Guest User

Untitled

a guest
Dec 15th, 2019
244
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <5>[ 0.000000] Linux version 3.18.140 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #61441 Tue Dec 10 03:07:34 +04 2019
  2. <6>[ 0.000000] bootconsole [early0] enabled
  3. <6>[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  4. <6>[ 0.000000] ref 25000000, cpu 775000000, ddr 650000000, ahb 258333333
  5. <6>[ 0.000000] sys id = 1150 Qualcomm Atheros QCA9563 ver 1 rev 1.0 (0x1150)
  6. <6>[ 0.000000] Determined physical RAM map:
  7. <6>[ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. <4>[ 0.000000] Zone ranges:
  9. <4>[ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  10. <4>[ 0.000000] Movable zone start for each node
  11. <4>[ 0.000000] Early memory node ranges
  12. <4>[ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  13. <6>[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
  14. <7>[ 0.000000] On node 0 totalpages: 32768
  15. <7>[ 0.000000] free_area_init_node: node 0, pgdat 8030f780, node_mem_map 81000000
  16. <7>[ 0.000000] Normal zone: 256 pages used for memmap
  17. <7>[ 0.000000] Normal zone: 0 pages reserved
  18. <7>[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  19. <4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes.
  20. <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  21. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  22. <7>[ 0.000000] pcpu-alloc: [0] 0
  23. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  24. <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
  25. <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  26. <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  27. <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. <6>[ 0.000000] Writing ErrCtl register=00000000
  29. <6>[ 0.000000] Readback ErrCtl register=00000000
  30. <4>[ 0.000000] Memory: 126368K/131072K available (2439K kernel code, 152K rwdata, 244K rodata, 160K init, 143K bss, 4704K reserved, 0K cma-reserved)
  31. <6>[ 0.000000] NR_IRQS:83
  32. <6>[ 0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  33. <6>[ 0.060000] pid_max: default: 32768 minimum: 301
  34. <6>[ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  35. <6>[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  36. <6>[ 0.070000] NET: Registered protocol family 16
  37. <4>[ 0.280000] registering PCI controller with io_map_base unset
  38. <6>[ 0.290000] PCI host bridge to bus 0000:00
  39. <6>[ 0.300000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
  40. <6>[ 0.300000] pci_bus 0000:00: root bus resource [io 0x0001]
  41. <6>[ 0.310000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  42. <7>[ 0.310000] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
  43. <7>[ 0.310000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  44. <7>[ 0.310000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  45. <7>[ 0.310000] pci 0000:00:00.0: supports D1 D2
  46. <7>[ 0.310000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  47. <6>[ 0.310000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  48. <6>[ 0.320000] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  49. <6>[ 0.320000] pci 0000:00:00.0: using irq 72 for pin 1
  50. <6>[ 0.330000] Switched to clocksource MIPS
  51. <6>[ 0.330000] NET: Registered protocol family 2
  52. <6>[ 0.340000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  53. <6>[ 0.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  54. <6>[ 0.350000] TCP: Hash tables configured (established 1024 bind 1024)
  55. <6>[ 0.350000] TCP: reno registered
  56. <6>[ 0.360000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  57. <6>[ 0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  58. <6>[ 0.370000] NET: Registered protocol family 1
  59. <7>[ 0.370000] PCI: CLS 0 bytes, default 32
  60. <5>[ 0.370000] gpio_proc: module loaded and /proc/gpio/ created (cool)
  61. <5>[ 0.380000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
  62. <6>[ 0.390000] futex hash table entries: 256 (order: -1, 3072 bytes)
  63. <6>[ 0.390000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  64. <6>[ 0.400000] msgmni has been set to 246
  65. <6>[ 0.400000] io scheduler noop registered
  66. <6>[ 0.410000] io scheduler deadline registered (default)
  67. <6>[ 0.410000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  68. <6>[ 0.420000] console [ttyS0] disabled
  69. <6>[ 0.440000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  70. <6>[ 0.450000] console [ttyS0] enabled
  71. <6>[ 0.460000] bootconsole [early0] disabled
  72. <6>[ 0.470000] jedec ID EF4018
  73. <6>[ 0.470000] flash size 16777216B, sector count = 256
  74. <0>[ 0.480000] scanning for root partition
  75. <0>[ 0.480000] uboot detected
  76. <0>[ 0.480000] guessed bootloader size = C0000
  77. <0>[ 0.510000]
  78. <0>[ 0.510000] found squashfs at 1E0000
  79. <6>[ 0.520000] adjusted length EA0000, original length E9E4C6
  80. <5>[ 0.520000] Creating 9 MTD partitions on "ar7240-nor0":
  81. <5>[ 0.530000] 0x000000000000-0x0000000c0000 : "RedBoot"
  82. <5>[ 0.530000] 0x0000000c0000-0x000000ef0000 : "linux"
  83. <5>[ 0.540000] 0x0000001e0000-0x000000ea0000 : "rootfs"
  84. <5>[ 0.540000] mtd: partition "rootfs" set to be root filesystem
  85. <5>[ 0.550000] 0x000000ea0000-0x000000ef0000 : "ddwrt"
  86. <5>[ 0.550000] 0x000000ef0000-0x000000f00000 : "nvram"
  87. <5>[ 0.560000] 0x000000ff0000-0x000001000000 : "board_config"
  88. <5>[ 0.570000] 0x000000000000-0x000001000000 : "fullflash"
  89. <5>[ 0.570000] 0x000000000000-0x0000000c0000 : "fullboot"
  90. <5>[ 0.580000] 0x0000000b0000-0x0000000c0000 : "uboot-env"
  91. <6>[ 0.580000] libphy: Fixed MDIO Bus: probed
  92. <6>[ 0.590000] u32 classifier
  93. <6>[ 0.600000] Performance counters on
  94. <6>[ 0.600000] input device check on
  95. <6>[ 0.600000] Actions configured
  96. <6>[ 0.610000] Netfilter messages via NETLINK v0.30.
  97. <6>[ 0.610000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
  98. <4>[ 0.620000] nf_conntrack_rtsp v0.7 loading
  99. <4>[ 0.620000] nf_nat_rtsp v0.7 loading
  100. <6>[ 0.630000] ip_tables: (C) 2000-2006 Netfilter Core Team
  101. <6>[ 0.630000] TCP: bic registered
  102. <6>[ 0.640000] TCP: cubic registered
  103. <6>[ 0.640000] TCP: westwood registered
  104. <6>[ 0.640000] TCP: hybla registered
  105. <6>[ 0.650000] TCP: vegas registered
  106. <6>[ 0.650000] NET: Registered protocol family 17
  107. <6>[ 0.650000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  108. <5>[ 0.670000] Bridge firewalling registered
  109. <6>[ 0.670000] 8021q: 802.1Q VLAN Support v1.8
  110. <6>[ 0.680000] searching for nvram
  111. <6>[ 0.680000] nvram size = 65536
  112. <6>[ 0.720000] Atheros AR71xx hardware watchdog driver version 0.1.0
  113. <6>[ 0.730000] ar71xx-wdt: timeout=15 secs (max=16) ref freq=258333333
  114. <6>[ 0.750000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  115. <6>[ 0.760000] Freeing unused kernel memory: 160K
  116. <7>[ 3.390000] ar71xx-wdt: enabling watchdog timer
  117. <6>[ 3.490000] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0
  118. <6>[ 4.230000] libphy: ag71xx_mdio: probed
  119. <6>[ 4.820000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
  120. <6>[ 4.830000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
  121. <6>[ 5.850000] Loading modules backported from Linux version wireless-drivers-next-for-davem-2017-09-01-0-geb464d4a8d09
  122. <6>[ 5.860000] Backport generated by backports.git backports-20160324-111-g97b8d7c4
  123. <7>[ 6.530000] ath: EEPROM regdomain: 0x0
  124. <7>[ 6.530000] ath: EEPROM indicates default country code should be used
  125. <7>[ 6.530000] ath: doing EEPROM country->regdmn map search
  126. <7>[ 6.530000] ath: country maps to regdmn code: 0x3a
  127. <7>[ 6.530000] ath: Country alpha2 being used: US
  128. <7>[ 6.530000] ath: Regpair used: 0x3a
  129. <7>[ 6.540000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  130. <6>[ 6.540000] ieee80211 phy0: Atheros AR9561 Rev:0 mem=0xb8100000, irq=79
  131. <6>[ 6.850000] eth0: link up (1000Mbps/Full duplex)
  132. <0>[ 7.060000] 2 vs 0
  133. <4>[ 7.070000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  134. <6>[ 7.070000] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  135. <4>[ 7.280000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
  136. <4>[ 7.290000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
  137. <4>[ 7.300000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
  138. <6>[ 7.550000] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
  139. <6>[ 7.560000] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
  140. <6>[ 7.570000] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
  141. <4>[ 7.610000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  142. <6>[ 7.620000] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 ec2ad8ad
  143. <4>[ 7.720000] ath10k_pci 0000:00:00.0: otp stream is empty, using board.bin contents
  144. <4>[ 8.790000] ath10k_pci 0000:00:00.0: 10.2 wmi init: vdevs: 16 peers: 134 tid: 256
  145. <6>[ 8.810000] wmi print 'P 135 V 16 T 433'
  146. <6>[ 8.820000] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
  147. <6>[ 8.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
  148. <6>[ 8.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
  149. <6>[ 8.870000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up
  150. <7>[ 8.940000] ath: EEPROM regdomain: 0x0
  151. <7>[ 8.940000] ath: EEPROM indicates default country code should be used
  152. <7>[ 8.940000] ath: doing EEPROM country->regdmn map search
  153. <7>[ 8.940000] ath: country maps to regdmn code: 0x3a
  154. <7>[ 8.940000] ath: Country alpha2 being used: US
  155. <7>[ 8.940000] ath: Regpair used: 0x3a
  156. <6>[ 10.890000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  157. <6>[ 11.350000] device br0 entered promiscuous mode
  158. <6>[ 11.360000] using kernel STP
  159. <6>[ 11.440000] device vlan1 entered promiscuous mode
  160. <6>[ 11.440000] device eth0 entered promiscuous mode
  161. <6>[ 11.460000] br0: port 1(vlan1) entered listening state
  162. <6>[ 11.470000] br0: port 1(vlan1) entered listening state
  163. <6>[ 11.470000] device br0 left promiscuous mode
  164. <6>[ 11.480000] device br0 entered promiscuous mode
  165. <6>[ 11.500000] device br0 left promiscuous mode
  166. <7>[ 11.620000] ath: EEPROM regdomain: 0x804c
  167. <7>[ 11.620000] ath: EEPROM indicates we should expect a country code
  168. <7>[ 11.620000] ath: doing EEPROM country->regdmn map search
  169. <7>[ 11.620000] ath: country maps to regdmn code: 0x3b
  170. <7>[ 11.620000] ath: Country alpha2 being used: BR
  171. <7>[ 11.620000] ath: Regpair used: 0x3b
  172. <7>[ 11.620000] ath: regdomain 0x804c dynamically updated by user
  173. <7>[ 11.620000] ath: EEPROM regdomain: 0x804c
  174. <7>[ 11.620000] ath: EEPROM indicates we should expect a country code
  175. <7>[ 11.620000] ath: doing EEPROM country->regdmn map search
  176. <7>[ 11.620000] ath: country maps to regdmn code: 0x3b
  177. <7>[ 11.620000] ath: Country alpha2 being used: BR
  178. <7>[ 11.620000] ath: Regpair used: 0x3b
  179. <7>[ 11.620000] ath: regdomain 0x804c dynamically updated by user
  180. <6>[ 16.580000] device ath0 entered promiscuous mode
  181. <5>[ 16.890000] random: hostapd urandom read with 35 bits of entropy available
  182. <6>[ 16.920000] br0: port 2(ath0) entered listening state
  183. <6>[ 16.920000] br0: port 2(ath0) entered listening state
  184. <4>[ 17.630000] ath10k_pci 0000:00:00.0: otp stream is empty, using board.bin contents
  185. <4>[ 18.740000] ath10k_pci 0000:00:00.0: 10.2 wmi init: vdevs: 16 peers: 134 tid: 256
  186. <6>[ 18.760000] wmi print 'P 135 V 16 T 433'
  187. <6>[ 18.800000] device ath1 entered promiscuous mode
  188. <6>[ 19.120000] br0: port 3(ath1) entered listening state
  189. <6>[ 19.120000] br0: port 3(ath1) entered listening state
  190. <6>[ 19.950000] device vlan2 entered promiscuous mode
  191. <1>[ 20.130000] fast-classifier (PBR safe v2.1.6b): starting up
  192. <1>[ 20.140000] fast-classifier: registered
  193. <4>[ 20.940000] ipt_TRIGGER: module license 'unspecified' taints kernel.
  194. <4>[ 20.940000] Disabling lock debugging due to kernel taint
  195. <6>[ 21.980000] device vlan2 left promiscuous mode
  196. <6>[ 26.480000] br0: port 1(vlan1) entered learning state
  197. <6>[ 31.960000] br0: port 2(ath0) entered learning state
  198. <6>[ 34.160000] br0: port 3(ath1) entered learning state
  199. <5>[ 37.020000] random: nonblocking pool is initialized
  200. <6>[ 41.520000] br0: topology change detected, propagating
  201. <6>[ 41.520000] br0: port 1(vlan1) entered forwarding state
  202. <6>[ 47.010000] br0: topology change detected, propagating
  203. <6>[ 47.010000] br0: port 2(ath0) entered forwarding state
  204. <6>[ 49.200000] br0: topology change detected, propagating
  205. <6>[ 49.200000] br0: port 3(ath1) entered forwarding state
RAW Paste Data