900000.mdss: loaded qcom/a530_pfp.fw from legacy location
- [ 31.800177] msm 900000.mdss: loaded qcom/a530v3_gpmu.fw2 from legacy location
- [ 31.807798] msm 900000.mdss: loaded qcom/a530_zap.mdt from legacy location
- [ OK ] Started User Manager for UID 1000.
- [ OK ] Started Session c1 of user linaro.
- [ OK ] Started Session c2 of user linaro.
- [ 32.047699] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 32.050648] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 32.075284] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 10 linaro-alip ttyMSM0
- linaro-alip login: root (automatic login)
- Last login: Thu Feb 14 10:12:09 UTC 2019 on ttyMSM0
- Linux linaro-alip 4.14.0-qcomlt-arm64 #1 SMP PREEMPT Wed Nov 13 19:06:12 IST 2019 aarch64
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- root@linaro-alip:~# [ 32.899627] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 32.902078] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 32.928777] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 33.070953] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 52.422389] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
- [ 52.422448] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
- [ 52.429578] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
- [ 52.437848] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: command[0x10dac] not expecting rsp
- [ 52.524774] wcd9335-codec wcd9335-codec.0: wcd9335_slimbus_irq: overflow error on RX port 5, value 1
- [ 52.541972] wcd9335-codec wcd9335-codec.0: wcd9335_slimbus_irq: overflow error on RX port 5, value 5
- [ 52.712599] Bluetooth: RFCOMM TTY layer initialized
- [ 52.712643] Bluetooth: RFCOMM socket layer initialized
- [ 52.716385] Bluetooth: RFCOMM ver 1.11
Add Comment
Please, Sign In to add comment