SHARE
TWEET

HG556a seguridadwireless

a guest Mar 29th, 2012 52 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. HG556a Compilación r30964  
  2.  
  3.  
  4.  
  5. BusyBox v1.19.3 (2012-03-17 21:10:32 CET) built-in shell (ash)
  6. Enter 'help' for a list of built-in commands.
  7.  
  8.   _______                     ________        __
  9.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  10.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  11.  |_______||   __|_____|__|__||________||__|  |____|
  12.           |__| W I R E L E S S   F R E E D O M
  13.  ATTITUDE ADJUSTMENT (bleeding edge, r30964) ----------
  14.   * 1/4 oz Vodka      Pour all ingredients into mixing
  15.   * 1/4 oz Gin        tin with ice, strain into glass.
  16.   * 1/4 oz Amaretto
  17.   * 1/4 oz Triple sec
  18.   * 1/4 oz Peach schnapps
  19.   * 1/4 oz Sour mix
  20.   * 1 splash Cranberry juice
  21.  -----------------------------------------------------
  22. root@OpenWrt:~# dmesg
  23. Linux version 3.0.18 (dani@tool) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 17 21:52:31 CET 2012
  24. Detected Broadcom 0x6358 CPU revision a1
  25. CPU frequency is 300 MHz
  26. 64MB of RAM installed
  27. registering 40 GPIOs
  28. board_bcm963xx: Boot address 0xbe000000
  29. board_bcm963xx: CFE version: 100.48.56-49.46
  30. bootconsole [early0] enabled
  31. CPU revision is: 0002a010 (Broadcom BMIPS4350)
  32. board_bcm963xx: board name: HW556
  33. Determined physical RAM map:
  34.  memory: 04000000 @ 00000000 (usable)
  35. Initrd not found or empty - disabling initrd
  36. Zone PFN ranges:
  37.   Normal   0x00000000 -> 0x00004000
  38. Movable zone start PFN for each node
  39. early_node_map[1] active PFN ranges
  40.     0: 0x00000000 -> 0x00004000
  41. On node 0 totalpages: 16384
  42. free_area_init_node: node 0, pgdat 8027c650, node_mem_map 81000000
  43.   Normal zone: 128 pages used for memmap
  44.   Normal zone: 0 pages reserved
  45.   Normal zone: 16256 pages, LIFO batch:3
  46. Reserving 0MB of memory at 0MB for crashkernel
  47. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  48. pcpu-alloc: [0] 0
  49. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  50. Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  51. PID hash table entries: 256 (order: -2, 1024 bytes)
  52. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  53. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  54. Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  55. Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  56. Memory: 62056k/65536k available (2116k kernel code, 3480k reserved, 366k data, 160k init, 0k highmem)
  57. NR_IRQS:128
  58. Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
  59. pid_max: default: 32768 minimum: 301
  60. Mount-cache hash table entries: 512
  61. NET: Registered protocol family 16
  62. cal_data0 = 0xffff ≠ 0xa55a, switching athdata address to 0x1EF7E000
  63. changed ath9k regdomain to 0xff
  64. registering PCI controller with io_map_base unset
  65. bio: create slab <bio-0> at 0
  66. pci 0000:00:01.0: [1814:3592] type 0 class 0x000280
  67. pci 0000:00:01.0: reg 10: [mem 0xffff0000-0xffffffff]
  68. pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  69. pci 0000:00:01.0: PME# disabled
  70. pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  71. pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x3000ffff] (PCI address [0x30000000-0x3000ffff])
  72. Switching to clocksource MIPS
  73. NET: Registered protocol family 2
  74. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  75. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  76. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  77. TCP: Hash tables configured (established 2048 bind 2048)
  78. TCP reno registered
  79. UDP hash table entries: 256 (order: 0, 4096 bytes)
  80. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  81. NET: Registered protocol family 1
  82. PCI: CLS 0 bytes, default 32
  83. audit: initializing netlink socket (disabled)
  84. type=2000 audit(0.176:1): initialized
  85. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  86. JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  87. msgmni has been set to 121
  88. io scheduler noop registered
  89. io scheduler deadline registered (default)
  90. bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
  91. console [ttyS0] enabled, bootconsole disabled
  92. bcm963xx-flash bcm963xx-flash.0: 0x02000000 at 0x1e000000
  93. bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  94. bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
  95. Amd/Fujitsu Extended Query Table at 0x0040
  96.   Amd/Fujitsu Extended Query version 1.3.
  97. number of CFI chips: 1
  98. bcm963xx_flash: Read Signature value of CFE1CFE1
  99. bcm963xx-flash bcm963xx-flash.0: CFE bootloader detected
  100. bcm963xx_flash: CFE boot tag found with version 8 and board type HW556
  101. bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
  102. bcm963xx_flash: Partition 1 is kernel offset 20100 and length dff00
  103. bcm963xx_flash: Partition 2 is rootfs offset 100000 and length d00000
  104. bcm963xx_flash: Partition 3 is ath_data offset e00000 and length 1e0000
  105. bcm963xx_flash: Partition 4 is nvram offset fe0000 and length 20000
  106. bcm963xx_flash: Partition 5 is linux offset 20000 and length de0000
  107. bcm963xx_flash: Spare partition is 380000 offset and length a80000
  108. Creating 6 MTD partitions on "bcm963xx":
  109. 0x000000000000-0x000000020000 : "CFE"
  110. 0x000000020100-0x000000100000 : "kernel"
  111. mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  112. 0x000000100000-0x000000e00000 : "rootfs"
  113. mtd: partition "rootfs" set to be root filesystem
  114. mtd: partition "rootfs_data" created automatically, ofs=360000, len=AA0000
  115. 0x000000360000-0x000000e00000 : "rootfs_data"
  116. 0x000000e00000-0x000000fe0000 : "ath_data"
  117. 0x000000fe0000-0x000001000000 : "nvram"
  118. 0x000000020000-0x000000e00000 : "linux"
  119. bcm63xx-wdt bcm63xx-wdt.0:  started, timer margin: 30 sec
  120. Registered led device: message
  121. Registered led device: hspa
  122. Registered led device: dsl
  123. Registered led device: power
  124. Registered led device: all_leds
  125. TCP westwood registered
  126. NET: Registered protocol family 17
  127. 802.1Q VLAN Support v1.8
  128. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  129. Freeing unused kernel memory: 160k freed
  130. roboswitch: Probing device eth0: found a 5325! It's a 5350.
  131. There is already a switch registered on the device 'eth0'
  132. Compat-wireless backport release: compat-wireless-2012-02-27-1-r30964
  133. Backport based on wireless-testing.git master-2012-02-27
  134. cfg80211: Calling CRDA to update world regulatory domain
  135. cfg80211: World regulatory domain updated:
  136. cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  137. cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  138. cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  139. cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  140. cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  141. cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  142. SCSI subsystem initialized
  143. There is already a switch registered on the device 'eth0'
  144. usbcore: registered new interface driver usbfs
  145. usbcore: registered new interface driver hub
  146. usbcore: registered new device driver usb
  147. Button Hotplug driver version 0.4.1
  148. PPP generic driver version 2.4.2
  149. ip_tables: (C) 2000-2006 Netfilter Core Team
  150. NET: Registered protocol family 24
  151. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  152. bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
  153. bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
  154. bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
  155. bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
  156. hub 1-0:1.0: USB hub found
  157. hub 1-0:1.0: 2 ports detected
  158. nf_conntrack version 0.5.0 (972 buckets, 3888 max)
  159. usb 1-2: new high speed USB device number 2 using bcm63xx_ehci
  160. hub 1-2:1.0: USB hub found
  161. hub 1-2:1.0: 4 ports detected
  162. ath_hal: module license 'Proprietary' taints kernel.
  163. Disabling lock debugging due to kernel taint
  164. ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
  165. ath_pci: trunk
  166. wlan: trunk
  167. wlan: mac acl policy registered
  168. ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
  169. ath_rate_minstrel: look around rate set to 10%
  170. ath_rate_minstrel: EWMA rolloff level set to 75%
  171. ath_rate_minstrel: max segment size in the mrr set to 6000 us
  172. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  173. bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
  174. bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
  175. bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
  176. hub 2-0:1.0: USB hub found
  177. hub 2-0:1.0: 1 port detected
  178. Initializing USB Mass Storage driver...
  179. usbcore: registered new interface driver usb-storage
  180. USB Mass Storage support registered.
  181. input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
  182. eth0: link forced UP - 100/full - flow control off/off
  183. device eth0 entered promiscuous mode
  184. br-lan: port 1(eth0) entering forwarding state
  185. br-lan: port 1(eth0) entering forwarding state
  186. jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  187. jffs2_build_filesystem(): unlocking the mtd device... done.
  188. jffs2_build_filesystem(): erasing all blocks after the end marker... done.
  189. JFFS2 notice: (955) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  190. root@OpenWrt:~#
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top