Advertisement
Guest User

Geeksphone Peak - dmesg

a guest
Jun 6th, 2013
2,049
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.0.21-GP+ (geeksphone@GP-HARLAN) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Apr 18 12:44:22 CEST 2013
  4. <4>[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
  5. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. <4>[ 0.000000] Machine: QCT MSM8625 SURF
  7. <6>[ 0.000000] memory pool 3 (start 25140000 size 7fc0000) initialized
  8. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  9. <4>[ 0.000000] uncached_start = 0xc0800000, uncached_end = 0xc0900000.
  10. <4>[ 0.000000] BUG: mapping for 0x00a00000 at 0xc0800000 overlaps vmalloc space
  11. <3>[ 0.000000] smem_find(137, 80): wrong size 64
  12. <3>[ 0.000000] smem_find(137, 72): wrong size 64
  13. <6>[ 0.000000] socinfo_init: v4, id=127, ver=1.0, raw_id=1907, raw_ver=0, hw_plat=2, hw_plat_ver=65536
  14. <6>[ 0.000000] L310 cache controller enabled
  15. <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c8, AUX_CTRL 0x30d60000, Cache size: 524288 B
  16. <6>[ 0.000000] Prfetch Ctrl: 0x74800003
  17. <7>[ 0.000000] On node 0 totalpages: 85757
  18. <7>[ 0.000000] free_area_init_node: node 0, pgdat c073d1c0, node_mem_map c09ed000
  19. <7>[ 0.000000] Normal zone: 1438 pages used for memmap
  20. <7>[ 0.000000] Normal zone: 0 pages reserved
  21. <7>[ 0.000000] Normal zone: 84319 pages, LIFO batch:15
  22. <6>[ 0.000000] allocating 6266880 bytes at c13d2000 (15d2000 physical) for fb
  23. <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c19cf000 s9728 r8192 d14848 u32768
  24. <7>[ 0.000000] pcpu-alloc: s9728 r8192 d14848 u32768 alloc=8*4096
  25. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  26. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 84319
  27. <5>[ 0.000000] Kernel command line: androidboot.hardware=qcom loglevel=1 androidboot.emmc=true androidboot.serialno=MSM8225SURF androidboot.baseband=msm androidboot.bootupmode=normal reboot=h splash=1
  28. <4>[ 0.000000] cont_splash_enabled = 1
  29. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  30. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  32. <6>[ 0.000000] Memory: 250MB 0MB 0MB 1MB 81MB = 334MB total
  33. <5>[ 0.000000] Memory: 321688k/321688k available, 152424k reserved, 0K highmem
  34. <5>[ 0.000000] Virtual kernel memory layout:
  35. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  36. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  37. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  38. <5>[ 0.000000] vmalloc : 0xdd000000 - 0xfa000000 ( 464 MB)
  39. <5>[ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB)
  40. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  41. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  42. <5>[ 0.000000] .init : 0xc0008000 - 0xc003e000 ( 216 kB)
  43. <5>[ 0.000000] .text : 0xc003e000 - 0xc06cb9b8 (6711 kB)
  44. <5>[ 0.000000] .data : 0xc06cc000 - 0xc073dcc0 ( 456 kB)
  45. <5>[ 0.000000] .bss : 0xc0900024 - 0xc09e8784 ( 930 kB)
  46. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  47. <6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
  48. <6>[ 0.000000] NR_IRQS:645
  49. <6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
  50. <6>[ 0.000000] Console: colour dummy device 80x30
  51. <6>[ 0.000314] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
  52. <6>[ 0.070054] pid_max: default: 32768 minimum: 301
  53. <6>[ 0.070366] Mount-cache hash table entries: 512
  54. <6>[ 0.071424] Initializing cgroup subsys cpuacct
  55. <6>[ 0.071526] Initializing cgroup subsys devices
  56. <6>[ 0.071543] Initializing cgroup subsys freezer
  57. <6>[ 0.071586] CPU: Testing write buffer coherency: ok
  58. <6>[ 0.071866] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
  59. <6>[ 0.073503] Brought up 2 CPUs
  60. <6>[ 0.073523] SMP: Total of 2 processors activated (597.19 BogoMIPS).
  61. <6>[ 0.077426] print_constraints: dummy:
  62. <6>[ 0.077748] NET: Registered protocol family 16
  63. <6>[ 0.079136] Shared PLL control available.
  64. <6>[ 0.082174] acpuclk_7627_probe()
  65. <6>[ 0.082223] Dynamic reprogramming is ON
  66. <6>[ 0.083181] ACPU running at 600000 KHz
  67. <6>[ 0.083203] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
  68. <6>[ 0.083234] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 6 3 7 -1
  69. <6>[ 0.083263] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 6 3 7 -1
  70. <6>[ 0.083291] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 6 3 7 8
  71. <6>[ 0.083319] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 6 -1 7 8
  72. <6>[ 0.083348] 4 300000 2 4 37500 4 200000 -1 1 -1 -1 6 -1 7 8
  73. <6>[ 0.083376] 5 320000 0 3 40000 4 200000 -1 1 4 -1 6 -1 7 8
  74. <6>[ 0.083404] 6 480000 0 2 60000 4 200000 5 1 4 -1 -1 -1 7 9
  75. <6>[ 0.083433] 7 600000 2 2 75000 4 160000 5 1 4 -1 -1 -1 -1 10
  76. <6>[ 0.083461] 8 700800 4 1 87500 4 160000 5 2 4 -1 -1 -1 -1 10
  77. <6>[ 0.083489] 9 1008000 4 1 126000 4 200000 6 -1 7 8 -1 -1 -1 10
  78. <6>[ 0.083518] 10 1152000 4 1 144000 4 200000 -1 -1 7 8 -1 -1 -1 -1
  79. <6>[ 0.083536] CPU0: 6 scaling frequencies supported.
  80. <6>[ 0.083551] CPU1: 6 scaling frequencies supported.
  81. <6>[ 0.083761] print_constraints: smps1: 1100 mV normal
  82. <6>[ 0.083959] print_constraints: smps2: 1100 mV normal
  83. <6>[ 0.084151] print_constraints: smps3: 1800 mV normal
  84. <6>[ 0.084339] print_constraints: smps4: 2100 mV normal
  85. <6>[ 0.084524] print_constraints: ldo01: 1800 <--> 2100 mV normal
  86. <6>[ 0.084711] print_constraints: ldo02: 2050 <--> 2850 mV normal
  87. <6>[ 0.084893] print_constraints: ldo03: 1200 mV normal
  88. <6>[ 0.085093] print_constraints: ldo04: 1100 mV normal
  89. <6>[ 0.085283] print_constraints: ldo05: 1200 mV normal
  90. <6>[ 0.085458] print_constraints: ldo06: 1200 mV normal
  91. <6>[ 0.085653] print_constraints: ldo07: 2600 mV normal
  92. <6>[ 0.085849] print_constraints: ldo08: 2850 mV normal
  93. <6>[ 0.086051] print_constraints: ldo09: 1800 mV normal
  94. <6>[ 0.086261] print_constraints: ldo10: 1800 <--> 3000 mV normal
  95. <6>[ 0.086443] print_constraints: ldo11: 1800 mV normal
  96. <6>[ 0.086646] print_constraints: ldo12: 2850 mV normal
  97. <6>[ 0.086854] print_constraints: ldo13: 2850 mV normal
  98. <6>[ 0.087038] print_constraints: ldo14: 3300 mV normal
  99. <6>[ 0.087241] print_constraints: ldo15: 1800 <--> 2850 mV normal
  100. <6>[ 0.087461] print_constraints: ldo16: 1800 <--> 2850 mV normal
  101. <6>[ 0.087664] print_constraints: ldo17: 2900 <--> 3300 mV normal
  102. <6>[ 0.087873] print_constraints: ldo18: 2700 mV normal
  103. <6>[ 0.088064] print_constraints: ldo19: 1200 <--> 1800 mV normal
  104. <6>[ 0.088281] print_constraints: ncp: 1800 mV normal
  105. <6>[ 0.090719] ram_console: got buffer at 25100000, size 40000
  106. <6>[ 0.090753] ram_console: found existing buffer, size 79, start 79
  107. <6>[ 0.090894] console [ram0] enabled
  108. <4>[ 0.091258] mmc: gpio_sdc1_hw_det = 35
  109. <6>[ 0.092208] i2c_register_board_info BMA2X2 ACC
  110. <4>[ 0.092223] i2c_register_board_info PS31XX
  111. <6>[ 0.092236] i2c_register_board_info AKM8963
  112. <3>[ 0.092314] gpio_bt_config: BT sys_reset_en GPIO : 16.
  113. <4>[ 0.092556] ######### get_camera_id : 116 : 0
  114. <4>[ 0.093304] i2c_register_board_info
  115. <4>[ 0.093384] register_tp_devices, GPIO = 1
  116. <4>[ 0.093396] Register touchscreen devices for Cellon Phone.
  117. <3>[ 0.093979] gpio_request(1023) <flashlight> failed: -22
  118. <3>[ 0.093998] tricolor_leds_gpio_setup: Failed to obtain tricolor_leds GPIO . Code: -22
  119. <3>[ 0.096616] i2c i2c-1: Invalid 7-bit I2C address 0x00
  120. <3>[ 0.096636] i2c i2c-1: Can't create device at 0x00
  121. <6>[ 0.097571] print_constraints: fs_gfx3d: normal
  122. <6>[ 0.114391] bio: create slab <bio-0> at 0
  123. <3>[ 0.115094] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75
  124. <3>[ 0.115138] qup_i2c qup_i2c.1: I2C slave addr:0x3e not connected
  125. <4>[ 0.115168] sx150x 1-003e: i2c write fail: can't write 01 to 1f: -107
  126. <4>[ 0.115201] sx150x: probe of 1-003e failed with error -107
  127. <6>[ 0.115729] usbcore: registered new interface driver usbfs
  128. <6>[ 0.115863] usbcore: registered new interface driver hub
  129. <6>[ 0.116036] usbcore: registered new device driver usb
  130. <6>[ 0.116551] Advanced Linux Sound Architecture Driver Version 1.0.24.
  131. <6>[ 0.117341] Bluetooth: Core ver 2.16
  132. <6>[ 0.117413] NET: Registered protocol family 31
  133. <6>[ 0.117428] Bluetooth: HCI device and connection manager initialized
  134. <6>[ 0.117448] Bluetooth: HCI socket layer initialized
  135. <6>[ 0.117461] Bluetooth: L2CAP socket layer initialized
  136. <6>[ 0.117706] Bluetooth: SCO socket layer initialized
  137. <6>[ 0.117921] Switching to clocksource dg_timer
  138. <6>[ 0.127349] NET: Registered protocol family 2
  139. <6>[ 0.127616] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  140. <6>[ 0.128219] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  141. <6>[ 0.128619] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  142. <6>[ 0.129008] TCP: Hash tables configured (established 16384 bind 16384)
  143. <6>[ 0.129028] TCP reno registered
  144. <6>[ 0.129053] UDP hash table entries: 256 (order: 1, 8192 bytes)
  145. <6>[ 0.129099] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  146. <6>[ 0.129804] NET: Registered protocol family 1
  147. <6>[ 0.130119] Unpacking initramfs...
  148. <6>[ 0.222201] Freeing initrd memory: 804K
  149. <6>[ 0.222369] PMU: registered new PMU device of type 0
  150. <3>[ 0.226254] Notify: smsm init
  151. <4>[ 0.226544] get_nand_partitions: no flash partition table in shared memory
  152. <6>[ 0.231856] rpcrouter_smd_remote_notify: smd opened 0x (null)
  153. <6>[ 0.232226] [adsp.c:adsp_init] msm_adsp -- 0
  154. <6>[ 0.233664] [audpp.c:audpp_probe] Number of decoder supported 5
  155. <6>[ 0.233684] [audpp.c:audpp_probe] Number of concurrency supported 8
  156. <6>[ 0.233703] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  157. <6>[ 0.233719] [audpp.c:audpp_probe] queueid:13
  158. <6>[ 0.233734] [audpp.c:audpp_probe] decid:0
  159. <6>[ 0.233748] [audpp.c:audpp_probe] nr_codec_support:11
  160. <6>[ 0.233764] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  161. <6>[ 0.233779] [audpp.c:audpp_probe] queueid:14
  162. <6>[ 0.233794] [audpp.c:audpp_probe] decid:1
  163. <6>[ 0.233808] [audpp.c:audpp_probe] nr_codec_support:11
  164. <6>[ 0.233823] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  165. <6>[ 0.233839] [audpp.c:audpp_probe] queueid:15
  166. <6>[ 0.233854] [audpp.c:audpp_probe] decid:2
  167. <6>[ 0.233868] [audpp.c:audpp_probe] nr_codec_support:11
  168. <6>[ 0.233884] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  169. <6>[ 0.233899] [audpp.c:audpp_probe] queueid:16
  170. <6>[ 0.233914] [audpp.c:audpp_probe] decid:3
  171. <6>[ 0.233928] [audpp.c:audpp_probe] nr_codec_support:11
  172. <6>[ 0.233944] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  173. <6>[ 0.233959] [audpp.c:audpp_probe] queueid:17
  174. <6>[ 0.233974] [audpp.c:audpp_probe] decid:4
  175. <6>[ 0.233988] [audpp.c:audpp_probe] nr_codec_support:1
  176. <3>[ 0.235079] rpcrouter: Server create rejected, version = 0, program = 3000003b
  177. <6>[ 0.236491] WLAN power init
  178. <6>[ 0.246791] __msm_rpc_connect: server not found 30000002:20001
  179. <6>[ 0.338048] ath6kl: Allocate wlan ram at addr d4dd0000 successfully
  180. <4>[ 0.338634] MAC from NV 88:F4:88:70:C4:E2
  181. <6>[ 0.338809] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2d2c0000, size = 0x00300000
  182. <6>[ 0.338834] rmt_storage_get_ramfs: RAMFS entry: addr = 0x2d1c0000, size = 0x00100000
  183. <6>[ 0.339141] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
  184. <6>[ 0.350068] ashmem: initialized
  185. <6>[ 0.351408] msgmni has been set to 629
  186. <6>[ 0.353248] io scheduler noop registered
  187. <6>[ 0.353264] io scheduler deadline registered
  188. <6>[ 0.353363] io scheduler cfq registered
  189. <6>[ 0.353378] io scheduler sio registered (default)
  190. <3>[ 0.353551] msm_ion_client_create() return error, val ffffffed
  191. <6>[ 0.355024] mipi_dsi base phy_addr = 0xa1100000 virt = 0xdd200000
  192. <4>[ 0.355069] msm_fb_dsi_client_c8680_reset: 1289
  193. <5>[ 0.355178] Boot Reason = 16
  194. <4>[ 0.355254] c8680 panel_manufacturer = 4
  195. <6>[ 0.355656] mipi_himax_lcd_init
  196. <4>[ 0.355789] mipi_nt35510_alaska_lcd_init
  197. <4>[ 0.355916] mipi_otm8009a_lcd_init
  198. <4>[ 0.356046] mipi_otm9608a_lcd_init
  199. <4>[ 0.356176] msm_fb_detect_panel: 669
  200. <4>[ 0.356193] msm_fb_detect_panel: 669
  201. <4>[ 0.356206] msm_fb_detect_panel: 669
  202. <4>[ 0.356221] msm_fb_detect_panel: 669
  203. <4>[ 0.356234] msm_fb_detect_panel: 669
  204. <4>[ 0.356249] msm_fb_detect_panel: 669
  205. <4>[ 0.356263] msm_fb_detect_panel: 669
  206. <4>[ 0.356278] msm_fb_detect_panel: 669
  207. <4>[ 0.356291] msm_fb_detect_panel: 669
  208. <4>[ 0.356304] msm_fb_detect_panel: 669
  209. <4>[ 0.356319] msm_fb_detect_panel: 669
  210. <4>[ 0.356333] msm_fb_detect_panel: 669
  211. <4>[ 0.356348] msm_fb_detect_panel: 669
  212. <4>[ 0.356361] msm_fb_detect_panel: 669
  213. <4>[ 0.356376] msm_fb_detect_panel: 669
  214. <4>[ 0.356389] msm_fb_detect_panel: 669
  215. <4>[ 0.356403] msm_fb_detect_panel: 669
  216. <4>[ 0.356418] msm_fb_detect_panel: 669
  217. <4>[ 0.356431] msm_fb_detect_panel: 669
  218. <4>[ 0.356446] msm_fb_detect_panel: 669
  219. <4>[ 0.356459] msm_fb_detect_panel: 669
  220. <4>[ 0.356473] msm_fb_detect_panel: 669
  221. <4>[ 0.356488] mipi_otm9608a_device_register
  222. <4>[ 0.356798] mipi_otm9608a_lcd_probe: Enter
  223. <6>[ 0.356816] setting pdata->panel_info.fb_num to 3. type: 9
  224. <6>[ 0.357013] DSI_TWO_LANES
  225. <6>[ 0.363016] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
  226. <7>[ 0.363354] Registered led device: lcd-backlight
  227. <4>[ 0.363406] mipi_otm9608a_lcd_probe: Done
  228. <4>[ 0.363424] lcdc_hx8357_panel_init: start
  229. <4>[ 0.363438] this is not TRULY_HIMAX
  230. <4>[ 0.363448] lcdc_R61581_boe_panel_init: start
  231. <4>[ 0.363459] this is not BOE_R61581
  232. <6>[ 0.363833] msm_serial: detected port #0
  233. <6>[ 0.363948] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 41) is a MSM
  234. <6>[ 0.364049] msm_serial: console setup on port #0
  235. <6>[ 0.364313] console [ttyMSM0] enabled
  236. <6>[ 0.518169] msm_serial: driver initialized
  237. <6>[ 0.518823] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 77) is a MSM HS UART
  238. <6>[ 0.678168] msm_serial_hs module loaded
  239. <6>[ 0.680988] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  240. <6>[ 0.686589] loop: module loaded
  241. <6>[ 0.686746] pmem: Initializing pmem as cached
  242. <6>[ 0.687016] allocating 73400320 bytes at 25140000 physical for pmem
  243. <6>[ 0.687119] pmem: Initializing pmem_adsp as cached
  244. <6>[ 0.687356] allocating 57671680 bytes at 29740000 physical for pmem_adsp
  245. <6>[ 0.687446] pmem: Initializing pmem_audio as non-cached
  246. <6>[ 0.687659] allocating 2048000 bytes at 2ce40000 physical for pmem_audio
  247. <6>[ 0.688334] bma chip id[3]
  248. <6>[ 0.688351] cellon_gsh bma250_chip_id=1
  249. <6>[ 0.688364] Bosch Sensortec Device detected!
  250. <6>[ 0.688373] BMA250E registered I2C driver!
  251. <6>[ 0.693688] input: bma2x2 as /devices/virtual/input/input0
  252. <4>[ 0.693878] i2c-core: driver [bma2x2] using legacy suspend method
  253. <4>[ 0.693894] i2c-core: driver [bma2x2] using legacy resume method
  254. <6>[ 0.693919] AKM8963 compass driver: initialize.
  255. <6>[ 0.694728] input: compass as /devices/virtual/input/input1
  256. <6>[ 0.695444] akm8963 1-000d: successfully probed.
  257. <6>[ 0.908329] PPP generic driver version 2.4.2
  258. <6>[ 0.908599] PPP Deflate Compression module registered
  259. <6>[ 0.908616] PPP BSD Compression module registered
  260. <6>[ 0.909469] PPP MPPE Compression module registered
  261. <6>[ 0.909489] NET: Registered protocol family 24
  262. <6>[ 0.909539] PPTP driver version 0.8.5
  263. <6>[ 0.909891] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
  264. <6>[ 0.909908] CSLIP: code copyright 1989 Regents of the University of California.
  265. <6>[ 0.909934] tun: Universal TUN/TAP device driver, 1.6
  266. <6>[ 0.909949] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  267. <6>[ 0.910209] rmnet_init: SMD devices[8]
  268. <3>[ 0.916259] failed to request 141 GPIO
  269. <6>[ 0.916934] __msm_rpc_connect: server not found 3000001a:40001
  270. <6>[ 0.916956] __msm_rpc_connect: server not found 3000001a:30001
  271. <6>[ 0.916976] __msm_rpc_connect: server not found 3000001a:20001
  272. <6>[ 0.917211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  273. <6>[ 0.917376] host driver registered w/ tranceiver
  274. <6>[ 0.917948] peripheral driver registered w/ tranceiver
  275. <6>[ 0.918774] mbim_init: initialize 1 instances
  276. <6>[ 0.919018] mbim_init: Initialized 1 ports
  277. <6>[ 0.921624] android_usb gadget: Mass Storage Function, version: 2009/09/11
  278. <6>[ 0.921646] android_usb gadget: Number of LUNs=3
  279. <6>[ 0.921664] lun0: LUN: removable file: (no medium)
  280. <6>[ 0.921681] lun1: LUN: removable file: (no medium)
  281. <6>[ 0.921699] lun2: LUN: removable read only CD-ROM file: (no medium)
  282. <4>[ 0.922028] get_serial_number read from smem gsh test
  283. <4>[ 0.922051] card_flag=0,gsh serail number read data:5fae7088f488
  284. <4>[ 0.922071] strings_dev[STRING_SERIAL_IDX].s = 5fae7088f488
  285. <6>[ 0.922101] android_usb gadget: android_usb ready
  286. <6>[ 0.924218] diagchar initialized now
  287. <6>[ 0.924664] rmi_i2c 1-0020: Probing s2202_ts at 0x20 (IRQ 48).
  288. <6>[ 0.924684] rmi_i2c 1-0020: Configuring GPIOs.
  289. <6>[ 0.924853] rmi_i2c 1-0020: Done with GPIO configuration.
  290. <3>[ 0.925014] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1363c8, irq:75
  291. <3>[ 0.925056] qup_i2c qup_i2c.1: I2C slave addr:0x20 not connected
  292. <3>[ 0.925083] rmi_i2c 1-0020: rmi_set_page: set page failed: -107.
  293. <3>[ 0.925101] rmi_i2c 1-0020: Failed to set page select to 0.
  294. <7>[ 0.925124] Robin->rmi_i2c_probe_351:s2202 ic not connect at addrress 20
  295. <4>[ 0.925158] rmi_i2c: probe of 1-0020 failed with error -107
  296. <4>[ 0.925374] Himax TS init
  297. <6>[ 0.925543] himax->himax_ts_probe_1973:himax TS probe
  298. <6>[ 0.925581] himax->ChangeIrefSPP_564:entern Himax ChangeIrefSPP by zhuxinglong
  299. <4>[ 1.093178] entern Himax ChangeIrefSPP by zhuxinglong7 cmd0 = 0x18
  300. <4>[ 1.093196] entern Himax ChangeIrefSPP by zhuxinglong7 cmd1 = 0x97
  301. <4>[ 1.093211] entern Himax ChangeIrefSPP by zhuxinglong7 cmd2 = 0x27
  302. <4>[ 1.093226] entern Himax ChangeIrefSPP by zhuxinglong7 cmd3 = 0x27
  303. <4>[ 1.093241] entern Himax ChangeIrefSPP by zhuxinglong7
  304. <4>[ 1.099746] entern Himax ChangeIrefSPP by zhuxinglong7 cmd0 = 0xff
  305. <4>[ 1.099764] entern Himax ChangeIrefSPP by zhuxinglong7 cmd1 = 0x3
  306. <4>[ 1.099779] entern Himax ChangeIrefSPP by zhuxinglong7 cmd2 = 0x8e
  307. <4>[ 1.099794] entern Himax ChangeIrefSPP by zhuxinglong7 cmd3 = 0x14
  308. <4>[ 1.099809] entern Himax ChangeIrefSPP by zhuxinglong7
  309. <4>[ 1.106288] entern Himax ChangeIrefSPP by zhuxinglong7 cmd0 = 0x0
  310. <4>[ 1.106306] entern Himax ChangeIrefSPP by zhuxinglong7 cmd1 = 0x38
  311. <4>[ 1.106321] entern Himax ChangeIrefSPP by zhuxinglong7 cmd2 = 0x82
  312. <4>[ 1.106338] entern Himax ChangeIrefSPP by zhuxinglong7 cmd3 = 0xec
  313. <4>[ 1.106351] entern Himax ChangeIrefSPP by zhuxinglong7
  314. <4>[ 1.112861] entern Himax ChangeIrefSPP by zhuxinglong7 cmd0 = 0x0
  315. <4>[ 1.112879] entern Himax ChangeIrefSPP by zhuxinglong7 cmd1 = 0x0
  316. <4>[ 1.112896] entern Himax ChangeIrefSPP by zhuxinglong7 cmd2 = 0x7d
  317. <4>[ 1.112911] entern Himax ChangeIrefSPP by zhuxinglong7 cmd3 = 0x3
  318. <4>[ 1.112924] entern Himax ChangeIrefSPP by zhuxinglong7
  319. <6>[ 1.204839] himax->detect_project_name_424: raw buf [C8680GP]
  320. <6>[ 1.204859] himax->detect_project_name_436: project name [C8680GP]
  321. <6>[ 1.211711] himax->detect_point_number_343:point number [V80]
  322. <6>[ 1.268231] himax->himax_ts_poweron_1195:OK addr = 0x4a
  323. <6>[ 1.378174] android_work: android_work: did not send uevent (0 0 (null))
  324. <6>[ 1.398334] input: himax-touchscreen as /devices/virtual/input/input2
  325. <6>[ 1.398633] himax->report_function_940:finger number [4],packet_size[24]
  326. <6>[ 1.398861] himax->himax_ts_probe_2097:Start touchscreen himax-touchscreen in interrupt mode
  327. <6>[ 1.399006] maxtouch->mxt_probe_2694:mxt_probe
  328. <3>[ 1.399053] atmel_gpio_init: Failed to get attn gpio 48. Code: -16.
  329. <3>[ 1.399071] maxtouch->mxt_probe_2761:!!Error!!request gpio error
  330. <4>[ 1.399103] maxtouch-ts154: probe of 1-004b failed with error -16
  331. <6>[ 1.399381] GPIO Matrix Keypad Driver: Start keypad matrix for 7x27a_kp in interrupt mode
  332. <6>[ 1.399781] input: 7x27a_kp as /devices/virtual/input/input3
  333. <3>[ 1.401263] himax->report_function_1054:himax tp data is error finger [15],report_key[0]
  334. <6>[ 1.402033] input: lightsensor-level as /devices/virtual/input/input4
  335. <6>[ 1.402483] input: proximity as /devices/virtual/input/input5
  336. <3>[ 1.778769] stk-oss: STK PS : Max PS data of crosstalk:255
  337. <3>[ 1.778788] stk-oss: STK PS : PS crosstalk is too large
  338. <4>[ 1.779509] i2c-core: driver [stk_ps] using legacy suspend method
  339. <4>[ 1.779528] i2c-core: driver [stk_ps] using legacy resume method
  340. <4>[ 1.779988] i2c-core: driver [apds990x] using legacy suspend method
  341. <4>[ 1.780006] i2c-core: driver [apds990x] using legacy resume method
  342. <6>[ 1.782719] RPC CALL -- TOD TIME UPDATE: ttick = 278243
  343. <6>[ 1.782729] stamp=25769836544, freq = 0
  344. <3>[ 1.782753] /home/geeksphone/FOS/peak/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  345. <6>[ 1.784566] using rtc device, msm_rtc, for alarms
  346. <6>[ 1.784611] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
  347. <6>[ 1.785534] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
  348. <6>[ 1.785646] i2c /dev entries driver
  349. <6>[ 1.786076] Linux media interface: v0.10
  350. <6>[ 1.786164] Linux video capture interface: v2.00
  351. <4>[ 1.788518] ######### msm_sensor_init_module begin
  352. <4>[ 1.788588]
  353. <4>[ 1.788594] in s5k3h2y_sensor_i2c_probe
  354. <4>[ 1.788609] msm_sensor_i2c_probe s5k3h2y_i2c_probe called
  355. <4>[ 1.788626] ######### s5k3h2y_sensor_power_up begin
  356. <4>[ 1.788868] ##### camera_power_onoff: on = 1
  357. <4>[ 1.789079] ##### camera_power_onoff: on = 1 end
  358. <4>[ 1.794248] msm_sensor_power_up: 693
  359. <4>[ 1.794268] ##### camera_power_onoff: on = 1
  360. <4>[ 1.794423] ##### camera_power_onoff: on = 1 end
  361. <4>[ 1.808014] ######### s5k3h2y_sensor_power_up end
  362. <4>[ 1.808771] msm_sensor id: 0x382b
  363. <4>[ 1.808786] sensor_name: s5k3h2y
  364. <4>[ 1.808798] camera_type: 0
  365. <3>[ 1.809011] msm_eeprom_probe probe_fail
  366. <6>[ 1.809644] msm_sensor_register mctl_node_name[0] = video1
  367. <4>[ 1.809669] s5k3h2y_sensor_power_down IN
  368. <4>[ 1.833158] msm_sensor_power_down
  369. <4>[ 1.833239] ##### camera_power_onoff: on = 0
  370. <4>[ 1.833401] ##### camera_power_onoff: on = 0 end
  371. <4>[ 1.833478] ##### camera_power_onoff: on = 0
  372. <4>[ 1.833541] ##### camera_power_onoff: on = 0 end
  373. <4>[ 1.833554] ######### s5k3h2y_sensor_i2c_probe end
  374. <4>[ 1.833646] ######### msm_sensor_init_module begin
  375. <4>[ 1.833718] s5k3h2y_sunny: probe of 0-0020 failed with error -14
  376. <4>[ 1.833831] msm_sensor_i2c_probe ov2675_i2c_probe called
  377. <4>[ 1.855923] msm_sensor_power_up: 693
  378. <4>[ 1.855939] ##### camera_power_onoff: on = 1
  379. <4>[ 1.856126] ##### camera_power_onoff: on = 1 end
  380. <4>[ 1.928616] msm_sensor id: 0x2656
  381. <4>[ 1.928631] sensor_name: ov2675
  382. <4>[ 1.928643] camera_type: 1
  383. <3>[ 1.928663] msm_eeprom_probe probe_fail
  384. <6>[ 1.929249] msm_sensor_register mctl_node_name[1] = video3
  385. <4>[ 1.931294] msm_sensor_power_down
  386. <4>[ 1.931373] ##### camera_power_onoff: on = 0
  387. <4>[ 1.931449] ##### camera_power_onoff: on = 0 end
  388. <6>[ 1.955031] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  389. <7>[ 1.955564] BATT: msm_battery_init, enter
  390. <7>[ 1.955798] BATT: msm_battery_init_rpc, rpc version charger=0x00010001, battery=0x00050001
  391. <7>[ 1.955903] BATT: msm_battery_probe, enter
  392. <7>[ 1.958659] BATT: msm_battery_probe, exit
  393. <7>[ 1.958813] BATT: msm_battery_init, exit
  394. <7>[ 1.959259] BATT: start charging
  395. <7>[ 1.959274] BATT: unknown changer inserted
  396. <7>[ 1.959286] BATT: charger type changed
  397. <7>[ 1.959298] BATT: unknown changer inserted
  398. <6>[ 1.959579] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  399. <6>[ 1.959644] Bluetooth: HCI UART driver ver 2.2
  400. <6>[ 1.959661] Bluetooth: HCI H4 protocol initialized
  401. <6>[ 1.959674] Bluetooth: HCI_IBS protocol initialized
  402. <6>[ 1.959688] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  403. <4>[ 1.960741] ###### lzj : msmsdcc_probe : begin 1
  404. <4>[ 1.960813] ###### lzj : msmsdcc_probe : is_dma_mode 1
  405. <4>[ 1.961134] ###### lzj : msmsdcc_probe : Setup pclk_src_dfab : 0
  406. <6>[ 1.961376] mmc0: mci-version: 0
  407. <4>[ 1.961479] ###### lzj : msmsdcc_probe : host->plat->cpu_dma_latency : 0
  408. <4>[ 1.961564] ###### lzj : msmsdcc_probe : sdiowakeup_irq : 0
  409. <3>[ 1.961581] mmc0: No card detect facilities available
  410. <6>[ 1.962458] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 80,0 dma 8 dmacrcri 12
  411. <6>[ 1.962479] mmc0: 8 bit data mode enabled
  412. <6>[ 1.962494] mmc0: 4 bit data mode disabled
  413. <6>[ 1.962508] mmc0: polling status mode disabled
  414. <6>[ 1.962524] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  415. <6>[ 1.962541] mmc0: Slot eject status = 0
  416. <6>[ 1.962553] mmc0: Power save feature enable = 1
  417. <6>[ 1.962571] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x24680000
  418. <6>[ 1.962591] mmc0: DM cmd busaddr 0x24680000, cmdptr busaddr 0x24697f40
  419. <4>[ 1.962676] ###### lzj : msmsdcc_probe : begin 1
  420. <4>[ 1.962719] ###### lzj : msmsdcc_probe : is_dma_mode 1
  421. <4>[ 1.963024] ###### lzj : msmsdcc_probe : Setup pclk_src_dfab : 0
  422. <6>[ 1.963279] mmc1: mci-version: 0
  423. <4>[ 1.963378] ###### lzj : msmsdcc_probe : host->plat->cpu_dma_latency : 0
  424. <4>[ 1.963463] ###### lzj : msmsdcc_probe : sdiowakeup_irq : 0
  425. <3>[ 1.963481] mmc1: No card detect facilities available
  426. <6>[ 1.963818] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 56,0 dma 8 dmacrcri 6
  427. <6>[ 1.963839] mmc1: 8 bit data mode disabled
  428. <6>[ 1.963853] mmc1: 4 bit data mode enabled
  429. <6>[ 1.963866] mmc1: polling status mode disabled
  430. <6>[ 1.963883] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  431. <6>[ 1.963899] mmc1: Slot eject status = 0
  432. <6>[ 1.963913] mmc1: Power save feature enable = 1
  433. <6>[ 1.963929] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x246a0000
  434. <6>[ 1.963949] mmc1: DM cmd busaddr 0x246a0000, cmdptr busaddr 0x246b7f40
  435. <4>[ 1.964014] ###### lzj : msmsdcc_probe : begin 1
  436. <4>[ 1.964063] ###### lzj : msmsdcc_probe : is_dma_mode 1
  437. <4>[ 1.964363] ###### lzj : msmsdcc_probe : Setup pclk_src_dfab : 0
  438. <6>[ 1.964598] mmc2: mci-version: 0
  439. <4>[ 1.964694] ###### lzj : msmsdcc_probe : host->plat->cpu_dma_latency : 0
  440. <4>[ 1.964769] ###### lzj : msmsdcc_probe : sdiowakeup_irq : 322
  441. <3>[ 1.964871] mmc2: No card detect facilities available
  442. <6>[ 1.965216] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 58,0 dma 8 dmacrcri 7
  443. <6>[ 1.965236] mmc2: 8 bit data mode disabled
  444. <6>[ 1.965251] mmc2: 4 bit data mode enabled
  445. <6>[ 1.965264] mmc2: polling status mode disabled
  446. <6>[ 1.965281] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  447. <6>[ 1.965298] mmc2: Slot eject status = 0
  448. <6>[ 1.965311] mmc2: Power save feature enable = 1
  449. <6>[ 1.965328] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x246c0000
  450. <6>[ 1.965348] mmc2: DM cmd busaddr 0x246c0000, cmdptr busaddr 0x246d7f40
  451. <7>[ 1.965733] Registered led device: button-backlight
  452. <3>[ 1.966223] tricolor_leds_backlight_init: module init
  453. <3>[ 1.966303] tricolor leds and flashlight: probe init
  454. <7>[ 1.966586] Registered led device: red
  455. <7>[ 1.966699] Registered led device: green
  456. <7>[ 1.966808] Registered led device: blue
  457. <7>[ 1.966921] Registered led device: flashlight
  458. <6>[ 1.967893] logger: created 64K log 'log_main'
  459. <6>[ 1.968133] logger: created 64K log 'log_events'
  460. <6>[ 1.968304] logger: created 64K log 'log_radio'
  461. <6>[ 1.968473] logger: created 64K log 'log_system'
  462. <1>[ 1.968666] Initializing cellon hwinfo device.
  463. <1>[ 1.968936] Succedded to initialize cellon device.
  464. <6>[ 1.970136] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  465. <3>[ 1.970761] msm_soc: ALSA MSM Mixer Setting
  466. <6>[ 1.971351] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  467. <6>[ 1.972113] __msm_rpc_connect: server not found 30000002:20001
  468. <7>[ 1.972134] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
  469. <6>[ 1.972159] ALSA device list:
  470. <6>[ 1.972171] #0: msm-audio
  471. <6>[ 1.972661] oprofile: using arm/armv7
  472. <6>[ 1.972836] Netfilter messages via NETLINK v0.30.
  473. <6>[ 1.972934] nf_conntrack version 0.5.0 (5038 buckets, 20152 max)
  474. <6>[ 1.973353] ctnetlink v0.93: registering with nfnetlink.
  475. <6>[ 1.973428] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  476. <6>[ 1.973614] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  477. <6>[ 1.974081] xt_time: kernel timezone is -0000
  478. <6>[ 1.974144] IPv4 over IPv4 tunneling driver
  479. <6>[ 1.974831] GRE over IPv4 demultiplexor driver
  480. <6>[ 1.975233] ip_tables: (C) 2000-2006 Netfilter Core Team
  481. <6>[ 1.975508] arp_tables: (C) 2002 David S. Miller
  482. <6>[ 1.975633] TCP cubic registered
  483. <6>[ 1.975896] NET: Registered protocol family 10
  484. <6>[ 1.978444] Mobile IPv6
  485. <6>[ 1.978511] ip6_tables: (C) 2000-2006 Netfilter Core Team
  486. <6>[ 1.978779] IPv6 over IPv4 tunneling driver
  487. <6>[ 1.980526] NET: Registered protocol family 17
  488. <6>[ 1.980581] NET: Registered protocol family 15
  489. <6>[ 1.980849] Bluetooth: RFCOMM TTY layer initialized
  490. <6>[ 1.980881] Bluetooth: RFCOMM socket layer initialized
  491. <6>[ 1.980896] Bluetooth: RFCOMM ver 1.11
  492. <6>[ 1.980911] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  493. <6>[ 1.980926] Bluetooth: BNEP filters: protocol
  494. <6>[ 1.980941] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  495. <6>[ 1.981079] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  496. <6>[ 1.981128] ThumbEE CPU extension supported.
  497. <6>[ 1.988111] clock_late_init() disabled 22 unused clocks
  498. <6>[ 1.990188] cpufreq: cpu0 init at 600000 switching to 480000
  499. <6>[ 1.991451] input: 7k_handset as /devices/virtual/input/input6
  500. <6>[ 2.002591] rs30000048 rs30000048.262144: setting system clock to 1980-01-06 00:09:10 UTC (315965350)
  501. <6>[ 2.004271] Freeing init memory: 216K
  502. <7>[ 2.034113] pmic_rpc_req_reply: successfully connected to 0x60001 rpc version
  503. <3>[ 2.042706] init: /init.qcom.rc: 489: invalid command '/system/bin/log'
  504. <3>[ 2.043501] init: /init.target.rc: 63: invalid command 'user'
  505. <3>[ 2.043541] init: /init.target.rc: 64: invalid command 'group'
  506. <4>[ 2.043809] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  507. <3>[ 2.043949] init: starting 'ueventd'
  508. <6>[ 2.164491] mmc0: new high speed MMC card at address 0001
  509. <6>[ 2.165388] mmcblk0: mmc0:0001 S5U00M 3.64 GiB
  510. <6>[ 2.168146] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 >
  511. <4>[ 2.172274] mmcblk0: p21 size 812951 extends beyond EOD, truncated
  512. <3>[ 2.248863] init: cannot open '/initlogo.rle'
  513. <6>[ 2.477728] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
  514. <4>[ 2.611169] EXT4-fs (mmcblk0p13): warning: mounting fs with errors, running e2fsck is recommended
  515. <6>[ 2.612219] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  516. <6>[ 2.623561] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
  517. <6>[ 2.630988] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1
  518. <3>[ 2.685153] init: starting 'comp-set'
  519. <3>[ 2.685693] init: starting 'dpi-set'
  520. <3>[ 2.725613] init: starting 'servicemanager'
  521. <3>[ 2.726236] init: starting 'vold'
  522. <3>[ 2.726744] init: starting 'qcom-usb-sh'
  523. <3>[ 2.727296] init: starting 'qcom-c_core-sh'
  524. <3>[ 2.727956] init: starting 'fakeperm'
  525. <3>[ 2.730546] init: starting 'b2g'
  526. <3>[ 2.731128] init: starting 'rilproxy'
  527. <3>[ 2.731716] init: starting 'netd'
  528. <3>[ 2.732243] init: starting 'debuggerd'
  529. <3>[ 2.732753] init: starting 'ril-daemon'
  530. <3>[ 2.733368] init: starting 'drm'
  531. <3>[ 2.733948] init: starting 'media'
  532. <3>[ 2.734546] init: starting 'dbus'
  533. <3>[ 2.735088] init: starting 'installd'
  534. <3>[ 2.735633] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  535. <3>[ 2.735749] init: starting 'keystore'
  536. <3>[ 2.736331] init: starting 'akmd'
  537. <3>[ 2.736844] init: starting 'qcom-c_main-sh'
  538. <6>[ 2.766744] warning: `rilproxy' uses 32-bit capabilities (legacy support in use)
  539. <3>[ 2.775308] init: cannot find '/system/xbin/alljoyn-daemon', disabling 'alljoyn'
  540. <3>[ 2.814224] init: cannot find '/system/bin/cnd', disabling 'cnd'
  541. <3>[ 2.814331] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
  542. <3>[ 2.814411] init: starting 'qcom-sh'
  543. <3>[ 2.814998] init: starting 'qcom-wifi'
  544. <3>[ 2.815681] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd'
  545. <3>[ 2.815764] init: cannot find '/system/bin/mm-pp-daemon', disabling 'ppd'
  546. <3>[ 2.815884] init: starting 'dsds_persist'
  547. <3>[ 2.816568] init: cannot find '/system/bin/wlan_tool', disabling 'wlan_tool'
  548. <3>[ 2.816694] init: starting 'qcamerasvr'
  549. <3>[ 2.841771] init: starting 'rmt_storage'
  550. <3>[ 2.842604] enable_store: android_usb: already disabled
  551. <6>[ 2.843243] adb_bind_config
  552. <3>[ 2.843483] init: starting 'adbd'
  553. <6>[ 2.868224] adb_open
  554. <3>[ 3.063208] init: starting 'qmuxd'
  555. <3>[ 3.079478] init: starting 'console'
  556. <3>[ 3.089263] init: starting 'netmgrd'
  557. <6>[ 3.116341] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=0
  558. <6>[ 3.135779] android_work: android_work: sent uevent USB_STATE=CONNECTED
  559. <6>[ 3.146468] android_usb gadget: high speed config #1: android
  560. <6>[ 3.146633]
  561. <6>[ 3.146638] Charger Type: STD DOWNSTREAM PORT
  562. <6>[ 3.198144] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  563. <6>[ 3.310021] EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=0
  564. <6>[ 3.516124] __msm_rpc_connect: server not found 30000002:20001
  565. <6>[ 3.516453] [snd.c:snd_ioctl] snd_avc_ctl 0
  566. <6>[ 3.517356] [snd.c:snd_ioctl] snd_agc_ctl 0
  567. <6>[ 3.536634] [snd.c:snd_ioctl] snd_set_volume 0 0 7
  568. <6>[ 3.537373] [snd.c:snd_ioctl] snd_set_volume 6 0 7
  569. <6>[ 3.538009] [snd.c:snd_ioctl] snd_set_volume 12 0 7
  570. <6>[ 3.538601] [snd.c:snd_ioctl] snd_set_volume 3 0 7
  571. <6>[ 3.539364] [snd.c:snd_ioctl] snd_set_volume 16 0 7
  572. <6>[ 3.539954] [snd.c:snd_ioctl] snd_set_volume 25 0 7
  573. <6>[ 3.540638] [snd.c:snd_ioctl] snd_set_volume 8 0 1
  574. <6>[ 3.541339] [snd.c:snd_ioctl] snd_set_volume 9 0 1
  575. <7>[ 3.578766] BATT: msm_battery_cb_func
  576. <6>[ 3.603269] [snd.c:snd_ioctl] snd_set_device 6 1 1
  577. <6>[ 3.604614] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 7
  578. <3>[ 3.639511] smd_pkt_open: DATA8_CNTL open failed -19
  579. <3>[ 3.639789] smd_pkt_open: DATA9_CNTL open failed -19
  580. <3>[ 3.639996] smd_pkt_open: DATA12_CNTL open failed -19
  581. <3>[ 3.640258] smd_pkt_open: DATA13_CNTL open failed -19
  582. <3>[ 3.640456] smd_pkt_open: DATA14_CNTL open failed -19
  583. <6>[ 3.746531] request_suspend_state: wakeup (3->0, old_sleep 0) at 3748553335 (1980-01-06 00:09:12.237016667 UTC)
  584. <6>[ 3.746546] request_suspend_state: end of function. new_state 0, old_state 0, requested_suspend_state 0
  585. <5>[ 3.748991] Boot Reason = 16
  586. <4>[ 3.778051] mipi_dsi_panel_c8680_power: on = 1
  587. <4>[ 3.778124] mipi_dsi_panel_c8680_power: 1666
  588. <4>[ 3.810454] mipi_otm9608a_lcd_on: Enter
  589. <4>[ 4.018063] mipi_otm9608a_lcd_on: Done
  590. <4>[ 4.030714] msm_fb_pan_display: 1806
  591. <5>[ 4.782556] Boot Reason = 16
  592. <4>[ 4.783204] enable evdev wakelock to block suspend
  593. <4>[ 4.786006] enable evdev wakelock to block suspend
  594. <4>[ 5.208454] enable evdev wakelock to block suspend
  595. <4>[ 6.328119] enable evdev wakelock to block suspend
  596. <4>[ 6.488713] enable evdev wakelock to block suspend
  597. <4>[ 7.468086] ################################mmc2: msmsdcc_runtime_suspend: start
  598. <7>[ 7.587524] BATT: msm_battery_cb_func
  599. <6>[ 8.304943] Calling CRDA to update world regulatory domain
  600. <6>[ 8.305008] World regulatory domain updated:
  601. <6>[ 8.305016] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  602. <6>[ 8.305029] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  603. <6>[ 8.305039] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  604. <6>[ 8.305051] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  605. <6>[ 8.305061] (5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A, 3000 mBm)
  606. <6>[ 8.305071] (5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)
  607. <6>[ 8.365791] [snd.c:snd_ioctl] snd_set_volume 0 0 7
  608. <6>[ 8.366376] [snd.c:snd_ioctl] snd_set_volume 6 0 7
  609. <6>[ 8.366893] [snd.c:snd_ioctl] snd_set_volume 12 0 7
  610. <6>[ 8.367429] [snd.c:snd_ioctl] snd_set_volume 3 0 7
  611. <6>[ 8.368236] [snd.c:snd_ioctl] snd_set_volume 16 0 7
  612. <3>[ 8.368284] ath6kl_pm_probe () enter and will invoke power-up sequence
  613. <6>[ 8.368296] wlan rest gpio - 124
  614. <7>[ 8.368581] pmapp_rpc_req_reply: successfully connected to 0x70001 rpc version
  615. <6>[ 8.369171] [snd.c:snd_ioctl] snd_set_volume 25 0 7
  616. <6>[ 8.370429] [snd.c:snd_ioctl] snd_set_volume 8 0 1
  617. <6>[ 8.370976] [snd.c:snd_ioctl] snd_set_volume 9 0 1
  618. <6>[ 8.371884] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 7
  619. <6>[ 8.434359] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 7
  620. <6>[ 8.479461] WLAN power-up success
  621. <3>[ 8.479823] android_readwrite_file: ret=2
  622. <3>[ 8.479869] android_readwrite_file: ret=2
  623. <3>[ 9.393798] smd_pkt_open: DATA8_CNTL open failed -19
  624. <3>[ 9.394608] smd_pkt_open: DATA9_CNTL open failed -19
  625. <3>[ 9.395316] smd_pkt_open: DATA12_CNTL open failed -19
  626. <3>[ 9.396161] smd_pkt_open: DATA13_CNTL open failed -19
  627. <3>[ 9.397013] smd_pkt_open: DATA14_CNTL open failed -19
  628. <4>[ 9.500541] mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
  629. <4>[ 9.519526] mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
  630. <4>[ 9.527914] mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
  631. <4>[ 9.529571] mmc2: queuing unknown CIS tuple 0x14 (0 bytes)
  632. <4>[ 9.533686] mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
  633. <4>[ 9.533773] mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
  634. <4>[ 9.533856] mmc2: queuing unknown CIS tuple 0x82 (1 bytes)
  635. <6>[ 9.533909] mmc2: new high speed SDIO card at address 0001
  636. <7>[ 9.535788] ath6kl: sdio new func 1 vendor 0x271 device 0x301 block 0x800/0x200
  637. <6>[ 9.535808] ath6kl use preallocated memory for dma buffer
  638. <7>[ 9.535974] ath6kl: 4-bit async irq mode enabled
  639. <7>[ 9.536186] ath6kl: sdio power on
  640. <7>[ 9.574148] ath6kl: target_ver 0x30000582 target_type 0x3 dataset_patch 0x57ff74 app_load_addr 0x1234
  641. <7>[ 9.574166] ath6kl: app_start_override_addr 0x0 board_ext_data_addr 0x542330 reserved_ram_size 0x200
  642. <7>[ 9.574178] ath6kl: refclk_hz 26000000 uarttx_pin 8
  643. <4>[ 9.590353] ath6kl: MAC from EEPROM 00:03:7F:05:C0:CA
  644. <4>[ 9.590371] ath6kl: MAC from nv item 88:F4:88:70:C4:E2
  645. <7>[ 9.596536] ath6kl: Unknown fw ie: 1
  646. <7>[ 9.596548] ath6kl: found otp image ie (3998 B)
  647. <7>[ 9.596561] ath6kl: found fw image ie (104407 B)
  648. <7>[ 9.596821] ath6kl: found patch image ie (312 B)
  649. <7>[ 9.596833] ath6kl: found firmware capabilities ie (2 B)
  650. <7>[ 9.596841] ath6kl: capabilities
  651. <7>[ 9.596851] 00000000: 96 02 00 00 ....
  652. <7>[ 9.596861] ath6kl: found patch address ie 0x57fec8
  653. <7>[ 9.596894] ath6kl: using fw api 3
  654. <7>[ 9.600164] ath6kl: hw start
  655. <3>[ 9.603719] ath6kl: temporary war to avoid sdio crc error
  656. <7>[ 9.605206] ath6kl: writing extended board data to 0x542330 (1024 B)
  657. <7>[ 9.608696] ath6kl: writing board file to 0x541f30 (1024 B)
  658. <7>[ 9.612209] ath6kl: writing otp to 0x1234 (3998 B)
  659. <7>[ 9.633866] ath6kl: app_start_override_addr (from hw) 0x945460
  660. <7>[ 9.633879] ath6kl: executing OTP at 0x945460
  661. <7>[ 9.656023] ath6kl: writing firmware to 0x1234 (104407 B)
  662. <7>[ 10.215486] ath6kl: writing patch to 0x57fec8 (312 B)
  663. <7>[ 10.227099] ath6kl: htc target ready credits 25 size 1664
  664. <7>[ 10.227113] ath6kl: htc using protocol >= 2.1 (1)
  665. <7>[ 10.227136] ath6kl: hif-scatter enabled requests 4 entries 16
  666. <7>[ 10.227146] ath6kl: htc bundling allowed msg_per_bndl_max 8
  667. <7>[ 10.227154] ath6kl: htc max_rx_bndl_sz 32768 max_tx_bndl_sz 12288
  668. <7>[ 10.229129] ath6kl: firmware booted
  669. <6>[ 10.229159] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.265 api 3
  670. <5>[ 10.522669] Boot Reason = 16
  671. <4>[ 11.079099] mipi_otm9608a_set_backlight, level = 10
  672. <4>[ 11.079873] mipi_otm9608a_set_backlight, level = 11
  673. <6>[ 11.080571] request_suspend_state: wakeup (0->0, old_sleep 0) at 11082595000 (1980-01-06 00:09:19.571058332 UTC)
  674. <6>[ 11.080586] request_suspend_state: end of function. new_state 0, old_state 0, requested_suspend_state 0
  675. <4>[ 11.096501] mipi_otm9608a_set_backlight, level = 12
  676. <4>[ 11.118294] mipi_otm9608a_set_backlight, level = 13
  677. <4>[ 11.229726] mipi_otm9608a_set_backlight, level = 14
  678. <4>[ 11.496153] mipi_otm9608a_set_backlight, level = 15
  679. <4>[ 11.544751] mipi_otm9608a_set_backlight, level = 16
  680. <4>[ 11.569518] mipi_otm9608a_set_backlight, level = 17
  681. <4>[ 11.577268] mipi_otm9608a_set_backlight, level = 18
  682. <4>[ 11.590843] mipi_otm9608a_set_backlight, level = 19
  683. <4>[ 11.652661] mipi_otm9608a_set_backlight, level = 20
  684. <3>[ 11.674499] init: starting 'qcom-post-boot'
  685. <3>[ 11.843871] init: no such service 'mpdecision'
  686. <3>[ 12.385418] init: starting 'wpa_supplicant'
  687. <6>[ 12.452168] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  688. <4>[ 21.143144] mipi_otm9608a_set_backlight, level = 0
  689. <6>[ 21.143368] request_suspend_state: sleep (0->3, old_sleep 0) at 21145393329 (1980-01-06 00:09:29.633856661 UTC)
  690. <6>[ 21.143379] request_suspend_state: goto late resume.state 1
  691. <6>[ 21.143399] request_suspend_state: end of function. new_state 3, old_state 0, requested_suspend_state 3
  692. <6>[ 21.143428] early_suspend: state 1
  693. <6>[ 21.147088] himax->himax_ts_suspend_2132:Himax TS Suspend
  694. <6>[ 21.147113] himax->himax_ts_suspend_2136:disable IRQ 304,count[0]
  695. <6>[ 21.147129] himax->himax_ts_sleep_1209:
  696. <6>[ 21.398683] himax->himax_ts_sleep_1233:himax TP entry deepsleep mode
  697. <4>[ 21.428093] mipi_otm9608a_lcd_off: Enter
  698. <4>[ 21.558153] mipi_otm9608a_lcd_off: Done
  699. <4>[ 21.559916] mipi_dsi_panel_c8680_power: on = 0
  700. <4>[ 26.588273] ################################mmc0: msmsdcc_runtime_suspend: start
  701. <6>[ 26.588694] mmc0: msmsdcc_enable: mmc->suspend_task:70 current:70
  702. <6>[ 42.586419] rmt_storage_event_open_cb: open callback received
  703. <6>[ 42.586488] open partition /boot/modem_fs1 handle=1
  704. <6>[ 42.588584] rmt_storage_event_user_data_cb: send user data callback received
  705. <6>[ 42.592448] rmt_storage_event_open_cb: open callback received
  706. <6>[ 42.592506] open partition /boot/modem_fs2 handle=2
  707. <6>[ 42.594249] rmt_storage_event_user_data_cb: send user data callback received
  708. <6>[ 42.595916] rmt_storage_event_write_iovec_cb: write iovec callback received
  709. <6>[ 42.867814] rmt_storage_ioctl: send status ioctl
  710. <4>[ 47.868268] ################################mmc0: msmsdcc_runtime_suspend: start
  711. <6>[ 47.868693] mmc0: msmsdcc_enable: mmc->suspend_task:70 current:70
  712. <3>[ 104.140034] report_hs_key: keycode = 81, key_parm = 0
  713. <6>[ 104.140283] report_hs_key: received key event: 107 from rpc
  714. <4>[ 104.147603] msm_fb_set_backlight: lcd_updated = 0
  715. <6>[ 104.147926] request_suspend_state: wakeup (3->0, old_sleep 1) at 104149943787 (1980-01-06 00:10:52.638407118 UTC)
  716. <6>[ 104.147938] request_suspend_state: goto late resume.state 2
  717. <6>[ 104.147968] request_suspend_state: end of function. new_state 0, old_state 1, requested_suspend_state 0
  718. <4>[ 104.178163] mipi_dsi_panel_c8680_power: on = 1
  719. <4>[ 104.210804] mipi_otm9608a_lcd_on: Enter
  720. <3>[ 104.290981] report_hs_key: keycode = 81, key_parm = 255
  721. <6>[ 104.291046] report_hs_key: received key event: 107 from rpc
  722. <4>[ 104.418129] mipi_otm9608a_lcd_on: Done
  723. <6>[ 104.418406] himax->himax_ts_resume_2160:himax TS Resume
  724. <6>[ 104.478068] himax->himax_ts_active_1244:reset device success
  725. <6>[ 104.538299] himax->himax_ts_poweron_1195:OK addr = 0x4a
  726. <4>[ 104.628128] mipi_otm9608a_set_backlight, level = 20
  727. <6>[ 104.668039] himax->himax_ts_active_1251:himax entry active mode
  728. <6>[ 104.668093] himax->himax_ts_resume_2164:enabling IRQ 304,count[0]
  729. <6>[ 104.668134] himax->charger_notifier_call_883:charger status change charger[0],current[1]
  730. <3>[ 104.673299] himax->report_function_1054:himax tp data is error finger [15],report_key[0]
  731. <3>[ 117.383668] report_hs_key: keycode = 81, key_parm = 0
  732. <6>[ 117.383719] report_hs_key: received key event: 107 from rpc
  733. <3>[ 117.554428] report_hs_key: keycode = 81, key_parm = 255
  734. <6>[ 117.554593] report_hs_key: received key event: 107 from rpc
  735. <4>[ 117.705308] mipi_otm9608a_set_backlight, level = 0
  736. <6>[ 117.705526] request_suspend_state: sleep (0->3, old_sleep 0) at 117707553292 (1980-01-06 00:11:06.196016624 UTC)
  737. <6>[ 117.705539] request_suspend_state: goto late resume.state 1
  738. <6>[ 117.705568] request_suspend_state: end of function. new_state 3, old_state 0, requested_suspend_state 3
  739. <6>[ 117.705604] early_suspend: state 1
  740. <6>[ 117.709198] himax->himax_ts_suspend_2132:Himax TS Suspend
  741. <6>[ 117.709214] himax->himax_ts_suspend_2136:disable IRQ 304,count[0]
  742. <6>[ 117.709226] himax->himax_ts_sleep_1209:
  743. <6>[ 117.968536] himax->himax_ts_sleep_1233:himax TP entry deepsleep mode
  744. <4>[ 117.998114] mipi_otm9608a_lcd_off: Enter
  745. <4>[ 118.129488] mipi_otm9608a_lcd_off: Done
  746. <4>[ 118.131113] mipi_dsi_panel_c8680_power: on = 0
  747. <4>[ 123.158571] ################################mmc0: msmsdcc_runtime_suspend: start
  748. <6>[ 123.159003] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
  749. <4>[ 131.108296] ################################mmc0: msmsdcc_runtime_suspend: start
  750. <6>[ 131.108728] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
  751. <4>[ 136.198299] ################################mmc0: msmsdcc_runtime_suspend: start
  752. <6>[ 136.198558] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
  753. <7>[ 309.315071] BATT: msm_battery_cb_func
  754. <4>[ 422.638278] ################################mmc0: msmsdcc_runtime_suspend: start
  755. <6>[ 422.638699] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
  756. <4>[ 433.049806] ################################mmc0: msmsdcc_runtime_suspend: start
  757. <6>[ 433.050246] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
  758. <4>[ 514.238739] ################################mmc0: msmsdcc_runtime_suspend: start
  759. <6>[ 514.239164] mmc0: msmsdcc_enable: mmc->suspend_task:27 current:27
Advertisement
RAW Paste Data Copied
Advertisement