cnxsoft

ODROID-XU3 Lite Boot (No HDMI)

Nov 11th, 2014
882
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot 2012.07-00008-ge2d58a1-dirty (Aug 08 2014 - 20:57:19) for Exynos5422
  2.  
  3. CPU: Exynos5422 Rev0.1 [Samsung SOC on SMP Platform Base on ARM CortexA7]
  4. APLL = 800MHz, KPLL = 800MHz
  5. MPLL = 532MHz, BPLL = 825MHz
  6.  
  7. Board: XYREF5422
  8. DRAM: 2 GiB
  9. WARNING: Caches not enabled
  10.  
  11. TrustZone Enabled BSP
  12. BL1 version: �/��
  13. VDD_KFC: 0x44
  14. LDO19: 0xf2
  15.  
  16. Checking Boot Mode ... SDMMC
  17. MMC: S5P_MSHC2: 0, S5P_MSHC0: 1
  18. MMC Device 0: 14.7 GiB
  19. MMC Device 1: 14.7 GiB
  20. MMC Device 2: MMC Device 2 not found
  21. there are pending interrupts 0x00000001
  22. *** Warning - bad CRC, using default environment
  23.  
  24. In: serial
  25. Out: serial
  26. Err: serial
  27. Net: No ethernet found.
  28. Press 'Enter' or 'Space' to stop autoboot: 0
  29. reading boot.ini
  30.  
  31. 2064 bytes read
  32. Loading boot.ini from FAT
  33. Find boot.ini file from FAT/Ext4 Area!!
  34. boot.ini command = setenv initrd_high "0xffffffff"
  35. boot.ini command = setenv fdt_high "0xffffffff"
  36. boot.ini command = setenv macaddr "00:1e:06:61:7a:39"
  37. boot.ini command = setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root
  38. =UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro"
  39. boot.ini command = setenv bootcmd "fatload mmc 0:1 0x40008000 zImage; fatload mm
  40. c 0:1 0x42000000 uInitrd; fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb; b
  41. ootz 0x40008000 0x42000000 0x44000000"
  42. boot.ini command = setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macadd
  43. r=${macaddr}"
  44. boot.ini command = boot
  45. reading zImage
  46.  
  47. 3177656 bytes read
  48. reading uInitrd
  49.  
  50. 2099284 bytes read
  51. reading exynos5422-odroidxu3.dtb
  52.  
  53. 51625 bytes read
  54. ## Loading init Ramdisk from Legacy Image at 42000000 ...
  55. Image Name: uInitrd 3.10.58
  56. Image Type: ARM Linux RAMDisk Image (uncompressed)
  57. Data Size: 2099220 Bytes = 2 MiB
  58. Load Address: 00000000
  59. Entry Point: 00000000
  60. ## Flattened Device Tree blob at 44000000
  61. Booting using the fdt blob at 0x44000000
  62. Using Device Tree in place at 44000000, end 4400f9a8
  63.  
  64. Starting kernel ...
  65.  
  66. [ 0.000000] [c0] Booting Linux on physical CPU 0x100
  67. [ 0.000000] [c0] Initializing cgroup subsys cpu
  68. [ 0.000000] [c0] Initializing cgroup subsys cpuacct
  69. [ 0.000000] [c0] Linux version 3.10.58+ (root@THEserver) (gcc version 4.6.x-g
  70. oogle 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 23 01:21:51 UTC 2014
  71. [ 0.000000] [c0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c53
  72. 87d
  73. [ 0.000000] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instr
  74. uction cache
  75. [ 0.000000] [c0] Machine: ODROID-XU3, model: Hardkernel odroid-xu3 board base
  76. d on EXYNOS5422
  77. [ 0.000000] [c0] ION: Contiguous 0x6650000 bytes @ 0x0 defined for 0:common
  78. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 2:mfc_sh
  79. [ 0.000000] [c0] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
  80. [ 0.000000] [c0] ION: Contiguous 0x6000000 bytes @ 0x0 defined for 11:video
  81. [ 0.000000] [c0] ION: Contiguous 0x1000000 bytes @ 0x0 defined for 7:mfc_inpu
  82. t
  83. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 9:sectbl
  84. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 8:mfc_fw
  85. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 12:mfc_nfw
  86. [ 0.000000] [c0] ION: Contiguous 0x400000 bytes @ 0x0 defined for 13:secdma
  87. [ 0.000000] [c0] cma: CMA: reserved 104 MiB at b8000000
  88. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b7c00000
  89. [ 0.000000] [c0] cma: CMA: reserved 8 MiB at b7400000
  90. [ 0.000000] [c0] cma: CMA: reserved 96 MiB at b1400000
  91. [ 0.000000] [c0] cma: CMA: reserved 16 MiB at b0400000
  92. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at b0000000
  93. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at afc00000
  94. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af800000
  95. [ 0.000000] [c0] cma: CMA: reserved 4 MiB at af400000
  96. [ 0.000000] [c0] cma: CMA: reserved 256 MiB at 5f800000
  97. [ 0.000000] [c0] Memory policy: ECC disabled, Data cache writealloc
  98. [ 0.000000] [c0] create_mapping_memory: section: 40000000 ~ 6f800000
  99. [ 0.000000] [c0] CPU EXYNOS5422 (id 0xe5422001)
  100. [ 0.000000] [c0] PERCPU: Embedded 9 pages/cpu @c1d90000 s14784 r8192 d13888 u
  101. 36864
  102. [ 0.000000] [c0] Built 1 zonelists in Zone order, mobility grouping on. Tota
  103. l pages: 517136
  104. [ 0.000000] [c0] Kernel command line: console=tty1 console=ttySAC2,115200n8 r
  105. oot=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro smsc95xx.macaddr=00:1e
  106. :06:61:7a:39
  107. [ 0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  108. [ 0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 by
  109. tes)
  110. [ 0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 byte
  111. s)
  112. [ 0.000000] [c0] Memory: 2026MB = 2026MB total
  113. [ 0.000000] [c0] Memory: 1528608k/1528608k available, 546016k reserved, 10465
  114. 28K highmem
  115. [ 0.000000] [c0] Virtual kernel memory layout:
  116. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  117. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  118. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  119. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  120. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  121. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  122. [ 0.000000] .text : 0xc0008000 - 0xc084100c (8421 kB)
  123. [ 0.000000] .init : 0xc0842000 - 0xc08a89c0 ( 411 kB)
  124. [ 0.000000] .data : 0xc08aa000 - 0xc091a054 ( 449 kB)
  125. [ 0.000000] .bss : 0xc091a054 - 0xc0d81720 (4510 kB)
  126. [ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  127. [ 0.000000] [c0] Preemptible hierarchical RCU implementation.
  128. [ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
  129. [ 0.000000] [c0] apll 800000000
  130. [ 0.000000] [c0] bpll 825000000
  131. [ 0.000000] [c0] cpll 666000000
  132. [ 0.000000] [c0] dpll 600000000
  133. [ 0.000000] [c0] epll 180633609
  134. [ 0.000000] [c0] rpll 66000000
  135. [ 0.000000] [c0] ipll 432000000
  136. [ 0.000000] [c0] spll 800000000
  137. [ 0.000000] [c0] dout_spll_ctrl_div2 400000000
  138. [ 0.000000] [c0] vpll 400000000
  139. [ 0.000000] [c0] mpll 532000000
  140. [ 0.000000] [c0] Clock enables : TOP, MIF
  141. [ 0.000000] [c0] mmc0: dout_mmc0 666000000
  142. [ 0.000000] [c0] mmc1: dout_mmc1 800000000
  143. [ 0.000000] [c0] mmc2: dout_mmc2 666000000
  144. [ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
  145. [ 0.000000] [c0] [g2d_init_clock:313] aclk_333_g2d:333000000
  146. [ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 30000000
  147. 0
  148. [ 0.000000] [c0] [jpeg_clock_init:368]jpeg: dout_aclk_300_jpeg 300000000 aclk
  149. _300_jpeg 300000000
  150. [ 0.000000] [c0] mfc: aclk_333 400000000
  151. [ 0.000000] [c0] Exynos5422: clock setup completed
  152. [ 0.000000] [c0] Exynos: pwm: clock setup completed
  153. [ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
  154. 178956ms
  155. [ 0.000000] [c0] Switching to timer-based delay loop
  156. [ 0.000000] [c0] EXYNOS5422 PMU Initialize
  157. [ 0.000000] [c0] Console: colour dummy device 80x30
  158. [ 0.000000] [c0] console [tty1] enabled
  159. [ 0.000000] [c0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
  160. Ingo Molnar
  161. [ 0.000000] [c0] ... MAX_LOCKDEP_SUBCLASSES: 8
  162. [ 0.000000] [c0] ... MAX_LOCK_DEPTH: 48
  163. [ 0.000000] [c0] ... MAX_LOCKDEP_KEYS: 8191
  164. [ 0.000000] [c0] ... CLASSHASH_SIZE: 4096
  165. [ 0.000000] [c0] ... MAX_LOCKDEP_ENTRIES: 16384
  166. [ 0.000000] [c0] ... MAX_LOCKDEP_CHAINS: 32768
  167. [ 0.000000] [c0] ... CHAINHASH_SIZE: 16384
  168. [ 0.000000] [c0] memory used by lock dependency info: 3679 kB
  169. [ 0.000000] [c0] per task-struct memory footprint: 1152 bytes
  170. [ 0.006644] [c0] Calibrating delay loop (skipped), value calculated using tim
  171. er frequency.. 48.00 BogoMIPS (lpj=120000)
  172. [ 0.006738] [c0] pid_max: default: 32768 minimum: 301
  173. [ 0.007254] [c0] Mount-cache hash table entries: 512
  174. [ 0.043293] [c0] Initializing cgroup subsys debug
  175. [ 0.043368] [c0] Initializing cgroup subsys freezer
  176. [ 0.043618] [c0] CPU: Testing write buffer coherency: ok
  177. [ 0.043718] [c0] ftrace: allocating 21428 entries in 63 pages
  178. [ 0.090720] [c0] /cpus/cpu@0 missing clock-frequency property
  179. [ 0.090786] [c0] /cpus/cpu@1 missing clock-frequency property
  180. [ 0.090833] [c0] /cpus/cpu@2 missing clock-frequency property
  181. [ 0.090879] [c0] /cpus/cpu@3 missing clock-frequency property
  182. [ 0.090923] [c0] /cpus/cpu@4 missing clock-frequency property
  183. [ 0.090966] [c0] /cpus/cpu@5 missing clock-frequency property
  184. [ 0.091010] [c0] /cpus/cpu@6 missing clock-frequency property
  185. [ 0.091054] [c0] /cpus/cpu@7 missing clock-frequency property
  186. [ 0.091151] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  187. [ 0.091359] [c0] Running under secure firmware.
  188. [ 0.091434] [c0] Setting up static identity map for 0xc05db670 - 0xc05db6c8
  189. [ 0.091491] [c0] Exynos-SnapShot: exynos_ss_init failed
  190. [ 0.111843] [c0] ftrace: Allocated trace_printk buffers
  191. [ 0.133748] [c1] CPU1: Booted secondary processor
  192. [ 0.133775] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  193. [ 0.143763] [c2] CPU2: Booted secondary processor
  194. [ 0.143788] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  195. [ 0.153726] [c3] CPU3: Booted secondary processor
  196. [ 0.153754] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  197. [ 0.162676] [c4] CPU4: Booted secondary processor
  198. [ 0.163451] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  199. [ 0.172697] [c5] CPU5: Booted secondary processor
  200. [ 0.173452] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  201. [ 0.182689] [c6] CPU6: Booted secondary processor
  202. [ 0.183465] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  203. [ 0.192692] [c7] CPU7: Booted secondary processor
  204. [ 0.193468] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  205. [ 0.193727] [c0] Brought up 8 CPUs
  206. [ 0.194053] [c0] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  207. [ 0.194095] [c0] CPU: All CPU(s) started in SVC mode.
  208. [ 0.196568] [c0] devtmpfs: initialized
  209. [ 0.234838] [c6] sched: registering cpufreq notifiers for scale-invariant loa
  210. ds
  211. [ 0.237191] [c6] pinctrl core: initialized pinctrl subsystem
  212. [ 0.239169] [c4] regulator-dummy: no parameters
  213. [ 0.250931] [c5] NET: Registered protocol family 16
  214. [ 0.251235] [c5] DMA: preallocated 256 KiB pool for atomic coherent allocatio
  215. ns
  216. [ 0.322315] [c7] syscon 10040000.system-controller: regmap [mem 0x10040000-0x
  217. 10044fff] registered
  218. [ 0.323077] [c4] syscon 10050000.syscon: regmap [mem 0x10050000-0x10054fff] r
  219. egistered
  220. [ 0.337405] [c4] hw-breakpoint: Failed to enable monitor mode on CPU 4.
  221. [ 0.337422] [c2] hw-breakpoint: Failed to enable monitor mode on CPU 2.
  222. [ 0.339352] [c7] S3C Power Management, Copyright 2004 Simtec Electronics
  223. [ 0.344614] [c4] PM DOMAIN: pd-cam has a new child pd-isp.
  224. [ 0.345320] [c4] PM DOMAIN: pd-gscl has a new child pd-cam.
  225. [ 0.345367] [c4] EXYNOS5: PM Domain Initialize
  226. [ 0.345662] [c4] pd-gscl - on
  227. [ 0.345844] [c4] pd-isp - on
  228. [ 0.345876] [c4] pd-mfc - on, always
  229. [ 0.345908] [c4] pd-g3d - on, always
  230. [ 0.345942] [c4] pd-disp1 - on, always
  231. [ 0.346127] [c4] pd-maudio - on
  232. [ 0.346158] [c4] pd-g2d - on, always
  233. [ 0.346341] [c4] pd-mscl - on
  234. [ 0.346374] [c4] pd-fsys - on, always
  235. [ 0.346408] [c4] pd-psgen - on, always
  236. [ 0.346440] [c4] pd-peric - on, always
  237. [ 0.346471] [c4] pd-wcore - on, always
  238. [ 0.346656] [c4] pd-cam - on
  239. [ 0.346693] [c4] EXYNOS: Initializing architecture
  240. [ 0.349026] [c7] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
  241. [ 0.349070] [c7] exynos-sysmmu 10a60000.sysmmu: [OK]
  242. [ 0.349408] [c7] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
  243. [ 0.349449] [c7] exynos-sysmmu 10a70000.sysmmu: [OK]
  244. [ 0.349794] [c7] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
  245. [ 0.349834] [c7] exynos-sysmmu 14650000.sysmmu: [OK]
  246. [ 0.350164] [c7] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
  247. [ 0.350204] [c7] exynos-sysmmu 13e80000.sysmmu: [OK]
  248. [ 0.350525] [c7] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
  249. [ 0.350564] [c7] exynos-sysmmu 13e90000.sysmmu: [OK]
  250. [ 0.350893] [c7] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
  251. [ 0.350932] [c7] exynos-sysmmu 12880000.sysmmu: [OK]
  252. [ 0.351263] [c7] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
  253. [ 0.351303] [c7] exynos-sysmmu 12890000.sysmmu: [OK]
  254. [ 0.351638] [c7] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
  255. [ 0.351677] [c7] exynos-sysmmu 128a0000.sysmmu: [OK]
  256. [ 0.352008] [c7] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
  257. [ 0.352048] [c7] exynos-sysmmu 128c0000.sysmmu: [OK]
  258. [ 0.352377] [c7] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
  259. [ 0.352416] [c7] exynos-sysmmu 128d0000.sysmmu: [OK]
  260. [ 0.352745] [c7] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
  261. [ 0.352784] [c7] exynos-sysmmu 128e0000.sysmmu: [OK]
  262. [ 0.353108] [c7] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
  263. [ 0.353147] [c7] exynos-sysmmu 11f10000.sysmmu: [OK]
  264. [ 0.353477] [c7] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
  265. [ 0.353516] [c7] exynos-sysmmu 11f20000.sysmmu: [OK]
  266. [ 0.353926] [c7] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
  267. [ 0.353966] [c7] exynos-sysmmu 11200000.sysmmu: [OK]
  268. [ 0.354291] [c7] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
  269. [ 0.354330] [c7] exynos-sysmmu 11210000.sysmmu: [OK]
  270. [ 0.354682] [c7] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd
  271. [ 0.354721] [c7] exynos-sysmmu 14640000.sysmmu: [OK]
  272. [ 0.355075] [c7] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd
  273. [ 0.355114] [c7] exynos-sysmmu 14680000.sysmmu: [OK]
  274. [ 0.355778] [c4] CPU Info : Samsung Exynos5422 Soc is BIN1
  275. [ 0.355814] [c4] Exynos5422 ASV : Use Fusing Speed Group 3
  276. [ 0.355845] [c4] Exynos5422 ASV : invalid IDS value
  277. [ 0.355875] [c4] EXYNOS5422 ASV : IDS : 0 HPM : 0
  278. [ 0.355934] [c4] VDD_ARM ASV group is 3
  279. [ 0.355971] [c4] VDD_KFC ASV group is 3
  280. [ 0.356000] [c4] VDD_INT ASV group is 3
  281. [ 0.356030] [c4] VDD_MIF ASV group is 3
  282. [ 0.356058] [c4] VDD_G3D ASV group is 3
  283. [ 0.356087] [c4] VDD_ISP ASV group is 3
  284. [ 0.413543] [c6] bio: create slab <bio-0> at 0
  285. [ 0.416398] [c4] VUSB_BOOST_5V: 5000 mV
  286. [ 0.417184] [c5] MAIN_DC: no parameters
  287. [ 0.417994] [c6] hdmi-en: no parameters
  288. [ 0.420865] [c5] SCSI subsystem initialized
  289. [ 0.423714] [c6] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
  290. [ 0.423788] [c6] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified
  291. , using clock at index 0 as parent
  292. [ 0.423841] [c6] s3c64xx-spi 131a0000.spi: number of chip select lines not sp
  293. ecified, assuming 1 chip select line
  294. [ 0.424272] [c6] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
  295. [ 0.424342] [c6] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified
  296. , using clock at index 0 as parent
  297. [ 0.424393] [c6] s3c64xx-spi 131b0000.spi: number of chip select lines not sp
  298. ecified, assuming 1 chip select line
  299. [ 0.426456] [c7] usbcore: registered new interface driver usbfs
  300. [ 0.426824] [c7] usbcore: registered new interface driver hub
  301. [ 0.427306] [c4] usbcore: registered new device driver usb
  302. [ 0.435056] [c7] vdd_mif: 700 <--> 1300 mV at 1100 mV
  303. [ 0.436480] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
  304. [ 0.437892] [c5] vdd_int: 800 <--> 1400 mV at 1000 mV
  305. [ 0.439359] [c6] vdd_g3d: 700 <--> 1400 mV at 1000 mV
  306. [ 0.440775] [c7] vdd_kfc: 800 <--> 1500 mV at 1025 mV
  307. [ 0.442491] [c4] vddf_2v85: 2850 mV
  308. [ 0.444140] [c5] vdd_adc: 1800 mV
  309. [ 0.445689] [c6] vdd_pll: 1800 mV
  310. [ 0.447241] [c6] vdd_ldo6: 1000 mV
  311. [ 0.448834] [c6] vdd_ldo7: 1800 mV
  312. [ 0.450380] [c7] vdd_ldo8: 1800 mV
  313. [ 0.451943] [c4] vdd_ldo9: 3300 mV
  314. [ 0.453488] [c5] vdd_ldo10: 1800 mV
  315. [ 0.455147] [c6] vdd_ldo11: 1000 mV
  316. [ 0.456509] [c4] vdd_ldo13: 1800 <--> 3300 mV at 3300 mV
  317. [ 0.458068] [c5] vdd_ldo15: 3300 mV
  318. [ 0.459658] [c6] vdd_eth: 3300 mV
  319. [ 0.461213] [c7] vdd_ldo18: 1800 mV
  320. [ 0.462727] [c4] LDO19: ramp_delay not set
  321. [ 0.462761] [c4] vdd_ldo19: set_voltage_time_sel() failed: -22
  322. [ 0.463235] [c4] vdd_ldo19: 2850 mV
  323. [ 0.464571] [c5] vdd_mifs: 800 <--> 1100 mV at 950 mV
  324. [ 0.466126] [c6] vdd_ldo26: 3000 mV
  325. [ 0.467374] [c6] vdd_g3ds: 800 <--> 1100 mV at 975 mV
  326. [ 0.469018] [c6] vdd_ldo28: 3300 mV
  327. [ 0.475104] [c6] i2c-gpio i2c_gpio.13: using pins 33 (SDA) and 23 (SCL)
  328. [ 0.475957] [c6] s3c-i2c 12c60000.i2c: slave address 0x00
  329. [ 0.479762] [c6] s3c-i2c 12c60000.i2c: i2c-3: S3C I2C adapter
  330. [ 0.480048] [c6] s3c-i2c 12c70000.i2c: slave address 0x00
  331. [ 0.480572] [c6] s3c-i2c 12c70000.i2c: i2c-4: S3C I2C adapter
  332. [ 0.480840] [c6] s3c-i2c 12c80000.i2c: slave address 0x00
  333. [ 0.482161] [c7] s3c-i2c 12c80000.i2c: i2c-5: S3C I2C adapter
  334. [ 0.482870] [c4] media: Linux media interface: v0.10
  335. [ 0.483225] [c6] Linux video capture interface: v2.00
  336. [ 0.487844] [c4] IOVMMU: Created debugfs entry at debugfs/iovmm
  337. [ 0.489230] [c6] Advanced Linux Sound Architecture Driver Initialized.
  338. [ 0.489845] [c6] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
  339. [ 0.489904] [c6] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung El
  340. ectronics
  341. [ 0.497008] [c7] Switching to clocksource mct-frc
  342. [ 0.590505] [c7] NET: Registered protocol family 2
  343. [ 0.592006] [c7] TCP established hash table entries: 8192 (order: 4, 65536 by
  344. tes)
  345. [ 0.592557] [c7] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  346. [ 0.594534] [c7] TCP: Hash tables configured (established 8192 bind 8192)
  347. [ 0.594671] [c7] TCP: reno registered
  348. [ 0.594718] [c7] UDP hash table entries: 512 (order: 3, 40960 bytes)
  349. [ 0.595020] [c7] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  350. [ 0.596136] [c7] NET: Registered protocol family 1
  351. [ 0.596650] [c7] Unpacking initramfs...
  352. [ 0.741442] [c7] Freeing initrd memory: 2044K (c2001000 - c2200000)
  353. [ 0.756802] [c6] bounce pool size: 64 pages
  354. [ 0.778265] [c7] VFS: Disk quotas dquot_6.5.2
  355. [ 0.778895] [c7] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  356. [ 0.783629] [c7] ROMFS MTD (C) 2007 Red Hat, Inc.
  357. [ 0.784094] [c7] msgmni has been set to 1457
  358. [ 0.787926] [c7] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma
  359. jor 250)
  360. [ 0.787995] [c7] io scheduler noop registered
  361. [ 0.788027] [c7] io scheduler deadline registered
  362. [ 0.788501] [c7] io scheduler cfq registered (default)
  363. [ 0.801924] [c7] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-236420
  364. 8
  365. [ 0.801974] [c7] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_
  366. Peri-1 Num_Events-32
  367. [ 0.816060] [c7] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-236420
  368. 8
  369. [ 0.816109] [c7] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_
  370. Peri-32 Num_Events-32
  371. [ 0.830009] [c7] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-236420
  372. 8
  373. [ 0.830059] [c7] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_
  374. Peri-32 Num_Events-32
  375. [ 0.837219] [c7] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208
  376. [ 0.837266] [c7] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_P
  377. eri-16 Num_Events-6
  378. [ 1.119494] [c7] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  379. [ 1.123965] [c7] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a
  380. S3C6400/10
  381. [ 1.124908] [c7] samsung-pinctrl 14010000.pinctrl: pin gpa0-7 already request
  382. ed by 12c80000.i2c; cannot claim for 12c10000.serial
  383. [ 1.124967] [c7] samsung-pinctrl 14010000.pinctrl: pin-178 (12c10000.serial)
  384. status -22
  385. [ 1.125011] [c7] samsung-pinctrl 14010000.pinctrl: could not request pin 178
  386. on device samsung-pinctrl
  387. [ 1.125056] [c7] samsung-uart 12c10000.serial: Error applying setting, revers
  388. e things back
  389. [ 1.125213] [c7] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a
  390. S3C6400/10
  391. [ 1.126232] [c7] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a
  392. S3C6400/10
  393. [ 2.712595] [c7] console [ttySAC2] enabled
  394. [ 2.717721] [c7] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a
  395. S3C6400/10
  396. [ 2.727893] [c7] [drm] Initialized drm 1.1.0 20060810
  397. [ 2.740729] [c7] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  398. [ 2.746376] [c7] [drm] No driver support for vblank timestamp query.
  399. [ 2.752753] [c7] exynos-mixer 14450000.mixer: probe start
  400. [ 2.758357] [c7] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_compo
  401. nent_ops)
  402. [ 2.766832] [c7] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_compone
  403. nt_ops)
  404. [ 2.774295] [c7] exynos-drm exynos-drm: No connectors reported connected with
  405. modes
  406. [ 2.781348] [c7] [drm] Cannot find any crtc or sizes - going 1024x768
  407. [ 2.798361] [c7] Console: switching to colour frame buffer device 128x48
  408. [ 2.810251] [c7] exynos-drm exynos-drm: fb0: frame buffer device
  409. [ 2.816265] [c7] exynos-drm exynos-drm: registered panic notifier
  410. [ 2.822347] [c7] [drm] Initialized exynos 1.0.0 20110530 on minor 0
  411. [ 2.832420] [c4] mali 11800000.mali: GPU identified as 0x0620 r0p1 status 0
  412. [ 2.839603] mali 11800000.mali: Probed as mali0
  413. [ 2.855654] [c5] loop: module loaded
  414. [ 2.860254] [c5] tun: Universal TUN/TAP device driver, 1.6
  415. [ 2.864396] [c5] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  416. [ 2.871975] [c5] usbcore: registered new interface driver asix
  417. [ 2.877135] [c5] usbcore: registered new interface driver cdc_ether
  418. [ 2.883404] [c5] usbcore: registered new interface driver smsc95xx
  419. [ 2.889536] [c5] usbcore: registered new interface driver zaurus
  420. [ 2.899804] [c5] samsung-pinctrl 13400000.pinctrl: does not have pin group gp
  421. c1-0
  422. [ 2.909001] [c5] samsung-pinctrl 13400000.pinctrl: invalid group gpc1-0 in ma
  423. p table
  424. [ 2.918441] [c5] samsung-pinctrl 13400000.pinctrl: does not have pin group gp
  425. c1-0
  426. [ 2.927552] [c5] samsung-pinctrl 13400000.pinctrl: could not map group config
  427. for "gpc1-0"
  428. [ 2.938670] [c5] samsung-pinctrl 13400000.pinctrl: does not have pin group gp
  429. c1-0
  430. [ 2.947769] [c5] samsung-pinctrl 13400000.pinctrl: invalid group gpc1-0 in ma
  431. p table
  432. [ 2.957040] [c5] samsung-pinctrl 13400000.pinctrl: does not have pin group gp
  433. c1-0
  434. [ 2.966011] [c5] samsung-pinctrl 13400000.pinctrl: could not map group config
  435. for "gpc1-0"
  436. [ 2.975733] exynos-dwc3 usb.1: failed to configure pins
  437. [ 3.386558] [c5] dwc3 12400000.dwc3: dwc3_otg address space is not supported
  438. [ 3.396334] [c5] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
  439. [ 3.405233] [c5] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  440. [ 3.413586] [c5] ehci-s5p: EHCI s5p driver
  441. [ 3.419592] [c5] s5p-ehci 12110000.usb: EHCI Host Controller
  442. [ 3.426678] [c5] s5p-ehci 12110000.usb: new USB bus registered, assigned bus
  443. number 1
  444. [ 3.436024] [c5] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
  445. [ 3.452234] [c5] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  446. [ 3.461635] [c5] hub 1-0:1.0: USB hub found
  447. [ 3.467065] [c5] hub 1-0:1.0: 3 ports detected
  448. [ 3.474292] [c5] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  449. [ 3.482554] [c5] exynos-ohci 12120000.usb: EXYNOS OHCI Host Controller
  450. [ 3.490321] [c5] exynos-ohci 12120000.usb: new USB bus registered, assigned b
  451. us number 2
  452. [ 3.499678] [c5] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000
  453. [ 3.568040] [c5] hub 2-0:1.0: USB hub found
  454. [ 3.573570] [c5] hub 2-0:1.0: 3 ports detected
  455. [ 3.580867] [c5] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  456. [ 3.587900] [c5] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned b
  457. us number 3
  458. [ 3.597331] [c5] xhci-hcd xhci-hcd.2.auto: irq 104, io mem 0x12000000
  459. [ 3.606489] [c5] hub 3-0:1.0: USB hub found
  460. [ 3.611705] [c5] hub 3-0:1.0: 1 port detected
  461. [ 3.617621] [c5] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  462. [ 3.624524] [c5] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned b
  463. us number 4
  464. [ 3.635369] [c5] hub 4-0:1.0: USB hub found
  465. [ 3.640563] [c5] hub 4-0:1.0: 1 port detected
  466. [ 3.647154] [c5] usbcore: registered new interface driver usb-storage
  467. [ 3.655292] [c5] usbcore: registered new interface driver usbserial
  468. [ 3.662837] [c5] usbcore: registered new interface driver usbserial_generic
  469. [ 3.671049] [c5] usbserial: USB Serial support registered for generic
  470. [ 3.680578] [c5] mousedev: PS/2 mouse device common for all mice
  471. [ 3.691738] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr: enable WTSR
  472. [ 3.699200] [c5] s2m-rtc s2m-rtc: s2m_rtc_enable_smpl: enable SMPL
  473. [ 3.706772] [c5] s2m_rtc_enable_smpl: WTSR_SMPL(0xc7)
  474. [ 3.714620] [c5] s2m_rtc_read_time: 2013/1/1 0:7:9(2)
  475. [ 3.720973] [c5] s2m_rtc_read_alarm: 2000/1/1 12:0:0(0)
  476. [ 3.728942] [c5] s2m_rtc_read_time: 2013/1/1 0:7:9(2)
  477. [ 3.735608] [c5] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
  478. [ 3.744302] [c5] i2c /dev entries driver
  479. [ 3.753657] [c5] IR NEC protocol handler initialized
  480. [ 3.759593] [c5] IR RC5(x) protocol handler initialized
  481. [ 3.765753] [c5] IR RC6 protocol handler initialized
  482. [ 3.771648] [c5] IR JVC protocol handler initialized
  483. [ 3.777464] [c5] IR Sony protocol handler initialized
  484. [ 3.783329] [c5] IR RC5 (streamzap) protocol handler initialized
  485. [ 3.787358] [c6] usb 1-1: new high-speed USB device number 2 using s5p-ehci
  486. [ 3.797908] [c5] IR SANYO protocol handler initialized
  487. [ 3.803861] [c5] IR MCE Keyboard/mouse protocol handler initialized
  488. [ 3.812637] [c5] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
  489. [ 3.820816] [c5] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
  490. [ 3.828709] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM
  491. from 0x10000000.
  492. [ 3.838218] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM
  493. from 0x50000000.
  494. [ 3.847686] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM
  495. from 0x70000000.
  496. [ 3.857137] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM
  497. from 0x80000000.
  498. [ 3.866579] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM
  499. from 0xb0000000.
  500. [ 3.875935] [c5] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM
  501. from 0xd0000000.
  502. [ 3.886258] [c5] ion_cma ion_mfc_nfw: Alread isolated!
  503. [ 3.894224] [c5] TRIMINFO[0] = 0x806830
  504. [ 3.898676] [c5] TMU_CONTROL[0] = 0x10609803
  505. [ 3.903586] [c5] CURRENT_TEMP[0] = 0x4a
  506. [ 3.908033] [c5] THRESHOLD_TEMP_RISE[0] = 0x85807b76
  507. [ 3.913621] [c5] THRESHOLD_TEMP_FALL[0] = 0x837e7974
  508. [ 3.919173] [c5] INTEN[0] = 0x11111111
  509. [ 3.919767] [c6] hub 1-1:1.0: USB hub found
  510. [ 3.919975] [c6] hub 1-1:1.0: 5 ports detected
  511. [ 3.933086] [c5] INTCLEAR[0] = 0x0
  512. [ 3.936983] [c5] TRIMINFO[1] = 0x806e34
  513. [ 3.941281] [c5] TMU_CONTROL[1] = 0x10609803
  514. [ 3.946019] [c5] CURRENT_TEMP[1] = 0x4f
  515. [ 3.950294] [c5] THRESHOLD_TEMP_RISE[1] = 0x89847f7a
  516. [ 3.955745] [c5] THRESHOLD_TEMP_FALL[1] = 0x87827d78
  517. [ 3.961199] [c5] INTEN[1] = 0x11111111
  518. [ 3.965396] [c5] INTCLEAR[1] = 0x0
  519. [ 3.969261] [c5] TRIMINFO[2] = 0x80763e
  520. [ 3.973477] [c5] TMU_CONTROL[2] = 0x10609803
  521. [ 3.978147] [c5] CURRENT_TEMP[2] = 0x52
  522. [ 3.982353] [c5] THRESHOLD_TEMP_RISE[2] = 0x8a85807b
  523. [ 3.987708] [c5] THRESHOLD_TEMP_FALL[2] = 0x88837e79
  524. [ 3.993049] [c5] INTEN[2] = 0x11111111
  525. [ 3.997138] [c5] INTCLEAR[2] = 0x0
  526. [ 4.000911] [c5] TRIMINFO[3] = 0x806f35
  527. [ 4.005059] [c5] TMU_CONTROL[3] = 0x10609803
  528. [ 4.009634] [c5] CURRENT_TEMP[3] = 0x50
  529. [ 4.013761] [c5] THRESHOLD_TEMP_RISE[3] = 0x8a85807b
  530. [ 4.019037] [c5] THRESHOLD_TEMP_FALL[3] = 0x88837e79
  531. [ 4.024318] [c5] INTEN[3] = 0x11111111
  532. [ 4.028376] [c5] INTCLEAR[3] = 0x0
  533. [ 4.032065] [c5] TRIMINFO[4] = 0x807135
  534. [ 4.036130] [c5] TMU_CONTROL[4] = 0x10609803
  535. [ 4.040618] [c5] CURRENT_TEMP[4] = 0x54
  536. [ 4.044631] [c5] THRESHOLD_TEMP_RISE[4] = 0x938e8984
  537. [ 4.049769] [c5] THRESHOLD_TEMP_FALL[4] = 0x918c8782
  538. [ 4.054915] [c5] INTEN[4] = 0x11111111
  539. [ 4.058809] [c5] INTCLEAR[4] = 0x0
  540. [ 4.064592] [c5] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disa
  541. bled, irq disabled
  542. [ 4.075995] [c5] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
  543. dm-devel@redhat.com
  544. [ 4.086150] [c5] cpuidle: using governor ladder
  545. [ 4.092820] [c5] cpuidle: using governor menu
  546. [ 4.097918] [c5] Synopsys Designware Multimedia Card Interface Driver
  547. [ 4.106087] [c5] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 A
  548. ddr:13410000.pinctrl Val:3 Num:4
  549. [ 4.116661] [c5] dwmmc_exynos 12200000.dwmmc0: dw_mci_parse_dt : emmc h/w res
  550. et gpio[69] notifier registered.
  551. [ 4.127276] [c5] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
  552. [ 4.135036] [c5] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
  553. [ 4.141760] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
  554. [ 4.148402] [c6] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107,
  555. 64 bit host data width, 64 deep fifo
  556. [ 4.177255] [c6] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400
  557. 000Hz, actual 385416HZ div = 27)
  558. [ 4.202490] [c6] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
  559. [ 4.207478] [c7] usb 1-1.1: new high-speed USB device number 3 using s5p-ehci
  560. [ 4.217635] [c0] 12200000.dwmmc0: no interrupts handled, pending 00000000 000
  561. 00000
  562. [ 4.218003] [c6] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 A
  563. ddr:13410000.pinctrl Val:3 Num:4
  564. [ 4.218169] [c6] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
  565. [ 4.218182] [c6] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
  566. [ 4.218191] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
  567. [ 4.218562] [c6] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109,
  568. 64 bit host data width, 64 deep fifo
  569. [ 4.218921] [c6] mmc1: vmmc regulator found
  570. [ 4.219126] [c6] mmc1: vqmmc regulator found
  571. [ 4.237244] [c6] mmc_host mmc1: Bus speed (slot 0) = 20812500Hz (slot req 400
  572. 000Hz, actual 385416HZ div = 27)
  573. [ 4.252397] [c6] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
  574. [ 4.253815] [c4] leds-gpio leds.15: pins are not configured from the driver
  575. [ 4.256895] [c6] ledtrig-cpu: registered to indicate activity on CPUs
  576. [ 4.257250] [c6] S5P ACE Driver(SLIMSSS), (c) 2013 Samsung Electronics
  577. [ 4.257952] [c6] ACE: ecb-aes-s5p-ace
  578. [ 4.258184] [c6] ACE: cbc-aes-s5p-ace
  579. [ 4.258415] [c6] ACE: ctr-aes-s5p-ace
  580. [ 4.258645] [c6] ACE: xts-aes-s5p-ace
  581. [ 4.258896] [c6] ACE: sha1-s5p-ace
  582. [ 4.259130] [c6] ACE: sha256-s5p-ace
  583. [ 4.259137] [c6] ACE driver is initialized
  584. [ 4.261585] [c6] usbcore: registered new interface driver usbhid
  585. [ 4.261592] [c6] usbhid: USB HID core driver
  586. [ 4.263090] [c6] exynos-adc 12d10000.adc: operating without regulator vdd[-19
  587. ]
  588. [ 4.263877] [c6] exynos-adc 12d10000.adc: Probed successfully driver.
  589. [ 4.265009] [c6] odroid-fan odroid_fan.14: unable to request PWM, trying lega
  590. cy API
  591. [ 4.265155] [c6] pwm-samsung: tin parent at 66600000
  592. [ 4.471151] [c6] INA231 3-0040: I2C write error: (-6) reg: 0x0
  593. [ 4.478678] [c6] INA231 3-0040: ============= Probe INA231 Fail! : sensor_arm
  594. (0xFFFFFFFA) =============
  595. [ 4.490319] [c6] INA231 3-0041: I2C write error: (-6) reg: 0x0
  596. [ 4.497296] [c4] smsc95xx v1.0.4
  597. [ 4.502515] [c6] INA231 3-0041: ============= Probe INA231 Fail! : sensor_mem
  598. (0xFFFFFFFA) =============
  599. [ 4.514134] [c6] INA231 3-0044: I2C write error: (-6) reg: 0x0
  600. [ 4.521703] [c6] INA231 3-0044: ============= Probe INA231 Fail! : sensor_g3d
  601. (0xFFFFFFFA) =============
  602. [ 4.533389] [c6] INA231 3-0045: I2C write error: (-6) reg: 0x0
  603. [ 4.541023] [c6] INA231 3-0045: ============= Probe INA231 Fail! : sensor_kfc
  604. (0xFFFFFFFA) =============
  605. [ 4.551743] [c7] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-12110000
  606. .usb-1.1, smsc95xx USB 2.0 Ethernet, 00:1e:06:61:7a:39
  607. [ 4.569365] [c6] i2c-core: driver [INA231] using legacy suspend method
  608. [ 4.577701] [c6] i2c-core: driver [INA231] using legacy resume method
  609. [ 4.587562] [c6] ioboard-bh1780 2-0029: I2C write byte error: data=0x8b
  610. [ 4.595852] [c6]
  611. [ 4.595852] =================== ioboard_bh1780_probe FAIL! ==================
  612. =
  613. [ 4.595852]
  614. [ 4.614466] [c6] i2c-core: driver [ioboard-bh1780] using legacy suspend metho
  615. d
  616. [ 4.623283] [c6] i2c-core: driver [ioboard-bh1780] using legacy resume method
  617. [ 4.633675] [c6]
  618. [ 4.633675] =================== ioboard_bmp180_probe FAIL! ==================
  619. =
  620. [ 4.633675]
  621. [ 4.652064] [c6] i2c-core: driver [ioboard-bmp180] using legacy suspend metho
  622. d
  623. [ 4.660801] [c6] i2c-core: driver [ioboard-bmp180] using legacy resume method
  624. [ 4.666576] [c5] mmc0: BKOPS_EN bit is not set
  625. [ 4.676036] [c6] samsung-pinctrl 14010000.pinctrl: pin gpb3-2 already request
  626. ed by 12c70000.i2c; cannot claim for ioboard_key_led.12
  627. [ 4.685187] [c5] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 40
  628. 0000Hz, actual 398325HZ div = 209)
  629. [ 4.685254] [c5] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 16
  630. 6500000Hz, actual 166500000HZ div = 0)
  631. [ 4.685392] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 16
  632. 6500000Hz, actual 166500000HZ div = 1)
  633. [ 4.685444] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 20
  634. 0000000Hz, actual 166500000HZ div = 1)
  635. [ 4.686069] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  636. [ 4.686185] [c5] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  637. [ 4.686792] [c0] dwmmc_exynos 12200000.dwmmc0: End bit error
  638. [ 4.686888] [c5] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
  639. [ 4.687048] [c5] dwmmc_exynos 12200000.dwmmc0: divratio: 1 map: 0x 00000077
  640. [ 4.687058] [c5] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x 77 best_sample
  641. : 0x 01
  642. [ 4.687809] [c5] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 200
  643. 000000Hz, actual 41625000HZ div = 0)
  644. [ 4.687845] [c5] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 416
  645. 25000Hz, actual 41625000HZ div = 0)
  646. [ 4.688943] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 41
  647. 625000Hz, actual 41625000HZ div = 4)
  648. [ 4.688981] [c5] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 20
  649. 0000000Hz, actual 166500000HZ div = 1)
  650. [ 4.689777] [c5] mmc0: new HS200-DDR MMC card at address 0001
  651. [ 4.690912] [c7] mmcblk0: mmc0:0001 SDW16G 14.6 GiB
  652. [ 4.691230] [c7] mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
  653. [ 4.691537] [c7] mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
  654. [ 4.691828] [c7] mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
  655. [ 4.694444] [c7] mmcblk0: p1 p2
  656. [ 4.702787] [c7] mmcblk0boot1: unknown partition table
  657. [ 4.705412] [c7] mmcblk0boot0: unknown partition table
  658. [ 4.757543] [c7] mmc_host mmc1: Bus speed (slot 0) = 41625000Hz (slot req 400
  659. 000Hz, actual 392688HZ div = 53)
  660. [ 4.757608] [c7] mmc_host mmc1: Bus speed (slot 0) = 41625000Hz (slot req 416
  661. 25000Hz, actual 41625000HZ div = 0)
  662. [ 4.757943] [c7] mmc1: new high speed SDHC card at address 59b4
  663. [ 4.759468] [c7] mmcblk1: mmc1:59b4 SD 14.7 GiB
  664. [ 4.761747] [c7] mmcblk1: p1 p2
  665. [ 4.937743] [c6] samsung-pinctrl 14010000.pinctrl: pin-209 (ioboard_key_led.1
  666. 2) status -22
  667. [ 4.947533] [c6] samsung-pinctrl 14010000.pinctrl: could not request pin 209
  668. on device samsung-pinctrl
  669. [ 4.958366] [c6] ioboard-keyled ioboard_key_led.12: Error applying setting, r
  670. everse things back
  671. [ 4.969217] [c6]
  672. [ 4.969217] =================== ioboard_keyled_probe ===================
  673. [ 4.969217]
  674. [ 5.019709] [c6] wait_until_ready : timeout error!!
  675. [ 5.026123] [c6] ioboard_spi_id_read : ready error!
  676. [ 5.032503] [c6]
  677. [ 5.032503] =================== ioboard_spi_probe FAIL! ===================
  678. [ 5.032503]
  679. [ 5.050109] [c6] ioboard-spi: probe of spi1.0 failed with error -1
  680. [ 5.063686] [c6] lpass_register_subip: i2s(ddc5c410) registered
  681. [ 5.097431] [c6] max98090 1-0010: MAX98090 REVID=0x43
  682. [ 5.110539] [c6] odroid-audio sound.11: HiFi <-> samsung-i2s-sec mapping ok
  683. [ 5.119524] [c6] odroid-audio sound.11: HiFi <-> samsung-i2s-sec mapping ok
  684. [ 5.131671] [c6] Netfilter messages via NETLINK v0.30.
  685. [ 5.138796] [c6] arp_tables: (C) 2002 David S. Miller
  686. [ 5.145341] [c6] TCP: cubic registered
  687. [ 5.150442] [c6] Initializing XFRM netlink socket
  688. [ 5.158884] [c6] NET: Registered protocol family 10
  689. [ 5.166870] [c6] mip6: Mobile IPv6
  690. [ 5.171489] [c6] sit: IPv6 over IPv4 tunneling driver
  691. [ 5.181115] [c6] NET: Registered protocol family 17
  692. [ 5.187264] [c6] NET: Registered protocol family 15
  693. [ 5.193347] [c6] NET: Registered protocol family 35
  694. [ 5.199551] [c6] VFP support v0.3: implementor 41 architecture 4 part 30 vari
  695. ant f rev 0
  696. [ 5.208814] [c6] Registering SWP/SWPB emulation handler
  697. [ 5.215170] [c6] SRAM ASV group [3] : MIF(950000), G3D(975000)
  698. [ 5.231444] [c6] registered taskstats version 1
  699. [ 5.237324] [c6] hdmi-en: disabling
  700. [ 5.241845] [c6] MAIN_DC: disabling
  701. [ 5.246393] [c6] VUSB_BOOST_5V: disabling
  702. [ 5.251500] [c6] regulator-dummy: disabling
  703. [ 5.258651] [c6] input: gpio_keys.7 as /devices/gpio_keys.7/input/input0
  704. [ 5.269453] [c6] s2m_rtc_read_time: 2013/1/1 0:7:11(2)
  705. [ 5.275769] [c6] s2m-rtc s2m-rtc: setting system clock to 2013-01-01 00:07:11
  706. UTC (1356998831)
  707. [ 5.285592] [c6] CPUFREQ of CA7 L0 : 1300000 uV
  708. [ 5.291346] [c6] CPUFREQ of CA7 L0 : ABB 8
  709. [ 5.296632] [c6] CPUFREQ of CA7 L1 : 1287500 uV
  710. [ 5.302269] [c6] CPUFREQ of CA7 L1 : ABB 4
  711. [ 5.307441] [c6] CPUFREQ of CA7 L2 : 1237500 uV
  712. [ 5.313027] [c6] CPUFREQ of CA7 L2 : ABB 4
  713. [ 5.318108] [c6] CPUFREQ of CA7 L3 : 1187500 uV
  714. [ 5.323598] [c6] CPUFREQ of CA7 L3 : ABB 4
  715. [ 5.328559] [c6] CPUFREQ of CA7 L4 : 1137500 uV
  716. [ 5.333897] [c6] CPUFREQ of CA7 L4 : ABB 4
  717. [ 5.338744] [c6] CPUFREQ of CA7 L5 : 1100000 uV
  718. [ 5.343991] [c6] CPUFREQ of CA7 L5 : ABB 4
  719. [ 5.348763] [c6] CPUFREQ of CA7 L6 : 1062500 uV
  720. [ 5.353965] [c6] CPUFREQ of CA7 L6 : ABB 4
  721. [ 5.358688] [c6] CPUFREQ of CA7 L7 : 1025000 uV
  722. [ 5.363796] [c6] CPUFREQ of CA7 L7 : ABB 4
  723. [ 5.368421] [c6] CPUFREQ of CA7 L8 : 987500 uV
  724. [ 5.373348] [c6] CPUFREQ of CA7 L8 : ABB 255
  725. [ 5.378067] [c6] CPUFREQ of CA7 L9 : 950000 uV
  726. [ 5.382925] [c6] CPUFREQ of CA7 L9 : ABB 255
  727. [ 5.387549] [c6] CPUFREQ of CA7 L10 : 912500 uV
  728. [ 5.392453] [c6] CPUFREQ of CA7 L10 : ABB 255
  729. [ 5.397068] [c6] CPUFREQ of CA7 L11 : 900000 uV
  730. [ 5.401889] [c6] CPUFREQ of CA7 L11 : ABB 255
  731. [ 5.406506] [c6] CPUFREQ of CA7 L12 : 900000 uV
  732. [ 5.411283] [c6] CPUFREQ of CA7 L12 : ABB 255
  733. [ 5.415853] [c6] CPUFREQ of CA7 L13 : 900000 uV
  734. [ 5.420576] [c6] CPUFREQ of CA7 L13 : ABB 255
  735. [ 5.425093] [c6] CPUFREQ of CA7 L14 : 900000 uV
  736. [ 5.429762] [c6] CPUFREQ of CA7 L14 : ABB 255
  737. [ 5.434522] [c6] kfc clock[800000], mx_mspll clock[666000]
  738. [ 5.440131] [c6] [SET_EMA_TEST] volt : 887500 value : 0x44
  739. [ 5.445850] [c6] [SET_EMA_TEST] volt : 937500 value : 0x44
  740. [ 5.451443] [c6] [SET_EMA_TEST] volt : 1032500 value : 0x33
  741. [ 5.457109] [c6] [SET_EMA_TEST] volt : 1142500 value : 0x11
  742. [ 5.462728] [c6] [SET_EMA_TEST] volt : 1167500 value : 0x11
  743. [ 5.468335] [c6] CPUFREQ of CA15 L0 : 1362500 uV
  744. [ 5.472977] [c6] CPUFREQ of CA15 L0 : ABB 8
  745. [ 5.477130] [c6] CPUFREQ of CA15 L1 : 1362500 uV
  746. [ 5.481781] [c6] CPUFREQ of CA15 L1 : ABB 8
  747. [ 5.485986] [c6] CPUFREQ of CA15 L2 : 1362500 uV
  748. [ 5.490543] [c6] CPUFREQ of CA15 L2 : ABB 8
  749. [ 5.494736] [c6] CPUFREQ of CA15 L3 : 1337500 uV
  750. [ 5.499276] [c6] CPUFREQ of CA15 L3 : ABB 255
  751. [ 5.503700] [c6] CPUFREQ of CA15 L4 : 1287500 uV
  752. [ 5.508306] [c6] CPUFREQ of CA15 L4 : ABB 255
  753. [ 5.512729] [c6] CPUFREQ of CA15 L5 : 1212500 uV
  754. [ 5.517338] [c6] CPUFREQ of CA15 L5 : ABB 255
  755. [ 5.521707] [c6] CPUFREQ of CA15 L6 : 1162500 uV
  756. [ 5.526378] [c6] CPUFREQ of CA15 L6 : ABB 255
  757. [ 5.530800] [c6] CPUFREQ of CA15 L7 : 1125000 uV
  758. [ 5.535403] [c6] CPUFREQ of CA15 L7 : ABB 255
  759. [ 5.539830] [c6] CPUFREQ of CA15 L8 : 1087500 uV
  760. [ 5.544437] [c6] CPUFREQ of CA15 L8 : ABB 255
  761. [ 5.548864] [c6] CPUFREQ of CA15 L9 : 1050000 uV
  762. [ 5.553467] [c6] CPUFREQ of CA15 L9 : ABB 255
  763. [ 5.557906] [c6] CPUFREQ of CA15 L10 : 1025000 uV
  764. [ 5.562587] [c6] CPUFREQ of CA15 L10 : ABB 255
  765. [ 5.567046] [c6] CPUFREQ of CA15 L11 : 1012500 uV
  766. [ 5.571790] [c6] CPUFREQ of CA15 L11 : ABB 255
  767. [ 5.576308] [c6] CPUFREQ of CA15 L12 : 987500 uV
  768. [ 5.580917] [c6] CPUFREQ of CA15 L12 : ABB 255
  769. [ 5.585432] [c6] CPUFREQ of CA15 L13 : 962500 uV
  770. [ 5.590031] [c6] CPUFREQ of CA15 L13 : ABB 255
  771. [ 5.594561] [c6] CPUFREQ of CA15 L14 : 937500 uV
  772. [ 5.599155] [c6] CPUFREQ of CA15 L14 : ABB 255
  773. [ 5.603669] [c6] CPUFREQ of CA15 L15 : 912500 uV
  774. [ 5.608276] [c6] CPUFREQ of CA15 L15 : ABB 255
  775. [ 5.612791] [c6] CPUFREQ of CA15 L16 : 900000 uV
  776. [ 5.617399] [c6] CPUFREQ of CA15 L16 : ABB 255
  777. [ 5.621854] [c6] CPUFREQ of CA15 L17 : 900000 uV
  778. [ 5.626518] [c6] CPUFREQ of CA15 L17 : ABB 255
  779. [ 5.631036] [c6] CPUFREQ of CA15 L18 : 900000 uV
  780. [ 5.635607] [c6] CPUFREQ of CA15 L18 : ABB 255
  781. [ 5.640090] [c6] CPUFREQ of CA15 L19 : 900000 uV
  782. [ 5.644706] [c6] CPUFREQ of CA15 L19 : ABB 255
  783. [ 5.649209] [c6] CPUFREQ of CA15 L20 : 900000 uV
  784. [ 5.653819] [c6] CPUFREQ of CA15 L20 : ABB 255
  785. [ 5.658355] [c6] CPUFREQ of CA15 L21 : 900000 uV
  786. [ 5.662915] [c6] CPUFREQ of CA15 L21 : ABB 255
  787. [ 5.667427] [c6] CPUFREQ of CA15 L22 : 900000 uV
  788. [ 5.671963] [c6] CPUFREQ of CA15 L22 : ABB 255
  789. [ 5.676816] [c6] eagle clock[800000], mpll clock[800000]
  790. [ 5.686688] [c6] Exynos: Kernel Thermal management registered
  791. [ 5.692048] [c6] ### dt-test ### No testcase data in device tree; not running
  792. tests
  793. [ 5.736340] [c6] MIF 825000Khz ASV is 962500uV
  794. [ 5.740091] [c6] DEVFREQ(MIF) : 825000Khz, ABB 14
  795. [ 5.744731] [c6] MIF 728000Khz ASV is 925000uV
  796. [ 5.749160] [c6] DEVFREQ(MIF) : 728000Khz, ABB 14
  797. [ 5.753843] [c6] MIF 633000Khz ASV is 887500uV
  798. [ 5.758280] [c6] DEVFREQ(MIF) : 633000Khz, ABB 14
  799. [ 5.762984] [c6] MIF 543000Khz ASV is 862500uV
  800. [ 5.767411] [c6] DEVFREQ(MIF) : 543000Khz, ABB 14
  801. [ 5.772069] [c6] MIF 413000Khz ASV is 800000uV
  802. [ 5.776540] [c6] DEVFREQ(MIF) : 413000Khz, ABB 14
  803. [ 5.781233] [c6] MIF 275000Khz ASV is 775000uV
  804. [ 5.785665] [c6] DEVFREQ(MIF) : 275000Khz, ABB 14
  805. [ 5.790361] [c6] MIF 206000Khz ASV is 775000uV
  806. [ 5.794794] [c6] DEVFREQ(MIF) : 206000Khz, ABB 14
  807. [ 5.799493] [c6] MIF 165000Khz ASV is 775000uV
  808. [ 5.803924] [c6] DEVFREQ(MIF) : 165000Khz, ABB 14
  809. [ 5.808629] [c6] MIF 138000Khz ASV is 775000uV
  810. [ 5.813060] [c6] DEVFREQ(MIF) : 138000Khz, ABB 14
  811. [ 5.819019] [c6] MIF: set ASV freq 825000, voltage 962500
  812. [ 5.824895] [c4] INT 600000Khz ASV is 950000uV
  813. [ 5.828778] [c4] DEVFREQ(INT) : 600000Khz, ABB 255
  814. [ 5.833540] [c4] INT 500000Khz ASV is 937500uV
  815. [ 5.837978] [c4] DEVFREQ(INT) : 500000Khz, ABB 255
  816. [ 5.842760] [c4] INT 480000Khz ASV is 937500uV
  817. [ 5.847206] [c4] DEVFREQ(INT) : 480000Khz, ABB 255
  818. [ 5.851929] [c4] INT 460000Khz ASV is 937500uV
  819. [ 5.856415] [c4] DEVFREQ(INT) : 460000Khz, ABB 255
  820. [ 5.861190] [c4] INT 440000Khz ASV is 937500uV
  821. [ 5.865635] [c4] DEVFREQ(INT) : 440000Khz, ABB 255
  822. [ 5.870407] [c4] INT 420000Khz ASV is 937500uV
  823. [ 5.874850] [c4] DEVFREQ(INT) : 420000Khz, ABB 255
  824. [ 5.879630] [c4] INT 400000Khz ASV is 900000uV
  825. [ 5.884058] [c4] DEVFREQ(INT) : 400000Khz, ABB 255
  826. [ 5.888850] [c4] INT 333000Khz ASV is 875000uV
  827. [ 5.893268] [c4] DEVFREQ(INT) : 333000Khz, ABB 255
  828. [ 5.898064] [c4] INT 222000Khz ASV is 850000uV
  829. [ 5.902493] [c4] DEVFREQ(INT) : 222000Khz, ABB 255
  830. [ 5.907282] [c4] INT 111000Khz ASV is 850000uV
  831. [ 5.911686] [c4] DEVFREQ(INT) : 111000Khz, ABB 14
  832. [ 5.916406] [c4] INT 83000Khz ASV is 850000uV
  833. [ 5.920743] [c4] DEVFREQ(INT) : 83000Khz, ABB 14
  834. [ 6.927182] [c5] PM DOMAIN: Power off unused power domains.
  835. [ 6.932700] [c5] ALSA device list:
  836. [ 6.935699] [c5] pd-cam: Power-off latency exceeded, new value 3019375 ns
  837. [ 6.942540] [c4] #0: odroid-audio
  838. [ 6.947019] [c4] Freeing unused kernel memory: 408K (c0842000 - c08a8000)
  839. Loading, please wait...
  840. [ 7.000299] [c7] systemd-udevd[1588]: starting version 204
  841. Begin: Loading essential drivers ... done.
  842. Begin: Running /scripts/init-premount ... done.
  843. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  844. Begin: Running /scripts/local-premount ... done.
  845. [ 7.435785] [c5] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mo
  846. de. Opts: (null)
  847. Begin: Running /scripts/local-bottom ... done.
  848. done.
  849. Begin: Running /scripts/init-bottom ... done.
  850. [ 7.719421] [c6] init: plymouth-upstart-bridge main process (1656) terminated
  851. with status 1
  852. [ 7.727699] [c6] init: plymouth-upstart-bridge main process ended, respawning
  853. [ 7.765641] [c6] init: plymouth-upstart-bridge main process (1665) terminated
  854. with status 1
  855. [ 7.773890] [c6] init: plymouth-upstart-bridge main process ended, respawning
  856. [ 7.795901] [c6] init: plymouth-upstart-bridge main process (1669) terminated
  857. with status 1
  858. [ 7.804032] [c6] init: plymouth-upstart-bridge main process ended, respawning
  859. [ 7.961390] [c5] init: mounted-proc main process (1681) terminated with statu
  860. s 1
  861. [ 8.110682] [c5] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  862. * Starting Mount filesystems on boot[ OK ]
  863. * Starting Populate and link to /run filesystem[ OK ]
  864. * Stopping Populate and link to /run filesystem[ OK ]
  865. * Stopping Track if upstart is running in a container[ OK ]
  866. * Starting Clean /tmp directory[ OK ]
  867. * Starting Initialize or finalize resolvconf[ OK ]
  868. * Stopping Clean /tmp directory[ OK ]
  869. * Starting Signal sysvinit that the rootfs is mounted[ OK ]
  870. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  871. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  872. * Starting Bridge udev events into upstart[ OK ]
  873. * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
  874. * Starting device node and kernel event manager[ OK ]
  875. * Starting load modules from /etc/modules[ OK ]
  876. * Starting cold plug devices[ OK ]
  877. * Starting log initial device creation[ OK ]
  878. * Starting Signal sysvinit that local filesystems are mounted[ OK ]
  879. * Starting restore software rfkill state[ OK ]
  880. * Stopping restore software rfkill state[ OK ]
  881. * Stopping load modules from /etc/modules[ OK ]
  882. * Starting flush early job output to logs[ OK ]
  883. * Stopping Mount filesystems on boot[ OK ]
  884. * Stopping flush early job output to logs[ OK ]
  885. * Starting system logging daemon[ OK ]
  886. * Starting D-Bus system message bus[ OK ]
  887. * Starting SystemD login management service[ OK ]
  888. * Starting mDNS/DNS-SD daemon[ OK ]
  889. * Starting bluetooth daemon[ OK ]
  890. * Starting unicast DNS configuration daemon[ OK ]
  891. * Starting Bridge file events into upstart[ OK ]
  892. * Starting configure network device security[ OK ]
  893. * Starting userspace bootsplash[ OK ]
  894. * Starting configure network device[ OK ]
  895. * Starting Send an event to indicate plymouth is up[ OK ]
  896. * Stopping userspace bootsplash[ OK ]
  897. * Starting CUPS printing spooler/server[ OK ]
  898. * Stopping Send an event to indicate plymouth is up[ OK ]
  899. * Starting configure network device security[ OK ]
  900. * Starting configure network device security[ OK ]
  901. * Starting configure network device security[ OK ]
  902. * Starting configure network device[ OK ]
  903. * Starting configure network device[ OK ]
  904. * Starting cups-browsed - Bonjour remote printer browsing daemon[ OK ]
  905. * Starting Mount network filesystems[ OK ]
  906. * Starting Failsafe Boot Delay[ OK ]
  907. * Stopping Mount network filesystems[ OK ]
  908. * Stopping cold plug devices[ OK ]
  909. * Starting configure network device[ OK ]
  910. * Stopping Failsafe Boot Delay[ OK ]
  911. No sensors found!
  912. Make sure you loaded all the kernel drivers you need.
  913. Try sensors-detect to find out which these are.
  914. * Starting System V initialisation compatibility[ OK ]
  915. * Starting modem connection manager[ OK ]
  916. * Starting configure network device security[ OK ]
  917. No sensors found!
  918. Make sure you loaded all the kernel drivers you need.
  919. Try sensors-detect to find out which these are.
  920. * Stopping log initial device creation[ OK ]
  921. [ OK ]ting sensors limits
  922. * Starting configure network device security[ OK ]
  923. * Starting save udev log and update rules[ OK ]
  924. * Stopping save udev log and update rules[ OK ]
  925. * Starting network connection manager[ OK ]
  926. [ OK ]ting up X socket directories...
  927.  
  928. Last login: Tue Jan 1 10:30:08 ACDT 2013 on ttySAC2
  929. Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.58+ armv7l)
  930.  
  931. * Documentation: https://help.ubuntu.com/
  932.  
  933. 0 packages can be updated.
  934. 0 updates are security updates.
  935.  
  936. * Stopping System V initialisation compatibility[ OK ]
  937. * Starting System V runlevel compatibility[ OK ]
  938. * Starting Restore Sound Card State[ OK ]
  939. * Starting anac(h)ronistic cron[ OK ]
  940. * Starting save kernel messages[ OK ]
  941. * Starting OpenSSH server[ OK ]
  942. * Starting regular background program processing daemon[ OK ]
  943. * Stopping Restore Sound Card State[ OK ]
  944. * Stopping anac(h)ronistic cron[ OK ]
  945. * Starting configure virtual network devices[ OK ]
  946. * Stopping save kernel messages[ OK ]
  947. * Starting crash report submission daemon[ OK ]
  948. * Starting automatic crash report generation[ OK ]
  949. [ OK ]rting NTP server ntpd
  950. saned disabled; edit /etc/default/saned
RAW Paste Data Copied