SHARE
TWEET

Untitled

a guest Jun 14th, 2017 29 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ; Generated with MatterSlice 1.0
  2. ; filamentDiameter = 1.734
  3. ; extrusionWidth = 0.4
  4. ; firstLayerExtrusionWidth = 0.52
  5. ; layerThickness = 0.25
  6. ; firstLayerThickness = 0.2
  7. ; automatic settings before start_gcode
  8. G21 ; set units to millimeters
  9. M107 ; fan off
  10. T0 ; set the active extruder to 0
  11. ; settings from start_gcode
  12. M104 S216
  13. M190 S62
  14. M109 S216
  15. G32
  16. ; automatic settings after start_gcode
  17. T0 ; set the active extruder to 0
  18. G90 ; use absolute coordinates
  19. G92 E0 ; reset the expected extruder position
  20. M82 ; use absolute distance for extrusion
  21. ; Layer count: 80
  22. ; Layer Change GCode
  23. ; LAYER:0
  24. ;M117 LAYER:0
  25. M400
  26. M107
  27. G0 F12000 X24.3 Y24.3 Z0.6
  28. ; TYPE:SKIRT
  29. G1 Z0.2
  30. G1 F3600 E0
  31. G1 F900 X-24.299 Y24.3 E2.14029
  32. G1 X-24.299 Y-24.299 E4.28058
  33. G1 X24.3 Y-24.299 E6.42087
  34. G1 X24.3 Y24.3 E8.56116
  35. G0 F12000 X23.78 Y23.78
  36. G1 F900 X-23.779 Y23.78 E10.65565
  37. G1 X-23.779 Y-23.779 E12.75014
  38. G1 X23.78 Y-23.779 E14.84463
  39. G1 X23.78 Y23.78 E16.93911
  40. G0 F12000 X23.26 Y23.26
  41. G1 F900 X-23.259 Y23.26 E18.9878
  42. G1 X-23.259 Y-23.259 E21.03649
  43. G1 X23.26 Y-23.259 E23.08518
  44. G1 X23.26 Y23.26 E25.13386
  45. G1 F3600 E23.33386
  46. G0 F900 X23.26 Y13.26
  47. G1 Z0.6
  48. G0 F12000 X22.8 Y22.8
  49. G0 X20 Y21.2
  50. G0 X20 Y20
  51. G0 X19.22 Y19.22
  52. G0 X-19.219 Y19.22
  53. G0 X-19.739 Y19.74
  54. ; TYPE:WALL-OUTER
  55. G1 Z0.2
  56. G1 F3600 E25.23386
  57. G1 F900 X-19.739 Y-19.739 E26.97251
  58. G1 X19.74 Y-19.739 E28.71116
  59. G1 X19.74 Y19.74 E30.4498
  60. G1 X-19.739 Y19.74 E32.18845
  61. G0 F12000 X-19.219 Y19.22
  62. ; TYPE:WALL-INNER
  63. G1 F900 X-19.219 Y-19.219 E33.8813
  64. G1 X19.22 Y-19.219 E35.57414
  65. G1 X19.22 Y19.22 E37.26699
  66. G1 X-19.219 Y19.22 E38.95983
  67. G0 F12000 X-18.655 Y18.849
  68. ; TYPE:BOTTOM-FILL
  69. G1 F900 X-18.849 Y18.655 E38.97192
  70. G0 F12000 X-18.849 Y17.92
  71. G1 F900 X-17.92 Y18.849 E39.02978
  72. G0 F12000 X-17.184 Y18.849
  73. G1 F900 X-18.849 Y17.184 E39.13347
  74. G0 F12000 X-18.849 Y16.449
  75. G1 F900 X-16.449 Y18.849 E39.28295
  76. G0 F12000 X-15.714 Y18.849
  77. G1 F900 X-18.849 Y15.714 E39.4782
  78. G0 F12000 X-18.849 Y14.978
  79. G1 F900 X-14.978 Y18.849 E39.7193
  80. G0 F12000 X-14.243 Y18.849
  81. G1 F900 X-18.849 Y14.243 E40.00616
  82. G0 F12000 X-18.849 Y13.507
  83. G1 F900 X-13.507 Y18.849 E40.33887
  84. G0 F12000 X-12.772 Y18.849
  85. G1 F900 X-18.849 Y12.772 E40.71736
  86. G0 F12000 X-18.849 Y12.037
  87. G1 F900 X-12.037 Y18.849 E41.14162
  88. G0 F12000 X-11.301 Y18.849
  89. G1 F900 X-18.849 Y11.301 E41.61172
  90. G0 F12000 X-18.849 Y10.566
  91. G1 F900 X-10.566 Y18.849 E42.1276
  92. G0 F12000 X-9.83 Y18.849
  93. G1 F900 X-18.849 Y9.83 E42.68932
  94. G0 F12000 X-18.849 Y9.095
  95. G1 F900 X-9.095 Y18.849 E43.29682
  96. G0 F12000 X-8.36 Y18.849
  97. G1 F900 X-18.849 Y8.36 E43.95009
  98. G0 F12000 X-18.849 Y7.624
  99. G1 F900 X-7.624 Y18.849 E44.6492
  100. G0 F12000 X-6.889 Y18.849
  101. G1 F900 X-18.849 Y6.889 E45.39409
  102. G0 F12000 X-18.849 Y6.153
  103. G1 F900 X-6.153 Y18.849 E46.18482
  104. G0 F12000 X-5.418 Y18.849
  105. G1 F900 X-18.849 Y5.418 E47.02132
  106. G0 F12000 X-18.849 Y4.683
  107. G1 F900 X-4.683 Y18.849 E47.90361
  108. G0 F12000 X-3.947 Y18.849
  109. G1 F900 X-18.849 Y3.947 E48.83173
  110. G0 F12000 X-18.849 Y3.212
  111. G1 F900 X-3.212 Y18.849 E49.80563
  112. G0 F12000 X-2.476 Y18.849
  113. G1 F900 X-18.849 Y2.476 E50.82536
  114. G0 F12000 X-18.849 Y1.741
  115. G1 F900 X-1.741 Y18.849 E51.89088
  116. G0 F12000 X-1.006 Y18.849
  117. G1 F900 X-18.849 Y1.006 E53.00217
  118. G0 F12000 X-18.849 Y0.27
  119. G1 F900 X-0.27 Y18.849 E54.1593
  120. G0 F12000 X0.464 Y18.849
  121. G1 F900 X-18.848 Y-0.463 E55.36209
  122. G0 F12000 X-18.848 Y-1.199
  123. G1 F900 X1.199 Y18.849 E56.61068
  124. G0 F12000 X1.935 Y18.849
  125. G1 F900 X-18.848 Y-1.934 E57.90508
  126. G0 F12000 X-18.848 Y-2.67
  127. G1 F900 X2.67 Y18.849 E59.24529
  128. G0 F12000 X3.406 Y18.849
  129. G1 F900 X-18.848 Y-3.405 E60.6313
  130. G0 F12000 X-18.848 Y-4.14
  131. G1 F900 X4.141 Y18.849 E62.06309
  132. G0 F12000 X4.876 Y18.849
  133. G1 F900 X-18.848 Y-4.876 E63.5407
  134. G0 F12000 X-18.848 Y-5.611
  135. G1 F900 X5.612 Y18.849 E65.06411
  136. G0 F12000 X6.347 Y18.849
  137. G1 F900 X-18.848 Y-6.346 E66.63329
  138. G0 F12000 X-18.848 Y-7.082
  139. G1 F900 X7.083 Y18.849 E68.24832
  140. G0 F12000 X7.818 Y18.849
  141. G1 F900 X-18.848 Y-7.817 E69.90912
  142. G0 F12000 X-18.848 Y-8.553
  143. G1 F900 X8.553 Y18.849 E71.61573
  144. G0 F12000 X9.289 Y18.849
  145. G1 F900 X-18.848 Y-9.288 E73.36815
  146. G0 F12000 X-18.848 Y-10.023
  147. G1 F900 X10.024 Y18.849 E75.16635
  148. G0 F12000 X10.76 Y18.849
  149. G1 F900 X-18.848 Y-10.759 E77.01038
  150. G0 F12000 X-18.848 Y-11.494
  151. G1 F900 X11.495 Y18.849 E78.9002
  152. G0 F12000 X12.23 Y18.849
  153. G1 F900 X-18.848 Y-12.23 E80.83582
  154. G0 F12000 X-18.848 Y-12.965
  155. G1 F900 X12.966 Y18.849 E82.81725
  156. G0 F12000 X13.701 Y18.849
  157. G1 F900 X-18.848 Y-13.7 E84.84445
  158. G0 F12000 X-18.848 Y-14.436
  159. G1 F900 X14.436 Y18.849 E86.91747
  160. G0 F12000 X15.172 Y18.849
  161. G1 F900 X-18.848 Y-15.171 E89.03629
  162. G0 F12000 X-18.848 Y-15.907
  163. G1 F900 X15.907 Y18.849 E91.20092
  164. G0 F12000 X16.643 Y18.849
  165. G1 F900 X-18.848 Y-16.642 E93.41136
  166. G0 F12000 X-18.848 Y-17.377
  167. G1 F900 X17.378 Y18.849 E95.66758
  168. G0 F12000 X18.113 Y18.849
  169. G1 F900 X-18.848 Y-18.113 E97.9696
  170. G0 F12000 X-18.848 Y-18.848
  171. G1 F900 X18.849 Y18.849 E100.31743
  172. G0 F12000 X18.849 Y18.113
  173. G1 F900 X-18.113 Y-18.848 E102.61946
  174. G0 F12000 X-17.377 Y-18.848
  175. G1 F900 X18.849 Y17.378 E104.87567
  176. G0 F12000 X18.849 Y16.643
  177. G1 F900 X-16.642 Y-18.848 E107.08611
  178. G0 F12000 X-15.907 Y-18.848
  179. G1 F900 X18.849 Y15.907 E109.25074
  180. G0 F12000 X18.849 Y15.172
  181. G1 F900 X-15.171 Y-18.848 E111.36956
  182. G0 F12000 X-14.436 Y-18.848
  183. G1 F900 X18.849 Y14.436 E113.44258
  184. G0 F12000 X18.849 Y13.701
  185. G1 F900 X-13.7 Y-18.848 E115.46979
  186. G0 F12000 X-12.965 Y-18.848
  187. G1 F900 X18.849 Y12.966 E117.45121
  188. G0 F12000 X18.849 Y12.23
  189. G1 F900 X-12.23 Y-18.848 E119.38684
  190. G0 F12000 X-11.494 Y-18.848
  191. G1 F900 X18.849 Y11.495 E121.27665
  192. G0 F12000 X18.849 Y10.76
  193. G1 F900 X-10.759 Y-18.848 E123.12068
  194. G0 F12000 X-10.023 Y-18.848
  195. G1 F900 X18.849 Y10.024 E124.91888
  196. G0 F12000 X18.849 Y9.289
  197. G1 F900 X-9.288 Y-18.848 E126.6713
  198. G0 F12000 X-8.553 Y-18.848
  199. G1 F900 X18.849 Y8.553 E128.37791
  200. G0 F12000 X18.849 Y7.818
  201. G1 F900 X-7.817 Y-18.848 E130.03871
  202. G0 F12000 X-7.082 Y-18.848
  203. G1 F900 X18.849 Y7.083 E131.65374
  204. G0 F12000 X18.849 Y6.347
  205. G1 F900 X-6.346 Y-18.848 E133.22293
  206. G0 F12000 X-5.611 Y-18.848
  207. G1 F900 X18.849 Y5.612 E134.74634
  208. G0 F12000 X18.849 Y4.876
  209. G1 F900 X-4.876 Y-18.848 E136.22394
  210. G0 F12000 X-4.14 Y-18.848
  211. G1 F900 X18.849 Y4.141 E137.65573
  212. G0 F12000 X18.849 Y3.406
  213. G1 F900 X-3.405 Y-18.848 E139.04175
  214. G0 F12000 X-2.67 Y-18.848
  215. G1 F900 X18.849 Y2.67 E140.38196
  216. G0 F12000 X18.849 Y1.935
  217. G1 F900 X-1.934 Y-18.848 E141.67636
  218. G0 F12000 X-1.199 Y-18.848
  219. G1 F900 X18.849 Y1.199 E142.92495
  220. G0 F12000 X18.849 Y0.464
  221. G1 F900 X-0.463 Y-18.848 E144.12773
  222. G0 F12000 X0.27 Y-18.849
  223. G1 F900 X18.849 Y-0.27 E145.28486
  224. G0 F12000 X18.849 Y-1.006
  225. G1 F900 X1.006 Y-18.849 E146.39615
  226. G0 F12000 X1.741 Y-18.849
  227. G1 F900 X18.849 Y-1.741 E147.46167
  228. G0 F12000 X18.849 Y-2.476
  229. G1 F900 X2.476 Y-18.849 E148.48141
  230. G0 F12000 X3.212 Y-18.849
  231. G1 F900 X18.849 Y-3.212 E149.45531
  232. G0 F12000 X18.849 Y-3.947
  233. G1 F900 X3.947 Y-18.849 E150.38343
  234. G0 F12000 X4.683 Y-18.849
  235. G1 F900 X18.849 Y-4.683 E151.26571
  236. G0 F12000 X18.849 Y-5.418
  237. G1 F900 X5.418 Y-18.849 E152.10221
  238. G0 F12000 X6.153 Y-18.849
  239. G1 F900 X18.849 Y-6.153 E152.89294
  240. G0 F12000 X18.849 Y-6.889
  241. G1 F900 X6.889 Y-18.849 E153.63783
  242. G0 F12000 X7.624 Y-18.849
  243. G1 F900 X18.849 Y-7.624 E154.33694
  244. G0 F12000 X18.849 Y-8.36
  245. G1 F900 X8.36 Y-18.849 E154.99022
  246. G0 F12000 X9.095 Y-18.849
  247. G1 F900 X18.849 Y-9.095 E155.59771
  248. G0 F12000 X18.849 Y-9.83
  249. G1 F900 X9.83 Y-18.849 E156.15943
  250. G0 F12000 X10.566 Y-18.849
  251. G1 F900 X18.849 Y-10.566 E156.67531
  252. G0 F12000 X18.849 Y-11.301
  253. G1 F900 X11.301 Y-18.849 E157.14541
  254. G0 F12000 X12.037 Y-18.849
  255. G1 F900 X18.849 Y-12.037 E157.56967
  256. G0 F12000 X18.849 Y-12.772
  257. G1 F900 X12.772 Y-18.849 E157.94816
  258. G0 F12000 X13.507 Y-18.849
  259. G1 F900 X18.849 Y-13.507 E158.28087
  260. G0 F12000 X18.849 Y-14.243
  261. G1 F900 X14.243 Y-18.849 E158.56774
  262. G0 F12000 X14.978 Y-18.849
  263. G1 F900 X18.849 Y-14.978 E158.80883
  264. G0 F12000 X18.849 Y-15.714
  265. G1 F900 X15.714 Y-18.849 E159.00408
  266. G0 F12000 X16.449 Y-18.849
  267. G1 F900 X18.849 Y-16.449 E159.15356
  268. G0 F12000 X18.849 Y-17.184
  269. G1 F900 X17.184 Y-18.849 E159.25726
  270. G0 F12000 X17.92 Y-18.849
  271. G1 F900 X18.849 Y-17.92 E159.31512
  272. G0 F12000 X18.849 Y-18.655
  273. G1 F900 X18.655 Y-18.849 E159.3272
  274. ; Layer Change GCode
  275. ; LAYER:1
  276.  
  277. ; LAYER:10
  278. ;M117 LAYER:10
  279. G1 F3600 E556.76978
  280. G0 F2340 X12.078 Y12.078
  281. G1 Z2.85
  282. G0 F12000 X19.149 Y19.149 Z3.1
  283. G0 X-19.399 Y19.4
  284. G0 X-19.799 Y19.8
  285. G0 X-19.399 Y19.4
  286. ; TYPE:WALL-INNER
  287. G1 Z2.7
  288. G1 F3600 E558.66978
  289. G1 F1800 X-19.399 Y-19.399 E560.31276
  290. G1 X19.4 Y-19.399 E561.95574
  291. G1 X19.4 Y19.4 E563.59872
  292. G1 X-19.399 Y19.4 E565.2417
  293. G0 F12000 X-19.799 Y19.8
  294. ; TYPE:WALL-OUTER
  295. G1 F1080 X-19.799 Y-19.799 E566.91856
  296. G1 X19.8 Y-19.799 E568.59542
  297. G1 X19.8 Y19.8 E570.27227
  298. G1 X-19.799 Y19.8 E571.94913
  299. G0 F12000 X-19.399 Y19.4
  300. G0 X-17.554 Y19.149
  301. ; TYPE:FILL
  302. G1 F2340 X-7.292 Y-19.147 E573.62802
  303. G0 F12000 X-2.177 Y-19.148
  304. G1 F2340 X19.149 Y2.179 E574.90519
  305. G0 F12000 X19.149 Y7.292
  306. G1 F2340 X-19.148 Y17.554 E576.58412
  307. G0 F12000 X-19.149 Y14.791
  308. G1 F2340 X-14.791 Y19.149 E576.84511
  309. G0 F12000 X-5.131 Y19.149
  310. G1 F2340 X5.13 Y-19.148 E578.52403
  311. G0 F12000 X14.791 Y-19.149
  312. G1 F2340 X19.149 Y-14.791 E578.78502
  313. G0 F12000 X19.149 Y-17.554
  314. G1 F2340 X-19.147 Y-7.292 E580.46391
  315. G0 F12000 X-19.148 Y-2.177
  316. G1 F2340 X2.179 Y19.149 E581.74107
  317. G0 F12000 X7.292 Y19.149
  318. G1 F2340 X17.554 Y-19.148 E583.42001
  319. G0 F12000 X19.149 Y-5.131
  320. G1 F2340 X-19.148 Y5.13 E585.09893
  321. G0 F12000 X-19.148 Y-19.148
  322. G1 F2340 X19.149 Y19.149 E587.39239
  323. M400
  324. M107
  325. M104 S0 ; turn off temperature
  326. M140 S0
  327. G91
  328. G1 Z10 E-3.0 F12000
  329. G90
  330. G28
  331. M84     ; disable motors
  332. ; filament used = 3217.4
  333. ; filament used extruder 1 (mm) = 3217.4
  334. ; filament used extruder 2 (mm) = 0.0
  335. ; total print time (s) = 27037
  336. ; MatterControl Version 1.7.0 Build 1.7.0.8481 : GCode settings used
  337. ; Date 06/12/2017 00:00:00 Time 13:58
  338. ; numberOfBottomLayers = 2
  339. ; numberOfPerimeters = 2
  340. ; raftExtraDistanceAroundPart = 5
  341. ; numberOfSkirtLoops = 3
  342. ; supportInterfaceLayers = 1
  343. ; numberOfTopLayers = 3
  344. ; numberOfBrimLoops = 0
  345. ; outsidePerimeterExtrusionWidth = 0.4
  346. ; outsidePerimeterSpeed = 30
  347. ; firstLayerSpeed = 15
  348. ; raftPrintSpeed = 30
  349. ; topInfillSpeed = 35
  350. ; firstLayerExtrusionWidth = 0.52
  351. ; firstLayerThickness = 0.2
  352. ; extruderOffsets = [[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0],[0,0]]
  353. ; beforeToolchangeCode =
  354. ; endCode = M104 S0 ; turn off temperature\nM140 S0\nG91\nG1 Z10 E-3.0 F12000\nG90\nG28 \nM84     ; disable motors
  355. ; toolChangeCode =
  356. ; minimumTravelToCauseRetraction = 4
  357. ; retractionOnTravel = 1.8
  358. ; retractionZHop = 0.4
  359. ; unretractExtraExtrusion = 0.1
  360. ; retractionSpeed = 60
  361. ; bridgeFanSpeedPercent = 100
  362. ; bridgeSpeed = 30
  363. ; firstLayerToAllowFan = 2
  364. ; extrusionMultiplier = 1
  365. ; infillStartingAngle = 45
  366. ; infillExtendIntoPerimeter = 0.15
  367. ; infillSpeed = 65
  368. ; infillType = TRIANGLES
  369. ; layerChangeCode = ; LAYER:[layer_num]\n;M117 LAYER:[layer_num]
  370. ; fanSpeedMaxPercent = 75
  371. ; minimumExtrusionBeforeRetraction = 1
  372. ; fanSpeedMinPercent = 40
  373. ; minimumPrintingSpeed = 18
  374. ; insidePerimetersSpeed = 50
  375. ; raftAirGap = 0.23
  376. ; raftFanSpeedPercent = 100
  377. ; retractionOnExtruderSwitch = 2.1
  378. ; unretractExtraOnExtruderSwitch = 0
  379. ; skirtDistanceFromObject = 3
  380. ; minimumLayerTimeSeconds = 30
  381. ; supportAirGap = 0.6
  382. ; supportInfillStartingAngle = 45
  383. ; supportPercent = 10
  384. ; supportLineSpacing = 4
  385. ; supportMaterialSpeed = 40
  386. ; supportXYDistanceFromObject = 1
  387. ; supportType = LINES
  388. ; travelSpeed = 200
  389. ; wipeShieldDistanceFromObject = 0
  390. ; wipeTowerSize = 0
  391. ; zOffset = 0
  392. ; bottomClipAmount = 0
  393. ; filamentDiameter = 1.734
  394. ; layerThickness = 0.25
  395. ; extrusionWidth = 0.4
  396. ; avoidCrossingPerimeters = True
  397. ; enableRaft = False
  398. ; outsidePerimetersFirst = False
  399. ; outputOnlyFirstLayer = False
  400. ; retractWhenChangingIslands = True
  401. ; generateSupport = False
  402. ; generateInternalSupport = False
  403. ; generateSupportPerimeter = True
  404. ; wipeAfterRetraction = True
  405. ; centerObjectInXy = True
  406. ; expandThinWalls = True
  407. ; MergeOverlappingLines = True
  408. ; fillThinGaps = True
  409. ; continuousSpiralOuterPerimeter = False
  410. ; positionToPlaceObjectCenter = [0,0]
  411. ; startCode = ; automatic settings before start_gcode\nG21 ; set units to millimeters\nM107 ; fan off\nT0 ; set the active extruder to 0\n; settings from start_gcode\nM104 S216\nM190 S62\nM109 S216\nG28\nG32\n; automatic settings after start_gcode\nT0 ; set the active extruder to 0\nG90 ; use absolute coordinates\nG92 E0 ; reset the expected extruder position\nM82 ; use absolute distance for extrusion
  412. ; infillPercent = 10
  413. ; perimeterStartEndOverlapRatio = 1.005
  414. ; skirtMinLength = 408.564135968685
  415. ; supportExtrusionPercent = 120
  416. ; raftExtruder = -1
  417. ; supportExtruder = 0
  418. ; supportInterfaceExtruder = 0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top